Hi Team,
Last night my phone battery level was at 10% and i plugged it into the wall charger. it was working (am sure abt that) and i checked few mail, FB etc and went to sleep.
today morning, i when i checked the phone, it was shwoing the boot screen where its showing GT-1900 (in white font) and when i pressed the home button, it went away.
then, i tried to boot my phone, but it was not booting...i kept in the charger for another 2 hours, nothing worked. i placed a new battery, still the phone didnt come up...i kept the phone for 5-6 hours idle by removing battery, sim, sd card and tried again , no joy.
i tried the three button combination to get it into the download mode or recovery mode, that also not working....
but when charging, the phone is hot as normal...
any idea what could be the case?...anyway i ordered a USB jig from ebay....
my phone is JB and its international version...not rooted, no custom ROMs etc..
any help is much appreciated.
Strange!
Let's what a Jig can do then..
Does it heat up around the camera when charging?
"To err is human, to forgive is divine"
Sent from my SGS II
You're gonna need some help for this, so go get a friend, gf, parent, brother, sister or whoever.
Take the battery out, press the download combo, tell your helper to insert the battery back. See if you can get to DL mode.
At least you'll get something to try till the jig arrives.
Sent from the little guy
Now that's really strange....I've never heard about anything like this.Do you have your warranty?Because if it's stock,they will repair it.
Yes, its hot near the camera area....am expecting my jig to arrive sometime tomorrow.....
GamingDj said:
Now that's really strange....I've never heard about anything like this.Do you have your warranty?Because if it's stock,they will repair it.
Click to expand...
Click to collapse
No, i am out of warranty.....
smilingcruel said:
No, i am out of warranty.....
Click to expand...
Click to collapse
Then you'll have to wait for your jig to arrive.If that doesn't work either,then you will have to try a JTAG.
Jtagging is unlikely to work, all of this suggests faulty hardware.
But hey, the OP's got nothing to lose.
Sent from the little guy
gastonw said:
Jtagging is unlikely to work, all of this suggests faulty hardware.
But hey, the OP's got nothing to lose.
Sent from the little guy
Click to expand...
Click to collapse
Oh no..dont say that...SGS2 is my life...it was difficult for me to buy that phone back in 2011, i saved every month like 3-4 months to buy that...
anyway, i am hoping that jig will save my sweetie....(also am praying to god also)....hope for the best.....
also i saved few bucks for buying a S4 also and one mobile shop agreed to take it for $120 ... is that a fair enough price for my SGS2???
I'd pay up to $200 and I'd never sell it.
So I guess you could fight $150.
First off, get it to work again, otherwise you would be selling a donor phone.
Sent from the little guy
Ok....so from what I've read, you have no recovery and no download modes?.....
When you plug the charger in, do you get the "battery charging" indicator on the screen?
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
keithross39 said:
Ok....so from what I've read, you have no recovery and no download modes?.....
When you plug the charger in, do you get the "battery charging" indicator on the screen?
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Click to expand...
Click to collapse
No, am not seeing anything...
today i got my usb jig and that also didnt worked...
but when i plug in the charger, the area around the camera is hot as usual.....
is my motherboard gone? i tried different options but nothing worked....
No recovery
No download
No battery indication when plugged in......
From what I've read in other parts of this forum, I'm sorry to say that it appears that your phone is about as dead as it's possible to get.....
What country do you live in?....
In the EU, we get a 2 year warranty from Samsung....I'd explore that route first.....
If you don't get anywhere that way, then the last three options are.....
1) JTAG
2) Replace parts with a donor phone
3) Buy a new phone
Option one....probably won't work
Option two....feasible....if you're confident with that sort of work....and a damn site cheaper than option three.........
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
smilingcruel said:
Yes, its hot near the camera area....am expecting my jig to arrive sometime tomorrow.....
Click to expand...
Click to collapse
Yes I believe that's the problem of the new update. I updated my galaxy s2 to official jelly bean, I was having tons of problems. When I connected the charger for charging, it was actually discharging and the phone would get heated up very much. The reason being is when I bought the phone I had 2.3.4 then updated to 2.3.6 then 4 then 4.1. In official updates we don't clear caches which may lead to such problems. That's when I decided to root my phone. I am using custom rom now.
I recommend you to take your phone to samsung care rather than doing anything on your own. If you're not on warranty they will charge you few bucks for the repair. More importantly you will get to know about the problem. If the problem is with the hardware, you can't do anything by yourself, that's why I recommend you to go to samsung care. When you get it repaired, root it and have your custom rom installed. You won't regret. Hope I was helpful.
Sent from my GT-I9100 using xda app-developers app
There's nothing wrong with upgrading to JB, if you look closely you'll see that we (people who know at least a little of how our device works) never experience any of all these issues users keep posting.
They'd always keep some info to themselves and that info is always a f*#k up.
Sent from the little guy
Related
My friends just bought s2 for 5 days and didnt do any mods on it. So can say his phone is still a virgin. And suddenly this morning his phone can not turn on. Cant get into download/recovery mode. Hold down power button for 10seconds also no use. Is it using Jig is the only way to save his phone beside using warranty?
Obvious one first - sure the battery is charged?
Sounds daft, but seen it happen (and done it myself )
B3311 said:
Obvious one first - sure the battery is charged?
Sounds daft, but seen it happen (and done it myself )
Click to expand...
Click to collapse
Yes the battery is fully charged
You say "no mods" so why would you think about using a jig?
idi0t said:
My friends just bought s2 for 5 days and didnt do any mods on it. So can say his phone is still a virgin. And suddenly this morning his phone can not turn on. Cant get into download/recovery mode. Hold down power button for 10seconds also no use. Is it using Jig is the only way to save his phone beside using warranty?
Jig will only boot to download mode once in download mode its a question of flashing a stock Samsung rom.
5 days old no contest return to seller .
jje
Click to expand...
Click to collapse
Maybe a jig will work, but there's no backup to reflash.. I'm still jigless, there are many better qualified here than me, but I'm pretty sure a jig won't help if the phone is 100% hardbricked.
Anything at all happen when connected via USB to pc? Again, doubtful it will work, but worth a try
Sounds like a major hardware failure - I'd send it back pronto.
Edit - jj beat me too it. Is the phone new or second hand?
What i mean no mod is everything still running stock firmware original from factory. No roots etc. Nothing happened when attached to computer/laptop using cable data. I also guess its a hardware failure.
Anyways thank you all very much for all the infos. Guess my friend have to use his warranty. Never used my warranty although my phone counter already reached 70 hehehe
what i did when this hapened to me was charged it for couple hours plugged it into pc left it a few mins unplugged re-tried the same thing over and over and eventually pc gave me the connection sound which put a smile on my face which then booted into download mode and flashed stock rom through odin, if that fails to work then get it sent back to seller if it hasnt been flashed modded then a return and exchange/repair wont be a problem at all
idi0t said:
What i mean no mod is everything still running stock firmware original from factory. No roots etc. Nothing happened when attached to computer/laptop using cable data. I also guess its a hardware failure.
Anyways thank you all very much for all the infos. Guess my friend have to use his warranty. Never used my warranty although my phone counter already reached 70 hehehe
Click to expand...
Click to collapse
Just a question: How is the phone going to get bricked if you didn't do absolutely anything flashing related? Just give it back to the shop and get a new one if it's faulty, before it's too late. Also, maybe the battery was faulty and died; have you tried with another battery?
iamsloany said:
what i did when this hapened to me was charged it for couple hours plugged it into pc left it a few mins unplugged re-tried the same thing over and over and eventually pc gave me the connection sound which put a smile on my face which then booted into download mode and flashed stock rom through odin, if that fails to work then get it sent back to seller if it hasnt been flashed modded then a return and exchange/repair wont be a problem at all
Click to expand...
Click to collapse
Thx alot for your info. Will ask my friend to try it.
Astrofrigo said:
Just a question: How is the phone going to get bricked if you didn't do absolutely anything flashing related? Just give it back to the shop and get a new one if it's faulty, before it's too late. Also, maybe the battery was faulty and died; have you tried with another battery?
Click to expand...
Click to collapse
Its my friend's phone. Not mine. So i really dunno what happened. Not yet try with other battery.
Easy fix.....send it back!
Assuming it has warranty.
Sent from my GT-I9100T
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
[EDIT] The phone is a Samsung Galaxy S2!
Cheers!!
Did your phone shut off during the install?
Phone model? When exactly did it shut off?
Sent from my GT-I9100 using Tapatalk 2
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
fagundes666 said:
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
Cheers!!
Click to expand...
Click to collapse
please provide your ROM kernel details before you attempted to flash revolt ROM.
Swyped from my Samsung Galaxy SII
jthatch12 said:
Did your phone shut off during the install?
Click to expand...
Click to collapse
Hi!
I forgot to mention...My phone is a Samsung Galaxy SII!
Like jthatch12 said, the phone just shut off during the install process.
I've already instaled a lot of roms downloaded here from xda and never got this kind of trouble! I read somewhere that a jig would take to download mode... Hope so!
Thank you all!
Cheers!
BlurrOVO said:
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
Click to expand...
Click to collapse
You pulled the usb cable out, while flashing a pit file?!
Why? Pit files are extremly dangerous.
I almost flashed a SGS1 pit file once..
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
s.d.oconnor said:
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Try that too... Several times! There's no sign of life...
fagundes666 said:
Try that too... Several times! There's no sign of life...
Click to expand...
Click to collapse
If you connect to your computer via USB are you getting any responce from your computer or phone at all. Also do you know anyone that has a galaxy s2, so you can see if it's the battery that has gone.
Sent from my HTC Desire using xda app-developers app
S II? Ok.
I9100/G/M/P/T? Your previous ROM? What are you did, more details. more.
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
epic118 said:
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
Click to expand...
Click to collapse
I didn't test any of those. The battery was ok.
I also did what s.d.oconnor said, I plug it into the computor but got no response.
The only response I got from the phone, is the warm up near the camera when I plugged it into charge for over an hour.
@bkjugg my previous rom was Wanan lite.
Thank you all.
Cheers!
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Hi!
I didn't try a jig because I don't have one. I've ordered one on ebay and I have to wait a few days now and see if it works. If not, I'll send the phone to samsung and try to get it repaired under warranty. If they say that it isn't covered by warranty, I'll try a guy on ebay uk. Just search for jtag s2.
Cheers!!
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Yep, same shiat. I can enter in download but can't in recovery + can't charge my phone ( has flashed 100500 ROMs, kernels, and all is ok, but not checked md5 - full wipe - bye bye until I return home. I hope I'll recover my phone.
Good luck OP.
I'm in the club for a brick SGS II, no smiles here too....
ChardC said:
I'm in the club for a brick SGS II, no smiles here too....
Click to expand...
Click to collapse
Since the jig didn't work, I sent my phone to samsung, under warranty! Now I just have to wait for better news...
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Timstah said:
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Click to expand...
Click to collapse
does it get hot if you plug it in the charger?
i bricked my SII last month trying to format internal sd in ext3, dont know what really happened, i rebooted and it just died, same symptoms as your phone.
i took it to a repair center under warranty and they replaced the motherboard for free.
Hi guys, my phone is flashed so I guess that will make this whole process painful...
But here is the story, I have omega version 12.1 I think (maybe 11 or 13) it has been on my phone for 1 + months now, so I am fairly certain it isn't anything to do with firmware. Phone wont turn on, wont go into download mode or anything. I have tried taking the battery out and leaving it out for 5 minutes, still nothing.
It was working fine before I went to bed, had 10 percent battery and was just on home screen when I put it on charge, not in app or anything. Then seems to be hard bricked after waking up, so happened sometime overnight.
I am not with a carrier, brought it locally outright at my local consumers electronics store (JB-HI-FI)
Since it is hard bricked to the point it wont turn on in download mode does that mean there is no way for them to know it is flashed unless they fix it (in which all is ok)?
Never done a warranty return, do I just take it into store and they send it off? How long will this take?
On top of all this I cut my old sim doown using a cutting template, and it appeared to slide in fine, but after trying to remove it today the push eject isn't working, and tips to get this out, doesn't appear to be enough room to grip it with tweesers.
Thanks.
So as we keep on saying in all posts, the next step u have to make is try with an usb jig.
U know what is that?
xopito_cc said:
So as we keep on saying in all posts, the next step u have to make is try with an usb jig.
U know what is that?
Click to expand...
Click to collapse
No, have never heard of one. Just talked to samsung live chat and they said to have a proper diagnostic to take it down to a service centre, would anyone recommend this, or try this jig thing first?
Nicholas68 said:
No, have never heard of one. Just talked to samsung live chat and they said to have a proper diagnostic to take it down to a service centre, would anyone recommend this, or try this jig thing first?
Click to expand...
Click to collapse
Since it's already harbricked, i'd say just turn it in and let Samsung fix it for you. It is under warranty, and last time i brought in my i9000 that I bricked, they just replaced the phone. the jig is ok only if you already know where to get one or how to make one, but if you have to go out of your way for it, just use the warranty.
Sent from my LG-LU6200 using xda premium
JiroPrinz8 said:
Since it's already harbricked, i'd say just turn it in and let Samsung fix it for you. It is under warranty, and last time i brought in my i9000 that I bricked, they just replaced the phone. the jig is ok only if you already know where to get one or how to make one, but if you have to go out of your way for it, just use the warranty.
Sent from my LG-LU6200 using xda premium
Click to expand...
Click to collapse
Ok, Think that is best, can't really go without phone for 2-3 weeks while waiting for a JIG to arrive.
Just a few questions about the service centre, do you think they will ask me if I have flashed the phone? Cause I'm afraid they will think the brick was caused by that (could be) but probably unlikely since it died during the night a month after its latest flash.
If they do get it working will they go in and check the flash counter? Then what happens?
And lastly, if they ask me if I have flashed it should I lie and say no?
Thanks for the help.
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
priyana said:
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Nope brisbane here, thanks for the offer though. What would the chances be of a JIG fixing it though, cause I have a feeling the mainboard has died. Kinda wish I didn't turn off the red LED charging light, apparently some others who's phones hardbricked the light still turned on showing some sign of life.
Any suggestions on sorting out the micro sim card issue now, assume I have to get it our before taking it to service centre, or just leave it in for them to fix?
priyana said:
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Does the jig work on s3? I have an old one from s2 and if I'm not wrong is not working on s3...
Sent from my GT-I9300 using Tapatalk 2
ceo.mtcl said:
Does the jig work on s3? I have an old one from s2 and if I'm not wrong is not working on s3...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
-it will force the S3 in download mode
BUT
-it will not reset the flash counter like with S2
Got a little bit of good news, this might help other people out with jammed sim cards, NO damage and worked like a treat.
In the top of the sim card holder down the bottom left there is a little circle around one mill wide, got a sharp thumbtack and pushed it gentelly into the sim card, the just applied a little pressure and the sim card started to slide up, was very easy, had a great grip on the sim cad and no damage done trying to grab it with needle nose pliers like I read elsewhere, now to get the phone replaced or unbricked.
Thinking about it more I think it is a hardware fault, cause I had flashed the correct version of omega for international S3, I havn't had any wrong signs like freezing or crashing, been working flawlessly for over a month, then out of the blue completely dead. So I think I will just go into the service centre and tell them I suspect the motherboard has died, or the charger port (didn't charge over night), dont have a spare battery to test with though).
http://lifehacker.com/5940308/save-a-bricked-phone-using-paper-clips-and-pencil-graphite
Just a post tyat i found today..not sure if it ll work or not.
Sent from my GT-I9300 using xda app-developers app
That video is pretty cool, don't have an old connector to try it, but seeing as my phone didn't hard brick from a flash going wrong while flashing or wrong firmware or anything I have a feeling a JIG or similar wont work. Would try it if I had the connector though.
How often do batterys and charger ports fail, cause that could be another reason I guess.
Nicholas68 said:
Ok, Think that is best, can't really go without phone for 2-3 weeks while waiting for a JIG to arrive.
Just a few questions about the service centre, do you think they will ask me if I have flashed the phone? Cause I'm afraid they will think the brick was caused by that (could be) but probably unlikely since it died during the night a month after its latest flash.
If they do get it working will they go in and check the flash counter? Then what happens?
And lastly, if they ask me if I have flashed it should I lie and say no?
Thanks for the help.
Click to expand...
Click to collapse
Exactly. There were no problems with the flashing part, i think ypu have a hardware issue.
They didn't ask me anything really, just asked what happened prior to the phone dying.
But i was ready to lie my ass off.. lol!
Dont say anything about flashing. They wont even bother trying to flash the phone if they dont get it into download mode.
Sent from my LG-LU6200 using xda premium
JiroPrinz8 said:
Exactly. There were no problems with the flashing part, i think ypu have a hardware issue.
They didn't ask me anything really, just asked what happened prior to the phone dying.
But i was ready to lie my ass off.. lol!
Dont say anything about flashing. They wont even bother trying to flash the phone if they dont get it into download mode.
Sent from my LG-LU6200 using xda premium
Click to expand...
Click to collapse
Ok, thanks for the info, I've tried everything besides a JIG to try get it into a download mode, so I doubt they will get it into download mode, Ive seen a couple of other cases where the S3 has had a mainboard issue, only other thing is in the last week I have been using the wall charger where as I normally use the computer and usb, so not sure if this could link to it though, might have got a power surge, but had no storms in months so unlikely and the fuse box is modern with pretty good protection. Ill just go in and tell them it was working one night, and dead when I woke up the next morning, which is the truth. And if they ask if its flashed, ill miss understand them and say, not the screen wasn't flashing/flickering when it died, I was asleep
Reality is though if they get the phone to a restored point to where they can see the flash counter, then I no longer need their help to fix it.
One more question. At the service centres do they try fix it while I'm there, or do they tell s to come back in a few hours, or do they ring a few days later. And if they can't get it in download mode do they normally give you a replacement there? Or do they ship it off to get parts replaced and then ship it back taking weeks/months?
Thanks
I'd give the jig a chance. Just imho.
Btw it is very likely that the jig would arrive in, like, 24-48 hours if you choose the right seller, while other users already told you it's probably gonna take more then a few days (probably from 2 weeks to a month) for samsung to "close the ticket". In my experience only with apple you'd be up and running in less then a week.
Nicholas68 said:
One more question. At the service centres do they try fix it while I'm there, or do they tell s to come back in a few hours, or do they ring a few days later. And if they can't get it in download mode do they normally give you a replacement there? Or do they ship it off to get parts replaced and then ship it back taking weeks/months?
Thanks
Click to expand...
Click to collapse
I'm sure they will ask you to come back in a few days or even weeks. Don't think they will replace new unit for you. They will just replace the faulty part.
Sent from my GT-I9300 using xda app-developers app
I have the same issue so thought i would post here rather than starting a new thread.
Here's the story for mine. Working fine on current rom for about a month no issues at all. Today battery got to about 9% then switched off and i haven't been able to get it to turn on again, no download mode,no recovery, no charging led nothing at all.
I had to change my screen a couple of days ago, has been working fine with the broken screen for months, have i now voided my warranty?
A lot of faulty s3 i think... My s3 suddenly died last night. Battery is around 90+. Check the phone and it's not responding. Power button doesn't work. Doesn't even go to download mode or recovery mode. I'm running on stock ICS with root only. Sad part is I don't have any access for a jig right now. So can't test it. Bought this phone in SG and I'm in the Philippines right now. Warranty is good for SG only. Dec would be my next trip back to SG. By then no S3 as of now. For a phone I'm getting depressed LOL!
over the air jellybean brick my phone unrooted unflashed phone
BEWARE EVERYONE!! when updating to jellybean some do go very wrong! not all! but some do!! and it will brick your phone!! i updated over the air.. and for a few days. my phone kept on freezing! and locking up! one night i went to bed woke up and the phone was stuck on the boot screen! i thought thats weird took battery out, put back in, as ya do.. nothing took sim out and back in nothing... so only option was to reapair it through kies. put serial in and model number in it found the sortware. i downloaded it. told me to put phone in recovery mode.. so i did,kies said it was gonna install it to my phone.. but everytime it tryed to install it kept on saying it couldnt find my phone.. i tryed this all day long used different usb ports. different computers. to know avail, so my only option was to take it in for repair.. so i took it back to phones 4 u! they sent it away, i waited over 2 weeks! which was undiscrible it was like i lost my right arm with no phone! as you can imagine.. than the repair center turned round and said that the phone has been rooted! which it hadnt!! and they said this in order to brake the terms and conditions of my warentee so phones 4 u can get out of giving me a new handset. so they all save money!! i wouldnt do that to a 500 pound phone!! the phone does everything you could want from a phone! im launching a full investigation into this matter.. and have writen a formall complaint to phones 4 u headoffice, and will be contacting trading standards, ofcom, watchdog, and the ombudsman, and plaster it on all the forums ,social networking sights i can think of, to give them as much bad press as possible!! untill my problem is resolved and i will restore there name and clear it once they have done the right thing by me
I am afraid I can also report a bricked S3 here.
Rooted two weeks ago, but did not yet install a rom. Didn't Triangleaway yet aswell.
Same problem as described, I was browsing the net, and suddenly, screen went black (off). Could not get it powered on anymore. (nor in download/recovery mode)
So i brought it to the local telecom service center of my office, they could tell me the battery was fine and the buttons were working but they never saw one in this state.
So they are sending it to a samsung repair company.
This was two days ago, heard nothing yet, but I am very curious if I will get repaired or if I need to pay because of the rooting.
Will post the result if I know more.
Does anyone know if this problem also happens to people who did not root?
I have been running Siyah 1.7rc1 dual booting Omega v30 as primary and AOKP milestone 1 as secondary. I also have the 4.2 camera and keyboard mods installed. The phone has been working fine until last night.
Last night the phone was fully charged. This morning the phone was off and wouldn't turn on when I pressed the power button. Hoping it was just a depleted battery, I put the phone on the charger for a couple of hours. However, it still won't turn on. I can't get to either recovery mode or download mode with the vol_up+home+power or the vol_down+home+power.
There is no reaction from the phone to any combination of buttons. I have removed the battery a few times with the same results.
Does anyone have any ideas? I might try and see if Samsung service can fix this but wanted to know if there was any advise from XDA.
Well if you do want to go to samsung service """ you have a freaking rooted phone bro"""""",,,BTW your phone is dead.
As repair is chargeable i would first try a new battery or borrow one and a USB jig to boot to recovery mode .
jje
*sob*
Mine has gone exactly the same way.
Had it on charge. Took it off charge and checked emails then left it on my desk. Came back 30 minutes later, picked it up and phone was completely dead.
No light when plugged into a charger, phone won't power on.
Plugged it into a computer, no luck.
Different chargers, different cables, no luck.
Tried a USB jig, no luck.
I've NOT tried a new battery yet, that's next on my list. I suspect this won't make any difference either.
I suggest you send it to samsung bro.
happened to my phone too.
They won't find out you rooted/have custom ROM etc, cause this is caused by hardware failure. They'll need to replace it to get it to boot, so they can't tell if you rooted or not.
LemonPlusTea said:
I suggest you send it to samsung bro.
happened to my phone too.
They won't find out you rooted/have custom ROM etc, cause this is caused by hardware failure. They'll need to replace it to get it to boot, so they can't tell if you rooted or not.
Click to expand...
Click to collapse
take it back to the shop first, if you havent had it too long them may just swap it out. If not then they will send it back for you and should lend you candybar phone to use if you leave them a deposit (depends on the shop though).
Sammy wont even both to check if its been rooted, they will just replace it.
Thanks both. I'm going to send it straight to Samsung as soon as I've found proof of warranty. Hopefully it won't take too long to sort out.
zaphy42 said:
Thanks both. I'm going to send it straight to Samsung as soon as I've found proof of warranty. Hopefully it won't take too long to sort out.
Click to expand...
Click to collapse
Like i said its a paid for repair .
Totally dead mobo that requires change you will probably get away with warranty .
jje
I did try using a friend's battery. No go. I saw another thread on XDA where a bunch of people seem to have hit the same problem in the last week. I am wondering if it is some time-triggerred bug?
randombrick said:
I did try using a friend's battery. No go. I saw another thread on XDA where a bunch of people seem to have hit the same problem in the last week. I am wondering if it is some time-triggerred bug?
Click to expand...
Click to collapse
I've just got round to trying a friends battery too. Likewise, no go.
I think it's probably more likely a design flaw on Samsungs part.
I wonder if they've produced a different revision of the S3 circuit board to fix it? I've heard on other threads that Samsung just replace the system board when it's sent back for warranty repair...
Well there certainly has been quite a lot of them over the last 4 weeks or so. Probably some sub-standard motherboards found their way into the production line every now and then (given the number of units produced), or a design flaw as noted above. It's going to be a reasonably expensive exercise for Samsung if they end up having to replace a lot of them though...
I just hope that the new one they put in my phone isn't going to commit suicide again in 4 months time
Sent from my GT-I9300 using xda premium
I have the exact problem.
But it was my fault in this case. Flashed an "unmatched" md5 file of WanamLite.
It booted up normally. Then i proceeded installing TiBu & restore apps. After 10mins, i came back with a dead phone.
After some googling & advice from phone shops, there's a possibility that the motherboard may be fried.
I sent to Samsung Service Centre, and within 2 working days, my S3 is alive.
Sent from my GT-I9300
Hi, Hope i am in the correct forum,
i am using galaxy s2 i9100 and was running stock ICS rom+kernal, singapore ROM. No flashing was done, other than official OTA updates
I have encountered a rather strange problem. My phone was acting a bit strange before i did anything (Fast battery drains) , so i did a factory reset as recommended by samsung.
It seemed to solved the issue, then i decided to enable force GPU in developer options, and then my phone started acting up. It would not want to shut down (the lights of the keypad wont go off), and now it wont want to turn on
I have tried reinserting battery, letting it charge, but all i got was the camera part of the phone getting hot. Nothing else, no display, nothing
I cant even enter recovery/download mode (accessed by reinsert battery + Hold Vol buttons+Home + power button right?)
What can i do to resolve this? Strangely enough, I am running totally stock ROM and Kernal. I have no knowledge on how to use odin and all. I have no more warranty, so i can only ask for your help. Any help would be really appreciated
arn.yong said:
Hi, Hope i am in the correct forum,
i am using galaxy s2 i9100 and was running stock ICS rom+kernal, singapore ROM. No flashing was done, other than official OTA updates
I have encountered a rather strange problem. My phone was acting a bit strange before i did anything (Fast battery drains) , so i did a factory reset as recommended by samsung.
It seemed to solved the issue, then i decided to enable force GPU in developer options, and then my phone started acting up. It would not want to shut down (the lights of the keypad wont go off), and now it wont want to turn on
I have tried reinserting battery, letting it charge, but all i got was the camera part of the phone getting hot. Nothing else, no display, nothing
I cant even enter recovery/download mode (accessed by reinsert battery + Hold Vol buttons+Home + power button right?)
What can i do to resolve this? Strangely enough, I am running totally stock ROM and Kernal. I have no knowledge on how to use odin and all. I have no more warranty, so i can only ask for your help. Any help would be really appreciated
Click to expand...
Click to collapse
which Stock ICS rom u ver into was it 4.0.4?
Have you tried with a different battery? Maybe your battery is damaged.
Usb jig▶jtag▶motherboard.
Hope its the 1st one.
{go back to your iphone since you are an android noob}
Sun90 said:
which Stock ICS rom u ver into was it 4.0.4?
Click to expand...
Click to collapse
Thanks for the reply
Yes, I was on Stock ICS 4.0.4, updated somewhere in november last year
agonn said:
Have you tried with a different battery? Maybe your battery is damaged.
Click to expand...
Click to collapse
Yes, I have tried with the original samsung battery and the samsung extended battery
theunderling said:
Usb jig▶jtag▶motherboard.
Hope its the 1st one.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
Where can i find a USB jig? Might be worth a shot
And personally i hate all apple products, and i never use their products before
I have been using android for nearly 2 years, except that i never dared to delve into root/flash as i did not want to void warranties.
There's a thread in General where people offer to lend their jigs to other people. Check; there might be someone near you who can help. Alternatively, search eBay (and probably elsewhere online) "Samsung Galaxy S2 jig". Costs a few dollars.
Re: the Apple thing, it's his sig. He didn't post "go back to your iPhone since you are an Android n00b".
arn.yong said:
Where can i find a USB jig? Might be worth a shot
And personally i hate all apple products, and i never use their products before
I have been using android for nearly 2 years, except that i never dared to delve into root/flash as i did not want to void warranties.
Click to expand...
Click to collapse
MistahBungle said:
There's a thread in General where people offer to lend their jigs to other people. Check; there might be someone near you who can help. Alternatively, search eBay (and probably elsewhere online) "Samsung Galaxy S2 jig". Costs a few dollars.
Re: the Apple thing, it's his sig. He didn't post "go back to your iPhone since you are an Android n00b".
Click to expand...
Click to collapse
Oh i see, i didnt know it was his sig...oops
Ok, I'll see if i can find/get my hands on a jig somewhere around...Just hoping to bring this expensive brick back to life....somehow
Actually, now that I look at it. I'm not sure it is his sig, per se. It seems to be a standard line he ads to his posts. Perhaps TheUnderling can clarify ?
Good luck. If the jig is no go, given your warranty isn't good, look for JTAG repairers. Do a Google search, or look here, or ask local mobile repair shops. If it ends up not being JTAG'able, as TheUnderling mentioned, you'll need a motherboard replacement. If you get to that point, you can either source one from a 'donor' phone (broken screen or whatever; search eBay), or you can pay Samsung/authorised repairer to replace it.
arn.yong said:
Oh i see, i didnt know it was his sig...oops
Ok, I'll see if i can find/get my hands on a jig somewhere around...Just hoping to bring this expensive brick back to life....somehow
Click to expand...
Click to collapse
Hey T, I told you it was my new sig.
I may have to remove it as its getting too much attention
{go back to your iphone since you are an android noob}
Looks like you've caught a few already
theunderling said:
Hey T, I told you it was my new sig.
I may have to remove it as its getting too much attention
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse