Related
Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. On some devices, a yellow triangle or other sort of visual warning is also displayed during boot if you are running a custom firmware. TriangleAway was built to disable the triangle (if a visual warning is present) and reset the custom ROM flash counter to 0. This app requires root !
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works. Note that some newer device like the S4 do not show you the flash counter anymore - but it is still there.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to Reset flash counter. Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select Reset flash counter. The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE.
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you really mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices like the SGS4/SGS3/SGNote2/SGNote8/SGNote10.1 etc, the "system modified" status can only be reset on some firmwares - they must be stock firmwares!
FAQ
- Triangle Away shows a negative counter ?
If you have a very large flash count (over 127) this is known to happen. Please confirm in download mode that you actually have that large a flash count before resetting the counter.
- After using Triangle Away I get no bootscreen at all or an error message on screen ?
Try flashing the attached "param.tar" as PDA in ODIN (no repartition!), that may clear up the issue. Samsung Galaxy S II GT-I9100 ONLY
- What about future updates and devices ?
Please read this article I wrote about this: http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
- On my SGS4/SGS3/Note2/etc, Download Mode says my System is modified, and Triangle Away does not reset it
Triangle Away attempt to reset this status and block it from coming back, but it depends on the firmware. It does work on some (not all) stock firmwares. Resetting this value often doesn't work on custom firmwares! See the post below this one for more information.
- On the SGS4/SGS3/Note2/etc, System->Settings->About device->Status still shows "Modified"
This is outside the scope of Triangle Away. The "system" status is not even always resettable in the bootloader. If you are going for warranty, you need to also reflash a full stock firmware and wipe your device. If they boot up your device and find root apps, you're not going to get any warranty anyway. If you do such a full stock reflash and wipe, the "Modified" value will go away. The workaround option in TriangleAway may help you temporarily change this value. See the post below this one for more information.
- My counter always stays at 1
Some devices/bootloaders set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode, and make sure you are running a stock Samsung kernel and recovery.
Supported devices
Samsung Galaxy S2 GT-I9100 **
Samsung Galaxy S2 SPH-D710 Epic 4G Touch **
Samsung Galaxy S2 Korea SHW-M250K/L/S **
Samsung Galaxy S3 GT-I9300 **
Samsung Galaxy S3 GT-I9300T **
Samsung Galaxy S3 AT&T
Samsung Galaxy S3 Sprint
Samsung Galaxy S3 T-Mobile
Samsung Galaxy S3 Verizon UNLOCK BOOTLOADER
Samsung Galaxy S3 Canada
Samsung Galaxy S3 US Cellular
Samsung Galaxy S3 MetroPCS
Samsung Galaxy S3 Cricket
Samsung Galaxy S3 C-Spire
Samsung Galaxy S3 GT-I9305 LTE **
Samsung Galaxy S3 GT-I9305T LTE **
Samsung Galaxy S3 GT-I9305N LTE **
Samsung Galaxy S3 Korea SHV-E210K/L/S ** DISABLE DUE TO ISSUES
Samsung Galaxy S3 Korea SHW-M440S **
Samsung Galaxy S4 International GT-I9505 **
Samsung Galaxy S4 AT&T SGH-I337 UNLOCK BOOTLOADER
Samsung Galaxy S4 Verizon SCH-I545 UNLOCK BOOTLOADER
Samsung Galaxy S4 T-Mobile SGH-M919
Samsung Galaxy S4 Sprint SPH-L720
Samsung Galaxy S4 US Cellular SCH-R970
Samsung Galaxy S4 Canada SGH-I337M
Samsung Galaxy Note GT-N7000 **
Samsung Galaxy Note GT-I9220 **
Samsung Galaxy Note 2 GT-N7100/T **
Samsung Galaxy Note 2 GT-N7102 **
Samsung Galaxy Note 2 GT-N7105/T LTE **
Samsung Galaxy Note 2 SPH-L900 Sprint **
Samsung Galaxy Note 2 SGH-T889 T-Mobile **
Samsung Galaxy Note 2 SGH-T889V Canada **
Samsung Galaxy Note 2 SGH-R950 US Cellular **
Samsung Galaxy Note 2 AT&T/Canada SGH-I317/M **
Samsung Galaxy Note 2 SCH-I605 Verizon ** UNLOCK BOOTLOADER
Samsung Galaxy Note 2 Korea SHV-E250K/L/S **
Samsung Galaxy Note 3 International SM-N9005 4.4+
Samsung Galaxy Note 3 SM-N900T T-Mobile 4.4+ (Untested)
Samsung Galaxy Note 3 SM-N900P Sprint4.4+ (Untested)
Samsung Galaxy Note 3 SM-N900W8 Canadia 4.4+ (Untested)
Samsung Galaxy Note 3 SM-N900S/2/6/8/9 Asia 4.4+ (Untested)
Samsung Galaxy Note 8.0" GT-N5100 3G **
Samsung Galaxy Note 8.0" GT-N511x Wi-Fi **
Samsung Galaxy Note 8.0" GT-N5120 LTE **
Samsung Galaxy Note 10.1" GT-N8000 3G **
Samsung Galaxy Note 10.1" GT-N801x Wi-Fi **
Samsung Galaxy Note 10.1" GT-N8020 LTE **
Samsung Galaxy Note 10.1" SHW-M480S/K/W **
Samsung Galaxy Camera EK-GC100 **
Samsung Galaxy Tab 2 GT-P310x 7" 3G
Samsung Galaxy Tab 2 GT-P311x 7" Wi-Fi
Samsung Galaxy Tab 2 GT-P510x 10.1" 3G
Samsung Galaxy Tab 2 GT-P511x 10.1" Wi-Fi
Samsung Galaxy Ace 2 GT-I8160
Samsung Galaxy S Advance GT-I9070/P
Samsung Galaxy S3 Mini GT-I8190
Samsung Galaxy Grand Duos GT-I9082
Samsung Galaxy Ace Plus GT-S7500
Samsung Galaxy Ace IIx GT-S7560
Samsung Galaxy S Duos GT-S7562
Samsung Galaxy Premier GT-I9260
Various Qualcomm-based Samsung devices should now be supported as well, but I don't know which ones - please let me know!
Suspected is a large range of Qualcomm based Note and S2 variants.
** Various related models are supported depending on firmware, but only the exact model numbers listed are supported regardless of firmware version.
Whether or not Triangle Away works depends largely on your kernel. Flashing a different kernel may make it work if it previously didn't.
Download
Download from Google Play
The Google Play download is not free - it costs about a beer (thanks!). The download listed below is 100% the exact same program, but free. I provide it for free because I believe this app should be available even to people who cannot pay on Google Play. If you are able to purchase on Play, please consider that I have spent a great many hours on this, and the latest version also uses server resources I have to pay for.
REDISTRIBUTION IS NOT ALLOWED
( 1.00: 634; 1.10: 12795; 1.25: 59699; 1.50: 2891; 1.51: 45740; 1.70: 30839; 1.80: 13997; 1.90: 26020; 2.00: 10141; 2.05: 2421; 2.06: 755; 2.10: 17703; 2.15: 4780; 2.20: 4219; 2.25: 2861; 2.26: 11340; 2.30: 5132; 2.35: 676; 2.36: 16139; 2.37: 77595; 2.40: 12019; 2.45: 2725; 2.50: 7233; 2.55: 19784; 2.60: 54862; 2.65: 2957; 2.70: 6734; 2.75: 41790; 2.80: 2314; 2.85: 5092; 2.90: 128863; 2.95: 4595; 2.99: 27515; 3.00: 63085; 3.01: 78579; 3.05: 35309; 3.10: 189298; 3.25: 5562)
System Modified Status
The latest Samsung devices store "system modified ?" flags next to the "flash counter" and "current binary official ?" that Triangle Away traditionally resets.
It actually has this "system modified ?" flag twice. Once in the bootloader, once in Android itself. When resetting the flash counter, Triangle Away does attempt to reset the one stored in the bootloader (that you can see from Download mode), and disable it from being updated. However, whether or not this works is completely dependent on your device model and firmware version.
The flag in Android itself can be seen under Settings --> About Device --> Status --> Device Status. This one also affects whether or not the firmware will allow you to download and flash OTA updates, and may affect DRM apps and the allshare cast dongle.
Version 2.95 of Triangle Away introduced a "periodic system modified reset" option (enabled by default) that may help keep the bootloader system modified status as official. It has no effect on the system modified status under Settings and thus does not help with OTAs.
Version 2.50 of Triangle Away introduced a "allow tracker to run" option that can re-enable syscope if it was disabled by resetting the flash counter. After doing this and rebooting, in some cases this reverts to status under Settings to normal. However, in my personal experience this only works temporarily, and after a number of hours the status will revert to modified in both Settings as well as the bootloader, after which you will have to use Triangle Away to reset the status. This behavior is dependent on firmware, for some users this option works reliably. Alternatively, you can use the next option, which is more reliable, but less convenient.
Version 2.45 of Triangle Away introduced a "system modified workaround" option that tries to counter the flag in Android under Settings. This option is dependent on a fair number of factors:
- You must be running a stock Samsung ROM
- The SysScope package must be intact (if you removed it, it will likely not work)
- You must be using SuperSU as your root rights management app (Superuser is not supported)
- You must be using either the Play version of Triangle Away or have SuperSU Pro installed
A side-effect of this workaround is that root will be disabled for about five minutes after boot (yeah...). During that time, Triangle Away will display a notification. All your apps that launch at boot and do something that requires root will not be able to gain root access during this time. A well-coded root app should not care about this much, but unfortunately not all apps are coded that defensively, and app crashes may occur. When root access is restored, Triangle Away will re-launch the apps that are set to launch at boot and have been granted access in SuperSU, so these root apps may still initialize themselves properly.
Personally, I find this too annoying to use constantly, but due to being a developer, I reboot a lot. One way to use it would be to use the standard reset flash counter method that resets the bootloader value (and if you're lucky will keep the system status in the bootloader as "official" as well), and once in a while use the workaround patch when you want to check for OTAs and such only.
There are also some caveats:
- This workaround is incompatible with the reset function used when you reset the flash counter. As such, the "system modified" status flag in the bootloader may start updating again (resetting the counter itself will still work, though) if you enable the workaround. It will reflect the status you can see in Android. If you disable the workaround again, you are advised to reset the flash counter again afterwards.
- If your system is modified by other root tools, the "modified" status may still be triggered, regardless of this workaround
- I wanted to implement all this in a much cleaner way, but due to a bug in Samsung's modifications of the package manager, that method would often result in corrupted data and the inability to modify/(un)install any apps after the corruption occurs. Note that this corruption may still occur "naturally", and Triangle Away will inform of you of this problem if it occurs during enabling of the workaround. Unfortunately, there is no known solution to this issue other than wiping all your data (factory reset).
- I fully expect Samsung to prevent this patch from working in the near future, so use it while it's hot.
Note to developers:
In case your app uses a BOOT_COMPLETED receiver and has been granted access in SuperSU, it will receive a second BOOT_COMPLETED intent from Triangle Away once root access has been restored. The second intent will have an extra present named "eu.chainfire.triangleaway.BOOT_COMPLETED"
Technical details (Updated 13.02.2012) (outdated)
The flash counter and triangle state had to be stored somewhere. Everybody knew that. Guesses have been made in the past where it could be, and I have personally compared the raw flash disk contents between different amount of custom flashes in the past, unable to find any differences. You can dump and compare the entire /dev/block/mmcblk0 and you won't find a difference (you'll find a few unallocated and unused gaps, though).
The solution comes with the new kernel uses by ICS builds. The flash disk actually has two hidden boot partitions, /dev/block/mmcblk0boot0 and /dev/block/mmcblk0boot1 . The MMC driver in the kernels used for Gingerbread did not present these partitions in the past, the MMC driver in the ICS kernel does.
Teamhacksung members said something about having found the location, so I retried locating the position on ICS. Until recently I had always ran the KH4 Gingerbread build because until the LPB ICS build USB host was not properly supported on ICS, and I need that for other apps I make. It's really easy to find now on ICS. Dump and compare the partitions and you'll have found them in no time. I've already done it, so here is the information.
Structure /dev/block/mmcblk0boot0 @ 0x00020000:
0x00020000 header magic: 32bit - 0x12340011
0x00020004 flash count: 16bit
0x00020006 future: 16bit - 0x0000
0x00020008 type: 16bit - 0x0000 unknown, 0x0001 custom (triangle), 0x0002 Samsung Official
0x0002000A name: max 16 chars
0x0002001A end: 16bit - 0x0000
The boot partitions are presented as readonly by default, but allowing modification is a simple matter of executing the following before writing the data:
echo 0 > /sys/block/mmcblk0boot0/force_ro
That should give you all the information you need to replicate this. A number of bytes trailing this structure also change between flashes and appear to be checksum related.
As stated above, this isn't easily doable on Gingerbread. That is also why this currently does not work on the SGNote. When ICS is released for the SGNote it'll probably be compatible out of the box, or trivial to make it compatible. I say on Gingerbread it is not easily doable, but it is not impossible. If you put a lot of effort into it, you can probably talk to the MMC device directly and modify these partitions, I personally don't feel it is worth the effort for Gingerbread, as (at the time of this writing) official ICS firmwares should be available for both the SGS2 as well as the SGNote very shortly.
Update 16.02.2012: Users have confirmed TriangleAway works on the I9220 SGNote ICS leak !
Update 13.05.2012: TriangleAway does *not* work on the latest official SGNote ICS firmwares. There will be a fixed version soon, but it has to wait for my Note to return from repairs, else I cannot test it
Update 04.06.2012: v1.50 should work with the I9220 and N7000 SGNote's again
--- reserved ---
Changelogs
15.01.2014 - v3.26
- Fixed: on some devices nothing happened when you pressed "reset flash counter". Oops
13.01.2014 - v3.25
- Updated support for the SGS4 Qualcomm family: Android 4.4.2
- Added support for the Note3 Qualcomm family on Android 4.4.2 (only)
--- Note3 QC INTL GT-N9005
--- Note3 QC T-Mobile SM-N900T (untested)
--- Note3 QC Sprint SM-N900P (untested)
--- Note3 QC Canadia SM-N900W8 (untested)
--- Note3 QC Asia SM-N900S/2/6/8/9 (untested)
04.10.2013 - v3.10
- Added "system" state display, if available on device
- Added Note3 device details, sadly no reset possible
13.09.2013 - v3.05
- Added "not using SuperSU" warning
- Fixed compatibility with newest I9505 ROMs (no Knox Warrenty reset!)
- Possible compatibility fix for I9295 (let me know)
29.07.2013 - v3.01
- Fixed incompatibility with latest SuperSU
22.06.2013 - v3.00
- Fixed bug in system official reset (bootloader) for S3/Note2
07.06.2013 - v2.99
- Fix crash issue
06.06.2013 - v2.98
- Adjustments to reset and background su, may fix enable tracker issue
- Adjustments to S4 family of devices reset
- Support for:
--- Samsung Galaxy S4 AT&T SGH-I337
--- Samsung Galaxy S4 Verizon SCH-I545
05.06.2013 - v2.95
- Restructured detect and reset code
- Fixed possible crash-at-launch
- Improved "system modified" patch
- Added periodic system modified reset service
- Added option to choose normal or download mode reboot in special boot mode
- New reset method for Qualcomm-based S4 family of devices
- Support for:
--- Samsung Galaxy Note 8.0 3G/Wi-Fi/LTE GT-N5100/10/20
--- Samsung Galaxy S4 International GT-I9505
--- Samsung Galaxy S4 T-Mobile SGH-M919
--- Samsung Galaxy S4 Sprint SPH-L720
--- Samsung Galaxy S4 US Cellular SCH-R970
--- Samsung Galaxy S4 Canadia SGH-I337M
21.03.2013 - v2.90
- Support for:
--- Samsung Galaxy Ace Plus GT-S7500
--- Samsung Galaxy Ace IIx GT-S7560
--- Samsung Galaxy S Duos GT-S7562
--- Samsung Galaxy S2 Korea SHW-M250K/L/S
--- Samsung Galaxy Premier GT-I9260
18.03.2013 - v2.85
- improved dump file
- Support for:
--- Samsung Galaxy Grand Duos GT-I9082
17.03.2013 - v2.80
- Added feature to create a helpful dump file
23.02.2013 - v2.75
- Updated SGS3 I9300 kernel with SDS patch
20.02.2013 - v2.70
- Support for:
--- Samsung Galaxy S3 Mini GT-I8190
--- Samsung Galaxy S3 MetroPCS
--- Samsung Galaxy S3 Cricket
--- Samsung Galaxy S3 C-Spire
19.02.2013 - v2.65
- Support for:
--- Samsung Galaxy Ace 2 GT-I8160
--- Samsung Galaxy S Advance GT-I9070/P
20.01.2013 - v2.60
- Support for:
--- Samsung Galaxy Note 2 SGH-T889V Canada
10.01.2013 - v2.55
- Support for:
--- Samsung Galaxy S2 SPH-D710 Epic 4G Touch
07.01.2013 - v2.50
- Added option to re-enable tracker after counter reset disabled it, works for some to restore system "normal" status temporarily(!)
- Fixed issue with the modified system status workaround, that root would never come back. If you're suffering from this problem, try keeping your phone fully on for 10 minutes or more, then root will return. Run Triangle Away again afterwards.
06.01.2013 - v2.45
- Implemented modified system status *workaround* (requires SuperSU)
- Support for:
--- Samsung Galaxy Camera EK-GC100
--- Samsung Galaxy Note 2 LTE GT-N7100T and GT-N7105T
01.01.2013 - v2.40
- Support for:
--- Samsung Galaxy Note 2 Verizon SCH-I605 (unlocked bootloader only !)
17.11.2012 - v2.37
- Disable E210* support due to touchscreen issues. Bad kernel source ?
08.11.2012 - v2.36
- Adjustment for AT&T Note 2
08.11.2012 - v2.35
- Support for:
--- Samsung Galaxy S3 Korea SHV-E210K/L/S
--- Samsung Galaxy S3 Korea SHW-M440S
--- Samsung Galaxy Note 2 Korea SHV-E250K/L/S
--- Samsung Galaxy Note 2 AT&T/Canada SGH-I317/M
05.11.2012 - v2.30
- Updated: Roboto font is now used in special boot mode
- Updated: Added (another) counter=1 warning in special boot mode
- Support for:
--- Samsung Galaxy Note 2 SGH-R950 US Cellular
31.10.2012 - v2.26
- Support for:
--- Samsung Galaxy S3 GT-I9305N LTE
30.10.2012 - v2.25
- Fixed: N8020 problem
- Improved: system status reset
- Support for:
--- Samsung Galaxy Note 10.1" SHW-M480S/K/W
28.10.2012 - v2.20
- Support for:
--- Samsung Galaxy Note 2 SGH-T889 T-Mobile
26.10.2012 - v2.15
- Support for:
--- Samsung Galaxy Note 2 SPH-L900 Sprint
16.10.2012 - v2.10
- Support for:
--- Samsung Galaxy Note 10.1 LTE GT-N8020
16.10.2012 - v2.06
- Support for:
--- Samsung Galaxy S3 LTE GT-I9305T
15.10.2012 - v2.05
- Support for:
--- Samsung Galaxy S3 LTE GT-I9305
--- Samsung Galaxy Note 2 LTE GT-N7100
--- Various Qualcomm-based Samsung devices
09.10.2012 - v2.00
- Support for:
--- Samsung Galaxy Note 2 GT-N7100
15.09.2012 - v1.95
- Support for:
--- Samsung Galaxy S3 SHV-E210K
--- Samsung Galaxy S3 SHV-E210S
24.08.2012 - v1.90
- Support for:
--- Samsung Galaxy Note GT-N8000 10.1" 3G **
--- Samsung Galaxy Note GT-N801x 10.1" Wi-Fi **
15.08.2012 - v1.80
- Support for:
--- Samsung Galaxy S3 US Cellular
--- Samsung Galaxy Tab 2 GT-P310x 7" 3G
--- Samsung Galaxy Tab 2 GT-P311x 7" Wi-Fi
--- Samsung Galaxy Tab 2 GT-P510x 10" 3G
--- Samsung Galaxy Tab 2 GT-P511x 10" Wi-Fi
18.07.2012 - v1.70
- Support for:
--- Samsung Galaxy S3 AT&T
--- Samsung Galaxy S3 Sprint
--- Samsung Galaxy S3 T-Mobile
--- Samsung Galaxy S3 Verizon
--- Samsung Galaxy S3 Canadia
06.06.2012 - v1.51
- Support for Galaxy S3 GT-I9300T
04.06.2012 - v1.50
- Fixes for Galaxy Note GT-N7000/GT-I9220
- Support for Galaxy S3 GT-I9300
02.03.2012 - v1.25
- Updated icon
- Updated some texts
- Added automatic reset at boot option
- Uploaded to Market
13.02.2012 - v1.10
- Updated technical details
- Device check removed, instead the app checks the header magic
- Internal structure changed
Interesting, waiting longer description.
Thanks,
Thanks Chainfire!
Is that BRICK as in permanent, or recoverable ?
Wow, if this works like you're saying, this is huge chainfire. Nice work!!
great progress mate
thanks you
cheers,
SX
Works on CM9 as well.
Thank you
Guess this will fix the ASEC issues.
I had 5 custom counts, now i have 0.
Great work.
Works great with Sakaschi MIUI v4.0.4
Great work, Thank You!
Works like a charm....thanks
Sent from my GT-I9100 using XDA App
Impressive! Is this a permanent fix if I go back to stock GB?
Sent from my GT-I9100 using XDA App
Also used with CM9 (latest build) and it worked like a charm!
Thanks Chainfire!
this can hard brick your device. unrecoverable!
it writes to your bootloader partition.
we've found it yesterday.
use it only if really necessary.
Sent from my Galaxy Nexus using XDA App
You my friend are epic! Nice one!
Sent from my GT-I9100 using xda premium
Very nice! Pardon the noob question but after running I no longer have the triangle, but now I have the Drunken Clam picture found on an old Andy Miui rom! Must have been lingering on my boot partition hidden until now. Any tools or instructions for getting back the default?
Sent from my GT-I9100 using Tapatalk
You could use the app sgs2-Bootlogo, you can find it in the market.
I just upgrade my SGS3 GT-I9300 to Jelly Bean 4.1.1 though Odin and everything went fine. The SGS3 reboot and back to work normally. I went to the System Settings/About Device and saw:
Adroid version: 4.1.1
Baseband version: I9300DXDLI5
Kernel version: 3.031-288630
[email protected] #1
SMP PREEMPT Mon Oct 8 12:58:21 KST 2012
Build number: JRO03C.I9300XXDLJ1
I also noticed that:
1. The Notification bar has an additional Blocking Mode button.
2. The System Settings page now has Account item which lists all accounts and I can sync them from here.
3. Gone is the System Setting/Sync page for these accounts.
3. New Blocking Mode switch on Settings page.
Other than those, how do I know that my SGS3 is running Jelly Bean? Does the boot screen look different? Does the Notification bar look different?
Thanks all
pentel
4.1.1 is jelly bean
You can use that new Android invention the google search engine to find the differences and extras JB brings .
jje
To know if your Jelly Bean upgraded works 100%:
1. Go to System Settings/About device
2. Click on the "Android version 4.1.1" bar
3. A Jelly Bean logo should open up.
4. Follow by a "Slide the beans" game where you can pick the bean and slide it off the screen one by one.
If the logo or the game is not showing up, there is something missing while upgrading.
GraveD ROM V3.0
Custom ROM only for the Galaxy Tab PRO 10.1 WiFi (SM-T520)!
What's this ROM about?
This is a cleaned and slimmed down stock ROM!
Why?
I like my ROM's clean, small and fast.
So what exactly did I do?
- Removed MOST Samsung/bloatware/KNOX/Google apps (~380 .apk's/files where deleted)
- De-Odexed.
- Rooted.
- ZipAligned.
- Greatly increases speed with NITROX (by k1ks)
- Added LibidinosoSC kernel v1.1 (by LibiSC)
- Added Dolphin Browser / Ad Blocker for Dolphin Browser.
- Added Nova Launcher.
- Added Apollo music player.
- Added AOSP Calculator.
- Added Xposed framework.
- Added WPS Office
Is this a ROM for me?
Depends, This is a very clean and slim ROM.
This is a great base to start from! It offers a plain and simple base.
A good and fast browser/Office and some standard apps (calculator, email client, camera)
Hugh speed improvements vs the stock ROM.
How to install? - Attention if you proceed your warranty is void.
Copy the zip to an SDCard.
Have a custom recovery, Like TWRP!
Make sure you do ADVANCED WIPE!!!
From the TWRP main menu go to "Wipe" > "Advanced Wipe" > here select everything except the external storage!
Flash it like you usually do.
Download
V3.0: SMT520_GraveD_V3.0 (637MB)
V2.1 (older): SMT520_GraveD_V2.1 (631MB)
V2.0 (older): SMT520_GraveD_V2 (641MB)
V1.0 (older): SMT520_GraveD_V1 (605MB)
Extra:
Since this is my first ROM that I share, ALL ideas/requests are welcome!
For an even better result, I've added the LibidinosoSC kernel v1.1!
With this new kernel your able to OC your CPU/GPU if you want.
Check out his topic for more info on the goodies you'll get from this.
Known issues:
The Google search widget should be removed, since it's not working (Google search is removed(can be re-downloaded trough the play store)).
For some reason the first few minutes you might get a "android.process.acore stopped" This will fix itself after a few minutes of stabilizing.
As @mupet0000 mentioned, When the Home button is pressed it waits a little to make sure you aren't going to double tap the home button to open S-Voice.
This causes slight lag, It's something that is present in all Samsung devices with S-Voice.
This is easily fixed by flashing the S-voice zip, going into it's settings and enabling then disabling open with double press of the home button.
Credits to:
@Chainfire for his SuperSU
@LibiSC For his Kernel
@k1ks for his NITROX SPARK EDITION
@mrwookie6379 Big thanks to him for helping me with setting up kitchen/theming/...
A big thanks to my donators:
@spton
@pat7
@crandy2
XDA:DevDB Information
GraveD SM-T520, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
.:GraveD:.
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: T520UEUANI1
Version Information
Status: No Longer Updated
Current Stable Version: 3.0
Stable Release Date: 2014-11-23
Created 2014-06-14
Last Updated 2016-04-13
Changelog
Changelog V3.0
- Base system updated from AND1 to ANI1
- Added LibidinosoSC kernel v1.1
- Switched from PurePerformances MOD to NITROX™_SPARK MOD
- Removed more unnecessary apk's and files
- Fixed multiple users
- Updated basic Gapps
- Updated Google Calender
- Updated WPS Office
- Updated Nova Launcher
- Updated SuperSU
Changelog V2.1
- Added Calender (To make the rom more usable / Google Calender)
- Removed more unnecessary apk's
- Fixed Contact sync
- Updated basic Gapps
- Updated WPS Office
- Updated SuperSU
Changelog V2.0
- Added CrossBreeder MOD
- Added tuning scripts from PurePerformances X
- Added Adrenaline Engine
- Added WPS Office (To make the rom more usable / WPS supports 44 languages)
- Added FULL language support (all languages are now availible!)
- Changed AOSP Email client to Stock version (AOSP gave troubles with exchange)
- Updated Dolphin Browser
- Updated Nova Launcher
- Updated SuperSU
Changelog V1.0
- Initial release
Stock APK's
Here are some stock apk's for any one who wants them on there Tab PRO 10.1 (SM-T520)
They are from the ANI1 version.
I have not tested them on any other device
How to install?
Copy the zip to your internal/external(sdcard) memory.
Have a custom recovery, Like TWRP!
Simply flash them.
Calculator: Download
Clock: Download
DownloadProvider: Download
DropBox: Download
Flipboard: Download
Launcher (Magazine UX, this will delete Nova Launcher): Download
Live Wallpaper / DayDream: Download
Music Player (This will delete Apollo): Download
Samsung Account: Download
S-Voice: Download
S-Finder: Download
WatchON: Download
Weather: Download
Stock Google app's:
Stock Google apps from the ANI1 firmware: Download
Unzip the ones you want and move to there corresponding folders. (/sytem/app or /system/priv-app)
Set permissions to RW-R--R-- (644) and reboot.
Or add them to the rom before flashing.
Kernels:
Copy the zip to your internal/external(sdcard) memory.
Have a custom recovery, Like TWRP.
Simply flash them.
Stock samsung kernel (ANI4): Download
LibidinosoSC kernel (v1.1): Download
Another 10.1 ROM enters the fray! AWESOME.
Knox issue
if i install this rom will i have knox waring at boot time? this will be the first time i will install non samsung rom and i havent installed knox so far Is it possible to give us original samsung email client as a seperate zip because aosp email is not working with exchange accounts.. thanks for your hard work.
benveq said:
if i install this rom will i have knox waring at boot time? this will be the first time i will install non samsung rom and i havent installed knox so far Is it possible to give us original samsung email client as a seperate zip because aosp email is not working with exchange accounts.. thanks for your hard work.
Click to expand...
Click to collapse
Hi,
You won't get the knox warning at boot, at least I don't
I'm already working on providing some of the apps separately, I'll add the email client to the list
.:GraveD:. said:
Hi,
You won't get the knox warning at boot, at least I don't
I'm already working on providing some of the apps separately, I'll add the email client to the list
Click to expand...
Click to collapse
thanks a lot buddy! be waiting for samsung email also. by the way the kernel u advise for us working good ?
benveq said:
thanks a lot buddy! be waiting for samsung email also. by the way the kernel u advise for us working good ?
Click to expand...
Click to collapse
Samsung email has been added to my third post
Whit the Cybertronic kernel you get better ram management, and some improvement in smoothness
Only oddity: live wallpapers don't work for some reason?
SomeGuyDude said:
Only oddity: live wallpapers don't work for some reason?
Click to expand...
Click to collapse
That's because that service is not included, I've added it to the third post, Live wallpaper picker,
Haven't tested it, but it should work
i'm using your rom with Cybertronic kernel, running a lot better then stock!
Thanks for the development. Weirdly, this thing doesn't install for me. It goes into Odin mode when I try to boot system after flashing it. I thought it might have been a bad flash, but after a retry I get the same result.
Any ideas?
Angelusz said:
Thanks for the development. Weirdly, this thing doesn't install for me. It goes into Odin mode when I try to boot system after flashing it. I thought it might have been a bad flash, but after a retry I get the same result.
Any ideas?
Click to expand...
Click to collapse
Hi,
Weird thats the first I here, put it can always happen
Try re-download the ROM it's possible it got corrupted during download.
Make sure you wipe everything, in TWRP go to advanced wipe and select everything (except external storage! )
Another possibility:
I've noticed it says Tab PRO 8.4 in you sig, this is a ROM for the tab PRO 10.1
.:GraveD:. said:
Another possibility:
I've noticed it says Tab PRO 8.4 in you sig, this is a ROM for the tab PRO 10.1
Click to expand...
Click to collapse
Really gotta figure out how to fix this DevDB issue:
.:GraveD:. said:
XDA: DevDB Information
GraveD SM-T520, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Click to expand...
Click to collapse
.:GraveD:. said:
Hi,
Weird thats the first I here, put it can always happen
Try re-download the ROM it's possible it got corrupted during download.
Make sure you wipe everything, in TWRP go to advanced wipe and select everything (except external storage! )
Another possibility:
I've noticed it says Tab PRO 8.4 in you sig, this is a ROM for the tab PRO 10.1
Click to expand...
Click to collapse
You sir, are absolutely right. I'm not sure what threw me off, but I am mistaken. Thanks for pointing that out.
I think I need to learn which apps I can safely remove myself. I'd like to create a ROM, but I wouldn't know where to start.
does this rom work on the 12.2?
title says T-520 but body says
GraveD SM-T520, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
thanks
maximus96 said:
does this rom work on the 12.2?
title says T-520 but body says
GraveD SM-T520, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
thanks
Click to expand...
Click to collapse
Hi,
No this will not work on the 12.2,
The "Samsung Galaxy Tab Pro 12.2, 10.1, 8.4" part is a error in the xda:devdb, it says that for all Tab PRO devices
arrrghhh said:
Really gotta figure out how to fix this DevDB issue:
Click to expand...
Click to collapse
.:GraveD:. said:
The "Samsung Galaxy Tab Pro 12.2, 10.1, 8.4" part is a error in the xda:devdb, it says that for all Tab PRO devices
Click to expand...
Click to collapse
I've sent a message to the moderators, who are forwarding it onto the admins... We'll get this fixed :good:
(I am intentionally not using DevDB for this reason...)
Does this rom restore MicroSD permission to the Pre Android 4.4 mess? Or if not is there one out that that does?
jtkirk86 said:
Does this rom restore MicroSD permission to the Pre Android 4.4 mess? Or if not is there one out that that does?
Click to expand...
Click to collapse
My BOX and VGB Emu app are able to write/modify files on my MicroSD card without probs, so this should work for all other apps as well
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What is AOSP ?AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
What is CodeAurora Forums ?Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
How to flash:
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Zip > Swipe, optional: flash GAPPS (before rebooting!) and SuperSU
-Reboot
Features
Pixel Theme/Bootanimation/Sounds/Launcher
integrated Xposed
CAF Chromium Browser
Night Light
integrated Substratum (Rootless)
Wakeblock support
Button Light settings
No major issues/bugs
Bootanimation a bit off
No off charging animation
...
Download
GAPPS SuperSU
Notes:
- just ignore E: Unknown Command errors in TWRP
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20170928: Complete new version based on LA.UM.5.8.r1-02800-8x98.0 with new features
20170604: Rebased on LA.UM.5.8.r1-01900, add some missing things like palm rejection, changes for OMS, add accept all files bluetooth option, some changes from Lineage
20170421: Rebased on Android 7.1.2_r6, added missing messaging app, added F2FS support, added init.d support, removed some previous additions,FFMPEG, Substratum support, ...
20161215: Android 7.1.1_r6, fixed Launcher3 FC, added SuperSu shortcut to settings
20161213: Added button backlight setting (Settings>Buttons), enabled storage manager (more about that), SystemUI tuner enabled per default, unknown sources and developer settings enabled per default, bluetooth disabled per default, Launcher3: removed searchbar/widget, SELinux Enforcing, a few other Things
20161206: merged android 7.1.1
20161129: fixed NTFS/ExFAT, fixed off charging mode
20161126: add browser, support google play webview, fixed camera, changed keylayout to menubutton:menu and doubletaphome:recent apps, increased volume levels
20161121: fixed camcorder, fixed home button wake
20161121: fixed bluetooth, mobile data, camera preview and softbutton lights , added missing soundeffects, Launcher3, touch disabled while using pen, a few other things
20161119: initial release
Screenshots
Credit: LineageOS Team and Maintainer, OmniROM, AOSP OMS, CodeAurora, abforce, bamless
Sources:
AOSP
My changed AOSP Sources and device sources
Kernel sources
XDA:DevDB Information
[ROM][SM-P605][7.1] The Android Open Source Project, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader and Modem
Based On: AOSP
Version Information
Status: No Longer Updated
Created 2016-11-19
Last Updated 2019-05-02
New Build
Changelog:
-fixed bluetooth, mobile data, camera preview and softbutton lights
-added missing soundeffects
-Launcher3
-touch disabled while using pen
-a few other things
Download
Great...going to try..
Is a dirty flash over your cyanogenmod possible??
New Build
Changelog:
-fixed Camcorder
-fixed home button wake
Download
slawoko said:
Great...going to try..
Is a dirty flash over your cyanogenmod possible??
Click to expand...
Click to collapse
I don't know. Maybe it will work, maybe not, but think, it probably will cause problems.
it doens´t . All the google apps are broken and the setting menu not available.
Going to flash clean and test ...
New Build
Changelog:
-add browser
-support google play webview
-fixed camera
-changed keylayout to menubutton:menu and doubletaphome:recent apps
-increased volume levels
Download
New build
Changelog:
-fixed NTFS/ExFAT
-fixed off charging mode
Download
davidmueller13 said:
New build
Changelog:
-fixed NTFS/ExFAT
-fixed off charging mode
Download
Click to expand...
Click to collapse
davidmueller13, please don't get me wrong: I do appreciate your work; in fact, I'm on one of your 5.1.1 ROMs. But I'd much rather have a fully working/stable Marshmallow, than an experimental/developmental Nougat on my P-605...
That's just silly.
7.1 should be better for this tablet because of the pen and no bloat.
Been waiting to try for a while. But I use the tablet for work. Working on getting another beater so I can flash this.
Thank you for continuing progress.
S.V.I said:
That's just silly.
7.1 should be better for this tablet because of the pen and no bloat.
Been waiting to try for a while. But I use the tablet for work. Working on getting another beater so I can flash this.
Thank you for continuing progress.
Click to expand...
Click to collapse
Silly, you say? Nougat has way more Google integration going on. Some of us don't like the direction Google is taking with android development...
The pen works just fine on any ROM, so I'm not sure what you mean...
And the bloat, well that's up to the dev to remove; or you can do it yourself later if rooted.
Hi folks
Awesome build - installed it in few minutes along with twrp and Gapps. Everything seems to work fine...
Except:
- could someone tell me how to update modem? My sim card is not recognized. (Not from issue though)
- is there a way to completely turn of buttons backlight? I do not really need light there.
Thank you very much!
EDIT: I found an instruction and will flash stock 5.1.1 and than will repeat the 7.1 flash.
Also magnetic cover works for me - locks/turns screen off and on. Coming from 4.4.2 - that's why sim card is not detected... Working on it.
Thanks,
EDIT2: I flashed with odin stock 5.1.1 (P605XXU1EOI5_P605BTUEOJ1_P605XXU1EOI5_HOME) and than rooted and flashed twrp 3.0.2.0.
Than I repeated all steps and flashed 7.1 + gapps + SU.
... SIM Card is NOT detected again... Which baseband and modem do I need? Can someone post a link for exact parts?
Thanks,
neol23 said:
EDIT2: I flashed with odin stock 5.1.1 (P605XXU1EOI5_P605BTUEOJ1_P605XXU1EOI5_HOME) and than rooted and flashed twrp 3.0.2.0.
Than I repeated all steps and flashed 7.1 + gapps + SU.
... SIM Card is NOT detected again... Which baseband and modem do I need? Can someone post a link for exact parts?
Thanks,
Click to expand...
Click to collapse
My bootloader is P605XXU1EPD2 and baseband version P605XXU1EOI5. Try installing Samsung Phone Info from Google Play and check your baseband version. I had to flash to firmware twice to get the new baseband version.
Edit. This is the site I downloaded the firmware:
http://samsung-updates.com/device/?id=SM-P605
I think I downloaded the newest but I'm not certain. Probably all 5.1.1 versions should work.
Good morning
Thanks for all the efforts to let be our device P605 an up to date tool!!!
I'm not sure if already stated precisely in some other post ( in such a case my apologies to ask again) but I would ask to the Developer and even to the Users if this extremely interesting upgrade will let be possible the use of S-pen with the std samsung app "S Note" and if files ( using this device for my work notes I have hundreds of documents to maintain..) generated up to now ( I'm still on 5.1.1) with S Note app could be recovered
Thanks again !!!!
Sent from my SM-P605 using XDA Free mobile app
Squabl said:
My bootloader is P605XXU1EPD2 and baseband version P605XXU1EOI5. Try installing Samsung Phone Info from Google Play and check your baseband version. I had to flash to firmware twice to get the new baseband version.
Edit. This is the site I downloaded the firmware:
http://samsung-updates.com/device/?id=SM-P605
I think I downloaded the newest but I'm not certain. Probably all 5.1.1 versions should work.
Click to expand...
Click to collapse
Indeed the baseband and modem were not updated.
Is there a way to make sure they will once flashing with odin, or I have to check manually after each flash (boot and check in settings)?
Thanks.
Sent from my SM-G935F using Tapatalk
neol23 said:
Indeed the baseband and modem were not updated.
Is there a way to make sure they will once flashing with odin, or I have to check manually after each flash (boot and check in settings)?
Thanks.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Back in the days when I had my Note 3 the correct way to flash new bootloader/baseband was to take off the battery and wait some time, then plug in the battery and immediately to boot to odin mode. Otherwise the new modem would not stick and especially if the new firmware was for a different country code than the original. The other way round was to flash twice. Probably the best way with P605 is to turn of the device, wait a minute and then boot immediately to odin mode.
Squabl said:
Back in the days when I had my Note 3 the correct way to flash new bootloader/baseband was to take off the battery and wait some time, then plug in the battery and immediately to boot to odin mode. Otherwise the new modem would not stick and especially if the new firmware was for a different country code than the original. The other way round was to flash twice. Probably the best way with P605 is to turn of the device, wait a minute and then boot immediately to odin mode.
Click to expand...
Click to collapse
HUGE THANKS!
It worked - flashed twice latest 5.1.1. from sammobile and now I have the same boot and base as yours.
Now 4G works great on aosp 7.1. Also had to restart couple of times. :laugh:
We own 3 years old tablet with the latest firmware - AWESOME! :good:
Still on 6.0.1 on my S7 Edge though... :silly:
Now I only need to find a way to disable the button back-light - it is really annoying...
I use it mostly for games and youtube kids movies for my little son. For book reading also bad, as it will light up on every page change.
neol23 said:
Now I only need to find a way to disable the button back-light - it is really annoying...
Click to expand...
Click to collapse
I will add an option to disable it.
New Build
Changelog:
-merged android 7.1.1
Download
What battery life do u all have? Rom works great but i have 3 hours sot only playing games. With 4.2.2 i got more than 7 hours easy...
Is this normal?
Sent from my SM-G935F using Tapatalk
Anyone know how to installSamsung SNote to this firmware...pls help
Sent from my SM-P605 using Tapatalk
neol23 said:
What battery life do u all have? Rom works great but i have 3 hours sot only playing games. With 4.2.2 i got more than 7 hours easy...
Is this normal?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I've disabled auto brightness and set it to ~40% and... Got 9 straight hours youtube playback via wifi in 30 hours standby. Great! Love nougat.
Think that LTE sucks a lot of power...
If there was a way to disable button light - would be perfect and last rom for my note.
Cheers.
Sent from my SM-G935F using Tapatalk
Hey folks [emoji14]Most of us were disappointed after Samsung rolled out the Android 6.0.1 update to our Galaxy A 2015 series without the new TouchWiz UI from Galaxy S6 and newer, even without updated system apps.
So, I decided to share with you a simple way to update some or most of your Samsung system apps with the new TouchWiz look without a rooted device. All apps for Android 6.0.1 are tested on a Galaxy A3 (SM-A300FU). Of course all apps here may work on other Galaxy devices with Android 5.0+ too
Structure:
Purple = Recently added
Green = Updated
1st Post
-For Android 6.0 only
-For Android 5.0 and 6.0
2nd Post
-Extras
3rd Post
-Installation instruction
-Uninstall updated system apps
Note : All download links which are linked to APKMirror are NOT uploaded by me. I just share them here. Of course all credits go to the Uploaders on APKMirror.
For Android 6.0 only
1. Calculator
Current working version : 5.0.75
Download
2. Camera
Current working version : 4.0 (unstable, not recommend for daily use)
Note : this version is very buggy and may FC constantly and A3 users : do not set the picture size higher than 8MP!
Download
3. Calendar
Current working version : 3.2.05
Download
4. Gallery
Current working version : 3.1.29
Note : Option Story will FC Gallery and requires WallpaperCropper2 to set wallpapers
Download
Stable version : 2.1.93
Downlaod
WallpaperCropper2 :
v2.0.06
Thanks to @Tamerlan2009
Android File Host
5. Memo
Current working version : 16.1.00-419
Download
6. Message
Current working version : 3.0.96
Note : Send messages won't work ! Recieve messages works
Download
7. My Files
New working version : 3.2.26
Download
Previous working version was : 3.1.54
Download
8. Samsung keyboard :
New working version : 1.5.25
Download
Previous working version was : 1.4.62
Download
For Android 5.0 and 6.0
1. TouchWiz Home Launcher
Current version : 1.1.16
Note : No changes. It's still S5 based but with a newer version.
Download
2. Samsung Internet Beta
Current version 5.4.00-3
Note : It's not a sytsem app
Available on Google Play
3. Samsung Internet :
New version : 5.2.03-3
Download
Previous version was : 5.2.02-94
Download
4. Samsung Music
Current version : v16.1.93-9
Note : SoundAlive won’t work because it’s not preinstalled on our A 2015. You can download an alternative Equalizer from Google Play
Download
5. Digital clock :
Current version : 5.0.33
Note : Supports Android 4.2+ according to APKMirror
Download
I am not sure if these apps work on Android 5.0. Please report back if they worked on your device with Android 5.0+
Extras
1. Game Launcher
Requires Android 6.0 and Game tools (available below)
Current working version : 2.0.39-0
Download
1.1 Game tools
Requires Android 5.0+
Current working version : 1.0.57-0
Download
2. Samsung Game Tuner
Requires Android 5.0+ and GameMode (Game Tuner automatically redirect you to the download page on Galaxy Apps)
Current working version : 2.3.6
Download
3. Samsung’s Good Lock UI
Requires Android 6.0
Note : You may experience some glitches in status bar or lockscreen (it’s a bug)
Current version : 24.0.16
Download
4. GameBox Launcher (Beta)
Requires Android 5.0+
Current version : v0.7.2517
Download
5. Samsung Video Library
Requires Android 6.0+
Current version : v1.3.18
Download
6. ShaoNv (Font)
Requires Android 2.1+
Current version : v1.0.01-1
Download
Installation instruction
Just install them like normal apps.
For rooted user : manually paste these apps to /system/apps or /system/priv-app could work but not tested by me (my device isn’t rooted). If you choose this way please do it at your own risk and don’t forget to set permission!
Uninstall updated system apps
You want uninstall the updated system app or you experience constantly FCs? No Problem! Follow the instruction below to downgrade to the old version :
On Android 6.0
Go to Settings > Application manager > YOUR APP YOU WANT TO UNINSTALL > 3-dot/More > Uninstall update
On Android 5.0
Go to Settings > Application manager > YOUR APP YOU WANT TO UNINSTALL > Uninstall update
I tried to update keyboard to the latest version but the app won't install. I get the info that applocation is not installed and settings restore to default... what could be the problem? A8 on 6.0.1
These worked!
Thanks! A7 2015 user here. I managed to install all of these... except the calculator app. Great finds!
bojanilic said:
I tried to update keyboard to the latest version but the app won't install. I get the info that applocation is not installed and settings restore to default... what could be the problem? A8 on 6.0.1
Click to expand...
Click to collapse
The version I linked here are for devices with arm architecture (32-bit) which runs well on A3, A5 and A7 2015 series. I think your A8 uses the arm64 version which is much better than ours or you have already a newer version (pre-)installed
Sent from my SM-A300FU using XDA-Developers Legacy app
Thanks so much dude! Amazing. I've wait so long for this keyboard, amazingly smooth. And the camera works perfect with the two tap function on the home button, it feels like a new phone. The other apps that I've tried it gives a fresh look as well, gallery, calculator and calendar. I guess there's not to much to wait for Digital clock and the recorder app.. maybe.
For now everything perfect on my SM-A500M. Thanks
gonxsster said:
Thanks so much dude! Amazing. I've wait so long for this keyboard, amazingly smooth. And the camera works perfect with the two tap function on the home button, it feels like a new phone. The other apps that I've tried it gives a fresh look as well, gallery, calculator and calendar. I guess there's not to much to wait for Digital clock and the recorder app.. maybe.
For now everything perfect on my SM-A500M. Thanks
Click to expand...
Click to collapse
You're welcome
------------------------------------------
Thread updated :
- Samsung keyboard updated to 1.4.62
- TouchWiz Home Launcher added
- Samsung Internet Beta added
- Samsung Music updated to 16.1.93-9
- and more new apps added to "Extras"
Thank you so much!
Thread updated
- Screenshots added to OP
- Message (v3.0.96) added
- WallpaperCropper2 (v2.0.06) added. Thanks to @Tamerlan2009
- My Files updated to v3.2.26
- Samsung Keyboard updated to v1.5.25
- Samsung Internet updated to v5.2.03-3
Hellow, Messages app don't work for me... I can't send messages. The app open, i write the message and when i press the send button the message disappeared. Please help, i love the messages app!
laur.dr said:
Hellow, Messages app don't work for me... I can't send messages. The app open, i write the message and when i press the send button the message disappeared. Please help, i love the messages app!
Click to expand...
Click to collapse
Hi,
Actually send messages don't work. Well, i don't send messages with the Message app at all. [emoji1]
If you prefer or need the Message app then you can still uninstall the update in settings (check post 3).
Sent from my SM-A300FU using XDA-Developers Legacy app
Oh, the old update it's ugly, i like new version of messages. Of
I tried to update Touchwiz and Calculator but i am getting error on installation.Also i updated so much apps and they are working.Thank you but how can i update Touchwiz and Calculator too.I am getting eror. I have a Samsung Galaxy A700F with Marshmallow.
It work's thanks
Req : a800f incallui with arm and odex file
Plss someone upload for me...thanks