Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
wrong gapps. wipe system and repeat with the correct ones
Please, I know it may seem like I am a some n00b who just registered for answers, but I really need them. I've been browsing this forum (unregistered) but just haven't had anything to post as of late. Sorry guys, I really need help! And you members are the ONLY ones I can turn to at this moment.
Thanks so much, I really appreciate any help!
Glebun said:
wrong gapps. wipe system and repeat with the correct ones
Click to expand...
Click to collapse
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
format system from recovery. Google it. then re flash the rom with the correct gapps
Glebun said:
format system from recovery. Google it. then re flash the rom with the correct gapps
Click to expand...
Click to collapse
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
killakk said:
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
Click to expand...
Click to collapse
In advanced format system
Sent from my GT-I9300 using xda premium
killakk said:
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
Click to expand...
Click to collapse
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Glebun said:
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Click to expand...
Click to collapse
Sorry dude, you've got me confused. I've googled that to no avail, sorry for being a n00b. I really need your help mate!
Ver3go said:
In advanced format system
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey dude, thanks for the reply but how can I go to Advanced Format System pal??
I'm sorry but I'm a n00b and my phone does not start up, keep getting the cyanogen mod logo and after that the errors "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped".
Please help!
Sorry guys I know I'm making it hard on you all because you're having to explain everything to me but I really need help on this, sorry if I'm being a nuisance but I'm really going crazy in the head right now
killakk said:
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
Click to expand...
Click to collapse
wiping from CWM recovery or stock samsung recovery?
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Glebun said:
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Click to expand...
Click to collapse
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
sriram231092 said:
wiping from CWM recovery or stock samsung recovery?
Click to expand...
Click to collapse
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
Click to expand...
Click to collapse
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
sriram231092 said:
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
Click to expand...
Click to collapse
Thank you so very much dude, I love you!
killakk said:
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
Thank you so very much dude, I love you!
Click to expand...
Click to collapse
:good: :good:
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Click to expand...
Click to collapse
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Glebun said:
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Click to expand...
Click to collapse
This was already solved
What was that post for anyway ?
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Take that into acount next time please.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
This was already solved
Click to expand...
Click to collapse
hence the "next time"
Ver3go said:
What was that post for anyway ?
Click to expand...
Click to collapse
for showing him how easy it is to solve problems yourself instead if asking
Ver3go said:
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Click to expand...
Click to collapse
I didn't pick on him nor was I being aggressive. Searching is THE BEST way to learn.
Related
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Cupuffy said:
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Click to expand...
Click to collapse
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
demondor said:
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset(wipe) is an option in cwm(3rd from above) wipe and reflash the rom and let it boot,this can take 10min
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
hisee said:
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
Click to expand...
Click to collapse
I don't know how to check md5, but I already did the wipes and resintall several times, it still loops back into Recovery mode everytime
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
demondor said:
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've tried it just now and its still not working...
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Huupie said:
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Click to expand...
Click to collapse
How would put it into my internal SD if I can't transfer the file because I can only boot into Recovery or Download mode? Do I just Odin it straight in via the PDA option?
If you connect your phone with the PC while in recovery you should be able to use adb commands
Put the rom file into the adb folder than try
Code:
adb devices
now you should see any cryptic combination of letters and numbers in the next row
(if you see a empty row... that wouldn't be nice^^)
then do:
Code:
adb push yourromfile.zip /sdcard/yourromfile.zip
than try flashing again the new file
dont forget to do a full wipe, cache wipe, dalvik wipe, the common procedure^^
PS:
If you don't know about adb, it is installed with the android sdk, but you can download it seperately
place the ADB folder somewhere on you system hd, maybe directly to C:\
the open cmd and type
cd C:\ADB\
now you're able to use the above commands
You can put it on an external sd and flash it from there...
Verstuurd van mijn GT-I9300 met Tapatalk
Thank you, all of you... I will try this tomorrow and tell you guys how it goes!
Thank you so much EVERYONE, It all worked out, seems like the original file was corrupted, now running omega 10 smoothly!!!!!!!
I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
batjon said:
I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
Click to expand...
Click to collapse
the best stock based rom i have come across is this - http://forum.xda-developers.com/showthread.php?t=1998701&highlight=phenom
You don't need to flash a stock rom with Odin and your PC, just use CWM. Just follow the instructions on the page, i've pasted them below for your convenience.
***COMING FROM A DIFFERENT ROM A FULL WIPE IS RECOMMENDED***
***FULL WIPE***
MAKE A NANDROID BACKUP
Wipe data/factory reset in recovery
Wipe Cache & Davilk Cache
Flash Rom in CWM
Reboot
[EDIT] "can I just flash as usual using a ROM manager from the phone being turned on" - yes.
squ89r97 said:
the best stock based rom i have come across is this - http://forum.xda-developers.com/showthread.php?t=1998701&highlight=phenom
You don't need to flash a stock rom with Odin and your PC, just use CWM. Just follow the instructions on the page, i've pasted them below for your convenience.
***COMING FROM A DIFFERENT ROM A FULL WIPE IS RECOMMENDED***
***FULL WIPE***
MAKE A NANDROID BACKUP
Wipe data/factory reset in recovery
Wipe Cache & Davilk Cache
Flash Rom in CWM
Reboot
[EDIT] "can I just flash as usual using a ROM manager from the phone being turned on" - yes.
Click to expand...
Click to collapse
Thanks man, appreciate it. Thanks for not saying "this has been asked before, moderator close this NOW!"
safe
batjon said:
Thanks man, appreciate it. Thanks for not saying "this has been asked before, moderator close this NOW!"
safe
Click to expand...
Click to collapse
You're welcome, you could hit the thanks button seeing as I was so kind
batjon said:
I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
Click to expand...
Click to collapse
You have to do a megawipe if coming back from 4.2 roms, as these roms change the folder structure of internal storage. Dont forget to backup everything in your internal storage or you will lose them.
Many others have faced problems later by not doing a megawipe.
lefttobleed - pardon my ignorance, can this be done within the ROM manager or is it worth going into recovery to do this? I don't have my phone for a couple of days so I can't currently check settings.
Thanks
batjon said:
lefttobleed - pardon my ignorance, can this be done within the ROM manager or is it worth going into recovery to do this? I don't have my phone for a couple of days so I can't currently check settings.
Thanks
Click to expand...
Click to collapse
you have to go into recovery and flash the megawipe aroma file. sorry i dont remember the link for the file. Search for it.
Please note that i am not familiar with rom manager so i dont know whether this can be done with rom manager. I always flash through recovery.
Edit: Please dont try this through rom manager... i feel something might go really wrong.
Hello guys,
I've followed the following tutorial: http://www.youtube.com/watch?v=wLQ51Pg77q4. step by step and all was going well. I was setting up superuser and titanium backup until one of them gave me a choice between two options and then the phone rebooted with the yellow exclamation mark but would just be stuck there. I've tried flashing the original firmware with odin but to no avail. What to do?
Dimitri Stephan said:
Hello guys,
I've followed the following tutorial: http://www.youtube.com/watch?v=wLQ51Pg77q4. step by step and all was going well. I was setting up superuser and titanium backup until one of them gave me a choice between two options and then the phone rebooted with the yellow exclamation mark but would just be stuck there. I've tried flashing the original firmware with odin but to no avail. What to do?
Click to expand...
Click to collapse
After flashing original firmware Go to recovery and do wipe data/factory reset and wipe cache. Reboot
Good luck
Sent from my iPhone using Tapatalk
Jeetu said:
After flashing original firmware Go to recovery and do wipe data/factory reset and wipe cache. Reboot
Good luck
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Well the problem is I can't access the recovery mode any more. What to do?
Dimitri Stephan said:
Well the problem is I can't access the recovery mode any more. What to do?
Click to expand...
Click to collapse
Are you able to boot in download mode?
Dimitri Stephan said:
Hello guys,
I've followed the following tutorial: http://www.youtube.com/watch?v=wLQ51Pg77q4. step by step and all was going well. I was setting up superuser and titanium backup until one of them gave me a choice between two options and then the phone rebooted with the yellow exclamation mark but would just be stuck there. I've tried flashing the original firmware with odin but to no avail. What to do?
Click to expand...
Click to collapse
Try flashing apolo kernel: https://www.wuala.com/pedestre/Kern...N (just CWM & light version)?key=IZz8nJ7ajpFQ through odin Pedestre's work http://forum.xda-developers.com/showthread.php?t=2291756 and remember to press the thnaks button if we helped you :cyclops:
Once you have flashed apolo try and get back into recovery - vol up, home and power - then do data wipe, cache wipe, advanced/dalvik wipe - then go to mounts and format cache and data - DO NOT format your sd card unless you like losing all your saved files lol
Thanks for the help guys but I was able to restore my phone to working order. I am now using the Sentinel rom 5.00 and liking it very much.
Dimitri Stephan said:
Thanks for the help guys but I was able to restore my phone to working order. I am now using the Sentinel rom 5.00 and liking it very much.
Click to expand...
Click to collapse
Glad you sorted it :good: please edit your first post title to include [SOLVED] edit the post to say how you sorted it to help others :good:
i had cyangeon mod but decided to get back to the stock Rom And It Worked 100% and when i decided to Go Back To Cyangeon Mod It Got Stuck In BootLoop Wiped Cache And Dalvik And Factory Reset Still Stuck at the BootLoop
Went Back To Stock Rom And It Worked 100% Tried Dirty Unicorns Rom And It's Also Stuck In Boot Loop I Don't Know What Is The Problem :\ Can any One Help Me To Fix That
AboEl-WaFa said:
i had cyangeon mod but decided to get back to the stock Rom And It Worked 100% and when i decided to Go Back To Cyangeon Mod It Got Stuck In BootLoop Wiped Cache And Dalvik And Factory Reset Still Stuck at the BootLoop
Went Back To Stock Rom And It Worked 100% Tried Dirty Unicorns Rom And It's Also Stuck In Boot Loop I Don't Know What Is The Problem :\ Can any One Help Me To Fix That
Click to expand...
Click to collapse
Ur title is misleading first of all. The way u described it is tat u are stuck in cm rom. But u are stuck on stock. And try the cyanogenmod installer.
Sent from my GT-I9300.
Give a thank if i helped you.
I'm facing the same problem any solutions?
AboEl-WaFa said:
Can any One Help Me To Fix That
Click to expand...
Click to collapse
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
JellyYogurt said:
Ur title is misleading first of all. The way u described it is tat u are stuck in cm rom. But u are stuck on stock. And try the cyanogenmod installer.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
i mean that only stock roms work on my Phone and Cyangeon Mod Gets Stuck u get it now ??
AboEl-WaFa said:
i mean that only stock roms work on my Phone and Cyangeon Mod Gets Stuck u get it now ??
Click to expand...
Click to collapse
Yes its usually user error .
Read the instructions again .
mickay1982 said:
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
Click to expand...
Click to collapse
Oh My God Oh My God Bro You Are a Life Saver <3 After Searching For 3 Days Finally SomeOne Who Can Help Thank You Again <3
AboEl-WaFa said:
Oh My God Oh My God Bro You Are a Life Saver <3 After Searching For 3 Days Finally SomeOne Who Can Help Thank You Again <3
Click to expand...
Click to collapse
no problem, glad I could help
mickay1982 said:
I believe the best option for that kind of jumping from one rom to another is to use newset philz touch recovery and follow the procedure each time you want to flash smth new:
1. Copy your new rom to internal sd card
2. enter the recovery
3. Wipe data/factory reset => clean to install a new rom.
4. install new rom from zip
It's worked for me so far.
Click to expand...
Click to collapse
You saved my life thank you man :victory::good: