[Q] VZW S4 Bluetooth and Headphone Jack - Verizon Samsung Galaxy S 4

Ok with any other phone I have owned in the past I have been able to plug it in my aux jack in my car to stream music but use my BT to make/take calls. The music would pause during the call and when the call ended it would resume playing through the headphone jack.
The S4 refuses to do this, it is extremely a special kind of retarded.
I have researched CSC feature.xml and others/xml codes and build.prop
What is needed to make this work?
I dont want to use LINK as I feel it is just another layer added to what is not needed. I just want it to work like the GNex, N4, DX, Dinc, D1, D2, Charge, and all the other android phones I have owned in the past running both stock (rooted/unrooted) and CM based roms.
Anybody have an idea on what is needed?

What exactly is it refusing to do? Pause when you get a call? What music player (the player must respect the media intents to pause/mute and that has nothing to do with the phone/ROM in that respect).

If something is plugged into the headphone jack and I have a bluetooth device paired and on. When a call comes in it goes through the headphone jack and through bluetooth. If I unplug the cable from the headphone jack then it allows me to use bluetooth to take our talk on the call.
This is the only phone I have owned that does not allow me to pay music through the headphone jack and take calls through bluetooth without having to unplug the cable from the headphone jack.
Sent from my SCH-I545 using Tapatalk 4 Beta

I have the exact same issue with my Samsung S4 and have previously used the HTC Thunderbolt without any issue in my car the same manner.
Somehow the BT audio and mic becomes disabled during calls while the headphone jack is plugged in, if there is a way to enable this and disable audio from the headphone jack that would be the solution. So far I have not found a way to do this through any of the settings, very disappointing. It may need a programmatic solution unfortunately...

The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2

chrishoyt2012 said:
The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Guessing they don't have Bluetooth built into their cars. They are using a headset for calls and an aux jack for music.
Sent from my SCH-I545 using xda premium

Exactly... If u wanted my calls to route through my car I would not mind this. I take my calls privately and thus why I do it this way. I know I can setup multiple bluetooth devices and disable phone on one of them. But I have not found a bluetooth adapter to my liking yet.
Sent from my SCH-I545 using Tapatalk 4 Beta

Bluetooth not working correctly
This is definitely a bug on the s4. In the car I have Bluetooth and an aux Jack. The phone connects fine to Bluetooth and works as long as I'm not using the aux to play music in the car. If I'm listening to music through the aux/headphone jack and I get a call. Bluetooth recognizes the call, music on the phone stops playing, but when I answer, I cannot hear anything. If I unplug the headphone jack I can hear the call. This has been tested on different cars, different roms including stock, and always worked fine on previous phones. Can anyone help? It's easy to reproduce, not sure why more people haven't noticed.

Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
http://www.ebay.com/itm/Motorola-Ca...c-3-4-Atrix-Photon-Q-/360549195891#vi-content

MonkeyTime said:
Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
Sorry,I haven't tried that cable. Do you know why Samsung is doing that? I've had multiple phone including the galaxy nexus by Samsung abd never had this issue.
Click to expand...
Click to collapse

Can't just deselect the "media" (a2dp) profile for your vehicle?
Sent from my device that can send.

I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now

NilsP said:
I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now
Click to expand...
Click to collapse
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget

djcyph said:
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget
Click to expand...
Click to collapse
I took all the defaults and just turned off A2DP

NilsP said:
I took all the defaults and just turned off A2DP
Click to expand...
Click to collapse
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks

djcyph said:
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks
Click to expand...
Click to collapse
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide

NilsP said:
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide
Click to expand...
Click to collapse
thanks bud...will try

update...seems to be working great with default settings...didn't even have to purchase premium, think i might just because i was about to buy a bluetooth transmitter to fix this

I tried sound about and one problem I'm having is when using headphone jack for music and bluetooth for calls it won't play audio for voice dialing through bluetooth but once you make the call it goes to bluetooth. I use Google for voice dialing much faster than svoice. Seems like the first time it works then later after playing music it doesn't. Any setting I should change in sound about
Sent from my SCH-I545 using Tapatalk

I updated to oc1 with nk4 boot loader and now the headphone jack doesn't disable Bluetooth. Sweet.
Sent from S4 using the better than it was then they jacked it again Tapatalk

Related

Using Bluetooth speakerphone and 3.5mm jack simultaneously

OK so here's what I want to do.
I'm currently my Hero as a kar kit by plugging it in via my cars aux input. I also permanently use my phone to play my favorite tunes via the aux input. So when I get a call the music pauses and continues when I'm done talking.
I'm now interested in buying a bluetooth speakerphone as the hero does not have echo cancellation and audio calls echo's back horribly in my car.
Will I be able to pair the bluetooth speakerphone/headset and have music playing via the 3.5mm jack at the same time? Will calls be handled via the Bluetooth device or the audio jack?
Maybe you could ask a Mod to move this to General -> Q&As? It isn't Hero specific & you could get a bigger audience. You should mention what version of Android you'll be running though.
cauli said:
Maybe you could ask a Mod to move this to General -> Q&As? It isn't Hero specific & you could get a bigger audience. You should mention what version of Android you'll be running though.
Click to expand...
Click to collapse
Ah ok, thanks for the tip.
I went ahead and bought the Bluetooth speaker without knowing the outcome. When the phone is plugged into the 3.5mm jack a headphone icon is displayed. When the bluetooth device is connected, a different bluetooth paired icon is displayed.
So what happens is exactly what I wanted - When listening to music via the 3.5mm the audio is played via the car stereo. When a call comes in the music gets paused and the audio get routed the bluetooth speaker.
Inexpensive and simple car-kit solution.
Glad you got a result - & that you posted on it
What kit did you buy to do this? I am looking to do the same!

playing music via Bluetooth?

Has anyone gotten this phone to work playing music through your car stereo through Bluetooth?
I'm paired fine and calls come through stereo, but music still comes through phone speaker. My gf isn't around atm or i'd ask her(she got her HD7 to do bluetooth music on my stereo).
I at least know that once it's paired, it's a phone setting.
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
There should be an option depending on what music player you are using to determine what output you are using. Kinda like if you had a bluetooth earbud, you wouldn't want to play music through it, just receive your calls through it.
ANGERisMYgift said:
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
So all you did was just pair, started music player, then it automatically went through Bluetooth?
No matter what I do, it just keeps going through phone speaker(only calls go through Bluetooth). I've tried with default music player and poweramp.
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
ANGERisMYgift said:
I have mine paired with my Sony Bluetooth car stereo and it plays fine. I did have one instance where it played through the phone speaker but it corrected itself the next day.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
AtLemacks said:
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
Click to expand...
Click to collapse
Under advanced Bluetooth options there is one labeled FTP Server which I believe you need to have on in order to stream music. Hmm... Tried turning Bluetooth on and off on both the phone and stereo, even rebooted phone. Blah!
voxigenboy said:
Under advanced Bluetooth options there is one labeled FTP Server which I believe you need to have on in order to stream music. Hmm... Tried turning Bluetooth on and off on both the phone and stereo, even rebooted phone. Blah!
Click to expand...
Click to collapse
When you pair a headset that is stereo capable, it will pair to 2 things, phone audio and media. Have you tried to unpair and pair and see if that fixes it?
I have paired my Rezound with a set of bluetooth stereo headphones and also with my car stereo. I have noticed that the media audio connection is intermittent. It always *says* that it is connected to media audio, but sometimes the sound comes out of my phone speaker anyhow. I have not figured out how to fix this. It seems to happen randomly (more frequently with my car stereo than with the headphones, but it has happened with both). All I can recommend is to go into a Disconnect/Unpair/Pair/Connect loop until you get it to work. It might also help to power cycle your phone. I just did that last night and it paired and connected properly with my car stereo this morning.
This all of course assumes you have checked "Media" under the options screen for the device with which you are pairing.
AtLemacks said:
I don't have anything bluetooth to try, but there are no options at all to choose output path either in BT or Music player?
Click to expand...
Click to collapse
If it behaves like any other Android phone, when it links up to a bluetooth connection with the audio profile enabled, it should automatically route it's sound to bluetooth, there's no setting in the music player to toggle that.
bfhunt2009 said:
I have paired my Rezound with a set of bluetooth stereo headphones and also with my car stereo. I have noticed that the media audio connection is intermittent. It always *says* that it is connected to media audio, but sometimes the sound comes out of my phone speaker anyhow. I have not figured out how to fix this. It seems to happen randomly (more frequently with my car stereo than with the headphones, but it has happened with both). All I can recommend is to go into a Disconnect/Unpair/Pair/Connect loop until you get it to work. It might also help to power cycle your phone. I just did that last night and it paired and connected properly with my car stereo this morning.
This all of course assumes you have checked "Media" under the options screen for the device with which you are pairing.
Click to expand...
Click to collapse
My car has the option for bluetooth media and when I sync'd the phone to the car last night for the first time it worked flawlessly I didn't have to to anything special. I don't think it's a problem with the phone, maybe the car stereo?
I suspect the phone since I've seen the same intermittent problem both with my car stereo and my headphones. Plus I never had any problem with my original Droid with both those devices.
Sent from my ADR6425LVW using XDA App
Update: did a plain old pair with the HTC HD7 again and the music came through the stereo just fine. Tried again with the Rezound and still keeps going through the phone speakers. Oh well... My fault for trusting HTC.. ;P

[Q] Is it possible to force bluetooth media audio to emulate wired connection?

I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
junkmail9 said:
I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
Click to expand...
Click to collapse
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
h41cyon said:
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
Click to expand...
Click to collapse
Not yet. I haven't found any app or utility that will make the A100 work like a corded link for phone calls.
I am hoping the answer lies in the /system/etc/bluetooth/audio.conf file. I haven't really looked into it because root is needed to test anything there. I plan to resume looking into this once s-off is achieved.
any solutions as of yet????
optiknerv said:
any solutions as of yet????
Click to expand...
Click to collapse
Nothing as of yet. However, the answer is not in the audio.conf file.
Can anyone tell me where the system detects the headphone jack is inserted and then redirects the audio?
Go to the bluetooth settings for your device, you will see two different options "Phone Audio" and "Media Audio". If you only see "Media Audio" your A100 does not support the required bluetooth prodiles to handle phone calls.
These are two separate bluetooth audio profiles, HFP for phone and AVRCP/A2DP for media.
When a phone call comes in, the phone pauses the AVRCP connection for the duration of the phone call, and HFP comes on to handle the call.
This is the device I used for bluetooth media/phone calls in my older model car, nothing spectacular about it but it works decently for being a $40 unit.
Connects via wire/RCA jacks to aux port and needs to be hardwired into power though.
http://www.clarion.com/us/en/produc...es/BLT370/us-en-product-pf_1259392722474.html
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
optiknerv said:
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
Click to expand...
Click to collapse
Exactly. I haven't given up yet, but I agree that information on this is few and far between. Most info seems to be focused on redirecting all audio to mono SDP. With root, it should be possible somehow by re-routing the audio. I'm even ok if the music gets blended with phone audio - it might be annoying, but not nearly as frustrating as not getting phone audio via A2DP.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
any one have anything yet?
App soundabout
Sent from my ADR6410LVW using xda app-developers app
jose51197 said:
App soundabout
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, even SoundAbout can't force the phone audio over AD2P-only devices. I talked (well, emailed) with the author about it last December. He was very receptive to input and he even tried a couple things, but no joy.
This solution requires root and knowledge beyond me. Or, I need to buy an adapter that supports AD2P and SCO and has a microphone.

Bluetooth issues

I am running CM10 on my evo 4g lte. I am trying to connect my phone through bluetooth in my car. I have a kenwood kdc x696 stereo. My phone connects fines with bluetooth, handles call fine but I try to use pandora and play music there is constant crackling through my speakers. If anyone has had this issue and has found a way to fix it. I am about to return my stereo see if that helps, but I dont think its the stereo. I think its my phone. I dont need the bluetooth i can use a cable but having the bluetooth is just easier. Any help would be awesome.
crash2105 said:
I am running CM10 on my evo 4g lte. I am trying to connect my phone through bluetooth in my car. I have a kenwood kdc x696 stereo. My phone connects fines with bluetooth, handles call fine but I try to use pandora and play music there is constant crackling through my speakers. If anyone has had this issue and has found a way to fix it. I am about to return my stereo see if that helps, but I dont think its the stereo. I think its my phone. I dont need the bluetooth i can use a cable but having the bluetooth is just easier. Any help would be awesome.
Click to expand...
Click to collapse
Make sure your min cpu speed is set to 400 plus
Do I need a certain app to change it or is there somewhere in system settings I can do that
crash2105 said:
Do I need a certain app to change it or is there somewhere in system settings I can do that
Click to expand...
Click to collapse
i think i changed the settting the right way. audio through bluetooth still crackles through the speakers. I have decided to exchange the stereo for a different one. Everyone I have talked doesnt seem to know why. I guess we will see what happens. If this doesnt work I guess I will just to go using aux input.
I have this issue with just my wife's EVO, mine sounds great over Bluetooth,but hers has a horrible crackle, both stock JB, any ideas of what it could be?
Sent from my EVO using XDA Premium HD app
Sounds like a bluetooth module error. Calls on older bluetooth at least is mono but music is sterio so it is different. Try a firends bluetooth headset to test. Get your phone replaced. If it still breaks or pauses. I think it is a heat issue. Also try mono mp3 or .wav format.
Sent from my EVO using xda app-developers app
crash2105 said:
I am running CM10 on my evo 4g lte. I am trying to connect my phone through bluetooth in my car. I have a kenwood kdc x696 stereo. My phone connects fines with bluetooth, handles call fine but I try to use pandora and play music there is constant crackling through my speakers. If anyone has had this issue and has found a way to fix it. I am about to return my stereo see if that helps, but I dont think its the stereo. I think its my phone. I dont need the bluetooth i can use a cable but having the bluetooth is just easier. Any help would be awesome.
Click to expand...
Click to collapse
Why don't you just use a AUX cable, I had the same problem.
Are you Rooted?
Have you tried a Factory Reset on your Phone?

Bluetooth streaming in car won't work

First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
I have no problems whatsoever. What rom are you running? Details?
Sent from my Viper DNA
I'd say its a simple menu option on the phone. Mine is perfectly happy to play music and navigation instructions through the Bluetooth. Are you able to make/receive calls through Bluetooth?
Try something for me.
Open up the YouTube app and at the top there will be a blue button. Press it. This toggles sound through speakers/Bluetooth.
Sent from my HTC6435LVW using xda app-developers app
brian85 said:
First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
Click to expand...
Click to collapse
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
damagickid said:
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
Click to expand...
Click to collapse
My wife's DNA autoconnects ever since we originally paired hers to her car, and I don't remember having to enable anything beyond just the initial pairing.
Settings menu for connection
brian85 said:
First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
Click to expand...
Click to collapse
Only one of two things I can think of:
- You get into the car with another device connected with AVRCP capabilities, and it's taking priority over your car's media audio connection. Thus, you're left with the car connected to phone audio, and your bluetooth headphones/Jambox/etc. playing music. HOwever, you specifically mentioned the music was playing through your phone speaker, so the only other possibility is...
- Go into settings, Bluetooth, and click on the sliders/settings icon next to your car's connection name. Ensure both Media Audio and Phone Audio are checked.
Beyond that, I would try unpairing all your Bluetooth profiles and reconnecting them. BT has been pretty finnicky for me, across handsets and accessories.
Sense devices haven't worked well in my car. Other devices have seemed to work a little better. But my car is a 2005. So think it depends on the car software. You might try upgrading the firmware on your car's setup if all of the other options fail.
No BT music streaming here too
Fastlivin said:
Only one of two things I can think of:
- You get into the car with another device connected with AVRCP capabilities, and it's taking priority over your car's media audio connection. Thus, you're left with the car connected to phone audio, and your bluetooth headphones/Jambox/etc. playing music. HOwever, you specifically mentioned the music was playing through your phone speaker, so the only other possibility is...
- Go into settings, Bluetooth, and click on the sliders/settings icon next to your car's connection name. Ensure both Media Audio and Phone Audio are checked.
Beyond that, I would try unpairing all your Bluetooth profiles and reconnecting them. BT has been pretty finnicky for me, across handsets and accessories.
Click to expand...
Click to collapse
I also do not get why my dna won't stream through BT in my car or truck. I mostly listen to Pandora...I know there is a BT setting in the app and I have it enabled. I can receive/make calls fine but if I want to stream Pandora through the vehicles speakers, I have to plug in the 3.5 mm jack. In my BT settings on the dna, I only have Phone Audio, no option for Media Audio? In BT settings, under Advanced, there is FTP server (not checked) and Message access, which is checked and that's it? I have not tried another music source to try to stream, but I'll try that next. Update: just tried Slacker radio and it doesn't come through the vehicles speakers either
---------- Post added at 11:23 AM ---------- Previous post was at 10:52 AM ----------
Bigandrewgold said:
Try something for me.
Open up the YouTube app and at the top there will be a blue button. Press it. This toggles sound through speakers/Bluetooth.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
For me, I do not see any blue button at the top in my YouTube app?
---------- Post added at 11:36 AM ---------- Previous post was at 11:23 AM ----------
damagickid said:
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
Click to expand...
Click to collapse
Where exactly is this "radio option" you mentioned? I do not see any setting for that in Bluetooth on the DNA, maybe you have that option in your BT settings in your car? Can you actually stream Pandora in your vehicle through BT on your DNA (stock?)
pumah350 said:
For me, I do not see any blue button at the top in my YouTube app?
Click to expand...
Click to collapse
You have to be connected to a Bluetooth device. Its next to the sear h button.
Sent from my HTC6435LVW using xda app-developers app
My car, when pairing asks for a second step to enable Bluetooth audio... it may be a setting within the cars BT system...
Sent from my Transformer Prime TF201 using xda app-developers app
There is a Bluetooth audio streaming problem with the recent non-GPS Toyota head units. I have a 2012 4Runner, and I'm only able to get the Google Play Music app to stream for a few seconds. The phone thinks it's still working, but nothing is getting through to the stereo. There was a thread about this started over on Rootzwiki. I've been told that the stock HTC music app will work, but in don't keep any media on my phone. I've tried Audible, Play Music, and Dog Catcher. Bluetooth calls work just fine.
pumah350 said:
I also do not get why my dna won't stream through BT in my car or truck. I mostly listen to Pandora...I know there is a BT setting in the app and I have it enabled. I can receive/make calls fine but if I want to stream Pandora through the vehicles speakers, I have to plug in the 3.5 mm jack. In my BT settings on the dna, I only have Phone Audio, no option for Media Audio? In BT settings, under Advanced, there is FTP server (not checked) and Message access, which is checked and that's it? I have not tried another music source to try to stream, but I'll try that next. Update: just tried Slacker radio and it doesn't come through the vehicles speakers either
Click to expand...
Click to collapse
It isn't enough that your head unit is "Bluetooth enabled". There are many capabilities: phone, hands free, BT audio, etc. On many models, only phone capabilities are included. For BT Audio to be output, you need a head unit that is A2DP capable (above, I typed AVRCP, which is incorrect - AVRCP allows the BT device to control playback...the RC stands for remote control). A2DP is the profile the BT device (in this case your head unit) uses to tell the phone what capabilities it can handle. In this case, it's only telling the phone it has headset capabilities, and therefore will never output audio. Solution: get a new head unit, or just continue to use the 3.5MM jack, which has two benefits: it's ****ing free, and you can take advantage of the Beats Audio amp within the phone.
FYI, with stock Hyundai, Kia, Ford Sync head units, I've been able to output all audio: Google Music, Pandora, Slacker, DoggCatcher, along with all system sounds and notifications. I really don't think this is a phone problem, it's usually something going wacky at the car's end. See bluefoam's comment above about having to enable A2DP in the car's settings. Never seen this, but proof of the idiocy of head unit makers sometimes.
Hope that helps. This doesn't seem to be an issue with the OP, because he said he'd been able to play music over BT with other phones, so I'm intrigued to know if this is a problem with an unchecked box like I mentioned, or if there's something else going on.
Fastlivin said:
It isn't enough that your head unit is "Bluetooth enabled". There are many capabilities: phone, hands free, BT audio, etc. On many models, only phone capabilities are included. For BT Audio to be output, you need a head unit that is A2DP capable (above, I typed AVRCP, which is incorrect - AVRCP allows the BT device to control playback...the RC stands for remote control). A2DP is the profile the BT device (in this case your head unit) uses to tell the phone what capabilities it can handle. In this case, it's only telling the phone it has headset capabilities, and therefore will never output audio. Solution: get a new head unit, or just continue to use the 3.5MM jack, which has two benefits: it's ****ing free, and you can take advantage of the Beats Audio amp within the phone.
FYI, with stock Hyundai, Kia, Ford Sync head units, I've been able to output all audio: Google Music, Pandora, Slacker, DoggCatcher, along with all system sounds and notifications. I really don't think this is a phone problem, it's usually something going wacky at the car's end. See bluefoam's comment above about having to enable A2DP in the car's settings. Never seen this, but proof of the idiocy of head unit makers sometimes.
Hope that helps. This doesn't seem to be an issue with the OP, because he said he'd been able to play music over BT with other phones, so I'm intrigued to know if this is a problem with an unchecked box like I mentioned, or if there's something else going on.
Click to expand...
Click to collapse
Yes, very helpful, thanks. And yea, its really not a big deal to plug in the jack...my car and truck both came with audio jacks so at least there's that.

Categories

Resources