So I created these instructional videos to help newbies out with loading ROMs etc.
TO ADVANCED USERS: I know that these procedures are not new but the instructional videos have seemed to help a lot of newbies and I think it would benefit anyone weary of attempting these procedures.
Please don't post how this is old news, I am well aware. These are just for newbies to help them get started. It also should help eliminate newbies asking the same questions over and over as most are answered right under the videos, and I'm sure you'll appreciate that
MODERATOR: Please sticky or add to any tutorial threads for the sake of the newbies.
Hope this helps some people out! Enjoy!
If anyone wants me to do any other videos in particular please let me know.
How To Load HardSPL, Radios, and a Custom ROM -
http://theunlockr.com/2009/09/13/how-to-load-a-custom-rom-onto-your-windows-mobile-phone/
i can follow these instructions
but i want to know if i do this will the three steps in the video. will that enable the gps in the phone? i have the same phone as in the video. if i use these steps (very clear very easy) will that unlock the gps or do i have to use a different rom. If so a link to that rom to use?
Check it out Read the Full Article at the link below with written step by step directions:
http://linuxboxsolution.com/...andr...-box-solutions-get-started-android-illuminate
Great video! Very helpful and needed. Thanks for the hard work
Dear Android Fans,
I have searched a lot and not found a working solution yet. I have seen postings in that area though ... therefore I'm posting here, hoping that I did not miss anything:
I have a S3 I9300 with CM11 (Build cm_i9300-userdebug 4.4.2 KOT49H InstallerXNPQ08Q, Build date 19-Feb-2014 17:25:29).
I aim to visit websites having flash (e.g. Adobe's Test page[/URL or a [URL="http://portevergladeswebcam.com/"]site I often visit).
I have followed the step by step guideline without success. Repeated it multiple times to ensure that I did not miss anything.
Is there any fix or pack to install or any type of workaround, that I can still view sites with flash ?
Thank you in advance.
Best regards
Zac_df1
HI guys, after waiting for so long I finally decided that its time to do something for the Neo, as there are no custom kernels for our device I decided to take the matters in my hands. After doing some research and following some video guides i succeeded in :-
.Installing Ubuntu (VMWARE) v14.02
.Installing packages required for developing
.Setting up a toolchain
Now I am stuck at the last process as mentioned in the guide. I already created a zImage file, but i cant find the ANYKERNEL.zip required to flash the kernel. If someone knows any dev, or can help me with it, it will be appreciable.
Following I provide the link for the video and guide:-
The main video guide :- http://www.youtube.com/watch?v=IV4jhXWc7AE (also watched the 2nd part).
The guide from where i got the link for tool chain as the NDK from android.developers.com was .bin file and I was not able to figure out how to use it. :- http://www.youtube.com/watch?v=vVZrh7aBIw4
Please if any dev can help me please PM me
Regards. :fingers-crossed:
EDIT:- Mods if i have posted this in wrong section, please move this thread to the correct section as I have a very limited knowledge regarding post
man thanks for your efforts first of all.secondly if you are getting stuck somewhere then its best to contact a dev who has worked on exynos processor before.for example try contacting a dev who have made a kernel for note 3 exynos version they are our best chance...thanks again and i really want to help but i know nothing about kernels
Hello Everyone,
I am trying to learn how to port CM12 to my I717 and there are many threads on XDA that provide a lot of information on how to port a ROM from source. However, I am stuck as place and can't figure out what to do, so please excuse my lack of knowledge and please guide me through this process.
First I started following this thread to do the porting. It has an excellent walk through, but somewhere I missed a step and can't f figure out how to handle it.
forum.xda-developers.com/showpost.php?p=40003302&postcount=2&nocache=1
I am lost at the Device Source instructions provided in Step Two (2). What should my command line for I717.
Second, I realized that when I did the Repo Sync for CM12, I remember that I Sycn in the ./CM12/ folder, however, all the folders are downloaded in the home folder.
Whatever the reason, I screwed up somwherre. Can I move all the folders to the CM12 folder, if so how? Would it be better if I delete all the Sync folders in the home location and re sync in the CM12 folder?. I prefer that I do it the second method, but not sure which folders to delete and how to do that?
I am using Ubuntu (Please note that I am new to Linux, But willing to learn).
I would kindly request you to please help me learn by providing step by step instructions.
Thank you for your time to help me with this issue.
Start from scratch.
Using this thread:
http://forum.xda-developers.com/showthread.php?t=2257149
Set up your build environment. This link is tailored to our Note-1, not a generic "insert_your_device_here" recipe for destruction. Slap JamieD's "thanks" button while you're at it.
Build CM10.2 or CM11 first, to get the hang of it.
I've attempted to build CM12 on my own. My conclusion is that unless you're willing to re-write about half the CM source code from the ground up, CM12 isn't going to happen for us. Android 4.3 and above were extreme hack/hatchet jobs for both the Note-1 and the Skyrocket (they're sister devices). CM-11 almost didn't happen at all; it took us nearly six months to get a reliably working CM-11 build.
Indeed, CM-12 isn't happening for a LOT of devices, this "early" in the game.
-blaine
nepotist said:
Hello Everyone,
I am trying to learn how to port CM12 to my I717 and there are many threads on XDA that provide a lot of information on how to port a ROM from source. However, I am stuck as place and can't figure out what to do, so please excuse my lack of knowledge and please guide me through this process.
First I started following this thread to do the porting. It has an excellent walk through, but somewhere I missed a step and can't f figure out how to handle it.
forum.xda-developers.com/showpost.php?p=40003302&postcount=2&nocache=1
I am lost at the Device Source instructions provided in Step Two (2). What should my command line for I717.
Second, I realized that when I did the Repo Sync for CM12, I remember that I Sycn in the ./CM12/ folder, however, all the folders are downloaded in the home folder.
Whatever the reason, I screwed up somwherre. Can I move all the folders to the CM12 folder, if so how? Would it be better if I delete all the Sync folders in the home location and re sync in the CM12 folder?. I prefer that I do it the second method, but not sure which folders to delete and how to do that?
I am using Ubuntu (Please note that I am new to Linux, But willing to learn).
I would kindly request you to please help me learn by providing step by step instructions.
Thank you for your time to help me with this issue.
Click to expand...
Click to collapse
Don't give up just yet, we have been working diligently on source bringing it up to 5.0. If you like you can follow my work & get involved yourself? Please checkout my github and get you some builds going. There more Devs we have then the better we can make this device. My GITHUB