Help with installing rom - Android Q&A, Help & Troubleshooting

Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me

Installing Roms on Galaxy Note II
Try rebooting the phone, that usually works for me when my phones get stuck booting up.

nigerson said:
Hello, I am new to the rom installing process. So, what I do is I take the .zip file, drag it onto my phone then I install the .zip on my phone. It says that it works, but when i try and boot it up every single rom gets stuck at boot screen. I'm on a ATT galaxy note 2. Please help me
Click to expand...
Click to collapse
There are a few possibilities of what could have happened. The most possible one that I can think of is that you did not Wipe Data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.Boot into recovery. 2. choose the wipe data/factory reset option(U will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your ROM again.
Hope that helps

thank you
geoworld_200 said:
there are a few possibilities of what could have happened. The most possible one that i can think of is that you did not wipe data/factory rest before flashing your rom. When updating to a new rom, it is most of the time necessary to choose wipe data/factory reset from the recovery before flashing. So what you do now is: 1.boot into recovery. 2. Choose the wipe data/factory reset option(u will loose all ur apps that u have downloaded, your photos music and videos should remain intact tho) 3. Flash your rom again.
Hope that helps
Click to expand...
Click to collapse
thank you works perfectly!!!

Related

[Q] Is there a fix for lost vibration?

First of all, I'd like to apologize in advance if a similar thread has been made. I rooted my sister's SGS2. (i9100G) and she downloaded a ROM she said she wanted. Absent mindedly, I flashed it without knowing that it was an i9100 ROM. So it was stuck on the boot screen and I had to download an official GB firmware off sammobile.com . After I restored via Odin, her phone's vibration seemed to be lost. I tried calling her with vibration set to always and still no go. So is there anyone who knows the fix for this? It's pretty urgent because she's going back to her uni next week which is a few hours from where i am.. so yea. Any help would be very much appreciated!
you should root the phone, with any kernel that has CWMR.
then download any CWMR flashable rom. almost every coocked rom it is this way. place it in a folder inside your internal memory
Then in CWMR (volume up+home button+power button, when phone is off) you, wipe data/factory resets, wipe cache, wipe dalvik (sometimes is inside advance options), enter mounts&storage-->format /system
then choose select install zip from SD card. and select the rom u downloaded.
wipe cache and dalvik again
then go to reboot and see if it is fixed!
that should work...then u can flash any other rom trhough ODIN again

[Q] [SGS3]Stuck at Samgun Logo. All options have been expended, Desperately need help

Okay, So.. As the title says, i have googled for DAYS, Tried every damn thing i could get my hands on..
Now.
So far, im able to get into download mode, and also into recovery mode, I've tried doing a factory reset, and then flashing a stock rom, and i've tried every concevable method of fixing this damned phone, Its driving me crazy, I flash a new rom with odin, phone reboots, (adds to count) and is STILL stuck at that ****ty flashing samsung logo..
I'd really appreciate ANY help i can get, And i AM a noob at this, So i dont FULLY understand EVERY detail of this, But i've read around enough to know a few things.
My SGS3 has been out of commision for longer than i've actually used it.. So.. Yeah, Getting quite desperate!
Please let me know if there are any particular details yyou need!
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm :good:
try this first before thinking of efs errors!
.
exprxp said:
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Click to expand...
Click to collapse
Please elaborate, How would i do this with odin?
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
Click to expand...
Click to collapse
Pretty sure that i've done this by accident, But will try again to be 100% sure, Ill get back to you.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm
try this first before thinking of efs errors!
Click to expand...
Click to collapse
Again, Please elaborate, How do i go about doing this, I've never seen an option to delete the 'Dalvik cache'
Thank so damn much for the help so far guys, i really appreciate it!
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
loriz said:
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
Click to expand...
Click to collapse
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Bäcker said:
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Click to expand...
Click to collapse
i just want to clarify... when you say 'flash STOCK rom' Do you mean i need to get a rom for a SGS3 VAU (Vodafone Asutralia) and flash that (go to odin, put it in PDA, etc)
and if THAT is the case.. Where would i get said rom, Because i've downloaded it from sammy firmware 4 times, each time it finishes the download without a hitch, when i go to extract the zip to get the needed files, it says its corrupted or some such BS..
Go to Sam mobile and download the firmware mate.
You will end up with a tar md5 file you flash using PDA section of Odin.
Good luck!
Sent from my GT-I9305 using xda app-developers app
Kies is by far the easiest and safest way to factory reset. I have had to use it about 3 times in the past 6 months because I have flashed something I shouldn't have. Plus Kies now has a lite mode that is quicker at flashing your phone back to stock firmware.
serbpower said:
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
Click to expand...
Click to collapse
Slightly puzzled by you not having an "advanced" menu option. Which CWM version do you have?
Okay guys it seems ive fixxed my s3, after 4 long months lol..
What i did:
Installed Kies, Got my phone into download mode, Let kies to a PROPER wipe of the phone, (Phone, pds, csc) and it just ****ing straight up fixed everything...now i just need to find a thread that shows me how to COMPLETELY backup my ENTIRE phone, Every damn fkn Kb.. And ill be rooting it again lol
Thanks everyone!

[Q] "Custom Stock (Codename: ETERNITY)" android™ Galaxy S II rom

hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy

Samsung ROM Flashing Problems

Hi. this is Andy. may i have yous help for ROM flashing?
i try to flash my rom yesterday but not success. i updated the recovery with CMW and saved the rom (zip) in sdcard. and i process the flashing. cause error and couldn't go ahead and abort the process automaticall. i try another rom but got the same result.
finally i can't turn on my phone. just stay on samsung logo screen. i used with odin and flash a mds5 file for recover is fine. but i found that odin can't input a zip file. all are tar or mds5 file.
Am i have some step wrong or missed? did yours have a step by step and show me how to do??
may i have all yours help??
thanks in advance !!!!!!
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
porcupinesoft said:
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
Click to expand...
Click to collapse
Thanks in advance, i will try that and update you again. thank you very much.

SemiBrick after CWM install

i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
NeguitO said:
i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
Click to expand...
Click to collapse
Try this first.
If your device is stuck at boot animation or facing boot loop issues then try the following steps:
Disconnect your phone from computer, close Odin and remove phone's battery. Reinsert it back within 3 to 4 seconds, re-launch Odin and then repeat the tutorial from step 4.
Click to expand...
Click to collapse
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
warrior1208 said:
Try this first.
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
Click to expand...
Click to collapse
Thanks you! my S II is ok now.

Categories

Resources