Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
fredi0014 said:
Hi Guys
First time writing here,hope to finde a soluttion.
I bought a Galaxy Note 2 Verizon(sch i605),since I was not using it in Verizon I was not able to send SMS and a pop up appears all the time,telling me that the SIM is not Verizon etc
To fix those things I rooted it and installed JEDI X ROM.Everything seems fine.
I saw that the version of rom says T Mobile when Jedi X was Installed
So i thought If I will install T mobile stock ROM,In my verizon,sms and everything will work fine and I will not have anymore a rooted phone.
I used ODIN to put the file,everything seems fine,but now it has stuck in a boot loop
When I turn it on it says samsung and get restarted,all the time just restart
I can not go to recovery ,but I can get to download mode
I have tryed everything I could for 9 hours,but nothing
I sent it to a Local Service repair and they said they have Tried J TAG and no results at all
So i wana ask,What can I do?
Thank you so much in advance
Click to expand...
Click to collapse
you could also try using a jig, but since it goes into download mode just flash the alt odin package.
shangrila500 said:
Have you tried flashing the alternate restore and the PIT together in ODIN, while in DL mode, from droidstyles post? What about root66 along with the PIT? What about those 2 alone?
Your mistake was flashing Jedi in ODIN when it is supposed to be flashed in the custom recovery.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
fredi0014 said:
ALTERNATE RESTORE WITHOUT PITE FILE
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ALTERNATE RESTORE WITH PITE FILE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
GETS STUCK HERE FOR 20 MIN AND MORE
The same with Root66
Click to expand...
Click to collapse
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Have you tried different cords?
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Yes different cord,pc and operating systems
Related
Hi to all.
I have a galaxy gt i9100 an 4.0.3 on it. I flashed siyah kernel 5.0.1 with odin and no my phone does not boot. Its stock on screen displaying Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
I try to flash rom I9100XWLS8 with odin and i only get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I can`t flash anything with odin. pls help me.
Sorry for my english.
Re: [Q] Firmware upgrade encountered and issue
What state is the phone in now. What modes can you access?
Sent from my GT-I9100 using xda premium
Its stuck on screen displaying Firmware upgrade encountered and issue. I can access only download mode.
Re: [Q] Firmware upgrade encountered and issue
And your phone is no longer recognised by odin?
Sent from my GT-I9100 using xda premium
Odin is recognising my phone, but when i try to flash a rom i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Re: [Q] Firmware upgrade encountered and issue
Ok re download the rom from samfirmware and try again. Not sure if it's a single PDA file or several CSC modem etc. Reflash.
Sent from my GT-I9100 using xda premium
I tried but i only get Complete(Write) operation failed
YUPEEEEEE:victory::victory::victory::victory::victory:
I got it.
I downloaded odin 1.3 and flashed successfully my phone.
Here is odin 1.3 if someone needs it.
View attachment Odin3_v1.3.rar
Well done mate.
Sent from my GT-I9100 using xda premium
HaHa congrats
I have tried everything posted above
In addition my model is GT-I9100G
doesnt go to download mode or recovery mode (earlier it was)
Earlier i was facing an issue that whenever i start it....it displayed "CWM 6.0.3.2" "WARNING : No file_contexts"
Please help
I'm getting the same problem on my sm-g318h trend 2 lite but it doesn't get fixed like his.
ive gotta major problem with my device. after trying to flash a stock rom (it crashed while flashing) i m unable to flash any rom. everytime i try to flash another one it says
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
"
i almost tried everything... i only can access the download mode on my phone... even the recovery is gone .
please help me fellas
thanks in advance !
Try flashing only a recovery (CF, Perseus, TWRP, etc) through ODIN and check if it is successful. The log seems to error out when flashing the recovery.
If successful, try flashing the stock ROM again.
If not, download another stock ROM and check if you can install it.
Just speculations. Dunno if it will actually work. The last resort is, of course, the service centre. Good luck! :thumbup:
Sent from my GT-I9300 using xda app-developers app
I had the same problem mate. You just need to flash the stock recovery using PC ODIN. Once you've flashed the stock recovery, you'll be able to flash any ROM properly. Im 99% sure this will work.
I got a problem with my Note-2. Stuck on the samsung logo screen. (flash rom long time ago, i can't remember that rom but it's 4.1.2)
Can boot in CWM and download mode. I tried to wipe data/cache/dalvik but didn't work.
- Abyss kernel : not work
- pit file 16 gb : not work
- use 3 computers : not work
Here is log when i tried to flash stock rom.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME1_N7100OLBDMD2_N7100DXDLK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
nookdee said:
I got a problem with my Note-2. Stuck on the samsung logo screen. (flash rom long time ago, i can't remember that rom but it's 4.1.2)
Can boot in CWM and download mode. I tried to wipe data/cache/dalvik but didn't work.
- Abyss kernel : not work
- pit file 16 gb : not work
- use 3 computers : not work
Here is log when i tried to flash stock rom.
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
N7100XXDME1_N7100OLBDMD2_N7100DXDLK5_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
FAIL!
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Read droidstyles post in Development, its stickied, and follow the section on returning to stock.
Try the alternate ROM with and without the PIT first and if that doesn't work try the others.
Sent from my SCH-I605 using XDA Premium HD app
Hi, I followed everything in the how to get root video on the Galaxy S4, but when I tried to flash it to the 423399 kernal (so I can eventually obtain root), it failed. No I am stuck. I can only get to the odin download screen and if I just try to boot it normally it goes to the firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. When I reboot into Odin download, its connected and I load the 423399 into PDA then Start. Here's what I get.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MD2_423399_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know why but it keeps Removing. I am no longer getting a blue load bar under the Downloading... Do not turn off target!!
I can not get into recovery mode either.
Any help would be much apprectiated!
I tried the "Unbrick method" by flashing the stock restore. Didn't work.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PaulJ69 said:
I tried the "Unbrick method" by flashing the stock restore. Didn't work.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
is usb debugging turned on on the phone?
theidoctor said:
is usb debugging turned on on the phone?
Click to expand...
Click to collapse
He said he can't get his phone to load so therefore he can't enable USB debugging. I sent you some info to try and assist you. Message me back if you need anything.
So after trying a ton of different things and kept getting the same
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
I figured it was something on my end removing the connection. I took out the USB cable and plugged it directly into the back of the motherboard and Bingo! it worked!
Thanks again DarkMenace for sticking it out with me!
PaulJ69 said:
So after trying a ton of different things and kept getting the same
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
I figured it was something on my end removing the connection. I took out the USB cable and plugged it directly into the back of the motherboard and Bingo! it worked!
Thanks again DarkMenace for sticking it out with me!
Click to expand...
Click to collapse
Anytime.
Sent from my Rooted Verizon Samsung Galaxy S4 using xda premium
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
ezekiel131 said:
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
Click to expand...
Click to collapse
I have the exact same problem. Did you came out with a solution?
Can u boot ur fone? Did u factory reset like it said?
Sent from my GT-I9300 using xda app-developers app
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
rennyhernandez said:
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
Click to expand...
Click to collapse
Why did u not lol... So u can't boot normally?
Sent from my GT-I9300 using xda app-developers app
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
rennyhernandez said:
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
Click to expand...
Click to collapse
I've got the same problem.