Hello World!!
Here I'm going to write about the De_Odexing way of our MMX Canvas HD A116!! Yes that's true, without any SPTool flashing or any CWM/TWRP flashing.. As many of us probably hate to Flash via the mentioned methods all the time for much many reasons.(Like Me!! :silly
Usage of Deodexing - To apply as many mods as the Custom ROMS do without flashing any CUSTOM ROM. As they were built for DE_ODEXED Firmwares. And No, No, No De_Odexe-ing dose not affect your phone either the way practically. After even doing this I got the same Battery Efficiency and Smoothest as the STOCK ODEXED one.
Like [APP][LAUNCHER] Modded "Galaxy S4" launcher(TOUCHWIZ) and weather widget from my friend anmol7ify
Here i'm going to explain a way to De_Odex your Stock Firmware JellyBean 4.2.1 very smooth way..
Please Note : After doing or attempt to do any of the below mentioned stuff please please and third time PLEASE make a BACKUP of your ROM viz. NandroidBackup. the ways..
In CWM -> restore and backup -> full NandroidBackup
In TWRP -> BackUp -> don't tick anything other then what is already ticked with includes BOOT and DATA and the third SYSTEM -> Swipe to Back Up (If u want to then u may cross the "Enable Compression" or u may "Skip MD5 generation during BackUp") (I personally use "Enable Compression" option not the other one, seriously!!)
Now the tools you need to begin are as follows...
-> Rooted A116. I used the S4 Rooting method just one click... Check Me!! by djrbliss
-> Download Busybox installer and install the latest version of busybox compatible with your device.
-> JAVA for x32(32-bit Windows System) and x64(64-bit Windows System)
-> ADB.zip Credits : DEADLY
-> xUltimate 2.4.2 by xeudoxus
-> DeodexTool_AutoDEOTool_JDmod Dev_Host by devilsking
-> Some patience..
Now We Begin...
-> install JAVA as per your system requirement. x64 or x32. you can check it in Control Panel->System and Security->System -> Check the line System Type
-> Un-Zip the downloaded Tools viz. xUltimate and DeodexTool_AutoDEOTool_JDmod and ADB.zip anywhere even on your desktop will do good.
We are good till here...
Connect your phone turned "On". in any case you failed to load the ADB Drivers on to your system then please follow the steps
-> Connect your Phone let the system detect the drivers(Don't worry the "Micromax A116" will fail!! as, expected)
-> Download this Installer from HERE
-> Run It. And let it do the process. As it will Detect your Phone HTC in Manufacturer Row and A116 in Description. Click Install the last second Click from the right.
-> Your MMX will have Now ADB access and proper drivers Configured. Congratulations!!
Now the xUltimate you just Un-Zipped on your Desktop(I presume!!) Open it and run "Main.exe" as "Administrator" from it a CMD window will start with "Checking Script version.." and with that it will take You to the options with your ROM mentioned as "ALPS.JB2.MP.V1.2"
-> First i.e. our last resort is "BackUp" hit the "6" o your NumPad, this will back up everything original(Afterall I presume that you did took a NandDroid backup but still we take no chances) Then "3" on NumPad (3) Backup All. let it be green.
then pres to continue.
-> Now from there hit "1" on NumPad tis will select Option (1) Pull /system/app/ from phone (origi_app) let it be green i.e finish and You have to press any key to continue.
-> Now from there again hit "2" on NumPad this will select Option (2) Pull /system/framework/ from phone (origi_frame) let it be green again i.e finish and you have to press any key to continue.
Now here the work of xUltimate is finished. thanksss for this beautiful tool xeudoxus
Now you have to jump in DeodexTool_AutoDEOTool_JDmod by devilsking credits to him for making another beautiful tool.
->Hope you just UN-Zipped on your Desktop(I presume!!) Don't Open it.
->Now download the given smali and backsmali version 1.4.2 from google codes in the attachment and Un-Zip it in the folder AutoDEOTool_JDmod in DeodexTool_AutoDEOTool_JDmod i.e. DeodexTool_AutoDEOTool_JDmod/AutoDEOTool_JDmod.
->Download the AutoDEOToolMain.bat from attachment. Replace it with the the given attachment in DeodexTool_AutoDEOTool_JDmod/AutoDEOTool_JDmod and run "AutoDEOToolMain.bat" as "Administrator" from it a CMD window will start with green fonts.
->Now open the folder i.e xUltimate-v2.4.2\origi_app and copy all the contents from it to DeodexTool_AutoDEOTool_JDmod\AutoDEOTool_JDmod\_app
->Same do with the Framework i.e Now open the folder i.e xUltimate-v2.4.2\origi_frame and copy all the contents from it to DeodexTool_AutoDEOTool_JDmod\AutoDEOTool_JDmod\_framework
->Now in "AutoDEOToolMain.bat" (that you previously opened as I mentioned above)
->Select Hit 1 on your NumPad and it will run 1 DEODEX ALL (Stock Rom).
the process will start let it finish. It take about 10 to 15min. to complete. As it finishes the window will take you again on Main Screen.
Note : this process will through an error while deodexing "core.jar" don't panic. Let it finish the work first.
As you are dragged back to main screen as the process is finished. Now type "50" on your NumPad this is for changing smali and backsmali version. Now hit "1" on numpad. You had selected the smali and backsmali ver. to 1.4.2, Congratulations!!
->Now again you hit "1" on NumPad this will beign the process again but not from the start but directly with core.jar and this time it will end Successfully.
->Then Go to DeodexTool_AutoDEOTool_JDmod\AutoDEOTool_JDmod\_framework and copy the contents of it to the DeodexTool_AutoDEOTool_JDmod\AutoDEOTool_JDmod\deodexed_JAR
Now you have De_Odexed your APPLICATIONS and FRAMEWORKS successfully. Again Congratulations!! Hurray!!
->Copy both the folders deodexed_APK and deodexed_JAR to your "sdcard"(external sdcard specifically on our A116, Thats serious!! I repeat It's seriously had to be in "sdcard").
->But still you are a step away from applying your De_Odexed APPs and FRAMEs to your ROM without flashing it with anything.
->Now you got everything to make it work.
->I know you downloaded athe ADB.zip from this attachment, it is a simple ADB SHELL so let it get in action.
->Open the Un-Zipped ADB folder on your desktop(I presume, Again!!)
open a CMD window in here ADB/Android by holding SHIFT on keyboard0 + Left CLICK on Mouse the List will have an option "Open Command Window here" after Undo option.
->Now place the command as mentioned below one by one with having a minute after each command given.
(if you are using adb shell in su for the first time, keep phone screen on. After entering "su" code, superSU request prompt in phone. Press allow)
Code:
adb shell
su
stop
mount -o rw,remount /system/ /system/
cp /sdcard/deodexed_APK/* /system/app/
rm /system/app/*.odex
cp /sdcard/deodexed_JAR/* /system/framework/
rm /system/framework/*.odex
mount -o ro,remount /system/ /system/
reboot
Credits to : chamatht
NOTE : In this command prompt-ing your phone display will appear to be black. Don't Panic!!
->After this is complete take out the battery and, boot to CWM/TWRP with the BOOT KEYS (Vol.Up+Vol.Down+Power Key -> Press Vol.Up again to boot into recovery)
And FacoryReset and Wipe Dalvic + Cache. That's It!
Some Important points :
If the abd in command prompt throws an error you could restore your backed-up things from CWM or TWRP.
Don't panic. And I know there are still other better ways and diffrent that you can change much then a lil' in this procedure. But I just shared my experience. So, After giving you all readers as many thakx and congratulations I belive you had Successfully De_Odexed your Stock ROM.
Credits and thanxxxx to everyone for making it possible!! Just Comment and PM me if I forget to Credit any... and of-course thankxxxx and Credits to anmol7ify for boosting me to make this thread!!! :highfive: :victory: :fingers-crossed:
please if I can help you in anyways for getting it through. please PM me or Comment so i can help you to my best. ThankYou!!
Enjoy!!
Will this work for 4.1.2 stock rom?
sreeramllb said:
Will this work for 4.1.2 stock rom?
Click to expand...
Click to collapse
It sure will.. But it is good if you get on to 4.2 Android..
Sent from my A116
my phone stucked in boot loop...
i don't know why....all things went good...
but i saw that after replacing backsmali
the error was there of code.jar
please help me out of this...
I am getting following errors when running codes
D:\MMX\Deodex\Android>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ su
su
[email protected]:/ # stop
stop
[email protected]:/ # mount -o rw,remount /system/ /system/
mount -o rw,remount /system/ /system/
[email protected]:/ # cp /sdcard/deodexed_apk/* /system/app/
cp /sdcard/deodexed_apk/* /system/app/
[email protected]:/ # rm /system/app/*.odx
rm /system/app/*.odx
rm failed for /system/app/*.odx, No such file or directory
255|[email protected]:/ # rm /system/app/*.odx
rm /system/app/*.odx
rm failed for /system/app/*.odx, No such file or directory
255|[email protected]:/ # cp /sdcard/deodexed_JAR/* /system/framework/
cp /sdcard/deodexed_JAR/* /system/framework/
[email protected]:/ # rm /system/framwork/*.odex
rm /system/framwork/*.odex
rm failed for /system/framwork/*.odex, No such file or directory
255|[email protected]:/ # mount -o ro,remount /sysyem/ /system/
mount -o ro,remount /sysyem/ /system/
[email protected]:/ # reboot
reboot
and after reboot there is no .odex files in system/app or in system/framework
Please help
My h/s is CANVAS HD i am on Ported rooted canvas 4 rom 4.2.1 JB
Please help............................
imran_inamdar said:
I am getting following errors when running codes
D:\MMX\Deodex\Android>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ su
su
[email protected]:/ # stop
stop
[email protected]:/ # mount -o rw,remount /system/ /system/
mount -o rw,remount /system/ /system/
[email protected]:/ # cp /sdcard/deodexed_apk/* /system/app/
cp /sdcard/deodexed_apk/* /system/app/
[email protected]:/ # rm /system/app/*.odx
rm /system/app/*.odx
rm failed for /system/app/*.odx, No such file or directory
255|[email protected]:/ # rm /system/app/*.odx
rm /system/app/*.odx
rm failed for /system/app/*.odx, No such file or directory
255|[email protected]:/ # cp /sdcard/deodexed_JAR/* /system/framework/
cp /sdcard/deodexed_JAR/* /system/framework/
[email protected]:/ # rm /system/framwork/*.odex
rm /system/framwork/*.odex
rm failed for /system/framwork/*.odex, No such file or directory
255|[email protected]:/ # mount -o ro,remount /sysyem/ /system/
mount -o ro,remount /sysyem/ /system/
[email protected]:/ # reboot
reboot
and after reboot there is no .odex files in system/app or in system/framework
Please help
My h/s is CANVAS HD i am on Ported rooted canvas 4 rom 4.2.1 JB
Please help............................
Click to expand...
Click to collapse
Brother your ported, pre-rooted ROM is already de-odexed.. You don't have to do this all..
Sent from my A116
VatsalRaj said:
my phone stucked in boot loop...
i don't know why....all things went good...
but i saw that after replacing backsmali
the error was there of code.jar
please help me out of this...
Click to expand...
Click to collapse
Re-flash your ROM via SP Flash Tool and do this whole again step to step.. Or use this CUSTOM ROM instead.. This one is just great...
http://forum.xda-developers.com/showthread.php?t=2368306
Sent from my A116
is0l4ted said:
Re-flash your ROM via SP Flash Tool and do this whole again step to step.. Or use this CUSTOM ROM instead.. This one is just great...
http://forum.xda-developers.com/showthread.php?t=2368306
Sent from my A116
Click to expand...
Click to collapse
i tried it twice...bt not working...
i want to do on stock only canvas HD only...
dnt want to go for any custom rom...
plz help..
VatsalRaj said:
i tried it twice...bt not working...
i want to do on stock only canvas HD only...
dnt want to go for any custom rom...
plz help..
Click to expand...
Click to collapse
You may be not doing it correctly.. Can I have a log or image of that error??
is0l4ted said:
You may be not doing it correctly.. Can I have a log or image of that error??
Click to expand...
Click to collapse
i haven't took any...
now i will try once again and send u the image...
bdw thanks for saying...
I'm here for help!!
VatsalRaj said:
i haven't took any...
now i will try once again and send u the image...
bdw thanks for saying...
Click to expand...
Click to collapse
I'm here for help brother.. just keep me posted..
mmx 4.2.1 update
Today i visited mmx service center they said 4.2.1 update is not available and then i called mmx service center and they said because of some lags the update has been taken back. So i m confused tht i shud use this tutorial and update my phone or wait for official update at service center?
i don't want to root my phone and just want to update(official) it.
help
am using rooted cancas hd a116 STOCK JB 4.1.2 can i use De-Odexing in this way
hatemepaps said:
Today i visited mmx service center they said 4.2.1 update is not available and then i called mmx service center and they said because of some lags the update has been taken back. So i m confused tht i shud use this tutorial and update my phone or wait for official update at service center?
i don't want to root my phone and just want to update(official) it.
Click to expand...
Click to collapse
you can update it yourself just follow this threadhttp://forum.xda-developers.com/showthread.php?t=2312557 and if you don't want to root your phone just follow the update part of the thread and ignore the rest.
press the thanks button if I helped:fingers-crossed:
Ryan Dey said:
you can update it yourself just follow this threadhttp://forum.xda-developers.com/showthread.php?t=2312557 and if you don't want to root your phone just follow the update part of the thread and ignore the rest.
press the thanks button if I helped:fingers-crossed:
Click to expand...
Click to collapse
worked thax:good:
Ryan Dey said:
you can update it yourself just follow this threadhttp://forum.xda-developers.com/showthread.php?t=2312557 and if you don't want to root your phone just follow the update part of the thread and ignore the rest.
press the thanks button if I helped:fingers-crossed:
Click to expand...
Click to collapse
upgraded to 4.2.1............thnx man............
Thanxxxx brother!!
Ryan Dey said:
you can update it yourself just follow this threadhttp://forum.xda-developers.com/showthread.php?t=2312557 and if you don't want to root your phone just follow the update part of the thread and ignore the rest.
press the thanks button if I helped:fingers-crossed:
Click to expand...
Click to collapse
Thanxxxx brother!!
No Framework?
Hi there, I'm following your guide to deodex stock JB,
I'm just wondering why theres no files inside the origi_framework. I was able to take the content of the origi_app though.
And whenever i enter 1 into the auto deodex tool, it doesn't do anything.
any thoughts about this?
Thanks !!!
Edit....
I missed a step there that's why.. hmmm...
anyway, i'm still getting nothing when selecting 1 from auto deodex tool.
Will try for future.. Thanks for sharing ts..
Btw, is there anyone aside from ts that had successfully tried and tested?
Sent from my MyPhone A919i Duo using XDA Premium 4 mobile app
lot of thanks....
Related
Hi,
I am trying to alter the boot xml file to get my boot sound back. I am on Modaco 2.5.1 now.
Pulled the boot sound xml file, edited. But when I try push back to phone I get the 'android adb push read-only file system' message.
How do I get round this?
Thanks
Phil
Phil_UK said:
Hi,
I am trying to alter the boot xml file to get my boot sound back. I am on Modaco 2.5.1 now.
Pulled the boot sound xml file, edited. But when I try push back to phone I get the 'android adb push read-only file system' message.
How do I get round this?
Thanks
Phil
Click to expand...
Click to collapse
Do a adb remount before doing the push should solve it.
Thanks
That solved it!
Phil
i'm having the same error when i want to delete stock apps. i'm rooted already, but not sure how to get myself to read write rights. any idea?
Get around read-only
I am having the same problem. Have you had any luck??
woowoowooty said:
I am having the same problem. Have you had any luck??
Click to expand...
Click to collapse
adb remount
"remount failed: Operation not permitted"
you cant do it while in recovery,you have to be booted up.
EXAMPLE to remove Sim Toolkit
adb remount
remount successful
adb shell rm /system/app/Stk.apk
Done...
If you still have problems type adb shell, type su,press allow on your phone screen then try again.
If it shows a $ sign when u type adb shell then u got no root son
................ delete post. ....
sorry but i am quite new to android and rootin... can u please tell me what is recovery and what is boot up.. cause i am facing teh same issue and when i try adb remount from my command prompt, i get permission denied error . Can this also be done from terminal emulator in android.. my device is rooted and i have superuser permission..
thanks in advance,
Rejo
rejo_nazi said:
sorry but i am quite new to android and rootin... can u please tell me what is recovery and what is boot up.. cause i am facing teh same issue and when i try adb remount from my command prompt, i get permission denied error . Can this also be done from terminal emulator in android.. my device is rooted and i have superuser permission..
thanks in advance,
Rejo
Click to expand...
Click to collapse
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
thanks for the information!
Hi.
Samsung Galaxy Ace - FroYo 2.2.1 - Rooted with superuser.
Pulled framework.jar from /system/framework/framework.jar
edited it and now pushing back.
I get
failed to copy 'framework.jar' to '/system/framework/framework.jar': Read-only file system.
I know it's a read-only file system, but I need to push that (and other files) back there.
How to allow that process?
My other option is to "FLASH" a .zip file which contains these files, and I think that puts them in their desired location, but:
What is Flashing and how is it done on my device? I've been googling for a couple hours now with no luck. Adobe Flash is taking all the search results, and some found forum entries aren't helping.
Many thanks, I hope for a quick reply.
Hi, same problem trying to push some libs and framework.jar back to where they originally pulled from. I need to do that for Arabization on Samsung Galaxy Ace running Froyo 2.2.1 with Root.
Error returs "failed: read-only file system"
I've beek googling and searching forums for a couple days now with no luck. Tried many things, commands and chmod which all failed.
The other option, which is to use update.zip on stock recovery to send the files home has failed. Got the following:
Finding update package...
Opening update package...
Installing upate...
E:Error in /sdcard/update.zip (Status 0)
Installation aborted.
I couldn't install ClockworkMod to try it there because Rom Manager does not list my phone (Samsung Galaxy Ace) in the options it gives me when I ask it to Flash ClockworkMod Recovery into my phone. I don't know which phone to choose form the list:
- Huawei Pulse Mini
- Dell Streak
- Huawei Pulse
- Commtiva Z71 (Boston, blaze, and more)
- Geeksphone ONE
- Spice MI700, Commtiva Link N700 and more)
- Huawei Ascend
Halp.
Oh just noticed I have both last posts. How progress works.
By the way,
#mount -o rw,remount /system
does not help. Trying to copy files using 'cp' commant in shell now simply brings 'file exists'. Is there an 'overwrite' attribute to add that'll fix it?
adb remount worked for me thanks..
pigfoot said:
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
Click to expand...
Click to collapse
champagne post. tnx!!!
pigfoot said:
You can try it in terminal emulator after su.
Code:
$ su
# mount -o rw,remount /system
<do what you want>
# mount -o ro,remount /system
Click to expand...
Click to collapse
Worked for me, thank you!
Finally updated the black theme with original android emotions , check out the screenshot , [file uploaded]
Instructions-
I found out a way hw not to brick your phone during this process , go to settings>applications>development>Stay awake (click) , once you screen is on -
*** adb shell
*** su
*** mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
*** busybox cp /sdcard/framework-res.apk /system/framework/framework-res.apk
as soon as you type this your phone reboots without a brick!!
yaaay ive wanted those emoticons for ages!!
Hello,
Thanx for your effort but i couldn't install the theme.when i type down ;
busybox cp /sdcard/framework-res.apk /system/framework/framework-res.apk
and hit the enter key it says "busybox : not found."
I ve already installed titanium backup and busybox together.
What am i doing wrong?
Waiting for your help...
Best Regards.
Erdem
erdemd said:
Hello,
Thanx for your effort but i couldn't install the theme.when i type down ;
busybox cp /sdcard/framework-res.apk /system/framework/framework-res.apk
and hit the enter key it says "busybox : not found."
I ve already installed titanium backup and busybox together.
What am i doing wrong?
Waiting for your help...
Best Regards.
Erdem
Click to expand...
Click to collapse
You have to root your device using 'Exploid' method in the android development thread and install busybox ... busybox via titanium backup doesn't work!
Yeah, you have to copy the "busybox" file from the exploid package to /system/bin, and the busybox from titanium backup wont work...
how to copy busybox to /system/bin ?
i've copy it with
cat /sdcard/busybox > /system/bin/busybox
now i get
"busybox: permission denied"
what am i missing?
Root .......
Sent from my x10 Mini
thanks
great job, it works perfectly on my x10 mini pro with the last firmware.
Lovelly!
Is this done over the last framework-res draco made?
If not, do you mind to update? I think it would be just wonderfull to see them both together!
Thanks in advance,
Regards
Passaralho said:
Lovelly!
Is this done over the last framework-res draco made?
If not, do you mind to update? I think it would be just wonderfull to see them both together!
Thanks in advance,
Regards
Click to expand...
Click to collapse
Added android icons in project evolved by me:
http://forum.xda-developers.com/showthread.php?t=821790
Hello Guyz,
is this theme gonna work on 2.1?
Not sure. Probably will need to be ported into new files grom 2.1 firmware
Sent from my E10i
came here to ask the same question re: 2.1. wouldn't want to brick my fone!
Wont work , will post a new thread with black theme.
Sent from my E10i using Tapatalk
I created script to change framework-res.apk
--New-- Script with safer operation uploaded.
Requirements
-rooted
-busybox installed
1-copy framework-res.apk that you want to replace to the root of your sdcard (make sure it's in root)
2-extract reframe.zip(attachment) to root of your sdcard
in adb shell, use this command:
Code:
su
cd /sdcard
sh reframe.sh
your phone will reboot. and done! your framework-res.apk replaced safely.
Original framework-res.apk backed up as framework-res.apk.orig in /sdcard
Is there any method to get back original framework from SDCard, and paste it to /system, when my phone doesn't want to boot?
hugerth said:
Is there any method to get back original framework from SDCard, and paste it to /system, when my phone doesn't want to boot?
Click to expand...
Click to collapse
Use xrecovery..
Sent from my E15i using XDA App
Can't install... ok... I reflash 1.6 and root it again, install 2.1 and xRecovery for the future...
hugerth said:
Can't install... ok... I reflash 1.6 and root it again, install 2.1 and xRecovery for the future...
Click to expand...
Click to collapse
ops.if you have working rootshell, you can replace it using rootshell. but, since you've go back to 1.6, it doesn't matter. just install xrecovery in the future, quite useful.
Now I have system back (after about 2h) with working xRecovery and... God!.. why I haven't noticed it before...
i wanna ask how to recover the framework-res.apk from the xrecovery??
mount /system and use adb push
edit: new script. revised operation
D:\adb>adb remount
remount failed: Operation not permitted
any help here? I need to replace the framework
nm, forgot to chmod 06777 /system/framework
Thank you for you work. I hope to see this work Just rebooted my phone after applying your script.
propc said:
I created script to change framework-res.apk
--New-- Script with safer operation uploaded.
Requirements
-rooted
-busybox installed
1-copy framework-res.apk that you want to replace to the root of your sdcard (make sure it's in root)
2-extract reframe.zip(attachment) to root of your sdcard
in adb shell, use this command:
Code:
su
cd /sdcard
sh reframe.sh
your phone will reboot. and done! your framework-res.apk replaced safely.
Original framework-res.apk backed up as framework-res.apk.orig in /sdcard
Click to expand...
Click to collapse
Can u tell me where to find the adb shell
Sent from my E15i using XDA App
Use Super One Click, it comes with adb. Copy cmd.exe to SOC folder. Now start cmd, now type 'adb shell' (click enter) and then the other commands.
Sent from my E15i using Tapatalk
you can always change a framework by installer from available theme
mzmz83 said:
Use Super One Click, it comes with adb. Copy cmd.exe to SOC folder. Now start cmd, now type 'adb shell' (click enter) and then the other commands.
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
This is what I see when I open superoneclick t shows Root, shell Root, Unroot, allow non market apps....
Now in superoneclick folder that it comes in when u open it this is what u see
Superuser.apk
Superoneclick
Su
Sqlite3
Regeagainsttecage
Bushels
Addbwinusbapi
Adbwinapi
Ashland
Adblinux
Adb. Application
But when I try to open adb app it does not open a screen comes up then it closes so there is where am stuck at:-( :-( can u help me out from there??????
Sent from my E15i using XDA App
adb won't stay open if you click it, it will just flash out on the screen.
it was supposed to be somekind of a "bridge" for the cmd and the phone...
correct me if i'm wrong please...
You have to copy cmd.exe to the SuperOneClick folder, then you have to open the cmd.exe, not the superonecklick.exe.
I'm trying to replace framework and when I type in shell I got:
cd /sdcard
#
sh reframe.sh
sh: Can't open reframe.sh
#
oubsty, Thanks you
Boshe said:
I'm trying to replace framework and when I type in shell I got:
cd /sdcard
#
sh reframe.sh
sh: Can't open reframe.sh
#
Click to expand...
Click to collapse
I think it works if your phone is charged by your laptop/computer only. You do not allow it to connect. I mean you can not reach SDCard through Total Commander, etc. only charging.
Help
# sh reframe.sh
sh reframe.sh
sh: Cannot open reframe.sh
#
any ideas
got SuperOneClick 1.5.5 ( busybox )
root explorer ( only thing in superuser )
SE's PC companion running in background [ keeps asking for mount, but is ignored ]
got Android full SDK installed - drivers, ADB, 'the works'
root'd succesfully -(( WORLD-1-8_2.0.1.A.0.47 )) White-DarkBlue / Pink
4Gb Kingston HC4 sdc4/4gb 18 - un partitioned.
I wish to remove some bloat, and change to a custom theme.
{EDIT} - how to access recovery mode?, got customization = home-back-back-home-back-home-home-back
Dalvik Debug Monitor won't run, adb error2
thanks in advance.
prejudice I have noticed that since version 1.5 I do not have all the permissions of root, after having installed the system with :
./adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
./adb push framework-res.apk /system/framework/framework-res.apk
I have been informed that I do not have permission, I also tried to install the original firmware, making the root of this (and everything is fine) and install Paranoid Android 1.6a (I have no permission). please can you help me? Thanks to all
massinegro204 said:
prejudice I have noticed that since version 1.5 I do not have all the permissions of root, after having installed the system with :
./adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
./adb push framework-res.apk /system/framework/framework-res.apk
I have been informed that I do not have permission, I also tried to install the original firmware, making the root of this (and everything is fine) and install Paranoid Android 1.6a (I have no permission). please can you help me? Thanks to all
Click to expand...
Click to collapse
have u check your device with ROOT CHECKER https://play.google.com/store/apps/...GwsMSwxLDEsImNvbS5qb2V5a3JpbS5yb290Y2hlY2siXQ.. before u install Paranoid Android Rom??
Hit thanks if i helped you friend
Try "adb remount" before trying to push file into /system
If the command come back with error, you will need adbd insecure. Normally custom kernel would have include it, but for stock kernel it was not included.
There is an app made by chainfire to enable this feature, you can find it here. Enable USB debugging on your phone, patch it.
For all Dev's,
After days of searching for a way to deodex my stock XMP stock ics to flash the nice MOD's
didn't find any way easyer and better than this one aimd to galaxy samsungs
so i've download the attached file and checked it and found nothing says its for galaxy only so i ask the great Dev's here to take alook at it and find or even
test it so if it worked for us would be an easy pr to do this long lines and commands for us new users
and in the tut its like this
"For ICS Roms, the process is quite easy. (Thanks and Credits to jaydvn.)
Download the attached zip file.
Extract it on your windows PC.
Copy your /system/app to _app folder
Copy your /system/framework to _framework folder.
Run AutoDEOToolMain.bat
Follow the instructions.
deodexed jars and apks will be found in deodexed_APK and deodexed_JAR.
Push deodexed app and framework to device:
Connect your device to PC in USB debugging mode.
Copy deodexed_APK and deodexed_JAR folders to root of sdcard (/sdcard).
Open Windows command prompt and type the below commands.
Code:
adb shell
su
stop
mount -o remount,rw /dev/block/mmcblk0p9 /system
rm /system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/deodexed_APK/* /system/app/
busybox cp /sdcard/deodexed_JAR/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/mmcblk0p9 /system
sync
reboot recovery
In Recovery, Wipe Cache and Wipe Data/Factory reset.
Reboot.
Done. "
endof"ing.
caution
: the above tut, is for some galaxy it might not work on our devices
and took from the fowloing linked thread by: superatmos thanks for Him
http://forum.xda-developers.com/showthread.php?t=1587482
again our dev's PLZ make it work for us
and I'm willing to try it my self on my phone
just waiting for the green light
big thanks in advance for all of you.
and the credit goes to the creater of this great MOD.
Forgive my lame inglish and be easy on me this is my 1st real thread.
and if the post doesn't look good that is because I'm blind and using a screen reader and can't realy look at it..
chears.
dark4m said:
and I'm willing to try it my self on my phone
Click to expand...
Click to collapse
Great, let us know how you get on. deodex stock rom
dark4m said:
For all Dev's,
After days of searching for a way to deodex my stock XMP stock ics to flash the nice MOD's
didn't find any way easyer and better than this one aimd to galaxy samsungs
so i've download the attached file and checked it and found nothing says its for galaxy only so i ask the great Dev's here to take alook at it and find or even
test it so if it worked for us would be an easy pr to do this long lines and commands for us new users
and in the tut its like this
"For ICS Roms, the process is quite easy. (Thanks and Credits to jaydvn.)
Download the attached zip file.
Extract it on your windows PC.
Copy your /system/app to _app folder
Copy your /system/framework to _framework folder.
Run AutoDEOToolMain.bat
Follow the instructions.
deodexed jars and apks will be found in deodexed_APK and deodexed_JAR.
Push deodexed app and framework to device:
Connect your device to PC in USB debugging mode.
Copy deodexed_APK and deodexed_JAR folders to root of sdcard (/sdcard).
Open Windows command prompt and type the below commands.
Code:
adb shell
su
stop
mount -o remount,rw /dev/block/mmcblk0p9 /system
rm /system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/deodexed_APK/* /system/app/
busybox cp /sdcard/deodexed_JAR/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/mmcblk0p9 /system
sync
reboot recovery
In Recovery, Wipe Cache and Wipe Data/Factory reset.
Reboot.
Done. "
endof"ing.
caution
: the above tut, is for some galaxy it might not work on our devices
and took from the fowloing linked thread by: superatmos thanks for Him
http://forum.xda-developers.com/showthread.php?t=1587482
again our dev's PLZ make it work for us
and I'm willing to try it my self on my phone
just waiting for the green light
big thanks in advance for all of you.
and the credit goes to the creater of this great MOD.
Forgive my lame inglish and be easy on me this is my 1st real thread.
and if the post doesn't look good that is because I'm blind and using a screen reader and can't realy look at it..
chears.
Click to expand...
Click to collapse
This is actually not that bad looking a post. Well done!
Wouldn't you still need to delete the odex files from your rom?
Sent from my SK17i using xda premium
1st,
Thanks alot for replying
& yes I'll see how to delete them odex files in other tut or thread or if did'nt find it will ask how to
but the way the galaxy devs did it looks good and easy to use for me
since it needs sited help and i like to do such things my self if possible.