Hi,
I have a problem making JB ROM to work on my Neo V. My situation is like this:
I have an MT11i with unlocked bootloader. I was trying to install MIUI v5 with Fusion Kernel v5.5 (latest version i believe). The installation finished without any problem. But after the first boot, my touchscreen doesn't work. I can't even select anything on the screen. It's not responding. Only buttons such as back, home, menu, vol up, vol down, power and camera does work, nothing more.
Here's how i do it :
1. Flash stock FTF,
2. Flash stock FTF again - without kernel and baseband (as suggested in http://forum.xda-developers.com/showthread.php?t=2273017&page=16 comment #155)
3. I flashed Fusion Kernel v5.5 (http://forum.xda-developers.com/showthread.php?t=1926299)
4. Rebooted into CWM and installed the MIUI v5 3.6.21_v2
5. Finished installation, reboot into system
6. Stuck at MIUI Welcome Screen
I know this question has been asked elsewhere in the forum. I did searched for it. But i didn't found any thread that had this problem solved. FYI, i also have tried every JB kernels that i know (LuPUS, Fusion, TWRP and so on) but always got the same result.
My touchscreen works flawlessly if im using any ICS based rom. But not JB rom.
Does anyone had any idea what caused this? Can i still have the chance to install JB into my phone?
You seem to be the only one with this problem. Could it be you have a hardware issue?
neo668 said:
You seem to be the only one with this problem.
Click to expand...
Click to collapse
Not just me, 2 of my friend, using the same model also facing the same issue.
neo668 said:
Could it be you have a hardware issue?
Click to expand...
Click to collapse
I am not sure if it is hardware issue. But why it would work without problem on ICS kernel and rom? I will try to get the logcat of it, though i think it would be difficult without being able to enable usb debugging on the MT11i.
Sent from my Nexus 4 using xda app-developers app
Just now, i was able to pull the logcat output for several moments on the phone. Also, i have used AndroidSystemInfo hardware listing. But i am so new with reading the logcat file.
I have attached both file. See if someone could help me find out the cause.
I ended up using xperia ultimate HD rom 3.0.2 with Holo launcher. Turn up it did pretty well. Feels like JB though. Mybe i'll continue with the problem some other time. For now ill just be fine with this rom. Thanks anyway guys.
Sent from my Nexus 4 using xda app-developers app
Related
[Q] I really need some expert help on this guys!
<b>2012-03-23 updates on what further tests I've done:</b>
I've just flashed MT15i-Global.tft using latest flashtool in flashmode.
= did not work
Then tried wotanclient = did not work
Made fresh install of ICS beta(2different roms) = did not work
Please help me get my front cam working !
A few months ago the front Camera worked on my Neo but not anymore.
I cant really say if it just stopped working or had something to with flash of another rom.
I've rooted and flashed a number of phones before so i have some basics in this..
Currently running ICS on my Neo.
What I've tried to do to fix it.
1. Use SEUS but it said I have a modified android version and would let me restore...
2. WotanClient which restored it to .62 2.3.4. Failed at first attempt but succeeded at 2nd. >> front cam didnt work afterwards.
3. Tried other ICS roms and made several attempts.
The steps i took on installing another rom:
- installed fastboot
- connected phone
- run fastboot flash boot xxxx.img
- go into recovery
- wipe all, wipe cache, format system, dalvik and battery stats
- install xxx.zip
- up and running with non working front cam
Questions!:
1. How can I make a TOTAL restore of both bootloader, kernel, rom and everything to the stock firmware it got shipped with????? A step by step would be appreciated!
2. Any steps that I could have missed??
3. Anyone with similar problems?
4. How can I put it back to 100% stockrom to get warranty back and perhaps send on service?
FYI
The back camera also behaves strange on the ICS rom in skype/tango video call. It is miscolored.. On 2.3.4 it was ok.
Weird. Could this all be a firmware issue?
Can some provide all the tools i need to get it working? Or can I extract some logs or something that would help you find out if the front cam really is broken??
Where can I test the front cam or are there any appa to specifically test it in any way??
Desperate regards !
F on my mobile
Sounds like you have flashed a arc Rom
Or messed with android from facing camera.xml
Sent from my MT15i using Tapatalk 2 Beta-2
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
kormatoes said:
Sounds like you have flashed a arc Rom
Or messed with android from facing camera.xml
Sent from my MT15i using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Im pretty sure it was a neo rom, it was picked from neos forum anyway.
Nope, havent messed with it at any point nor any other file.
sdk16420 said:
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
Click to expand...
Click to collapse
Ill give it a shot but i dont think it will help as after WotanClient and back to android 2.3.4 it wasnt working either.
nfreddi said:
Im pretty sure it was a neo rom, it was picked from neos forum anyway.
Nope, havent messed with it at any point nor any other file.
Click to expand...
Click to collapse
That's my point not many ics Rom actually come from neo all arc and neo v flash the patch above bro let us know
Sent from my MT15i using Tapatalk 2 Beta-2
Other suggestions or thoughts?
nfreddi said:
Other suggestions or thoughts?
Click to expand...
Click to collapse
If it doesn't work after flashing official 2.3.4 firmware in flashtool with a full wipe, I'm out of ideas.
Does flashing with wotanclient really flash Everything?? Kernel, loader rom and wipes everything?? If the phone hasnt got a hardware fault something, it must be some step i did that sctewed something up.. Could try wotan again though but would rather have more people look into this before strarting flashing.
Afaik Wotan flashes / wipes everything and gets you back to clean Stock!
BUT, i already got problems wotan flashing / discovering the wrong phone type.
While i was trying out some different Kernels on my Phone (Mt11i SE NEO V), it seems that i picked a wrong Kernel and my Phone was showing me the Model Mt15i (SE NEO).
And even Wotanclient discovered a Mt15i...
Didn´t try the front camera at this point, but back cam was not working.
I tried to manually flash Mt11i Stock Rom/ Kernel (0.62) using flashtool.
Well flashtool did it´s work not completely, but far enough to reset the Model to Mt11i and Wotan flashed the correct Version afterwards.
My Hint, have a look at the Modellnumber in Settings, is it the right one ?
sdk16420 said:
If you're still on ICS, try to flash the camera fix zip again. http://forum.xda-developers.com/showthread.php?t=1514172
Click to expand...
Click to collapse
Just tried the Camera fix. Cant find anywhere to switch to front cam. Didnt help...
leine0104 said:
Afaik Wotan flashes / wipes everything and gets you back to clean Stock!
BUT, i already got problems wotan flashing / discovering the wrong phone type.
While i was trying out some different Kernels on my Phone (Mt11i SE NEO V), it seems that i picked a wrong Kernel and my Phone was showing me the Model Mt15i (SE NEO).
And even Wotanclient discovered a Mt15i...
Didn´t try the front camera at this point, but back cam was not working.
I tried to manually flash Mt11i Stock Rom/ Kernel (0.62) using flashtool.
Well flashtool did it´s work not completely, but far enough to reset the Model to Mt11i and Wotan flashed the correct Version afterwards.
My Hint, have a look at the Modellnumber in Settings, is it the right one ?
Click to expand...
Click to collapse
It is MT15i according to system information.
After a few more replies or tips here ill try to reset with flashtool / wotan.
Hi, I am facing the same front camera issue after upgrading to ICS.. No on seems to be able to sort this out..
and1only said:
Hi, I am facing the same front camera issue after upgrading to ICS.. No on seems to be able to sort this out..
Click to expand...
Click to collapse
Hi, What have you tried?
It feels like I've tried everything.. I can't just have bricked my phone? =)
Do you know if it's possible to Re-Lock the phone to be able to send it on SE service repair???
WE REALLY NEED SOMEONE TO HELP US OUT ON THIS! "shouting"
I disassemble and assemble the phone flex and it worked http://forum.xda-developers.com/images/icons/icon7.gif
im also facing the same issue..but on the neo v though
the issue persisted before i rooted my phone and after i switched to the stock ics from gingerbread
now im using cm9 and the face unlock feature doesnt work
still havent got the issue sorted
front camera solution
Hello and sorry for continuing this thread, but i have a query about the front camera of xperia neo v.
As all the above, I have the same problem with my front camera and I was wondering if I could somehow get the camera's apk file from gingerbread (the whole camera application - which is believed to be the last application compatible with the camera),would this solve the problem?
I am addressing aspecially to the developers .....
If anybody knows a way to solve this, please send me inbox a guideline.
Thanks in advance.
:good:
May be below the info can help you about the stock rom flash
1. Find the bootloader locker ftf (firmware file) file for Neo from the Internet (else inbox me I will find and will give you. I have that file but it's Neo V only). Once you flashed this file then Sony updater service will reconognize your device and do the update properly
2. Install Sony updater service
3. Connect your phone and choose the phone model then update to ICS
Hit thanks if it helped
Sent from my Xperia Neo V using xda app-developers app
Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)
Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Maximo22 said:
Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Click to expand...
Click to collapse
Try Changer your Baseband.
Maximo22 said:
Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Click to expand...
Click to collapse
Maybe change your wlan to b/g and not b/g/n, that had solved it for me
Had your bootloader unlocked? What kernel are you using?
Sent from my smultron using xda app-developers app
eltonpestana: Is it possible to change the baseband in this phone?
mihahn: My WiFi is already in b/g mode /:
gouthamthemostwanted: My bootloader doesn't allow unlocking, so I am using the stock Kernel -.-
If you are using the stock kernel are you sure you flash ics kernel prior flashing the ics Rom?
If you flash ics kernel.sin using flashtool and still experience problems on WiFi then go through the updater-script of the Rom and make sure permissions are set right and this symlink is present
symlink("/data/etc/wifi/wl1271-nvs.bin","/system/etc/firmware/ti-connectivity/wl1271-nvs.bin");
I use rage kernel and removing this symlink from updater-script made my WiFi not to work . I don't know whether will it work with stock ics kernel but it's worth a shot.
Sent from my smultron using xda app-developers app
Ok, I'll be honest with you. I don't know what the updater-script is, and I never tried to flash a kernel because my bootloader is still locked
I think the problem is on your router. Change the channel and mode and also disable the wireless security. See what happen......
Sent from my ST15i using xda premium
To flash the stock Sony kernel you don't need a unlocked bootloader . If you don't flash ics kernel for ics Rom I'm sure it won't work properly. I won't even boot properly in the first place.
Below is the stock ics firmware for st15i
http://www.mediafire.com/?wot47vumhstlc4h
Flash the above mentioned ics firmware using flashtool before flashing any ics Rom.
I hope you know what a flashtool is and how to flash your device using it.
Sent from my smultron using xda app-developers app
Flash back on gingerbread and see if wifi is working well. If yes, you know it's not related to your router.
It's a known problem on ics by sony that wifi isn't working well, but there's no working fix as far as I know...
Sent from my SK17i running Jelly Bean via CM10
gouthamthemostwanted said:
To flash the stock Sony kernel you don't need a unlocked bootloader . If you don't flash ics kernel for ics Rom I'm sure it won't work properly. I won't even boot properly in the first place.
Below is the stock ics firmware for st15i
http://www.mediafire.com/?wot47vumhstlc4h
Flash the above mentioned ics firmware using flashtool before flashing any ics Rom.
I hope you know what a flashtool is and how to flash your device using it.
Sent from my smultron using xda app-developers app
Click to expand...
Click to collapse
Yeah... I know what flashtool is, I have used it too many times. But I never heard about flashing the stock kernel, I thought the kernel was automatically updated when you install the ICS tft. I'll try it anyway.
mihahn said:
Flash back on gingerbread and see if wifi is working well. If yes, you know it's not related to your router.
It's a known problem on ics by sony that wifi isn't working well, but there's no working fix as far as I know...
Sent from my SK17i running Jelly Bean via CM10
Click to expand...
Click to collapse
Actually, as I said, in GB I never had that problem, and I don't know what to do yet.
Maybe this can help...
Here are the updater-script files of the ROM's that I have recently used.
If there's something incompatible with my phone or if there's something I can do with them to fix the problem, I'd be glad to know it
I'll let you know man . I'll go through them . It's 12 in the morning here
Sent from my smultron
Haha it's ok, take your time. Thank you
I just skimmed through both the updater-scripts and I don't find anything wrong there. What ftf file you used for ics? Is it regional customization or world customization?
Sent from my smultron
About the real ics r6 you may want to take a look at this post
http://forum.xda-developers.com/showthread.php?t=1914645
flash the above zip after flashing real ics r6 and tell me if that worked
HIT THANKS IF I HAVE HELPED YOU
sent from my smultron
---------- Post added at 07:12 AM ---------- Previous post was at 06:49 AM ----------
And mark this thread solved [by editing the first post's subject by changing [Q] to [SOLVED] ). Post your solution here. It may be very useful for members searching the forum for the same reason.
hit thanks if I've helped!
sent from my smultron
(Sorry for my english) Hi folks, I have a problem... using the search button I saw many threads talkin' about touchscreen's problems.
I tried with the many solutions over there, but my problem is different.
I installed the Legacy Xperia 4.3 Rom, after that, my phone starts to have problems with the touch.
When I used the sliding qwerty keyboard, touch doesn't work, but when I used my phone in vertical mode, it works for a couple of seconds.
Then, I remove the Rom and I used the 4.2.2 Rom from Legacy Xperia.
The touchscreen doesn't work even in the recovery menu. At first I thought that it was a hardware problem, but when I replace my touchscreen the problem still doesn't fix. I noticed another thing. I can't flash >4.1 kernels anymore. I tried to flash the same 4.3 kernel that bricked my touch and my phone doesn't boot at all. With another kernel, my phone turns on properly. Please, help me... :crying:
Kafei said:
(Sorry for my english) Hi folks, I have a problem... using the search button I saw many threads talkin' about touchscreen's problems.
I tried with the many solutions over there, but my problem is different.
I installed the Legacy Xperia 4.3 Rom, after that, my phone starts to have problems with the touch.
When I used the sliding qwerty keyboard, touch doesn't work, but when I used my phone in vertical mode, it works for a couple of seconds.
Then, I remove the Rom and I used the 4.2.2 Rom from Legacy Xperia.
The touchscreen doesn't work even in the recovery menu. At first I thought that it was a hardware problem, but when I replace my touchscreen the problem still doesn't fix. I noticed another thing. I can't flash >4.1 kernels anymore. I tried to flash the same 4.3 kernel that bricked my touch and my phone doesn't boot at all. With another kernel, my phone turns on properly. Please, help me... :crying:
Click to expand...
Click to collapse
Have you tried flashing stock ICS .ftf file?
Grof87 said:
Have you tried flashing stock ICS .ftf file?
Click to expand...
Click to collapse
Yes... I tried many solutions, like Aroma method, Active ROM method, flash stock ics rom metod, but nothing changed. I think that my problem must be a software problem because now I can't flash any >4.1 kernel.
Kafei said:
Yes... I tried many solutions, like Aroma method, Active ROM method, flash stock ics rom metod, but nothing changed. I think that my problem must be a software problem because now I can't flash any >4.1 kernel.
Click to expand...
Click to collapse
Try flashing the following combination :
Lupus Jb v7 kernel (link : http://goo.im/devs/wedgess/LuPuS-MPDI-Kernels/JB/mango)
Hepta Error Rom (link :http://forum.xda-developers.com/showthread.php?t=2336571)
I swear mini pro feels like its possessed or something (generally speaking )
For me, the LegacyXperia ROM and its kernel always gave problems with touch and my right soft key would go haywire. The only stable combination that worked for me is the one I posted above. Try it, and see if it helps!
Hey there.
it seems i have a big problem.
i just bought a new XU and first everything was fine...
i unlocked the bootoader and tried some roms... until i found one that was not working.
the instructions said i have to slash 4.0.4 stock... so i did...
since then rearly every rom (even the stock roms) arent responding to any touch.
there is a rom which i can flash that is responding... but for now its only one rom!
in recovery everything is fine its just the rom itself that seems to make problems...
what can i do?
even if i flash to stock the touch display is not working....
I have the same problem!
ManCloud said:
Hey there.
it seems i have a big problem.
i just bought a new XU and first everything was fine...
i unlocked the bootoader and tried some roms... until i found one that was not working.
the instructions said i have to slash 4.0.4 stock... so i did...
since then rearly every rom (even the stock roms) arent responding to any touch.
there is a rom which i can flash that is responding... but for now its only one rom!
in recovery everything is fine its just the rom itself that seems to make problems...
what can i do?
even if i flash to stock the touch display is not working....
Click to expand...
Click to collapse
may be it is due to the hardware problem, u can test touch screen by typing *#*#7378423#*#* in your dialler!!!
or try flashing stock gingerbread via flashtool, it may help.
press thanks if i helped
The screen is working...
but only with this Rom http://forum.xda-developers.com/showthread.php?t=1974430 and in recovery.
None of the FTF-stock roms is working for me.
I think it may be a driver error...
but etc/hw_config.sh is identic so no error here...
toch screen test is also passed...
There is no problem with the mentioned rom i.e. that network isnt working...
Hope someone can help
I too have the same problem sometimes..... I think it is the problem with the kernel
Sent from my ST25i using xda premium
Same kernel, same base rom... one is working the other one dont...
compaired roms: st25i_6.1.1.b.1.100 generic - user_sony - Ultimate Z1
EDIT: i had some success... it seems that the problem is somewhere in the update-script... i copied the whole META-INF folder from the generic over the ultimate Z1 folder... and the touch worked! almost everything else didn't but this is a small success i think....