Related
I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.
Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O
markols said:
I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.
Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O
Click to expand...
Click to collapse
In CWM, you need to install from .zip files. It sound like you're trying to install .img.
Thanks... I was installing .zip files, not .img. I was pretty useless last night. I used Alberts 4_5SD recovery this morn and got it rooted to 9.9.9 and I had superuser and titanium backup so all was good. I ran NWM from internal on the tablet and told it to install ROM from the SD card. I pointed to the file and told it to backup, then install the new ROM it said an error had occured when I tried this. I then booted from another SD card to go to CWM and after the white screen with the box, it went into backup and then restored the ROM, however it took me back to a unrooted version. It looked for the ROM I wanted to load but that was on the other SD card. Now I am back at square one, frustrated...
I think I might have found the problem but I am not sure. When I was doing the original CM7 update I wrote CWM to the E drive, (MyNook) so now the drive reports a total size of .99GB with 433MB free. So CWM is installed on this drive and I think that is the proplem. Is there a way to get CWM off the E drive? If I can just uninstall it, will that be sufficient enough to get the root back and then correctly install CM7? Thanks again in advance.
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.
This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.
If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
markols said:
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.
This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.
If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
Click to expand...
Click to collapse
The steps that you have listed in this post are correct. If you do this exactly, everything should go according to plan.
Indirect's great app installs CWM to the recovery partition of your device, overwriting the B&N stock recovery. You can always go back to stock recovery if need be, though, so don't worry.
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
markols said:
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
Click to expand...
Click to collapse
No problem. Glad to hear your wife's happy again!
installaton aborted while installing clockmodrecovery
hii i am sagar
i want solution to this problem any body have solution means please reply
i am using micromax mad a94
when i am trying to install clockworkmod on my phone it always show like these
install/sdcard.....
finding update package......
opening update package.....
verifying update package....
installation aborted........
anybody have solution to this problem
please tell me
thank you
Did u solve it yet?
Sent from my iPod touch using Tapatalk
[See post http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123 for the new version of this post with updated links/pointers to Succulent's recent CM10.1 builds as well as CWM/TWRP recovery tool compilation].
[Caveat emptor: adopt/follow this guide at your own risk].
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
FWIW, here the process I used to install CM10 internally on my 16GB Nook Tablet (i.e., on its emmc).
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows. If you are going to use this card for backing up your NT, keep in mind that each backup will require at least 600MB (for a barebone stock or CM config) and size the partition accordingly.
Obtain and copy to the SD card the following files:
MLO, u-boot.bin, and flashing_boot.img in SD_boot.zip obtained from http://iamafanof.wordpress.com/2012/11/11/how-to-guide-bootable-cm7cm9cm10-sdcard-for-nook-tablet/
either one of the two recovery program image files: cwm_6012_sd.img (ClockworkMod Recovery (aka CWM)) in CM9-10_CWM_v6.0.1.2_8-16gb_tools_sdcard.zip, or twrp_2220_sd.img (TeamWin Recovery Project (aka TWRP)) in CM9-10_TWRP_v2.2.2.0_8-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958, rename it to recovery.img. If you want to try out (or use) both, name your alternate choice altboot.img.
the file cm-10-yyyymmdd-UNOFFICIAL-acclaim.zip from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
the file gapps-jb-20121011-signed.zip from http://goo.im/gapps/gapps-jb-20121011-signed.zip
Put the SD card into the NT, and boot from its power off by inserting a powered USB cable. Press and hold the N button as soon as CyanoBoot comes up to get the boot menu to display.
Select either SDC Recovery (or Alternate Boot depending on which recovery tool you want to use).
Select Backup to backup your current NT config (/boot, /recovery, /system, and /data). Before proceeding to next step, see note (ii) near the end of this post.
Select Wipe data & factory reset.
Select install zip from SD card and install cm-10 zip file.
Select install zip from SD card and install gapps zip file.
Select power of and remove SD card from NT and power NT on again using the power button (alternatively you can just remove SD card and select reboot).
Once the NT boots up, set up the wifi connectivity and your google account info. If you had previously used Google backup service your apps will be auto-downloaded (but their settings will not be auto-restored)
A few additional points worth noting:
Installing CM10 ROM and gapps will override your NT's BN-provided boot, recovery, ROM, and Apps, so make sure that you backup all this stuff using backup process in step #5 above, safekeep the backup data on your PC/Laptop and better yet archive it on CD/DVD. Your media files in the NT media partition BN allocates for user should be intact.
To play it safe you should do the above in 2 phases: steps 1 through 5, then exit recovery and remove and mount SD card on PC to verify that backup data got newly created; then insert SD card and continue steps 6 through 9.
CWM and TWRP use different backup archive formats, so keep this in mind if you decide to switch. Furthermore, CWM has changed its archive format going from release 5.x to 6.x, so I think it would be prudent to save a copy of the recovery program together with the backup data it generated. (FWIW I prefer the tar/zip compatible backup data structure TWRP uses (which CWM 5.x had also used) over the BLOb structure which CWM 6.x use -- but YMMV).
To restore from backup data, boot into SD card and select from boot menu the same recovery program that was used to create the backup data, then select the particular backup dataset (indexed by date/time) you want to reinstall on your NT.
I would advise against blindly using other functions of the CWM and TWRP without looking up info and researching to understand what they really do.
See my post at http://forum.xda-developers.com/showthread.php?p=48612997#post48612997 for more "Info and Tips for Mitigating Risks in Rooting and Flashing Custom-ROM".
My thanks to all the developers who collective work created this wonderful ROM as well as the tools and info I made use of to install it. IMHO this ROM helps make the Nook Tablet one of the best-value tablets for the money (at least at the moment).
great post...fwiw here's my experience to get two NT16's up and running (I started with an old CM7 on both of them).
Backup nook with titanium backup on existing 32GB card.
Take screenshots for replacements
Reset nook to stock (1.4.2) and update to latest (1.4.3) with a fresh SD Card with repart.img copied to root (my red 2GB card):
http://raywaldo.com/2012/06/make-unbrick-repartition-image/
http://www.youtube.com/watch?v=Nu6e4m62tFc
c. 1.4.3 can be downloaded from B&N site directly. (http://www.barnesandnoble.com/u/Software-Updates-NOOK-Tablet/379003187/)
Create a CWM SD Card (ideally 4GB SanDisk) as per these instructions - http://raywaldo.com/2012/05/root-nook-tablet-with-cwm-sdcard/
Copy CM7 BETA and compatible GAPPS onto this card or another blank one. You can get the files from here: http://forum.xda-developers.com/showthread.php?t=1481826 and http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Boot into this CWM Card, wipe data/wipe cache and dalvik cache. Install zip from sdcard (either current or pop in the new one). Choose cm-7 beta first, then gapps. Remove sd card. Reboot. Wait a while for it to set itself up.
Go into settings/applications and clear the cache for google market/play.
You now have CM7 installed and can setup the basics (google, wifi etc..)
Insert your 32GB (or 16 or 8 or whatever) Sandisk SD Card (it should ideally have the Titanium Backup folder from step 1, any media you want in Music and Movies folder and the CM10 and gapps zip in the downloads folder -- and that's it!)
Once mounted, download Goo Manager from the google play store and run it, accepting superuser requests.
Choose settings menu and "Install OpenRecoveryScript" and it should install openrecovery twrp recovery manager. Once it has installed and informed you of success, reboot into recovery (this is important), upon reboot hold the "n" and choose internal emmc recovery from the menu.
You will now find yourself in TWRP. From the install menu, add the CM10 PURE AOSP 4.1.2 JBV06.1-Hashcode and then the gapps-jb-20121011-signed.zip and swipe to confirm flash. This is it. Fingers Crossed!
NOTE: On one NT 16 (I have two), step 12 DID NOT WORK. It wouldn't install the CM10...zip -- and simply rebooted itself or hung...so I powered off, and rebooted to the CWM Card in #6..and used CWM to wipe caches etc… and then installed the two zips...and voila.
hope it helps.
digixmax said:
I've been running CM10 build by XDA Developer Succulent version 12/08 on SD card since its release ten days ago, and its reliable/stable performance has crossed the threshold for me to finally take the plunge and install it internally on emmc.
Click to expand...
Click to collapse
How do you feel about it now that you've installed it internally? I took the plunge as well today, but I'm not sure it's runs any better internally than it does from the sd card. Having said that, it runs so incredibly well from the card, so it's really hard to beat, but still... I'm actually having more issues with the internal install than the sd version.
I had had enough of the stock reader (that I'm actually pretty fond of) not remembering my place in sideloaded books, so I didn't feel I had anything to loose and am glad I made the install though. Installed once makes it easier to reinstall when an even better build comes along.
I made the switch since the stock ROM was so barebone and clumsy I virtually never use it since I had the NT, and the rooted stock ROM is just marginally better -- I found out there are so many apps I 've been using on CM10 that are simply not available for BN's (Android) Gingerbread. I also like the fact that I can now reboot (if ever needed) untethered.
I think performance-wise it runs about the same as it was running on SD, if it's better then it's not yet noticeable.
What kind of issues are you having with your new setup?
Some apps misbehaved. Didn't install properly or gave error messages. I decided to re flash and this this second install hasn't had any issues at all. Same files from the same card.
It is nice to have it internally and be able to switch sd cards should I want to.
Sent from my Barnes & Noble Nook Tablet using Tapatalk 2 and SwiftKey
I ran into a problem with v12/08: when I connect the NT to the PC I do not get the “USB connected” notification with option to “turn on the USB storage”, and thus cannot access neither the emmc media partition nor the sdcard. The problem exists with both CM10 running on emmc and running on sdcard. Furthermore when running on sdcard, hitting “storage” in “settings” results in a force-close of “settings”.
I am curious if anyone else has the same problem, or I am just missing some setup setting somewhere.
In the meantime, I am back to running another ROM off SD.
Those storage setting issue I had with the 1118 build but not with later ones. Connection to PC work fine but I don't think I need to do the turn on USB thing. No PC nearby at the moment
Edit: I am now near a PC, and I do get the "touch to turn on USB" or words to that effect. So it works as it should..
Sent from my Nook Tablet using Tapatalk 2 and SwiftKey
Thanks, I've tried reinstalling a couple of times (as well as installing a different ROM) without success.
I found the answer to my problem: I was used to getting the full-screen alert “USB mass storage” (upon insertion of tethered USB cable), and didn’t notice the tiny alert “USB connected” on the status bar (which when pulled down would in turn launch the “USB mass storage” alert).
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
Question: I'm not new to rooting and flashing, but am new to NT. I rooted my wifes NT, installed a launcher to switch back and forth, and loaded a few apps. I did not change the stock recovery and used a boot sdcard to run an older version of CWM. I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Cm7 is a gingerbread rom, it can be flashed by cwm 5 and 6 both. But cm10 is jellybean and must be flashed with cwm 6 only (or twrp) . And once you have cm7, you get cyanoboot (2nd bootloader) which is necessary to load cwm6, whether its internally flashed recovery or SD card recovery.
If you still have your bootable SD card, boot into recovery and check the version (cwm 5 most likely) , then do the longer, but simpler method - stock > cm7 > flash cwm6 internal and boot into it from cyanoboot > cm10.
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Sent from my SAMSUNG-SGH-I317 using xda premium
Dean1650 said:
...
I forgot to hack OTA off so while messing around the darn thing upgraded to 1.4.3. The stock rom is such an old version of GB it is really worthless. So here is my question. Can I use this method to go directly to CM10? Im not too concerned about the issues mentioned in this thread, but more concerned about the method and the type of issues I might encounter. I see some threads say to flash CM 7 first, why I'm not sure. It almost looks to simple. Just looking for confidence. If it were mine I wouldnt care. Thanks for any help.
Click to expand...
Click to collapse
Yes, you can use this process to go directly from stock or rooted stock to CM10 -- I used it to go from rooted 1.4.3 directly to CM10. With SD-based flash, there is no need to go the circuitous multi-stage flashing process.
And if you use Succulent's CM10 builds from http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/ his ROM zip files all include emmc recovery so you don't even have to separately flash recovery as you would have with other ROMs. I think his approach, in addition to being convenient, has the benefit of avoiding intermediate states where there is potential incompatibility between ROM and recovery versions (which I think is conducive to causing bootloop).
Of course if for some reason you later prefer a different version of recovery than the one he includes (CWM 6.0.2.5) you can always reflash your particular choice of recovery by itself.
FWIW I am running Succulent's cm-10-20121225-acclaim-HD.zip (GCC 4.6) at the moment and it works great.
Dean1650 said:
I see the difference between the 2 methods..a few more questions. I dont see where or how recovery gets flashed in the first method. Looks like either/both are used but not flashed. In both methods, I dont see any sdcard additional partition requirements so can I assume everything can get copied to the boot partition? Haven't looked at the card I made yet, but if CWM is current enough for CM7 it should work fine. I appreciate this thread. It has cleared up a lot of questions.
Click to expand...
Click to collapse
Everything that gets flashed via recovery (either CWM or TWRP) comes in zip archive form, and this applies to ROM, gapps, as well as recovery itself. (If you ever want to flash recovery, the simplest way is to get a recovery zip file, such as one of those with keyword emmc from http://forum.xda-developers.com/showthread.php?t=1640958, and flash it from SD using the process in the first post, just as you would flash a ROM build or gapps).
If you are curious about what gets installed and where, just open (but don't extract) the to-be-flashed zip file (e.g., using winrar/winzip/7-zip): everything except the META-INF folder is what get installed, and the updater-script file in META-INF\com\google\android\ (which you can open using a text editor like notepad) contains installation script detailing where (i.e., which partition on the NT) various components of the zip file get installed.
Typical ROM builds zip contain boot.img which gets installed on /boot partition, and a bunch of system files and apps to be installed on /system partition. Succulent's ROM builds also include recovery which gets installed on /recovery partition. Finally gapps apps get installed on /system as well.
Really, really appreciate this OP, the replies, and the knowledge. VERY helpful. Wont do this til the 1st and will let you know the results... Again, THANKs
Sent from my SAMSUNG-SGH-I317 using xda premium
Well your method worked flawlessly. I had a few minor operator errors but it went just as you explained. I did, however, have a fatal bug in the rom. Not sure who to report it to, but while messing around in settings I tried to change the color of the clock in the status bar. It totally blew away systemui. I tried everything I knew of to restart and recover but had to resort to wipe/factory reset. Could not figure out what data file got corrupted. That in turn made me have to flash the gapps again because none of the Google apps worked including play store. The net result is to add 1 more step to your method. BEFORE messsing with settings, and after the initial setup is complete, boot to recovery and do another backup..I forgot to mention I flashed 20121231, which is the latest release. Thank you so much for your knowledge and reseach. STOCK ROOTED TO CM10 RELEASED.
Sent from my SAMSUNG-SGH-I317 using xda premium
Stuck on backup in CWM 6.0.1.2
My 16gbNT is currently running Team_B CM7. I'm trying to install Kuzma30's CM10.1 from a SD card. Following the instructions from this OP. While trying to perform my backup the process gets about 3/4 of the way through and then sticks at the file named "generic11.lda". It doesn't continue after that and I have left it alone for a considerable amount of time. Any idea what's causing the stick? I've tried it about three or four times with occasionally sticking at different files but it is still about 3/4 of the way through. Backup will not finish.
Any help is greatly appreciated.
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Backup success, Install failure
digixmax said:
I'd suggest trying a version of CWM that is considered compatible with CM7, e.g., CM7-9_CWM_v5.5.x_8gb-16gb_tools_sdcard.zip from http://forum.xda-developers.com/showthread.php?t=1640958 (but then remember to flash CM10.1 with 6.0.1.2).
Also check and make sure that you have enough space on your SDcard (you can/should remove backup data associated with failed partial backup attempts).
Click to expand...
Click to collapse
Backup successful! Thanks button pressed. Now on the install I used CWM 6.0.1.2 and I'm not allowed to complete the install. It aborts installation and gives the following error:
"Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10.1-20130102-UNOFFICIAL-acclaim.zip
(Status 7)
Installation aborted."
Any ideas?
Your guide is quite clear but somehow it is not working for me. I have a fresh NT 8GB with stock 1.2 on it.
I obtained the 6 files you mention:
- u-boot.bin
- MLO
- flashing_boot.img
- recovery.img (= cwm_6012_sd.img)
- gapps-jb-20121011-signed.zip
- cm-10-20121231-NOOKTABLET-acclaim-HD.zip (from: http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/)
I copied them to a 16GB 10x SD card and placed the SD card in my NT.
The problem is that whatever I do, it always boots the stock os and never into Cyanoboot. I know I have to connect the NT to my computer with USB and wait for it to boot, but even then it only load the stock OS.
Am I doing something wrong here?
Help much appreciated!
Hi,
I am using barnes and noble nook tablet, flashed custom recovery cwm based recovery v 6.0.1.9 and the latest nightly : cm-10.1-20130514-NIGHTLY-acclaim.zip, latest gapps: gapps-jb-20130301-signed.zip. I am having few problems, hope I can get some resolution here.
Firstly I am unable to hard rest my tablet, either erase all data in settings or wiping everything from recovery doesn't restore my tablet to the factory state. I have the same wallpaper, lock screen, google account and everything.
The applications I have uninstalled are also shown and I am unable to get rid of them
super user application is not working and crashes on starting the program and also during start up
every application or system process crashes on start up and keeps popping message indefinitely so that the only thing I can do with my tablet is just to press ok for the popup sparing some few second lapses
few error messages are like this:
unfortunately, the process android.process.acore has stopped
unfortunately superuser has stopped
unfortunately, the process com.google.process.gapps has stopped
unfortunately, Exchange services has stopped
unfortunately, Email has stopped
unfortunately, google partner setup has stopped
unfortunately, google play services has stopped
unfortunately, talk has stopped
etc etc, they keep on coming and make me do nothing, I have tried going to recovery and wiping everything including rom cache system factory cache dalvik data etc what all are available, and tried flashing cyanogenmod and gapps again and again, but neither the data is wiped nor are the problems resolved,
Any help is highly appreciated. Thanks in advance..
additional info
i have other problems like settings not getting saved, for example If i enable debugging in developer options, the movement I go back to previous settings and come again to developer options, the setting remains unchecked. Even the about of the tablet is showing older cyanogenmod status like10-20121209-unofficial-acclaim although I flashed it with 10.1 nightly
Please help me. Thank you.
I don't know what went wrong in your installation. It seems very messed up.
If it was me I'd strat from scratch again with the "repart.img" (mentioned in many places here) that restores your device to "fresh out of the box" condition.
It's possible you have messed up ny formatting wiping too much in your desire ti wipe it clean though and if that's the case the repart.img won't work.
asawi said:
I don't know what went wrong in your installation. It seems very messed up.
If it was me I'd strat from scratch again with the "repart.img" (mentioned in many places here) that restores your device to "fresh out of the box" condition.
It's possible you have messed up ny formatting wiping too much in your desire ti wipe it clean though and if that's the case the repart.img won't work.
Click to expand...
Click to collapse
Thanks for reply, dint get time to immediately test, but what happened is I get a green check mark after getting installing new software, after which i am supposed to remove sd card and nook restarts itself, the nook does restart but cyanoboot starts up and cyanogenmod starts up, i am not getting message clearing data. What wrong could i have done?? Thank in advance.
The worst part is even if i load a sd card image with bootable rom also (from succulent), i am getting same errors, everything is crashing, i cant get beyond the start screen...I couldn't understand one thing, if this is a problem with the rom or other formatting, why is sd card image not working and showing the same errors as internal image?? I get the same error messages as described in the first post of this thread even with the sd card image..Any help is highly appreciated..
rammbbs7 said:
The worst part is even if i load a sd card image with bootable rom also (from succulent), i am getting same errors, everything is crashing, i cant get beyond the start screen...I couldn't understand one thing, if this is a problem with the rom or other formatting, why is sd card image not working and showing the same errors as internal image?? I get the same error messages as described in the first post of this thread even with the sd card image..Any help is highly appreciated..
Click to expand...
Click to collapse
It might be that the NT still boots from emmc rather than off SD. Some NTs will only boot off SD from the power-off state and upon insertion of a powered USB cable. If/when the NT successfully boots off SD for the first time it should take you through a series of network and Google account setup screens, that's how you'd know you're running off SD. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info/pointers on creating bootable SD cards.
Also, if you're going to re-install CM10 down the road, you might want to take a look at http://forum.xda-developers.com/showthread.php?t=2056626.
digixmax said:
It might be that the NT still boots from emmc rather than off SD. Some NTs will only boot off SD from the power-off state and upon insertion of a powered USB cable. If/when the NT successfully boots off SD for the first time it should take you through a series of network and Google account setup screens, that's how you'd know you're running off SD. See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info/pointers on creating bootable SD cards.
Also, if you're going to re-install CM10 down the road, you might want to take a look at http://forum.xda-developers.com/showthread.php?t=2056626.
Click to expand...
Click to collapse
I know clearly that the nook tablet is booting from the sd card, because its asking me to setup new google account etc, but as the keyboard app is crashing, i cant enter my wifi password to continue, also other error messages are also occurring preventing me from doing anything further. Also during start up I am seeing a different version of cyanoboot and recovery which is matching with my sd card's version, further proof that I am booting from my sd card. Could this be any hardware issue other than emmc or rom? Could this be an issue with the RAM or something else. Thanks for support.
Try Albert's way to turn back to stock again
Check out Albert's [Devs] post for making SD card reboot back to BN stock 4.2 and start over...Using the Nightly builds of CM 10 are very UN stable Roms..experimental..If you want clean stable then I recommend using pacman's Rom build or my Favorite build PA Android build I'm currently using now.
Lestwist50 said:
Using the Nightly builds of CM 10 are very UN stable Roms..experimental..If you want clean stable then I recommend using pacman's Rom build or my Favorite build PA Android build I'm currently using now.
Click to expand...
Click to collapse
Strongly disagree, since the current nightly build is in RC5 status, but whatever...
OP: What class of SD card are you booting from? Also, did you flash your touchscreen firmware by any chance?
class 4 sd card, i dont know if i flashed the touchscreen firmware or not, i dint specifically do something like that. I cant even use the repart.img as the its working in the beginning and i getting a green check mark but after booting that, its simply starting the preinstalled cyanogenmod instead of wiping the device. Any further help?? Thanks in advance. It would be nice if any can diagnose whats wrong, whether the hardware or the software. Thank you.
Did you try this? http://forum.xda-developers.com/showthread.php?t=1470910
Evening all,
I previously rooted my Nook Tablet 16gb using an SDCard and I believe CM7. I stopped using the nook for awhile and when I brought it back out CM7 would constantly crash. I don't know if I should start with the guide on the Android Developers sub forum as I don't know if that's current.
Could someone please point me in the right direction for where to get started? Is the SD card method the best? What launcher should I choose? I'll continue searching the forums but any help is greatly appreciated.
Thanks!
Punkrulz24 said:
Evening all,
I previously rooted my Nook Tablet 16gb using an SDCard and I believe CM7. I stopped using the nook for awhile and when I brought it back out CM7 would constantly crash. I don't know if I should start with the guide on the Android Developers sub forum as I don't know if that's current.
Could someone please point me in the right direction for where to get started? Is the SD card method the best? What launcher should I choose? I'll continue searching the forums but any help is greatly appreciated.
Thanks!
Click to expand...
Click to collapse
CM10+ is your best bet. It's based on Jelly Bean. Pretty stable also. CM10 released a stable version on 12/31 and CM10.1 is almost to it's stable release (RC4 was just released.)
The succulent versions are my favorite. Go to http://iamafanof.wordpress.com/ and check out some of the posts. Find something you like. If you need help just let me know.
Punkrulz24 said:
...
Could someone please point me in the right direction for where to get started?
...
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
Thanks to the both of you. Data, in my own research I have found the Succulent versions of which you speak. So far I've been following this guide here, but I've run into a pretty big issue. The images that I'm trying to download are hosted on this goo.im site, and I'm having numerous problems trying to download from there. If I can get the download to work, it slows to a crawl then ultimately stops. Any browser I use fails with this.
I'm still searching, however do you know of any other mirrors I would be able to download the releases?
Also, the Nook was already previously rooted. Do I need to update CWM or the root to be able to use CM10? And if so, how?
Thanks!
I managed to download the files that were necessary and got it running. The only problem I'm having now is the sluggishness that is being caused by CM10.1. Waiting to see if this is fixed via a reboot, but it's even taking a little while just to open the book on the Nook. I don't know if this is due to having previous files on the nook or anything. I need to start looking into ways to completely restore the Nook to factory condition and work at it from there as well. Even after the reboot just bringing the Nook out of lock can take awhile.
Also it appears some report that this can be untethered... and some report that they always have to reboot with power plug to get it to load CM10.1. Has anyone been able to force the issue one way or the other? Any idea why some have success and some don't? As always I'll continue searching, but if you get to the answers before I do I would appreciate it.
Punkrulz24 said:
I managed to download the files that were necessary and got it running. The only problem I'm having now is the sluggishness that is being caused by CM10.1. Waiting to see if this is fixed via a reboot, but it's even taking a little while just to open the book on the Nook. I don't know if this is due to having previous files on the nook or anything. I need to start looking into ways to completely restore the Nook to factory condition and work at it from there as well. Even after the reboot just bringing the Nook out of lock can take awhile.
...
Click to expand...
Click to collapse
If you're running CM internally on EMMC I'd suggest you wipe /data (which will entail reloading your apps from Google Play) and /cache; if you're running CM off SD card you'd need to wipe the /data partition on the SD card (aka /data1 if you're using CWM version compiled by Succulent).
digixmax said:
If you're running CM internally on EMMC I'd suggest you wipe /data (which will entail reloading your apps from Google Play) and /cache; if you're running CM off SD card you'd need to wipe the /data partition on the SD card (aka /data1 if you're using CWM version compiled by Succulent).
Click to expand...
Click to collapse
Digi I believe it's off of the SDCard. When I boot the Nook w/o power or SDCard it loads Nook software + root. I went ahead and formatted the data partition as well as the system partition (for some reason in my partition manager it was listed as EXT3)... got everything squared away. The OS part of it seems to be running a bit better right now... Loading a book in the Nook app still takes forever but I'm beginning to think that's because it's Game of Thrones, and it merged 4 books into one so it's like 3500 pages. It takes between 45-60 seconds to load each time I go in.
Punkrulz24 said:
Digi I believe it's off of the SDCard. When I boot the Nook w/o power or SDCard it loads Nook software + root. I went ahead and formatted the data partition as well as the system partition (for some reason in my partition manager it was listed as EXT3)
...
Click to expand...
Click to collapse
/system's partition type is supposed to be ext3.
... got everything squared away. The OS part of it seems to be running a bit better right now...
...
Click to expand...
Click to collapse
You might want to take a look at this thread http://forum.xda-developers.com/showthread.php?t=1005633 which discusses comparative performance of different brands and classes of SDcard for the purpose of running ROM.
CM10.1 is a speed demon on my mom's NT. I've never ran on anything but emmc, however.
Sent from my DROID RAZR MAXX HD
I got a NT not long ago and it is now rooted and running CM10, however I still lost in regards the 1gb user partition. CM10 is installed in that partition and I wanted in fact repartition the NT but the process seems to be confuse and risky so I was wondering if I have to stay llimited to work with just 1GB.
How about games and other programs I download? Are they all be installed in that 1gb?
I inserted a 16gb card but I cannot re -direct the apps to install in the external or even move them to the sd ext card. I also cannot see it with a file manager.
Could I use the B&N partition to load movies, apps etc or it will be sitting there useless?
Is there maybe an easier way to re-flash and repartition?
Thank you
BUMP!
You can reaprtition the same way they do in stores if you want to and get an 8GB partition for own storage. The repart.img mentioned in many other topics will do that for you. You will loose everyhting and get right back to out of the box stock firmware if you do it, but it's really easy.
asawi said:
You can reaprtition the same way they do in stores if you want to and get an 8GB partition for own storage. The repart.img mentioned in many other topics will do that for you. You will loose everyhting and get right back to out of the box stock firmware if you do it, but it's really easy.
Click to expand...
Click to collapse
Thank you Asawi, yes I really would like to repartition it. I hate to have that wasted space.
I will try find the best thread on how to use the repart.img. or please point me out in case you already know.
Thanks!!
http://forum.xda-developers.com/showthread.php?t=1663836
The download link is in the very beginning of this post. If you've got image writing software already you can then jump to step 2. Extract the downlad and burn the reaprt.img to a card. Insert card and boot to it. After a few minutes a green chejmark should appear. (If a red cross appears instead you're in trouble.) Remove card and an update starts and goes on for a few minutes and you can then start over with yout CM10 install again.
asawi said:
http://forum.xda-developers.com/showthread.php?t=1663836
The download link is in the very beginning of this post. If you've got image writing software already you can then jump to step 2. Extract the downlad and burn the reaprt.img to a card. Insert card and boot to it. After a few minutes a green chejmark should appear. (If a red cross appears instead you're in trouble.) Remove card and an update starts and goes on for a few minutes and you can then start over with yout CM10 install again.
Click to expand...
Click to collapse
So after doing this will I have to reroot or I just have to reinstall cm10? Getting my 16gb card in the mail (hopefully today) should I wait to get the card or can I just copy everything from my 8bg to the 16 and everything remain? Thank you for your help!
It's probably me being stupid, but I don't understand what setup you have and quite what you are talking about. Running the repart .img will completely erase everything on the device and set it back to freshly bought. Whatever you have in internal memory that you want to save you need to save somewhere else.
I don't get your reasoning that CM10 is installed in your 1GB partition, because that is not the norm.
Probably me being stupid, but I can't help you.
Mystina83 said:
So after doing this will I have to reroot or I just have to reinstall cm10? Getting my 16gb card in the mail (hopefully today) should I wait to get the card or can I just copy everything from my 8bg to the 16 and everything remain? Thank you for your help!
Click to expand...
Click to collapse
Never mind I fully read the post and now know I will have to reroot. Glad I bookmarked all the pages I used.
Mystina83 said:
Never mind I fully read the post and now know I will have to reroot. Glad I bookmarked all the pages I used.
Click to expand...
Click to collapse
Well, if you're installing CM10 you don't actually have to root as a separate process. Just install CM10 and rooting will come done at the same time. Itäs only if you plan to run stock you need to root.
If you have to go and get stuff from several pages you are probably not doing the installing in a very efficient way. Possibly things can be done a lot easier now than whe you originally did it.
Ihave made several posts outlining an extremely easy way to install CM. Look for them if you want to.
asawi said:
Well, if you're installing CM10 you don't actually have to root as a separate process. Just install CM10 and rooting will come done at the same time. Itäs only if you plan to run stock you need to root.
If you have to go and get stuff from several pages you are probably not doing the installing in a very efficient way. Possibly things can be done a lot easier now than whe you originally did it.
Ihave made several posts outlining an extremely easy way to install CM. Look for them if you want to.
Click to expand...
Click to collapse
I had already done the root from a video I saw on youtube then used your link for cm from the [Q] Noob Alert! Nook Tablet 8GB Rooting Question! post. So just doing the cm from that same post will also root my device? I don't really need anything on the actually nook. I got it as a gift and use the kindle app for all my books. I will defiently look into your other posts. I just got the NT a little less than a month ago.
If you root before installing CM10 you'll just overwrite the root you did, so no point in doing it.
Once CM10 is installed your Tablet should be rooted.
All you need to do is get into CWM 6.x.x an flash the ROM and appropriate gApps zips.