Hi Everyone
_______________________
I want to give you a l__RECOMMENDATIONS__l For the single core devices:
1-The reason of lagging games is the next:
A- (The chat apps) If you have many chat apps in you phone and you used it all it well be the ---> MAIN REASON OF LAGGING ON DEVICE!
So use at least one or two chat apps.
------------------------------------------------------
B- (Facebook) The facebook app take a huge amount of ram and make the device slower and laggy!
So dont use it.use your browser and navigate to facebook.com and go!
------------------------------------------------------------------------------------------------------
C- (Google chrome) This one too make the device slower and laggy! because he take a huge amount of ram and by that the performance well be LOOOOOOOOW
So use you normal android browser.
----------------------------------------------------
And if you finished from all that you well need these apps:
1- seeder app
2- seeder v7 zip ( see if it compatible with your device's rom first)
3- greenify app
4- overclocked you device ( like 1000Mhz max ---> Extend to 1300 Mhz max )
----------------------------------------------------------------------------------------------------------------
If there any questions please write it.and dont be shamed from what you say.
Any review is always welcome:laugh:
Dont be shamed to ask Little question its better than falling in big problems
And Very Soon I Well Add How To Use These Apps With Screenshots!
Have a nice day!
UPD:I have fixed the battery drain and increased some stuff.
Just add these in your build.brop:
---------------------------------------First Section--------------------------------------------------
General Performance
debug.sf.hw=1
------------------------------------------------------------------------------------------------------------
Increased Media & Streaming Performance
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960 net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.evdo_b=4096,87380,256960,4096,1 6384,256960
------------------------------------------------------------------------------------------------------------
Disable sending usage data
ro.config.nocheckin=1
------------------------------------------------------------------------------------------------------------
Saves power
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=60 (can be increased to higher values)
wifi.supplicant_scan_interval=180
------------------------------------------------------------------------------------------------------------
To make the phone ring faster when dialing out
ro.telephony.call_ring.delay=0
------------------------------------------------------------------------------------------------------------
Disable black screen issue after call
ro.lge.proximity.delay=25
mot.proximity.delay=25
------------------------------------------------------------------------------------------------------------
Makes apps load faster and frees more ram. (Edit exsisting line)(If you cant find it just semply add new line)
dalvik.vm.dexopt-flags=m=v,o=y
------------------------------------------------------------------------------------------------------------
For Faster streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
------------------------------------------------------------------------------------------------------------
Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
------------------------------------------------------------------------------------------------------------
Frees More RAM
persist.sys.purgeable_assets=1
------------------------------------------------------------------------------------------------------------
Awesome photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
------------------------------------------------------------------------------------------------------------
Fix some application issues (FC)
ro.kernel.android.checkjni=0
------------------------------------------------------------------------------------------------------------
Have A nice day:good:
And yes i have tried and its working:good:
------------------------------------------------------------------------------------------------------------
And if you want to add the lines from your phone just download the files in the attachments and put it in your phone and copy the texts and paste it in your build.brop:goodWithout the description please like---- Fix some application issues (FC)----just add the lines)
Something new
Now i am using cm 10.1 galaxy s4 rom beta 1 and its great:good:
AmrAllam7 said:
Now i am using cm 10.1 galaxy s4 rom beta 1 and its great:good:
Click to expand...
Click to collapse
any bugs?
Yeah Man
TheRealMenace said:
any bugs?
Click to expand...
Click to collapse
HI Bro
Yeah there is bugs like:
1- Sound error its horrible when i make it high.
2- i was found a battery drain but i fix it !:good:
AmrAllam7 said:
HI Bro
Yeah there is bugs like:
1- Sound error its horrible when i make it high.
2- i was found a battery drain but i fix it !:good:
Click to expand...
Click to collapse
how did you fix battery drain?
Hi Bro
TheRealMenace said:
how did you fix battery drain?
Click to expand...
Click to collapse
I have deleted the nfc service from the system and add some lines to build.prop.
What lines did you add?
TheRealMenace said:
What lines did you add?
Click to expand...
Click to collapse
Hi Bro:laugh:
I dont remember exactly but you still can writing these:
http://forum.xda-developers.com/showthread.php?t=1874269
Thanks bro! I just installed cm 10.1 galaxy s4 rom beta 1
TheRealMenace said:
Thanks bro! I just installed cm 10.1 galaxy s4 rom beta 1
Click to expand...
Click to collapse
Ok Have a nice day Bro:good:
Is seeder app and seeder v7 zip same app?
Sent from my LG-P700 using xda app-developers app
OK, first of all, seederv7 and seeder is same.
Overclocking to 1300 Mhz WILL make device hot, and battery drains too fast. L7 already overclocked by default.
And some of build.prop tweaks are USELESS like :
mot.proximity.delay=25 > This is for Motorolla Phone only
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000 > This is already hardcoded in framework somewhere, it CAN'T be changed in build.prop
ro.config.nocheckin=1 > This is a myth actually. This is only for HTC Phones. This line won't disable anything.
windowsmgr.max_events_per_sec=60 > This line is not useless, but it's becoming useless if you recommend to increase it.
So these are my comments. Not all are recommended for L7, and yes i did some Google search first.
F4uzan said:
OK, first of all, seederv7 and seeder is same.
Overclocking to 1300 Mhz WILL make device hot, and battery drains too fast. L7 already overclocked by default.
And some of build.prop tweaks are USELESS like :
mot.proximity.delay=25 > This is for Motorolla Phone only
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000 > This is already hardcoded in framework somewhere, it CAN'T be changed in build.prop
ro.config.nocheckin=1 > This is a myth actually. This is only for HTC Phones. This line won't disable anything.
windowsmgr.max_events_per_sec=60 > This line is not useless, but it's becoming useless if you recommend to increase it.
So these are my comments. Not all are recommended for L7, and yes i did some Google search first.
Click to expand...
Click to collapse
Hi Bro :laugh:
Ok thank you for this information's i did not know these because i have searched and found these and the thread maker war not written this is for motorollla or htc or dont write it
So at the end thanks:good:
toske81 said:
Is seeder app and seeder v7 zip same app?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
Yes:good: like he said before :laugh:
toske81 said:
Is seeder app and seeder v7 zip same app?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
And to know
The deference between seeder app and seeder v7 is the next:
Seeder app is customize able. you switch between light and moderate and aggressive mod:laugh:
But the seeder v7 is not customize able. you flashed via cwm and he goes on from it self i have tried and he goes on it self
I hope that helped:angel:
Nice
Sent from my LG-P700 using xda premium
Related
Here are the collection of various scripts, tweaks etc.
Warning: All of the scripts & other tweaks are collected from various sources. So please please be careful before experimenting with them. Please take necessary backups before applying anything.
build.prop tweaks
First copy the build.prop and rename it to build.prop.bak for backup
Open build.prop in notepad.
at the end of the line write a line of code into build.prop and that line tells the android system what to do.
Code:
## Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
##VM Heapsize; 178MB RAM = 32 is better
dalvik.vm.heapsize=48m
##Render UI with GPU
debug.sf.hw=1
##Decrease dialing out delay
ro.telephony.call_ring.delay=0
##Helps scrolling responsiveness
windowsmgr.max_events_per_sec=150
##Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
##Disable debugging notify icon on statusbar
persist.adb.notify=0
##Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
##Raise photo and video recording quality (2.3 ROM only)
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Photo and video recording quality tweak (2.2 Rom only)
ro.media.dec.jpeg.memcap=10000000
ro.media.enc.hprof.vid.bps=1000000
##Signal (3G) tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
##Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
##Disable blackscreen issue after a call
ro.lge.proximity.delay=25
mot.proximity.delay=25
##Fix some application issues
ro.kernel.android.checkjni=0
##Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
##Force button lights on when screen is on
ro.mot.buttonlight.timeout=0
##Disable boot animation for faster boot
debug.sf.nobootanimation=1
# Enable Stagefright helps stream Video and Music Faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
# Enable display Dithering
persist.sys.use_dithering=1
# Enable purgeable assets
persist.sys.purgeable_assets=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
##Miscellaneous flags
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
nice!
i will use some if the thread is ready
Tried a few, didnt notice any difference. Do i need to add the
## Raise JPG quality to 100% above the code ro.media.enc.jpeg.quality=100
So it looks just like you have it?
## Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
XperianceIT said:
Tried a few, didnt notice any difference. Do i need to add the
## Raise JPG quality to 100% above the code ro.media.enc.jpeg.quality=100
So it looks just like you have it?
## Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
Click to expand...
Click to collapse
hash symbol just means the system will ignore that line,basiclly for you so you know which script is which
just copy and paste job really
XperianceIT said:
Tried a few, didnt notice any difference. Do i need to add the
## Raise JPG quality to 100% above the code ro.media.enc.jpeg.quality=100
So it looks just like you have it?
## Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
Click to expand...
Click to collapse
No you don't need the top line.
Sent from my R800i using Tapatalk
OK, that's what I was thinking. Thanks.
XperianceIT
sent from my Xplay R800X, using XDA App!
nice list
i had a fast look at my builp.prop and saw that a couple of the tweeks were the
same as supercharged script tweeks but a fews of them had different values .
anyway nice list ,thanks
3G?
I put in the 3g tweaks but didn't notice any difference so far. Was it suppose to give a better signal?
Anyway thanks for the list
Just copied some of the tweaks you have mentioned, some I already had, what I didnt I pasted into my build.prop. Rebooting now, will see how it goes. But wanted to thank you big time for making these build.prop tweaks available to all. Thank you.
Gonna test some of these tweaks for few days.
Also I've noticed that enabling Stagefright slightly improves the score in AnTuTu Benchmark
Thanks for the thread!
Do the 3G tweaks work on R800x?
Sent from my R800x using XDA App
Thanks for your list. But do you think this tweak (## Raise JPG quality to 100%ro.media.enc.jpeg.quality=100) will affect Bravia engine mod in any negative way?? Does it affect the capture of photo or the viewing on device? Obviously I want best quality and Ive been really happy with the bravia engine. It is very vivid and great detail.
**Edit** I just soft- bricked phone. I am stuck on DoomKernel(v.10) logo 7 so I cant even get into CWM touch! I think I did it by leaving 1st line in (I.E. ## Raise JPG quality to 100%, ##VM Heapsize; 178MB RAM = 32 is better, ##Decrease dialing out delay) Did I confuse the hell out of my phone with these lines? Or just myself??lmao.
very nice.. I like it..!!!
cyrusalmighty said:
Thanks for your list. But do you think this tweak (## Raise JPG quality to 100%ro.media.enc.jpeg.quality=100) will affect Bravia engine mod in any negative way?? Does it affect the capture of photo or the viewing on device? Obviously I want best quality and Ive been really happy with the bravia engine. It is very vivid and great detail.
**Edit** I just soft- bricked phone. I am stuck on DoomKernel(v.10) logo 7 so I cant even get into CWM touch! I think I did it by leaving 1st line in (I.E. ## Raise JPG quality to 100%, ##VM Heapsize; 178MB RAM = 32 is better, ##Decrease dialing out delay) Did I confuse the hell out of my phone with these lines? Or just myself??lmao.
Click to expand...
Click to collapse
No, these are just comments, so will have been ignored. If you made a backup of the build.prop, you could boot recovery and copy it over, or via adb.
Wow. Ok, I just reflashed .42 & fastbooted my doomkernel+root & restored my most recent backup. Im back where I started ,but what did I do wrong? I only copied and pasted a couple lines, & I have dealt with the build.prop before.
Edit* I just saw your response. I did have the backup of the build.prop, but I wasnt able to get past the doomkernel animation(that comes right before the recovery screen). So i couldnt get to recovery, and unfortunetly I can never get ADB to work ever. It always says "ADB was not found, you will not be able to manipulate files" error message on startup.confused I have it in c://android-sdk/platform-tools. I had to reflash and restore an older backup, but now im not sure what I did wrong in build.prop.
cyrusalmighty said:
Wow. Ok, I just reflashed .42 & fastbooted my doomkernel+root & restored my most recent backup. Im back where I started ,but what did I do wrong? I only copied and pasted a couple lines, & I have dealt with the build.prop before.
Edit* I just saw your response. I did have the backup of the build.prop, but I wasnt able to get past the doomkernel animation(that comes right before the recovery screen). So i couldnt get to recovery, and unfortunetly I can never get ADB to work ever. It always says "ADB was not found, you will not be able to manipulate files" error message on startup.confused I have it in c://android-sdk/platform-tools. I had to reflash and restore an older backup, but now im not sure what I did wrong in build.prop.
Click to expand...
Click to collapse
Try fastbooting into the recovery (fastboot boot name.img) and mount the system. Then use adb (in the recovery) to push the old build.prop.
Sent from my R800x using Tapatalk
Do the 3G tweaks work for CDMA?
Sent from my R800x using XDA App
savage24x said:
Do the 3G tweaks work for CDMA?
Sent from my R800x using XDA App
Click to expand...
Click to collapse
I put them on my verizon play and nothing bad happened, cant say it impoved anything I have noticed but nothing bad happens.
Sent from my R800x using XDA App
ekklesiaillusion said:
I put them on my verizon play and nothing bad happened, cant say it impoved anything I have noticed but nothing bad happens.
Sent from my R800x using XDA App
Click to expand...
Click to collapse
Thank you.
Sent from my R800x using XDA App
Hi Guys,
Since the New ICS Beta is here and has almost everything functional..
So Guys .. If you know any TWEAKS Please Share....
Let me start with one.. Try this...
1) Add the following in build.prop using Root Explorer and Reboot.. You will see scrolling and touch responsiveness and UI will be significantly improved..
Performance Tweaks
Code:
# Increase overall touch responsiveness
windowsmgr.max_events_per_sec=150
debug.performance.tuning=1
video.accelerate.hw=1
2) Keep window animations to .5x and you will have a smoother lagless UI experience
3) Install Nova Launcher from Market (we all know that)
4) by andy_dunlop
For a brighter LED add to hw_config.sh then reboot
# led
echo 10000 > $dev/red/max_current
echo 42000 > $dev/green/max_current
echo 30000 > $dev/blue/max_current
Click to expand...
Click to collapse
5) by Sirkay
# Network 2G/3G optimization
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.telephony.default_network=0
# performance
debug.sf.hw=1 # Rendering User Interface With GPU
dalvik.vm.execution-mode=int:jit
pm.sleep_mode=1 # saves power when deep sleep
ro.ril.disable.collapse=1 # Allows the phone to sleep better
Click to expand...
Click to collapse
MODS:
1% battery Mods --> Visit HERE
For a brighter LED add to hw_config.sh then reboot
# led
echo 10000 > $dev/red/max_current
echo 42000 > $dev/green/max_current
echo 30000 > $dev/blue/max_current
# Network 2G/3G optimization
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.telephony.default_network=0
# performance
debug.sf.hw=1 # Rendering User Interface With GPU
dalvik.vm.execution-mode=int:jit
pm.sleep_mode=1 # saves power when deep sleep
ro.ril.disable.collapse=1 # Allows the phone to sleep better
nice mods...
and please mention what each mod is for... i am trying 1% battery mod buy it's not working...,looks like it lies in framework.odex and i don't know how to edit that...
andy_dunlop said:
For a brighter LED add to hw_config.sh then reboot
# led
echo 10000 > $dev/red/max_current
echo 42000 > $dev/green/max_current
echo 30000 > $dev/blue/max_current
Click to expand...
Click to collapse
Max value is 20000 (look in sys/class/leds/color/max_current for used values). So your values are 10000/20000/20000.
But I´m not sure about battery drain at max.
Actually I use R/G/B = 4000/10000/10000 - that´s bright enough for me.
how do i get the toggles in status bar? thanks
How is the battery drain going for you guys?
Sent from my iPod touch using Tapatalk
Well i deleted apps such as e-mail, gmail, facebook and a few other so it is going pretty well. I've used around 50% battery in 36 hours. And you have to consider that this is not normal usage since i'm testing if everything works and so on.
sirkay said:
# Network 2G/3G optimization
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.telephony.default_network=0
# performance
debug.sf.hw=1 # Rendering User Interface With GPU
dalvik.vm.execution-mode=int:jit
pm.sleep_mode=1 # saves power when deep sleep
ro.ril.disable.collapse=1 # Allows the phone to sleep better
Click to expand...
Click to collapse
Do we add these lines to build.prop ?
Do we add them at the end of the file ?
some other build.prop tweaks that i used
#
# Network speed
#
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
#
# Streaming Tweaks
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
#
# Media/Images Enhancement
#
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
#ro.media.capture.flash=led
ro.media.capture.torchIntensity=40
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
Sent from my ST18i using XDA App
mathewgx said:
Do we add these lines to build.prop ?
Do we add them at the end of the file ?
Click to expand...
Click to collapse
Doesn't matter, just place it at the end if you like, at the beginning or in the middle, you can even scatter it though the build.prop if you like
Sent from my LT15i using xda premium
Is there a tweak to force that the SE Launcher will stay in RAM whatever happens?(There's a similar setting in CM7)
I hate redraws of the homescreen...
Thanks for the other tweaks! Runs much smoother now!
[GER]Roxxor said:
Is there a tweak to force that the SE Launcher will stay in RAM whatever happens?(There's a similar setting in CM7)
I hate redraws of the homescreen...
Thanks for the other tweaks! Runs much smoother now!
Click to expand...
Click to collapse
never found one for the time being
sirkay said:
never found one for the time being
Click to expand...
Click to collapse
Can't resist the tweak from jjdoctor and flashed it right away.. Well i think the lag comes down to the Launcher being used. the scrolling is smoother this time, but i'm unsure if that is caused by the tweak since it's smoother from the get go.. :/ but anyway thanks jjdoctor for the tweaks, you poisoned me to use ICS again
hansip87 said:
Can't resist the tweak from jjdoctor and flashed it right away.. Well i think the lag comes down to the Launcher being used. the scrolling is smoother this time, but i'm unsure if that is caused by the tweak since it's smoother from the get go.. :/ but anyway thanks jjdoctor for the tweaks, you poisoned me to use ICS again
Click to expand...
Click to collapse
you mean the AOSP ROM?
idareyoutoclickthis said:
you mean the AOSP ROM?
Click to expand...
Click to collapse
No, i mean the one from Sony. Well, i think i'll mod the services.jar to be able to apply Supercharger in ICS.. I'll post it here too if it can be achieved.. Stay Tuned
hansip87 said:
Can't resist the tweak from jjdoctor and flashed it right away.. Well i think the lag comes down to the Launcher being used. the scrolling is smoother this time, but i'm unsure if that is caused by the tweak since it's smoother from the get go.. :/ but anyway thanks jjdoctor for the tweaks, you poisoned me to use ICS again
Click to expand...
Click to collapse
the lag is happened in every fresh flash, because of the media server crazily search & re-index our media in sdcard, the bigger the sdcard the longer it takes, for my 8GB class 10 sdcard (only few media files inside) takes around 20 minutes to finish.
after it finished, everything getting smother, that what I get by watching cpu usage overlay screen
[GER]Roxxor said:
Is there a tweak to force that the SE Launcher will stay in RAM whatever happens?(There's a similar setting in CM7)
I hate redraws of the homescreen...
Thanks for the other tweaks! Runs much smoother now!
Click to expand...
Click to collapse
yes there is,
fyi, CM's "Lock Home In Memory" actually still have a chance to get redrawn.
but if you want your home launcher 100% locked in memory you need to edit service.jar
attachment is edited SE ICS Beta's service.jar
flash using cwm
[edit]oops... sorry didn't see hansip87 going to make it too,
then it's your job gan hansip87 to make supercharge script patch
szl.kiev said:
yes there is,
fyi, CM's "Lock Home In Memory" actually still have a chance to get redrawn.
but if you want your home launcher 100% locked in memory you need to edit service.jar
attachment is edited SE ICS Beta's service.jar
flash using cwm
[edit]oops... sorry didn't see hansip87 going to make it too,
then it's your job gan hansip87 to make supercharge script patch
Click to expand...
Click to collapse
Ou you already made that no matter, just using your mod then thanks!
Thx again szl...great job. Keep doing good think for our rom..together we can be better
Found some tweak, don't know if it will works, trying myself now. Original article: http://www.ifans.com/forums/threads/ics-performance-tweaks.369959/
Add this to build.prop:
Code:
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
com.qc.hardware=true
ro.kernel.android.checkjni=0
ro.max.fling_velocity=4000
debug.enabletr=true
UPDATE: So far it makes the windows and transition performance at 1x quite smooth
and this (better backup yours first, don't think the following is safe to be used :/)
Get rid of CPU rendering:
Navigate to /system/lib/egl/
Open the file named "egl.cfg"
Delete the first line. It should say "0 0 android" or something similar
Go back into the egl folder and delete libGLES_android.so
What this does is remove the entire soft-rendering pathway from the OS.
As topic, pls
Sent from my SO-01C using xda premium
And my questions is:
how much ram consumming apps do you have? then,you will find the answer you are looking for
Which you prefer? It's yours
Method 1 [Recommended] esp. rooted X10i with customizable build prop along:
Source from: http://androidforums.com/warp-all-things-root/504850-build-prop-speed-tweaks-updated-mar-12th.html
Description : "This new build.prop that i edited actually speeds up your phone from somewhere to 20-30 percent and also reduce lags. Its very easy to install the new build.prop please follow the directions below."
Lines added:
ro.config.hwfeature_wakeupkey=0
windowsmgr.max_events_per_sec=150
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
persist.adb.notify=1
debug.performance.tuning=1
video.accelerate.he=1
ro.media.enc.hprof.vid.bps =8000000
ro.media.capture.maxees=8m
ro.media.capture.fast.fps =4
ro.media.capture.slow.fps=120
ro.media.capture.flashMinV=33000000
ro.media. capture.torchIntensity=40
ro.media.capture.torchIntensity=70
ro.media.panorama.defres=3264x1840
ro.media.capture.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=180
ro.media.enc.jpeg.quality=90
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.lge.proximity.delay=150
mot.proximity.delay=150 If new, Write these inside your BuildProp and save and restart your phone. If got already, edit them and save restart phone. Should see some difference.
METHOD 2
Get Awesome Camera apps which use alternative launching commands by just clicking them.
Recommended Camera Apps Link: http://www.gadgetcage.com/best-android-camera-apps/17839/
METHOD 3
Optimise your unneccessary/used apps by "force stopping them" to increase free RAM under Setting>Applications>Running Service
By clearing them, phone will not be overloaded and reducing launch reaction time for apps including camera launch Therefore, apps can be launched faster.
Hope these help
whitefang
kalel29 said:
And my questions is:
how much ram consumming apps do you have? then,you will find the answer you are looking for
Click to expand...
Click to collapse
I have 120mb free ram when i open the camera , and it takes 3 to 4 seconds to launch.
It didn't answer my question.
There is only one way to spped up camera launch ,get cyanogenmod.
SMASH :good: BUTTON IF I HELPED YOU
techdevilisnowmonster said:
There is only one way to spped up camera launch ,get cyanogenmod.
SMASH :good: BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
I love the stock SE camera but yes its painfully slow even on customs roms.
Then I decided to use Camera ICS from playstore . I am just impressed with its starting and capturing speed
Guys I've searched a lot of places on net and finally making a list of build.prop tweaks that i find everywhere (all at one place).. This all can really help extending the battery, improve performance and so on.....
Here are they : (would keep updating as i find more)
General Performance
debug.sf.hw=1
Edit existing line,
dalvik.vm.heapsize=48m
persist.sys.ui.hw=1
Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Saves power
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=60 (can be increased to higher values)
wifi.supplicant_scan_interval=180
Raises quality of images
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
Increased Media & Streaming Performance
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960 net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.evdo_b=4096,87380,256960,4096,1 6384,256960
Disable sending usage data
ro.config.nocheckin=1
To make the phone ring faster when dialing out
ro.telephony.call_ring.delay=0
Disable black screen issue after call
ro.lge.proximity.delay=25
mot.proximity.delay=25
Disable USB Debugging icon from Status Bar. (Just the Icon, debugging remains enabled.)
persist.adb.notify=0
Makes apps load faster and frees more ram. (Edit exsisting line)
dalvik.vm.dexopt-flags=m=v,o=y
Improve 3g data speeds
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Update :
Increase the volume steps in-call :
ro.config.vc_call_steps=20
By Default, android offers seven audio levels for calls. This can be altered through this command , if you want to fine adjust the volume of your voice calls. This won’t increase the volume if it’s already low. But you can manage it by more precisely.
Values
Number of steps as integers. 7-20 is recommended. 7 is the default.
To Disable Boot Animation :
debug.sf.nobootanimation=1
Increase Touch responsiveness :
debug.performance.tuning=1
video.accelerate.hw=1
Add any of these at the bottom of the build.prop using ES/ROOT explorer and save it..
Edit : Change the permissions to rw-r-r after edit (thanks to LenAsh).
Reboot
UPDATED JB TWEAKS
For Faster streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
Frees More RAM
persist.sys.purgeable_assets=1
Enable surface dithering
persist.sys.use_dithering=1
[(0= off, 1= on) - dont write these]
More to COME ~~~!! :laugh:
I've got some more. I'll add them when I get to work
Some would have no effect on our phones as they are either redundant or apply to specific phones (MOT and LG for instance) and/or builds.
Note that any changes to build.prop using ES or other WILL require the file permissions to be reset to RW- R-- R-- after edit and then a reboot.
LenAsh said:
Some would have no effect on our phones as they are either redundant or apply to specific phones (MOT and LG for instance) and/or builds.
Note that any changes to build.prop using ES or other WILL require the file permissions to be reset to RW- R-- R-- after edit and then a reboot.
Click to expand...
Click to collapse
Forgot to add that!! Thanks
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
mrsatan said:
I've got some more. I'll add them when I get to work
Click to expand...
Click to collapse
Sure mate!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
Forgot to add that!! Thanks
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Between Do you think replacing .lge and mot in the above lines with semc will make them work ?? Just a thought
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Should it work on Acro S?
I tried it but I've got a cycle reboot. Maybe I'm doing something wrong?
I just edit and copy your lines to buid.prop.
UPD: I tried one more time and it's working
UPD: There is cycle reboot on acro S because of this line "dalvik.vm.heapsize=48m". The default line size is 256m. So, without this change the tweaks are working
Harsh7689 said:
Guys I've searched a lot of places and finally making a list of build.prop tweaks that can really help extending the battery, improve performance and so on.....
Here are they : (would keep updating as i find more)
General Performance
debug.sf.hw=1
Edit existing line,
dalvik.vm.heapsize=48m
persist.sys.ui.hw=1
Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Saves power
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=60
wifi.supplicant_scan_interval=180
Raises quality of images
ro.media.enc.jpeg.quality=90
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
Increased Media & Streaming Performance
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960 net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.evdo_b=4096,87380,256960,4096,1 6384,256960
Disable sending usage data
ro.config.nocheckin=1
To make the phone ring faster when dialing out
ro.telephony.call_ring.delay=0
Disable black screen issue after call
ro.lge.proximity.delay=25
mot.proximity.delay=25
Disable USB Debugging icon from Status Bar. (Just the Icon, debugging remains enabled.)
persist.adb.notify=0
Makes apps load faster and frees more ram. (Edit exsisting line)
dalvik.vm.dexopt-flags=m=v,o=y
Improve 3g data speeds
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Add any of these at the bottom of the build.prop using ES/ROOT explorer and save it..
Edit : Change the permissions to rw-r-r after edit (thanks to LenAsh).
Reboot
Click to expand...
Click to collapse
Thanks a lot dude.. Works !!
hi guys!
this setting are functioning with XPERIA P ICS?
Which are edits and which are new lines to write?
Sent from my LT26i using Tapatalk 2
leom81 said:
hi guys!
this setting are functioning with XPERIA P ICS?
Click to expand...
Click to collapse
Yea, should work with any android ics !!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
There's a thread for this already.
http://forum.xda-developers.com/showthread.php?t=1709836
Sent from my LT26i
papacarla said:
Should it work on Acro S?
I tried it but I've got a cycle reboot. Maybe I'm doing something wrong?
I just edit and copy your lines to buid.prop.
UPD: I tried one more time and it's working
Click to expand...
Click to collapse
How did you got your phone out of cycle boot?
Oh and if you add all these on the first page you get stuck at the Xperia loading logo
Sent from my LT26i using Tapatalk 2
Ben36 said:
Which are edits and which are new lines to write?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
You should check if it's exiting you have to edit it, if not then you have to write it
Ben36 said:
Oh and if you add all these on the first page you get stuck at the Xperia loading logo
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Try wiping cache in cwm.. Should work!!
av4tar said:
There's a thread for this already.
http://forum.xda-developers.com/showthread.php?t=1709836
Sent from my LT26i
Click to expand...
Click to collapse
Didn't knew it!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Harsh7689 said:
Try wiping cache in cwm.. Should work!!
Didn't knew it!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
doesn`t work
Just do advanced restore and do system only
Sent from my LT26i using Tapatalk 2
Harsh7689 said:
Yea, should work with any android ics !!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
you know, please, on what parameters affect the different lines?
General performance
debug.sf.hw = 1
Edit existing line,
dalvik.vm.heapsize = 48m
persist.sys.ui.hw = 1
faster Scrolling
ro.max.fling_velocity = 12000
ro.min.fling_velocity = 8000
Saves power
ro.ril.disable.power.collapse = 1
pm.sleep_mode = 1
windowsmgr.max_events_per_sec = 60
wifi.supplicant_scan_interval = 180
Raises quality of images
ro.media.enc.jpeg.quality = 90
ro.media.dec.jpeg.memcap = 8000000
ro.media.enc.hprof.vid.bps = 8000000
Increased Streaming Media & Performance
media.stagefright.enable-player = true
media.stagefright.enable-meta = true
media.stagefright.enable-scan = false
media.stagefright.enable-http = true
net.tcp.buffersize.default = 4096,87380,256960,4096, net.tcp.buffersize.wifi = 16384.256960 4096,87380,256960,4096,163 84.256960
net.tcp.buffersize.umts 4096,87380,256960,4096,163 = 84.256960
net.tcp.buffersize.gprs 4096,87380,256960,4096,163 = 84.256960
net.tcp.buffersize.edge 4096,87380,256960,4096,163 = 84.256960
net.tcp.buffersize.evdo_b 4096,87380,256960,4096,1 = 6384.256960
Makes apps load faster and frees more December ram. (Edit exsisting line)
dalvik.vm.dexopt-flags = m = v, o = y
Improve 3G data speeds
ro.ril.hsxpa = 2
ro.ril.gprsclass = 10
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
ro.ril.hsupa.category = 5
There are tons of build.prop tweaks on xda and other sites , this is useless because it has nothing new
This is my first post in the android development section. Hope you guys like it.
FEATURES :
* Better Battery
- Deep Sleep Mode
- Scans WiFi Less Frequently (Saves Battery)
* Image Quality Increased
* Streams Video Faster
* Better Touch Response
* Faster Reboot
* Instant Call
- No Delay In Receiving/Making Calls
* Faster Launcher
- No/Very Little Lag
- Forces Launcher Into Memory
* Fixes FC Issues With Some Apps
* Fixes “Black Screen” Issue After Call
- Screen Appears Almost Instantly After Pulling Phone Away From Face
* Audio & Video Quality Increased
* Signal Tweaks
* Download & Upload Speed Increased
* Dalvic VM Tweaks
* Loads App Faster
* Frees More RAM
* Overall Performance Increased
And Many More ...
Instructions :
1) Copy the build.prop from /system to your SD card, transfer it to your computer, open it with notepad ++.
2) Add the following lines to it :
#
ADDITIONAL_BUILD_PROPERTIES
#
debug.performance.tuning=1
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition. type =gpu
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Lock App In Memory
sys.keep_app_1=enter the package name of the app.
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
# No BootAnimation For Faster Reboot - Remove # Below To Enable
#debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
#ro.media.cam.preview.fps=0
3) Save the file & close.
4) Transfer the edited build.prop to your SD card.
5) Using root explorer, move it to /system, set permissions to rw--r-r-.
6) Reboot into recovery, wipe dalvic cache & reboot.
Done !
Note :
1) There are some experimental tweaks. To enable them, remove the # from the starting of the lines as stated.
2) DO NOT DELETE THE #AT THE LINE, EXPERIMENTAL TWEAKS.
3) There is a line that allows you to lock the launcher in memory. Enter the package name of the app/launcher you wanna lock there.
For example, the package name for Trebuchet is, com.cyanogenmod.trebuchet
4) If the line,
#
ADDITIONAL_BUILD_PROPERTIES
#
is already present in your original build.prop, just copy all the lines below it, other than it & paste them & follow the steps stated above.
Tested & working on CM10.1 beta7 by Wayland_ace !
Credits :
1) TopDroid for his original work.
2) Venomous Viper 119 ( me ) for sharing it here
If you want to use this in your ROM, don't even take my permission ! Just give credits to the right person, that's enough ! I'm just sharing it here !
Sent from my GT-S5830 using xda premium
There might be some flaws in the lines as these tweaks weren't made for ace remotely. I just tested & they worked. So I shared. Any corrections, I'm always happy to be noticed
Sent from my GT-S5830 using xda premium
why wont it work on other based roms like CM 7.2? lot of my stuff on CM 7.2 looks like that. just asking...
for proximity
mot. and lge. are for LG phones and motorola phones
they wont work
just a suggest
and all
ro.mot
ro.lge lines do not work
also the ril.htcmask wont have any affect
Sent from my S500 using xda app-developers app
benna said:
why wont it work on other based roms like CM 7.2? lot of my stuff on CM 7.2 looks like that. just asking...
Click to expand...
Click to collapse
You can give it a try. If it works then, great !
SpaceCaker said:
for proximity
mot. and lge. are for LG phones and motorola phones
they wont work
just a suggest
and all
ro.mot
ro.lge lines do not work
also the ril.htcmask wont have any affect
Thanks for your valuable suggestion ! Currently I've removed those lines from op. Can you please help me with the correct lines ?
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-S5830 using xda premium
Anyone tried the tweaks on other builds ? If yes, please report what changes have you noticed.
Sent from my GT-S5830 using xda premium
Since this is a share, shouldn't this thread be in the general section?
Code:
# DalvikVM tweaks
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-data-only=1
Xr01d_GT said:
Since this is a share, shouldn't this thread be in the general section?
Code:
# DalvikVM tweaks
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-data-only=1
Click to expand...
Click to collapse
As far as I know, only discussion threads & query threads for roms are posted in the general section (correct me if I'm wrong) . And these tweaks aren't purely shared, I had to remove some lines & make some adjustments to make them easily equipping/usable .
Sent from my GT-S5830 using xda premium
I am using all of these above and I fell sigificant improvement. Why all of these are not applied to ROMs? I used a bit of wifi, 2G, 3G, texts and a few calls and there is still 49% since 9a.m. uncharge. and the awake after sleep is boosted. I am really suprised with that and also worried why nobody comments and test???
Czepek said:
I am using all of these above and I fell sigificant improvement. Why all of these are not applied to ROMs? I used a bit of wifi, 2G, 3G, texts and a few calls and there is still 49% since 9a.m. uncharge. and the awake after sleep is boosted. I am really suprised with that and also worried why nobody comments and test???
Click to expand...
Click to collapse
First... I'm back on xda after a long time. Happy to be back . Well, many threads go down due to lack of scope like this here. Can't help
Sent from my GT-S5830 using xda premium
thx dude
koQQen said:
thx dude
Click to expand...
Click to collapse
If you really wanna say so, hit the button !
Sent from my GT-S5830 using xda premium
The suggested build.prop seems to be working really well for my Galaxy S2 i9100 with Dirty Unicorns rom 4.4. I was experiencing some really annoying delays and freezes with my phone, but after applying the new build.prop everything is working pretty much flawlessly! Big thanks to the author!
I just bricked my phone either i wasnt doing it properly or something btw does this work with the ace s5380i and if so can u make a video tutorial please.
Thanks in advance.
JAMDIZZY said:
I just bricked my phone either i wasnt doing it properly or something btw does this work with the ace s5380i and if so can u make a video tutorial please.
Thanks in advance.
Click to expand...
Click to collapse
The tweaks should work with ace-i. I'm sorry but I don't own the ace anymore, so no video tutorials
script replacement or edit to existing ?
hi,.
i've post few questions about tweaking build.prop here
http://forum.xda-developers.com/showthread.php?t=2351849&page=3#post59443281
would you mind to give some inputs to best settings and tweak suggestions
thanks
---------- Post added at 02:47 AM ---------- Previous post was at 02:03 AM ----------
which one should be the value of no boot ?
debug.sf.nobootanimation=0
or
debug.sf.nobootanimation=1
the boot of cyanogen initials its work and all developer should have initials boot right,.
for me in counts around 60 circulation before the home screen appears, is it normal ?
---------- Post added at 03:15 AM ---------- Previous post was at 02:47 AM ----------
I cant see the difference,.
which one should be picked and used for my solana ?
your script as following:
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
Top Droid as following:
persist.sys.use.dithering=1
Improves Screen Quality At The Cost Of Performance
---------- Post added at 03:40 AM ---------- Previous post was at 03:15 AM ----------
your value are the same with my build.prop from existing cm10.1 nightly solana
windowsmgr.max_events_per_sec=90
while topdroid values are:
windowsmgr.max_events_per_sec=275
your edit means no tweak for my solana, but is it best to increase the wait time into 275 ?
what do you suggest,.
Cm 10.1 not booting
Venomous Viper 119 said:
This is my first post in the android development section. Hope you guys like it.
FEATURES :
* Better Battery
- Deep Sleep Mode
- Scans WiFi Less Frequently (Saves Battery)
* Image Quality Increased
* Streams Video Faster
* Better Touch Response
* Faster Reboot
* Instant Call
- No Delay In Receiving/Making Calls
* Faster Launcher
- No/Very Little Lag
- Forces Launcher Into Memory
* Fixes FC Issues With Some Apps
* Fixes “Black Screen” Issue After Call
- Screen Appears Almost Instantly After Pulling Phone Away From Face
* Audio & Video Quality Increased
* Signal Tweaks
* Download & Upload Speed Increased
* Dalvic VM Tweaks
* Loads App Faster
* Frees More RAM
* Overall Performance Increased
And Many More ...
Instructions :
1) Copy the build.prop from /system to your SD card, transfer it to your computer, open it with notepad ++.
2) Add the following lines to it :
#
ADDITIONAL_BUILD_PROPERTIES
#
debug.performance.tuning=1
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition. type =gpu
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Lock App In Memory
sys.keep_app_1=enter the package name of the app.
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
# No BootAnimation For Faster Reboot - Remove # Below To Enable
#debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
#ro.media.cam.preview.fps=0
3) Save the file & close.
4) Transfer the edited build.prop to your SD card.
5) Using root explorer, move it to /system, set permissions to rw--r-r-.
6) Reboot into recovery, wipe dalvic cache & reboot.
Done !
Note :
1) There are some experimental tweaks. To enable them, remove the # from the starting of the lines as stated.
2) DO NOT DELETE THE #AT THE LINE, EXPERIMENTAL TWEAKS.
3) There is a line that allows you to lock the launcher in memory. Enter the package name of the app/launcher you wanna lock there.
For example, the package name for Trebuchet is, com.cyanogenmod.trebuchet
4) If the line,
#
ADDITIONAL_BUILD_PROPERTIES
#
is already present in your original build.prop, just copy all the lines below it, other than it & paste them & follow the steps stated above.
Tested & working on CM10.1 beta7 by Wayland_ace !
Credits :
1) TopDroid for his original work.
2) Venomous Viper 119 ( me ) for sharing it here
If you want to use this in your ROM, don't even take my permission ! Just give credits to the right person, that's enough ! I'm just sharing it here !
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
i did your tweek on cm 10.1 p3100 but unfortunately i am stuck at boot
jspdjanggo said:
hi,.
i've post few questions about tweaking build.prop here
http://forum.xda-developers.com/showthread.php?t=2351849&page=3#post59443281
would you mind to give some inputs to best settings and tweak suggestions
thanks
---------- Post added at 02:47 AM ---------- Previous post was at 02:03 AM ----------
which one should be the value of no boot ?
debug.sf.nobootanimation=0
or
debug.sf.nobootanimation=1
the boot of cyanogen initials its work and all developer should have initials boot right,.
for me in counts around 60 circulation before the home screen appears, is it normal ?
---------- Post added at 03:15 AM ---------- Previous post was at 02:47 AM ----------
I cant see the difference,.
which one should be picked and used for my solana ?
your script as following:
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
Top Droid as following:
persist.sys.use.dithering=1
Improves Screen Quality At The Cost Of Performance
---------- Post added at 03:40 AM ---------- Previous post was at 03:15 AM ----------
your value are the same with my build.prop from existing cm10.1 nightly solana
windowsmgr.max_events_per_sec=90
while topdroid values are:
windowsmgr.max_events_per_sec=275
your edit means no tweak for my solana, but is it best to increase the wait time into 275 ?
what do you suggest,.
Click to expand...
Click to collapse
If the lines are same as in you ROM's default build.prop, just delete the ones from my tweaks. The no boot animation line just disables the boot animation on startup. In other words, you don't see the boot animation. This line has nothing to do with the boot time. The boot time depends on your apps and settings.
Sent from my Nexus 5 using Tapatalk
applesaw said:
i did your tweek on cm 10.1 p3100 but unfortunately i am stuck at boot
Click to expand...
Click to collapse
Some lines must be conflicting. Just delete them and you'll be good to go!
Sent from my Nexus 5 using Tapatalk