I think i'm in huge trouble here.
last night i tried to port a rom through dsixda kitchen, followed every instruction correctly.
then flashed that rom on my canvasHD, it didn't work.
so i restored my backup through CWM, the phone started but there was no imei & it was also stating unknown baseband.
so i followed this tutorial to fix it --> http://www.youtube.com/watch?v=s_ksRQjlh_4
after formating it showed the window with the green ring, but after that when i clicked on download it did not detect my phone,
and now it's not even powering up.
is there anything that can be done to bring my canvas hd back to life.
now is the time when i really need your help, plz tell me what i should do .
keanu_ritz said:
I think i'm in huge trouble here.
last night i tried to port a rom through dsixda kitchen, followed every instruction correctly.
then flashed that rom on my canvasHD, it didn't work.
so i restored my backup through CWM, the phone started but there was no imei & it was also stating unknown baseband.
so i followed this tutorial to fix it --> http://www.youtube.com/watch?v=s_ksRQjlh_4
after formating it showed the window with the green ring, but after that when i clicked on download it did not detect my phone,
and now it's not even powering up.
is there anything that can be done to bring my canvas hd back to life.
now is the time when i really need your help, plz tell me what i should do .
Click to expand...
Click to collapse
Are the drivers installed properly on your PC?
I would recommend uninstalling it and than installing it again.
I faced a problem when it was not detecting my CHD too and when I checked the device manager the drivers were gone.
sskullcrusherr said:
Are the drivers installed properly on your PC?
I would recommend uninstalling it and than installing it again.
I faced a problem when it was not detecting my CHD too and when I checked the device manager the drivers were gone.
Click to expand...
Click to collapse
yes the drivers are properly installed.
the phone is not starting even with the battery attached to it, it's just not powering up:crying::crying::crying:
keanu_ritz said:
yes the drivers are properly installed.
the phone is not starting even with the battery attached to it, it's just not powering up:crying::crying::crying:
Click to expand...
Click to collapse
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
sskullcrusherr said:
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
:victory::victory::victory::victory::victory: :victory::victory::victory:
:highfive::highfive::highfive::highfive::highfive::highfive::highfive:
You are just awesome @sskullcrusherr!!!!!!!!!
thank you so much for this timely help , i seriously cannot describe in words what a big help you have been!!!!!
also a big thanks to @yuweng who posted that thread!!!!
Thanks to your help, My "Black Pearl" (My canvas HD) is back from the "Davy Jones Locker" :- Captain RiTz
:victory::victory::victory::victory::victory: :victory::victory::victory::victory::victory:
keanu_ritz said:
:victory::victory::victory::victory::victory: :victory::victory::victory:
:highfive::highfive::highfive::highfive::highfive::highfive::highfive:
You are just awesome @sskullcrusherr!!!!!!!!!
thank you so much for this timely help , i seriously cannot describe in words what a big help you have been!!!!!
also a big thanks to @yuweng who posted that thread!!!!
Thanks to your help, My "Black Pearl" (My canvas HD) is back from the "Davy Jones Locker" :- Captain RiTz
:victory::victory::victory::victory::victory: :victory::victory::victory::victory::victory:
Click to expand...
Click to collapse
Glad that your CHD is alive again
Thanks a ton. This worked for me ad well. Got a few tries before I actually got the right driver
garynsa said:
Thanks a ton. This worked for me ad well. Got a few tries before I actually got the right driver
Click to expand...
Click to collapse
You're welcome. Hope this helps others too.
Give this a try
Dont worry just Carry on with SP flashtool way , it neither requires your battery to be in , neither your mobile to be on while flashing . take a latest version of canvas HD 4.2.1 official release , and brush it the way provided in flashing tutorial .
Hope this help . . Get back if more help needed.
sskullcrusherr said:
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Thanks for the share... Bookmarking it for future reference
What can do after intall sp tool...for revover imei
Sent from my Micromax A116 using xda premium
---------- Post added at 05:24 AM ---------- Previous post was at 05:21 AM ----------
By using engnring mode facing problem command not send
Sent from my Micromax A116 using xda premium
Sent from my Micromax A116 using xda premium
Related
Hi,
These are my video tutorials to Root/Unroot the Canvas HD A116.
1. Root
2. Unroot
Hope this helps.
Regards,
Ash
www.cursed4eva.com
Root MMX A116 HD
Hi,
Is it possible to root MMX A116 by SuperOneClick.
Porselvan said:
Hi,
Is it possible to root MMX A116 by SuperOneClick.
Click to expand...
Click to collapse
hi
im not sure but i was told that one clickroot works just Google it and u will see in the same site they say it works for MMXA116:laugh:
facing battery problem after rooting canvas hd
guys i am using canvas hd for the past 1 month.. recently i rooted it.. rooting was successful since i followed xda root method. But since rooting i am facing a serious battery performance issue... earlier before rooting i could use my for continuously at a stretch of 7 hours but now the battery goes down in 4 hours itself.. has rooting got to do anything with it?? also i have not installed any root requiring apps yet on my phone... my usage is same as it was before rooting.. kindly help...
sp flash tool error (8200)
please help
rishikeshkorde said:
guys i am using canvas hd for the past 1 month.. recently i rooted it.. rooting was successful since i followed xda root method. But since rooting i am facing a serious battery performance issue... earlier before rooting i could use my for continuously at a stretch of 7 hours but now the battery goes down in 4 hours itself.. has rooting got to do anything with it?? also i have not installed any root requiring apps yet on my phone... my usage is same as it was before rooting.. kindly help...
Click to expand...
Click to collapse
No. Rooting has nothing to do with it. root just unlocks the phone and lets you access/modify the system files. Root itself does ABSOLUTELY NOTHING.
harshdoshi25 said:
No. Rooting has nothing to do with it. root just unlocks the phone and lets you access/modify the system files. Root itself does ABSOLUTELY NOTHING.
Click to expand...
Click to collapse
Can you please help me:crying:
haree said:
hi
im not sure but i was told that one clickroot works just Google it and u will see in the same site they say it works for MMXA116:laugh:
Click to expand...
Click to collapse
Hi,
Earlier I was not able to root by this method. But now cracked it using the same method. I was not able to make my phone getting detected in SP Flash tools.
It needs you to give run as admin even though you are logged In as admin. Anyway got it rooted. Thanks a lot for the response.....
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 02:07 PM ---------- Previous post was at 02:03 PM ----------
Just run the flash tool as administrator, did the job for me. Earlier was facing the same issue. Just follow the video as it is you should be able to root it.
Sent from my Micromax A116 using xda app-developers app
How can i root using TWRP recovery?
Can i use this same method to root using TWRP? some say the auto root feature does not work. how can i root my hd using twrp? Is there a different Procedure to do? pls give me the steps.. pls help.. thx in advance..
USE SP_Flash_Tool_v3.1304.0.119
IT WORKS
root problems
hey, i rooted my canvas hd and now i'm facing a problem. the problem is that my phone is not detecting the sim cards after rooting. please help me out, its urgent~ Thanks in advance.
Are u sure that nothing else is different? The same method is used for twrp?
Solution: SP FLASH TOOL ERROR: ( 8200 )
For those who are facing issues with the SP Flash Tool error, where in your Phone is recognized by the Flash tool but towards the end it shows incompatibility, all you need to do is uodate to the latest SP Flash tool - SP_Flash_Tool_v3.1248.0.96. Hit thanks if this helped
---------- Post added at 12:17 PM ---------- Previous post was at 12:12 PM ----------
fuddadu said:
please help
Click to expand...
Click to collapse
Just update to the recent version of SP Flash Tools. I had faced the same issue, updating the Flash Tool did the trick for me
fuddadu said:
please help
Click to expand...
Click to collapse
i had exactly same prob , i updated to sp flash tool v 3.1304.xx
chrisjzach said:
hey, i rooted my canvas hd and now i'm facing a problem. the problem is that my phone is not detecting the sim cards after rooting. please help me out, its urgent~ Thanks in advance.
Click to expand...
Click to collapse
Check IMEI numbers under About Phone Information. If IMEI are showing as "unknown" then it is serious problem.
There is IMEI repair thread also, but it did not work for my friend. May be it will work for you. My friend had to send phone to Service Center.
Not me, but experts here say that is not safe to use Clockworkmod (CWM) which give weird problem and they advised to use "TWRP".
Anyways best of luck to you.:good:
Unsuccessful rooting of canvas hd
I dedicated my whole work into canvas while rooting...! I followed every simple step u said.... Drivers installed.... su. Bin n super users r transfered to the internal memory... Runned sp flash tool as an administrator..... Everything as u said.. N also debugging mode was also switched on..! I connected the mob without the battery... N started Using flashing tool I did the process as u said..! But after all these also my phone not getting rooted... It's not even detected..! So I used that alternated file u said too download from tt something called gogl/ something like this... Even that isn't working... N after this unsuccessful thing.. Now my apps r crashing.!.... Plz suggest me wat. To do...! Plz Plz Plz n my mob is brand new..! - micromax canvas Hd.
Follow this method!!!!
Muskinjola said:
I dedicated my whole work into canvas while rooting...! I followed every simple step u said.... Drivers installed.... su. Bin n super users r transfered to the internal memory... Runned sp flash tool as an administrator..... Everything as u said.. N also debugging mode was also switched on..! I connected the mob without the battery... N started Using flashing tool I did the process as u said..! But after all these also my phone not getting rooted... It's not even detected..! So I used that alternated file u said too download from tt something called gogl/ something like this... Even that isn't working... N after this unsuccessful thing.. Now my apps r crashing.!.... Plz suggest me wat. To do...! Plz Plz Plz n my mob is brand new..! - micromax canvas Hd.
Click to expand...
Click to collapse
Dude follow this method it just takes min to root ur phone without removing ur battery and stuffs
give a try heres the link http://forum.xda-developers.com/showthread.php?t=2292971
---------- Post added at 10:39 AM ---------- Previous post was at 10:07 AM ----------
Porselvan said:
Hi,
Is it possible to root MMX A116 by SuperOneClick.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2635922
check out this link
---------- Post added at 10:40 AM ---------- Previous post was at 10:39 AM ----------
Porselvan said:
Hi,
Is it possible to root MMX A116 by SuperOneClick.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2635922
check out this link
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
haree said:
hi
im not sure but i was told that one clickroot works just Google it and u will see in the same site they say it works for MMXA116:laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2635922
heres the link for one click root
PRESS THANKS IF THIS HELPED
unrooting canvas hd
hiii
i have canvas hd phone and i rooted it with superuser su app and flashed galaxy chd rom(downloaded from xda forum)
now i want to unroot phone and want it to be as factory reseted with original rom with 4.1.1
anybody please help me
mail me - [email protected]
---------- Post added at 11:36 AM ---------- Previous post was at 11:29 AM ----------
hiii
i have canvas hd phone and i rooted it with superuser su app and flashed galaxy chd rom(downloaded from xda forum)
now i want to unroot phone and want it to be as factory reseted with original rom with 4.1.1
anybody please help me
mail me - [email protected]
piyali said:
hiii
i have canvas hd phone and i rooted it with superuser su app and flashed galaxy chd rom(downloaded from xda forum)
now i want to unroot phone and want it to be as factory reseted with original rom with 4.1.1
anybody please help me
mail me - [email protected]
Click to expand...
Click to collapse
this should help you.
http://yoyovirus.blogspot.in/2013/05/requirements-canvas-hd-drivers-download.html?m=1
sim card not ditected
i rooted my phone and installed
s5 rom as advised... but sim card is not detecting,,,....plz help me out
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Flash the stock firmware
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flash the stock firmware
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
how could you explain??
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
know that
but how to do flashing????
could u xplain me the steps
thank u
Flashing a firmware is different with every model of phone,try to search in google and flash the micromax's stock rom
Sent from my LG-P880 using xda premium
Found any solution to this?
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Egg Yolk said:
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Click to expand...
Click to collapse
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Any luck with your A101
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
Hi bishu any luck with your A101
Correct me if I am wrong but you started facing issues after you flashed the JB rom
Also I dont see anywhere the rom you flashed was meant for A101.
you can try this for firmware
http://forum.gsmhosting.com/vbb/f81...all-flash-file-only-here-mega-thread-1624105/
let me know if it works else I will take a back up of my ROM and upload :good:
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
thanks
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
hi thanks is0l4ted
thanks for detailed help
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Owh really did they?? I wonder with Doubt as MTK Devices are Un-Brickable btw..
hossori was
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Like I tried all these different ROMs on xperia x10 mini pro u20i, upgraded it to JB 4.1.2, and its working fine, and all these were possible because of Sony's PC Companion that helped me to get my phone out of boot loops an all, now since I don't have that kinda apps for Micromax's A101 (not even in there official site) is there any other way where I can bring the fone back to its factory settings if anything goes wrong while custom rom installation or upgradation from ICS 4.0.4 to JB 4.2 or 4.3. (I already have those drivers and tools for A101 that was there mentioned though.However I never got those driver files in the phone when I bought it though)
If yes please let me know bout a- the best kernel for A101
b- JB 4.2 or 4.3 (preferably) ROM plus and GAPPS required
c- The stock kernel or some application like Sony has update service app for sony phones(u knw just in case..)
Thanks a lot to all of you guys and to the forum, I never thought my xperia mnini pro can run JB before, I started likeing my fon again and its all because of you guys.
How to root micromax A101
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
crptox31 said:
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
Click to expand...
Click to collapse
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Thanks
Bishumoharana said:
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Click to expand...
Click to collapse
Thanks Man!!
crptox31 said:
Thanks Man!!
Click to expand...
Click to collapse
did it worked??
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Believe me! Nothing is wrong with your device! Just flash the stock ROM back and that's it...
Kitkat Rom for micromax
I have finally rooted my phone and i can't find kitkat rom for micromax a101.
One website says it has the rom
but when try downloading it, the website asks to complete the survey
after completing the survey nothing happens and no file is downloaded.
If anyone has the kitkat rom please upload it on media fire. I urgently need it.
:silly:
hit thanks if I helped you
Problem ?
tejasjani55 said:
hit thanks if I helped you
Click to expand...
Click to collapse
Could you be more specific on what is your problem ?
I have updated canvasHD to 4.2.1 official,due to TPupgrade my touch is not working,any solution?
tejasjani55 said:
I have updated canvasHD to 4.2.1 official,due to TPupgrade my touch is not working,any solution?
Click to expand...
Click to collapse
Kindly post what type of upgrading you've done.
and state all the process that you did.
basic troubleshooting requires documentation.
If you flashed the upgrade through CWM, try to do a full wipe and reflash it again.
After flashing is complete, reboot and don't you dare touching the screen (just don't touch the phone) during TP upgrade.
usually that is the cause of the problem.
Good if you are lucky !!!
tejasjani55 said:
I have updated canvasHD to 4.2.1 official,due to TPupgrade my touch is not working,any solution?
Click to expand...
Click to collapse
If anybody has a back up of their canvas HD touch calibration taken through Maui Meta I guess it can be restored back in the phone which has failed TP upgrade. Or if some one has a perfectly working canvas HD a back up of touch calibration can be taken and the back up can be restored back in the phone which has failed TP upgrade. No guarantee if its gonna work as its not tested. Good luck.
-Proud member of XDA
How to do that backup and restore?or any other solutions
Unfortunate
tejasjani55 said:
How to do that backup and restore?or any other solutions
Click to expand...
Click to collapse
Unfortunately I had been to the MMX service center yesterday and surprisingly the techs are not well trained, they are not sure what caused the problem. Their solution was for me to change the touch panel which would cost Rs.2500, But i repeatedly told them its due to TP upgrade failure but I dont think they understood. I am stuck and have no way as of now.
tejasjani55 said:
I have updated canvasHD to 4.2.1 official,due to TPupgrade my touch is not working,any solution?
Click to expand...
Click to collapse
Try reflashing the 4.2 stock rom through sp flash tool and your device should be fine.If you want you can refer to this http://forum.xda-developers.com/showthread.php?t=2471747
Tried already
ashwin1212 said:
Try reflashing the 4.2 stock rom through sp flash tool and your device should be fine.If you want you can refer to this http://forum.xda-developers.com/showthread.php?t=2471747
Click to expand...
Click to collapse
I have flashed the stock rom several times by now and no use
---------- Post added at 07:28 AM ---------- Previous post was at 07:24 AM ----------
tejasjani55 said:
How to do that backup and restore?or any other solutions
Click to expand...
Click to collapse
I had found this video but its blurry... All the best :good: http://www.youtube.com/watch?v=DtWQ-SoE2YA
- Proud member of XDA
Then try downgrading to 4.1 and hopefully that should work
Sent from my A116 using XDA Premium 4 mobile app
Lets try
ashwin1212 said:
Then try downgrading to 4.1 and hopefully that should work
Sent from my A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
May be i will try it during the weekend !! Where do I find the stock rom 4.1.2 for canvas HD ?
here you can find and downgrade your canvas to official stock 4.1.2 version 2.just follow this video http://m.youtube.com/watch?v=b4Kkj_R9Rq8&desktop_uri=/watch?v=b4Kkj_R9Rq8
Sent from my A116 using XDA Premium 4 mobile app
ashwin1212 said:
Then try downgrading to 4.1 and hopefully that should work
Sent from my A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how to downgrading 4.2.1 to 4.1.2 in a116 plz help its urgent
tried it all.
sir, i have the same problem. and downgrading from 4.2 to 4.1 DOESNT FIX the problem. i've tried it.
i've also tried upgrading to 4.2.1 but still , that doesnt fix the prob. tried entering factory mode and manually do TP Upgrade but it says,
"Firmware bin failed." it means that the firmware of our touch panel have been corrupted.
i have flashed stock 4.1 and 4.2 Rom via spflash and still that didnt FIX.
only option left for me now is to bring it to service center.
how i wish someone can fix this.
The lag is because of the consumption of resources through the apks..
There is a simple solution to it:
1- If you are on stock ROM and rooted try uninstalling the Stock bloatware>Beware this may brick your device if uninstalled system apks.
2- Try using a different launcher not saying that the stock launcher is bad but give it a shot to NOVA or Apex launcher.
3- Go in Settings-Developer Options and change the Window, Transition,& Animator duration scale to 0.5 or OFF!!
4- Go on play store and search Seeder And Greenify - It works and saves battery too.
Hope these tips MAY help Keep Me Posted !!
If helped Don't Forget To Click The THANKS button !!!!:good:
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Take it to your nearest service center....I too did it before.
here
desmond16feb said:
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Click to expand...
Click to collapse
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
thanks but
slogger001 said:
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
Click to expand...
Click to collapse
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
windows version ?
desmond16feb said:
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
Click to expand...
Click to collapse
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
slogger001 said:
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
Click to expand...
Click to collapse
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Wor
desmond16feb said:
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Click to expand...
Click to collapse
I think its because of wrong scatter file try downloading ur rom from other site may help u
hello .. is there anybody who can supply the correct 3 tools for flashing the stock rom of canvas HD i.e. sp flash tools, 14 flasher user ROM & especially the drivers. pls. help immediately as i bricked the device recently.
alex279 said:
hello .. is there anybody who can supply the correct 3 tools for flashing the stock rom of canvas HD i.e. sp flash tools, 14 flasher user ROM & especially the drivers. pls. help immediately as i bricked the device recently.
Click to expand...
Click to collapse
all three things can be found at http://www.moulnisky.com
my old friend
edwardpage said:
all three things can be found at http://www.moulnisky.com
Click to expand...
Click to collapse
Hey man i am the one whom you have reviewed recently on the thread"pls. Help to fix swapping issue on canvas HD". Pls. Give the correct drivers which you got after googling on the web & flashed that with your device. Pls. If possible give the link of those sites....
alex279 said:
Hey man i am the one whom you have reviewed recently on the thread"pls. Help to fix swapping issue on canvas HD". Pls. Give the correct drivers which you got after googling on the web & flashed that with your device. Pls. If possible give the link of those sites....
Click to expand...
Click to collapse
http://gsm-panda.blogspot.com/2014/...ml?utm_source=dlvr.it&utm_medium=facebook&m=1
download from here and then install from the folder "new inst win7&8x64"
its empty
edwardpage said:
http://gsm-panda.blogspot.com/2014/...ml?utm_source=dlvr.it&utm_medium=facebook&m=1
download from here and then install from the folder "new inst win7&8x64"
Click to expand...
Click to collapse
there is nothing in the rar folder which i downloaded from the 4shared.com or even using the app too.pls. reply.
alex279 said:
there is nothing in the rar folder which i downloaded from the 4shared.com or even using the app too.pls. reply.
Click to expand...
Click to collapse
there is a link to the drivers in this thread...
http://forum.xda-developers.com/micromax-a116/help/phone-bricked-t2810634
a little help
edwardpage said:
there is a link to the drivers in this thread...
http://forum.xda-developers.com/micromax-a116/help/phone-bricked-t2810634
Click to expand...
Click to collapse
in the post where mr. shivrajsingh post the drivers i dont understand whats the process he is describing at the last portion of that thread, can u pls. describe me when to follow these rules & for what !!!!!!!!!!!
alex279 said:
in the post where mr. shivrajsingh post the drivers i dont understand whats the process he is describing at the last portion of that thread, can u pls. describe me when to follow these rules & for what !!!!!!!!!!!
Click to expand...
Click to collapse
they need not be followed...just install the drivers..and you are good to go..
its still frustrating ....
edwardpage said:
they need not be followed...just install the drivers..and you are good to go..
Click to expand...
Click to collapse
Pls. If possible download the rar file you suggested which is showing 11Kb on my download manager. Iam telling this because there is nothing to install but three file having couple of written things which are opening through note pad(sizes-4kb each). Also i must mention here that i m using a win8 pc. Pls. Man help......
alex279 said:
Pls. If possible download the rar file you suggested which is showing 11Kb on my download manager. Iam telling this because there is nothing to install but three file having couple of written things which are opening through note pad(sizes-4kb each). Also i must mention here that i m using a win8 pc. Pls. Man help......
Click to expand...
Click to collapse
yes it is only 11 kb...u will have to follow the steps in that thread to install these...
or
just Google All mtk drivers and download the setup...it will be approx 14 mb..
edwardpage said:
yes it is only 11 kb...u will have to follow the steps in that thread to install these...
or
just Google All mtk drivers and download the setup...it will be approx 14 mb..
Click to expand...
Click to collapse
The first part is general for flashing in the thread where the driver links was given but i asked what the second part is all about in the previous thread. i dont know which steps to follow to install the drivers pls. dont hesitate & explain me stepwise....i already googled before about this & then start this this thread & install 5-6 drivers{but no one among them is of 14mb} but nothing works pls. if you use that specific one pls. post. Is drivers are windows 8 compatible or not ????? pls. reply man..my device is bricked since 2 long long weeks
alex279 said:
The first part is general for flashing in the thread where the driver links was given but i asked what the second part is all about in the previous thread. i dont know which steps to follow to install the drivers pls. dont hesitate & explain me stepwise....i already googled before about this & then start this this thread & install 5-6 drivers{but no one among them is of 14mb} but nothing works pls. if you use that specific one pls. post. Is drivers are windows 8 compatible or not ????? pls. reply man..my device is bricked since 2 long long weeks
Click to expand...
Click to collapse
I wil giv u a tutorial on how to install the 11kb drivers..
turn off ur device..remove battery and sim cards...now open device manager on ur computer and keep the window open.. connect the phone to the computer...it will appear in the device manager in unknown devices with a yellow question mark...right click on the device and select update driver... select update manually and give the location of the 11kb driver folder...it will update and u r done...
I successfully flashed the v5 stock ROM & as i knew the bug is Windows 8 but now my device is showing A116i & battery % is also abnormal. Pls help if its a weird issue
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
I successfully flashed the v5 stock ROM & as i knew the bug is Windows 8 but now my device is showing A116i & battery % is also abnormal. Pls help if its a weird issue
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes the V5 shows model no. as A116i...that is normal...
and abt the battery %age...don't worry...the backup is still the same...
pls suggest me how i can download the correct drivers.
ok...........
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
which windows version u r using