Allwinner A10 Driver problems - Android Q&A, Help & Troubleshooting

ino this has maybe been up other times, but i searched and searched and searched, but nuth seems to work, and i am going crazy here.
bcs i tried Livesuit version 1.06, 1.09 and 1.1.1 everytime i get these 2 errors on my Windows 7 Ultimate SP1 64bit, and i tried my dad's laptop, different cables but i keep ending up with:
"This device cannot start. (Code 10)" and "Windows has stopped this device because it has reported problems. (Code 43)"
and if i can finally get a computer to read the tablet i get this error in Livesuit: Upgrade fails : 0x162 ÉÕдʧ°Ü2
i hope someone can help me out here, i tired installing CWM from this thread: http://forum.xda-developers.com/showthread.php?t=2189640
it installed fine, but when CWM starts i get this error (and yes i got the original rom erased so i can't boot into ICS anymore :crying
E:can't mount /cache/recovery/command
E:can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
i hope a friendly soul here on xda can help me out.
only way i can get it to look like this is when i reboot from CWM and hold vol. down while connecting the power cable but then Livesuit don't pick it up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

puma99dk| said:
ino this has maybe been up other times, but i searched and searched and searched, but nuth seems to work, and i am going crazy here.
bcs i tried Livesuit version 1.06, 1.09 and 1.1.1 everytime i get these 2 errors on my Windows 7 Ultimate SP1 64bit, and i tried my dad's laptop, different cables but i keep ending up with:
"This device cannot start. (Code 10)" and "Windows has stopped this device because it has reported problems. (Code 43)"
and if i can finally get a computer to read the tablet i get this error in Livesuit: Upgrade fails : 0x162 ÉÕдʧ°Ü2
i hope someone can help me out here, i tired installing CWM from this thread: http://forum.xda-developers.com/showthread.php?t=2189640
it installed fine, but when CWM starts i get this error (and yes i got the original rom erased so i can't boot into ICS anymore :crying
E:can't mount /cache/recovery/command
E:can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
i hope a friendly soul here on xda can help me out.
only way i can get it to look like this is when i reboot from CWM and hold vol. down while connecting the power cable but then Livesuit don't pick it up
Click to expand...
Click to collapse
Any luck resolving this???

cr3at1ve said:
Any luck resolving this???
Click to expand...
Click to collapse
nope, i basicly just have it as a paper weight bcs the crappy chinese flash program don't accept any rom i can find for the All-whiner tablet

puma99dk| said:
nope, i basicly just have it as a paper weight bcs the crappy chinese flash program don't accept any rom i can find for the All-whiner tablet
Click to expand...
Click to collapse
Did you check out techknow.me there seem to be a lot of roms for the allwinner devices there.

cr3at1ve said:
Did you check out techknow.me there seem to be a lot of roms for the allwinner devices there.
Click to expand...
Click to collapse
i tired some from techknow.me but i ended up with the "chinese" flash program comes up with the some error as in post #1 so i am pretty much stock with a paper weight bcs i wanted to have Jelly Bean on the china-let instead of ICS bcs it's just runs better.

Related

[Q] Is there any way to flash cache.img using odin or CWM?

Hi all
Is there any way to flash a cache file in the form of (cache.img) to my phone using odin or CWM ?
I was able to do that via fastboot ,but it seems that samsung devices has not ability to connect via fasboot
picture :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thank you ^_^ ♥
Why ?
MistahBungle said:
Why ?
Click to expand...
Click to collapse
to fix this in some phones
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open/cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open/cache/recovery/last_log
it was the only solution that worked for me ...
Ahhh OK. No, not with Odin. But possibly with ADB. Never done it myself so if someone doesn't come along soonish & tell you how to do it/if it can be done or not, a bit of research or experimenting might yield some answers.
MistahBungle said:
Ahhh OK. No, not with Odin. But possibly with ADB. Never done it myself so if someone doesn't come along soonish & tell you how to do it/if it can be done or not, a bit of research or experimenting might yield some answers.
Click to expand...
Click to collapse
i have searched the web before i post this...
i did not find anything helpful
& If I'm not wrong there is no ability to flash anything using ADB ,but you can do so using fastboot...
can you answer this question please :
is their an ability to connect samsung devices via fasboot ?? or only ABD ?
thank you for the attention
Adelm2013x said:
i have searched the web before i post this...
i did not find anything helpful
& If I'm not wrong there is no ability to flash anything using ADB ,but you can do so using fastboot...
can you answer this question please :
is their an ability to connect samsung devices via fasboot ?? or only ABD ?
thank you for the attention
Click to expand...
Click to collapse
Search about sdk
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Search about sdk
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i already have it ,android software development kit
but what to do with it to done the job that i need ?
thanks
Adelm2013x said:
i already have it ,android software development kit
but what to do with it to done the job that i need ?
thanks
Click to expand...
Click to collapse
Ok leave that.
Follow this easy guide
http://forum.xda-developers.com/showthread.php?t=2277112
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok leave that.
Follow this easy guide
http://forum.xda-developers.com/showthread.php?t=2277112
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i know that ,but If I'm not wrong there is no "fastboot" for samsung devices ! there is only ADB.
now i found this page that supports my think
http://android.stackexchange.com/questions/27034/samsung-galaxy-s3-with-fastboot
The Samsung Galaxy SIII does not have fastboot mode, unfortunately.
Click to expand...
Click to collapse
also i tried it , i set my phone on download mode & typed the following but the device is not detected ..
but when i set my phone in recovery or at normal mode (system is loaded) i can communicate with my phone via ADB
so now how can i flash the cache.img ???
thank you very much
i am still need the help

[Q] Odin Flash Fails, Bootloop, Block Device etc on recovery Help

up up up up please..
E: cant open /cache/recovery/last install
failed to ount /cache ( no such file or directory
make_extf4fs failed on .dev/block/mmcblkop12
BLOCK DEVICE REQQUIRED
- my phone is on stock not rooted, etc
my auntie updated the phone and then she didnt finish the update, and after that stock on bootloop
i try to flash it via odin with stock firmware, but always failed, almost 3 firmware i tested but still the same
i already tried to flash CWM recovery and Kernels but all failed,
how to revive my phone
when im on stock recovery i saw this
up up up up please..
E: cant open /cache/recovery/last install
failed to ount /cache ( no such file or directory
make_extf4fs failed on .dev/block/mmcblkop12
(BLOCK DEVICE REQUIRED)
can i ask advice on how to revive my s3, a lot of thanks for your reply
Here are some of my SS on odin, by changing USB cables etc, com ports
View attachment 2641600
View attachment 2641601
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 2641603
thank you
Try the rescue firmware, else a new motherboard.
Sent from my GT-I9300 using Tapatalk
keisserjohn said:
up up up up please..
E: cant open /cache/recovery/last install
failed to ount /cache ( no such file or directory
make_extf4fs failed on .dev/block/mmcblkop12
BLOCK DEVICE REQQUIRED
- my phone is on stock not rooted, etc
my auntie updated the phone and then she didnt finish the update, and after that stock on bootloop
i try to flash it via odin with stock firmware, but always failed, almost 3 firmware i tested but still the same
i already tried to flash CWM recovery and Kernels but all failed,
how to revive my phone
when im on stock recovery i saw this
up up up up please..
E: cant open /cache/recovery/last install
failed to ount /cache ( no such file or directory
make_extf4fs failed on .dev/block/mmcblkop12
(BLOCK DEVICE REQUIRED)
can i ask advice on how to revive my s3, a lot of thanks for your reply
thank you
Click to expand...
Click to collapse
Follow the exact process how to use ODIN and flash firmware. You can check in youtube. I hope it sud solve your issue. The phone must be detected first by your laptop/desktop for starting the ODIN flash
KSKHH said:
Follow the exact process how to use ODIN and flash firmware. You can check in youtube. I hope it sud solve your issue. The phone must be detected first by your laptop/desktop for starting the ODIN flash
Click to expand...
Click to collapse
i almost flash firmware using via odin in diff samsung phones but now actually all fails, even i change USB cable and comp ports,
check this SS
View attachment 2641516
this is the photo of the phone in just recovery mode
boomboomer said:
Try the rescue firmware, else a new motherboard.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
what kind of rescue firmware?
maybe its not a hardware problem, it says at the recovery that is missing cache recovery logs etc, and last install
actually this problem occur when 1st updating to a new software update, den actually not finished and shutdown the phone
after we on the phone the problem exist that is bootloop, i also try wiping/format phone using stock recovery
....Stuck?
keisserjohn said:
i almost flash firmware using via odin in diff samsung phones but now actually all fails, even i change USB cable and comp ports,
check this SS
View attachment 2641516
View attachment 2641517
this is the photo of the phone in just recovery mode
View attachment 2641522
Click to expand...
Click to collapse
As i know about your system, this is just you don't have the stock rom, you have to flash stock rom using odin, or go here --> http://forum.xda-developers.com/showpost.php?p=32273406

Help with soft-bricked MXQ S805, blue light but no HDMI out (black screen)

I soft bricked my box and now I've got no video output and the USB doesn't get recognized in any circunstance,
I'm trying to to short the NAND pins but apparently it's not working since the box never shows up under the
device manager/burning tool.
Any hints?
HD180_V14
2015/12/21
S805-V1.0-SD0-20151223
S805-D-8188
I have the same issue. No hdmi/AV output and Blur light on constant. I wasnt sure if it was bricked or not. I can reflash if thats waht it takes but I do not know procedure or where to get the version 4.4 from.
I found this thread which is pretty straight forward just need the files.
https://forum.xda-developers.com/an.../firmware-upgrade-guide-amlogic-s805-t3323358
grod777 said:
I have the same issue. No hdmi/AV output and Blur light on constant. I wasnt sure if it was bricked or not. I can reflash if thats waht it takes but I do not know procedure or where to get the version 4.4 from.
I found this thread which is pretty straight forward just need the files.
https://forum.xda-developers.com/an.../firmware-upgrade-guide-amlogic-s805-t3323358
Click to expand...
Click to collapse
This is what worked for me, with links: http://freaktab.com/forum/tv-player...ab/628017-mxq-total-brick?p=628221#post628221
Thanks man. I guess mine is bricked so its give this a shot or trash it. I'll update this thread if it works for me.
---------- Post added at 04:25 PM ---------- Previous post was at 04:18 PM ----------
Just curious. I found this website which apparently has the firmware for my specific box. From what I can tell all these firmwares are custom builds. Is it possible to update my S805 to an S905 build. Not a big deal just curious.
grod777 said:
Thanks man. I guess mine is bricked so its give this a shot or trash it. I'll update this thread if it works for me.
---------- Post added at 04:25 PM ---------- Previous post was at 04:18 PM ----------
Just curious. I found this website which apparently has the firmware for my specific box. From what I can tell all these firmwares are custom builds. Is it possible to update my S805 to an S905 build. Not a big deal just curious.
Click to expand...
Click to collapse
Good luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
grod777 said:
[/COLOR]Just curious. I found this website which apparently has the firmware for my specific box. From what I can tell all these firmwares are custom builds. Is it possible to update my S805 to an S905 build. Not a big deal just curious.
Click to expand...
Click to collapse
No, it's a different processor.
OK thanks again. Fingers crossed.
---------- Post added at 05:06 PM ---------- Previous post was at 04:51 PM ----------
OMG!! There are so many different builds for the OTT MXQ box on the Chinese Gadget Review site. How do you know which one to use?
Just wanted to report back. I was able to load a package but wifi does not work. I looked at all the chips on board but I am not sure which one is the wifi chip. Even if I knew how would I find a package that works with my wifi chip? I dont see any reference to wifi on any of the package names.
Hello, me in TWRP from these mistakes:
E: failed to mount / cache (Invalid argument)
E: failed to mount / system (Invalid argument)
E: failed to mount / data (Invalid argument)
I tried it with USB Burning tool, but the PC does not recognize it, what do I do?
Matteo12510 said:
Hello, me in TWRP from these mistakes:
E: failed to mount / cache (Invalid argument)
E: failed to mount / system (Invalid argument)
E: failed to mount / data (Invalid argument)
I tried it with USB Burning tool, but the PC does not recognize it, what do I do?
Click to expand...
Click to collapse
Sometimes USB 3.0 ports will have issues. If that's the case, use 2.0 port or an old usb hub with 2.0 ports.
@theplagueisback you solve?
YamyYugi said:
@theplagueisback you solve?
Click to expand...
Click to collapse
yes, my instructions are on the previous page written on the image, good luck
theplagueisback said:
yes, my instructions are on the previous page written on the image, good luck
Click to expand...
Click to collapse
Yeah i try short and put various zip on sd but nothing work :|

[Help]galaxy j6 bootloop

I was trying to remove frp from my galaxy j6 SM-J600G. I followed the steps from this page.
Cant seem to be able to post any external link here. Search google with " mytechnotech samsung j6 frp bypass ", the first result seems to be it.
After I did step3 the phone went into bootloop. Was flashing combination file using odin in download mode. I dont seem to be able to get into recovery or anything. It just shows one screen and then reboots. This is the screen it is showing. To note this model doesnt have a home button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone has any ideas how should I move forward?
Cant seem to be able to attach images either.
I will note down what it says.
#fail to open recovery_cause(No such file or directory)#
#reboot recovery cause is [unknown]#
support single-sku
block-based ota
support api: 3
#manual mode v1.0.0#
e:failed to mount /cache (invalid argument)
e:failed to mount /cache (invalid argument)
e:can't mount /cache/recovery/last_locale
romtr said:
I was trying to remove frp from my galaxy j6 SM-J600G. I followed the steps from this page.
Cant seem to be able to post any external link here. Search google with " mytechnotech samsung j6 frp bypass ", the first result seems to be it.
After I did step3 the phone went into bootloop. Was flashing combination file using odin in download mode. I dont seem to be able to get into recovery or anything. It just shows one screen and then reboots. This is the screen it is showing. To note this model doesnt have a home button.
Anyone has any ideas how should I move forward?
Cant seem to be able to attach images either.
I will note down what it says.
#fail to open recovery_cause(No such file or directory)#
#reboot recovery cause is [unknown]#
support single-sku
block-based ota
support api: 3
#manual mode v1.0.0#
e:failed to mount /cache (invalid argument)
e:failed to mount /cache (invalid argument)
e:can't mount /cache/recovery/last_locale
Click to expand...
Click to collapse
Try the following hold insert cable in pc then vol+ and vol- then insert i phone
flash with the original firmware from sammobile through odin v3.13.1. or newer dont use the recomended or older versions they dont work
and flash the files home file not needed
let me know if this works for you
kind regards Marthy1992
Thank you, if worked
marthy1992 said:
Try the following hold insert cable in pc then vol+ and vol- then insert i phone
flash with the original firmware from sammobile through odin v3.13.1. or newer dont use the recomended or older versions they dont work
and flash the files home file not needed
let me know if this works for you
kind regards Marthy1992
Click to expand...
Click to collapse
Hi. I have a very similar problem, but uploading the software does not work for me.
I downloaded the software from the Sammobile XEO website for the Galaxy J600FN / DS.
The upload is going well and ends with a PASS message.
The phone reboots but is looping again over and over again.
Please help.
I tried to upload various software also with the "pit" repair file and that didn't help either.
The phone charges normally, it turns on, you can enter recovery and download mode.
hello, did you manage to fix it?

Lenovo YT3-850F softbrick help

Hi All,
My son brought his Tablet to me yesterday and told me "It's not working". I looked at it and it was stuck on the Lenovo screen. I booted into recovery but it looks like its messed up here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image of issue -> ibb.co/1zCLyYr
After some probing my son tried to unlock it and load a rom, then restore stock rom and it was the last that caused the issue.
Now generally being able to get to recovery is a good thing but in this case it looks completely messed up and nothing will mount including the SD card.
It looks like adb is no longer enabled, it is not rooted and USB debugging is no longer enabled.
So it says
E:failed to mount block devices /dev/block/mmcblk1p1
E:remount block devices /dev/block/mmcblk1
E:failed to mount /sdcard (No such file or directory)
E:failed to mount /cache
And so on.
This means I can't actually get to the SD Card with any update on it if I go to apply update from sdcard there is nothing showing in the sdcard directory
Have tried the following
- Apply from ADB (Device does not connect)
- wipe/factory reset,
- wipe cache
- reboot to bootloader
I can't get into any download mode either.
I did get it at least to make a mounting noise temporarily in Windows 10 but couldn't actually get to it or browse from there and haven't been able to repeat this.
Just wondering if there is anything I can do, or whether I should just forget it, surely there is some way to connect to it.
Cheers
Dan
Interestingly I plugged it into my mac and first it booted to a charging screen which hadn't happened last night.
Also if I leave it plugged into my mac for a little while Android file transfer eventually pops up and tries to connect but then says "Could not connect" but there is some life there at least.
A little more probing and I plug it into my Ubuntu rig and it starts to be recognized as Android but then get "Cant load MTP Device" if I try to browse it.
Looking into dmesg gives me
idProduct=78e8 (This is a Qualcomm powered device)
It then tries to mount it all but ends up mounting it as a Lenovo CD-ROM.
I can't seem to probe it past that, thinking its a futile effort but hoping for a miracle
Further update got it to the point where if I go to "apply update from ADB" the device is recognized and I try sideload but it just fails out on xfer 0.0
Silvertails said:
Further update got it to the point where if I go to "apply update from ADB" the device is recognized and I try sideload but it just fails out on xfer 0.0
Click to expand...
Click to collapse
You CAN NOT sideload an official ROM / OTA update with a modified device. You must have stock recovery and be non-rooted or it will fail every single time.
jwoegerbauer said:
You CAN NOT sideload an official ROM / OTA update with a modified device. You must have stock recovery and be non-rooted or it will fail every single time.
Click to expand...
Click to collapse
I cant do any kind of stock recovery, sideload is the closest I can get to anything, I think he must have put a different rom in there that has stuffed it up.
Is there anything I can do any steps I can take?
Windows won't recognise it so the QPST/QFIL method won't work
any steps or help would be appreaciated I have trawled every thread I can find here an across the internet
@Silvertails
ADB Sideload is a special mode that internally makes use of / runs Android's recovery binary ( AKA Stock Recovery ).
You test whether this mode is ready or not by simply running on PC the commands
Code:
adb devices
adb reboot recovery
If successful then you in Recovery select option "adb sideload" and on PC run
Code:
adb sideload <FILE-NAME.ZIP>
There's a very good thread on XDA here that deals with this model and recovering from bricks.
https://forum.xda-developers.com/thinkpad-tablet/general
Finally got this to work.
Ordered a cable that could get me into deep download mode as jumping the pins on the mobo was not working, the cable didnt get me into download mode, but what i discovered was that if I uninstall it being recognized as a CD ROM and messing about a bit I eventually got it to recognize as an Android Bootlader Interface using the lenovo drivers. I managed to use fastboot even though the device wasn't properly recognized to install TWRP. I got a success message and managed to reboot into TWRP recovery. The device then mounted as Lenovo but a different one, but at least it was mounting.
I still couldn't copy anything over to it, so I put the OTA default ROM on an SDCard and managed to get it to install from there and update to latest versions, and now its all working again.

Categories

Resources