Hallo,i have buy a Dyon Andromeda TV Box,and now i will change the Launcher,but when i install a another Launcher(Atom Launcher etc..)my Mouse and Wlan don`t work anymore after i have change the Launcher and set it as the default Launcher and reboot.When its reboot my Wlan and Mouse dont work anymore,but when i change back to the old Launcher it is working.
I have the Firmware from here: dyon.eu/downloads/firmware/Firmwareupdate_DYON_Andromeda_20121019.zip installed.
Can somebody help me with this problem?
Or can anyone make a Programm where after the first Home Launcher was startet,a another Home Launcher starts and is set as default Launcher?<--when i start the original Home Launcher and then my Home Launcher that i would have everything its ok(Wlan and my BluetoothMouse is work)
I have delete the launcher3.apk from the .zip(the Rom-firmware),and take there my launcher,but then my Wlan and Mouse don`t work anymore.
I don`t have any more ideas what i can do that my Mouse and Wlan would work with a another Launcher.I would be happy if anyone can help me.
Thanks Paul G. from Germany
It`s me again,i have now use the app "Home Switcher",and this is what i need.I need a app that start my "original firmware" Launcher(com.launcher)and after 1 second that my default launcher(com.dlto.atom.launcher)start again.All that i need,because when my "original Firmware home launcher" isn`t start,then my mouse and wifi isn`t work.
My question is:Can somebody make a .apk for me that do this(so i can put it on statup,and all for me is fine).
1.that "com.launcher" start (Launcher)
2.after 1second my default launcher "com.dlto.atom.launcher" start (Atom Launcher)
Thanks
Paul G.
Hallo,i have now change the AndroidManifest.xml in the Atom Launcher to com.launcher,but that isn`t work too,my wifi and mouse didn`t work...hmm
now my question is,can somebody make a .apk for me that to this two thinks
1.that "com.launcher" start (Launcher)
2.after 1second my default launcher "com.dlto.atom.launcher" start (Atom Launcher)
i have tried to make it own,but i can`t understand what in the Home Switcher.apk stands (.xml) i can`t Java.hmm
So i hopefully hope that someone hear can make it for me.
Yours Paul G.
Hello it`s me again,i have now write with the developer of Home Manager,and he has give me a link where i can find the Source,and he has said it`s easy to change,only a few lines must be cahnged,but i don`t know what i have to change.So my question is again,can somebody make this .apk for me?Her is the link with the Source: github.com/rmack/TwistedHomeManager .
1.that "com.launcher" start (Launcher)
2.after 1second my default launcher "com.dlto.atom.launcher" start (Atom Launcher)
and(but if it take to match time,i can life without it)that it is start when i boot up my device like whats app.
for the autostart i have found this link
stackoverflow.com/questions/1056570/how-to-autostart-an-android-application
thanks
Paul G
Hello,nobody there who can help me with my problem?
For you it will cost only a few minutes to make it,and help me with my problem.
I don`t can make it(i don`t know the commands that i have to use).Please help me.
I will now wait,and wait that someone spend his/her freetime to make me this .apk.
Thanks
Yours Paul G
tekkin said:
Hello,nobody there who can help me with my problem?
For you it will cost only a few minutes to make it,and help me with my problem.
I don`t can make it(i don`t know the commands that i have to use).Please help me.
I will now wait,and wait that someone spend his/her freetime to make me this .apk.
Thanks
Yours Paul G
Click to expand...
Click to collapse
You can try with TASKER. It's an app available in the PLAY STORE
You need to be ROOT and TASKER is NOT free...
If you decide to install it, I'll tell you how to do it.
First you must enable TASKER as administrator from the SETTINGS app.
Go to SETTINGS > SECURITY > DEVICE ADMINISTRATORS > Activate TASKER
Then, open the Tasker app.
There are three tabs in the app: PROFILES, TASKS, SCENES
Go to TASKS
Create a new task > APPLICATION > LOAD APPLICATION
And choose your desired application (Dyon's ORIGINAL launcher called simply "LAUNCHER", not your own)
Once you've done this, go to PROFILES
and create a new one and name it as your wish. I named it "BOOTING"
Then you're prompted to chose the first context > You should choose EVENT
After that, you search for DEVICE REBOOT (or something similar). Choose it.
Now, in the list of profiles you'll have your "BOOTING" profile. Clic on it and ADD TASK
Which one? the one you just created (The one that opens Dyon original launcher)
Now you only have to ACTIVATE the profile (move tab to YES) and the MAIN DYON LAUNCHER will be executed on boot,
providing you the network interfaces and the mouse support. With this, you can now set your NOVA LAUNCHER as default.
When you press HOME, your Nova Launcher will load. Also, on reboot... it will also load, since it is the default launcher.
However, since you've configured Tasker to launch the Dyon Launcher on boot, this launcher will ALSO start.
Perhaps you end up viewing the Dyon Launcher layout at boot because it might load AFTER Nova... but it doesn't matter.
You can clic the home button of with your mouse and you'll see Nova back... and forget about it till next reboot
Hope this little guide helps you!
That was it,now every think is ok!Thank YOU!
But i have one more question:
1.the problem is that the Dyon don`t have a build in Microfone(or can i build one to the audio out(that it is work like audio in)???),and i wount to use Skype(i can hear and see the other Person),when i Plug a USB MICOFONE in it,that other Person can hear me,but when i use a wireless mouse and the micofone togerther,that other Person can`t understand what i said,he hear something,but he said he hear me like a robot,can i do something that the mouse and the microfone are woking together?
2.and it is posible to use a usb camera?when i plug my usb cam i have a green picture on skype<--?
3.and is it posible that a bluetooth stick would work on the Dyon?(i wount to use a PS3 or Wii Controller to play the Nes/SNES Emu Games).
I see that Dyon Andromeda / Goclever Android Box 500 and Energy Android Tv Box are all the same,only the remote is other(you can change the firmware from one to other).And the Energy Sistem had the newest firmware(FW_Android_4.0.3_12-09-2013_rev04.rar)...
Yours Paul G.
Firmware Dyon Andromeda
hello,
I'm looking for the firmware for Dyon Andromeda and I'm not able to find it. Can someone share it with me please?
i've got a problem, maybe some one can help me. i've got a energy sistem android tv box, i've changed the fw for optex, but the sd doesn't mount, the remote control doesn't work on recovery, and i can not flash any firmware due to signature errors.
Is there any way to change recovery? or install from zip?
Thanks and regards,
Darina.
Darina,her is the rom for Energy Android TVBox
http://storage.energysistem.com/arc...d_4.0.3_25-06-2014_rev05.zip?0152rF4ox3rbxkXL
for the Dyon Andromeda i cant find it.Sorry
Her for you,i have found it on my HDD and upload it on Zippyshare:
http://www7.zippyshare.com/v/nMOd17Na/file.html
A "how to" is in the Zip file.
Thanks so much Tekkin but someone left me the FW a few months ago. Anyway never could aI change the recovery so I should get the mote.
Best regards,
Darina
Related
Hello,
I write a little Today Plugin to configure and switch between differents phone modes. The system/phone volume, the ring mode and the SMS, reminders notifs are customizable. The graphics too.
I use it for 2 weeks now but I'd like some people try it and give me their feedback, comments...
You can find all here : PocketZenPhone
These are the future of phone profile control, as far as I can tell. Yours is now the second app to provide this functionality, and more can only be good. The other one is PhoneProfilesSeriously (seriously ), which seems to be full of bugs, judging by the comments made in these forums.
I have some comments about your software. Hope this helps!
- The icons are too big. Maybe we could have the option to choose the profile using smaller icons on the Today screen? I know that we can make our own icons, but even if they are smaller with a transparent surrounding, they will still use the same space on the Today screen.
- I would like more than four definable profiles.
- It would be nice to be able to choose a specific sound to be played for each alert type in each profile (i.e. complete alert- and profile-specific sounds).
Good work!
I can say it's a promising start. However, the setup screen will make THE difference. It's a bit difficult to adjust the configuration using the text file . It reminds me when I was using Borland C++ to develop Win 3.1 applications before the first VB version
I have to do many trials to get the desired result.
Keep going ... Good work!! ... but waiting for the user friendly version
Excellent LITTLE utility.
I had bought "My Phone Profiles", and removed it to use this one. "My phone Profiles" was buggy and made the whole device very slow.
You might want to try the attached settings. Just unzip and copy to:
\Program Files\PocketZenPhone\
I say excellent work (especially with the extra icons)
One thing: Could you find an easier way to setup the profiles, better than to tweak the Phonesettings.txt file
I currently add a window to set the phone modes and I will try to add more settings (notifs ...)
But I have not many time to program this software so it will take a little time to implement new fontions ...
The version 2 is online (download and doc here : http://zendrui.free.Fr )
I add a configuration window and allow to customize the notifications.
I will maybe try to allow to configure the sound for the notification and maybe ring tone but later ...
I don't touch to the icons size for the moment but if it is a big problem I will see :wink:
As always do not hesitate to give me your feedbacks
Thanks
PS : If somenone has made his own icons could it share them ?
Does this software work with WM2002 as well?
I compiled it using the Pocket PC 2003 SDK but I don't use any PPC2003 specific functions.
So this should work under PPC2002 but I cannot try as my XDA is under WM2003...
Let me know if it works ... if not I will try to make a PPC2002 version ...
Being new to this I downloaded the files but they are not the installer type that automaticly install,
They are .001 files what do I do with them?
On a WM2002 machine the programme (v2, 26-2-2004) does not seem to install correctly. After copying and executing the cab file it looks like it installs and it does make the PocketZenPhone directory, but no .exe file can be found. Did I do something wrong?
To Jim
Just copy the file as it is to your device, and run it from there. It will install automatically as a today plugin.
You should have download a .cab file (PocketZenPhone.arm.cab exactly)
Copy it on your pocket (through activeSync for example)
Then on your pocket click on this .cab
It will install automatically the Today plugin.
After that go to Settings->Today->Items and you should see PocketZenphone in the list (it should be checked)
Simply click on ok and when you return to the today page the plug in should appear...
PS for vhan3 : This is not an exe file but a dll file ... so it is normal you don't see it directly on your pocket ... The cab file only creates the registry keys, create the directory and copy the dll on it
No comments at this time but this nice program seems to have lots of promise.
Thanks
Nice work, zendrui
Just 3 comments:
1. After first install, all profiles volumes are set to -1 (Perharps because of an empty regisrty at this time). Should set default values like in V1
2. Uninstall is... arrrggg... impossible until you rename dll and reset. Now, I know... no matter (First tried to uninstall after above bug occured)
3. WORKS GREAT !!! VERY NICE TOOL, VERY USEFULL TOO. THANK YOU !
Serge
zendrui said:
You should have download a .cab file (PocketZenPhone.arm.cab exactly)
Copy it on your pocket (through activeSync for example)
Then on your pocket click on this .cab
It will install automatically the Today plugin.
After that go to Settings->Today->Items and you should see PocketZenphone in the list (it should be checked)
Simply click on ok and when you return to the today page the plug in should appear...
PS for vhan3 : This is not an exe file but a dll file ... so it is normal you don't see it directly on your pocket ... The cab file only creates the registry keys, create the directory and copy the dll on it
Click to expand...
Click to collapse
Thanks for the tips. I tried this on my Qtek 2020: no problems, however on my XDA-1 (WM2002) the plug-in does not appear, nor is it visible in the Today item list.
How do you rename the Dll?
vhan3 said:
Thanks for the tips. I tried this on my Qtek 2020: no problems, however on my XDA-1 (WM2002) the plug-in does not appear, nor is it visible in the Today item list.
Click to expand...
Click to collapse
I will try to compile it for PPC2002 maybe this will make a difference...
But I don't think I will be able to test it as I don't have a PPC2002 target so I will let you try it
Jim Ill said:
How do you rename the Dll?
Click to expand...
Click to collapse
Jim why do you want to rename the dll ?
Serge said:
Nice work, zendrui
Just 3 comments:
1. After first install, all profiles volumes are set to -1 (Perharps because of an empty regisrty at this time). Should set default values like in V1
2. Uninstall is... arrrggg... impossible until you rename dll and reset. Now, I know... no matter (First tried to uninstall after above bug occured)
3. WORKS GREAT !!! VERY NICE TOOL, VERY USEFULL TOO. THANK YOU !
Serge
Click to expand...
Click to collapse
Hello,
1) Ok I will add default params for each modes
2) To uninstall a today plugin you have to disable it before uninstall it.
So to uninstall PocketZenPhone, simply go to Settings->Today->Items, then uncheck PocketZenphone in the list. After that you can uninstall it without any problem (no reset ...)
3) Thanks feel free to give more comments
I will try to compile it for PPC2002 maybe this will make a difference...
But I don't think I will be able to test it as I don't have a PPC2002 target so I will let you try it
Click to expand...
Click to collapse
Thanks a lot. On my Qtek 2020 your programme works great and just as advertised. It is exactly what I needed so I hope you will be able to compile it for PPC2002 as well. I'll test it for you.
please i have a problem
i install any theme successfully but it doesn't appear even after restarting the mobile
and every time i try to change the wall paper i chose one from wallpapers then it doesn't appear also
please someone help me
Roushdii said:
please i have a problem
i install any theme successfully but it doesn't appear even after restarting the mobile
and every time i try to change the wall paper i chose one from wallpapers then it doesn't appear also
please someone help me
Click to expand...
Click to collapse
first welcome on xda.
Secondly with some more information it was easilyer to help, but here we go.
mostly themes are package in a cab file, so you download it, copied it to your Sd where ever you will, navigate with your explorer (from your device) tho the path on your sd where you storage the cab file, press on the cab file you will install. You will see a new window open who ask the installation path. select internal memory (do always this fore themes/skins) after installation do a quick restart of device and that's it.
about the wallpaper, go to the setting tab, select background & wallpaper, navigate to the image you would, and select it. that's all.
if you will have a wallpaper fore each tab make use if CHT
in case of something isn't clear contact us again, and give some more information about what you will and problems you have.
first of all thanks alot for your help
now themes are good cuz i was installing on storage card , but now i install on device memory and it is okay
the problem is that i can't change home wall paper ,,
i tried to change it from sitting , home wallpaper ,,,, but it doesn't respond ,, i mean every time i chose a wallpaper it makes no change
Roushdii said:
first of all thanks alot for your help
now themes are good cuz i was installing on storage card , but now i install on device memory and it is okay
the problem is that i can't change home wall paper ,,
i tried to change it from sitting , home wallpaper ,,,, but it doesn't respond ,, i mean every time i chose a wallpaper it makes no change
Click to expand...
Click to collapse
the actually state is it black ore the original one?
also do you use CHT? (cookies home tab)
Do you have install a other application fore background?
One thing is sure, problem is by user it's just finding out what it is
yes i installed cookies before but i removed it now and still the wallpaper nochange
Roushdii said:
yes i installed cookies before but i removed it now and still the wallpaper nochange
Click to expand...
Click to collapse
I see what you mean, it's because you remove the CHT there is a parameter who isn't present now.
Tree way's to restore.
- Restore CHT
- Install bg4all or hq wall patch.
- soft reset
I recommended the first option.
Hello all,
I do not have a lot of posts, so cannot post in the DEV thread.
Also I think it is good to discuss it separately not to spam the DEV thread.
For the ones having uppercase problems:
Press the text input box for some time and a popup will appear for input method. Use Android Keyboard. Done.
Several people asked is it ok for everyday use - yes it is. Using it for a week without problems. Got only a reboot twice by disconnecting the phone from the USB cable with 3.1. Do not get it now with 3.2.1. I got no random reboot so far, expect after FC with 3.2 and root explorer.
About the updates:
You can update all the time to copy the last package as update.zip to your sdcard and then running xrecovery 'install update.zip' method. When I first went from SE to Cyan 3.1 the phone stuck on reboot. Went to xrecovery and did a factory reset and the phone booted normally (with Cyan and not the SE stock).
If you check the contents of the .zip it's easy to understand what will get updated.
About current problems:
Besides the one described by owain, I get forced closed when the market starting to install any application and when running root explorer with 3.2 and 3.2.1 (which has no update regarding these). Also for root explorer I get a reboot after FC. With 3.1 both was working fine. I've seen some changes in the zips that I do not understand the reasons for (why ADWLauncher.apk and MarketUpdater.apk was totally removed from /system/app, things like that).
I will continue to report here if the thread will not get removed. Please try to be specific about your experiences to help the other users.
Thanks a lot,
arch
I try to create an inventory of exact issues and solutions below:
Issue #1: No uppercase
Solution: Press any text input box for some time and a popup will appear to choose an input method. Use Android Keyboard. Done.
Issue #2: There are no zoom buttons in the browser.
Solution: Go to settings within the browser, disable/enable zoom controls. They will be visible thereafter.
Issue #3: Market stoppes working in the moment after the installation of an application finishes (forced close).
Solution: None so far. Tried this (http://forum.xda-developers.com/showpost.php?p=11708912&postcount=479), but it was not working for me (caould not install Vending.apk). If someone could post exact steps to reproduce, it would be fine.
Issue #4: Root explorer gets a forced closed on restart. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #5: Disconnect from a running PPTP VPN connection. Get an 'SD card safe to remove message' and a reboot soon thereafter.
Solution: None so far.
Issue #6: Keyboard backlight is still on after sliding back the keyboard.
Solution: It has some timeout. After a while, the backlight is switched off.
Issue #7: Sym(bol) button not working
Solution: After pressing it (blue+sym) press space and a pop-up will appear for selection. If you don't see the char you wish for, blue + long press the key which likely has it as an alternative (instead of pressing sym). E.g. long pressing blue + Z (which is 3) will give you 3, 3/4, 3/8.
hi everybody
it seems like we've got an incredibly smooth and fast rom so far. everything works flawlessly
I still have only 2 small (really small) issues:
1) changing language on a hardware keyboard. on a stock SE rom there was a tiny selection box on a screen. now there's nothing. I just can't change language on a hardware kb...
2) there's no zoom buttons in a browser.
is it bugs or just my stupidity? if someone will help me, I'll appreciate it a lot
bw, have anyone noticed the same things or maybe it's just my install ?
Market Mobile Networks ?
Hi,
market does not work when mobile networks is on.
What settings do I have to invite the Market.
E-Plus
LG Josef
Good idea to make the discusion for the low level ones
I have problemes with blue tooth. If i boot with bt aktivated ihave it but if i deaktivaate it and aaktivate it again in don t work
Anyone else have this prob ?
Sent from my U20i using XDA App
This my first post i think, but I've been watching this forum for a while for updates.. Thanks for making this post.. I was just going to spam the forum with posts so i could post in the development thread. But then i happen to find this thread.
Does anyone have the original camera apk? or would it NOT work?
The basic one on 2.2 is UGLY and not very good for the small screen. Also the file names are annoying.
I find the original one on 2.1 was alot better, it fit the screen better. Also i like how it saves the files as DSCxxxxx made it really easy to use.
Vignette takes way too long and does NOT flow well. (takes long to save photos + You can't press the camera button to get back to taking photos.
The original one on the 2.1 firmware flowed well and you could take pictures easily.
If not can anyone recommend an app that works just like it, or really similar?
sym key
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
ff0000.it said:
Damn me... i see your thread just when i post a thread for the sym key... :-|
By the way, the sym key doesn't work as expected, it doesn't pop up special characters, special punctuation marks and emoticons selection (as it does in SE stock rom).
Anyone with the same issue?
Click to expand...
Click to collapse
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
for capital letters you have to do this:
kinglargo said:
Shift didn't work at start either but got fixed when I started to disable/enable stuffs in "Settings > Language & Keyboard" like "Android Keyboard" "HTC_IME mod" and "Default Input"..
Click to expand...
Click to collapse
Deehee3 said:
It's a known issue of this ROM. You can type special carakters like "ä" by (in this case) long pressing the "a", "ö" long pressing the "o" and so on.
Click to expand...
Click to collapse
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Mark this as solved and mark me as idiot!
i've update my x10mini pro to Cyanogen 2.2.. im a brazilian and the keyboard layout is wrong.
here the /system/usr (http':'/'/'www'.'mediafire'.'com'/'?'5qr3vk5r50fnx1v') of brazilian 2.1.1.A.0.6..
and here, the keyboard http':'//'1'.'bp'.'blogspot'.'com'/_bl-dkgjBPqA/TQd_gMW-3fI/AAAAAAAAD5k/YSyLym8c_5A/s1600/'DSC_0297'.'JPG
can anyone help me?
PS.: I CANT POST EXTERNAL LINKS, SO PLEASE.. REMOVE THE '
I have notices that the Market is the old and not the Market that enabled all Resulutions
ff0000.it said:
I don't use those special characters, but symbols like '_', '"', '{', '}', '$', '%', '<', '>' and so on, should be very useful
Click to expand...
Click to collapse
first press "sym" and then the "space"...
i can`t install some apps which earlier worked good..such as angry birds,androzip,galcon,svox voices...
who has the same problems with this rom?
I still have some problems on market too
7.0
Guys,
let's wait for 7.0 and forget this version or accept for the next couple of days that market has an FC. Owain is going ahead like a machine...
Thread closed, cheers,
arch
Hi to all, this is one of my first posts here (maybe the first).
I've just installed this custom rom, i had some trouble with the market solved installing market.zip as suggested in the official thread of this CyanogenMod 3.2.1 and now it seems working fine.
I've just a question about the next apk installation... where install them? Or better, wich settings use?
I mean...
go in Settings > CyanogenMod settings > Application settings
have I to select "Allow application moving"?
And then change something in "Install location"?
By the way I prefer to install the applications in the sd card because of previous problems of full memory with Android 2.1.
Please tell me something about this question and sorry fo my poor english
so for me all is well done but bluetooth is still not working, only after the 1st boot
but after deaktivating und aktivating threre is no blutooth again.
Is there a fix posible ?
3.2.1b ROM
Dear all,
I put a 3.2.1b ROM here: http://forum.xda-developers.com/showthread.php?t=982489
Couldn't help much with application install, bluetooth, just checked and merged the sources from owain and nobodyAtall.
Have a nice day,
arch
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Andreson01 said:
As yet I can not post on dev, I'll put here, I hope you see,
I just want the original x10 mini pro portuguese From Brazil(PT-BR)
link below the keyboard, remove the spaces ok.
http ://stanasoft.com/site/images/x10_mini_pro_keyboard_pt-br.jpg
Click to expand...
Click to collapse
Please check out this Thread and install the sony erricsson Zip (Huge Download link) follow the instructions exactly!
HardWare Keyboard Thread
Yeah, support slade with his efforts on the keys!
Thanks a lot mate!
i have doubts i could not take of reading for HOURS and searching and reading... so here i am to try any good soul to answer me:
1 - how do i use SEUS to verify my firmware?????? Can u explain me pass to pass?
2 - i have froyobread CM6 in my mini pro... Kfix solved the leds problems in HKeyboard, BUT.... i can make it work in my language...
I am Brazilian, my language is Portuguese-BR. I tried to use the Mini Rom Manager to change the hardware keyboard layout but querty-br didn´t work... and it has no other language (i think so...) i can use as i need sym/ä and ç in my language...
can somebofy help me to solve it explaining me a pass to pass?
PLEASE?????????
3 - my virtual keyboard stops when i try to scroll it untill the end using the sym... some tip???
4 - how do i install java in the mini pro?
no answers
ok..... so as i have no answers... i continued trying to get info in the net...
i tried GingerDX, FroyoBread and now i am using CM7Pro for mini pro...
what can i say?????????
well... Froyobread i had no hardware keyboard working in portuguese brazil PT-BR...
i tryed Rom Manager but i got nothing working in the HK
i need to try another tips, but as i am a newbie i waste A LOT OF TIME to understand what to do with the files people post here.
GingerDX it´s awsome but i got no bluetooth working, no HK and no lED light in the HK, and Rom Manager didn´t work in the ROM... i got info about how to make Rom Manager work, but not fully and did not try as my bluetooth didn´t work and i got nothing about how to fix it...
i tried to reinstall the ROM in a fresh base, i tryied to wip it and restart several times... and GingerDX had bug for me in the touch screen and buttons i could not enter the ROM when the LCD turned off. And the Sym/àü key stoped work if i´d scroll it untill the end down. Yes,,, there was tip about how to fix it... but for me had so much problems i tried another ROM
Now i have Cyanogem miniCM7Pro V4. For now the only problem it´s the HK... i am AGAIN trying to find a solution.... everything else it´s working for now... but i need to do more tests.
Some more bugs... please guys.... help!
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
3 - no GPS
4 - no internet connection but the wifi is on !!!!
azhhael said:
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
Click to expand...
Click to collapse
Rom manager
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
Me too
3 - no GPS
Me too
4 - no internet connection but the wifi is on !!!!
And me too
so........... trying again
well... with so much problems i tried all again... what i am getting now:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know how.... does anybody know how???? Can give me a help????
more doubts..... help again
i am trying to get my old file as tells here:
you can browse an xrecovery file you already have and find the keyprint.xml , or find the keyprint.xml from an other rom you installed in /system/usr/keyboard-config and copy it to the sd card
with root explorer or any file manager that can explore your root
go to /system/usr/keyboard-config delete the existing keyprint.xml and paste the one on sd card
give the right permisions [x] [x] [ ]
____________________ [x] [ ] [ ]
___________________ [x] [ ] [ ]
(remember to mount write before you do anything on system)
reboot your phone
but i can´t cause it tells can´t find the file in CWM
i have ".img" files as backup done when i was with 2.1 android from SE.... i need to get the original HK file to test the tip... but i have no idea about how to get this now...
PLEASE HEEEEEEEEEEEELP
you sir, are a dedicated problem solver
i've added my stock rom keyprint.xml for you, hope that helps you
unzip that to sdcard and then just copy it over to the right system folder using root eplorer and setting the right permissions
---
As for the screen borders getting no touch input, the only cm7 version that wasn't the case with was minicm7-v14,5 by slade.
all other versions suffer from it
The symbol menu crashing when scrolling is a common froyo/gingerbread issue and can partly be solved with a workaround
if you go to cm settings > user interface and enable overscrolling and set it to bounce, the symbols menu in h/w keyboard won't freeze anymore. Except that doesn't work on the symbols menu in soft keyboard.
goodluck!
Hello Anderson... in my last post i told what i did that helped me to get the most problems solved in the ROM.... i´ll repost it here:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know
any doubt about it ask me, now i learned a lot!!!!!! auehuaehauehuaeh
and if you think i could help... and if the button appears to you, thank me in my post... :-D
cheers
Oh .... thak u so much for you good help, and for the file.
I tried to do all with the file you sent me, but i got no working HK in PT-BR yet....
this post tell what querty file for the correct language in the HK but i didn´t understand how to install the language...
http://forum.xda-developers.com/showthread.php?t=982341
can you help me? Maybe you may know how...
oh god, i think i did something really bad!!!!!!!!!!!
more questions... i found nothing explaning it in the forum... can somebody help?
I am with GingerDX v5 ROM
1 - when i plug my phone to PC, so PC Companion asks for "choose between charging, connecting and etc..." but there is not the option in the phone screen to do it... what do i have to do to connect???
2 - i had sony android 2.1 and i did a backup using xRecovery so i could install another ROM ... so... after that i formated my sdcard... lost all... but before it i did a backup. So i have inside this backup a folder called xRecovery > backup > 2011-08-02.02.29.25 >
nandroid.md5
cache.img
data.img
system.img
so, my question is: "is there a way i can recover my old android 2.1 with this files??? Or did i lost all...???
and... how can i open this "files" so i can get HK files from old 2.1 i had????
I knoe i have a lot of questions, but i can help too... i think so...
hello guys... i am really ansioous for your help about my last questions.
But for now let me tell what i got.
I Unzipped GingerDX v5 and unzipped pt-br files.... so, i copied these files to Ginger ROM and deleted the original ones. So, i zipped GingerDX again.
So, i wiped all in CWM and reinstalled GingerDx using my zip.
No, it´s all working as before, but the difference is that i have my HK almost ok. Now i have the right keys unless for the SYM key i can´t do it working yet.
Please, do u guys have any ideas?
And need the "popup bar" that appears in android 2.1 when u use the HK... that bar where we can change language and see is the we r using the numbers, or "big letters (?)" or "small letters (? oh... sorry for the bad english)".
I saw something about it in the GingerDX v6 thread but i didn´t understood nothing cause they talk to people who knows about the programing... it´s not a pass to pass... so, can some good soul help me about all these problems????
PLEASE....
I´ll attach here the file i used to replace HK files in GingerDX v5... maybe it can help if somebody can have a look at it about the SYM key and the popup bar...
hope u give me a help guys , i have nobody to ask for....
Can anybody help?
Hello XDA guys... i know you r busy guys, and really intelligent ones... cause waw.... i´d really like to know about programming as u.... but well, everybody has a talent and the mine is animation in computer graphics... if i can help you anyway about it... let me know... but
I need help!!!!!!!
please... guys, i believe my problems can help not just me, but more people here as i could see... and
Hi, I kinda solved the sym key by accident and i can't really tell how i did it but actually I just selected the keyboard i needed in mini rom manager and then i went into settings/keyboard and I unchecked all boxes.
After that I rebooted and I checked the boxes back and it worked. It may sound weird but the sym key works on my phone. I'm using paul's rom V4+hotfix.
Hope this will help you.
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
waw... weird...
Carpe-Dimi said:
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
Click to expand...
Click to collapse
it´s really weird that issue about sym key you did, Chucklechivers. hehehe
But... i am trying to reproduce that "issue" auehaueh.
And Carpe-Dimi...
I just got a little problem, or two:
1 -i use Ginger DX v005 ROM, i installed Mini Rom Manager v.5.2 from Slade but when i try to change the HK layout it tells me it´s not compatible with my device. So i tried to change the build.prop file as people tell here in XDA so MRM should be compatible... ok, that´s working. But when i try to change the language of my HK nothing happens after reboot... no changes. And a lot of features of MRM can´t work properly
2 - when i access the language and keyboard setting to set default input, it doesn´t exist in my ROM... i just have 2 keyboard in the Ginger DX v005: HTC and Android... no other.
About the overscrolling... can i set elastic overscroll and bright? or does it just works only in simple elastic mode?
so... any ideas, guys??? i am still searching for answers... if i thind any... i´ll put it here...
it might be that MRM can't change keyboard cause of the new keyprint.xml file u've used, but I'm not certain about that. and not all functions of MRM work on all phones and roms either.
í've added an apk for the standard input. using root explorer copy that to system/app (on your phone, remember to set r/w) and give it the permissions rw-r--r-- (read+write for owner, just read for the other two)
reboot and u should be able to select default input from the settings menu.
bounce and glow will work as well
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
EUI Version
CHINA with Play Store and Play Services - EUI 6.5
US (Android Aosp) - EUI 5.8.057S
Awesome! performing the upgrade to 6.5 today!
OK, I've got it installed EUI 6.5 rooted, but I can't seem to get Gapps installed for the life of me. using the script calls ADB, but I can't figure out how to enable debugging in my TV to allow that.. The new UI is just too different to locate what I need to do.
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
[Recovery] LeTV Super4 (4th generation) :: All Mstar 6a938 based models supported
I want to leeco tv android oreo custom rom
I want to any custom oreo rom for leeco tv it is possible or not.
telegram group for LeEco
Souviktechguy said:
Hi All
If You Own a LeEco X4 series tv then you must know that LeEco will not give any future Updates to the tv. Many of you want the play store Support and Google Play Services support..
We are happy to inform you that we have successfully Installed play store and play services on the X4 series.
We Also Thank our developers Who made it possible -
1) Roman Kent
2)Nanerasingh Manu
3)Neekz
4) Dipcore
5)Prateek Kejriwal
Also you can install any custom launcher..
Please Join The Telegram Group For Further Help -
MOD EDIT: LINK REMOVED
There are many links So will share them soon.. Until then please join the telegram group.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
routerhacker said:
What is the magic to get Google Assistant 3.0 or higher working on a LeEco x4-55? It seems to always crash right after sign-in process.
Click to expand...
Click to collapse
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
I have the LeEco 43 in bedroom....so frustrated, it is connected to the internet. I have cut the cable and using apps. Every time I turn the tv off...and then turn on later it will not upload the apps....I unplug the tv for a minute...then turn on and the apps load. I am not that tech savvy and would appreciate any help you might offer
Stuck
Darksurf said:
I take no credit for any of this work. I'm just a user who found the instructions vague and confusing. So once I figured out what I needed, I decided to document it here.
OK, I've gone through all the steps. Its kinda clunky but it works. I'll first warn you if Netflix is your thing, this probably isn't for you.
Netflix does work, but you're required to use the phone/tablet app from PUREApk. This evidently reduces the video quality quite a bit.
It was noticeable for me. Felt like I was watching somewhat artifacty 720p. To get there I had to enable settings for video quality to "HIGH" otherwise it showed up in SD which was way worse.
So if you enjoy 1080P or 4K netflix, this is not your upgrade. Also, if you don't wish to be forced to use keyboard/mouse. this is NOT your upgrade. If none of that matters to you, by all means feel free!
Step 1) First flash EUI 6 BIN FILE https://drive.google.com/file/d/1HBiM2WAllOQ43ONI7Jk3Gaey6P8FYDmo/view
To do that you must format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
You'll notice the TV comes on in chinese. If you need english use the google translate app and camera to convert chinese to english.
Get to home screen, press settings button, go to bottom System Settings, another menu will slide out, then General (3rd option down),
Next go to Time and settings (second option down), Go to right pane and 3rd/bottom option will be language. Select English.
Step 2) upgrade to 6.5 via offline update zip. DO NOT USE THE ROOTED BIN FILE YET, you'll have to start over if you do.
Download https://drive.google.com/file/d/1rbov4oeMUh49rSF2hvUPvoTqRXGbThYS/view and place it on the FAT32 flashdrive.
After skipping through the tutorials and jazz, go to the apps pane (press right button a few times) and go to system update -> offline update -> choose 6.5 zip file.
Step 3) Flash 6.5 rooted bin file https://mega.nz/#!GIYCxQLB!V2jBnfH0K5-DzUUWy6_RegDlnhglxpWJhVa8yd5NVKE
Basically repeating step 1, but now with the 6.5 rooted bin file. Congrats, you're rooted.
Step 4) Download the GApps install tool. https://drive.google.com/open?id=1DHViq0yJ_-RlV3LQ_BuQsxIKEk2ip7ZB
Be warned, this requires windows and isn't as straight forward as you'd hope. The app doesn't work until USB Debugging is enabled.
Also, you won't be doing this over USB. It'll be connecting ADB over Network. To do this you need to:
Go back to system setting where you changed language, but go down to saftey and enable "Application of Unknown Origin".
Now we need to sideload apps.
download https://apkpure.com/usb-debugging/com.bluedragonfly.developeroptions to the flash drive, and use the file manager to locate/install it.
download also https://forum.xda-developers.com/showthread.php?t=1687590[/url] ADBD.apk to the flash drive and use the file manager to locate/install it
Open the first app and enable USB Debugging. Then open the second app to enable insecure ADB.
Now the janky GApps batch script should work. You'll want to perform actions 1, 2, and 3.
Sadly, this will factory reset your TV once again, and you'll have to go through the setup, but its no big deal.
Now if you want extra packages I suggest sideloading the PUREApk app from https://apkpure.com/. this will help you install the Netflix mobile app.
If you want to enable HDMI CEC by neekzz, Place https://mega.nz/#!aQQgiDyQ!ih9K6-rZ0yQoToDPoqAg93AN6Cy3L5JNsdMw7Fy-ADc
on the system/lib64/hw . Then turn off the receiver. Restart the TV... You'll need to know how to use adb to push the file.
REVERT ) So you've decided you've made a grave error, or don't care for some quirks, whatever the case may be, time to go back to US FW.
Step 1) Download US Stock firmware BIN file. https://mega.nz/#!fcwxGQ5I!FmO4xArY4ObmittoVNfnE21utvy8kkSSnTJFR9UXA3I
Format a flashdrive using FAT32 and place the bin file on it with no other files or directories. Make sure the file is named LetvUpgrade938.bin .
I used my phone to format the flashdrive. Linux also works. I hear MAC users are gonna have a bad time, as it does something different with FAT32 making it go unnoticed.
Then place the flashdrive in the TOP USB port, completely turn off the TV. (unplugging TV helps)
Then point the remote on the TV and press buttons: SETTINGS, VOL +, VOL-, CH-, CH +, POWER. Pressing slowly, hold each button for 1-2 sec.
the TV should turn on in recovery mode and begin flashing the bin file. This take a while be patient.
Step 2) Upgrade to last known US firmware available. Download the file from the following link:
http://g3.letv.cn/263/6/84/scmauto/...C058056B04201S_5.8.056S_0420_USER.zip?retry=0
Place the zip file on the flash drive. Go to System Update app and perform an Offline update and select the zip file.
And you're done. Welcome back.
Step 3) you may have some issues with Google Play Services constantly crashing. Latest Google Play services needs a newer version of Google play services to be installed .
Ridiculous, I know. Side loading the latest Google Play services apk can help resolve your issue. Download the apk from:
https://www.apkmirror.com/apk/google-inc/google-play-services-android-tv/
Put it on your flash drive. Go to settings > Security > and Allow Unknown Sources.
Open File Manager > APK > and select Google Play services apk.
Click to expand...
Click to collapse
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
the Doctor said:
Not possible. Per forum rule #5, promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
How do i post links for other firmware.. Xda is not allowing me to post firmware link as well!
Toni247C said:
I have done the US din and update after i accidentally moved my internal memory to a 3.1 drive. After doing the updates and google play store and services does its updates my screen flickers and a grey screen comes up with a black strip ontop. I have to press back on my remote until it comes up again. Many times back to back. I have to wipe my tv to get it to stop but after updates the same thing happens. Do you think you can help?
Click to expand...
Click to collapse
Clear showtime app and force stop... It will resolve your problem
blk4004 said:
I have a LeEco X4-55, and have now gotten Google assistant to work, so, thanx for those tips. greatly appreciated.
Is it possible to re-issue the joinchat invitation for the Telegram group, it seems the one listed above has expired?
Click to expand...
Click to collapse
Search TECHNITURE channel on youtube for more help..
You don't have to unplug the tv, hold the power button down for like 4 seconds to fully power the tv down, that works for me.
我是香港用戶。我成功刷了美國5.8 Rom，但無法搜索香港電視信號。如何將ATAC轉換為DTMB？
Hi my name is lawal am using leeco tv can some help me with new update please
Please some one should help me with new update for leeco tv please thank you all