hi all,
im new to android and i successfully rooted the tablet (if anyone is having trouble rooting T10, im more then happy to help), and now id like to put a custom rom on it of course , but the problem is there arent any that are specifically for Alcatet T10. Id like to try cyanogen or AOKP, but they all focus on specific devices and since there arent any for T10 i dont know which one to chose. More specifically id like to know where does T10 fits in similarity or what not with the other models (tablet, phones) and if there are any that are similar can i use that ROM to install on T10. I just need to know if something bad can happen if I use ROM which is not specifically for T10, and if something goes wrong can I return to stock ROM?
any help is very appriciated, tnx in advance
tablet specs are:
Operating System : Android 4.0.3 Ice Cream Sandwich
Application Processor : Rockchip RK2918
CPU : 1GHz Cortex A8
System Memory : 1 GB DDR3
Storage Capacity : 4 GB NAND Flash
Wi-Fi : 802.11 b/g/n
Audio & Video Play : Built-in audio chip, 1080P HD playback
External Interface : Micro USB, Micro SD
Battery : 3000 mAh, 3.7V Lithium
Camera : Front camera 0.3Mpixel
wiki,cyanogenmod,org/w/P1c_Info --- remove coma and put dots
Samsung Galaxy Tab (CDMA) official cynogenmod ROM
what do you think about this one? its the most similar, has the same CPU, and T10 has 512Mb more RAM
a simple yes/no/maybe would suffice
Rooting T10
Hi,
I am at my wit's end. Trying to root the Alcatel T10. Each time I put it in debut mode and plug it in the USB, my pc just gives the "beep-beep-beep" of device not connected. On my device manager screen, the device shows as Other devices | one, and any attempt to install and/or update drivers just end in miserable failure.
In the past I have successfully rooted my Samsung Galaxy Gio, and Pocket, and unbricked my son's phone after he tried the same, so I'm not completely clueless in this regard. I just cannot get my T10 to connect to my PC in debug mode...
Any and all help will really be appreciated.
Since you say you have successfully rooted yours, maybe you can just point me in the right direction.
Thanks!
Hello i got question.
Played Parallel Kingdom via Android and my device got banned ( was like wtf lol).
We were playing on one wifi spot and they said I was using multiaccount
Is there any way to change Device ID ?
Used CHange Android ID *Root* but didnt work( ID changed, still same issue).
Even if i flash a new rom it says the same Device blocked.
Im using a FunTab 7.0 atm on Ly-f1 rom which dont show Serial number in settings.
SPecification :
(ARM7) 1,2 GHz, Boxchip Allwinner A13A.
Graphics Mali 400,
512 MB RAM.
CWM 6.0
Please if anyone is able to help, send reply!
So ...
I just flash my tablet with a closer model firmware, not the original factory.
It s an chinesse tablet EKEN a70h model a23 procesor from Allwinner
Everything it s ok till now, at list working camera,and gsensor problem.
In hardware info device app, not even show me the camera drivers .
Question : How can i edit kernel to fix those ???
( I know,flashing other firmwares then those for model type may cause running errors but i didn"t find the original firmware for my model so... i try this one and it works 80%.)
10x in advance
good day every one..
i have my phone cherry mobile life 2.0 in the philippines the chipset is msm8610 qualcomm device..i keep searching for the cwm of my phone but i found out that nothing compatible with it.is there anyway to have a custom recovery for this phone?so that i can make a nandroid back up or restore.
seidemer said:
good day every one..
i have my phone cherry mobile life 2.0 in the philippines the chipset is msm8610 qualcomm device..i keep searching for the cwm of my phone but i found out that nothing compatible with it.is there anyway to have a custom recovery for this phone?so that i can make a nandroid back up or restore.
Click to expand...
Click to collapse
Hi! Some questions:
1. Is your phone rooted?
2. Do you know the OEM unit of this phone?
3. Can you upload the following: boot.img, build.prop, recovery.fstab?
arvinquilao said:
Hi! Some questions:
1. Is your phone rooted?
2. Do you know the OEM unit of this phone?
3. Can you upload the following: boot.img, build.prop, recovery.fstab?
Click to expand...
Click to collapse
sir can you help me on my problem. i'm also using this phone. and i tried to install chainfire 3d. and it bricked my phone. my phone is rooted. i dont know how to know the OEM. and i cant find boot.img. i backed up it using mtk tools but im not sure if i did it correctly because i click the back up button in the mtk tools and it back it up and turn it to a folder and a compressed file named backup_141107-210816.. please help me
arvinquilao said:
Hi! Some questions:
1. Is your phone rooted?
2. Do you know the OEM unit of this phone?
3. Can you upload the following: boot.img, build.prop, recovery.fstab?
Click to expand...
Click to collapse
Good day Sir im Looking For the Custom Rom For Cm life But all Was no update would you Help ?
where shall i find that boot.img, build.prop, recovery.fstab and OEm sir ?
thanks in advance
Cm life 2.0
good day sir..this is my specs of my phone ..can you make any custom rom for this?..i hope you dont ignore this..thank you
Cherry Mobile Life 2.0 Specs
1.2GHz Quad Core Qualcomm Snapdragon 200 Processor
Android 4.3 Jelly Bean OS with Kitkat Update
4.0 Inches Capacitive Display (800 x 480 Pixels, 233 PPI)
Adreno 302 GPU
8.0 Megapixel Main Camera with LED Flash
VGA Front Camera
512MB of RAM
4GB Internal Storage
Expandable up to 32GB via microSD
Dual SIM/Dual Standby
3G HSPA+, 2G EDGE and GPRS Networks
Wi-Fi and Wi-Fi Hotspot
Bluetooth
GPS
FM Radio
MicroUSB
3.5mm Auido Jack
Motion Sensor
Proximity Sensor
Ambient Light Sensor
1,350mAh Li-ion Battery
...
Since I was the first one i think to root the device(im not proud actually), (this are my referal pages >>>>> comtech.site11.com/forum/threads and @ pinoyden.com.ph/index.php?topic=346243.0)
I was starting to develop the cwm recovery of it and suddenly stuck... kasi busy sa trabaho... wala na akong tym para gumawa ng custom rom at recovery.... I wish someone could continue.
bought this iphone 8 plus clone and well i had problems with language, it's all in chinese. so i started experimenting and now i messed the phone up to the point where only thing i can do is flash it using flashtool
Info i have:
Cpu MTK6582
1GB RAM
Android 4.4
Baseband v: MOLY.WR8.W1431.MD.TG.SP.V1
Step 1: Download and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Illia73 said:
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Click to expand...
Click to collapse
Sorry sorry :| My fault. Clone Iphone 8 Plus S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
ramiki said:
Step 1: and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Click to expand...
Click to collapse
ramiki said:
Sorry sorry :| My fault. Clone S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
Click to expand...
Click to collapse
It's original copy of iPhone. thanks a million Ramiki
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
redmachodevil said:
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
Click to expand...
Click to collapse
please I have the same problem with you can you help me with flash for i phone 8 plus chip mtk 6582?
use this firmware will solve your problem
https://drive.google.com/uc?id=1qK5zLQOPHmUPn4drni57A3W4_HDu85N9&export=download
Illia73 said:
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
Click to expand...
Click to collapse
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Need Help : Correct Firmware
MuhammadJihad said:
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Click to expand...
Click to collapse
Hi
kindly help the same problem with me i have flashed my device with wrong firmware got from various sites hence device screen got black but its working i think there is any LCD Driver issue, now i am unable to find correct firmware for my device even i have tried around 15-20 different different flash files but not working. please help me to get it back. i have taken snapshot of device info before it got bricked, please have below details and help me please.
Brand : iphone8
Model : MN4A2ZPA
Android : 5.1
Kernel Version : Linux version 3.10.72 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Wed jan 17 18:19:09 CST 2018
CPU : MT6580M
Resolution : 960 x 540
RAM : 512MB
ROM : 2GB
please provide if anybody have correct firmware
Great.
But we need the password to unzip the file
Could you...?
Thank you
Needed firmware iphone 8 plus clone a match
I can't run flashing because it's type not match.
I have type firmware code-516 while the target need type code-519.., Where I get the type please help me?
Hi,
I have an Iphone 8 clone (mt6582) that had a very laggy ios inteface so i flashed another ROM and lost radio signal (unknon baseband).
So i found after lots of reasearch 2 roms:
- 1st one had a working baseband but no ios UI and a little laggy(not as much as original one)
- 2nd one has an IOS 10 fluid interface but no radio
I tried to make a copy of NVRAM from 1st one using diferent tehnique to put it on 2nd rom but didn't worked,
Can anyone help me please?
I have to mention the original firmware was reporting:
-IOS 11.2.6 (15D100)
- Model: MNRJ2CH/A
-the MTK Droid Tools were reporting that inside the kernel was modified the info to show MT6589 instead of MT6582
build data was 2015/05/15 (i saw couple of clones with this date)