[Q] Recovery refuses to work - Asus Eee Pad Transformer Prime

This problem probably has shown up a lot and usually I would take my time to look around before asking but I'm feeling lazy so here goes:
I recently put in a new-ish ROM (it's am US stock type ROM that I found on here) and all works well except for one thing - the CWM refuses to load. At first I was getting the dead android with the red triangle sticking out and so I decided to use ROM Manager to flash CWM again. Might have been a bad move since I'm still fairly noob-ish but anyhow it didn't work. Now whenever I try to go in it just freezes. If I try manually it shows the RCK box, android box, etc and just stays there. When I try to do it through ROM Manager it stays at the first ASUS logo. Can someone refer me to a guide I could follow or even give me a solution to fix this? I will be very grateful. Thank you in advance.

Related

[Q] Please please help this noob out!

As previously stated I am a complete noob when it comes to flashing android devices.
Here is the problem I am faced with: I recently rooted, and unlocked the bootloader on my atrix hd (ATT)
Since then I tried installing cm10.1 multiple times on the secondary "Rom slots" within the bootloader, without any success. So I finally decided to go for it and install cm10.1 in the "stock rom" slot, Prior to doing this I did a back-up using Rom manager. Aand now I seemingly can't even boot into recovery mode, every time I restart my device it simply goes to the cyanogenmod blue ring thingy and gets stuck! (I have left it for 15-20 mins thinking it might be some kind of installation process..) But apparently it's not and i've broken my smartphone lol. Anyway i'd really appreciate some help fixing this problem, a step-by step guide would probably work best..!!! I have both windows 8 and Ubuntu installed on my pc, just saying..Don't know if it's relevant information and may simplify fixing my problem...Thanks in advance guys and girls
i've even tried holding down all three physical buttons and it simply takes me back to the same screen!!!
you could try something like this:
http://forum.xda-developers.com/showthread.php?t=2434726
.. and you are sure, that you can not enter the recovery menu??
official motorola guide, how to enter recovery menu:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/60620/action/auth
.. adb could be your last possibility, if everything else fails, google it, you'll find many answer

[Q] Help needed

Hello! I have tried to get help from here before but then i did not have much info about the programs i used for my phone.
Anyways, I have a LG Optumis 3D (P929). I rooted it as told, Got myself a rom ( i useClockworkmod recovery v6.0.1.9).
Restarted into recovery mod and i did wipe out data/factory resetfollowed by Cache...
Installed this famous-for-not-working-file "XBSA404.ZIP". Not only me who's getting "Installation aborted" whitout any details why.
I have also tried out "ISC 30a" wich is supposed to be the stock rom. This one works to install but nothing happends.
It says it is mounting but as the XBSA404.ZIP once it comes to install it just jumps to complete?
It seems but i dont know if iits supposed to do that? It takes around 2minutes for this to happend..
Since i tried to install a newer version of android into my phone, everything is stuck at the startup logo. "Bricked" i think is the word.
Im new within this but i try to learn. Now i just want it to start and what ever i must do to get it to work again i am happy for any help with it.
I have looked for downloads with any working ROM and on this site all the links seems not to work.
I have done this tutorial via xda forum a several times without any good resaults.
Also.. once i try to start up in recoverymod the phone jumps into my logo and freezes. I press vol- home and power, releasing once the logo appears. Dont know if its me or if its the phone thats not working. No dmg to it what so ever but i have to repeat this a several times before it comes into recovery mod.
Please help!
Did you backed up your phone's ROM?
else, I think you have to find someone that have the same phone as you are and back its ROM then use that back up ROM to your own phone
*fellow people out there correct me if i am wrong, thanks"

Bricked Alcatel OT 995 Ultra

On my first attempt at installing a custom ROM (It was a cyanogenmod which I made sure was compatible with my phone through the CM forums), I think I completely ruined my phone and need some help. I followed a video tutorial and decided to have a go with a ROM installer, I uploaded the ROM and Gapps to my SD card and through the app I put it to motion. Little did I know that after the first reboot I get stuck with a an img of the android root with a red triangle and an exclamation mark inside(I wish I could post an image on it but I can't link until I get 10 posts apparently) , and hasn't changed since then. When I try to turn on the phone it simply won't turn on and displays that image, which I guess can only be because all data was wiped. Is there anything I can do to fix it or must I contact the seller to try and get it replaced? Also, would it get replaced or would I get a slap on the face because the warranty doesn't cover these endeavors?
Anyone? Really need help here.

Please Help me! :( Seemingly bricked my Wave

Ok guys so, I had installed badadroid but after reading around the internet about how certain ROM was faster I decided I would try it, I flashed the uninstall zip in the badadroid thread and followed the instructions on the blog of that certain developer HOWEVER at one point I'm asked to flash a new FOTA and bootfiles with multiloader, I did that but at some point I messed up, now my phone boots up to this screen and sometimes to the recovery provided by the other ROM, following the steps to install that ROM and rebooting doesn't help at all and I keep getting stuck in this screen, my phone shuts down automatically a few seconds later and multiloader doesn't recognize it.
I still have hope because, when plugged in, it boots past this screen and into said recovery, however it seems like Bada was wiped during this process and I can't find a way to go back now (I only found out this happened right after I had already done this)
Is there any way to force it into download mode? I need my phone
Thanks
EDIT: Managed to get into download, will see what I can do, I guess I can work things out now, you can close the thread
Also, sorry for the bad image quality, I took that with my laptop's camera
Fidelator said:
Ok guys so, I had installed badadroid but after reading around the internet about how certain ROM was faster I decided I would try it, I flashed the uninstall zip in the badadroid thread and followed the instructions on the blog of that certain developer HOWEVER at one point I'm asked to flash a new FOTA and bootfiles with multiloader, I did that but at some point I messed up, now my phone boots up to this screen and sometimes to the recovery provided by the other ROM, following the steps to install that ROM and rebooting doesn't help at all and I keep getting stuck in this screen, my phone shuts down automatically a few seconds later and multiloader doesn't recognize it.
I still have hope because, when plugged in, it boots past this screen and into said recovery, however it seems like Bada was wiped during this process and I can't find a way to go back now (I only found out this happened right after I had already done this)
Is there any way to force it into download mode? I need my phone
Thanks
EDIT: Managed to get into download, will see what I can do, I guess I can work things out now, you can close the thread
Also, sorry for the bad image quality, I took that with my laptop's camera
Click to expand...
Click to collapse
In any case, don't worry, you can't break wave so easilly.
This Fota have default boot to android and not bada, and if you installed Nand bada is indeed dead.
But you still can flash full bada with Multiloader and you still can install Android with this fota/bootfiles, just make sure to follow installation procedure of your rom (by the way, this fota is compatible with ALL roms)

elephone p2000 working but totally mesed up, read please and help

hi,
"maybe you saw this post elsewhere but i was forwarded here so the rest is the same"
have elephone p2000 with some custom rom on it and working stock recovery. than i flash new rom called resrom 1.5, rooted BUT internal storage is access denied and 0kb. Just to say that my usb port is broken and will be hard to replace it because someone was trying to make it work and totally screwed up.
So anyway I cannot connect to a pc and fix things. Next, cant access recovery, tried to flash new one but to no avail. I am still rooted but even when using some apk to flash new rom or recovery i get msgs like "not enough space" or nothing is happening.
info on the phone:
ELEPHONE P2000 MT 5692
4.4.2
MOLY.WR8.W1315.MD.WG.MP.V35.P8.2014/11/03
KERNEL 3.4.67 [email protected] #1
BUILD P2000_20150228_RESTORN
Play store ok, calls and the rest is fine, apk i am using: mobileuncle, rashr, auto flasher but nothing gets job done, flashyfy doesn't work and many others. I was looking into init files saw some guide but don t want to mess things even more so i gave up, also wanting to flash boot.img but no proper or functional apk for it.
sometimes on phone start stuck in a loop of screen turn on for 20 sec and then off and its like that until i remove battery, all before rom logo, same thing if i try use buttons combination for recovery or whatever i press in any combination nothing changes.
This is not my first smartphone but is of this kind and funny companies, had problems before with Sony, Samsung but in this extent never, always find YOU guys everybody clever in some fields and as a community more than THE BEST, as you can see i dont post or seek answers by asking, i rather research until now. I fell hopeless, useless and never more stupid, or i m just tired of looking for the answer. In some other case i would give it to my child to play the games an to hell with this phone but its my wife's and she dont want to by a new phone for some reason. Help me to be the man of the house again, kidding, loosing it....
I think I gave you overall picture of the phone state and someone might show me the way to have fully working phone. I forgot, if you are wondering how do i charge battery, well I take it out twice a day and charging on the base of other broken phone, that part i did cover, help me with the rest.
p.s my SD card is working most of the time so this is my only connection to a pc....
Deleted

Categories

Resources