Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Me too?
jjsero7 said:
Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Click to expand...
Click to collapse
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
itfreek said:
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
Click to expand...
Click to collapse
I just got my UK one aswell (32GB) and went through the same path, no CWN and recovery has screwed it for me too, any ideas. Its not even 2 hours old
Got fastboot access, does anyone have a UK sero image I can try or any other advise on how to recover my device ??? Anyone ????
Sorted
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Hisense Sero 7 Pro
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
It will charge
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
megabite said:
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
Click to expand...
Click to collapse
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Alpinestar777 said:
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Click to expand...
Click to collapse
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
uk rom
megabite said:
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
there is a UK rom on this page:
http://forum.xda-developers.com/showpost.php?p=41875861&postcount=2
Martin
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
It's not meant to charge via USB. Plug it into an ac adaptor.
Sent from my M470BSA using xda app-developers app
My tablet is charged but is stuck after it displays Hisense Smart. It keeps on displaying forever. I tried other ROM also, but same results. Any ideas what I can do.
Thanks.
i am facing same problem now
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
when i try to on my hisense sero pro7 after 5/ hour charging it also shows red signal.
dogood1 said:
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
Click to expand...
Click to collapse
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
darmonus said:
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
Click to expand...
Click to collapse
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
dogood1 said:
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
Click to expand...
Click to collapse
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
darmonus said:
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
Click to expand...
Click to collapse
You should be able to install the original rom via fastboot.
I'm assuming that you are at the point where "fastboot devices" shows devices...
You can start off by installing the stock recovery: http://forum.xda-developers.com/attachment.php?attachmentid=2000996&d=1369834980
fastboot flash --RECOVERY stock_boot.img --no-reboot
Then you can grab the stock ROM from the second post in xboxexpert's thread:
http://forum.xda-developers.com/showthread.php?t=2297246
fastboot flash zip [whateverStockRomyougrabbed.zip]
Reboot into recovery and do a factory reset.
I hope that helps. It certainly can't break things worse.
just bricked my tablet. its starting in recovery and thats it
Related
Hi guys, I am feeling really nervous about this... So, the problem is, that I've just rooted my HTC GSM Hero and installed 2.2 ROM (http://forum.xda-developers.com/showthread.php?t=767886). Then I downloaded this app http://forum.xda-developers.com/showthread.php?t=892297. There I chose wrong icon (I didn't notice the icon was for FroydVillain) and rebooted device... Now I can't boot device into normal mode (it shows hero for a while, then turns into black screen, and nothing more happens) or recovery mode (it stucks when it shows HERO). I tried this: http://forum.xda-developers.com/showpost.php?p=4467471&postcount=13 but it didn't work. I'm a complete beginner. Any ideas? Is my device really bricked? THANKS.
Boot into recovery, reflash the room. I dont know why would you anything to spl...
Sent from my HTC Hero using XDA App
brat.haneq said:
Boot into recovery, reflash the room. I dont know why would you anything to spl...
Sent from my HTC Hero using XDA App
Click to expand...
Click to collapse
But I can't boot into recovery... That's the problem... It stucks when it shows HERO
matthew31 said:
Hi guys, I am feeling really nervous about this... So, the problem is, that I've just rooted my HTC GSM Hero and installed 2.2 ROM (http://forum.xda-developers.com/showthread.php?t=767886). Then I downloaded this app http://forum.xda-developers.com/showthread.php?t=892297. There I chose wrong icon (I didn't notice the icon was for FroydVillain) and rebooted device... Now I can't boot device into normal mode (it shows hero for a while, then turns into black screen, and nothing more happens) or recovery mode (it stucks when it shows HERO). I tried this: http://forum.xda-developers.com/showpost.php?p=4467471&postcount=13 but it didn't work. I'm a complete beginner. Any ideas? Is my device really bricked? THANKS.
Click to expand...
Click to collapse
Stay calm... it's not necessarily bricked yet
First thing i would like you to do is charge your phone to max!
Try and turn on the phone and hold to "On" key and "Home" key together for 60 seconds. If this doesn't boot you to recovery, try again one more time! It's happened to me that i didn't realise the button wasn't pressed all the way down.
If that doesn't work then let it boot as normal and even though it goes to the black screen don't panic.
Do you have any of the android tools installed?
http://forum.xda-developers.com/showthread.php?t=502010
See there for help on how to get adb up and running and then come back here.
Another thing i'm curious about while we're here... when you boot the device as normal.. connect it to power, the orange (or green) led at the top should be off for a few seconds while the hero boots up... when it goes to this black screen that you see.. does the light come on?
Bantu85 said:
Stay calm... it's not necessarily bricked yet
First thing i would like you to do is charge your phone to max!
Try and turn on the phone and hold to "On" key and "Home" key together for 60 seconds. If this doesn't boot you to recovery, try again one more time! It's happened to me that i didn't realise the button wasn't pressed all the way down.
If that doesn't work then let it boot as normal and even though it goes to the black screen don't panic.
Do you have any of the android tools installed?
http://forum.xda-developers.com/showthread.php?t=502010
See there for help on how to get adb up and running and then come back here.
Click to expand...
Click to collapse
OK, so, SDK is being installed now, and the phone is charging. What should I do next?
Bantu85 said:
Another thing i'm curious about while we're here... when you boot the device as normal.. connect it to power, the orange (or green) led at the top should be off for a few seconds while the hero boots up... when it goes to this black screen that you see.. does the light come on?
Click to expand...
Click to collapse
When my phone is off, the led is red. When I see that black screen, it is off... Is that bad??
Not necessarily.. it could just mean that it's not finishing it's boot up... let it charge for a while.
Your phone is most likely fine. You just confused it so it can't start up normally. We'll get you back in recovery mode and then you can reinstall your 2.2 rom.
Bantu85 said:
Not necessarily.. it could just mean that it's not finishing it's boot up... let it charge for a while.
Your phone is most likely fine. You just confused it so it can't start up normally. We'll get you back in recovery mode and then you can reinstall your 2.2 rom.
Click to expand...
Click to collapse
So I'll charge the phone the whole night, and I'll try booting it in recovery mode tomorrow morning - I will post the result here Thanks
yes.. if it boots into recovery mode (which it should!) wipe everything and reflash... that should sort you out.
Bantu85 said:
yes.. if it boots into recovery mode (which it should!) wipe everything and reflash... that should sort you out.
Click to expand...
Click to collapse
No, it unfortunately didn't boot.. I left it for an hour but it still didn't help.. I'll retry booting it, but anyway, any more ideas? Anyways, thanks.
Hi there
I'm assuming, that You know how to get into recovery, as You flashed a couple of things. Perhaps Your home key is broken
Question: do You have adb set up on Your computer? if yes - does it recognize Your phone ?
There is always option to run RRU...have You tried that ?
with regards
brat.haneq
have you tried booting holding VOLUME DOWN?
brat.haneq said:
Hi there
I'm assuming, that You know how to get into recovery, as You flashed a couple of things. Perhaps Your home key is broken
Question: do You have adb set up on Your computer? if yes - does it recognize Your phone ?
There is always option to run RRU...have You tried that ?
with regards
brat.haneq
Click to expand...
Click to collapse
Yes, I have ADB, but when I type adb devices, it only writes: "List of devices attached" (does that mean that it recognize my phone?)
I'm not sure I know what RRU is
bonesy said:
have you tried booting holding VOLUME DOWN?
Click to expand...
Click to collapse
Yes, it finds HEROIMG,zip, then loads it, then checks it, and adter that nothing happens - the phone still doesn't boot.
ok, volume down key response is good
ADB apears not to discover Your phone, probably drivers problem ;/
Look for RRU file it's used for factory reseting entire phone.
You can download it from HTC.com site.
With regards
brat.haneq
EDIT: go to htc.com site. look for downlaoding software for Your phone. You will have to provide Your imei. and You will receive .exe file - that You will have to run on Your PC. You can also look for it on this forum, they should be around here somewhere (or perhaps shipped roms.com)
brat.haneq said:
ok, volume down key response is good
ADB apears not to discover Your phone, probably drivers problem ;/
Look for RRU file it's used for factory reseting entire phone.
You can download it from HTC.com site.
With regards
brat.haneq
EDIT: go to htc.com site. look for downlaoding software for Your phone. You will have to provide Your imei. and You will receive .exe file - that You will have to run on Your PC. You can also look for it on this forum, they should be around here somewhere (or perhaps shipped roms.com)
Click to expand...
Click to collapse
When I enter the S/N in the htc.com site, it shows: Sorry, this software download is not suitable for your device. I can download it from xda forum, but will this work?
Maybe there's some way to flash my recovery img via hboot (POWER + VOLUME DOWN)?
Try downloading usbdeview HERE plug the phone in,turn it on,leave it for 10-15 seconds for windows to recognize it...load usbdeview and uninstall and delete anything with android,htc,mass storage or adb in it thats showing as connected (on the right hand side) unplug phone......then download and install HTC Sync HERE let it install,then reboot (to be safe) plug the phone in and let its do its business,DONT let windows search and direct it to program files/htc sync/drivers (or similar) you should then have adb! If you dont it could be a problem with your misc.img i had this with my magic and fixed it with a post on this forum but will post it up if the first bit doesnt work
Any troubles gtalk me [email protected]
matthew31 said:
Maybe there's some way to flash my recovery img via hboot (POWER + VOLUME DOWN)?
Click to expand...
Click to collapse
you have to do that with fastboot
I solved this problem! I just put the correct RUU in my sdcard and named it HEROIMG.zip and then turned on hboot - it flashed the RUU and now I got my phone alive! thanks for your help guys
Sent from my Hero using XDA App
Hello everyone, I know what you're going to say but I did a very wrong move.
I tried flashing recovery image through Rom Manager. It gave me four options and I chose Vega Advent. Now after a reboot, it doesn't even boot. I tried to connect to my PC but the USB doesn't detect a thing. I tried pressing the power button for about half a minute and then I tried pressing the power button together with the volume + and - and all together, but still nothing. I fully charged the battery until the light was green but this didn't make any difference.
The NVFlash always gives me "USB device not detected".
I don't know what to do. I'm in a hurry as I'm leaving the country in a couple of days and I don't have the time to argue with woot.com
I learned a lot from this forum in my HTC Hero, LG Optimus, Samsung Tab and the Asus Transformer. You are my last hope. Is there anyway I can unbrick this? Can I hard reset the device? Can I remove the battery and put it back again? Is there anyway out of this?
Please direct me to the right direction. thanks in advance...
Did you download the adb drivers and boot your gtab holding ppower and vol-
Check out http://viewsonic-gtablet-for-dummies.webs.com/
Mantara said:
Did you download the adb drivers and boot your gtab holding ppower and vol-
Check out http://viewsonic-gtablet-for-dummies.webs.com/
Click to expand...
Click to collapse
Well, I downloaded the usb drivers for the NVFlash. And yes I tried booting the device this way but the PC didn't detect it. The notification of new devices never came up.
What do you think I should do?
What os is your PC running?
You're effed.
You probably got the worst case of rom manager bombshelled. Permanent loop in apx mode + usb recognition borked.
I'm guessing you know how to get into apx mode by power button and volume -. If you haven't tried it, then I strongly you go to the website linked in my signature and go to nvflash page. I just included nvflash stock files with CWM pre-installed.
If you have been using apx mode all this time and nvflash still can't recognize your usb, then you have a nice life.
Windows XP 32 bit
goodintentions said:
You're effed.
You probably got the worst case of rom manager bombshelled. Permanent loop in apx mode + usb recognition borked.
I'm guessing you know how to get into apx mode by power button and volume -. If you haven't tried it, then I strongly you go to the website linked in my signature and go to nvflash page. I just included nvflash stock files with CWM pre-installed.
If you have been using apx mode all this time and nvflash still can't recognize your usb, then you have a nice life.
Click to expand...
Click to collapse
I tried to use your guide, well not from the start unfortunately. I downloaded all the files but I can't get the PC to recognize the gTab or even detect anything when I plug it in.
If I send it back to viewsonic, do you think they can refund back my money or at least send me a replacement (though I'll be leaving)??
Then like goodintentions said check out the link and do it start to finish. The links there are the right files.
I have beard of people recovering from this. Just make sure you have the right drivers installed. They are on the link above.
Check it out, try it start to finish and report back. We are here to help
Mantara said:
Then like goodintentions said check out the link and do it start to finish. The links there are the right files.
I have beard of people recovering from this. Just make sure you have the right drivers installed. They are on the link above.
Check it out, try it start to finish and report back. We are here to help
Click to expand...
Click to collapse
Thanks a lot. I'll try this first thing in the morning as I don't have access to a PC now. I'll definitely report back if the PC recognized the device. Because when it says "USB device not found press any enter to continue" it stop after I press enter. There is no way to make it start to finish...
ahmadshawki said:
Windows XP 32 bit
Click to expand...
Click to collapse
Here's the problem. I didn't think to post the driver for xp 32 because... well, I didn't think anyone was using it nowadays. Going to bed now. You should, too. Check back tomorrow. I'll work modify the website after I get back from my lab.
goodintentions said:
Here's the problem. I didn't think to post the driver for xp 32 because... well, I didn't think anyone was using it nowadays. Going to bed now. You should, too. Check back tomorrow. I'll work modify the website after I get back from my lab.
Click to expand...
Click to collapse
Don't know what to say. This is the best place where someone can get some real help. Just a small question, do you think if I had access to a Windows 7 32 or 64 bit or even Linux, it will help detecting the device? 'coz I can do that...
http://www.slatedroid.com/topic/171...ther-11-or-12-babased on.sed-images-g-tablet/
Link to files and nvflash I used on XP 32. Hope it healps
Xp64 is standard so you can find those files easy but this is what I used and I'm on 32
Mantara said:
http://www.slatedroid.com/topic/171...ther-11-or-12-babased on.sed-images-g-tablet/
Link to files and nvflash I used on XP 32. Hope it healps
Xp64 is standard so you can find those files easy but this is what I used and I'm on 32
Click to expand...
Click to collapse
I'm checking this out now and I'll report back if it worked. Thanks a lot...
http://www.myadventvega.co.uk/SystemUSB.zip
This is the adb driver I used
I wanted to add something. The device feels hot or warm to be precise from the back. Now after unplugging it for about five hours. Do you think it is running and this is only a software problem?
it might be in apx mode now. It is a blank screen. Hold power for 30 seconds and release. That will make sure its off. Then connect it to your PC and hold power volume -
I just helped vvvccc a little over a month ago... see link; my post starts as post #8. Before that, did you try pluggin into a different USB port and/or use a shorter USB cable on the PC?
http://forum.xda-developers.com/showthread.php?t=1056860
While you are at it, you may want to flash just the CWM once your computer recognizes the gtablet in apx.
http://forum.xda-developers.com/showthread.php?t=1058649
If this doesn't work... there are two more options floating around but one involves opening the gtabled up.
--- BTW, stay away from Rom Manager, it's the reason I wrote up the instruction to just flash CWM ---
Any news/progress?
Unfortunately none. I guess I'll go to bed now and tomorrow I'll have access to a linux pc. May be that will be a better idea. Thanks a lot for your support. I'll update you once I do it...
It was indeed working. It stayed like this for more couple of hours. I went to sleep and when I got up it was cold. I pressed the power button and it WORKED. Just like that. Now I shut it down once again and left to charge.
Thanks a lot everyone, I'm so proud I belong to this community.
One last question, what should I do now? Do I still have to NVFlash? Should I flash the right recovery now? Also, which Rom is recommended? At least to start with, knowing that I'm on 1.2.
I've just spent many hours trying to revive my AT&T I777 phone that was running CM9 until I tried to flash it back to bone stock GB, then ICS.
First, I used ODIN to flash the standard default UCKH7 Gingerbread ROM from Sammy via One-Click "I777_UCKH7_OCD_No_BL.7z". After performing the ODIN, the phone flashed successfully and rebooted into a boot loop "Rethink Possible".
I searched for hours to find a solution, but one solution lead to another problem, and so on...
Currently:
- I cannot get into recovery mode, but it boots reliably into download mode. Tried the 3 button tango in EVERY way, but it will only go into DL mode.
- I've tried many different ODIN flashable images per recommendation in this forum, even the one that contains all of the extra files (recommended by creepyncrawly). All flashed fine, but none fixed the boot loop issue.
- Most recommendations say to "wipe/factory reset" to fix the bootloop issue, but I can't do that since I can't get into recovery.
- Tried to do ADB REBOOT RECOVERY, but can't get the driver to connect and list the device. The install guide says to enter "debug mode", but I can't even boot the phone.
- Tried Kies and the phone was not recognized in either DL mode or boot loop. Was hopeful Kies could reinstate the firmware.
I have a physically PERFECT SGS2 I want to sell, and unless I can fix this boot issue, it's nothing but a brick now. Any advice is much appreciated! Pulling my hair out so far...
tone_la said:
I've just spent many hours trying to revive my AT&T I777 phone that was running CM9 until I tried to flash it back to bone stock GB, then ICS.
First, I used ODIN to flash the standard default UCKH7 Gingerbread ROM from Sammy via One-Click "I777_UCKH7_OCD_No_BL.7z". After performing the ODIN, the phone flashed successfully and rebooted into a boot loop "Rethink Possible".
I searched for hours to find a solution, but one solution lead to another problem, and so on...
Currently:
- I cannot get into recovery mode, but it boots reliably into download mode. Tried the 3 button tango in EVERY way, but it will only go into DL mode.
- I've tried many different ODIN flashable images per recommendation in this forum, even the one that contains all of the extra files (recommended by creepyncrawly). All flashed fine, but none fixed the boot loop issue.
- Most recommendations say to "wipe/factory reset" to fix the bootloop issue, but I can't do that since I can't get into recovery.
- Tried to do ADB REBOOT RECOVERY, but can't get the driver to connect and list the device. The install guide says to enter "debug mode", but I can't even boot the phone.
I have a physically PERFECT SGS2 I want to sell, and unless I can fix this boot issue, it's nothing but a brick now. Any advice is much appreciated! Pulling my hair out so far...
Click to expand...
Click to collapse
From powered off, how long are you holding power and vol+ and vol- to get into recovery? On both mine and my wife's phones, I have to hold all three down until the second time the Sammy logo flashes up on the screen. Most people seem to get it after the first time, but I've heard of a few others like mine...
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
From powered off, how long are you holding power and vol+ and vol- to get into recovery? On both mine and my wife's phones, I have to hold all three down until the second time the Sammy logo flashes up on the screen. Most people seem to get it after the first time, but I've heard of a few others like mine...
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
When I hold down the 3 buttons, it never actually shows the Sammy logo. It takes about 8-12 seconds and shows the Download prompt that says "press volume up" to continue to enter DL mode; "press volume down" to cancel/restart. Both of these work fine. If I ignore the prompt and continue holding the 3 buttons, it never does anything else. Thanks for your post.
tone_la said:
When I hold down the 3 buttons, it never actually shows the Sammy logo. It takes about 8-12 seconds and shows the Download prompt that says "press volume up" to continue to enter DL mode; "press volume down" to cancel/restart. Both of these work fine. If I ignore the prompt and continue holding the 3 buttons, it never does anything else. Thanks for your post.
Click to expand...
Click to collapse
Unplug the USB when you do that
Sent from my Galaxy Nexus
Stop using brick. It turns on it is not a brick
Sent from my GS4 running CM11 Kandy Kane
Pirateghost said:
Unplug the USB when you do that
Click to expand...
Click to collapse
It does the same thing whether the USB cable is plugged in or not. However, you gave me an idea...
This phone has been sitting in the drawer for a few months since I got my GNex. When I charged it up, after unplugging the charger the icon stayed with a "plug" symbol on the notify bar as if it was still connected to the charger.
Is it possible the phone is stuck thinking there's a cable plugged in and that's why I can't 3-button boot to recovery? Seems like I've read about other people having connector issues. Does this sound plausible? And if so, what's the best remedy?
tone_la said:
It does the same thing whether the USB cable is plugged in or not. However, you gave me an idea...
This phone has been sitting in the drawer for a few months since I got my GNex. When I charged it up, after unplugging the charger the icon stayed with a "plug" symbol on the notify bar as if it was still connected to the charger.
Is it possible the phone is stuck thinking there's a cable plugged in and that's why I can't 3-button boot to recovery? Seems like I've read about other people having connector issues. Does this sound plausible? And if so, what's the best remedy?
Click to expand...
Click to collapse
A simple Google search is the best remedy. This is one of the most asked questions on this forum.
tone_la said:
It does the same thing whether the USB cable is plugged in or not. However, you gave me an idea...
This phone has been sitting in the drawer for a few months since I got my GNex. When I charged it up, after unplugging the charger the icon stayed with a "plug" symbol on the notify bar as if it was still connected to the charger.
Is it possible the phone is stuck thinking there's a cable plugged in and that's why I can't 3-button boot to recovery? Seems like I've read about other people having connector issues. Does this sound plausible? And if so, what's the best remedy?
Click to expand...
Click to collapse
Could be...Sounds like a symptom of bad or dirty usb port. Try cleaning gently with tooth brush and rubbing alcohol. Dry with canned air if you have some.
Sent from my SGH-I777 using Tapatalk 2
Phalanx7621 said:
A simple Google search is the best remedy. This is one of the most asked questions on this forum.
Click to expand...
Click to collapse
I've tried very hard to not "waste" anyone's time by doing my research, searching, and thinking; BEFORE posting. My question above is not so much "how" to clean the port, but "does this symptom I'm experiencing sound like a 'bad port' issue?". Believe me, I've done tons of searching to try to solve this problem before posting so that I can be worthy of receiving assistance.
And to the guy who says, "don't use the term brick". Sorry I said "Apparent brick"; just looking for some neighborly help to get my phone working again. At any rate, I very much appreciate any advice to help me get this fixed.
Trying hard to keep the forum clean and think for myself when possible!
dandrumheller said:
Could be...Sounds like a symptom of bad or dirty usb port. Try cleaning gently with tooth brush and rubbing alcohol. Dry with canned air if you have some.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Thanks so much for this post, I will do this and post again with the results. Much appreciated!
tone_la said:
Thanks so much for this post, I will do this and post again with the results. Much appreciated!
Click to expand...
Click to collapse
I should elaborate a little for safety's sake - probably a no brainer, but in case - TAKE YOUR BATTERY OUT BEFORE CLEANING THE PORT. Don't know if it matters or not, but I wouldn't want you to short stuff during cleaning - rubbing alcohol IS part water.
Adb wait-for-device reboot recovery
Plug in your phone and let it attempt to boot. If you need adb, use the link in my signature for adb portable. It includes batch files to reboot to download or recovery modes.
This issues the reboot command if at any point in the boot process your phone is detected.
You might want to install the android sdk and ensure you have the nexus drivers installed.
Sent from my SGH-I777 using xda premium
Red_81 said:
Adb wait-for-device reboot recovery
Plug in your phone and let it attempt to boot. If you need adb, use the link in my signature for adb portable. It includes batch files to reboot to download or recovery modes.
This issues the reboot command if at any point in the boot process your phone is detected.
You might want to install the android sdk and ensure you have the nexus drivers installed.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well, I cleaned the heck out of the USB port with rubbing alcohol and a toothbrush, followed by a thorough drying with compressed air. Yes, battery removed during the process; thanks for that! Unfortunately, same exact symptom. Only goes into DL mode and boot loop.
I'll now try your portable adb suggestion and see if I can get a connection.
Does anyone else have any thoughts on what may have gone wrong and/or anything I can flash via ODIN to fix the issue? Many thanks!
Installed your portable adb and followed your instructions. Ran the recovery_mode batch file and adb initialized (daemon not running, starting daemon...) followed by red text "Waiting for your device to be detected". I already installed the Android SDK yesterday and the following modules are installed: Android SDK Tools, Android SDK Platform-tools, and Google USB Driver
Powered on the phone and after a few seconds the "Rethink Possible" logo showed up and shortly thereafter, I heard the computer beep indicating it connected with the phone. Win7 device manager shows "SAMSUNG Mobile USB Modem" under the Modems category.
However, the portable ADB continues to show "Waiting for your device to be detected" and the boot loop continues. Did the same thing in DL mode, same result.
I reinstalled the Samsung I777 driver from Samsung's site. Going to reboot my PC now to see if that makes a difference.
Reboot did not help. Seems like the phone is not being identified as "Android Composite ADB Interface", and therefore ADB cannot see the phone. I've looked for other drivers, but no matter what I've tried, the SGS2 I777 shows as "SAMSUNG Mobile USB Modem" under the Modems category in Win7 Device Manger.
Any advice on ADB here? Doing the best I can, but keep running into stops. Thank you
tone_la said:
Reboot did not help. Seems like the phone is not being identified as "Android Composite ADB Interface", and therefore ADB cannot see the phone. I've looked for other drivers, but no matter what I've tried, the SGS2 I777 shows as "SAMSUNG Mobile USB Modem" under the Modems category in Win7 Device Manger.
Any advice on ADB here? Doing the best I can, but keep running into stops. Thank you
Click to expand...
Click to collapse
Try in Linux? Make yourself an ubuntu live CD and go from there? As long as you have the most current drivers, it should work in Win - unless the problem is a totally hosed USB port??
Tried these? http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-II-i777-USB-Driver-for-AT-T.shtml
dandrumheller said:
Try in Linux? Make yourself an ubuntu live CD and go from there? As long as you have the most current drivers, it should work in Win - unless the problem is a totally hosed USB port??
Click to expand...
Click to collapse
Why would it work better in Linux? I'm willing to try this, but fairly unfamiliar with Linux.
Phalanx7621 said:
Tried these? http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-II-i777-USB-Driver-for-AT-T.shtml
Click to expand...
Click to collapse
I used the Samsung drivers. Kinda leary of these drivers from softpedia. They download as SETUP.EXE and seem like inauthentic/spyware.
After many many hours of frustration and dead ends, I've finally recovered my phone! YAYYYYY!!!!!
Here's how I got it done...
- No matter what I flashed, I kept getting the boot loop. This was really throwing me for a "loop" when I thought I was flashing standard original Sammy full ROM with ODIN; yet that wasn't enough to recover the phone.
- Something was missing with the boot process, so I started looking for CWM that I could flash via ODIN. Most sites had the zip CWM file, but only a few had the TAR file. Finding a valid file proved more difficult than I thought with all the download sites that went offline for legal reasons. But I did find one!
http://www.mediafire.com/?bjhx33o4viz8tza
The above link is for file name: SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar
- Once I installed the above via ODIN, all of a sudden ADB recognized the phone and I was able to run: ADB REBOOT RECOVERY
It's very possible that the 3-button recovery may have worked too, but when I saw the device show up on ADB, I didn't want to take the chance.
- The device then rebooted and entered RECOVERY mode! FINALLY!!!!
- I then did a factory reset / wipe and rebooted the phone. It came up just fine, NO MORE BOOT LOOP!
Thanks to those who replied to this thread. The responses helped me think hard about what was going wrong and ultimately I dug up a solution.
I have a problem with unlocking the bootloader, the phone just reboots August, every time I wait about 35 minutes from the restart for the next operation.
My soft is V20B
Adds video.
Sorry for my english I use google translator
Please help
youtube.com/watch?v=TXYXIAeM-1M
myju said:
I have a problem with unlocking the bootloader, the phone just reboots August, every time I wait about 35 minutes from the restart for the next operation.
My soft is V20B
Adds video.
Sorry for my english I use google translator
Please help
youtube.com/watch?v=TXYXIAeM-1M
Click to expand...
Click to collapse
Hello myju. It looks like you are trying this method: http://forum.xda-developers.com/showthread.php?t=2190326
Post your issue in that thread. The people there should be able to help.
I do not have 10 posts and I can not write in the subject ...
myju said:
I do not have 10 posts and I can not write in the subject ...
Click to expand...
Click to collapse
OK. Post some more info here, and in will try to get someone to help. maybe we can get your post count high enough.
ADB detects the phone, installed the drivers on OMAP 4430.
I tried it on Ubuntu, if you type the command "adb reboot oem-unlock" it was the same as on Windows 7
Already did it,
I have uploaded the new ROM V20B and restored the factory settings, the bootloader unlocked.
Thank you for your help
myju said:
Already did it,
I have uploaded the new ROM V20B and restored the factory settings, the bootloader unlocked.
Thank you for your help
Click to expand...
Click to collapse
WooHoo!
myju said:
Already did it,
I have uploaded the new ROM V20B and restored the factory settings, the bootloader unlocked.
Thank you for your help
Click to expand...
Click to collapse
Which variant you have? P765 / P760 / P768 / P778? Which country rom you tried, etc.
Always provide all the information in first request so people will start thinking what might have happened? This phone is really bit difficult due to various variants and rom+hardware non-compatibilities.
Kevev just PM'ed me that myju figured out the problem. And I told him this in PM...May be this is not the case here, but this generally happens. He he he
@kevev, Do you know, when there is a silly question from noobs, leave it for some time without answering. And they get impatient and frustrated and they start reading the whole OP carefully and do things in right way. lolz experienced many a times and always worked. ha ha ha
hello, i hope i am posting in the right thread. I have a lgp769 that will not power on, will not boot into anything except fastboot. is there something that I can flash to the phone in fastboot that will at least allow me to boot into a recovery of some kind so that I can get my phone back to stock.
brickedmyphone123 said:
hello, i hope i am posting in the right thread. I have a lgp769 that will not power on, will not boot into anything except fastboot. is there something that I can flash to the phone in fastboot that will at least allow me to boot into a recovery of some kind so that I can get my phone back to stock.
Click to expand...
Click to collapse
You need to do the online recovery option with LG PC suite, put the phone in S/W upgrade mode. Turn off then plug in USB with 'Vol Up' held. Then use PC suite, and click on Recovery Phone Mode or something and it should flash full stock on your phone, you may have to format data if the phone doesn't boot after the update (Vol Down + Home + Power)
Sent from my LG-P768
donk165 said:
You need to do the online recovery option with LG PC suite, put the phone in S/W upgrade mode. Turn off then plug in USB with 'Vol Up' held. Then use PC suite, and click on Recovery Phone Mode or something and it should flash full stock on your phone, you may have to format data if the phone doesn't boot after the update (Vol Down + Home + Power)
Sent from my LG-P768
Click to expand...
Click to collapse
Hey thanks for your reply. I appreciate your help. I am unable to boot into S/W upgrade mode because the phone has no software on it, powers on to a black screen without a bootloader. I was hoping that someone might be able to tell me what I'd need to copy to the various partitions on the phone to get it back in working condition - at least enough to get it back to stock. I can get the phone to power on and boot into fastboot and I've played around trying to copy bootloaders and stuff to the phone but I must not be either doing it right or getting the right software for the correct phone. I accidently flashed the phone with the wrong software and through many mistakes ended up wiping all of the partitions on the phone...perhaps some kind person here might be able to provide the images i'd need and how to use fastboot to copy them to the phone, I'd truly appreciate the help as this is my only phone and been without it for a couple days (won't be trying to flash firmwares again if i can get the phone back up and working) much thanks
---------- Post added at 04:22 PM ---------- Previous post was at 03:58 PM ----------
I noticed a thread on how to restore a Nexus 7 through fastboot, and was hoping a similar method would work for the LG but can't find an image of the phone that will work with fastboot
If you're talking about what I think you are, you need to fastboot flash u-boot, x-loader, and recovery via fastboot. You can't do system via fastboot because the file size it too big. I ran into that problem once by accidentally flashing wrong u-boot and then erasing all partitions out of frustration. I don't think recovery Idk 100% necessary as long as you can boot into s/w update mode, which I believe is intertwined somewhere in the u-boot or x-loader.
Once you get the phone to load inti s/w mode, you're set to flash kdz.
Sent from my LG-P769 using xda app-developers app
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Gariep said:
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Click to expand...
Click to collapse
Can you get to download mode...and hit us with more info....ROM....kernel.....recovery......rooted........?
Gil81 said:
Can you get to download mode...and hit us with more info....ROM....kernel.....recovery......rooted........?
Click to expand...
Click to collapse
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hold volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Gariep said:
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hlod volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Click to expand...
Click to collapse
If you're not rooted you might want to take it in to be looked at.. If you don't want to do that..We can Odin a one-click onto it and get you back up.. From there you could root or put a custom ROM of you're liking on it.. But first if I was you I would drain the power all the way off it..( tape the power button down or use rubber bands ) for a few days.. Then plug it in..if the charging animation comes up then..let it charge..when it gets above 60 or so percent..you can try toturn it on.. If that doesn't work and you don't want to go the Odin route hit me back and we can try a factory reset.. I'll walk you through it.. Let me now you're decision...
Gil81 said:
If you're not rooted you might want to take it in to be looked at.. If you don't want to do that..We can Odin a one-click onto it and get you back up.. From there you could root or put a custom ROM of you're liking on it.. But first if I was you I would drain the power all the way off it..( tape the power button down or use rubber bands ) for a few days.. Then plug it in..if the charging animation comes up then..let it charge..when it gets above 60 or so percent..you can try toturn it on.. If that doesn't work and you don't want to go the Odin route hit me back and we can try a factory reset.. I'll walk you through it.. Let me now you're decision...
Click to expand...
Click to collapse
i already tried to drain the power...
I will try what you suggest me.
i saw that there was a guide for rooting with 4.0.4 rom.
should i use this guide? i'm i better with another rom?
Thank you!
Gariep said:
I will try what you suggest me.
i saw that there was a guide for rooting with 4.0.4 rom.
should i use this guide? i'm i better with another rom?
Thank you!
Click to expand...
Click to collapse
Let's just try to get it back up..before we go flashing firmware.. Do you know for sure what tablet version it is...
Gil81 said:
Let's just try to get it back up..before we go flashing firmware.. Do you know for sure what tablet version it is...
Click to expand...
Click to collapse
i will get back later... i have to go to work.
The only thing i'm sure about is that it's a GT-P7510
Is the version write on the back of the tab?
I don't have the tab with me right now.
Will check later.
Thank you!
Gariep said:
i will get back later... i have to go to work.
The only thing i'm sure about is that it's a GT-P7510
Is the version write on the back of the tab?
I don't have the tab with me right now.
Will check later.
Thank you!
Click to expand...
Click to collapse
If it is the gt-p7510...then it is the WiFi only version..if this is correct I will hunt up the zip files we need to get you back up...they are kinda spread out...I have most of them though..ttyl
Gil81 said:
If it is the gt-p7510...then it is the WiFi only version..if this is correct I will hunt up the zip files we need to get you back up...they are kinda spread out...I have most of them though..ttyl
Click to expand...
Click to collapse
Yes it is the wifi version only
Gariep said:
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hold volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Click to expand...
Click to collapse
Did you have usb plugged in when you tried to enter download mode?
If so, try without usb.
tys0n said:
Did you have usb plugged in when you tried to enter download mode?
If so, try without usb.
Click to expand...
Click to collapse
thank for your answer.
i tried both with usb plugged and unplugged
Gariep said:
thank for your answer.
i tried both with usb plugged and unplugged
Click to expand...
Click to collapse
OK..I'm back home... .. So you have the device unplugged.. Then hold down the power button and volume down button( closest to power button ) at the same time...( hold for a min ).. If it starts showing the Samsung animation keep holding until a screen comes up with a box like object on the left and an android on the right..I think its an android on the right..Might be something else,but there will be just two things ( choices on the screen )...If you get this far.. I'll walk you through a factory reset..Or we might just wipe cache first and see if it boots.. Then a factory reset..
Gil81 said:
OK..I'm back home... .. So you have the device unplugged.. Then hold down the power button and volume down button( closest to power button ) at the same time...( hold for a min ).. If it starts showing the Samsung animation keep holding until a screen comes up with a box like object on the left and an android on the right..I think its an android on the right..Might be something else,but there will be just two things ( choices on the screen )...If you get this far.. I'll walk you through a factory reset..Or we might just wipe cache first and see if it boots.. Then a factory reset..
Click to expand...
Click to collapse
I tried to hold it for 2 minutes but nothing...
Gariep said:
I tried to hold it for 2 minutes but nothing...
Click to expand...
Click to collapse
Put it on the wall charger and see if the charging animation comes up....if it does...let it charge.. I think we can get it into recovery or download mode if not recovery....if we get to recovery... You will probably have to do a factory reset,but I want you to tell me what options you have in recovery.. been a while since I seen stock recovery..can't remember ..We'll proceed from there..if the charging animation doesn't come up..let it charge anyway... I need to see where it stands so I can help you proceed correctly.......Just looked at stock recovery..we will have to do a factory reset...
@Gil81
If you need any missing files I can set up a dropbox (which I was thinking of doing anyway)...I have boot images, recovery images, system dumps from early releases, nvflash, boatloader and all the rest. Think the battery drain looks the only option for him at moment.
Sent from my GT-P7510 using XDA Premium 4 mobile app
stinky73 said:
@Gil81
If you need any missing files I can set up a dropbox (which I was thinking of doing anyway)...I have boot images, recovery images, system dumps from early releases, nvflash, boatloader and all the rest. Think the battery drain looks the only option for him at moment.
Sent from my GT-P7510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you guys,
that was the first thing i tried. nothing appear on screen.
I'll try again but i don't think it will change something...
Gil81 said:
Put it on the wall charger and see if the charging animation comes up....if it does...let it charge.. I think we can get it into recovery or download mode if not recovery....if we get to recovery... You will probably have to do a factory reset,but I want you to tell me what options you have in recovery.. been a while since I seen stock recovery..can't remember ..We'll proceed from there..if the charging animation doesn't come up..let it charge anyway... I need to see where it stands so I can help you proceed correctly.......Just looked at stock recovery..we will have to do a factory reset...
Click to expand...
Click to collapse
Ok so i get nothing on screen when i tried to power it up or boot in download mode. after a 1:30 charge time.
i let it charge for 5 hours and it didn't change anything.
I opened the tab and unpluged the battery press the power button for a few seconds and plug it back. Didn't change anything.
Is there something else i should try?
Thank you
Gariep said:
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Click to expand...
Click to collapse
Since you state that it powers up into apx mode and can't seem to get it to do anything else. I'm afraid you're in a situation I encountered over a year ago. I was unable to find anything to help while only in apx mode. I ended up sending it in for repair. The battery drain method has work for some and I used to point people to the post. It seems that most people having issues similar to yours were not getting any results from it recently.
Hopefully someone does have something that will help you get back out of apx mode.
I wish you the best of luck.
Sent from my GT-P7510 using XDA Premium HD app
Gariep said:
i let it charge for 5 hours and it didn't change anything.
I opened the tab and unpluged the battery press the power button for a few seconds and plug it back. Didn't change anything.
Is there something else i should try?
Thank you
Click to expand...
Click to collapse
What do you mean ( opened the tab )...I got ya..had to re-read the thread..Sorry..but I'm helping 4 people in two different threads... .. I think the power drain might be you're only solution at this point...if you have already tried that by pulling the battery..then youre going to have to take it in I think...Sorry I couldn't be more helpful...let me now what ya think...