[Q] Stuck at Boot screen, how to recover? - Verizon Samsung Galaxy S 4

Just bought a used phone off Swappa. It has TWRP and had Cyanogenmod installed.
I wanted to try a TouchWiz ROM so I downloaded one. Booted into recovery, made a backup to external SD Card and then flashed the ROM. It said it flashed
successfully but when rebooted, it just stayed at the Samsung Galaxy S4 Boot
screen.
I tried restoring the backup, but it failed!
I thought I might have had a bad download so I downloaded Cyanogenmod nightly and LiquidSmooth on my laptop, transfered to the SD card, popped it into the S4, boot into recovery, and tried flashing each, and both just boot to the boot screen and freeze.
What are my best options now? I saw some guides for flashing back to stock via Odin, but requires that I know if I am on VRUAME7 or VRUAMDK and I don't know. Could I have been on ME7 and running Cyanogenmod? Doesn't seem possible, no?

Me7 ota doesnt have the ability to flash custom recovery or rom, so no you werent on that beforehand. Whenever you flash a rom you need to do a wipe/factory reset and wipe caches, unless op states you can dirty flash. Doing some reading will only help you out, generally every post outlines the installation process. Boot to recovery do your wipes then try booting again. If your still in a bootloop then you will need to flash mdk via odin then start the rooting and romming process over.
Sent from my SCH-I545 using Tapatalk 2

Man, I thought I did everything right.
First, did a backup.
Then full wipe with TWRP full wipe, including cache.
Then flash ROM
I'll have to get familiar with Odin and find the MDK images.

Sometimes that happens. Could have been a bad download then it happens more often then you would think. If theres an md5 hash posted its a good idea to verify the download is good. In the dev section theres no wipe mdk images posted so you wont lose your already installed apps and data.
Sent from my SCH-I545 using Tapatalk 2

So I downloaded the factory image and flashed via Odin, but accidentally flashed via bootloader rather than PDA. It wouldn't start - still hung at the boot screen, so I re-flashed via PDA and it is still hanging at the boot screen.
Now I don't know if it is just the same problem as before, or if I messed something up with flashing through bootloader. Can I reflash something via the bootloader section of Odin to restore it?

What version of twrp? And try to go back into recovery and wipe cache and dalvik.
That worked for me on the buggy version of twrp when it wouldn't booy
Sent from my SCH-I545 using Tapatalk 2

twiz0r said:
What version of twrp? And try to go back into recovery and wipe cache and dalvik.
That worked for me on the buggy version of twrp when it wouldn't booy
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Not sure what version it was because it's now back to factory recovery. I did go back into it and did a factory wipe and it booted!

Related

bricked, again

I just did the biggest F-Up of my flashing life. While following QBKing77's Rooting & CWM with unlocked, at approx 3:50, during the flashing of the root SYSTEM.img file, rather than that file, I used the wrong file to flash used an IMG file that was meant for cwm, which is a completely different task.
So now I am trying to get into fast boot and try to do it with correct SYSTEM.IMG, then to find out I never got it downloaded, the link was deadand now I can not find where to DL it from. I must've not been paying attention and got ahead of myself.
Anyone know where I can a mirror of the file found here. Its the first link in the root section labelled "moto-fastboot flashable /system image".
Am I screwed? Does anybody have a copy of that system.img file laying around. I can not find any mirrors. That is the only way I can see this getting fixed bc I can still go into fastboot mode.
ckeck this ????
http://rootzwiki.com/topic/4137-pudding-photon-pudding-bootloader-unlock-updated-8302011/
Use at own risk. ???
Can u get into rsd mode and flash 154_5 sbf
Sent from my MB855 using xda premium
Important files
Thank shabbypenguin for those
If you can get into rsd mode and connected/recognized in rsd lite you should be able to flash one of those sbf files and return to stock.
I read the instructions carefully! It said to put the oven on 350 degrees for 10mins but for some out of this world reason I put it on broil and let it cook for 20mins :/
Sent from my MB855 using XDA App
LOL no kidding Custodian. I did get a laugh out of that.
Thanks CubanLuke & ShabbyPenguin. I did use RSDLite to flash the current sbf you directed me to, I can boot into the phone again. Thanks again.
Now as to how to proceed, I will have to unlock the bootloader again, np, but when I run into that very step where I broiled it, the rooting via speedboot.... would it be okay to root using AIO instead because I can not find the SYSTEM.IMG needed to follow along w/ the video using this method.
Can I just root a different method, then proceed on with CWM recovery, then flash rom from the video?
enzyme said:
LOL no kidding Custodian. I did get a laugh out of that.
Thanks CubanLuke & ShabbyPenguin. I did use RSDLite to flash the current sbf you directed me to, I can boot into the phone again. Thanks again.
Now as to how to proceed, I will have to unlock the bootloader again, np, but when I run into that very step where I broiled it, the rooting via speedboot.... would it be okay to root using AIO instead because I can not find the SYSTEM.IMG needed to follow along w/ the video using this method.
Can I just root a different method, then proceed on with CWM recovery, then flash rom from the video?
Click to expand...
Click to collapse
- Unlock using derpunlock.sbf
- use fastboot to erase recovery and install CWM recovery
- boot into CWM
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
SOLVED!!! THANK YOU EVERYONE!
KTT16 said:
- Unlock using derpunlock.sbf
- use fastboot to erase recovery and install CWM recovery
- boot into CWM
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
Click to expand...
Click to collapse
Thanks KTT. Okay, I'm back on track now. I am unlocked again, rooted as well. but I am not sure about 2 things. This will be my very first android rom flash and just coming from a big whoopsies, I just want to be sure.....
1) Format system: in cwm recovery, which option is that? I don't see "format system" in the main or advanced menu. Maybe its worded differently?
2) Flash ROM: I can only assume its either "Apply Update from SD" or Update from SD". Not sure which one though.
enzyme said:
SOLVED!!! THANK YOU EVERYONE!
Thanks KTT. Okay, I'm back on track now. I am unlocked again, rooted as well. but I am not sure about 2 things. This will be my very first android rom flash and just coming from a big whoopsies, I just want to be sure.....
1) Format system: in cwm recovery, which option is that? I don't see "format system" in the main or advanced menu. Maybe its worded differently?
2) Flash ROM: I can only assume its either "Apply Update from SD" or Update from SD". Not sure which one though.
Click to expand...
Click to collapse
1) Format system is in the "mount" options. Although it's unneeded to flash a ROM. Personally I just wipe data/factory reset and then wipe cache and have zero issues. Others may tell you different though.
2) "Install .zip from SD Card" then select whichever .zip you're looking to install.
Sent from my MB855 using xda premium
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Flashing the 198_7 sbf unroots and relocks, so you're back to square one.
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Reboot into stock recovery, when you get the recovery logo thing push both volume up and volume down at the same time to get the recovery options. Then do a factory reset and it should boot for you. After that, root and unlock again. And you didn't have the Market because you forgot to install Gapps...
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
The reason cm7 didn't have the market is that you needed to flash gapps. Try doing a hard reset. http://www.hard-reset.com/motorola-photon-4g-hard-reset.html That should do it.
try the 154 sbf
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
i had the same problem i think and was going thru boot loops but some one told me to start into recovery when you try you get that ? android screen from there hold down volume up and down at same time then wipe phone booted up fine after that.
It worked like a charm. Thanks. I'm still very new to android and hate to admit it but will be running into problems like these again. The best way to minimize it for me is, not only follow certain directions correctly to get out of these binds, but to understand them.
- So theres an image of the stock ROM stashed away on the phone regardless? And it can be accessed only via the stock recovery? Because after I succeeded in flashing cm7.1, I did a factory reset once from settings>privacy and that restored me to a fresh CM7.1. The factory reset from settings>privacy and in CWM is the same, but both different from the factory reset via STOCK RECOVERY?
- Also what would be the correct method to go from one custom ROM to another? Would it be this? :
(in CWM)
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
Or can I just jump to install from zip ?
- Also regarding SD Storage (internal), only holds storage files? So on any fresh ROM there shouldn't be anything in that partition relating to that new ROM yet right? So I can delete things without worry?
You should not have to reboot into recovery, once your wipes are complete, normally you can just flash your ROM of choice in the same recovery session.
Before I flashed anything I would make a backup with CWM so you don't have to keep rooting and unlocking. You can just restore your backup.
Sent from my MB855 using xda premium
After flashing 198 7 sbf, all u need to do is flash derpunlock not go through oem unlocking, then reflash recovery.
Simple generic process for going between roms (assuming already unlocked + cwm recovery flashed; process may be different for some roms, always make sure to read directions, but this is the general concept)
1. Download rom (and gapps if necessary) and put on your sdcard
2. Boot into recovery and make a nandroid backup
3. You made a nandroid backup right?
4. Secure your nandroid backup (move it to your pc or something).
5. You know where your nandroid backup is right?
6. Wipe data/factory reset.
7. Install zip from sd (flash), choose the rom.
8. Reboot system.
At this point your rom should be all set. If for some reason you don't like it, simply boot into recovery and restore your nandroid backup. You can even make nandroid backups of various roms if you want to swap between them for whatever reason.

[Q] Trying to restore to ATT stock, locks at ATT "rethink..." screen

Hello all, could use some help here.
I'm trying to restore my Note to the factory ROM and I'm running into an issue.
Fyi, I had the latest Paranoid JB Rom from Oct 13.
I followed the proceedures outlined in the forums (used ODIN to restore the default "attstockrom") and after that restore the phone would loop rebooting into ATT rethink possible animation screen.
I found and downloaded the latest 4.04 rom for the phone (I717UCLF6) and rebooted. Now it just hangs at the "ATT Rethink possible" graphic (no animation, no loop).
Odin does see the device fine so I can reflash again with no problems if I need to. I'm thinking of trying the I717UCLA1 version from Jan to see if that works but I'm hoping I can get some better advice before I do something that might cause more permanent problems.
Any advice on how to get back to stock ICS (or even JB) and get the phone working again?
Thanks!
Try doing a factory data/cache wipe from Recovery.
I flashed the stock rom via ODIN. There is no factory data/cache wipe since there's no custom recovery.
Are you suggesting flashing CWM/TWRP on the phone now then doing that?
Houston we have liftoff. Thanks for the tip Fappa, that got me into the phone (reinstalled cwm, factory reset). However I'd still like to remove CWM and go back to completely stock....
I'm not overly worried about it as I'm selling the phone but I'd like the new owner to have a completely clean phone in case they need to send it in at some point for repair. But in any case it's up and running with CWM and factory ICS rom.
santiagodraco said:
I flashed the stock rom via ODIN. There is no factory data/cache wipe since there's no custom recovery.
Are you suggesting flashing CWM/TWRP on the phone now then doing that?
Click to expand...
Click to collapse
I'm sure fappa meant to use the stock android recovery and wipe. when I go back to stock it always hangs at AT&T boot logo and have to wipe/reset from stock recovery to get it to boot.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Yes do what they say or you will continue to boot loop.
Sent using cheezoline.

TWRP or CWM

Hey guys,
I was just wondering what the general consensus is on which recovery is the most preferred.
I was using TWRP 2.6, but that gave me problems (being stuck on samsung logo everytime my phone rebooted). Reverted back to 2.5.0.2 and it seems to work fine so far. I did try CWM in the past but for some reason my boot loader would get locked and I would have to ODIN back to stock.
So what's your preferred recovery and why?
Thanks.
Exodus885 said:
Hey guys,
I was just wondering what the general consensus is on which recovery is the most preferred.
I was using TWRP 2.6, but that gave me problems (being stuck on samsung logo everytime my phone rebooted). Reverted back to 2.5.0.2 and it seems to work fine so far. I did try CWM in the past but for some reason my boot loader would get locked and I would have to ODIN back to stock.
So what's your preferred recovery and why?
Thanks.
Click to expand...
Click to collapse
I like TWRP. It works well with the new phone and Roms that are coming out plus it is so easy to use. Never liked CWM very much. You did right by reverting to an older version of TWRP I had to do that once.
TWRP... i don't even consider anything else.
Do you guys know why my phone gets stuck on the samsung logo everytime i restart my phone?
Doesn't matter what ROM i use it always happens....
Did you do a factory reset, system wipe, preload wipe, cache wipe, and dalvik wipe? Or try fix permissions from recovery?
If not, go do all of those.
If that doesn't work, something is missing from the system partition that is keeping it from booting. Which means you deleted it. :good:
Dubbsy said:
Did you do a factory reset, system wipe, preload wipe, cache wipe, and dalvik wipe? Or try fix permissions from recovery?
If not, go do all of those.
If that doesn't work, something is missing from the system partition that is keeping it from booting. Which means you deleted it. :good:
Click to expand...
Click to collapse
I did ALL of those, still have the problem.
So.... I just ODIN-ed back to stock and going to root and basically re-do everything -_-

[Q] Issues after switching to cwm from twrp

Been using twrp since rooting note II. I wanted to try out 4.4 PA but they said to only use cwm. It was late so I decided to be lazy and since I used to use rom manager all the time I installed it to flash cwm recovery then booted into recovery to install touch version. It wasn't showing the touch version so selected to restart to check to see where I saved it to it would not boot past the first "note II" splash screen. Battery pull then back into recovery and went ahead and flashed PA 4.4 and now it will get past the splash screen then shows boot animation but then starts all over.
Is this a rom manager issue?
can I flash twrp from within cwm recovery?
will I have to basically reroot it?
Any suggestions on how to get back to twrp and to a usable phone?
thanks
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Nope did my standard wipe cache, wipe dalvik, and factory reset then flashed rom then gapps. Going to go back to twrp and wait for 4.4 to be more stable before I try it out again and maybe then I can use twrp to flash it.
thanks for the help
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
jdpeck said:
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
Click to expand...
Click to collapse
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
fallingup said:
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
Click to expand...
Click to collapse
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
jdpeck said:
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
Click to expand...
Click to collapse
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
fallingup said:
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
Click to expand...
Click to collapse
Finally got it. Thought using odin to flash back to root 66 and start fresh would work but after that it was still going to the splash screen then black and a battery pull had to be done. TWRP back ups would fail when trying to restore, so I reverted back to an older version of twrp and it finally let a back up be installed and it booted up just fine!!
thanks for all the suggestions
Im having a similar problem to yours, I am using twrp and flashed PA 3.99 the phone works great, but if my battery dies or i restart the phone or shut it down it automatically wont get passed the samsung logo, or sometimes the PA logo, the only work arounds ive seen to it is to wipe the cache and dalvik to boot, but when that fails i have to install the whole rom over again. any ideas?

Can't get a rom to boot

Hey guys, I kinda at my wits ends.
I have a Note 2 and I was running Sophisticated rom 3.1 just fine. I wanted to try Beans new Alliance 23 Rom. So I booted into TWRP 2.6.3.1 and backed up Sophisticated 3.1 first, then wiped everything and flashed Beans 23. Phone would not get past the boot animation. I tried to use the restore I had just created and TWRP fails. Tried upgrading TWRP to 2.6.3.2, didn't work, now any rom I try to install or recover from I get errors in TWRP saying too many files open and a second one about data/data/com.contacts. I tried Philz CWM recovery, I even tried downgrading back to TWRP 2.6.3.0 and nothing. I can not get a rom to boot past the boot animation. Please help. I have unlimited data and I can't go use an upgrade.
Dugall12 said:
Hey guys, I kinda at my wits ends.
I have a Note 2 and I was running Sophisticated rom 3.1 just fine. I wanted to try Beans new Alliance 23 Rom. So I booted into TWRP 2.6.3.1 and backed up Sophisticated 3.1 first, then wiped everything and flashed Beans 23. Phone would not get past the boot animation. I tried to use the restore I had just created and TWRP fails. Tried upgrading TWRP to 2.6.3.2, didn't work, now any rom I try to install or recover from I get errors in TWRP saying too many files open and a second one about data/data/com.contacts. I tried Philz CWM recovery, I even tried downgrading back to TWRP 2.6.3.0 and nothing. I can not get a rom to boot past the boot animation. Please help. I have unlimited data and I can't go use an upgrade.
Click to expand...
Click to collapse
I am using twrp 2.6.3.1. I would reflash the recovery. Then I would wipe everything except your external SD card. I have noticed that if I don't wipe my internal SD for awhile I will start having goofy stuff happen. That usually fixes any issues I have.
Sent from my SCH-I605 using Tapatalk
Yeah, I tried all that as well. Rehashed that version the new version and the older version then tried Phil's, tried wiping internal, external and still had errors. I had to bite the bullet and Odin back to stock 4.1.2 then jailbreak again and after a day lost I finally got it back up. I'm leaving TWRP 2.5 on it
Sent from my SCH-I605 using xda app-developers app

Categories

Resources