long story short i have to send in my phone for repairs i was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
Ok now dont panic !
Does your phone still have eat least 70% of battery left ? if yes then reboot into the bootloader and relock it and then run the RUU file whitch will return your phone back to stock,and for more detailed info im sry beacuse im currenty on my phone
Sent from my HTC One X using xda premium
Lord_Xovon said:
long story short i have to send in my phone for repairs i was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
Click to expand...
Click to collapse
if your hboot is 1.40 - there is no stock ROM available.
You need to sideload some other custom ROM.
i face same problem
was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
now my fone stop on htc logo
plz help help
i try found same ruu file but not found plz help
ENRC2B_U pvt ship s-on rl
hboot_1.35.0000
cpld_none
microp_none
raido-3.1204.168.32
emmc-bootmode:disabled
cpu-bootmode:disabled
hw secure boot:disabled
modem path : off
nov 14 2012, 16:38:06
soy2 said:
i face same problem
was trying to get rid of my custom rom and install a stock rom but some how i wiped out the entire phone i do however managed to get twrp recovery but can't really do much in there as no files are in my phone and it wont let me side load the stock rom help please?
now my fone stop on htc logo
plz help help
i try found same ruu file but not found plz help
ENRC2B_U pvt ship s-on rl
hboot_1.35.0000
cpld_none
microp_none
raido-3.1204.168.32
emmc-bootmode:disabled
cpu-bootmode:disabled
hw secure boot:disabled
modem path : off
nov 14 2012, 16:38:06
Click to expand...
Click to collapse
Unlock bootloader
Install TWRP 2.6 etc...
use adb sideload <rom.zip> to sideload the custom ROM
try it a number of times as it takes time to get recognized...
flash the kernel
Addicted2xda said:
Unlock bootloader
Install TWRP 2.6 etc...
use adb sideload <rom.zip> to sideload the custom ROM
try it a number of times as it takes time to get recognized...
flash the kernel
Click to expand...
Click to collapse
I have the same issue i unlocked and rooted my phone and went to flash a custom ROM when something went wrong...long story short i ended up wiping my entire phone, i relocked the phone and tried to flash the factory RUU using the all in one toolkit but i couldnt find and RUU.zip file please help
Everything you need to fix your device is here
Read and search. This has been covered 1000000 times.
brenntard said:
I have the same issue i unlocked and rooted my phone and went to flash a custom ROM when something went wrong...long story short i ended up wiping my entire phone, i relocked the phone and tried to flash the factory RUU using the all in one toolkit but i couldnt find and RUU.zip file please help
Click to expand...
Click to collapse
What is your hboot version?
I hope you have Android SDK installed and running in your system?
I guess I have just run into the same issue. I wasn't able to find any help in the "Device Essentials" thread, unfortunately.
I have no rom. ADB doesnt work when phone is in bootloader or recovery (twrp 2.6.3.0) and I can't mount the usb storage to get the rom onto my phone. I miss the days of my samsung captivate....It was so easy!! Thanks for reading.
I guess the key point here is that I can't sideload anything because adb isnt working in recovery. My hboot is 1.40.
1 25664338
TheJokah said:
Everything you need to fix your device is here
Read and search. This has been covered 1000000 times.
Click to expand...
Click to collapse
Thank you but those links on that page do not work
brenntard said:
Thank you but those links on that page do not work
Click to expand...
Click to collapse
Which version do you have ATT-Telus or International?
Did you try one of the toolkits like Windroid or Hasoons Toolkit. I would use Hasoon2000's first to return device to stock condition, and then try Windroid if that does not work.
TheJokah said:
Which version do you have ATT-Telus or International?
Did you try one of the toolkits like Windroid or Hasoons Toolkit. I would use Hasoon2000's first to return device to stock condition, and then try Windroid if that does not work.
Click to expand...
Click to collapse
i have the AT&T version with hasoons att htc one x all in one toolkit downloaded. i tried returning it to stock from hasoons toolkit but to no evail... when i go to reboot and twrp and try to reboot the system it tells me i have no os installed and asks if i want to continue so i went ahead and rebooted anyway even though it said no os installed, it then came up with a message saying i am not rooted anymore and do i want to install supersu...i am very confused
brenntard said:
i have the AT&T version with hasoons att htc one x all in one toolkit downloaded. i tried returning it to stock from hasoons toolkit but to no evail... when i go to reboot and twrp and try to reboot the system it tells me i have no os installed and asks if i want to continue so i went ahead and rebooted anyway even though it said no os installed, it then came up with a message saying i am not rooted anymore and do i want to install supersu...i am very confused
Click to expand...
Click to collapse
did you try and install supersu just for the hell of it?? You may want to install stock recovery, then re-lock bootloader, and then use RUU. This almost always get your device back to stock.:good:
TheJokah said:
did you try and install supersu just for the hell of it?? You may want to install stock recovery, then re-lock bootloader, and then use RUU. This almost always get your device back to stock.:good:
Click to expand...
Click to collapse
Yes i tried to install it just to see what would happen...my hpone rebooted and got stuck at the HTC quietly brilliant screen. so i should relock the phone and run the RUU? even if i dont have an os installed this will bring me back to stock? meaning i can use my phone again?
brenntard said:
Yes i tried to install it just to see what would happen...my hpone rebooted and got stuck at the HTC quietly brilliant screen. so i should relock the phone and run the RUU? even if i dont have an os installed this will bring me back to stock? meaning i can use my phone again?
Click to expand...
Click to collapse
yes it will put one there for you then you can unlock, install twrp or CM, and then custom rom. Profit! :highfive:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
copying to TWRP
parkerdjohnson said:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
Click to expand...
Click to collapse
I can send you a link in pm to send your costom or stock rom to TWRP but it may still not work to install. ask how I know about that? Coz I totally have the same problem and cant get rid of it for days. my hboot is 1.32 and I have the all in one toolkit.
İF anyone can help me about finding the right RUU for my htc one x+ (cid: cws-001) and how to go back to stock recovery I would be greatful.
Thankss
parkerdjohnson said:
See, my issue is that I cant go back to a stock rom because my hboot 1.40....
Click to expand...
Click to collapse
Im also on HBOOT 1.4 I believe you need this RUU.
I am going to revert to stock to make sure you can use this. Please just make sure what cid # you have. It should be CWS_001 for ATT Branded.(like mine )
edit: RUU ran fine with HBOOT 1.40
---------- Post added at 05:25 PM ---------- Previous post was at 05:20 PM ----------
[/COLOR]
sahtaan_yusuf said:
I can send you a link in pm to send your costom or stock rom to TWRP but it may still not work to install. ask how I know about that? Coz I totally have the same problem and cant get rid of it for days. my hboot is 1.32 and I have the all in one toolkit.
İF anyone can help me about finding the right RUU for my htc one x+ (cid: cws-001) and how to go back to stock recovery I would be greatful.
Thankss
Click to expand...
Click to collapse
You need to have this stock recovery installed. then relock bootloader, and then run this RUU
this should fix it. if that RUU does not work, try the link to the RUU I gave for parkerdjohnson
Thanks
thanks so much for the links my brother, I am downloading the RUU links but the stock recovery link doesnt work. do you have another one? or I have the all in one tool kit, do I have the chance to go back to stock recovery by using this toolkit?
sahtaan_yusuf said:
thanks so much for the links my brother, I am downloading the RUU links but the stock recovery link doesnt work. do you have another one? or I have the all in one tool kit, do I have the chance to go back to stock recovery by using this toolkit?
Click to expand...
Click to collapse
i attached a .zip file with the recovery inside. THIS IS NOT FLASHABLE! You need to flash from fastboot or with an All in one.
edit:
I uploaded the wrong file :banghead: I will try to find the right one. Sorry
Edit 2:
found the file and uploaded.
Related
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
What happens when you try to run ruu
Sent from my EVO using xda app-developers app
PathogenVirdae said:
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
Click to expand...
Click to collapse
Update your twrp to 2.3.3.0 or if you want to return to stock you have to relock your bootloader
Sent from my PoS MoPho
TWRP won't take the update for whatever reason, and I can't get fastboot to work over this machine, so I'm thinking about running linux to get into the phone a little easier (hopefully.) I either have to wait til I can use my roommates machine, or start installing a dual boot
Have you tried goomanager to update twrp?
Yea, it downloads the file, gives a message stating it has been installed, then it does nothing. No reboot. when I manually reboot into recovery, it still sits at previous version.
Do you have adb setup on your PC? Also do you have the correct drivers installed ?
#Root-Hack_Mod*Always=SG3
Ok, so finally got my fastboot to work
"Fastboot oem lock"
Worked. Awesome...now it's stuck in a bootloader loop. Won't let me into recovery, but I can still get to fastboot. I can't get to recovery, factory reset, etc. just hboot and fastboot.
screen shows tampered relocked and security warning.
Any ideas? I can get it to flash the PJ75IMG.zip but it says main version is older! or something to that effect and it fails. Any ideas?
UPDATE: Got it unlocked again and it booted back into OS.
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
PathogenVirdae said:
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
Click to expand...
Click to collapse
Did you fastboot flash the stock recovery after you relocked?
bigdaddy619 said:
Did you fastboot flash the stock recovery after you relocked?
Click to expand...
Click to collapse
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
PathogenVirdae said:
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Click to expand...
Click to collapse
Well since you are s-on you can't flash PJ75IMG files from bootloader if you want to update your phone to the latest OTA you have to relock your bootloader and reflash the stock recovery and take the OTA then unlock and flash twrp again.
If you click the link in my sig and download the 3.15/2.09 hboot file there is a stock recovery in the files as well as instructions on how to flash it
Sent from my PoS MoPho
---------- Post added at 09:19 AM ---------- Previous post was at 09:15 AM ----------
mrlakadaddy said:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Or this ^^^^ a much better choice
Sent from my PoS MoPho
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
PathogenVirdae said:
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
Click to expand...
Click to collapse
There is a stock recovery on the files I recommend as well as the commands to use
Sent from my PoS MoPho
So I'm trying to run the Dirty Racun method, and I'm sitting at this part "sudo ./fastboot flash zip RUU.zip"
How long should this normally take? The only thing I can see is Sending 'zip' (filesize) and htc on the phone. Does this process take awhile? >20 mins? Is there some kind of progress meter?
Update:// So apparently I'm stuck. DirtyRacun seems to hang on the RUU flash. BigDaddy, it also stops half way thru the stock recovery flash.
Hey guys i gota semi bricked EVO LTE on the 3.16 SW i was wondering if anyone can help me fix. I tried to root it and thats what caused this issue. I did the bootloader unlocked, loaded TWRP recovery, then installed SU, then it wouldn't turn on, would only flash to sprint screen.
I have tried to to a full wipe / factory - didn't work
i have tried to load the 3.15 RUU - does not work (it just shows loading the rom forever)
i have tried to load it through fastboot via Ulimited.IO (it just freezes during the loading of the SW)
what else can i try? I seems like everytime the phone tries to take a ROM it will just not respond.
thanks
OK your on the latest firmware I think 3.16 and if your s-on that means you have the new touch panel driver which limits what ROMs will work on your device.
You need to download a ROM with a s-on installer included or pull the boot IMG from the ROM and flash via fast boot because you can't flash kernels easily when your S-ON .You also will need a rom that's compatible with the latest fw. AFAIK most of the sense ROMs will be good to go, I really don't know which ones cause I'm s-off and don't have the tp driver problem.
If you need more info there's s thread stickied in Q&A called "don't panic" that will answer most of questions
Once your up and running you should go about getting S-Off.
SENT FROM MY LTEVO
corcgaigh said:
OK your on the latest firmware I think 3.16 and if your s-on that means you have the new touch panel driver which limits what ROMs will work on your device.
You need to download a ROM with a s-on installer included or pull the boot IMG from the ROM and flash via fast boot because you can't flash kernels easily when your S-ON .You also will need a rom that's compatible with the latest fw. AFAIK most of the sense ROMs will be good to go, I really don't know which ones cause I'm s-off and don't have the tp driver problem.
If you need more info there's s thread stickied in Q&A called "don't panic" that will answer most of questions
Once your up and running you should go about getting S-Off.
SENT FROM MY LTEVO
Click to expand...
Click to collapse
thanks for the info. So i need to get a rom with s-on installer and flash it via fastboot flash zip xxxxxx.zip? But i'm not even sure if i'm rooted. I did install the SU in there, it said okay, but now i cant access the recovery. only fastboot. would this damage the phone in anyways?
thanks
right now its showing
**tampered***
** relocked **
** security warning**
Jewel PVT SHIP S-ON RL
HBOOT - 2.09
RADIO - 1.12.11.1210
OpenDSP - V31.1.0.45.0815
emmc- Boot
oct 18 2012
I just tried to flash MeanBean v309 on it via fastboot and it didn't work? is it because the file is too big? I am pretty sure the bean mean is a S-on ROM
Looks like u need to unlock again. Use the same command as the last time
"Fast boot OEM unlock" or whatever it is. Flash twrp recovery thru fast boot. Once you have twrp installed flash a rooted ROM to gain root.
SENT FROM MY LTEVO
corcgaigh said:
Looks like u need to unlock again. Use the same command as the last time
"Fast boot OEM unlock" or whatever it is. Flash twrp recovery thru fast boot. Once you have twrp installed flash a rooted ROM to gain root.
SENT FROM MY LTEVO
Click to expand...
Click to collapse
took your advice, re-unlocked it and installed TWRP recovery on it, and now i get recovery, but i cant use it because the touch screen does not work so i'm in the process of trying to find a CMW recovery instead and try to install a newer rom.
truwrxtacy said:
took your advice, re-unlocked it and installed TWRP recovery on it, and now i get recovery, but i cant use it because the touch screen does not work so i'm in the process of trying to find a CMW recovery instead and try to install a newer rom.
Click to expand...
Click to collapse
Do not use CMW. It was abandoned a long time ago for our phones. Something about it screwing up partitions. Install a new version of TWRP. 2.4 or higher. And Venom rom has an s-on installer for sure. Other roms might have one but I'm not sure which ones. Stay away from CMW.
The s-on installer is just an installer added to the ROM zip so that you don't have to flash the boot.img seperately. Just get a working version of TWRP and flash Venom (or other s-on friendly rom). That should work.
tilltheend714 said:
Do not use CMW. It was abandoned a long time ago for our phones. Something about it screwing up partitions. Install a new version of TWRP. 2.4 or higher. And Venom rom has an s-on installer for sure. Other roms might have one but I'm not sure which ones. Stay away from CMW.
Click to expand...
Click to collapse
ahh okay thanks, i'll give it a shot and report back.
truwrxtacy said:
ahh okay thanks, i'll give it a shot and report back.
Click to expand...
Click to collapse
thanks guys so i got it working! i appreciate everyones help! I ended up loading a new TWRP recovery, and loading the new Meanbean and it works now.
I have one last question, does this mean i can only install roms compatible with 3.16 now? The only reason i went through all of this was because i wanted ICS on it. The new JB diag drivers dont work, and the only way i can make the diag drivers work is to downgrade to ICS. If i try to downgrade will i mess it up again?
thanks
truwrxtacy said:
thanks guys so i got it working! i appreciate everyones help! I ended up loading a new TWRP recovery, and loading the new Meanbean and it works now.
I have one last question, does this mean i can only install roms compatible with 3.16 now? The only reason i went through all of this was because i wanted ICS on it. The new JB diag drivers dont work, and the only way i can make the diag drivers work is to downgrade to ICS. If i try to downgrade will i mess it up again?
thanks
Click to expand...
Click to collapse
Yes, you are stuck on 3.16 roms. Anything below and your touchscreen won't work. I highly recommend going for s-off. Makes everything so much easier. The only other option is to use babyracun from unlimited.io then ruu to 3.15. But if you're doing that you might as well go for s-off.
tilltheend714 said:
Yes, you are stuck on 3.16 roms. Anything below and your touchscreen won't work. I highly recommend going for s-off. Makes everything so much easier. The only other option is to use babyracun from unlimited.io then ruu to 3.15. But if you're doing that you might as well go for s-off.
Click to expand...
Click to collapse
Agreed. I did babyracun and then Facepalm afterwards. Worked great on Windows 7 64bit of which isn't supported by the developers, of course
Delakit said:
Agreed. I did babyracun and then Facepalm afterwards. Worked great on Windows 7 64bit of which isn't supported by the developers, of course
Click to expand...
Click to collapse
Which is what this guy should do since he doesn't have ubuntu and probably doesn't want to use a live disc.
thanks alot guys, i was not aware of the babyracoon. I'll give that a shot.
thanks
i have a question about baby racoon, as it does not have a separate thing for it.
So do i download baby racoon and run all the adb commands, and then run face palm, then ruu?
or do i download baby racoon and run all the adb commands, and ruu then face palm?
sorry i'm a noob
truwrxtacy said:
thanks alot guys, i was not aware of the babyracoon. I'll give that a shot.
thanks
i have a question about baby racoon, as it does not have a separate thing for it.
So do i download baby racoon and run all the adb commands, and then run face palm, then ruu?
or do i download baby racoon and run all the adb commands, and ruu then face palm?
sorry i'm a noob
Click to expand...
Click to collapse
Do steps 6-9 on unlimited io. That will leave your phone at stock 3.15. Then go and find out what facepalm requires and continue with that.
Hi,
I have a Sprint CDMA HTC EVO 3D. I tried root and get S-OFF for it. Unfortunately I failed and now the phone fail to boot.
Below is what I did from which you might be able to diagnose it and give me suggestions.
(1) The original status of mu phone is:
Stock rom, I never root it before.
HBOOT-1.58.0000
Android Version: 4.03
HTC Sense version: 3.6
Software version: 2.95.651.6.710RD
(2) My root procedures:
I followed this post: http://forum.xda-developers.com/showthread.php?t=1813818
I successfully unlocked phone with HTCDev, successfully Flashed 4EXT recovery, and successfully installed Superuser-3.1.3-arm-signed.zip. I also booted into sytem, everything worked well.
However I failed in next step of JuopunutBear's Wire Trick (S-OFF). When I ran ControlBear.exe, it finally hanged there.
Current status of my phone:
Unfortunately I did not make a backup to my original ROM, so there is no way to revert back by restoring backup.
Now the phone is in unlocked status, I was able to boot to HBOOT and also enter 4Ext recovery, however I am not able to boot into Android. If I try to boot into Android, it always hang at black screen.
I am able to boot to fastboot (USB) mode, I tried to flash some stock ROM (listed at http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209), but I failed. For example, I ran a RUU of 2.89.exe, it detected my phone version is 2.95, and further update RUU failed.
Looks like my partition is ruined, but I might be wrong.
ANyone can help me to restore my phone to working status? At least I need the phone to be able to boo to Android.
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
lsdyna said:
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
Click to expand...
Click to collapse
EDIT:
Okay. I've got some questions.
1. You're stuck on some black screen as you said. It boots past the white HTC splash and then it's stuck on that black screen, right. Do you mean the juopunutbear "arrow screen" - juopunutbears boot.img?
2. I think if you had flashed the original boot img everything would have been fine.
3. The easiest way is to flash to stock, so lets try to figure out why it doesn't flash.
MrJyrks said:
Okay. So from what I understood, you are stuck on the black juopunutbear screen, right?
Click to expand...
Click to collapse
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
lsdyna said:
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
Click to expand...
Click to collapse
And you can boot to recovery, right?
EDIT:
One more thing. Which ruu were you trying to run
Edit2:
What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Edit3:
BTW, this was on the wire trick page... http://unlimited.io/jbtroubleshooting.htm - TROUBLESHOOTING There was everything you needed to know when you failed at something. Remember that page. You may need it the next time you try to do the wiretrick.
Q: Were you using a linux distro for the wire trick and did you use the appropriate files for wire trick since GB and ICS have separate tools?
If you want I may assist you in gaining s-off if we get this thing functional again.
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
MrJyrks said:
And you can boot to recovery, right?
EDIT: One more thing. Which ruu were you trying to run
Edit2: What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Click to expand...
Click to collapse
lsdyna said:
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
Click to expand...
Click to collapse
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Edit: This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Now I only want to revert my phone to stock, not considering root at present time.
I searched 2.95 ROM, unfortunately the highest version that I can find is 2.89. Does this mean I have no way to revert my phone to live? Thanks a lot.
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
lsdyna said:
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
Click to expand...
Click to collapse
If you have access to the recovery, most likely, yes.
Hello MrJyrks,
Thank you so much for the link! I am eager to try that. Before I do that I think I shall ask two questions to avoid further mess up the device:
Question #1: To install the deodexed rom, which is the correct way:
(1) Rename the ZIP file to PG86IMG.ZIP, put to root of sdcard, then boot, letting the Bootloader to do the update.
(2) In 4EXT recovery, enable smartflash, enable script asserts, then install the zip from the root of sdcard.
Question #2: You said I shall flash boot image, can you tell me how to do this? I mean, where shall I get the boot image file? Flash it with 4EXT? SHall I do it before or after install ROM zip file?
Thank you very much for your helps!!!
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I tried install the stock ROM from your link (using 4EXT with smartflash enabled and script asserts enabled.) . Amazing that installation completed successfully (indeed this is the first ROM zip that I was able to install successfully since I mess up the device). When I exit After that, it did some further update which I guess is the boot.img that you mentioned.
4EXT it said 'a pending update for your boot partition is detected' and I think it was doing the boot image flash that you mentioned, right?
Unfortunately when I boo the device, I still got black screen.
Now I am unlocked and also rooted (since I successfully installed superuser in 4EXT). DO you think I shall lock the devioce before installing the stock ROM? If so, one possible issue is that if I relock the device, I found 4EXT is not available. In that case, how shall I install the ROM zip file?
Thanks.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
Further update:
I flashed boot image by: fastboot flash boot boot.img which is included in the stock ROM zip file.
The flash went successfully. However, I am still not able to boot to Android. WHat I have is the device hang there, alternatively displaying logo with white background, and black screen.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
lsdyna said:
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
Click to expand...
Click to collapse
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
MrJyrks, thank you so much!!!
MrJyrks said:
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
Click to expand...
Click to collapse
Similar problem, can't return to stock
I have a problem similar to lsdyna's, and am hoping that even though this post is old, MrJyrks or someone might be able to help me.
I am unsuccessfully trying to return my phone to stock. First a bit of history.
I had 2.95.651.6.710RD s-on hboot 1.58 Android Version: 4.03 HTC Sense version: 3.6 on my phone, and wanted root. I didn't need s-off, just wanted to root so could do some tweaking (stop some apps from autostarting, stop some form getting network access, etc.) so loaded 4EXT Recovery Touch, and got root (fastboot oem get_identifier_token method), got superuser in there, and happily began tweaking. Famous last words... I didn't make a backup right away (learned my lesson!) and suddenly found a 'overtweaked' sluggish phone on my hands.
Thought best thing would be to lose the root & return to stock & start over, carefully, making backups.
So I used Fastboot (fastboot oem lock) to lock it (worked) and proceeded to try to load RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe into it [via my computer], but didn't realize until reading MrJyrks post that a lower RUU couldn't be used.
I now am relocked (phone does boot up, but can tell the system tweaks are still slogging it), lost the recovery, and wondering what to do... do I try putting recovery back in & using the Negalite 2.95 stock deodex ROM MrJyrks mentioned? If so, how do I use that zip file method verses the exe one I tried thru my computer?
Thanks for the help
You had issues with the RUU because your main version is higher than that contained in the RUU.
Unlock, flash recovery again. Boot into recovery and flash this zip: https://copy.com/wlVvwssXXNN00Pe
That will lower your main version. Relock the bootloader, put the phone into fastboot USB mode, then run the RUU while in fastboot USB mode.
Should be back to stock after that.
I had already had my phone's bootloader unlocked and rooted and had a GPe ROM installed and worked perfectly. THEN I saw that you could literally make it a Google Play edition phone complete with OTA and worked on trying to achieve that. Getting my phone S-Off wasn't working because I believe of my HBOOT version (1.55) so I was told to download this stock ROM that would downgrade me to reach a version that I could then run revone to achieve S-OFF.
POST: http://forum.xda-developers.com/showpost.php?p=45487258&postcount=55
I ran a backup through TWRP first and then flahsed this ROM, which has kept my HTC One at the HTC One splash screen. I connected it to my computer/ADB and got it into the bootloader to go into custome recovery BUT the recovery takes me to a black screen with a phone and red triangle, so it's like my recovery isn't there anymore. Fine.
I download the latest TWRP for my phone(triple checked) and ran the fastboot flash recovery command through ADB but it says
"(bootloader) signature checking...FAILED (remote: signature verify fail)"
is there some sort of way to disable the signature check using ADB or am I actually going about this the wrong way?
I'll admit, I don't do this stuff oftem, so ask as many questions as needed as I probably left out details you may need
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
noobsquared said:
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
Click to expand...
Click to collapse
Not to sound n00b-ish, but what would be the best way of doing this?
EDIT: Actually it is relocked already! Duh! On the bootloader screen it says "TAMPERED" and then "RELOCKED" below that
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I actually had that downloaded but I was just concerned if that was the right move since it wipes the phone.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
h_smith said:
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
Click to expand...
Click to collapse
Here you go:
http://www.androidruu.com/getdownlo...13_10.38j.1157.04_release_334235_signed_2.exe
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
noobsquared said:
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
Click to expand...
Click to collapse
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
h_smith said:
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
Click to expand...
Click to collapse
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
noobsquared said:
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
Click to expand...
Click to collapse
Thank you. I'm downloading the .exe and will post the results. But it looks like that might take a few hours :/
hey is there another link? that one is so slow and keeps timing out :/
You can either use download manager or chrome browser is pretty good at managing that.
Try this: http://d-h.st/VWf
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
I just did a google search for the term RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_R and gave you the second result I got. Just search for the name of the file and you will find plenty of links.
Hope that helps.
This sounds like the exact same problem I had. The RUU and directions solved that one for me too...
Link to RUU: http://www.htc.com/us/support/news.aspx?p_id=628&p_name=htc-one-att
Other thread: http://forum.xda-developers.com/showthread.php?t=2492266
THANK YOU NOOB!!
I managed to get it fixed. Turns out HTC hosted that exact file so I downloaded it and it fixed my phone. Good times..
Hi People,
I have to admit life with my finger print scanner has been great
But I want to put my HTC One max completely back to stock. Rom, Kernal, recovery, the lot.
Just one problem i can not find the original RUU for the phone. I must have deleted it or something :crying:
The details of my device are attached.
As far as i am aware i am still using the original ROM that came with phone.
All i have done was unlocked the bootloader, flashed a custom recovery (CWM) and then managed to lock my boot loader using firewater.
I am now S-off but like i said i want it back to stock completely.
Can someone please help me out again by letting me know how to do a back to stock and where i can find a stock RUU
Thanks again
Is this the Ruu your looking for
http://forum.xda-developers.com/showthread.php?t=2643973
Sent from my HTC6600LVW using XDA Premium 4 mobile app
thayl0 said:
Is this the Ruu your looking for
http://forum.xda-developers.com/showthread.php?t=2643973
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@thay10
thanks for getting back to me.
I'm not sure if this ruu is ok for me to use as its a 708. and the one i have is a 401
I do not believe there is an ruu for 1.54.401.1,just the custom rom that was posted
htct6 said:
Hi People,
I have to admit life with my finger print scanner has been great
But I want to put my HTC One max completely back to stock. Rom, Kernal, recovery, the lot.
Just one problem i can not find the original RUU for the phone. I must have deleted it or something :crying:
The details of my device are attached.
As far as i am aware i am still using the original ROM that came with phone.
All i have done was unlocked the bootloader, flashed a custom recovery (CWM) and then managed to lock my boot loader using firewater.
I am now S-off but like i said i want it back to stock completely.
Can someone please help me out again by letting me know how to do a back to stock and where i can find a stock RUU
Thanks again
Click to expand...
Click to collapse
Wonders_Never_Cease said:
I do not believe there is an ruu for 1.54.401.1,just the custom rom that was posted
Click to expand...
Click to collapse
Hey,
thanks for that.
I cant believe that the original RUU does not exist.
Oh well that's me screwed then :silly:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey farazhassankhan,
Thanks for the info. I have done everything apart from the factory reset from the stock recovery. I've flashed the stock recovery on the phone. But I have no idea how to do this, as all that shows up while I'm in the stock recovery is a picture of a phone with a red triangle with an exclamation mark though it. Is there a way to access a menu or something?
htct6 said:
Hey farazhassankhan,
Thanks for the info. I have done everything apart from the factory reset from the stock recovery. I've flashed the stock recovery on the phone. But I have no idea how to do this, as all that shows up while I'm in the stock recovery is a picture of a phone with a red triangle with an exclamation mark though it. Is there a way to access a menu or something?
Click to expand...
Click to collapse
Yes, there is a way. Click on "Recovery" in bootloader and wait untill it passes htc screen. Then press "volume up" and power button couple of times and then keep pressing Volume up.
There will be a message:
mount SD Card failed 1
mount SD Card failed 2
mount SD Card failed 3
mount SD Card failed 4
mount SD Card failed 5
and there must be a Stock Recovery menu (in blue) on your screen and there you can factory rest your One Max.
Please bear in mind that factory reset will wipe all your date (inculding media file such as pictures/songs/downloads etc) from phone and you'll have to set up your pbone again
You should be able to receive 4.4 OTA (if available for your region yet)
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
Yes, there is a way. Click on "Recovery" in bootloader and wait untill it passes htc screen. Then press "volume up" and power button couple of times and then keep pressing Volume up.
There will be a message:
mount SD Card failed 1
mount SD Card failed 2
mount SD Card failed 3
mount SD Card failed 4
mount SD Card failed 5
and there must be a Stock Recovery menu (in blue) on your screen and there you can factory rest your One Max.
Please bear in mind that factory reset will wipe all your date (inculding media file such as pictures/songs/downloads etc) from phone and you'll have to set up your pbone again
You should be able to receive 4.4 OTA (if available for your region yet)
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@japodude & @farazhassankhan
Just want to say a massive thanks to you both @japodude for uploading your stock nandroid back up and @farazhassankhan for helping me get back to complete stock.
Massive :good: thank you
your very welcome. glad i could help someone.
No Problem bro. XDA Community is all about helping each others. Cheers.
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
You can restore a CWM backup of 1.54.401.1 and then flash a stock 1.54.401.1 recovery in fastboot and then factory reset your phone in Stock Recovery. This will take your phone back to stock state and you'll be able to receive OTA for 4.4 also.
All you need a stock nandroid backup of 1.54.401.1 and stock recovery.
Click to expand...
Click to collapse
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Spar1900 said:
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Click to expand...
Click to collapse
Oh mate i feel for you i know that feeling very well.
I used Firewater to s-off.
I then flashed a stock nandroid backup kindly provided in this thread. Then flashed stock recovery.
Chances are its the unsecure kernal causing this boot loop. I'm not an expert though. there is a 708 stock rom on somewhere on these forums
so you could try flashing that to the phone.
I'm sure you will get it sorted with the help of the kind people on here.
Spar1900 said:
I want go back stock rom, i got installed Unsecure Kernel and SuperSU but my phone just stay on BOOT logo.
I can't do S-OFF cuz said "ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit"
I just want go back to stock and use my phone :crying:
Details:
-Htc one max international version.
-OS-2.61.708.1
-Radio-4T.24.3218.09
-T6UL PVT SHIP S-ON RH
I am new on this, please if u can. HELP ME!
Click to expand...
Click to collapse
try flashing the boot.imgvfrom the nandroid backup i shared.
or is it because you did have kitkat as your bootloader shows os 2.61.708.1. is the stock 1.54.401 conflicting with what hboot says stopping it?
install twrp recovery and install virtuous one max 2.0.2. least your phone will come back on hopefully.
japodude said:
try flashing the boot.imgvfrom the nandroid backup i shared.
or is it because you did have kitkat as your bootloader shows os 2.61.708.1. is the stock 1.54.401 conflicting with what hboot says stopping it?
install twrp recovery and install virtuous one max 2.0.2. least your phone will come back on hopefully.
Click to expand...
Click to collapse
I can install Virtuos with no S-OFF? I am S-ON i i cant S-OFF i dont know why.
--------EDIT--------
Dude, i flash this boot.img "dont let me upload the link haha" (i can send u too PM) and work perfect, now i do S-OFF with Firewater and works too.
Boot loop, atm solved. Now i will go recover Fingerprint Scanner.
Thanks for all @japodude, i will comment in a few minutes, and i will upload my backups!
Spar1900 said:
I can install Virtuos with no S-OFF? I am S-ON i i cant S-OFF i dont know why.
--------EDIT--------
- I am downloading Virtuos.
- My HBOOT version is 2.49
- I tried install your boot.img but same boot loop.
Click to expand...
Click to collapse
my Hboot is 2.47.0000.
i think thats you problem, the hboot is too new for the stock 1.54.401. i used firewater on hboot 2.47 to gain s-off. dont know if firewater works on hboot 2.49
unless you get s-off, i don't think you can downgrade the hboot. fingers crossed the virtuous rom should work for you my friend. as virtuous is based on the ota, in theory it should be fine with your hboot.
your best bet might be to get the boot.img from the ota for your region.
japodude said:
my Hboot is 2.47.0000.
i think thats you problem, the hboot is too new for the stock 1.54.401. i used firewater on hboot 2.47 to gain s-off. dont know if firewater works on hboot 2.49
unless you get s-off, i don't think you can downgrade the hboot. fingers crossed the virtuous rom should work for you my friend. as virtuous is based on the ota, in theory it should be fine with your hboot.
your best bet might be to get the boot.img from the ota for your region.
Click to expand...
Click to collapse
SOLVED, i am so happy now and i can say that I love u hahahahaha! I flash the Boot.img from Virtous and work fine. Thanks for all dude.
In a few minutes i will upload my backups!
Spar1900 said:
SOLVED, i am so happy now and i can say that I love u hahahahaha! I flash the Boot.img from Virtous and work fine. Thanks for all dude.
In a few minutes i will upload my backups!
Click to expand...
Click to collapse
glad you got it working. be interesting to see if firewater works with your hboot. ps, i used firewater on stock kernel just rooted
japodude said:
glad you got it working. be interesting to see if firewater works with your hboot. ps, i used firewater on stock kernel just rooted
Click to expand...
Click to collapse
S-OFF work perfectly on my HBOOT 2.49 using Firewater.
Spar1900 said:
S-OFF work perfectly on my HBOOT 2.49 using Firewater.
Click to expand...
Click to collapse
sweet! now you can do whatever you want :good: