Well my chd is within warranty and I wanna give it to them so that they fix my camera flash problem. Since I have flashed stock 4.2 ROM is it OK to flash stock 4.1 using sp flash tools?? Is there a binary/flash counter on Chd which counts the no. of times I have flashed a ROM? Do I have to use triangle away? Will they get to know the ROM flashes and reject? Please do answer. Thank you in advance
Sent from my Micromax A116 using xda app-developers app
crvineeth99 said:
Well my chd is within warranty and I wanna give it to them so that they fix my camera flash problem. Since I have flashed stock 4.2 ROM is it OK to flash stock 4.1 using sp flash tools?? Is there a binary/flash counter on Chd which counts the no. of times I have flashed a ROM? Do I have to use triangle away? Will they get to know the ROM flashes and reject? Please do answer. Thank you in advance
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
As far as I know, SVC guys are not so smart enough to doubt if you re-flash the stock ROM using SP Flash tools.
Also, I had used the stock recovery once after reflashing stock ROM and there was no alert triangle icon. So, no need to worry about that.
Just clean your SD card and Internal SD card after reflashing stock ROM to be sure, so that any additional folders created using any Root app or custom recovery (specially such as Titanium Backup, Clockword, TWRP) are not present.
Thank you for your reply. So there will be no problem in flashing stock 4.1 after firmware upgrade to 4.2. OK will try to trick those guys
Sent from my Micromax A116 using xda app-developers app
crvineeth99 said:
Thank you for your reply. So there will be no problem in flashing stock 4.1 after firmware upgrade to 4.2. OK will try to trick those guys
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
Remeber, you might get TPUpgrade again when you downgrade to 4.1.2 with SP Flash Tools
Related
Hey guys...
The problem is that when a new SMS is recived (or even a new Bluetooth file), it doesn't make any sound!!! I checked all the sound setting related to the issue but no good result...
Mine is not rooted... No Rom... Using the factory one...
well I hav never experienced this issue before what I suggest is flash the newest jb ota leak through odin or root the phone and flash a custom rom
Sent from my GT-I9300 using xda premium
Edward Zhuang said:
well I hav never experienced this issue before what I suggest is flash the newest jb ota leak through odin or root the phone and flash a custom rom
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thanks pal... I think it was because of one of my installed pros... 'cause as soon as the factory reset everything goes fine... :good::laugh:
help...
Mobile odin?
Sent from my GT-I9100 using xda premium
ibenic said:
help...
Click to expand...
Click to collapse
You also can't install Stock ROMs with stock recovery, neither with CWM...
You'll need Odin.
Mobile ODIN is the only choice...
Also were you referring to stock ICS or Custom ROMs???
If its custom ROMs then you can directly flash using CWM...
But If stock one then you need Odin....else use kies to update..
Press thanx if i Helped..:good:
Can i flash stock recovery with mobile odin
you can't flash a stock recovery. it comes with a stock rom, and mobile Odin is made exactly for flashing stock roms
Glebun said:
you can't flash a stock recovery. it comes with a stock rom, and mobile Odin is made exactly for flashing stock roms
Click to expand...
Click to collapse
So i can go to stock rom with mobile odin?
And bydeway i already flashed stock recovery with mobile odin and in works...
I was pretty sure there isn't a stock recovery separately from the rom.
of course you can flash a rom with mobile Odin, that's what it's for
Glebun said:
I was pretty sure there isn't a stock recovery separately from the rom.
of course you can flash a rom with mobile Odin, that's what it's for
Click to expand...
Click to collapse
You where wrong about the stock recovery flash it is possible...
But can i flash stock samsung rom with mobile odin and will it then make everything stock(recovery)(rom)and modified status too...
you are asking the same question for the third time, read my replies.
you will need to use Triangle Away, unroot, then factory reset for everything to be stock
Glebun said:
you are asking the same question for the third time, read my replies.
you will need to use Triangle Away, unroot, then factory reset for everything to be stock
Click to expand...
Click to collapse
i have rooted my stock XEMB1 firmware and used triangle away. so if ii unroot and factory reset my status will go from modified to official?
it should
CF Autoroot
k6? said:
i have rooted my stock XEMB1 firmware and used triangle away. so if ii unroot and factory reset my status will go from modified to official?
Click to expand...
Click to collapse
heres my suggestion
once you already went back to stock rom, then your traiangle away but still want your phone rooted. what you can do is to search here in XDA the CFAutoroot for our S3 and your system status still be NORMAL. works for me
I used cf auto root and have always had stock rom. I still have modified status.
Sent from my GT-I9300 using xda app-developers app
Do I need to run traingle away again and do a factory reset in recovery?
Sent from my GT-I9300 using xda app-developers app
to do what? flash a stock recovery? no.
To get rid of status modified.
Sent from my GT-I9300 using xda app-developers app
k6? said:
To get rid of status modified.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Flash stock recovery and stock rom unroot and factory reset
stupidly will be met by sarcasm
Thank. I have stock rom and recovery so now if I unroot with super su run factory reset im good to go?
I dont have to yet. I just want to make sure I know what to do if the time comes.
Sent from my GT-I9300 using xda app-developers app
Just to let you guys know. Curiosity got the better of me. I flashed a stock rom followed by a factory reset and I'm now out of the box stock.
Thanks everyone. I think im getting the hang of this. :beer:
Sent from my GT-I9300 using xda app-developers app
No Service,After flashing Paranoid Rom.
I checked Baseband version.It shows Unknown.
So i flashed two 4.1.2 Baseband.But both did not work.
Then i flashed leaked JB 4.2.1 version ROM,Now All Service and Data Service working.
After that i rooted the stock rom and again i tried to flash PA rom.
This is also happening for CM rom.
But for other custom stock rom or temasek's UNOFFICIAL cm,it is working well.
Why?
Any solution?
I tried the same rom on another Galaxy S3.
Service was working well.
Mine and another s3 have same Baseband.
I did same steps to install for both headset.
Did you wipe your phone before installing the new rom?
Sent from my GT-I9300 using xda app-developers app
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
svprm said:
Wiped!
But no luck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
_MirageX_ said:
same problem, reflashed stock from odin and bootlop
panicked then flashed slim bean 7 all fine. Trying reflash
Click to expand...
Click to collapse
I flashed stock rom.i tried to flash but no luck.
I think I need to completely reset my device.
For that do I need pit file?
Sent from my GT-I9300 using xda app-developers app
If you mess with Pit you are likely to have a brick .
Flash stock rom via Odin .
jje
don't mess with PIT, just reflash another working CM rom (like slim) and it should be fine. THen if you want re flash stock, but you should be fine anyway.
I'm using xperia u. and its in GB build version is 6.0.B.1.564
I want to flash custom ROM. so there might be a chance to break my phone. to avoid this I want to know how to flash an official stock ROM in offline via flashtools. can anyone help me?
Sent from my ST15i using xda app-developers app
But if you are on 6.0.B.1.564, you are on a stock ROM?
Which Custom ROM would you like to flash?
lol98lol98 said:
But if you are on 6.0.B.1.564, you are on a stock ROM?
Which Custom ROM would you like to flash?
Click to expand...
Click to collapse
or right. I'm on stock ROM. and now I want to flash cm10.1 based ROM. what should I do for that? and what should I need to do if I break my phone?
Sent from my ST15i using xda app-developers app
rabin69x said:
or right. I'm on stock ROM. and now I want to flash cm10.1 based ROM. what should I do for that? and what should I need to do if I break my phone?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
1)To install cm10.1 you have to unlock your bootloader. This procedure will void your warranty.
2)You can still relock your bootloader flashing this one: http://forum.xda-developers.com/showthread.php?t=1920199 . Notice that if you lock your bootloader when you are on custom rom that requires unlocked bootloader (cm9.1 cm10 cm10.1) you will have some serious problems.
3) To unlock your bootloader follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
4) After that to install cm10.1, you have follow the steps here : http://forum.xda-developers.com/showthread.php?t=2337493 . On the first post you will see installation. Follow these steps and everything will go fine.
DaRk-L0rD said:
1)To install cm10.1 you have to unlock your bootloader. This procedure will void your warranty.
2)You can still relock your bootloader flashing this one: http://forum.xda-developers.com/showthread.php?t=1920199 . Notice that if you lock your bootloader when you are on custom rom that requires unlocked bootloader (cm9.1 cm10 cm10.1) you will have some serious problems.
3) To unlock your bootloader follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
4) After that to install cm10.1, you have follow the steps here : http://forum.xda-developers.com/showthread.php?t=2337493 . On the first post you will see installation. Follow these steps and everything will go fine.
Click to expand...
Click to collapse
thanks!
but I still need a back up plan.
so how can I get back to my stock ROM which should work 100%?
Sent from my ST15i using xda app-developers app
rabin69x said:
thanks!
but I still need a back up plan.
so how can I get back to my stock ROM which should work 100%?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
Root your phone and use titanium backup.
DaRk-L0rD said:
Root your phone and use titanium backup.
Click to expand...
Click to collapse
titanium backup!!!
I don't think it works all time. coz I have so much experience with cwm backup.
and u did not mentioned about stock karnel and cm10.1 based kernel .
Sent from my ST15i using xda app-developers app
rabin69x said:
titanium backup!!!
I don't think it works all time. coz I have so much experience with cwm backup.
and u did not mentioned about stock karnel and cm10.1 based kernel .
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
there is no cwm for locked bootloader on gb, that's why i didn't mention it. You have to unlock bootloader, install custom kernel prerooted and with cwm.
What do you mean for stock kernel and cm10.1 kernel? I am confused. Stock kernel is one thing and cm10.1 kernel is another thing. cm10.1 kernel you can find it inside the zip with the rom you have to download.
rabin69x said:
I'm using xperia u. and its in GB build version is 6.0.B.1.564
I want to flash custom ROM. so there might be a chance to break my phone. to avoid this I want to know how to flash an official stock ROM in offline via flashtools. can anyone help me?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
To flash stock rom there is no need to unlock bootloader but to flash custom one you need to unlock bootloader..... And there are two types of bricked phone 1st soft brick(which can be repair) 2nd hard brick (which can not be repaired) so if you do something wrong and your phone get hard brick you can't repair it and also unlocking bootloader can hard Brick your phone so only do it when you know everything about it... But if you soft brick it you can repair it by downloading stock rom and flashing it with flashtools
Sent from my ST25i using xda app-developers app
sauravrockable said:
To flash stock rom there is no need to unlock bootloader but to flash custom one you need to unlock bootloader..... And there are two types of bricked phone 1st soft brick(which can be repair) 2nd hard brick (which can not be repaired) so if you do something wrong and your phone get hard brick you can't repair it and also unlocking bootloader can hard Brick your phone so only do it when you know everything about it... But if you soft brick it you can repair it by downloading stock rom and flashing it with flashtools
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
is that mean?
soft break- software break
hard break hardware break
Sent from my ST15i using xda app-developers app
I think I'm confusing us and myself. so
1. no matter which ROM I use how can I flash GB or ics stock ROM via PC/flash tools in offline. It should work 100% (because xperia u got only limited internal memory. and that's why I can't keep backup files alway . and if I break my phone I will not able to use internal memory to copy any files there)
2. can I switch between any to any type ROM like
GB to cm10
cm10 to ICS
3. can I switch between stock gb to custom ICS ROM directly?
I will unlocked my bootloader
Sent from my ST15i using xda app-developers app
rabin69x said:
is that mean?
soft break- software break
hard break hardware break
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
All I know soft brick is when your phone is responding but not working and hard brick is when phone does not respond
PRESS THANKS IF I HELPED
Sent from my ST25i using xda app-developers app
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
If you want to flash stock ROM then there is no need to unlock bootloader but if you want custom then you need too...
PRESS THANKS IF I HELPED
Sent from my ST25i using xda app-developers app
I want to use custom ICS ROM. is that possible for me? becoz I'm on stock gb now. I have to root my phone. for that do I need unlocking?
Sent from my ST15i using xda app-developers app
rabin69x said:
I want to use custom ICS ROM. is that possible for me? becoz I'm on stock gb now. I have to root my phone. for that do I need unlocking?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
No. You have to root and install cwm. If you want to install custom kernel you have to unlock your bootloader, otherwise there is no reason doing so.
I want to upgread my GB phone to ICS (c.1.0). how can I do that?
do I need to upgrad b.1.1 then c.1.0 or direct to c.1.0 ?
does it(c.1.0) need unlocking?
Sent from my ST15i using xda app-developers app
rabin69x said:
I want to upgread my GB phone to ICS (c.1.0). how can I do that?
do I need to upgrad b.1.1 then c.1.0 or direct to c.1.0 ?
does it(c.1.0) need unlocking?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
No need to unlock, it's not a custom kernel. It's all stock. I told it to you already
You have to use flashtool.
Download this one : http://forum.xda-developers.com/showthread.php?t=2029415 it's ics firmware.
Now you have to download flashtool. This is where you can download it: http://androxyde.github.io/
Now you have to flash the rom.
Here you will find a video on how to flash the rom. The procedure is the quite the same.The only thing that changes is when you have to plug usb cable on phone, you will see the instructions on the video, you have to press volume down button and not back button. link for the video :http://www.youtube.com/watch?v=JmmThXTWu74
DaRk-L0rD said:
No need to unlock, it's not a custom kernel. It's all stock. I told it to you already
You have to use flashtool.
Download this one : http://forum.xda-developers.com/showthread.php?t=2029415 it's ics firmware.
Now you have to download flashtool. This is where you can download it: http://androxyde.github.io/
Now you have to flash the rom.
Here you will find a video on how to flash the rom. The procedure is the quite the same.The only thing that changes is when you have to plug usb cable on phone, you will see the instructions on the video, you have to press volume down button and not back button. link for the video :http://www.youtube.com/watch?v=JmmThXTWu74
Click to expand...
Click to collapse
thanks man
Sent from my ST15i using xda app-developers app
DaRk-L0rD said:
No need to unlock, it's not a custom kernel. It's all stock. I told it to you already
You have to use flashtool.
Download this one : http://forum.xda-developers.com/showthread.php?t=2029415 it's ics firmware.
Now you have to download flashtool. This is where you can download it: http://androxyde.github.io/
Now you have to flash the rom.
Here you will find a video on how to flash the rom. The procedure is the quite the same.The only thing that changes is when you have to plug usb cable on phone, you will see the instructions on the video, you have to press volume down button and not back button. link for the video :http://www.youtube.com/watch?v=JmmThXTWu74
Click to expand...
Click to collapse
it seems like if I flash this ROM. I will not be able to root my phone.
any easy way to rooting this without unlocking?
Sent from my ST15i using xda app-developers app
rabin69x said:
it seems like if I flash this ROM. I will not be able to root my phone.
any easy way to rooting this without unlocking?
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
Flash b.10 or b.54. I think b.10 it's easier to root.
DaRk-L0rD said:
Flash b.10 or b.54. I think b.10 it's easier to root.
Click to expand...
Click to collapse
First flash rom you want than flash. 10 kernel root on that than again flash. 100 kernel
Sent from my ST25i using xda app-developers app