Newbie here please be patient. Looked high and low in XDA did not find my answer.
Triangle away or jig does not work to reset custom ROM counter. Triangle away error message “Missing magic header”.
Would I be able to repeatedly reset custom ROM counter with jig or Triangle Away after new new custom ROM install if I do the following?
1. Flash back to stockroot UCKH7. I have stockroot.tar
2. Install AoCP 5.9.5 directly? I want JB 4.2.2 and update to newer versions in future
3. Flash only the UCMD8 modem.
Current state and history -
SGH i77 – Unlocked, Rooted, Base band curent UCMD8 from official att update but via odin, previous UCLE5, UCKH7 (factory)
Kernel – Jeboo, previous Siyah which went away after AoCP ROM install
ROM – Current AoCP 5.9.5. Previous AoCP 5.9, 5.7; AOKP all installed with UCLE5 present
Thanks
Just out of curiosity, why does it matter to you if the triangle is there? You still have a warranty? I just traded mine in for my s4 at att and they didn't care about the triangle... just in case that's your reason.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
goodjuju said:
Newbie here please be patient. Looked high and low in XDA did not find my answer.
Triangle away or jig does not work to reset custom ROM counter. Triangle away error message “Missing magic header”.
Would I be able to repeatedly reset custom ROM counter with jig or Triangle Away after new new custom ROM install if I do the following?
1. Flash back to stockroot UCKH7. I have stockroot.tar
2. Install AoCP 5.9.5 directly? I want JB 4.2.2 and update to newer versions in future
3. Flash only the UCMD8 modem.
Current state and history -
SGH i77 – Unlocked, Rooted, Base band curent UCMD8 from official att update but via odin, previous UCLE5, UCKH7 (factory)
Kernel – Jeboo, previous Siyah which went away after AoCP ROM install
ROM – Current AoCP 5.9.5. Previous AoCP 5.9, 5.7; AOKP all installed with UCLE5 present
Thanks
Click to expand...
Click to collapse
It depends on the kernel. I got it to work with STi or AJK (I can't remember which). It's annoying, isn't it?! That's the only reason I wanted it removed!
Whizzpopper - Did either of the kernels you named work after the official ATT JB updat? Or did you have to roll back to UCKH7 first?
By the way, I rooted after official update using Jeboo, But when I installed AoCP ROM it got replaced with CWM. Similarly when I tried Siyah it got replaced with CWM. So do not know if AJK or STi will stick.
Toakster - Just because I am square? Seriously, why put up with the triangle when it means nothing?
same here does not work on my sgh-s2-i777 even tho even tho im rooted on stock at 4.1.2
is there another way or am i missing something?
mrdreamers said:
same here does not work on my sgh-s2-i777 even tho even tho im rooted on stock at 4.1.2
is there another way or am i missing something?
Click to expand...
Click to collapse
Developer's thread does not currently list this phone as supported. If I remember correctly, it used to be supported, and I know for sure that it worked on Ice Cream Sandwich, but it may not work on Jelly Bean. Or, it may be necessary to use an older version in combination with ICS. I don't really know as I have not tested it in a long time.
CONFIRMED
mrdreamers said:
same here does not work on my sgh-s2-i777 even tho even tho im rooted on stock at 4.1.2
is there another way or am i missing something?
Click to expand...
Click to collapse
Yeah I seccond that, I'm also running 4.1.2 STOCK JB on i777 and it don't even run, all it say it can do is dump a file to help find the problem or smth.
if you look at the app's official website, it does not support i777 anymore, so maybe you could try reverting back to ICS use an older version of the app and then use MobileOdin to flash the new custom ROM without tipping the wire.
Related
Is it safe from 'brick-bug'? (The CAP_ERASE, hardbrick when wipe data or restore from backup with 4.0.4)
Thanks
yes, siyah has disabled it in all his kernals.
good to know, thanks!
WOW
Nice bro, thank you for the straight answer. Man I been searching and studying this thing forever and finally found a person who gave a direct answer. Much respect from my side. I have flashed my phone hundreds of times with siyah kernel, the only kernel I ever use but the got brick bug app says I have an insane kernel. And so my never ending mission for a simple answer began. I use the xxlpq modem and yet some places suggest the xxlpq 'FIRMWARE' has the brick bug for sure. This whole kernel modem leaked official story confused the heck out of me. But now thankfully I have an answer but am still confused as a duck in a waterfall. If I am getting it correctly, a modem is different from a firmware when using siyah kernel and a custom rom, not an officially released rom? So when I use, let say PFittech 4.04 rom and xxlpq modem with siyah kernel, then I am safe because the creator of the awesome siyah kernel has not included the cap_erase robocop destroyer thingy?
However, if I had to try flash to stock and used cf root/odin and then flashed the xxlpq firmware(leaked or not), then it is relatively certain I will get hard bricked and ruine my year? Anyways, this flashaholic feels more at ease now. Thanks for your simple reply, it is rare these days.
PsyOr said:
Is it safe from 'brick-bug'? (The CAP_ERASE, hardbrick when wipe data or restore from backup with 4.0.4)
Thanks
Click to expand...
Click to collapse
Siyah kernel has disabled the cap_erase command, Yes.
If you are on stock ICS 4.0.4, then flash Siyah 3.5.2 and above.
3.4.x and below are not 100% compatible with 4.0.4. If you flash it, your camera app will be displaying just black screen.
Swyped from my Samsung Galaxy SII
All the latest Siyah Kernel has no brickbug on it. Currently using 4.0.2
Sent from my GT-I9100 using Tapatalk
I've always used custom roms on my galaxy. I was even using in dual-boot, a Jelly Bean Revolt and other stock. I was testing a new stock, and flashed it with Odin Mobile. I ended up losing custom. Since then, I can no longer flashing custom roms, even having problems flashing a new kernel. I use the CWM, do the wipes and flash the* rom, but after the reboot, it starts a boot loop with the galaxy s2 logo. The phone is inoperable. At least the download mode works, and I ended up going back to stock a few times. I even tried and flash another custom roms, but the same problem happens.
Anyone know how to help??
gu_cad said:
I've always used custom roms on my galaxy. I was even using in dual-boot, a Jelly Bean Revolt and other stock. I was testing a new stock, and flashed it with Odin Mobile. I ended up losing custom. Since then, I can no longer flashing custom roms, even having problems flashing a new kernel. I use the CWM, do the wipes and flash the* rom, but after the reboot, it starts a boot loop with the galaxy s2 logo. The phone is inoperable. At least the download mode works, and I ended up going back to stock a few times. I even tried and flash another custom roms, but the same problem happens.
Anyone know how to help??
Click to expand...
Click to collapse
Flash a 3-parted stock firmware and activae "re-partition" in Odin.
After this flash a rooted kernel .tar (cf-root, speedmod, etc.) via Odin.
Now start flashing again.
Hope this works.
CHEERS
Hannibal226 said:
Flash a 3-parted stock firmware and activae "re-partition" in Odin.
After this flash a rooted kernel .tar (cf-root, speedmod, etc.) via Odin.
Now start flashing again.
Hope this works.
CHEERS
Click to expand...
Click to collapse
I've read about emmc brick. And this problem started after using a LQ6 4.0.4 stock rom.
I even used the "emmc brick check", and it shows "YES. Insane chip".
I flashed now a 2.3.6 stock rom. But i haven't tried to flash another custom rom yet.
Should i proceed as you say???
And sorry for my noobness, but what is a 3 parted stock rom?
gu_cad said:
I've read about emmc brick. And this problem started after using a LQ6 4.0.4 stock rom.
I even used the "emmc brick check", and it shows "YES. Insane chip".
I flashed now a 2.3.6 stock rom. But i haven't tried to flash another custom rom yet.
Should i proceed as you say???
And sorry for my noobness, but what is a 3 parted stock rom?
Click to expand...
Click to collapse
it contains a .pit file for re-partition and 2 other files,but u should be carefull in using the .pit file though, since it could potentially hardbrick ur device ma8
instead try updating ur device from GB 2.3.6 to a stock v4.0.3(do not flash any 4.0.4 ICS firmware) ICS firmware either thro 'KIES' or 'ODIN', then root ur phone and try installing a custom ICS rom of ur choice and see
Sun90 said:
it contains a .pit file for re-partition and 2 other files,but u should be carefull in using the .pit file though, since it could potentially hardbrick ur device ma8
instead try updating ur device from GB 2.3.6 to a stock v4.0.3(do not flash any 4.0.4 ICS firmware) ICS firmware either thro 'KIES' or 'ODIN', then root ur phone and try installing a custom ICS rom of ur choice and see
Click to expand...
Click to collapse
I'll try what you're saying.
I'm updating to a 4.0.3 through odin. After root, can i install directly a Jelly bean rom?
gu_cad said:
I'll try what you're saying.
I'm updating to a 4.0.3 through odin. After root, can i install directly a Jelly bean rom?
Click to expand...
Click to collapse
after root first install a custom kernel either siyah or dorimanx latest and then try installing a JB rom compatible with them and see
Sun90 said:
after root first install a custom kernel either siyah or dorimanx latest and then try installing a JB rom compatible with them and see
Click to expand...
Click to collapse
I've already updated to 4.0.3
If i'm flashing Jelly Bam Rom for an example, do i need to install these kernel before, since the rom already has it in the AROMA installer???
And should do the wipes before it/??
Thanks!
gu_cad said:
I've already updated to 4.0.3
If i'm flashing Jelly Bam Rom for an example, do i need to install these kernel before, since the rom already has it in the AROMA installer???
Thanks!
Click to expand...
Click to collapse
yes it will be there in Aroma but for a perfect trouble free install i suggested the same, rest is ur call ma8, fell free todo so the way it looks good for u
Sun90 said:
yes it will be there in Aroma but for a perfect trouble free install i suggested the same, rest is ur call ma8, fell free todo so the way it looks good for u
Click to expand...
Click to collapse
Thanks.
It only worked with with previous instalation of dorinmax kernel. So i had to use Revolt Jelly Bean Rom.
When i tried to flash Jelly Bam Rom, got into galaxy s2 loop, after reboot.
At least, i've got one custom rom.
Now it's so much more difficult to install a rom on my phone. Only because i used that 4.0.4.
There's no way back, right?
My warranty ends in November 30th.
:/
gu_cad said:
Thanks.
It only worked with with previous instalation of dorinmax kernel. So i had to use Revolt Jelly Bean Rom.
When i tried to flash Jelly Bam Rom, got into galaxy s2 loop, after reboot.
At least, i've got one custom rom.
Now it's so much more difficult to install a rom on my phone. Only because i used that 4.0.4.
There's no way back, right?
My warranty ends in November 30th.
:/
Click to expand...
Click to collapse
That's why I said to completely go back on a stock firmware with Odin.
But 3 parted (and for sure with .pit-file then, forgot to say this) and check repartition.
But u have to choose... A phone which turns screen on an just looping or a chance from 80% to 20% for getting phone working again or bricking it.
I personally hadn't any prob til now, but only went back 4-5 times ins 2-3 years (also did the same with SGS before SGSII)
So u got my answer u have to choose.
Anyway u can send it back because warranty and if they fix it, it's fine... If not u can try it by urself anyway
CHEERS
Send from my SGSII-i9100, running RootBox nightly with Dorimanx Kernel.
I went to samMobile firmware site and going to download, 4.0.3 ics or the GB firmware. I currently have ics 4.0.4 and my phone keeps going into SOD and i have to remove battery to turn back on, so can I flash with oldin one of the other version of firmware to downgrade to 4.0.3 ics without hurting my phone. as a noob and i have been trying to read posts. 4.0.3 befoore the upgate was running good.
You can flash the 4.0.3 UCLE5 from SamFirmware using odin. The file contains everything, including bootloaders I'm pretty sure, and is straight stock, not rooted. You will most likely need to perform a wipe data/factory reset, and there could be some risk involved due to the possible eMMC superbrick bug in the UCLE5 kernel.
Another possible route would be to flash UCLE5 plus root from the development section of this forum. It is a bit safer since the bootloader is removed. After that you should also install a custom kernel to get away from the stock kernel.
Thank You will have alook at JB roms. Hopefully this will fix the SOD issue Att and samsung are pissing meoof, on my 3rd phone with same isssue.
creepyncrawly said:
You can flash the 4.0.3 UCLE5 from SamFirmware using odin. The file contains everything, including bootloaders I'm pretty sure, and is straight stock, not rooted. You will most likely need to perform a wipe data/factory reset, and there could be some risk involved due to the possible eMMC superbrick bug in the UCLE5 kernel.
Another possible route would be to flash UCLE5 plus root from the development section of this forum. It is a bit safer since the bootloader is removed. After that you should also install a custom kernel to get away from the stock kernel.
Click to expand...
Click to collapse
angeleye50 said:
Thank You will have alook at JB roms. Hopefully this will fix the SOD issue Att and samsung are pissing meoof, on my 3rd phone with same isssue.
Click to expand...
Click to collapse
My understanding is that the sleep of death problem is a firmware issue in the 4.0.4 distribution. If that is the case, replacing hardware will not solve the problem. Or maybe your replacements have been for another reason? Anyway, I have never had stock 4.0.4 or stock 4.0.3 on my phone, but I am running a JB rom (SHOstock) and have never had the SOD issue.
stock 4.0.4
creepyncrawly said:
Another possible route would be to flash UCLE5 plus root from the development section of this forum. It is a bit safer since the bootloader is removed. After that you should also install a custom kernel to get away from the stock kernel.
Click to expand...
Click to collapse
Can anyone confirm if this process works coming from stock 4.0.4? I have a friend who asked me to root his device and I would hate for something to happen to someone else's phone. If it's my own, I would just not sleep all night until I've found a way to bring it back.
samusmaurie said:
Can anyone confirm if this process works coming from stock 4.0.4? I have a friend who asked me to root his device and I would hate for something to happen to someone else's phone. If it's my own, I would just not sleep all night until I've found a way to bring it back.
Click to expand...
Click to collapse
Just like anything else , it works the way it's supposed to if directions are followed and appropriate reading is done.
Hi, yesterday I bought a Galaxy S2 from AT&T and I'm a newbie at this. I want to know which is the best kernel for this phone without any brick possibilities.
Because I know the Siyah kernel, but I don't like it just because the Ying-yang symbol at booting process (That's really stupid) and I heard that the Jeboo Kernel leaves your phone with the triangle and without the possibility of booting the phone. Stuck at "Samsung Galaxy S2" and the triangle, so first of all... Is this true? (I mean the bug of the Jeboo Kernel)
And second, if it's true... Which kernel can I use?
I forgot to say...
The S2 has 4.1.2 Stock Unrooted.
Thanks in advance.
Sent from my Nexus 7 2012.
If I'm bad at English is because I'm from Argentina and I'm learning.
MlucianoEze said:
I forgot to say...
The S2 has 4.1.2 Stock Unrooted..
Click to expand...
Click to collapse
Stock unrooted. First you'll need to follow one of many threads detailing how to root the phone, and get cwm onto the i777. Then you'll need to read each kernel forum with recent support for the i777 to determine which is best suited for your needs (stability, rom choice, vanity, whatever). A few big names around here are AJK, jeboo (which works fantastically for it's designed application), and STI.
Happy flashing.
Ok. I'll do that.
Thanks.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
cyril279 said:
Stock unrooted. First you'll need to follow one of many threads detailing how to root the phone, and get cwm onto the i777. Then you'll need to read each kernel forum with recent support for the i777 to determine which is best suited for your needs (stability, rom choice, vanity, whatever). A few big names around here are AJK, jeboo (which works fantastically for it's designed application), and STI.
Happy flashing.
Click to expand...
Click to collapse
One thing more. If I leave the phone with stock unrooted kernel and I do a Factory Reset, will the phone brick?
Because of the eMMC bug with stock unrooted kernel.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
MlucianoEze said:
One thing more. If I leave the phone with stock unrooted kernel and I do a Factory Reset, will the phone brick?
Because of the eMMC bug with stock unrooted kernel.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure that stock 4.1.2 left the eMMC bug behind, the details are in creepyncrawly's repository. Creepyncrawly's signature is the best starting point for modding the I777.
MlucianoEze said:
Hi, yesterday I bought a Galaxy S2 from AT&T and I'm a newbie at this. I want to know which is the best kernel for this phone without any brick possibilities.
Because I know the Siyah kernel, but I don't like it just because the Ying-yang symbol at booting process (That's really stupid) and I heard that the Jeboo Kernel leaves your phone with the triangle and without the possibility of booting the phone. Stuck at "Samsung Galaxy S2" and the triangle, so first of all... Is this true? (I mean the bug of the Jeboo Kernel)
And second, if it's true... Which kernel can I use?
I forgot to say...
The S2 has 4.1.2 Stock Unrooted.
Thanks in advance.
Sent from my Nexus 7 2012.
If I'm bad at English is because I'm from Argentina and I'm learning.
Click to expand...
Click to collapse
MlucianoEze said:
One thing more. If I leave the phone with stock unrooted kernel and I do a Factory Reset, will the phone brick?
Because of the eMMC bug with stock unrooted kernel.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
To your initial question, there is nothing wrong with the Jebo kernel. It was, however, built specifically to go with the SHOstock3 rom. There are a variety of things that can cause the problem you stated. Flashing the wrong kernel for instance, as in flashing an ICS or Gingerbread kernel to a Jelly Bean system, will prevent the phone from booting. As far as the warning triangle at boot, that is caused by flashing a custom kernel using Odin or Heimdall. The screen can also be removed by flashing a stock kernel using Odin or Heimdall.
As far as the cap erase eMMC brick bug is concerned, that showed up in the ICS versions, and was possibly present in the 2.3.4 stock kernel. It may have been present also in the 2.3.6 stock kernel but there was never any direct evidence that it was. The 4.1.2 stock kernel is almost certainly safe. If it were my phone, I would not hesitate to perform a wipe data/factory reset with the 4.1.2 stock kernel.
creepyncrawly said:
To your initial question, there is nothing wrong with the Jebo kernel. It was, however, built specifically to go with the SHOstock3 rom. There are a variety of things that can cause the problem you stated. Flashing the wrong kernel for instance, as in flashing an ICS or Gingerbread kernel to a Jelly Bean system, will prevent the phone from booting. As far as the warning triangle at boot, that is caused by flashing a custom kernel using Odin or Heimdall. The screen can also be removed by flashing a stock kernel using Odin or Heimdall.
As far as the cap erase eMMC brick bug is concerned, that showed up in the ICS versions, and was possibly present in the 2.3.4 stock kernel. It may have been present also in the 2.3.6 stock kernel but there was never any direct evidence that it was. The 4.1.2 stock kernel is almost certainly safe. If it were my phone, I would not hesitate to perform a wipe data/factory reset with the 4.1.2 stock kernel.
Click to expand...
Click to collapse
Tour explained me very well, I understood everything! So thanks.
I will choose the kernel later.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Hi guys
I have the following isue, i flashed my phone and I used this kernel
3.0.31 siyah s2-v6.0b5+ [email protected] #177
Now I cant make calls, I can't hear the person who call me and that person can't hear me, the phone radio doesn't work, sometimes the phone freeze specially when I watching videos. The phone doesn't recognize all internal memory. The return and search button doesn't work, to go back now I have to press the home button.
My question is: can I flash the kernel i have installed and install a new one. What kernel do you recommend me for this phone that works fine and what rom 4.2 is the best for this model.
I really appreciate any help.
Sent from my GT-I9100 using Tapatalk
Your signature says your phone is GT-I9100, but this is the forum for SGH-I777 AT&T version of Galaxy SII. Which phone do you have?
I have an i777 from at&t, after i flashed the kernel the phone model changed from i777 to I9100, but it is an i777 from at&t
Sent from my GT-I9100 using Tapatalk
Did you flash only the kernel, or did you also flash a rom?
What version of the operating system, and what rom are you currently running?
The kernel you flashed was built for the GT-I9100, which has a different hardware configuration from the SGH-I777. You should flash a kernel that was built for the I777, probably AJK, but answer the above questions first before I suggest which one.
First I flashed the kernel and installed the siyah one, then I installed a different rom. I had before 3.2 and then I installed 4.1.2 rom. Can you recommend me a god kernel for the I777 and a good rom if it possible 4.1.2 or 4.2 . I really appreciate your help.
Sent from my GT-I9100 using Tapatalk
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Click to expand...
Click to collapse
You appear to have flashed the GT-I9100 stock XWLS8 full package. Most likely you flashed the I9100 boot loaders with it. You also have an I9100 modem. I'm guessing that you flashed the I9100 siyah kernel afterwards. Your I-777 will not function with that firmware. I am surprised it even booted into system.
First, double verify that you are working with a SGH-I777 by pulling the battery and looking at the label in the battery compartment. After verifying that you have an I-777, you should flash the AT&T version of stock 4.1.2, I777UCMD8 full package which you can get from the download repository.
If you are unsure of anything, or have any questions, please ask before proceeding.
If you want to root and install a custom kernel, or install a custom rom, after getting your phone working again, we can point you in the right direction.
Thanks for your help, yes I verified and it is an i777 from at&t.
A have some questions:
1- I need to flash the kernel first and then install the new one?
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
3-how I get rooted after do that?
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
1- I need to flash the kernel first and then install the new one?
Click to expand...
Click to collapse
No. Flash the I777UCMD8 full package from the download repository first. It contains the complete firmware, including stock kernel, stock system, an AT&T modem, and the I777 boot loaders. You can do any modifications after you return the phone to full stock 4.1.2.
3-how I get rooted after do that?
Click to expand...
Click to collapse
I am answering this question next, because it is the next step after flashing the stock firmware. To root, you should use the Framaroot application which you install on your phone. Use the Aragorn exploit. If the latest version doesn't work, download and use an earlier version, like 1.4.2.
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
Click to expand...
Click to collapse
Once rooted, you should use Mobile Odin lite or Mobile Odin Pro to install a custom kernel containing ClockworkMod Recovery. With this stock firmware, you would use AJK v4.9 No Swap.
After downloading the kernel, open the zip file and extract the boot.img. Use that to flash in Mobile Odin. After flashing the capacitive buttons will not work, so immediately reboot into recovery and flash the full AJK v4.9 No Swap package in CWM.
4.1.2 is the latest version of stock firmware available for the I777. If you want the Samsung Touchwiz interface, that is the latest you can get. Anything available 4.2 and above will be AOSP based. You can look in the I777 Android Development forum and the I777 Ported Development forum to see what is available. They all flash from ClockworkMod Recovery.
Ok man thanks, I'll do that, after that I'll let you know how everything goes
Sent from my GT-I9100 using Tapatalk