Hello All
Its been long havent posted anything, Got myself Ultra but somehow my slide app tray from left is missing.... does anyone know do i need to check any option or what
.....Now i am writing here is my review of Ultra for people who are thinking to buy it
Good Bit
Snapy as mclaren F1 (being an apple freak in past anderiod never appealed me but this is so quick no disappointment at all)
Being 6.4inch its manageable, Jeans pocket, tracks never had issues to carry it ( Sony have thought very clever on this)
Thin (Trust me its not thicker than a chocolate bar)
Material used feel posh (Not cheapy plastic of Samsung )
Display is very rich thanks to 1080p
No match of its speed, handling heavy items(games video) and thank god it do not get hang while working on it.
Bad Bit
Camera is still not that great give high noise in picture
Speaker level is way to low (INSTALL SOUND BOOSTER APP)
Ear phone quality sucks
Gorrila glass is not very gorilla front glass get scratches very easily (put screen protector both side before start drawing like they show on tv ad)
As its water prof dont play with water too much as this time no lid for earphone jack its been tempered with some water resistant solvent, excessive usage will wear it out( normal life is about years of that solvent)
If someone is confused with black or white I advice white
first back glass in black tends to get lot of finger prints and look dusty
secondly white side Bazel look like metallic aluminum compare to black cheap plastic
Overall
- It used gorilla glass, but sony has applied the screen protector at both side (the do the same with all the xperia family, if you're not recognized, just look closely in the camera ring) so by the nature of the screen protector, it will scratch easily
- don't used any sound volume enlargement apps, it will break your speaker sooner or later, the low volume is a nice trade-off for the water resistance feature
/- The side benzel of Z-ultra is real metal, unlike the Z, so it's not cheap plastic at all (exclude the top and bottom pieces, which is real plastic! @@)
dead101 said:
Hello All
Its been long havent posted anything, Got myself Ultra but somehow my slide app tray from left is missing.... does anyone know do i need to
Click to expand...
Click to collapse
The side drawer (and other features) is a feature from the next update for the ZU which will be released in september, so just hold tight and wait for it.
twin snakes said:
- It used gorilla glass, but sony has applied the screen protector at both side (the do the same with all the xperia family, if you're not recognized, just look closely in the camera ring) so by the nature of the screen protector, it will scratch easily
- don't used any sound volume enlargement apps, it will break your speaker sooner or later, the low volume is a nice trade-off for the water resistance feature
/- The side benzel of Z-ultra is real metal, unlike the Z, so it's not cheap plastic at all (exclude the top and bottom pieces, which is real plastic! @@)
Click to expand...
Click to collapse
So the glass itself is actually gorilla glass? Which version is it on the ZU? Then why would sony put the shatterproof film when other manufacturer which also use gorilla glass didn't put any preinstalled 'screen protector'?
Oops sorry,my bad, z ultra does not use corning's gorilla glass, it uses own glass, opti contrast
twin snakes said:
Oops sorry,my bad, z ultra does not use corning's gorilla glass, it uses own glass, opti contrast
Click to expand...
Click to collapse
back is gorilla glass.
front dragon glass.
twin snakes said:
- It used gorilla glass, but sony has applied the screen protector at both side (the do the same with all the xperia family, if you're not recognized, just look closely in the camera ring) so by the nature of the screen protector, it will scratch easily
- don't used any sound volume enlargement apps, it will break your speaker sooner or later, the low volume is a nice trade-off for the water resistance feature
/- The side benzel of Z-ultra is real metal, unlike the Z, so it's not cheap plastic at all (exclude the top and bottom pieces, which is real plastic! @@)
Click to expand...
Click to collapse
What do you mean by "has applied the screen protector at both side"?, that the phone screen/back are not glass exposed?
yes, the glass itself is not exposed, and covered by a screen protector on both side, which is applied by sony, just look closely at the border and especially the camera area, all the xperia is the same (not sure about tablet z)
LordManhattan said:
The side drawer (and other features) is a feature from the next update for the ZU which will be released in september, so just hold tight and wait for it.
Click to expand...
Click to collapse
what are the "other features" supposed to be?
kramdens said:
what are the "other features" supposed to be?
Click to expand...
Click to collapse
The X-Reality engine, and a lot of bug fixes is my guess. I can't really think of other noteworthy features, but they're only a google search away.
Does anyone know how to turn this off now as I prefer it without
sjm1982 said:
Does anyone know how to turn this off now as I prefer it without
Click to expand...
Click to collapse
Not possible. Try a different launcher and see if you like it better. I recommend Nova Launcher and Apex Laucher.
Related
I have a little scratch on it, like 4 mm long and when i have a white background, its very good noticeable, it deforms the colors.
I have no screen protector, i ordered 1 yesterday, but it seems i'm to late. I always keep my G1 in the nice pocket that came with it.
Can i do it away, or do i have to live with it ?
CoopZor said:
I have a little scratch on it, like 4 mm long and when i have a white background, its very good noticeable, it deforms the colors.
I have no screen protector, i ordered 1 yesterday, but it seems i'm to late. I always keep my G1 in the nice pocket that came with it.
Can i do it away, or do i have to live with it ?
Click to expand...
Click to collapse
there is a way for non - touch screen phones but i dont think there is a way for touch screen ones, however i could be mistaken
sanding paper 6000 grit+ ( gluck finding those )
or maybe cd scratch remover
I never tried any of those so you might want to wait for a more appropriate answer
** I remove my ps3 scratches with 2k grit sand paper , some wax and voila no more scratches but I'm really not sure if 6000 grit paper or even 8000-12000 grit paper might do the job for a screen. Try it on a very old screen if you ever want to try sanding down your screen
Try using tooth paste, yes toothpaste, the colgate kind, it has some grit to it. No guarantees though, be careful, not responsible for minty fresh dead phones.
or google that stuff advertised in the late 90's to remove scrathes from eyeglasses... was I thing a self leveling polymer or some such.... but not to expencive
MaliceMcGuire said:
or google that stuff advertised in the late 90's to remove scrathes from eyeglasses... was I thing a self leveling polymer or some such.... but not to expencive
Click to expand...
Click to collapse
This is your best bet but you're going to have to be careful not to leave any on the screen where there is no scratch.
These are capacitive touchscreens, the surface of the glass/screen is special.
bad recommendation. sorry
Edit: Nevermind... Applesauce only works for ipods. Evidently it's too abrasive for the iphone, so it would be too abrasive for us too.
moosefist said:
http://www.displex.com/ never tried it, but this is what its for.
Click to expand...
Click to collapse
Attention: use only on non-coated surfaces and plastics; when used on mobile phones, treat only the transparent portions of the display lens. Not for use with touch screen displays.
Google "displex for touch screen" and you will come up with a ton of results saying it is not for touchscreens, especially capacitive like the G1 because it will remove the indium tin oxide that conducts the electric flow across the screen.
i guess sanding is out of question then
i tough there was some plastic protector to protect the real screen
Some of the screen protectors can hide scratches when applied. The Invisible Shield has been known for this due to its flexible material. No guarantees though.
uansari1 said:
Some of the screen protectors can hide scratches when applied. The Invisible Shield has been known for this due to its flexible material. No guarantees though.
Click to expand...
Click to collapse
I can confirm this, I actually just used a screen protector on my old VX6900 Vogue, it made most of the scratches disappear except for this one very very deep one.
I got some of the mirror protectors, a bit meh, kinda covers one of the 2 small scratches on my screen (not that they are that noticeable anyway). I have the standard kind in the post, so I'll try one of those when they get here.
Vaseline works great on most standard LCDs. The day I bought a 19" WS LCD I knocked it over, coffee all over it, but on it's way down it caught the edge of my baccy tin, leaving a bright blue stuck pixel in the middle of a scratch (arghh). Luckily I was able to massage out the pixel and cover over the scratch with some clear Vaseline, it's still visible, but only from extreme angles (way beyond the viewing angle of the screen).
AdamPI said:
I got some of the mirror protectors, a bit meh, kinda covers one of the 2 small scratches on my screen (not that they are that noticeable anyway). I have the standard kind in the post, so I'll try one of those when they get here.
Vaseline works great on most standard LCDs. The day I bought a 19" WS LCD I knocked it over, coffee all over it, but on it's way down it caught the edge of my baccy tin, leaving a bright blue stuck pixel in the middle of a scratch (arghh). Luckily I was able to massage out the pixel and cover over the scratch with some clear Vaseline, it's still visible, but only from extreme angles (way beyond the viewing angle of the screen).
Click to expand...
Click to collapse
Sounds good for a tv but for a touch screen device....vaseline? would make for a difficult experience
crpercodani said:
Sounds good for a tv but for a touch screen device....vaseline? would make for a difficult experience
Click to expand...
Click to collapse
Yeah I mean it won't work on a phone, it's pretty good on a proper LCD, I think because the refractive properties are far closer to the material than air.
So I've read that a few people on this forum have removed their Factory ASF, though I haven't read much feedback on how this affected the device:
- was the sensitivity of the screen altered?
- did the screen quality change?
- is there sticky residue left after removal?
- if so, does the residue come off after a few weeks of removal?
I've watched several videos where the ASF is removed off of the Xperia Z, but I have yet to come across videos for the Xperia TABLET Z.
(Just Search "Xperia Z anti shatter film removal" on Youtube)
So far, the feedback is good for removing the ASK off the Xperia Z, but is it really safe for the Xperia Tablet Z?
Should I :
a) Remove the ASF and leave it as so
b) Remove the ASF and purchase a screen protector.
c) Leave the ASF on and purchase a screen protector
I have no scratches on my device yet, but I am afraid of having some in the future due to the fragility of the ASF.
Thanks!
I recklessly went ahead and removed the ASF with a box cutter and peeled of the film and I am satisfied with the results!
Youtube link : youtube.com/watch?v=xuwHzRYnzQY (sorry, new user -> cant post links)
The SONY logo is still on, but after washing the surface with a cloth and water, most of the adhesive is gone and it has a much better feel to it than the default film!
With that said, I plan on purchasing a Screen Protector anyways and have just bought the Poetic Slimline Case.
So far, I like the change because there is:
>Less Friction (After washing the tablet)
>Bettter Responsiveness
>Scratch resistance that eclipses the ASF
>A more premium feel to the screen
This DOES void your warranty so be wary of that, but in my opinion this was a worthwhile change!
I have been thinking about doing this since the day I got my xtz and an hour later seeing a small scratch. Does the true screen really seem more scratch proof?
Sent from my SGP311 using Tapatalk HD
jmikeb92 said:
I have been thinking about doing this since the day I got my xtz and an hour later seeing a small scratch. Does the true screen really seem more scratch proof?
Sent from my SGP311 using Tapatalk HD
Click to expand...
Click to collapse
It actually is resistant to scratches, I have absolutely no idea why Sony decided to apply a scratchable film on top of their scratch resistant screen, it really seems like nonsense. Plus, the glass surface seems smother after washing it, so I definitely recommend doing it, I doubt it affects shatter resistance, if you drop your tablets from 1 meter/3ft, it's screen is likely to break either way.
I ordered the Poetic Slimline Case, so that'll add protection to the tablet too; it theoretically renders the ASF's "purpose" useless since it offers shock redistribution. The screen remains a fingerprint magnet, though, but it's not as bad as having the film on.
My Questions: Answered
Q - was the sensitivity of the screen altered?
A: Yes, The screen feels more responsive. An overall improvement. +1
Q - did the screen quality change?
A: The screen is definitely clearer and fingerprints are less prominent An overall improvement. +1
Q - is there sticky residue left after removal?
A: Yes, but a cloth and water or a screen washing solution removes it after a bit of rubbing, not much effort is needed.
Q - if so, does the residue come off after a few weeks of removal?
A: Refer to above answer.
padooka said:
So I've read that a few people on this forum have removed their Factory ASF, though I haven't read much feedback on how this affected the device:
- was the sensitivity of the screen altered?
- did the screen quality change?
- is there sticky residue left after removal?
- if so, does the residue come off after a few weeks of removal?
I've watched several videos where the ASF is removed off of the Xperia Z, but I have yet to come across videos for the Xperia TABLET Z.
(Just Search "Xperia Z anti shatter film removal" on Youtube)
So far, the feedback is good for removing the ASK off the Xperia Z, but is it really safe for the Xperia Tablet Z?
Should I :
a) Remove the ASF and leave it as so
b) Remove the ASF and purchase a screen protector.
c) Leave the ASF on and purchase a screen protector
I have no scratches on my device yet, but I am afraid of having some in the future due to the fragility of the ASF.
Thanks!
Click to expand...
Click to collapse
I removed the shatterproof film on mine within a week of getting the tablet. I hate the feel of screen protectors and like to leave all my devices unprotected!
Anyway, I'd highly recommend anyone thinking of it to go ahead and remove it. YES, it does improve touch sensitivity and its so much better to touch real glass than a plastic film. I didn't notice much change in the display quality and would love to see a kernel which will let me change some of the gamma settings (way too warm for me now and blacks aren't dark enough).
Removing the film is not that easy and there will be some residue left behind but it comes off with a days use.
I also removed the film.
Now I find the color reproduction better, picture seems brighter, touch sensitivity unchanged.
And indeed the feeling of touching glass is better!
Only thing is, now the rim is a bit higher than the screen glass (just the amount that equals the thickness of the Sony screen protector which is surprisingly thick), which doesn't feel as smooth to the fingers when holding the device.
You can adjust the white balance by rooting the tablet and installing the white balance from the Xperia ZL. There is a thread somewhere (Xperia ZL white balance ported to Xperia Z or so) with instructions how to install. Works flawlessly here. For removing the yellowish/greenish tint, you have to increase the saturation of blue/violet tones (complementary color).
I can't seem to get the peeling started any pointers?
Sent from my SGP311 using Tapatalk HD
You have to cautiously lift one corner of the film with a very thin blade, for instance a carpet knife. Then you can grab the film and peel it off.
I am using Poetic Slim Case. It perfectly fits with luxury look and feel.
I bought Sony case and returned within an hour after walked out of the store. Ridiculous expensive but feel cheapo.
padooka said:
I ordered the Poetic Slimline Case, so that'll add protection to the tablet too; it theoretically renders the ASF's "purpose" useless since it offers shock redistribution. The screen remains a fingerprint magnet, though, but it's not as bad as having the film on.
Click to expand...
Click to collapse
Zb134 said:
I removed the shatterproof film on mine within a week of getting the tablet. I hate the feel of screen protectors and like to leave all my devices unprotected!
Anyway, I'd highly recommend anyone thinking of it to go ahead and remove it. YES, it does improve touch sensitivity and its so much better to touch real glass than a plastic film. I didn't notice much change in the display quality and would love to see a kernel which will let me change some of the gamma settings (way too warm for me now and blacks aren't dark enough).
Removing the film is not that easy and there will be some residue left behind but it comes off with a days use.
Click to expand...
Click to collapse
Love the feeling without sticky oil and fingerprint!!! But i gonna get another screen protector for anti-glare purpose. Thanks for experiences
Ryu_1806 said:
Love the feeling without sticky oil and fingerprint!!! But i gonna get another screen protector for anti-glare purpose. Thanks for experiences
Click to expand...
Click to collapse
I am still rocking the shipping plastic screen which goes over the ASF. lol.
I'd just like to point out the "purpose" of the shatterproof screen protector is to prevent shattering (key word being shatter meaning shards of glass coming Off the screen the screen) which the protector does its job and keeps the shards on the device thus making it shatterproof. It does not make it crack proof. And replacing with another screen protector Will retain the original shatterproof ability. I am happy to have stumbled across this thread as I was unaware there was a protector and was mad that it scratched so easily. Now I have a way to remove those scratches.
I have to be entirely honest here, i got my XTZ 4 months ago and i just now realised it even has an antishatter film
i was directed here by another kind member, after noticing my EasyAcc case was causing scratches on the screen.
I am glad that the screen itself has not been scratched, but instead the ASF. Was effing annoyed when I saw the scratches!
Now that I know it is just the ASF I am going to keep it on and allow it to take more punishment before I take it off! Then i'll decide whether to buy another protector or leave the screen naked.
Was considering getting the Official Sony case, but feedback from people here is not good, so I guess the seach continues for an alternative case.
I'd recommend against buying the Sony case. It's too expensive for the design and quality. My first one was damaged within 2 months of normal use.... Luckily they replaced it.
Sent from my SGP311 using XDA Premium HD app
removing ASF from my tablet Z is the best thing I have done..... sharper and more responsive with my stylus.... and more ....
the best is the fingers print ... without the film minimum print.....
don't tell Sony lol
I just removed mine almost two years after I bought the tablet. Brilliant. You can imagine the level of scratching on the tablet by now!!!! Now, let's get lollipop and it'll feel like that I got a brand new tablet for nothing!
Removed mine after many years with this tablet and sadly regret:
- Glass is uncoated so feels worse to touch, has higher friction, and picks up oily marks. Refraction from fingerprints is now visible when the display is on; oleophobic coating normally prevents this
- Screen appearance is identical, no change in colours/contrast/etc. I'm a nerd when it comes to monitor calibration so I don't say this lightly!
- Most importantly: touch input is degraded. I have verified with the developer tools that swipes misbehave - either registering as a tap, or as a swipe that jumps to the corner of the screen. Scrolling feels broken now - often fails to continue momentum scrolling after removing finger due to the corner jump
Overall would not recommend, the digitiser is calibrated for the ASF to be present. The only positive is fewer scratches.
I am planning to buy a GadgetShieldz complete body protection. The question is does Z U need it? And if I put a screen protector will the pencil write properly on the screen?
Thanks!
Old topic here on the forum. Yes you probably should think about buying a screenprotector if you going to use a pen. Its an ordinary plastic sheet on the screen molded on and it will get scratched VERY easy. Also the oleofobic coating will wear off with time. In about three months you are going to notice the sheet getting more of a rough texture where you push and swipe your fingers often.
I would say that the stock screen protector has very a low quality in terms of its lifetime and ability to resist scratches.
Examples of quality screen protector:
http://glass4m.com/collections/sony/products/mocolo-for-sony-xperia
and
http://glass4m.com/collections/sony/products/glass-m-sony-xperia
About the GadgetShieldz. I have never heard of this company before. But its the same bull**** crap salesman promises that its "precision manufactured" and "scratch proof" that you see all around Ebay and small websites out there on the interweb.
Its a plastic sheet okay. Enough of the bragging about the so said quality. Plastic is plastic. Or vinyl or whatever it is.
If you want a screen protector. Try out a solid sheet of glass. Like the ones I linked above or if you find something promising out there.
Edit: Oh yeah I forgot. No a screen protector will for the most not disturb the ability to discover pen input. And If you do notice that input skips now and then you can always modify the sensitivity of the touch panel by editing a text file
SÜPERUSER said:
Old topic here on the forum. Yes you probably should think about buying a screenprotector if you going to use a pen. Its an ordinary plastic sheet on the screen molded on and it will get scratched VERY easy. Also the oleofobic coating will wear off with time. In about three months you are going to notice the sheet getting more of a rough texture where you push and swipe your fingers often.
I would say that the stock screen protector has very a low quality in terms of its lifetime and ability to resist scratches.
Examples of quality screen protector:
http://glass4m.com/collections/sony/products/mocolo-for-sony-xperia
and
http://glass4m.com/collections/sony/products/glass-m-sony-xperia
About the GadgetShieldz. I have never heard of this company before. But its the same bull**** crap salesman promises that its "precision manufactured" and "scratch proof" that you see all around Ebay and small websites out there on the interweb.
Its a plastic sheet okay. Enough of the bragging about the so said quality. Plastic is plastic. Or vinyl or whatever it is.
If you want a screen protector. Try out a solid sheet of glass. Like the ones I linked above or if you find something promising out there.
Edit: Oh yeah I forgot. No a screen protector will for the most not disturb the ability to discover pen input. And If you do notice that input skips now and then you can always modify the sensitivity of the touch panel by editing a text file
Click to expand...
Click to collapse
Thanks a ton friend. Firstly, I have been using GadgetShieldz for about 5 years now. On different phones, it has performed beyond my expectations. However, my question was simply this, that will I need a screen protector, to which I've got my reply, Yes.
And secondly, will using a protector hinder in use of a pen. To which you said, No. But would like if someone using GadgetShieldz replies with their feedback.
But thanks a lot..
I have no experience with the gadgetsheildz so can not comment but i have the Mocolo glass protector (from Superusers link above) on both the front and back of my ZU. My ZU already had a few tiny scratches on the original ASF which have now all but vanished with the mocolo glass in place.
However after testing with both pen and pencil and a coin to test the screenwrite input ability (All worked well and recognition was pretty smooth) the mocolo appears to have picked up a few micro scratches around the area i tested. I Cant be sure what caused it to scratch but i decided to not to use anything other than my finger for input and the write/text input isnt a feature i use much.
Other things i noticed are that although the ZU is huge and can be rather awkward to hold on occasion, i found with the front and back glass applied it has become "more" awkward as it now feels so slippy when holding and it definately moves around the table top a bit too freely for my liking...
Also consider the weight. With both sheets of glass in place there is a definite increase in the overall weight of the device. Many will say the increase is negligible but i find coupled with slippy hand feel, the slightly heavier package just adds to the overall awkwardness of the device.
However there is peace of mind knowing the original glass underneath is well protected :fingers-crossed:
I'm sure these issues could be rectified with the use of a gel case on back which i am considering as my ZU looks amazing and the above glass protector fits like a glove but the phone feels more fragile/vulnerable than before.
My backside has cracked. And I like it. Because it shows that my mocolo did the job it was designed to. :good: I might buy a new set later on. It has not affect my user experience because there are no sharp ends or pieces of glass that can hurt me.
What I like about it is that it makes the z ultra rigid and more durable. Without the sheets I can easily bend my device so I just find it positive to have the sheets. And I just love the extra weight and feeling of glass
SÜPERUSER said:
My backside has cracked. And I like it. Because it shows that my mocolo did the job it was designed to. :good: I might buy a new set later on. It has not affect my user experience because there are no sharp ends or pieces of glass that can hurt me.
What I like about it is that it makes the z ultra rigid and more durable. Without the sheets I can easily bend my device so I just find it positive to have the sheets. And I just love the extra weight and feeling of glass
Click to expand...
Click to collapse
When you say the back has cracked do you mean the glass underneath the protector has cracked, or has the mocolo glass cracked?
The worry is the front underside glass cracking which from all accounts renders the device non functional to any touch.
Con500 said:
When you say the back has cracked do you mean the glass underneath the protector has cracked, or has the mocolo glass cracked?
The worry is the front underside glass cracking which from all accounts renders the device non functional to any touch.
Click to expand...
Click to collapse
The backside mocolo glass has cracked :good:
a question about screen
Hello everyone,
This is my first post here. I have ordered Z Ultra which will be delivered most probably tomorrow. After ordering i read so many complaints about the screen self breaking problem in Xperia Z series and Sony is not covering it in warranty. I am confuse whether to keep the phone or should i return it. Or is there any way to save or protect the screen. Will applying tempered glass protector solve the problem. People has complained screen cracks even after few days of purchase. I am worried about it, dont want to waste my hard earned money
Please suggest guys about the protector.
Thanks in advance.
Sandeep Bharaj
sandeep_bharaj said:
Hello everyone,
This is my first post here. I have ordered Z Ultra which will be delivered most probably tomorrow. After ordering i read so many complaints about the screen self breaking problem in Xperia Z series and Sony is not covering it in warranty. I am confuse whether to keep the phone or should i return it. Or is there any way to save or protect the screen. Will applying tempered glass protector solve the problem. People has complained screen cracks even after few days of purchase. I am worried about it, dont want to waste my hard earned money
Please suggest guys about the protector.
Thanks in advance.
Sandeep Bharaj
Click to expand...
Click to collapse
If you keep it out of your trousers pockets and not placing it where it can be bent (Yes the Z ultra can be bent very easy) .i.e. for example between your doorkeys and heavy books in your bag or tight pockets in your skinny jeans. Or subjecting your device to fast temperature changes for example from direct sunlight indoors to minus degrees winter outdoors and vice versa. Keep it in your pocket to ease the temperature change etc.
Think about the phone like its a glass oven baking dish because it has two safety glass sheets and addition to that it has air trapped inside it because the Z ultra is waterproof or at some level at least (1meter/30min?)
If you are careful where you put it then you don't have to worry that the screen might self crack. I hope I did not scare you now.. :silly:
I have not had an issue with my screen yet at least so you can relax
I put an illumishield screen protector over the stock screen, because of what I read about scratches. So screen protectors are from and back.
Getting the DSC-QX10 lens, so I got the adapter SPA-ACX3 for XZ. Lens locks onto the back of mobile ? Phone .
Plus, I wrap my XZ in a microfiber cloth , and carry in my messenger bag, with NFC Bluetooth headphones .
Sent from my C6806 using XDA Free mobile app
SÜPERUSER said:
If you keep it out of your trousers pockets and not placing it where it can be bent (Yes the Z ultra can be bent very easy) .i.e. for example between your doorkeys and heavy books in your bag or tight pockets in your skinny jeans. Or subjecting your device to fast temperature changes for example from direct sunlight indoors to minus degrees winter outdoors and vice versa. Keep it in your pocket to ease the temperature change etc.
Think about the phone like its a glass oven baking dish because it has two safety glass sheets and addition to that it has air trapped inside it because the Z ultra is waterproof or at some level at least (1meter/30min?)
If you are careful where you put it then you don't have to worry that the screen might self crack. I hope I did not scare you now.. :silly:
I have not had an issue with my screen yet at least so you can relax
Click to expand...
Click to collapse
Thanks alot for the reply
I am using it since 4 days with all possible precautions. I havnt put it in my jeans pocket yet. Carrying it in shirt's pocket all the time
Secondly i get in insured :thumbup:
If in case its screen breaks, i ll get something from inssurance company.. actualy phone is really good at d price i got so didnt returned..
Thanks for d suggestions, i ll take care about the temprature change.. will avoid sudden temperatures..
Sent from my GT-N7000 using XDA Free mobile app
I wish I didn't listen to the people that told me I didn't need on for the i9100. I had to live with that scratch for nearly 15 months.
Got one from day one with this, and will do for all future phones until I can trust there won't be a single scratch over the life of the phone.
screen protector..
X0LARIUM said:
I am planning to buy a GadgetShieldz complete body protection. The question is does Z U need it? And if I put a screen protector will the pencil write properly on the screen?
Thanks!
Click to expand...
Click to collapse
yes.. you need that... i would prevent you screen from scratches.. z ultra is not protected by corning gorilla glass or something.. its just a shatter proof glass.. so its better to buy a screen protector
jsonexe said:
yes.. you need that... i would prevent you screen from scratches.. z ultra is not protected by corning gorilla glass or something.. its just a shatter proof glass.. so its better to buy a screen protector
Click to expand...
Click to collapse
Got onE!!
Attached are the photos of the 6T solid suit and the impact screen protector that I just installed this morning. The solid suit feels amazing and the screen protector is film and feels like glass, but is definitely not glass, just so there is no confusion there. It does seem to go from left edge to right edge completely and where I placed it seems to cover the entire screen top to bottom. The slider on the case really works and the buttons are fantastic; smooth and clicky, not at all hard to press. I love both and I'm glad I got them ordered on Black Friday now because two protectors and a case was not inexpensive but they are both super high quality and way more affordable than the glass one from T-Mobile so I'm happy with my purchase. If you have any questions I'll try my best to answer them!
Also, don't mind the doggo, she likes being in pictures.
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone....
And how's the slider button? Is it flimsy?
lemonspeakers said:
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone.... Nn
And how's the slider button? Is it flimsy?[/QUOTENnnnn n N
The buttons are great, I handed someone else my phone so two people could verify that they are very clicky and easy to push. The slider has some play in it up and down but it does work correctly when it hits the slider on the device. No issues with functionality at all this is a really great case.
Click to expand...
Click to collapse
I tried crashguard on op6 and hated it. I think I'll like the solid suit better. Thanks for the pics. Screen protector is intriguing also, seems very clear....
Thankfully I waited I can get the print backs now. Just waiting or one particular one to be available
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
how slick is the screen protector compared to the pre-applied plastic one from OP?
gregwee said:
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
Click to expand...
Click to collapse
Sorry about the late response I'm traveling abroad. I have the impact screen protector as the tempered glass one is for the back I think. Anyway, as far as not full coverage I think what they mean is that it covers the visible screen but not the edges past that. It doesn't extend fully top to bottom either but it does cover all the visible screen space as far as I can tell; no obvious cutoff of the screen though it does require precise placement to line it up properly.
Frankenscript said:
how slick is the screen protector compared to the pre-applied plastic one from OP?
Click to expand...
Click to collapse
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Can u take better pictures of the screen protector again?
AlkaliV2 said:
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Click to expand...
Click to collapse
The impact resistance shatters? I thought it was some type of plastic film.
https://imgur.com/a/BJD1GmC
I also purchased a SolidSuit (with the lens mount) for my 6T and while I like the build material, I don't like the little details. Let me explain:
1) The back of the case has this weird look and feel like it's made from three separate medium-fiber density board with a black sticker over it. I can actually feel the transitions between the three pieces and I don't like it. See the attached picture.
2) There is a noticeable gap at the top of the phone where the back meets the bumper edge. However, on the bottom, it's completely flush. My pockets are clean, but somehow dust and small particles find its way into that tiny gap. Ugh,
3) The special lens adapter is amazing since I am now able to mount the Moment 18mm WIDE V2 lens. However, since the bayonet mount sits so far away from the camera lens, it creates vignetting. FYI: The OP6T and the OP6 share the same lens adapter. I bought both. They are labeled differently, but they are identical in every way: height, mounting point, etc. If they did this correctly, the adapter for the OP6T should be SHORTER since it does NOT have the same camera height protrusion as the oneplus 6.
https://imgur.com/a/BJD1GmC
zymphad said:
The impact resistance shatters? I thought it was some type of plastic film.
Click to expand...
Click to collapse
It didn't shatter really, it just cracked along a seam where the impact was. When I get back home in two days I'll try to get pictures of the crack and the screen protector.
Ultimate Shield Tempered 9H Glass screen protector
Hey guys, here is my review of the Ultimate Shield Tempered 9H Glass screen protector and I must say - I'm converted!!
Read on....(also see the attached pictures)
Contents:
- The tempered glass screen protector
- Screen cleaning cloth (wet)
- Dust stickers
- Microfiber cloth
Installation:
Be sure to do this in as dust-free environment as possible. I like the kitchen for this reason (no carpets for me there), or the bathroom works great too as you can use the steam from the shower to help any dust settle whilst you complete the install!
1. Using the wet cloth helps to give the screen a good clean removing any oily fingerprints and/or dirt.
2. The dry cloth dries the screen (don't worry, the wet cloth doesn't 'wet' it that much!) and the dust stickers are there to ensure any last little bits of dust aren't present.
You'll want to spend time on ensuring there are no little bits on your screen as this can spoil the look, at least to those who won't be able to stop noticing that little eyelash hair in the middle of the screen!
3. Carefully remove the protective layer of the screen protector, keeping the exposed glass side facing down. There is a slight adhesive, of some form, which any bit of dust/hair ending up there may be tricky to remove so make this step as swift as possible, taking extra care. Keep your thumbs/fingers away from that side of the glass to avoid any fingerprints getting stuck there, holding the protector by the side only.
4. Lower the screen protector towards your phone, but don't place it on quite yet. Really line up the protector, looking at it from directly above and I'd recommend using the camera cut out as the guide. Ensure the selfie-camera lines up nicely in the hole but also that the full length of the protector runs parallel to the phone.
5. Once you're happy with the alignment, place the protector on the screen, with the selfie-cam side down first, then slowly but firmly lowering the rest of the screen protector down. Or to say another way, press the top of the screen protector down and then press towards the lower end of the protector, until you reach the bottom speaker end.
6. Some bubbles may be trapped underneath the screen. Don't worry! Use your finger/thumbs to firmly yet carefully press out the bubbles, pressing it out toward's the edge of the screen. You can also wrap a credit card in the dry cloth, and use that as a way to force out some air bubbles.
If you're not happy with the alignment and/or have anything stuck under there, then it is possible to remove and reapply. Do this very carefully though, by using your nail to lift it up from the corner, taking extra care not to fingerprint that side of the protector. Use the dust sticker to remove any bits. Though again, be as quick as possible as whilst that side of the protector is exposed, more stuff might land there!
Impressions:
From being a long time user of the film screen protectors, those being 'wet installed' etc. I must say I have been converted! I did have my hesitations about using glass protection, as a while back I used one and it failed to impress me. Previously I had found this type of material, glass vs plastic film, would add a mirror-like reflection to the screen, even more so than the Gorilla Glass screen that the device already had. Also, with my love of AMOLED devices I found glass screen protectors would detract from the 'deep black' the screen would display, and make such colours more of a grey, which affected viewing pleasure.
But not with this one!!
Feel - I instantly fell in love with how this looked and felt. It has no loss of sensitivity and I have not felt the need to have to swipe harder or change the way I interact with the phone. It feels just as responsive as it did prior to installation!
Looks - There is no glare/mirroring effect and so as far as it's looks are concerned, it's practically invisible! The screen colours look as vibrant as they did before and blacks still look as deep as they did
Fit - As you can see I have this installed with this rugged case and it fits PERFECTLY. This case slightly lips over and so there is no dust being trapped around the edge of the screen protector. I'd presume it will also be compatible with other cases too, as it is full coverage, going right to the edges with it's own bezel, not just covering the screen.
I highly recommend the use of this screen protector, for the added peace of mind that the screen is further protected against scratches etc.
Any questions please do ask!
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Sent from my OnePlus 5T using XDA Labs
tbv2005 said:
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Click to expand...
Click to collapse
Thanks! To be honest I don't think it does. I've just looked at various apps, such as matlog/play store etc and no noticeable screen cut off
cd993 said:
Thanks! To be honest I don't think it does. I've just looked at various apps, such as matlog/play store etc and no noticeable screen cut off
Click to expand...
Click to collapse
Thanks, I maybe give that one a try then . Just to make clear for everybody. The app in the pic I attached in my former screenshot really starts at pixel 0 on the left side... It's really not a lot what's missing....
tbv2005 said:
Thanks, I maybe give that one a try then . Just to make clear for everybody. The app in the pic I attached in my former screenshot really starts at pixel 0 on the left side... It's really not a lot what's missing....
Click to expand...
Click to collapse
Do so, you'll like it!
thanks
Thanks for the review mate!! I've used US's products before and I think they're the best screen protector I've ever used.
Ordered mine 2 days ago and can't wait for it to be delivered, I miss the sensitivity and feel that those usually have.
rvstico said:
Thanks for the review mate!! I've used US's products before and I think they're the best screen protector I've ever used.
Ordered mine 2 days ago and can't wait for it to be delivered, I miss the sensitivity and feel that those usually have.
Click to expand...
Click to collapse
Enjoy!
Would love to get one but ... it seems they don't ship to Mexico and that's a shame :c .-.....
PriPhaze said:
Would love to get one but ... it seems they don't ship to Mexico and that's a shame :c .-.....
Click to expand...
Click to collapse
Email them, perhaps they'd be willing to...
I have applied this protector too....
Always had phones without screenprotector because I hate them... It takes away the feel of the phone... Bubbels underneath glass etc etc.
Bought it because I saw some scratches on the screen coming.
So after this positive review gave it a try. But man I must say it's a great quality.
Applying is very easy off course look for dust... Becaue I had one.... Took it off which is very easy to do... Rinsed it off under water....
Take two was a succes.... Didn't dry it just putt it on the phone and wipe wipe wipe and a lot of patience....and rubbing. It was bubble free.
But glad I did it.... In fact I find the screen better looking.. Bit of 3d effect...
Fp and typing is as normal.
Only con its a bit heavy....
Don't compare this to a 5 dollar screenprotector which is also the reason why I hated them.
*justintime* said:
I have applied this protector too....
Always had phones without screenprotector because I hate them... It takes away the feel of the phone... Bubbels underneath glass etc etc.
Bought it because I saw some scratches on the screen coming.
So after this positive review gave it a try. But man I must say it's a great quality.
Applying is very easy off course look for dust... Becaue I had one.... Took it off which is very easy to do... Rinsed it off under water....
Take two was a succes.... Didn't dry it just putt it on the phone and wipe wipe wipe andota of patience....
But glad I did it.... In fact I find the screen better looking.. Bit of 3d effect...
Fp and typing is as normal.
Only con its a bit heavy....
Click to expand...
Click to collapse
Glad you like it! Yeah it really is a great screen protector, basically looks the exact same with it on and barely noticeable!
tbv2005 said:
@cd993 thanks for the nice review. I also normally don't like the complete glas, but bought a similar one. I'm also quite happy with it except one thing which disturbs me a little bit. Mine has the black frame around it ( which is in itself not a problem) and this is taking away just a tiny bit from the screen (maybe half a millimeter on the left and right). Is it the same with your one ( from the pics it looks like it also has the black frame). That it take away a bit of the screen is only noticeable when using apps which really starting text completely on the left side ( like the netguard log for example )
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
Is your screen protector from spigen?
thanks.
I'm using a chinese version but have some issues. The protector have some kind of bend and it causes a bubble impossible to remove just in the front camera. Because of that my front cam don't focus right.
That's the one:
https://www.aliexpress.com/item/32982692897.html
@cd993 from the pictures you attached it seems the screen protector has real curved edges. Am I right or is just my impression? If you could add more pictures where we can see how curved are the edges without the case, I would appreciate.
I'm looking for a good screen protector that has curved edges so I can use a slim cover.
Currently I have a Cafele full screen protector (bought on AliExpress for 4 USD), which is good and has a nice feeling, looks very similar to this one, but it doesn't have curved edges and because of that it doesn't stick very well in the corners, if I use a slim case.
Thanks.
silmarx said:
@cd993 from the pictures you attached it seems the screen protector has real curved edges. Am I right or is just my impression? If you could add more pictures where we can see how curved are the edges without the case, I would appreciate.
I'm looking for a good screen protector that has curved edges so I can use a slim cover.
Currently I have a Cafele full screen protector (bought on AliExpress for 4 USD), which is good and has a nice feeling, looks very similar to this one, but it doesn't have curved edges and because of that it doesn't stick very well in the corners, if I use a slim case.
Thanks.
Click to expand...
Click to collapse
Apologies, I no longer have this phone!
cd993 said:
Apologies, I no longer have this phone!
Click to expand...
Click to collapse
But can you tell me if you recall if the edges were really curved?
silmarx said:
But can you tell me if you recall if the edges were really curved?
Click to expand...
Click to collapse
Hmm I remember then being curved yes, but no overly so.
Either way I certainly recommend it and fitted it great, as well as being case friendly, in my experience
cd993 said:
Apologies, I no longer have this phone!
Click to expand...
Click to collapse
Hey what's that?? What do you have now?
*justintime* said:
Hey what's that?? What do you have now?
Click to expand...
Click to collapse
Ha! I went for the Oneplus 7 Pro
cd993 said:
Ha! I went for the Oneplus 7 Pro
Click to expand...
Click to collapse
Ghehehe good luck with it. [emoji106]