heloo sir i am new to this forum and my problem is that my samsung gt-b5512 stucks at white screen during booting when i press the power button
this happens due to wrong firmware flashing of another galaxy y model and after then when i flashed it with the right firmware files of b5512 this below message occurs .so sir please help me because i know you can
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> PDA_B5512JPLA3_REV00.tar.md5 is valid.
<OSM> MODEM_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> GT-B5512-MULTI-CSC-OJPLA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Related
What happened:
last night I was working late while reading WhatsApp groups messages from time to time. I noticed the battery reached ~30% then decided to charge the phone. Few minutes later, all of sudden Samsung logo appeared, I thought it was restarting but it keeps freezing on that screen.
What I noticed:
1. Few minutes before it died, I noticed the performance was poor.
I disabled "power saving" to unleash the processor and see what happen.
my S3 looked as if it was gaining some power then losing it. this is when I decided to leave it charging. I spent many years troubleshooting PCs, I'm new to PDAs but I felt that there's big thing happening and the phone will show that sooner or later!
2. I can't access recovery mode. Only download mode is accessible.
3. in download mode, product name is empty
What I did so far:
I'm trying to flash with stock I9300XXELLA, I have (bootloader, PDA, MODEM & CSC)
I used two different releases of Odin:
1. Odin v3.04 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 2564)
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
w/out (re-partition)
he error is (There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
2. Odin v3.07 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
w/out re-partition:
(There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm newb to this, I appreciate your help.
try this.. i dont know if it ll work ...
download this file http://checkrom.com/threads/resurrec...%84%A2-v4.896/
get into odin and flash this file into your phone through the download mode ... if everything works it should boot into cwm recovery .. then wipe data\factory reset , wipe cache , wipe dalvik cache and reboot ... wait 15 mins and it should work!! Good Luck!
@galaxys3lover : I'm trying this now.
What I did so far:
after the PIT partition error. I downloaded the PIT file of 16GB SGS3.
Started flashing with Odin with re-partition selected. It stucks on "Get PIT mapping.."
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
I searched about the error on the fourms and found many members say it's better to use odin on windows XP, so I installed windows XP on VMware and tried flushing ,, however I still get the same error.
@galaxys3lover
not working, same errors. it looks like sudden death
I have same issue with two of SG3 devices, it's sucks
My nephew has the same issue, but he's not rooted.
Sent from my GT-I9300 using xda app-developers app
if flashing the stock ROM and pit file fails, the only option is to replace the motherboard. that's all there is to it
I only flashed this PDA file:
I9300XXEMA2
Where can I find the CSC and or pit files?
on sammobile
Had Same Exact problem, waiting for someone good reply... desperately.. tried every thing to do with odin no lock pit file error.. don't really want to go to service center.. waiting for some genius xda users guide
heloo sir i am new to this forum and my problem is that my samsung gt-b5512 stucks at white screen during booting when i press the power button
this happens due to wrong firmware flashing of another galaxy y model and after then when i flashed it with the right firmware files of b5512 this below message occurs .so sir please help me because i know you can
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> PDA_B5512JPLA3_REV00.tar.md5 is valid.
<OSM> MODEM_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> GT-B5512-MULTI-CSC-OJPLA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
viouseds was
please anybody help me
Hi,
I've got a question about the Samsung Galaxy S3 (i9300). Before this issue it was completely original (not rooted or anything like that).
A few dags ago the phone didn't start. The battery was full (of course), the Samsung logo (with the device type etc, not the animated logo) appeared but it did nothing else. I've waited a long time, and still nothing has happened. So I Googled a lot on many sites on how to fix this problem.
I ended up with the solution 'Flash the stock ROM', so I went to sammobile (and later to samsung-updates.com) to find the original stock ROM, created by Samsung.
I found it, and tried to flash it (I put the phone in download mode (device info in the left upper corner), and the downloadmode is enabled, and I received a notification in Odin (I tried v1.85 and I'm using v3.09 right now) that says 'Added'.
This stock ROM (flashing-process) didn't work so I kept on Googling and found some solutions. I've downloaded custom ROM's and tried to download ClockworkMod recovery (I wanted to install this so I could wipe the phone and reinstall the stock ROM). Unfortunatly it didn't work.
This is the error that I get from Odin (when trying to flash the Stock ROM):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNL1_I9300ZTOUGNK2_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Erase...
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried to install CWM Recovery with Odin, but I ended up with another error (as you can see in the PNG file that I uploaded with this thread).
Can anyone help me with restoring this phone to factory settings (and stock ROM)?
Thanks in advance!
Explanation for the screenshots (uploaded to this thread):
screen1.png: different files that I tried since the first ones didn't work (PIT files, ROM'S and CWM Recovery).
screen2.png: attempt to flash Stock ROM.
screen3.png: error after flashing Stock ROM.
screen4.png attempt to install CWM Recovery.
Seems, that you must rebuild your partitions. Look here.
rp158 said:
Seems, that you must rebuild your partitions. Look here.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance!
CB95 said:
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Thanks in advance!
Click to expand...
Click to collapse
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
tallman43 said:
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
Click to expand...
Click to collapse
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
CB95 said:
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
Click to expand...
Click to collapse
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
tallman43 said:
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
Click to expand...
Click to collapse
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
CB95 said:
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
Click to expand...
Click to collapse
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
tallman43 said:
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
Click to expand...
Click to collapse
Thanks for your reply.
I tried to flash it with Odin 1.85, and I got the following error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I tried to flash the firmware version 4.1.3, I got this error (Odin 1.85):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So it looks like I should contact a repair center.
Anyway, thank you all for your replies and help, I appreciate it!
I have an 10.1v, which is unlocked and rooted and has been running on isis rom. I haven´t used it for about one year and now wanted to flash the cyanogenmod. Because I haven´t used it for so long, I started with a factory whipe.
But since then my 10.1v is stuck in a bootloop. I still can get into download mode so I tried to flash the stockrom via odin... Odin is checking the files and this is what happens:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_P7100BUKC8.tar.md5 is valid.
<OSM> PDA_SIGNED_HRI83_BUKDF.tar.md5 is valid.
<OSM> MODEM_HRI83_BUKDF_REV_03.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
so nothing acutally is flashed and I don´t know why... anybody who can help me? Thank you!
Hi,
This device has the android stock rom (don't know which version) and the stock recovery.
Tried to flash it via odin but no hope, always getting FAIL message. tried all versions of ODIN, even with PIT file, but same results.
Could it be a hadware issue (NAND defective ?).
Any help appreciated.
What caused the bootloop? What part of the flash is it failing on? Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
es0tericcha0s said:
What caused the bootloop?
Click to expand...
Click to collapse
Don't know (device belongs to a friend, he said a virus caused the bootloop-not right IMO-)
es0tericcha0s said:
What part of the flash is it failing on?
Click to expand...
Click to collapse
Odin3 v1.83 - v3.04 :
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> Complete(Write) operation failed.
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 v3.07 - v3.10:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Removed!!
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
es0tericcha0s said:
Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
Click to expand...
Click to collapse
So I must try with every available firmware out there ?
Firmware used:
GT-S5690_XXKL1_XXKL1_PROKL1_home (Includes: (Bootloader, CSC, PDA, Phone) Files)
gt-s5690_xxld3_xxld3_neekk8_home (Includes: (CSC, PDA, Phone) Files)
gt-s5690_xxlg3_xxlg3_dbtlf1_home (Includes: (CSC, PDA, Phone) Files)
Stock Recovery:
E:failed to mount /data (Invalid argument)
-- Applying Multi-CSC --
Note: even a hard reset does nothing (obviously).
Any solutions guys