Hi
Have a chinese tablet.
After installing "CWM" and installing "CYANBOOK" , got "Encryption unsuccessful"
I also mention that can not find any way to get in Fastboot nor Key combination & adb commands.
So the only way to install ROM is using "LiveSuitPack" [Power-off tablet, Press VOL - , Insert usb cable] then it start to rewrite ROM.img
❂ All drivers installed for USB (android device) ===> adb devices ---Detected ---> 20080411 Device
I did install Android_2.3.4_20111224.img & Android_4.0.3-base1.0_ctp.img via LiveSuitPack They seems work but Touch Screen does not work and i can not use the device.
And also sun4i_crane_evb-h975_5x0x_0308_0308.img which after passing that icecream logo i stuck in Isolated Alert Triangle Sign and can not pass through.
And en-us-NEW2-ak003.img [official allwiner A10 (white) ROM] no sign of life after boot logo !
★Stock working ROM was from CRANE and was android 4...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
► Some info that i found about this tablet by opening back lead
① Allwinner A10 (CPU)
② ST-M720-v1.2 (On Borad)
③ 20120807 T=1.0MM (On Board)
④ FY015H21-3.5K-A05 FB-D121-02 (Above Barcode)
⑤ FY-70H21P01 (Connection Flat)
► Specify
• 7" capacitive touch screen
• Resolution: 800x480
• Front cam only
• 2D motion sensor for automatic orientation
✖ HINT: in the user manual the model mentioned as HS-7DTB2-4GB BUT its 8 GB internal memory
• 512 rom
• Internal 8 GB
• External (Available)
✔ Could please some one help me to get proper ROM.img for this tablet ? Thanks alot for your time to read this
azithro said:
Hi
Have a chinese tablet.
After installing "CWM" and installing "CYANBOOK" , got "Encryption unsuccessful"
I also mention that can not find any way to get in Fastboot nor Key combination & adb commands.
So the only way to install ROM is using "LiveSuitPack" [Power-off tablet, Press VOL - , Insert usb cable] then it start to rewrite ROM.img
❂ All drivers installed for USB (android device) ===> adb devices ---Detected ---> 20080411 Device
I did install Android_2.3.4_20111224.img & Android_4.0.3-base1.0_ctp.img via LiveSuitPack They seems work but Touch Screen does not work and i can not use the device.
And also sun4i_crane_evb-h975_5x0x_0308_0308.img which after passing that icecream logo i stuck in Isolated Alert Triangle Sign and can not pass through.
And en-us-NEW2-ak003.img [official allwiner A10 (white) ROM] no sign of life after boot logo !
★Stock working ROM was from CRANE and was android 4...
View attachment 2192879
View attachment 2192880
► Some info that i found about this tablet by opening back lead
① Allwinner A10 (CPU)
② ST-M720-v1.2 (On Borad)
③ 20120807 T=1.0MM (On Board)
④ FY015H21-3.5K-A05 FB-D121-02 (Above Barcode)
⑤ FY-70H21P01 (Connection Flat)
► Specify
• 7" capacitive touch screen
• Resolution: 800x480
• Front cam only
• 2D motion sensor for automatic orientation
✖ HINT: in the user manual the model mentioned as HS-7DTB2-4GB BUT its 8 GB internal memory
• 512 rom
• Internal 8 GB
• External (Available)
✔ Could please some one help me to get proper ROM.iso for this tablet ? Thanks alot for your time to read this
Click to expand...
Click to collapse
I found this Rom From AIRPAD 97F2-D1-H1-H01-1714.20120307.img works fine except Rotation and Front cam. (CPU heat up)
Any help?
How did u find a version of cwm that was compatible with ur tablet. I have a similar issue with a tablet I bought for my daughter called "The Meep".
Sent from my HTC6435LVW using xda premium
MeepTablet CWM
NinjaPerv said:
How did u find a version of cwm that was compatible with your tablet. I have a similar issue with a tablet I bought for my daughter called "The Meep".
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
First off all, you are asking a Question on my Question , you need to start a new Q in Question section.
BTW.
Your Tablets Specs:
CPU: 1.0GHz Cortex A8
RAM: 512
Screen size: 7 inch
resolution :800x480
Storage: 4GB internal + SD card slot
G Sensor = yes
▲WARNING: Try this at your own risk, if you don't know what your doing
__________________________________
DOWNLOAD : ClockWorkMod for Cortex a8
__________________________________
.
azithro said:
First off all, you are asking a Question on my Question , you need to start a new Q in Question section.
BTW.
Your Tablets Specs:
CPU: 1.0GHz Cortex A8
RAM: 512
Screen size: 7 inch
resolution :800x480
Storage: 4GB internal + SD card slot
G Sensor = yes
▲WARNING: Try this at your own risk, if you don't know what your doing
__________________________________
DOWNLOAD : ClockWorkMod for Cortex a8
__________________________________
.
Click to expand...
Click to collapse
Ur right, I did ask a question on ur question. Not sure the problem with that considering the nature of the question I asked. If I would have asked a question that had absolutely nothing to do with ur topic then I could see why ud say that. So u know, myself and a handful of other people have been posting question after question after question regarding this tablet with no answers at all. I saw ur topic and that u secceasfully managed to flash a working recovery on a similar unknown tablet so I had to ask how u did it. Thank u for the response. I'm gonna give that version of cwm a shot and see wut happens.
On a side note, how do I get 1080p hd on my original Motorola droid and can someone walk me thru the steps to make it waterproof? Thanks!
Sent from my HTC6435LVW using xda premium
NinjaPerv said:
1-How do I get 1080p hd on my original Motorola droid and
2-Can someone walk me thru the steps to make it waterproof?
Click to expand...
Click to collapse
1- Turn off the encryption and the phone will go through a security boot cycle.
You will see so reduce resolution warning back, when you chose to encrypt data.
After the boot, go back to the camera and check the options and now you have 1080p recording option back.
2-Use or buy iOttie Waterproof Skin Case from any shop or Amazon ( ORDER ONLINE )
Touché touché. Ok then.... how do I install android 4.3 jellybean on my Super Nintendo? Once that's done, how do I root it and flash a custom recovery? Ur move
Sent from my HTC6435LVW using XDA Premium 4 mobile app
NinjaPerv said:
Touché touché. Ok then.... how do I install android 4.3 jellybean on my Super Nintendo? Once that's done, how do I root it and flash a custom recovery? Ur move
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Dude you keep asking your Question in my topic, Plz open a new Q , and then ask your question.
Homemade rom port for Meep!
hello my friends, i have a modified rom of LY-F1 with meep! kernel, and modules. Script.bin and init.sun4i.rc are modified.
No bugs.
Wifi...........ok
Touch........ok
Sound.......ok
Cam..........ok
Hdmi.........ok
Gsensor....ok
The image burn with livesuit.
The forum does not let me put links of my rom :crying:
In youtube search: Meep! Oregon scientific ported ROM (LY-F1)
Sorry my bad english, i am spanish.
unknown tablet
hello sir ,
I use oplus xonpad 7 tablet i want custome room but i cant find my phone in xda list can you help me please i want custome rom for my tablet
I have recently bought OPlus XONPAD 7 tablet, I want to get root access to allow some app. Is there any way for this?
Bro...use fram root 1.5.3 to root u r device..first install framroot 1.5.3 and install super user frm play store and root u r device..i did the same thing...works 100%..dont forget 2 thank me
Sent from my oplus xonpad 7 using XDA Free mobile app
sachinm said:
I have recently bought OPlus XONPAD 7 tablet, I want to get root access to allow some app. Is there any way for this?
Click to expand...
Click to collapse
Try KingRoot app
Related
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
platinumlayer said:
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
Click to expand...
Click to collapse
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Wilton said:
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Click to expand...
Click to collapse
Hey buddy, i am from brazil too
Did you solved this problem?
I have one tablet of this in my home and i would try to change its rom
General Thread For LG Optimus L4 II E440 E445
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD WILL INCLUDE BUT NOT LIMIT TO :1. DESCRIPTION
Thanks to www.GSMARENA.com
Code:
GENERAL 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
SIM Yes
Announced 2013, June
Status Available. Released 2013, July
BODY Dimensions 112.5 x 64.7 x 11.9 mm (4.43 x 2.55 x 0.47 in)
Weight 125 g (4.41 oz)
DISPLAY Type IPS LCD capacitive touchscreen, 16M colors
Size 320 x 480 pixels, 3.8 inches (~152 ppi pixel density)
Multitouch Yes
SOUND Alert types Vibration, MP3 ringtones
Loudspeaker Yes
3.5mm jack Yes
MEMORY Card slot microSD, up to 32 GB
Internal 4 GB, 512 MB RAM
DATA GPRS Class 12 (4+1/3+2/2+3/1+4 slots), 32 - 48 kbps
EDGE Class 12
Speed HSDPA, 7.2 Mbps; HSUPA, 5.76 Mbps
WLAN Wi-Fi 802.11 b/g/n, Wi-Fi Direct, Wi-Fi hotspot
Bluetooth Yes, v3.0 with A2DP, HS
USB Yes, microUSB v2.0
CAMERA Primary 3.15 MP, 2048 x 1536 pixels, LED flash
Features Geo-tagging
Video Yes, [email protected]
Secondary No
FEATURES OS Android OS, v4.1.2 (Jelly Bean)
Chipset Mediatek MT6575
CPU 1 GHz Cortex-A9
GPU PowerVR SGX531
Sensors Accelerometer, proximity, compass
Messaging SMS (threaded view), MMS, Email, Push Email, IM
Browser HTML
Radio FM radio
GPS Yes, with A-GPS support
Java Yes, via Java MIDP emulator
Colors Black, White
- SNS integration
- Xvid/MP4/H.264/H.263/WMV player
- MP3/WAV/WMA/eAAC+ player
- Google Search, Maps, Gmail
- YouTube, Google Talk
- Document viewer
- Photo viewer
- Organizer
- Voice memo
- Predictive text input
BATTERY Type Li-Ion
Capacity 1700 mAh
Stand-by Up to 600 h
Talk time Up to 12 h 30 min
MISC SAR EU 0.64 W/kg (head)
0.60 W/kg (body)
2. WINDOWS ROOTING GUIDE
*this guide will work on most android phones
Download THIS PROGRAM (VROOT)
Install Program
Enable USB Debugging in settings (TICK CHECK-BOX IN Settings>>>Developer options>>>USB debugging){Opciones de desarrollador USB ON}
Plug your phone to PC using usb cable in "LG software" / "debug" mode
If you are connecting your phone to your pc for the first time you need to install lg drivers from first autorun when phone plugged in ( If autorun disabled navigate to lg removable drive and run LGAutoRun.exe) follow on-screen instructions or download drivers from LG Official Website HERE
Ensure all drivers have installed correctly (no yellow triangles in "Device Manager")
Run VROOT As Administrator On PC
program will connect to your phone and tell you your phone model and if phone is rooted (obviously our's is not)
Click ROOT in right bottom corner
program will install Chinese sync/managment app (you can remove app later) on your phone and install Kinguser superuser app on your phone (you can replace this with your favourite superuser app <i kept Kinguser and i'm happy>)
Your phone will reboot when completed
3. BOOTLOADER UNLOCK
NOT YET :/
4. CUSTOM RECOVERY
LBL (Locked Bootloader) Recovery from LG L5 II Works
FILES AND INSTRUCTIONS FOUND HERE
5. MOD's
TheMysteryouseHAS PORTED AROMA CUSTOM STOCK PACKAGE BY Slipsystem
ALL INFO FOUND HERE
*ALPHA STATE ON THIS DEVICE !!!!
make sure to backup before flash
Speria_LG_L4_II_E440.zip
MIRROR
PLEASE RUN THIS TOOL AND UPLOAD RESULTS THIS TOOL TO HELP US PORT FOR YOUR DEVCE'S (dual's and such)
*link will be back up soon
please run THIS to provide us with list of files from your phone to complete the debloat from unwanted system apps
6. ROM's
NOT YET :/
7. GENERAL FAQ
Tags:
@jp1296 @gorankx
@sasays
@smartuser001
@sospeed
@teoesdios
@Paul!us @dodo333 @blubbiblubbkekz
@nasko_spasko @cyberangel22k
@TheMysteryouse
@slipsystem
@kimerika
X. Just a Tip
IF someone is pissed off like me when you plug your phone to usb and have to click 3 times before phone connects
1. DIAL 3845#*440# or 445
2. UN-CHECK BOX IN: "Settings">>>"Auto run">>>"AutoRun Enable"
3. Reboot (not sure if necessary but i did)
NO MORE CHECKING FOR DRIVERS / SKIP EVERY-TIME YOU PLUG YOUR PHONE IN
RESERVE
it might get FAT
DOES ANYONE FIND THE TIP USEFUL ?
Even though I was gone for a while, I'm still working on the bootloader. Expect updates from me.
Nice, Iggy
This is gonna be a loooong post. Though, I was checking the VRoot part, and change the part of putting it in "LG Software" mode, to "Debug" mode. Only takes it if you are debugging, and have to do that with the phone disconnected from the pc, in Development options (sorry, I have it in spanish "Opciones de desarrollador")
--------------------------------------------------------------------------
done
teoesdios said:
Nice, Iggy
This is gonna be a loooong post. Though, I was checking the VRoot part, and change the part of putting it in "LG Software" mode, to "Debug" mode. Only takes it if you are debugging, and have to do that with the phone disconnected from the pc, in Development options (sorry, I have it in spanish "Opciones de desarrollador")
--------------------------------------------------------------------------
Click to expand...
Click to collapse
i mentioned to enable usb debugging before the lg software part
IGGYVIP said:
i mentioned to enable usb debugging before the lg software part
Click to expand...
Click to collapse
Hahaha no need to spanish it xD But nice!
New we need us some CRoms and mods >.<
updating
teoesdios said:
Hahaha no need to spanish it xD But nice!
New we need us some CRoms and mods >.<
Click to expand...
Click to collapse
wait 10 minutes
Edit :
UPDATED #1
MOD SECTION
Check this out it might work
SLIMSYSTEM V2.3 JORDAN
CHOOSE L5 II VERSION
DO NOT USE THE SYSTEMUI MOD
IF YOU USE CUSTOM LAUNCHER YOU MIGHT NOT BE ABLE TO CHANGE WALLPAPER
IGGYVIP said:
wait 10 minutes
Edit :
UPDATED #1
MOD SECTION
Click to expand...
Click to collapse
Downloading! Also, the PorTool link isn't working again xD I think you deleted it by mistake
EDIT: Nope, and my WIFI doesn't work anymore xD I can't turn it on.
I don't see any changes nor displaying in the About section of the options. It just resets it to factory.
teoesdios said:
Downloading! Also, the PorTool link isn't working again xD I think you deleted it by mistake
Click to expand...
Click to collapse
while you on the stock please run the tool to give us filelist.txt
this will help complete debloat and make compatibile but can be done only when on stock
the link forport will be back up tomorrow
Hmm
teoesdios said:
EDIT: Nope, and my WIFI doesn't work anymore xD I can't turn it on.
I don't see any changes nor displaying in the About section of the options. It just resets it to factory.
Click to expand...
Click to collapse
mysteryouse was succesfull maybe package corrupted
try the mirror that's the one he sent me
hmm wifi is common bug on the L5 II was it always ok before ?
if it was please upload your system backup maybe there is a way to fix on yours and L5 II
IGGYVIP said:
mysteryouse was succesfull maybe package corrupted
try the mirror that's the one he sent me
hmm wifi is common bug on the L5 II was it always ok before ?
if it was please upload your system backup maybe there is a way to fix on yours and L5 II
Click to expand...
Click to collapse
Let me back it up, and upload it ^^
EDIT 1: WIFI Worked weird. I could only connect to the wifi I set on the Setup at the start. If I tried to connect to another, like when going to the mall or at work, it would reset my phone.
are you back on stock ?
teoesdios said:
Let me back it up, and upload it ^^
EDIT 1: WIFI Worked weird. I could only connect to the wifi I set on the Setup at the start. If I tried to connect to another, like when going to the mall or at work, it would reset my phone.
Click to expand...
Click to collapse
is so please run the filelist tool
and please backup /system and upload
IGGYVIP said:
is so please run the filelist tool
and please backup /system and upload
Click to expand...
Click to collapse
The whole /system folder? XD It's like 900mb :S Let me see if I can compress it a little bit.
And which filelist tool? ._.
Uploading /system folder (got it half compressed 2 times xD)
teoesdios said:
The whole /system folder? XD It's like 900mb :S Let me see if I can compress it a little bit.
And which filelist tool? ._.
Uploading /system folder (got it half compressed 2 times xD)
Click to expand...
Click to collapse
https://www.dropbox.com/s/meo7a7lzh8ghfco/filelistpull.zip
Here's my system folder: https://onedrive.live.com/redir?resid=BCE3841943B1AED1!6966
And my FileList file: https://onedrive.live.com/redir?resid=BCE3841943B1AED1!6967
WARNING
When i ported the mod to the LG L4 i selected wipe system.WHAT EVER YOU DO DON'T PRESS WIPE SYSTEM BECAUSE IT IS GOING TO WIPE THE LG SYSTEM.UI
----------------------------------------------------
Does anyone know how to extract the .kdz file for the L4? If anyone know pls tell me bcs i want to port something to the phone ( no spoilers ^_^ )
Any development? My internet went down since this morning and couldn't start working until now xD
Question: Do any of you have a working base to work? Doesn't matter what change do I do, I still get (Status 0).
Halo people. Nice to see that there is hope to our device. Maybe some developer have idea how to get CM to our device. Great work all of you!
Sent from my LG-E440 using XDA Premium 4 mobile app
Do any of you have a working base rom?
Hi all, I have a D101 10.1in phablet that I bricked.
I do have a backup for SP flash Tool but when I try to boot, I get to the splash screen with Decrypt failed, Boot Error!!!
I bricked by using files from another tablet files same model because get error after busy box installation and try a clean installation
I have tried formatting it... and put my old backup just to fix the problem but after the 1 situation get "Decrypt failed, Boot Error!!!"
When I format it. It seems to work because there is nothing at all when I try to boot it.
When I flash the backup I get the splash screen again... (So it's alive... well barely)
here are the details of the phablet:
- MODEL : d101
- MANUFACTURER : alps
- VERSION : 4.2.2 > JELLYBEAN
- PRODUCT NAME : d101
- DISPLAY ID : ALPS.JB3.MP.V1
- BOARD : d101
- MTK PLATFORM : MT6572
- BUILD ID : JDQ39
- BUILD VERSION : vCC01C
- PDA : vCC01C
- UDISK LABEL : vCC01C
- SERIAL NO. : 0123456789ABCDEF
In the Attach Files i give you guys the boot.img lk.bin logo.bin preloader.bin recovery.img secro.bin uboot.img and MT6572_Android_scatter.txt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oficial info
pecifications:
General
Operating System - Android 4.2
CPU - MT Cortex A7 Dual-Core
Processor Speed - 1.2GHz
RAM - 1G
Hard Drive Capacity - 8GB
Extended Memory - Support external TF card extend up to 32GB
Gravity Sensor - Yes, 4-dimensional G-sensor
Flash Player - Yes, Support Flash Player 11.0
Click to expand...
Click to collapse
Display
Display Size - 10.1 Inch
Display Technology - Capacitive Touch Screen
Multi-Touch - Yes, 5 points
Display Resolution - 1024 x 600 pixels
Click to expand...
Click to collapse
Camera
Front Camera - 0.3MP
Rear Camera - 2.0MP
Click to expand...
Click to collapse
Connections
Wi-Fi - Yes, Wi-Fi 802.11 b/g/n
3G - Yes, Support external USB 3G modem
GPS - Yes
Bluetooth - Yes, Bluetooth 4.0
Click to expand...
Click to collapse
Telephone - Yes,
2G:GSM850/900/1800/1900MHz
3G:WCDMA850/2100MHz
Click to expand...
Click to collapse
Input/Output Connectors
Ports
1 x Micro USB Interface
1 x Earphone Jack
1 x TF Card Slot
2 x SIM Card Slot
Audio/Video - 3.5mm headphone jack
Built-in stereo loud speaker
Built-in microphone
Battery
Battery Capacity - 4200mAh
Power Adapter
Input 100-240V~50/60HZ / Output 5V 2A
Color - White
Dimensions(L x W x H) - 243 x 165.8 x 10mm
Net Weight - 513g
Accessories
1 x Power Adapter, 1 x OTG Cable
Click to expand...
Click to collapse
You solved this problem? I have the same
Sadly no fix yet
Rebelation said:
Sadly no fix yet
Click to expand...
Click to collapse
I stubbornly looking for a solution to this problem
same problem here
i face the same problem in my XTOUCH PF81 tablet .
lets check some conditions :
what the type of flashing tool you used ?
is the boot file used extension .mpn or .img ??
did you used the correct project number ? (incase of wiselink tool)
1. SP_Flash_Tool_v3.1344.0.212 or SP_Flash_Tool_v3.1316.0.150
2. img
3 How to understand the project number?
Try the wiselink flash tool 4.1 , i think your tablet project number is td710
Where we can Check that project number
check this
Rebelation said:
Where we can Check that project number
Click to expand...
Click to collapse
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
at the opening of writes (incorrect scatter file format)
Probably need another scatter
muhammad sadiq said:
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
Click to expand...
Click to collapse
neoxlam said:
at the opening of writes (incorrect scatter file format)
Probably need another scatter
Click to expand...
Click to collapse
just change it from scatter.txt to scatter.sca , and remeber to remove the tick from force high speed , duel core need the full speed option .
wiselink update necessary?
neoxlam said:
wiselink update necessary?
Click to expand...
Click to collapse
no , for me the new version not work , i used 4.1 and didnt accept update , after install its will ask to install drivers update , i think you are already have the preloader drivers so disregard it .
Well that make flash but still the problem did you fix your tab with that flash tool?
Tried in different ways, the error persists
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
I suggested that the need to find a test point on the board. With its aid, you can unlock preloader, but I do not know how to find a test point
Rebelation said:
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
Click to expand...
Click to collapse
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
muhammad sadiq said:
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
Click to expand...
Click to collapse
the problem of wipe or not comes when the system start and this is not the problem of "Decrypt failed, Boot Error!!!"
when you have that problem of wipe you get stuck on logo loop and this is not the problem
this is before system starts because he don't recognize charging nothing because dont recognize the nothing
this problem is about decryption system tree is like lost key to decrypt the files and participation´s
imagine like Linux if you encrypt the files of the system with key and if your system loses that key don't recognize so the system you need put key again or format and install again new fresh
all d101 tablets are the same no mather what seller or logo comes on the tab all are the sam matherboard all are fake mtk6582 some come with android 4.4 but also a fake is just clone rom of 4.2 this tablet are great tablets for normal users for us we like root and install all **** and make or own system this tab is s **** because the system comes encrypet when we try do something broken the encrypt system
we have just 4 options
1 Find the point of the encryption point on the bootloaders and make skip that verification
2 find away to get the encryption key and place it again
3 make a new and fresh undecrypt android system installation
4 put this tablet on the trash and buy new one
i agree with the last option
4 put this tablet on the trash and buy new one
hahahahaha:good:
New ZOPO Speed Series Octa-Core is Arriving on the Market
ZOPO Speed 7 and 7 Plus 5.5 inch 4G LTE Android 5.1 lollipop
The Zopo Company In the Mobile World Congress in Shanghai
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
will announce the new Products: New MTK 6753 Octa-Core 64bit
Zopo Speed 7 :
- 5.0 Inch FHD Screen
- MTK6753 Octa Core
- 3GB RAM + 16GB ROM
- 13 MP Back Camera + 5 MP Front Camera
- Android 5.1 System
- 2500mAh
Zopo Speed 7 Plus:
- 5.5 Inch FHD Screen
- MTK6753 Octa Core
- 3GB RAM + 16GB ROM
- 13 MP Back Camera + 5 MP Front Camera
- Android 5.1 System
- 3000mAh
Everybody are Welcome!
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Photos Section
In all those photos are shown the new product and the details of the phone !
Not be considered spam or advertising is shown only to understand the difference and the details.
Software section
Drivers
http://www.4shared.com/rar/THPrHzDxce/USB_VCOM_Driver.html
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html
http://www.4shared.com/zip/dSb69w17/Copy_of_Driver.html
http://www.4shared.com/rar/qM8hDW5u/zopo_usb_drivers.html
http://ge.tt/2yL21VT/v/2
Firmware
http://global.zopomobile.com/?p=1
Recovery Modded
Cwm Base no touch
https://copy.com/Of0epSHxRkpwoJkX
Flashtool V.5.1516
Flashtool V.5.1444
Version ONLY for Mtk 67xx
http://www.4shared.com/rar/AU4kSVORce/SP_Flash_Tool_exe_Windows_v514.html
Utility section
Drivers Installation :
Procedure :
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way (the COM port may be different)
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the confusion and installed it different,
to solve, you can try to use the program
usbdeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC.
Installation of the Firmware:
PROCEDURE
1) Setup new Firmware
To download the new firmware.
Unzip the compressed file and insert into the firmware folder:
a) recovery modded (is necessary for receive right root)
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.
Root section
This is the right thread:
http://forum.xda-developers.com/speed-7-plus/general/how-to-root-speed-7-speed-7-plus-t3192377
Video section
Official
Antutu video test Benchmark
Video review
In all those videos are shown the new product and the details of the phone !
Not to be considered spam or advertising is shown only to understand the difference and the details.
Reserved 1 (under construction thread)
ghost45 said:
Reserved 1 (under construction thread)
Click to expand...
Click to collapse
Hi, do you have buy this phone ? I don't know zopo and i want buy this. What you think ?
Updated the first page ...soon all the procedure to have right root!
Thankssss.
Before I buy Zopo Speed 7 plus please clarify one thing because I'm confused. On the package it says clearly MTK6753 Octa Core 1.5 Ghz, but in one review on YouTube antutu shows a 1.3.
Please what is the truth? Is it 1.5 or 1.3?
Does this phone have nfc?
t-ph said:
Does this phone have nfc?
Click to expand...
Click to collapse
No
NefilEx said:
Before I buy Zopo Speed 7 plus please clarify one thing because I'm confused. On the package it says clearly MTK6753 Octa Core 1.5 Ghz, but in one review on YouTube antutu shows a 1.3.
Please what is the truth? Is it 1.5 or 1.3?
Click to expand...
Click to collapse
I just got a response from ZOPO.
ZOPO 7 speed plus is MTK6753 Octa Core 1.5 Ghz. :good:
Zopo Speed 7 Plus arrived today 25/08
I can only say that it is definitely above my expectations! :laugh:
Congratulations Zopo
Now we hope in a good future for this device!
I wish everyone a good job, for future developments ...
pikka68 said:
I can only say that it is definitely above my expectations! :laugh:
Congratulations Zopo
Now we hope in a good future for this device!
I wish everyone a good job, for future developments ...
Click to expand...
Click to collapse
I ordered my yesterday from EU warehouses. How long have you been waiting for the delivery of package?
NefilEx said:
I ordered my yesterday from EU warehouses. How long have you been waiting for the delivery of packag?
Click to expand...
Click to collapse
I have buy one too from geekbuying
Near the 10 Sept i will have it
I'm thinking about getting this phone (the 5" version) too. If you have any interesting findings or even would be willing to write a review, please share it here.
I had a lot of problems with Chinese phones and compass, please check it too. I believe the GPS will be OK. And usually the rest used to be good at Zopo except of SW.
javlada said:
I'm thinking about getting this phone (the 5" version) too. If you have any interesting findings or even would be willing to write a review, please share it here.
I had a lot of problems with Chinese phones and compass, please check it too. I believe the GPS will be OK. And usually the rest used to be good at Zopo except of SW.
Click to expand...
Click to collapse
I had purchased in order to pre Zopo Italy, last month.
For now I have installed a firmware upgrade (OTA)
Imported address book, and various data from the old device, installed apps that I use often with my tablet.
It is used today, without noticing any particular problem.
It has good overall speed, and a good camera.
Obviously for me it was a big jump, because I just left an old Nokia C6.
Thanks to karl, we already have a working Meizu Flyme OS for Speed 7/ Speed 7 Plus
http://www.zopomobile.com/forum/viewtopic.php?f=24&t=15485
Hi everyone i recently bought an X96Q tv box with the allwinner H313 proc. 2GB/16GB rom Android 10.
I am not pleased with its stock rom. to many lags, if i link my G acc and make the updates all the apps stop working or crashes. the netflix app is ancient but its the only thing that is working so i'm searching for something alternative like a LineageOS or anyother. i installed the atv launcher but it still sucks cause of the rom....
i searched everywhere for a h313 compatible rom but with no luck. Is there anyone that could help me?
Thanks in advance
@speedakis your post is fairly new if the purchase is the same send it back. I saw a review comparing that chipset against the H616 saying the latter fixed many of the overheating issues present in the x96. if it's still possible send it back.
unless a dev buys a box and makes it a personal project I don't think we'll see custom roms or a recovery. these aren't popular enough devices to have attracted support.
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
after upgrade storage become only 4.7GB.
Help me please
maras77 said:
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
View attachment 5152035
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
Click to expand...
Click to collapse
I do the su
and
reboot efex,
but after I can't flash on PhoenixSuit because it is not detected on that mode.
What should I do?
EDIT: I've managed with PhoenixUSBPro
The same thing has happened to me, the image works but it does not have root, several attempts by adb if it has a su file, but it is not operational and the entire image is denied access.
Well with the magisk manager application I have got root and adb fastboot NDK module.
Hi, Im a newbie here. I have this TV box x96Q_max_ pro and I want to know how to root this device. TIA.
kiklox said:
Well with the magisk manager application I have got root and adb fastboot NDK module.
Click to expand...
Click to collapse
How to root with the magisk manager?
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
can anybody help me how to do a shortcurt in this motherboard?
Is it able to change the launcher and manage some apps with the custom rom ????
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
jw1982 said:
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
Click to expand...
Click to collapse
Can i get the rom
jw1982 said:
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
Click to expand...
Click to collapse
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
almeidadpx said:
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
Click to expand...
Click to collapse
Frol where did you get the rom please??
Shiinooda said:
Frol where did you get the rom please??
Click to expand...
Click to collapse
rom is no comment from maras77
do i need to run adb command or installing directly through the phoenix will run? can you say?
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
mestre01 said:
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
Click to expand...
Click to collapse
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
almeidadpx said:
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
Click to expand...
Click to collapse
Well obviously on Tanix website is an "official rom" with no root. The rom in the thread is rooted. With PhoenixSuit_V1.10 you can upgrade the rom without formatting which is a plus.