Got a s4 today, followed the root guide here, using mdk pre release kernel. Did not unlock the boot loader. Loaded hyperdrive and after loading everything did the reboot. left me at the black samsung screen with an unlocked padlock and custom underneath. i can get into recovery and download. but no matter what i do will not progress screens (even tried full cache, dalvic, system, and data wipe and reloaded Hyperdrive. same results)
Should i re flash back to stock and try the entire process over again? if so, links please
also, what did i do to soft brick my phone? for future avoidance
and whats the difference between mdk and me7?
You probably got a bad download of the rom. Its a good idea to verify the md5 after its been downloaded. Once you can get a good download of the rom you dont need to odin back you can flash the rom in recovery and youll be good to go. The me7 ota is the newest firmware, has a few nice changes but it also has a non exploitable boot loader so you cant run a custom recovery on it.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
You probably got a bad download of the rom. Its a good idea to verify the md5 after its been downloaded. Once you can get a good download of the rom you dont need to odin back you can flash the rom in recovery and youll be good to go. The me7 ota is the newest firmware, has a few nice changes but it also has a non exploitable boot loader so you cant run a custom recovery on it.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
To clarify, your suggesting re downloading rls8, and try flashing that. Then, if that doesn't work, re flash the stock kernel (basically go through the Odin root guide again?)
Thanks!
Redownload rls8 verify the md5 checksum to make sure its not another bad download and then flash. As long as you can get into custom recovery of your choice and the download is good theres no reaaon it shouldnt work.
Sent from my SCH-I545 using Tapatalk 2
correct md5sum, same results.
both odin'd kernels have no effect, same boot problem. anyone know a fix?
Hopefully someone will. Same problem. Putting my phone back to stock rooted MDK works. The minute I try to flash Hyperdrive 8 and 8.1, it boots fine, then hangs on a restart.
Atleast, Will verizon exchange the phone seeing this?
Your mistake, why should Verizon replace something you caused.
Did you make a nandroid of the stock Rom prior to flashing?
Sent from my SCH-I545 using Tapatalk 4
Addiso said:
Your mistake, why should Verizon replace something you caused.
Did you make a nandroid of the stock Rom prior to flashing?
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
and yet no one has yet been able to pinpoint what mistake i made in installing a rom i've used for 12 months (s3) and installing a new version on a new phone while following every instruction to the letter, suddenly ****s on me. so please, enlighten me, what mistake did i make?
You didn't make a mistake. Chances are, you just used the wrong recovery. I spent 7 hours last night trying to fix my phone. I factory reset this morning to the stock MDK and re-rooted and figured out how to use ADB to install the Clockwork Mod Recovery. It's difficult to get started and figure out how to install and use it, but there are resources out there that will help you figure it out. I reinstalled the new 8.1 Hyperdrive with CWM recovery and was delighted when the ROM actually rebooted without fuss. It did hang on the Custom unlock screen long enough to make me nervous though. Figure out ADB and add CWM. It will work.
Edit for your steps: Reinstall the stock MDK with Odin. Reroot as per the instructions in the MDK root thread. Instead of TWRP, use CWM Recovery (which isn't nearly as easy), then reinstall the latest Hyperdrive (or whatever you were trying to install).
Related
So I was pretty determined to get Cm 10.1 running on my Galaxy Note 2 for Verizon. Before hand, I was using TWRP to do all my ROM flashings but when I tried to use CM 10.1, I was told I must use CWM for it to work properly.
Here's my issue, I tried using CWM but it kept on giving me an error and after searching for awhile, it said its because I'm trying to use TWRP instead of CWM. So I flashed CWM and it gave me the same error. Tried both Touch and regular, downgraded and upgraded to the latest CWM but still same error. So I said **** it and installed the lastest TWRP. Then all the ROMs that were giving me issues started to install flawlessly. Then I went to CWM and it gave me the same error.
Am I doing something wrong when I flash CWM? I tried both Odin and APP Update way and both with same results. After using TWRP for awhile, I actually am starting to like the CWM Touch a lot better and I want to switch but not if its going to be giving me problems every flash.
Any insight would be helpful,
and as always to everyone on this forum, thanks
Just make sure you are using the latest version of TWRP 2.5 and you will be fine. You also may need to re-download your ROM file.
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
wythyntime said:
Well I am, in a way, stuck using the TWRP right now but I would like to know if I can actually change it to CWM. And if so, how would I go about doing that? because flashing the CWM alone isn't doing anything for me.
Click to expand...
Click to collapse
That is the way I have always gone about getting CWM on my phone back when I wanted it. I would just flash over TWRP in TWRP and then reboot system and then reboot back into recovery and it would always be CWM. If it doesnt work for you that way then see if they have a Odin tar and if so follow the instructions to flash it in Odin. They may not have an Odin flashable though, its been a long time since I have used it and on a different phone so....
Sent from my SCH-I605 using XDA Premium HD app
Let me actually rephrase this. (My bad for any confusion)
So if I try to flash a rom using TWRP, it goes through without any issues, even the CM rom. But when I flash CWM and try flashing, it gives me the getdevice-"(t0vzwte)"-not exact".. When researching, I was kept on told its because it is running TWRP. I tell them its CWM and they told me to update my CWM. I actually like CWM a bit better, idk why. but I was just trying to get my phone 100% the way I want it.
Hello, I am new to the forum, but I am not new to rooting. I switched from the Droid Razr Maxx to the Galaxy S4, and so far I have loved my GS4. I am updated fully to android 4.2.2 baseband I545VRUAME7. I was able to root my phone using the SD Card method as published on Saturday, July 27 2013. Upon rooting my phone I attempted to install custom recovery in order to install the Eclipse S4GE v1.4 ROM made by nitroglycerine33. I downloaded Goomanager and installed TWRP. Upon telling TWRP to flash the custom ROM it rebooted the phone, as usual. After reboot i was put into Odin. I tried this process 4 times with no avail, continuously booting into Odin. After trying TWRP, I tried Clockworkmod and the same happened to me. I am unable to get anything other than Odin, and I really hate TouchWiz and want to switch to this ROM. Thanks for any help.
DaringVirus52 said:
Hello, I am new to the forum, but I am not new to rooting. I switched from the Droid Razr Maxx to the Galaxy S4, and so far I have loved my GS4. I am updated fully to android 4.2.2 baseband I545VRUAME7. I was able to root my phone using the SD Card method as published on Saturday, July 27 2013. Upon rooting my phone I attempted to install custom recovery in order to install the Eclipse S4GE v1.4 ROM made by nitroglycerine33. I downloaded Goomanager and installed TWRP. Upon telling TWRP to flash the custom ROM it rebooted the phone, as usual. After reboot i was put into Odin. I tried this process 4 times with no avail, continuously booting into Odin. After trying TWRP, I tried Clockworkmod and the same happened to me. I am unable to get anything other than Odin, and I really hate TouchWiz and want to switch to this ROM. Thanks for any help.
Click to expand...
Click to collapse
You cant flash roms on the new update, you can only root.
With rooted ME7, we do not have the capability (yet!) to install custom roms or recoveries. See the thread on the bounty about this.
resurektz said:
You cant flash roms on the new update, you can only root.
Click to expand...
Click to collapse
Why is that, and is there a way to downgrade the Baseband now that I am rooted, as I said before I do not like TouchWiz.
DaringVirus52 said:
Why is that, and is there a way to downgrade the Baseband now that I am rooted, as I said before I do not like TouchWiz.
Click to expand...
Click to collapse
What's your build number? If it ends with ME7 the best you can do is root (for now).
Is there a way to downgrade, or a reason as to why we cannot install custom ROMs?
Me7 blocks older versions of the firmware so no downgrading. You cant install a custom recovery because me7 patched the loki exploit. Once on the me7 ota youre stuck, for now atleast.
Sent from my SCH-I545 using Tapatalk 2
Thanks, keep me updated as to when we can install custom ROMs.
No problem.
Sent from my SCH-I545 using Tapatalk 2
DaringVirus52 said:
Hello, I am new to the forum, but I am not new to rooting. I switched from the Droid Razr Maxx to the Galaxy S4, and so far I have loved my GS4. I am updated fully to android 4.2.2 baseband I545VRUAME7. I was able to root my phone using the SD Card method as published on Saturday, July 27 2013. Upon rooting my phone I attempted to install custom recovery in order to install the Eclipse S4GE v1.4 ROM made by nitroglycerine33. I downloaded Goomanager and installed TWRP. Upon telling TWRP to flash the custom ROM it rebooted the phone, as usual. After reboot i was put into Odin. I tried this process 4 times with no avail, continuously booting into Odin. After trying TWRP, I tried Clockworkmod and the same happened to me. I am unable to get anything other than Odin, and I really hate TouchWiz and want to switch to this ROM. Thanks for any help.
Click to expand...
Click to collapse
You, my friend, are SOL for now
I got tired of waiting & ordered a Dev edition w/unlocked bootloader.
Sent from my Galaxy Nexus using Tapatalk 2
wtherrell said:
You, my friend, are SOL for now
I got tired of waiting & ordered a Dev edition w/unlocked bootloader.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
im still surprised nobody has been able to port the dev edition bootloader over and figure out how to unlock it.
but yes OP, you are screwed. start liking TW
dansan382 said:
im still surprised nobody has been able to port the dev edition bootloader over and figure out how to unlock it.
but yes OP, you are screwed. start liking TW
Click to expand...
Click to collapse
To port it over, the stock bootloader must first be unlocked. You can't overwrite the locked bootloader
najaboy said:
To port it over, the stock bootloader must first be unlocked. You can't overwrite the locked bootloader
Click to expand...
Click to collapse
obviously.. what i should have wrote was,
surprised nobody is able to compare and contrast the 2 bootloaders, find out whats different and examine a way to release that block. which im pretty sure what they have been trying.
basically it should be the same bootloader, one locked and one unlocked. find out how the lock is there and whats different
Is there any way to get out of the Odin mode when you attempt to reboot to recovery on ME7 using TWRP? Is it possible to flash back to the stock ROM?
You cant flash a custom recovery on the me7 ota. Turn your phone off and use the odin/download mode key combo. When it asks if u want continue decline and your phone will boot normally. Me7 images flashable via odin are in the dev section.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
You cant flash a custom recovery on the me7 ota. Turn your phone off and use the odin/download mode key combo. When it asks if u want continue decline and your phone will boot normally. Me7 images flashable via odin are in the dev section.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Got it thanks a ton! I'll read up in the dev section. I really wish there were step by steps for noobies out there that are a bit more clear. I've googled and seen so many links to forums and threads. I thought I found a pretty straight forward method, but that one didn't work. I'm not giving up!
Regards,
Tony
blkst2x said:
Is there any way to get out of the Odin mode when you attempt to reboot to recovery on ME7 using TWRP? Is it possible to flash back to the stock ROM?
Click to expand...
Click to collapse
You're not using TWRP if you updated to ME7. You have the stock recovery and are on the stock rom. There is no going back to MDK.
Sent from my Nexus 7 using Tapatalk 4
najaboy said:
You're not using TWRP if you updated to ME7. You have the stock recovery and are on the stock rom. There is no going back to MDK.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Unfortunately I have figured that one out. So, is there any way to install one of the ROMs posted by Dubbsy? I was under the impression that these worked with ME7, but I must be very wrong in that assumption. Forgive my ignorance. I'm just really sick of TouchWiz and I can't wait to get a clean Android install on this device.
No you cant install any rom as of yet on me7. The me7 roms in the dev section are an me7 base with mdk files so you can retain ability to flash a custom recovery and flash other roms. As for your pm shut your phone all the way off and then hold volume down + power. Release power when it vibrates keep holding vol down and itll ask for you to confirm or deny booting to download mode. If you deny it your phone should boot normally. Everytime you boot I believe itll do this so youll eventually need to use one of the me7 odin images. There is no wipe versions in the dev section so you wont lose any apps and data associated with them.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
No you cant install any rom as of yet on me7. The me7 roms in the dev section are an me7 base with mdk files so you can retain ability to flash a custom recovery and flash other roms. As for your pm shut your phone all the way off and then hold volume down + power. Release power when it vibrates keep holding vol down and itll ask for you to confirm or deny booting to download mode. If you deny it your phone should boot normally. Everytime you boot I believe itll do this so youll eventually need to use one of the me7 odin images. There is no wipe versions in the dev section so you wont lose any apps and data associated with them.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
after doing that procedure once, it let's me boot up fine. Powering off, then on, reboot, or batter pull..they all work fine now. How would I install one of the ME7 Odin images? Is there a doc on how to do that using Odin?
Hey guys, I need help.
I consider myself fairly adept at handling rooted devices, but I have not been following development for the GS4 for the last several months and have been running the last release of Synergy before their hiatus.
I was going to try out something different. I always enjoyed Beanstown's Jelly 'Beans', and thought I would try Build 7.
Now I am stuck at the Samsug Galaxy Boot Logo and it never goes to the Custom Boot Screen.
WORSE...I managed to break my recovery...so it will not boot their either.
Only mode I can boot to is Download.
Maybe I am just blind but I searched and could not find any Odin flashable recoveries...does anyone have one? Is there a rooted MDK file out there that I can flash via Odin?
Someone please help
Did you do the proper wipes when flashing the new rom? There arent any odin flashable recoveries for the s4. I would probably use the no wipe mdk image to recover (wont lose any user data) since you have no custom recovery to flash something with. Youll have to start over but youll have a working phone at least.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Yes...I always wipe well when I am flashing. Almost every problem I have ever had going back to the Droid 1 was from a Dirty Wipe. I also tried searching for issues and warnings before moving forward...but did not find anything with my searches.
So just to be sure I have this right...start with this
http://forum.xda-developers.com/showthread.php?t=2301259&highlight=mdk
Then re-root as I did originally
http://forum.xda-developers.com/showthread.php?t=2290798
Then I can reflash CWM Recovery from Rom Manager? Will it automatically flash loki'd version?
Finally once there...can I just flash Beantown's Jelly Beans Build 7 or do I need to update the radios first? Can I use the just the MJ7 modem from the post below or do I need other parts updated too?
http://forum.xda-developers.com/showthread.php?t=2487298
Thanks all!
jbg25 said:
Yes...I always wipe well when I am flashing. Almost every problem I have ever had going back to the Droid 1 was from a Dirty Wipe. I also tried searching for issues and warnings before moving forward...but did not find anything with my searches.
So just to be sure I have this right...start with this
http://forum.xda-developers.com/showthread.php?t=2301259&highlight=mdk
Then re-root as I did originally
http://forum.xda-developers.com/showthread.php?t=2290798
Then I can reflash CWM Recovery from Rom Manager? Will it automatically flash loki'd version?
Finally once there...can I just flash Beantown's Jelly Beans Build 7 or do I need to update the radios first? Can I use the just the MJ7 modem from the post below or do I need other parts updated too?
http://forum.xda-developers.com/showthread.php?t=2487298
Thanks all!
Click to expand...
Click to collapse
Yeah looks like you got everything in order. Rom manager or rom toolbox will auto loki the recoveries. No need to update radios when flashing beans either. Itll already have the radios included unless your wanting to flash the mj7 radio seperately then I believe youll be ok doing that. I havent done alot of reading on the newest radios.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Back up and running with stock rooted MDK and CWM Recovery.
Now to try and flash a ROM.
jbg25 said:
Back up and running with stock rooted MDK and CWM Recovery.
Now to try and flash a ROM.
Click to expand...
Click to collapse
good deal just saw your pm was gonna say flash mdk odin but it looks like you found it
beanstown106 said:
good deal just saw your pm was gonna say flash mdk odin but it looks like you found it
Click to expand...
Click to collapse
Thanks for getting back to me! :good:
I am up and running...but with but not with 'Beans' Build 7 ... I have tried everything...and no matter what it stalls at the SGS4 Splash Screen and never progresses.
I thought maybe it was the new recovery I flashed ( CWM Touch Recovery 6.0.4.4) .... BUT I got Hyperdrive to install and boot. So maybe my SGS4 just doesn't like Beans...which sucks cause I ran that almost exclusively on my SGS3.
jbg25 said:
Thanks for getting back to me! :good:
I am up and running...but with but not with 'Beans' Build 7 ... I have tried everything...and no matter what it stalls at the SGS4 Splash Screen and never progresses.
I thought maybe it was the new recovery I flashed ( CWM Touch Recovery 6.0.4.4) .... BUT I got Hyperdrive to install and boot. So maybe my SGS4 just doesn't like Beans...which sucks cause I ran that almost exclusively on my SGS3.
Click to expand...
Click to collapse
Try TWRP 2.5.0.2.
Most of the devs use it.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Try TWRP 2.5.0.2.
Most of the devs use it.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I downloaded and installed the latest TWRP 2.6.3.0 from DsLNeXuS's Recovery Tools App as Goo Manager is not finding a recovery for my device.
Still no good...nothing I do makes Beans Build 7 work ....
jbg25 said:
I downloaded and installed the latest TWRP 2.6.3.0 from DsLNeXuS's Recovery Tools App as Goo Manager is not finding a recovery for my device.
Still no good...nothing I do makes Beans Build 7 work ....
Click to expand...
Click to collapse
Go here. Get 2.5.0.2
http://techerrata.com/browse/twrp2/jfltevzw
Instructions
http://teamw.in/project/twrp2/181
At the bottom of the page.
Edit;
Or flash this in recovery
http://forum.xda-developers.com/showthread.php?p=45006486
I would reboot to recovery after flashing to make you got it on the right version.
Then make sure you can still boot back to your rom.
Then go back to recovery
Wipe
Factory reset.
Advanced
Check system, Data, davlik and cache
Wipe
Go back to main screen
Install
Fund your rom to flash.
Sent from my SCH-I545 using xda app-developers app
Me too. I tried the [ROM][TW4.3]STOCK-ROOTED-MJ7-AROMA-LOKI'd ROM with CWMR. Wiped Dalvik. Cache, Ractory Rest/Data. Seemed to install fine but then hung at "Custom". Fortunately I was able to a Nandroid Restore but not sure where this went wrong. Finally got TWRP to install after several failed GooManager attempts over the past month. May CWMR is the problem.
***first of All I'm only making a new thread because I haven't found my specific issue anywhere else (even though its a common issue)***
SO...I need some help with my S4 ASAP!! I recently flashed a new rom (Hyperdrive 16.1 the link is: http://forum.xda-developers.com/showthread.php?t=2301724), Wiped Data/Factory Reset, Wiped cache and dalvik cache. I also did the format data where you had to type in "yes." I did it all in TWRP. Then after using my phone for a few hours I decided to reboot it. Now its stuck in the Samsung "Custom" screen with the lock (unlocked icon).
I cannot seem to be able to go into recovery mode as well. I'm not sure what build version my phone uses, and since I can't boot the phone i don't know what to do. What do you recommend I do? I was also using android 4.4.2....
Should I Odin back to factory and then re root?
This video seems to be very useful, and I want to follow it but what should i do if I don't know the build?
https://www.youtube.com/watch?v=GL8XwuRYoWU
Thanks for youre help XDA,
Dany
Danylevy12 said:
***first of All I'm only making a new thread because I haven't found my specific issue anywhere else (even though its a common issue)***
SO...I need some help with my S4 ASAP!! I recently flashed a new rom (Hyperdrive 16.1 the link is: http://forum.xda-developers.com/showthread.php?t=2301724), Wiped Data/Factory Reset, Wiped cache and dalvik cache. I also did the format data where you had to type in "yes." I did it all in TWRP. Then after using my phone for a few hours I decided to reboot it. Now its stuck in the Samsung "Custom" screen with the lock (unlocked icon).
I cannot seem to be able to go into recovery mode as well. I'm not sure what build version my phone uses, and since I can't boot the phone i don't know what to do. What do you recommend I do? I was also using android 4.4.2....
Should I Odin back to factory and then re root?
This video seems to be very useful, and I want to follow it but what should i do if I don't know the build?
https://www.youtube.com/watch?v=GL8XwuRYoWU
Thanks for youre help XDA,
Dany
Click to expand...
Click to collapse
Were you using SafeStrap or TWRP... that may help with what build you were on since your not sure and if you were MDK you don't want to Odin a different firmware and lock your phone up.
If you don't know.. What other ROMs have you flashed successfully before? Have you flashed custom kernels before?
Or did you have to flash kernel modules when flashing TW ROMs...
HD 16.1 needs to be on either MDK or a SafeStrap with 4.4.2 base so most likely you were on 4.3 base is my guess until you provide more info.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Were you using SafeStrap or TWRP... that may help with what build you were on since your not sure and if you were MDK you don't want to Odin a different firmware and lock your phone up.
If you don't know.. What other ROMs have you flashed successfully before? Have you flashed custom kernels before?
Or did you have to flash kernel modules when flashing TW ROMs...
HD 16.1 needs to be on either MDK or a SafeStrap with 4.4.2 base so most likely you were on 4.3 base is my guess until you provide more info.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
So Unfortunately i did a big mistake. I didn't realize I was still using MDK, and then I used Odin to upgrade to NC5
1. Can i Odin (full wipe) to MDK, or too late?
2. If not, should I considering doing this downgrade http://forum.xda-developers.com/showthread.php?t=2720163 ??
Danylevy12 said:
So Unfortunately i did a big mistake. I didn't realize I was still using MDK, and then I used Odin to upgrade to NC5
1. Can i Odin (full wipe) to MDK, or too late?
2. If not, should I considering doing this downgrade http://forum.xda-developers.com/showthread.php?t=2720163 ??
Click to expand...
Click to collapse
Yikes !! That's too bad. I won't make you feel any worse lol
It is to late now. You can't go back to MDK
I'd say look for Surge's method on here. I have an MDK phone and have never done those methods but most seem to like his method. Up to you though.
Sent from my SCH-I545 using Tapatalk
Here's an easier method to get root on NC5, http://forum.xda-developers.com/showthread.php?t=2769480. Well more like a better explained one.
Sent from my OtterX running SlimKat
Poor guy updated an MDK phone... No it's not the end of the world.. Just a cell phone.. But that just plain sux!
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Poor guy updated an MDK phone... No it's not the end of the world.. Just a cell phone.. But that just plain sux!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
we see this happen as they dont really understand the rules of what can and can't be done with their phones. Unfortunate as we have a boatload of info in these forums that would them out,,,,,just need to take time to read first
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Leach0789 said:
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Click to expand...
Click to collapse
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
scrillakev said:
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
Click to expand...
Click to collapse
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Leach0789 said:
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Click to expand...
Click to collapse
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Leach0789 said:
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Click to expand...
Click to collapse
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Leach0789 said:
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Click to expand...
Click to collapse
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Leach0789 said:
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Click to expand...
Click to collapse
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Yup... Tulsa you're quick!! Lol
Grab the NC5 No Wipe...
Sent from my SCH-I545 using Tapatalk
Tulsadiver said:
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Thanks! You guys rock.