[ROM][P769] PenberRom5 [11/21/2013 - AROMA Edition) - LG Optimus L9 P760, P765, P768, P769

LeoLawliet presents..
- PenberRom5 -
Fine tuned and tweaked for better battery life, performance, smoothness, and responsiveness
This ROM is mainly based on PenberRom2, which I started working on at CM Forums.
To be honest the main difference between the two is PenberRom2 was based on PACman ICS 4.0.4, while PenberRom5 is based on PACman JB 4.3.
Other than that, the whole idea behind both ROMs is the same, a custom ROM based on my preference and what enhancements I use.
It's already tweaked and fine tuned, I saved you all the trouble of having to do it yourselves
Here's a list of what has been added:
Smart Launcher included
Replaced DSP Manager with ViPER4Android FX
Supercharged services.jar (launcher stays in memory + better multitasking)
boost in performance
swap2cache terminal script creates a 64mb swapfile in /cache with swappiness set to 40
swap2data terminal script creates a 128mb swapfile in /data with swappiness set to 40
increased responsiveness
better battery life
faster boot
zipalign apk's on boot
defrag databases on boot
entropy tweak
I/O scheduler tweaks
sleeper tweaks
hardware rendering tweaks
improved sdcard read/write speed
disables logger
disables journalism
disables vsync
ADJ tweaks
vm tweaks
ram tweaks
graphics rendering tweaks
video/music streaming tweaks
various useful terminal scripts (I'll mark those down)
custom bootanimation + UI sounds
increased jpeg + video recording quality
3D performance enhancement tweaks
call tweaks
scripts to clean database & zipalign apps
cpuramcheck script to monitor CPU/RAM usage in realtime using the terminal emulator
Stabilized FPS through a build.prop tweak (kinda risky, comment out if you have graphic glitches. Thanks LENAROX!!)
Click to expand...
Click to collapse
As usual, I will leave a disclaimer. I will NOT be held responsible if this causes any damage to your device,
you are responsible for making a nandroid backup in the case that a bootloop occurs.
Credit goes out to these guys
AntonX - for CM10.2 ROM
mateo1111 - for PACrom JB 4.3 ROM
twinnfamous - for porting PACrom JB 4.3 with everything fully working, it's the base ROM I'm using
Pizza_Dox - for gm & hc scripts, 02SDCardAccel, 97ramscript, 20vmlt, 82Sleepers, RNGD, Cache_Cleaner
ViPER520 and zhuhang - for ViPER4Android FX
Chainfire - for some scripts. 01-GPU_touchrender, libncurses.so
ImbaWind - for Adrenaline Boost script
Spex - for some build.prop edits and some code from his startup scripts, I started out with his collection of tweaks
zeppelinrox - for services.jar patcher & terminal scripts. [vac, zepalign]
LENAROX - you made the cpuramcheck script possible, and you are also responsible for 20vmlt. Thanks
The rest I honestly don't remember but if you feel that you deserve credit, message me and I will give you proper credit where it should be given.
kuma82 - for the 90kuma script & WiFi fix (only needed in older builds, twinnfamous fixed the bug)
artit - for AROMA Installer base setup
Click to expand...
Click to collapse
And once again because I can't tell you how annoying it is for someone to screw up their own device for not following instructions carefully and then blame someone else..
I will NOT be held responsible if this causes any damage to your device, you are responsible for making a nandroid backup in the case that a bootloop occurs.
Enjoy ​

Downloads
HOW TO INSTALL:​
Code:
* Download the Rom and Gapps
* Reboot to Recovery
* Wipe data/factory reset
* Wipe system
* Flash the ROM and then Gapps
* Reboot your phone
* Enjoy
____________________________________________________________________________________________​
HOW TO UPDATE:​
Code:
* Download the latest version
* Reboot to Recovery
* Wipe dalvik cache and cache
* Wipe system
* Flash the ROM and then Gapps
* Reboot your phone
* And enjoy the latest version of PAC
____________________________________________________________________________________________​
DOWNLOADS​
============================================================
ROM
============================================================​
Code:
[B][COLOR="Green"]11/21/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/9Rj"]Dev-Host[/URL] (Please use this mirror)
[B][COLOR="Green"]11/14/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/7z4"]Dev-Host[/URL] (Please use this mirror)
[B][COLOR="Green"]10/31/2013[/COLOR][/B]
[B]Mirror #1[/B]: [URL="http://d-h.st/6x1"]Dev-Host[/URL] (please use this mirror)
[B][COLOR="Green"]10/19/2013[/COLOR][/B]
[B]Mirror #1[/B]: [url="https://app.box.com/s/061mnjqso4p3g69ztj45"]Box[/url] (please use this mirror)
[B]Mirror #2[/B]: [URL="https://db.tt/DlWpG2oo"]Dropbox[/URL] (thanks DjSidEShoW)
============================================================
Google Apps & Add-ons
============================================================​
Code:
[B]Slim AROMA Gapps[/B]: Get it [URL="http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/383-addons/6370-slim-aroma-selectable-gapps-4-3-build-2"]here.[/URL]
Install what you want, you have that option now
[B]UltraSlim Gapps[/B]: [URL="http://d-h.st/users/ronin79/?fld_id=27074#files"]here[/URL].
Only 11mb, no extra clutter
[B]IRS Starter Pack[/B]: for ViPER4Android FX. Get the latest files [URL="http://forum.xda-developers.com/showthread.php?t=2216193"]here[/URL].
(optional)
[B]Google Home Add-on[/B]: Get it [URL="http://d-h.st/TJ8"]here[/URL].
I recommend you install Gapps first.
Click to expand...
Click to collapse

Misc./Discontinued
LeoLawliet presents..
- PenberEngine -
Tweaks for everyday use
These tweaks are already included in PenberRom5,
This is just for anyone who wishes to have the additional tweaks for a different device.
- Download -
10/06/2013
- build.prop tweaks -
Also included already, use on whatever ROM you like
Code:
### LeoLawliet's new tweaks 9/15/2013 ###
# Misc Tweaks
debug.gr.swapinterval=0
debug.performance.tuning=1
dev.pm.dyn_samplingrate=1
persist.adb.notify=0
persist.service.adb.enable=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
qemu.hw.mainkeys=0
ro.min_pointer_dur=1
ro.sec.proximity.delay=0
sys.mem.max_hidden_apps=15
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
# Unlocks Screen using Menu Button
ro.config.hw_menu_unlockscreen=true
# Kernel Tweaks
ro.kernel.checkjni=0
# Ram Tweaks
persist.sys.purgeable_assets=1
# Kills Loging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
# Media Streaming Optimizations
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Camera & Media Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=25
ro.media.codec_priority_for_thumb=so
# CM9 Tweaks
hwui.disable_vsync=true
hwui.render_dirty_regions=false
# Voice Optimization
ro.ril.enable.amr.wideband
# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ro.config.vc_call_steps=20
ro.telephony.call_ring.delay=0
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Google DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
# TCP Tweaks (might break WiFi)
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
# Wireless Conection Tweaks (might break WiFi)
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
# 3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
# 16BIT Support
debug.fb.rgb565=1
# 16BIT Transparency
persist.sys.use_16bpp_alpha=1
# Graphic Tweaks
ro.product.gpu.driver=1
debug.gr.swapinterval=0
# Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Better Touch Responsiveness
touch.presure.scale=0.001
# Dalvik Tweaks
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.dexopt-flags=m=y,v=n,o=n
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.execution-mode=int:jit
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dexopt-data-only=1
# Enable Qualcomm tile rendering (Hardware Rendering)
debug.enabletr=1
persist.sys.composition.type=gpu
# enable harware egl profile
debug.egl.profiler=1
# FPs Booster
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Graphic Optimization
debug.gr.numframebuffers=3
ro.min_pointer_dur=1
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# Nitro Lagg Nullifier
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# Pro-Tuned ADJ 1.2 by LENAROX.
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=4
ro.PERCEPTIBLE_APP_ADJ=3
ro.HEAVY_WEIGHT_APP_ADJ=2
ro.SECONDARY_SERVER_ADJ=1
ro.BACKUP_APP_ADJ=5
ro.HOME_APP_ADJ=6
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
#Ultimate Assassin Mode!
#ro.SECONDARY_SERVER_ADJ=15
#ro.HIDDEN_APP_MIN_ADJ=3
# Qualcomm Display Settings (Qualcomm devices ONLY!!)
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Rapid Boot Technology 1.1 (Reduces bootup time)
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
### End of LeoLawliet's new tweaks 9/15/2013 ###

any screenshots?

noob.gamer said:
any screenshots?
Click to expand...
Click to collapse
It's basically PACrom JB 4.2.2 but heavily modified. It looks exactly the same.
I still need to add the finishing touches before anything. I should have it done and uploaded within the next few hours.
Edit: Uploaded and posted, check the 2nd post.
Edit2: Don't download yet, it bootloops and I know why. I'll fix it right now.

Everything should be fixed now

New one still bootloops
Sent from my LG-P769 using xda app-developers app

I know, I'm working on it x__x
This is an older one I made but I didn't have time to test it.
http://d-h.st/9ju

Still needs work and my WiFi sucks, can't even upload anything :/
Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2

Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3
unn.

Unn113 said:
Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3
unn.
Click to expand...
Click to collapse
I did test it, I guess it's just having issues with the latest CM10.1 lol
My apologies guys, I'm gonna make this right. And glad you like the engine tweaks, yes you may use them but please link back to the engine post and give credit
These tweaks work 100% flawless on PenberRom5, I may just release that instead.
Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2

Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.
Edit: Annnndddd it works!!
Uploading at the moment.

leolawliet said:
Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.
Edit: Annnndddd it works!!
Uploading at the moment.
Click to expand...
Click to collapse
Tweaks work great. I added the build prop ones first and notice improvement in antutu. So I went ahead and flashed pender engine tweaks and that made it even better. I dont use no-frills CPU tuner because the port im running has performance app built in settings with overclocking options. This is great my pac4.3 port is running greater than before. And the sounds u added to the touch is cool. I havent tried the launcher yet. Thank you for these tweaks.

My last Benchmark score
By the way, ROM released
Sent from my LG-P769 running PenberRom5 using Tapatalk 2

Disabled logger, disables journalism? What are these?
Sent from my LG-P769 using Tapatalk 4

Disabled logger - You can't do a logcat. Disabled journalism - better ram management.
Sent from my p760 powered by CarbonROM 4.3.

Unn113 said:
Disabled logger - You can't do a logcat. Disabled journalism - better ram management.
Sent from my p760 powered by CarbonROM 4.3.
Click to expand...
Click to collapse
Exactly and both tweaks boost performance, I also recommend deleting the selinux init.d script for further increase in performance.

Looks like a good ROM with all those features... have you encountered any bugs or problems so far?
Also, your download link gives an error "The user hosting this content is out of bandwidth."

optimusl9 said:
Looks like a good ROM with all those features... have you encountered any bugs or problems so far?
Also, your download link gives an error "The user hosting this content is out of bandwidth."
Click to expand...
Click to collapse
That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark
Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2

leolawliet said:
That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark
Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2
Click to expand...
Click to collapse
Good to hear. Please excuse me while I try the painful, stabbing myself with a knife process of unlocking the bootloader on P769. Be right back... by tomorrow... I hope.

Related

What should I add to build.prop for new adreno libs?

Hi all,
I'm adding the new adreno libs to popdogs's Oxygen rom and I'm just wanting to know what exactly I should be adding to my build.prop.
On this thread: http://forum.xda-developers.com/showthread.php?t=1530411 it says to add the following to the build prop:
debug.sf.hw=1
debug.composition.type=gpu
ro.secure=0
windowsmgr.max_events_per_sec=280
debug.performance.tuning=1
video.accelerate.hw=1
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
persist.android.strictmode=0
ro.min_pointer_dur=1
I noticed the build.prop for a couple of custom roms (Talho, Moto Razr, etc) that already include the new adreno libs, this is what is there:
# adreno tweaks
debug.performance.tuning=1
video.accelerate.hw=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.secure=0
ro.debuggable=1
persist.service.adb.enable=1
persist.sys.shutdown.mode=hibernate
windowsmgr.support_rotation_270=true
debug.composition.type=gpu
windowsmgr.max_events_per_sec=400
dalvik.vm.verify-bytecode=false
iro.min_pointer_dur=1
What should I putting in the build.prop for the best performance?
Thanks : )
please read changelog of roms your goin to use. most custom roms already added new adreno drivers and edited build.prop. no point doing the same thing over again
Yep, I already read the changelog for Oxygen and didn't see anything about updated adreno libs and there isn't anything in the build.prop which points to any adreno tweaks. That's why I'm trying to do it myself
Edit: I only just noticed that there are two sets of newer adreno libs and the second build prop info I posted above is for the newest adreno libs. Nevermind

[Script | Tweaks]【 Liquid Performance™】16-7-2013.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Project consists of the build.prop tweaks, init.d tweaks and many other tweaks which are specially made for our Xperia devices after a complete research on various scripts and tweaks.
Almost each and every tweak is explained clearly by Spex in his Project fluid™ so the same explanation is being done here.
You can implement in your ROM build without my permission... just give me proper credits that's enough
Please give your valuable feedback.
​
Credits:
Spex
Jeeko
zeppelinrox
pikachu01
iONEx
LENAROX
smokin1337
Exit_Only
idcrisis
imbawind
slaid480
smokin1337
[email protected]
darky
devilpera64
lpy
totiadrenalin
lambgx02
doomlord
Hero
If i have forgot someone else please PM me will add your credits
​​
Please rate the thread a 5* if you feel my work is good enough and give me a Thanks​
Build.Prop Tweaks
BUILD.PROP​
Requirements:
A Rooted android device running Android 2.3 or above
Installation:
Method- I
1. Open "Root Explorer" and click the R/W
2. Go to /system/build.prop
3. Backup yout current build.prop
4. Long-press on Build.Prop and you’ll see a pop up
5. Text Editor
6. Type in those few line of words below into the last line of the text then save
7. reboot and enjoy
Method- II
1. Open "Root Explorer" and click R/W
2. Go to /system and copy build.prop to your sd card
3. Copy build.prop to your pc
4. Move build.prop again to /system and change permission
Tweaks:
Render using GPU and GPU Tweaks:
Code:
[SIZE="2"]
#enable harware egl profile
debug.egl.profiler=1
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0[/SIZE]
Media Quality:
Code:
[SIZE="2"]ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so[/SIZE]
Liquid Smooth Ui:
Code:
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
Noise Cancellation:
Code:
#Noise Cancellation Off
htc.audio.alt.enable=0
htc.audio.hac.enable=0
Sensor Sleep:
Code:
# For sensor sleep control
ro.ril.sensor.sleep.control=1
Unlock fps limit:
Code:
debug.egl.swapinterval=0
Qualcomm tweaks:
Code:
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
Screen Glitches fix:
Code:
debug.gr.numframebuffers=3
Disable debugging notify icon on statusbar:
Code:
persist.adb.notify=0
EHRPD Support :
Code:
ro.config.ehrpd=true
Disable boot animation for faster boot :
Code:
debug.sf.nobootanimation=1
3G network for speeding up :
Code:
ro.ril.set.mtu1472=1
Disable Logers (safe battery + performance gain)
Code:
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
Better scrolling responsiveness
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Touch tuning :
Code:
### Touch tuning ###
touch.presure.scale=0.001
System prop for tethering denied:
Code:
ro.tether.denied=false
Enable Hardware 3D :
Code:
hw3d.force=1
Phone will not wake up from hitting the volume rocker:
Code:
ro.config.hwfeature_wakeupkey=0
Unlock phone by menu key:
Code:
ro.config.hw_menu_unlockscreen=false
Save power while phone is in sleep mode:
Code:
ro.ril.disable.power.collapse=1
Better scrolling:
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Support for ipv4 and ipv6.:
Code:
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
Better battery life:
Code:
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
Bravia Engine:
Code:
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Xloud Engine:
Code:
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
media.xloud.enable=1
media.xloud.supported=true
More precisely incall volume control:
Code:
ro.config.vc_call_vol_steps=15
Increase overall scrool speed and enable rotation to 270 degree:
Code:
windowsmgr.max_events_per_sec=170
windowsmgr.support_rotation_270=true
Better signal reception:
Code:
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
Enable 16 BIT:
Code:
debug.fb.rgb565=1
VM tweak:
Code:
ro.vold.umsdirtyratio=20
Better in call voice quality:
Code:
ro.ril.enable.amr.wideband
Signal Tweaks:
Code:
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
net speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
Wireless Tweaks:
Code:
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
Google DNS Tweak -- fastest DNS service:
Code:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Website Bypass:
Code:
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
DalvikVM:
Code:
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
#Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
Launcher tweaks: Testers needed
Code:
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
Kernel Tweaks: (Should speed things up a bit)
Code:
# Disable error checking
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
Allow purging of assets (System can free more Ram when needed):
Code:
persist.sys.purgeable_assets=1
Disabling Strict mode:
Code:
# Disable strict mode checking
persist.android.strictmode=0
Disable WiFi calling for EU models:
Code:
ro.ril.enable.ganlite=0
Decrease dial out delay:
Code:
ro.telephony.call_ring.delay=0
ring.delay=0
Decrease time for screen off/on during call:
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
Makes streaming videos stream faster:
Code:
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
For quick boot mode:
Code:
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
Hide debuging icon from taskbar:
Code:
persist.adb.notify=0
persist.service.adb.enable=1
For the default value of aGPS:
Code:
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
Enable egl profiler - enable harware egl profile:
Code:
debug.egl.profiler=1
enable/disable data in roaming:
Code:
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
Script Tweaks
Special Thanks to @Jeeko bro for the PurePerformances™X | Golden Edition
One of the best scripts ever made on XDA
SCRIPTS​
Requirements:
rooted phone
android 2.3+ ( 4.0 recomended)
kernel/rom with init.d support
5mb free in system
busybox
NANDROID BACKUP!! thanks @shprakash bro for reminding
FEATURES:
Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery:
Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- parts of CrossBreeder (credits to dev)
- parts of Adrenaline Engine (credits to dev)
- PureGraphics HD
- V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
Don't have init.d tweaks in your ROM??
Well you can integrate them in your ROM by just clicking on this link : Integrate init.d tweaks!!
Thanks to @sidharth.gtm for providing the link and Ryuinferno for the init.d thread please click a THANKS for the dev!
DOWNLOADS:​
Install the stock version on your stock firmware or stock based ROM of your phone....
Download: PurePerformances™X
Uninstall: PurePerformances™X-Uninstaller
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
For CMx.x, Lewa Os, MIUI, etc Download:
PurePerformances™X_CM_Others.1.4.zip
Pleask click a thanks for @Jeeko for this awesome scripts​
Thread Open for commenting guys
BANNERS:
Code:
http://img855.imageshack.us/img855/3836/9h4o.png
Code:
http://img694.imageshack.us/img694/7223/1lbq.png
The thread is now open for commenting guys! Thanks @Spex for helping me always​​
wow, fantastic. will try now
Nice work aneel... Keep up the good work
Sent from my ST15i using xda app-developers app
Help wanted
Hey friend I am using [ROM][CM10.1 + SONY 4.2.2][ALL MDPI] JellyVanilla EX 4.1.Can I apply it to my rom?If yes,How do i do so.Can you please simplify the installation method you mentioned?Do i need to flash the tweak zip file i downloaded for CM.X.X. you attached.
Please help.I am not an expert.
Thanking you in advance
Regards,
Siddhesh:cyclops:
shprakash said:
Nice work aneel... Keep up the good work
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
Thanks alot bro.. :good:
Siddhesh Sapre said:
Hey friend I am using [ROM][CM10.1 + SONY 4.2.2][ALL MDPI] JellyVanilla EX 4.1.Can I apply it to my rom?If yes,How do i do so.Can you please simplify the installation method you mentioned?Do i need to flash the tweak zip file i downloaded for CM.X.X. you attached.
Please help.I am not an expert.
Thanking you in advance
Regards,
Siddhesh:cyclops:
Click to expand...
Click to collapse
since you are on CM 10.1.. download the zip for CM x.x and install via cwm bro thats it... but make sure that your ROM support init.d tweaks
Thanks for the work bro!
Sent from my WT19i using xda premium
good work dude . does this Update for Spex Thread or Completely Different ?
Xperia~Man said:
good work dude . does this Update for Spex Thread or Completely Different ?
Click to expand...
Click to collapse
Thanks man! did i say any where that it is a update of spex's thread?? lol just the thread "looks" match.. other than that its entirely different... from his "scripts" and yeah build prop might match because i've gathered almost 20-25 types of build.prop tweaks and posted the best out of the best tweaks for our devices...
Aneel said:
Thanks man! did i say any where that it is a update of spex's thread?? lol just the thread "looks" match.. other than that its entirely different... from his "scripts" and yeah build prop might match because i've gathered almost 20-25 types of build.prop tweaks and posted the best out of the best tweaks for our devices...
Click to expand...
Click to collapse
hehe . no problem man . as you said threads were similar
But Yeah keep good work :good:
Bro... Awesome work :good: i tested on CM10.1 legacy xperia and got the antutu benchmarks as 6895 on first boot
Work the tweak "ro.HOME_APP_ADJ=1" in ICS really?
Sent from my WT19i using xda premium
That is the reason why i added testers needed bro
Sent from my Xperia Z using xda app-developers app
this mod is awensome, but it have one thing that i don`t like - it disable crt off mod in cm 10.1 :/
I just lost my framework's JB animations after flashing these scripts
See the features list bro... i think animations get disabled for better performance
However try this also... first install the scripts and once they are installed .. reboot the device and clear cache and dalvik cache and flash your framework-res.apk and see
Sent from my Xperia Z using xda app-developers app
Aneel said:
See the features list bro... i think animations get disabled for better performance
However try this also... first install the scripts and once they are installed .. reboot the device and clear cache and dalvik cache and flash your framework-res.apk and see
Sent from my Xperia Z using xda app-developers app
Click to expand...
Click to collapse
i tried to flash animations after scripts, but no luck same thing lost my lovely animations
gmp009 said:
i tried to flash animations after scripts, but no luck same thing lost my lovely animations
Click to expand...
Click to collapse
bro it's mentioned in the features that animations would be disabled if you have a low battery and i'll probably edit that in few hours.. and give one more add-on

[ROM][XPERIA SP][4.1.2][12.0.A.2.254][Black Edition][HonamiUltraizeD]

Disclaimer Note :​
Code:
[/COLOR][/SIZE][/B]
[SIZE="2"][B][COLOR="Blue"]
* By you using my Mods, Roms etc...
*[COLOR="red"] I am not responsible[/COLOR] for bricked devices, or dead SD cards, but I will try to help you if things go wrong.
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! [COLOR="red"]YOU[/COLOR] are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/COLOR][/B][/SIZE]
​
Introduction :
After weeks of hard work, the time has come to present you my first ROM for XPERIA SP
Here's the HonamiUltraizeD ROM for the XPERIA SP, a combo of XPERIA Z Ultra and XPERIA Z1 Honami
This is a Black Edition ROM
Code:
[/B][/COLOR][/SIZE][B][SIZE="3"][COLOR="Red"]Requirement[/COLOR][/SIZE][/B]
[B][SIZE="2"][COLOR="blue"]- Root
- CWM[/COLOR][/SIZE][/B]
Code:
[B][COLOR="red"][SIZE="3"]ROM Description [/SIZE][/COLOR][/B]
[B][SIZE="2"][COLOR="blue"]
- Offline charging bug fixed (need testors) to confirm. (works for me)
- Z Ultra/Honami Style
- Tested on both Locked and Unlocked Bootloaders
- Android 4.1.2 Jelly Bean
- Based on latest stock firmware 12.0.A.2.254 (C5302)
- Deodexed (For easy APK modding)
- Zipaligned APKs (Optimize RAM usage)
- init.d support (scripts can tweak system settings for better performance)
- De-Bloated (Removed unwanted bloatware for slimmer ROM)
- build.prop Tweaks (Improve performance and other tweaks)
- Better RAM management
- data/apps support
- sysro/sysrw support
- Slimmed down ROM size
- Very Stable
- Great Battery
- Texture Tiling enabled
- Forced automatic Texture compression
- X-Reality for Mobile (Replacing BRAVIA Engine 2), (Appears Bravia Engine 2 in Settings)
- New Xperia Z Ultra Media Apps
- New Xperia Z Ultra Launcher
- New Xperia z1 Themes/wallpapers
- Everything has been modded to black
- Fully optimized and tweaked
- Improved Touch Sensitivity
- 3G Speed Tweaked
- WIFI Tweaks
- RAM Management
- Fully Bloatware free
- Zipaligned (Improved RAM management)
- Zipalign on boot (for user applications on data partition)
- Increased Battery Life
- Project Fluid™
- Liquid Perfomance
- Fully Deodex
- Many script tweaks
- Rooted ( Busybox , SuperSU )
- Contains CWM for Locked bootloader
- Init.D Support and tweaks[/COLOR][/SIZE][/B]
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
All Tweaks description
build.prop tweaks description
Render using GPU and GPU Tweaks:
Code:
#enable harware egl profile
debug.egl.profiler=1
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
Media Quality:
Code:
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
Liquid Smooth Ui:
Code:
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
Sensor Sleep:
Code:
# For sensor sleep control
ro.ril.sensor.sleep.control=1
Unlock fps limit:
Code:
debug.egl.swapinterval=0
Qualcomm tweaks:
Code:
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
Screen Glitches fix:
Code:
debug.gr.numframebuffers=3
3G network for speeding up :
Code:
ro.ril.set.mtu1472=1
Disable Logers (safe battery + performance gain)
Code:
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
Touch tuning :
Code:
### Touch tuning ###
touch.presure.scale=0.001
Enable Hardware 3D :
Code:
hw3d.force=1
Save power while phone is in sleep mode:
Code:
ro.ril.disable.power.collapse=1
Better scrolling:
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Support for ipv4 and ipv6.:
Code:
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
Better battery life:
Code:
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
Code:
ro.config.vc_call_vol_steps=15
Increase overall scrool speed and enable rotation to 270 degree:
Better signal reception:
Code:
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
Enable 16 BIT:
Code:
debug.fb.rgb565=1
VM tweak:
Code:
ro.vold.umsdirtyratio=20
Better in call voice quality:
Code:
ro.ril.enable.amr.wideband
Signal Tweaks:
Code:
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
net speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
Wireless Tweaks:
Code:
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
Google DNS Tweak -- fastest DNS service:
Code:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Website Bypass:
Code:
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
DalvikVM:
Code:
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
#Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
Launcher tweaks: Testers needed
Code:
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
Kernel Tweaks: (Should speed things up a bit)
Code:
# Disable error checking
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
Allow purging of assets (System can free more Ram when needed):
Code:
persist.sys.purgeable_assets=1
Disabling Strict mode:
Code:
# Disable strict mode checking
persist.android.strictmode=0
Disable WiFi calling for EU models:
Code:
ro.ril.enable.ganlite=0
Decrease dial out delay:
Code:
ro.telephony.call_ring.delay=0
ring.delay=0
Decrease time for screen off/on during call:
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
Makes streaming videos stream faster:
Code:
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
For quick boot mode:
Code:
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
Hide debuging icon from taskbar:
Code:
persist.adb.notify=0
persist.service.adb.enable=1
For the default value of aGPS:
Code:
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
Enable egl profiler - enable harware egl profile:
Code:
debug.egl.profiler=1
enable/disable data in roaming:
Code:
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
Script tweaks description
Special Thanks to Jeeko bro for the PurePerformances™X | Golden Edition
One of the best scripts ever made on XDA
FEATURES:
Code:
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)[/COLOR]
Battery:
Code:
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
Code:
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- parts of CrossBreeder (credits to dev)
- parts of Adrenaline Engine (credits to dev)
- PureGraphics HD
- V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
Code:
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
Init.D Tweaks description
Features and Improvements :
Code:
- Full memory management.
- Linux kernel tweaks and improvements for better performance and battery life.
- Entropy generator engine used to reduce lags.
- Zipalign apps in "/system" and apps in "/data" every 48 hours which result in less RAM usage.
- Sqlite optimizations and faster database access.
- CPU governors tweaks and improvements for better performance and battery life.
- Increased SD Card read-ahead cache to 2048 KB .
- Ad blocking.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
In the package :
Code:
+/system/etc/init.d/ scripts :
-ram_manager: It's a complete memory manager
-92cleaner: Cleans log files and tombstones at every boot.
-09sdcardspeedfix: Set SDCard readahead speed to 2048 KB.
-darky_zipalign: Zipalign apps in "/system" at every booting.
-zipaligndata: Zipalign apps in "/data" every 48 hours.
-98fly_engine: Contains various tweaks and improvements. (3G/VM/sysctl/kernel/battery life tweaks etc.)
-sqlite_optimize: Optimizing database of apps every 48 hours.
-93kill_media_server: Kills media server when unused to save battery .
-94Governor_tweaks: Tweaks for CPU governors,It's aimed on better performance and battery backup.
+/system/xbin/ :
-sqlite3
-zipalign
-Openvpn
+/system/etc/rngd/ :
-entro
-entropy
-rngd
+/system/lib/
-libncurses.so .
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This ROM is based on 2.254 Firmware
Whats New In This ROM​
The new Home Launcher from Xperia Z Ultra
- What's new in Xperia Home 6.0.2.A.0.8:
# New animation
# Black background in apps drawer.
# Touch sound now enabled.
# New Home notification badge icon.
New Widgets from XPERIA Z Ultra
- What's new in Widgets
# New high quality widgets.
# New Photo and Video widgets layout.
# New Recent call and Camera widgets.
# New Clocks.
New Media Apps from XPERIA Z Ultra
- What's new in Media Apps
# Social Media Integration. (Sony Play Memories)
# New UI, gap less playback in walkman.
# Lagless and Smooth.
XPERIA Z1 Honami Style Alarm & Clock
- What's new in Alarm & Clock
# Themed in black
# New Layout
New Xperia Z Ultra Themes
- What's new in Themes
# New Themes layout, better, smoother and sharper than before.
New Xperia Z Ultra Keyboard
- What's new in Keyboard
# New Interface.
# New Smiley Emotions.
XPERIA Z1 Honami Phonebook and Conversations
- What's new in Phonebook and Conversations
# Black Edition "replaces white's"
# Whole New User Interface
# Dialer's background color changed to black "instead of white", call recording and speed dial options added.
X-Reality Engine
- What's new in X-Reality Engine/Bravia Engine 2
# Images are now more sharper, you'll feel like you're there.
# Better color/pixels reproduction.
- System UI, Black Edition
- What's new in SystemUI
# Z Ultra Battery Icons
# Black Status Bar
# Black Nav Bar
# Glossy Black Notification Backround
# Glossy Black Notification Header
# In Short Black Edition !!
# With Stock Xperia Soft Keys
# 3 button and 5 buttons "5 buttons will be in add-on's"
New Lockscreen
- What's new in Lockscreen
# Transparent Controllers
# Add-On given for Clock changing colors according to theme, same includes Music and Camera controllers at bottom instead of top
New Camera ~ CyberShot
- What's new in CyberShot
# Changed label to Cyber-shot
# Changed audio Bitrate Video Recording to High Quality, Variable 249-256kbps Stereo
# 100% JPEG Quality
# Sync to My App resource
# Included My Application to improve & enable High Quality on HDR Mode
# Modded media_profile
Calendar
- What's new in Calendar
# All backgrounds, icons, menu and fonts themed in black.
Start-Up Guide, Black Edition
- What's new in Start-Up Guide
# Changed theme to black from white
What else is included?
# Offline charging bugs fixed. "Tested on my device, was working, no idea if it works on yours, test/try and let me know."
# Zip Alligned for Better Ram Managment
# Build.prop Fully Tweaked
# Performance Tweaks
# Script tweaks
# Init.d Tweaks
# Bloatware free​​
List of deleted Apps/Bloatware :
Code:
GenieWidget
Gmail
GMS_Maps
facebook
talk
talkback
GoogleTTS
PlusOne
velvet
socialife
googlebooks
googlevideos
SemcNotes
youtube
livewaremanager
xperialink
sonystore
SemcEmail
chrome
VideoEditorGoogle
many more cant remember :p
Screenshots :
In Attachments
More in 2nd post. ​​​
Screenshots
Screenshots
Installation Instructions
Installation Instructions :
Fresh installation "recommended to use this ROM on a newly flashed ftf" :
Locked Bootloader
- Flash latest official Sony's 4.1.2, 12.0.A.2.254 Firmware (Do not expect much help from me if you flash it on any other firmware and get messed up)
- Root using DoomLord method http://forum.xda-developers.com/showthread.php?t=2405933
- Install CWM for Locked Bootloaders http://forum.xda-developers.com/showthread.php?t=2352920
- Reboot in recovery, Wipe Data/Factory Reset (Do not Wipe Cache Partition or Dalvik Cache) It can give some errors later.
- Flash the rom and reboot (reboot may take some time, don't panic)
Unlocked Bootloader
- Flash latest official Sony's 4.1.2, 12.0.A.2.254 Firmware (Do not expect much help from me if you flash it on any other firmware and get messed up)
- Root using DoomLord method http://forum.xda-developers.com/showthread.php?t=2405933
- You can also root and get CWM by using fastboot and flashing a prerooted kernel with CWM : http://forum.xda-developers.com/showthread.php?t=2404452
- If you don't know much about fastboot and flashing kernels after rooting install CWM for Locked/Unlocked Bootloaders http://forum.xda-developers.com/show....php?t=2352920
- Reboot in recovery, Wipe Data/Factory Reset (Do not Wipe Cache Partition or Dalvik Cache) It can give some errors later.
- Flash the rom and reboot (reboot may take some time, don't panic)
Donations
PayPal Donations
Please do the following :
-Sign in to your PayPal account page
-Go to 'Send Payment'
-Enter my email id "[email protected]"
-option "Personal payment" doesn't work for India, please set "Online purchases". and check Goods or Service (preferably service)
-Make the payment of the desired amount of donation you want to send.
Or use the Donate button below my avatar.
Thank you for your kind Donations! ​
Downloads / Add-On's
Do not mind hitting the thanks button on all posts if you downloaded/liked my ROM
Downloads :
BUILD.PROP
Why is this needed - There are small bugs in the build.prop which is inside the ROM, so please replace it with the build.prop given below to download, to replace it open ROM.zip > system > delete current build.prop and replace with the one you downloaded.
Download : http://www.mediafire.com/download/rfnvpwa7bt5dv6z/
DO NOT MIRROR ANY OF MY FILES!!!
[ROM][XPERIA SP][4.1.2][Black Edition][HonamiUltraizeD]
Download :
http://d-h.st/VuN
Add-On's -
LockScreen With Music And Camera Controller On Bottom Instead Of Top And Clock Color Changes According To Theme
Installation : Replace manually in System > App > Set Permission rw-r-r > Reboot Enjoy
Download : http://www.mediafire.com/?e120pa6taz6ja9t
System UI 5 Button Black Edition -
Installation : Rename The File To SystemUI Then > Replace manually in System > App > Set Permission rw-r-r > Reboot > Enjoy
Download : http://www.mediafire.com/?a1lu45ntfs8hps6
System UI 3 Button Black Edition -
Installation/Download : Included in ROM
System UI 5 Button Transparent -
Installation : Rename The File To SystemUI Then > Replace manually in System > App > Set Permission rw-r-r > Reboot > Enjoy
Download : http://www.mediafire.com/download/6cp2byxd2wpvlyn/SystemUI_5_button_transparent.apk
"Stock" System UI 3 Button Transparent -
Installation : Replace manually in System > App > Set Permission rw-r-r > Reboot > Enjoy
Download : http://www.mediafire.com/download/t0qkiiu43ojamyy/SystemUI.apk
Credits
Credits -
Code:
[B][COLOR="Blue"]Rozal Lovins for CyberShot MOD
niaboc79 for phonebook and conversations port
Samarth for all Z Ultra stuff
Gracie for fixing parse errors
SaM for Black Edition of SystemUI
slaid480 for scripts explanation
Aneel for many of build.prop tweaks
ZeroInfinity for Sforce Surround Sound
Jeeko for best scripts ever on XDA
alivanov79 for CWM
DoomLord for rooting method
Mr.Khan
Sony for making awesome stuff to work on
XDA
Me
Last but not the least, you all for downloading and hitting thanks :p[/COLOR][/B]
Thread ready for you guys.
Well done the best,
There is a comprehensive thread
And I hope it's also great ROM. Later test score, I'd say.
Thanks Bro...
Amin.HVS said:
Well done the best,
There is a comprehensive thread
And I hope it's also great ROM. Later test score, I'd say.
Thanks Bro...
Click to expand...
Click to collapse
I've tested it like a million of time and then completed and uploaded it, I am sure you guys will see the power of this ROM D:, good luck!
AweSome Work Bro And a lot of Tnx From Me for your great rom
+10000000000000000 For you:good:
awesome work Dude... but can you give us ScreenShoot??
dosimple12 said:
awesome work Dude... but can you give us ScreenShoot??
Click to expand...
Click to collapse
I guess there are many screenshots attached to 1st and 2nd post.
RuchRha said:
I guess there are many screenshots attached to 1st and 2nd post.
Click to expand...
Click to collapse
sory before.. but before i dont see Much Screenshot like this.. hehe.. so Im sosory
Downloadinng.....aweesoome....1st true rolopped for XSP c5302....gr8 job maan
:good::good::good:
Thanks alot for the ROM.. I will wait untill some one install this ROM in C5303.. Because day before yesterday i flashed Indian Stock FTF ( 2.254 ) in ma SP and the result is my sim card wont work. No signal.. Its keep asking me to insert ur Sim...
After that flashed C5303 firmware and deodexed it... Now ok.. So i will wait...
And we all are waiting for the Full Port of The Honami Framework... If u can do that means this ROM will call a 100% Honamialaztion....
Rajeev said:
Thanks alot for the ROM.. I will wait untill some one install this ROM in C5303.. Because day before yesterday i flashed Indian Stock FTF ( 2.254 ) in ma SP and the result is my sim card wont work. No signal.. Its keep asking me to insert ur Sim...
After that flashed C5303 firmware and deodexed it... Now ok.. So i will wait...
And we all are waiting for the Full Port of The Honami Framework... If u can do that means this ROM will call a 100% Honamialaztion....
Click to expand...
Click to collapse
I guess, I'll wait for making the full Honami Framework, coz I am literally damn busy, I was free today and had been working in this ROM since lots of week, I guess you would remember , cant promise, but yeah, I'll do it, soon.
RuchRha said:
I guess, I'll wait for making the full Honami Framework, coz I am literally damn busy, I was free today and had been working in this ROM since lots of week, I guess you would remember , cant promise, but yeah, I'll do it, soon.
Click to expand...
Click to collapse
Yes bro.. i know ur situations.. no problem.. take ur own time mate but make it perfect bro.. :thumbup:..
Waiting for Some one to test this in C5303.... All the problem is with the new baseband...
Rajeev said:
Yes bro.. i know ur situations.. no problem.. take ur own time mate but make it perfect bro.. :thumbup:..
Waiting for Some one to test this in C5303.... All the problem is with the new baseband...
Click to expand...
Click to collapse
People would be still downloading it, I guess you gota wait a while
RuchRha said:
People would be still downloading it, I guess you gota wait a while
Click to expand...
Click to collapse
When u say wipe only data...should i do that from the mount storage > format data or wipe data / factiry reset
puneethv said:
When u say wipe only data...should i do that from the mount storage > format data or wipe data / factiry reset
Click to expand...
Click to collapse
Wipe data/Factory Reset

Best build.prop tweaks 4.4.4 & 5.0.2 & 5.1.1 & 6.0.1 (updated-Jan2016)

This Thread is closed and no longer being updated
I've Started New Project (BT4A)
Check it out LINK [Updated]
Just For Rooted Devices​VPN and Security entrance FC bug , fixed​
The best build.prop tweak for Grand Prime 5.0.2 & 4.4.4
but Works for any smart phone running 4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.0.1
​
Tested Devices :
SM-G530H/DV
SM-G530H/DS
SM-G530FZ
SM-G530BT
SM-G530F
SM-G530M
SM-G360
SM-G531 (all variants)
SM-S920L
S7582 S Dous 2
LG G2 (d801)
SM-G5308W
Idol 3
Redmi 3/Pro/S/S Prime /X
Almost all of devices:good:
Waiting for feedbacks ...
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
For Grand Prime:
1. Find this line"ro.pip.gated=0" at the end of build.prop as U can see its the last line
2. Copy all of these lines just below the "ro.pip.gated=0"
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
For other phones :
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
#NEW
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
#End
U can Use Root Explorer app or notepad++ to edit your build.prop
Remember to set the permission to rw-r-r after editing ( If you don't do it your device gonna brick)
Technically it has to work with any phone with Android L but I am not responsible for any damage
Please always pay attention to risk of soft bricking
If something goes wrong use your backup build.prop to get the default settings
Does it work for your phone ? U tell me ( with details )
Send me feedbacks about your phone and I am gonna put it in the Tested List
XDA:DevDB Information
Best build.prop tweaks 4.4.4 & 5.0.2 & 5.1.1 (updated-Jan2016), Tool/Utility for the Samsung Galaxy Grand Prime
Contributors
adblocker
Version Information
Status: Stable
Current Stable Version: 1.2.1
Stable Release Date: 2015-11-01
Created 2015-08-27
Last Updated 2016-10-28
Reserved
Working great on my G530FZ
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
G530 fz
Hello
G530 fz ?
Office. Fab said:
Hello
G530 fz ?
Click to expand...
Click to collapse
working !
roozbeh158 said:
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Your Base band is HXX ! you got to wait for that !
working fine on my G530H
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Crimmy20 said:
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Click to expand...
Click to collapse
I think u didn't change the permissions ! please change the permissions after editing to rw-r-r or 0644 with the app
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
G530BT?
This should go in general section not here.
it wont work on kitkat right ?
sorry im just new to this
AJexplorer said:
it wont work on kitkat right ?
sorry im just new to this
Click to expand...
Click to collapse
working on the kitkat too
Crimmy20 said:
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
Click to expand...
Click to collapse
just the build.prop file !
set it to rw-r-r
math_natividade said:
G530BT?
Click to expand...
Click to collapse
should work ! but I am not sure :0
adblocker said:
should work ! but I am not sure :0
Click to expand...
Click to collapse
How about SM-G530H?
genesisbaliw said:
How about SM-G530H?
Click to expand...
Click to collapse
Working 100%
dcduartee said:
Working great on my G530FZ
Click to expand...
Click to collapse
Confirm!It works well in my G530FZ
Tanks
:good:

[update 19 jan 2016] new bulid prop twek for towchwiz and both cm12.1 and13

Hii guys today i want to share new bulid prop tweak for our grand 2 all variant
Tested in
Cm12.1
Cm 13
For touchwize rom not yet tested if any one want to test then can and if work plz pm
Download es file explorer or other file exploer which able to go into root folder grand supersu permission
Then goto
Root>system>build. Prop
Open bulid.prop with es editor or other as you want
And copy the the following line below and past it to inside build.prop at bottom leaving a space
#================================#
#Disables blackscreen issue after a call.
ro.lge.proximity.delay=25
mot.proximity.delay=25
#Liquid Smooth Ui
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
₹Fast Reboot
persist.sys.purgeable_assets=1
#Faster boot.
ro.config.hw_quickpoweron=true
#Increasing It Will Make Mobile Smoother
windowsmgr.max_events_per_sec=150
#Video Acceleration Enabled And HW debugging. debug.composition.type can also be changed to cpu or mdp.
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# Disable hardware overlays and use GPU for screen compositing
#Increase Performance
debug.performance.tuning=1
#NetSpeed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
#Touch Responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
#Scrolling Responsiveness
windowsmgr.max_events_per_sec=500
#Power Save Tweaks
pm.sleep_mode=1
ro.ril.power_collapse=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000
#Faster Better Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8
#3G tweaks.
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#===============================#
#====update 1 new twek===
#Deeper Sleep for better power backup
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
#================================
And full reboot your mobile not soft reboot
Flashable zip uploade see post 2
For automatic add twek to bulid prop
Hit thanks for help
And comment below if have any problem
And don't spam
And ya this bulid prop not copy from other thread so don't say to anything about it
Like bla bla bla
Note
I am not responsible for any happen with your mobile do at your own risk
Make backup of your rom using any custom recovery
Or u can use zipme to backup your orginal build prop it make flashable zip if you want to go back your orginal bulid.prop
http://play.google.com/store/apps/details?id=zip.me
New
Intatial release
Flashable zip As on 17 Jan,2016
Update1 as on 19 Jan,2016
Required
custom recovery like twrp (preferred)
Status: stable
Tested on CM12.1 and CM13 ,
touchwiz 4.4.4 as well as motion rom tw 5.1.1 (see post post 17 on page 2 of this thread)
Update 1 working with touchwize motion 5.1.1 as well as cm12 and 13
Can't say about 1st zip twaek work with touchwize not yet tested(bulid_twaek_17_Jan_2016 _IST.zip)
How to update twaek
If you already flash 17 jan 2016 zip
Then flash the second zip
Note busybox requried for flash zip
Changelog
Update1 on 19 jan 2016
Add new tweak
For more power saving when sceen off
More free ram
For performance
Special thanks to @Yuen.Jason22
For sharing twaek and conform for working in motion rom tw5.1.1
And for touchwize 4.4.4 and both cm12. And 13 tested by me
Fix the flashabe zip now you can download
Nice work,maaan. It seems to me everything is working
Bro I got some more to share
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
Sent from my SM-G800H using Tapatalk
Yuen.Jason22 said:
Bro I got some more to share
# More RAM*
#persist.sys.purgeable_assets=1*
persist.service.pcsync.enable=0*
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
Sent from my SM-G800H using Tapatalk
Click to expand...
Click to collapse
Thanka but there is problem with this which you share they give some rendom reboot in cm13 i am working on it
Bro I'm sorry I think there is no * in every lines end.
the tapatalk app auto adds * when I send it. ;(
btw I use them on touchwiz rom I don't know it on AOSP rom
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
Sent from my SM-G800H using Tapatalk
Yuen.Jason22 said:
Bro I'm sorry I think there is no * in every lines end.
the tapatalk app auto adds * when I send it. ;(
btw I use them on touchwiz rom I don't know it on AOSP rom
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
Sent from my SM-G800H using Tapatalk
Click to expand...
Click to collapse
Gr8 i will make flashable zip for touchwiz can you tell me which version of android do u test it and can you test my twek in touchwiz plz to confirm that also work in touchwiz
And thanks
android_smater said:
Gr8 i will make flashable zip for touchwiz can you tell me which version of android do u test it and can you test my twek in touchwiz plz to confirm that also work in touchwiz
And thanks
Click to expand...
Click to collapse
Bro I'm on Motion Rom 5.1.1 S5 mini port
I'll download your zip rite now and flash it and tell you the result
Sent from my SM-G800H using Tapatalk
---------- Post added at 09:59 PM ---------- Previous post was at 09:10 PM ----------
android_smater said:
Gr8 i will make flashable zip for touchwiz can you tell me which version of android do u test it and can you test my twek in touchwiz plz to confirm that also work in touchwiz
And thanks
Click to expand...
Click to collapse
Bro I just flashed the zip but error occurs.
For the result:
Error: failed to execute updater binary......(and some more words I forgot)
maybe it is because I'm using Touchwiz and my phone is SM-G7105?(Grand 2 LTE variant)
Sent from my SM-G7105 using Tapatalk
Yuen.Jason22 said:
Bro I'm on Motion Rom 5.1.1 S5 mini port
I'll download your zip rite now and flash it and tell you the result
Sent from my SM-G800H using Tapatalk
---------- Post added at 09:59 PM ---------- Previous post was at 09:10 PM ----------
Bro I just flashed the zip but error occurs.
For the result:
Error: failed to execute updater binary......(and some more words I forgot)
maybe it is because I'm using Touchwiz and my phone is SM-G7105?(Grand 2 LTE variant)
Sent from my SM-G7105 using Tapatalk
Click to expand...
Click to collapse
Ok i will check may be there may be some error in update script
android_smater said:
Ok i will check may be there may be some error in update script
Click to expand...
Click to collapse
mis-match in device codename.
you made this for G7102,you should add G7105 also.
Lol maybe I changed the model name form SM-G800H to SM-G7105?
Sent from my SM-G7105 using Tapatalk
I am just new to making flashable zip to add bulid prop tweak through recovry so there may be some mistake i am checking on it
neonkat said:
mis-match in device codename.
you made this for G7102,you should add G7105 also.
Click to expand...
Click to collapse
Not add any specified code name as it is unveraal script for falshing zip ok i am checking it
Flashing problem..
Sent from my SM-G7102 using XDA Free mobile app
nirupom das Andrid Lver said:
Flashing problem..
Sent from my SM-G7102 using XDA Free mobile app
Click to expand...
Click to collapse
What problem do you face ?
And does you use latest falsable zip plz check
And busybox latest version should be install in your mobile
Check whete busybox properly installed or not just download busybox checker from play store
Because when i see your comment i rechecked my flashable zip and it working i am using twrp
If falshable zip not working there is problem with your phone because i check it 10 time +1 now
U can just copy and paste the twek in bulid.prop see op page
hey im using d stock rom (touchwiz rooted)
can i use this build prop to improve performance is it compatible with stock rooted rom?
darryl1234 said:
hey im using d stock rom (touchwiz rooted)
can i use this build prop to improve performance is it compatible with stock rooted rom?
Click to expand...
Click to collapse
compactible from android 1.6 to 6.0.1 and all phones.
darryl1234 said:
hey im using d stock rom (touchwiz rooted)
can i use this build prop to improve performance is it compatible with stock rooted rom?
Click to expand...
Click to collapse
Ya may be work because it is working with tw 4.4.4
Test your self and comment here
And ya some code are modified it may not work below 4.4.x
Moved to the more appropriate General section and cleaned thread...
@android_smater does this line can do any better?
#Misc
persist.sys.shutdown.mode=hibernate
persist.radio.add_power_save=1
ro.semc.enable.fast_dormancy=false
ro.config.hw_quickpoweron=true
ro.ril.sensor.sleep.control=1
power_supply.wakeup=enable
persist.android.strictmode=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.compcache.default=0
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=true
dalvik.vm.jmiopts=forcecopy
ro.ext4fs=1
ro.setupwizard.mode=DISABLED
dalvik.vm.heaputilization=0.25
dalvik.vm.heaptargetutilization=0.75
If not maybe one of the line can be use. I found it at a thread for Samsung Galaxy S2

Categories

Resources