Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
So, let's go, let me help you mate...
1 - turn off your phone;
2 - press and hold every single physical button together (power, Vol+, Vol-)
3 - You will see a recovery screen (like an DOS on computer)
4 - Pressing Vol- you change the options, Vol+ you select any option there
5 - Enter the option: AP Fastboot
6 - Download the program called RSDLite
7 - Download a full official retail JB rom
8 - Install this rom using RSDLite
9 - After you pass whole process succesfully, your phone is ready to be used again.
Remember: CHARGE your phone to 100%, because the process is slow and your battery will drain fast, so have sure you did a long charge before installing the rom again.
I was direct on the answer...if you have any doubt...so ask...
ayeros said:
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
Click to expand...
Click to collapse
I tryed all of those before but dont have any display at all ;\ i mean really nothing not even text on screen
Anyone ?
Related
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
I have big problem. A few days ago I Think that i bricked my phone. Only think which I can see on the screen when i turn on my phone is a logo of LG. All time is trying to load . The home button is lighing like when i turned on it before.
It's started when I format all system by a clockworkdmod. I don't know if can I repair that.
Any ideas ?
P.S Maybe any1 know how can i go into clockworkmod without console ? I think 'bout a combinations of keys in load screen.
David_Adamczyk said:
I have big problem. A few days ago I Think that i bricked my phone. Only think which I can see on the screen when i turn on my phone is a logo of LG. All time is trying to load . The home button is lighing like when i turned on it before.
It's started when I format all system by a clockworkdmod. I don't know if can I repair that.
Any ideas ?
P.S Maybe any1 know how can i go into clockworkmod without console ? I think 'bout a combinations of keys in load screen.
Click to expand...
Click to collapse
Explain how you did that. Also can you get in emergency mode? Pull battery out. Wait 10 seconds and put it back. Hold the volume down key and plug an USB in the phone (Usb must be connected to pc in an USB 2 port).
To enter CWM, retire battery, use volume down + QuickMemo button + Power. When vibrates, quit the Power Button. If that doesn't help, flash the stock kdz using LG Flash Tool.
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year. pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/lg-g5
With that stated...
Your best bet is probably to take a look at the following thread and, if needed, post your question within that thread.
https://forum.xda-developers.com/showthread.php?t=3350648
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
medja77 said:
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Sorry to hear this...
Have you the Fastboot access? How to Check:
1) Remove Battery and put it back
2) Press and hold Volume - (Volume down) and connect via USB to your PC
3) The Phone Screen should change now and you can read something about Fastboot Mode
OR
Can you set your Phone into Firmware Download Mode?
1) Remove Battery and put it back.
2) Press and hold Volume + (Volume up) and connect via USB to your PC
3) The Phone goes normaly into Download-Mode now, see it on Phone Screen
4) Open LG Bridge and go to Update and then in the Bottom right Hand side onto >Correct Update Errors< this will flash your Phone with the Stock Rom
Working for you?
Hello,
I'm going on again on my WP15 which is on bootloop after trying to put an magisk patched rom to obtain root.
The objective now is just to put a official factory rom (which I downloaded from the official website for the right model)
The problem now is not how to do that but how I can connect the phone to the computer because :
Assuming that the phone is connected via usb-c to the computer on usb-a and the phone is on.
1 The screen is black
2 windows connect sound
2.1 Com port connected (device manager)
X wait 1s
3 windows disconnect sound
3.1 com port disconnected (device manager)
2&3 x2
4 Screen on : On screen :5G oukitel logo + android logo + Orange state; devive unlocked[...] not trusted[...]; device will boot on 5s
repeat 1 indefinitely
Please Note :
That I do not have ADB access since I switched from w10 to 11 so the rsa keys are not valid.
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
The phone is only off when out of battery, As soon as I connect a cable the phone turn on and I can do nothing except disconnect cable and wait (Can be very long with an 15000 mAh battery...)
There is absolutely no custom bootloader so no twrp or any custom recovery/installation bootloader.
With that... I think it's definitely bricked... I'm already thinking of soldering a new rom (or asking someone to do for me)
If you need more details or precisions tell me !
Thank you in advance !
Lunalunea said:
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
Click to expand...
Click to collapse
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
vxsw said:
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
Click to expand...
Click to collapse
Hello,
Sorry, I was not very active since this post and I abandoned for a very long time.
But ! Your instructions was good and I finally got my phone back to life !
Since then I realized that the Oukitel brand is very sketchy about theirs ROMs on the Oukitel website because the WP15 model is associated with the WP13 ROM on the download center so... WHY ? this is so confusing because now I have a WP15 advertised ROM (From a website... Yes... I know I was dumb to do that) and it's working yes... but this is very buggy for example the gyroscope is crazy or my MAC address is never the same even if I turn the built-in MAC address spoofing option off...
I will do some research just to get my phone as normal by doing it as clean as possible because I know now what is implying for doing that.
Thank you so much for your patience and especially for your guide and I apologize for my dumbness.
Lunalunea said:
the WP15 model is associated with the WP13 ROM on the download center
Click to expand...
Click to collapse
have no idea what are you talking about.
just checked in dl center on oukitel official site and seems all is ok. wp15 have it's own fw page and redirect to correct dl fw page, wp13 have it's own.
you can't mix up fw, in case wp13 signed exactly as wp13:
v318a-oq-s88-128g8g-bom2-hdp-r0-cts-eu_OUKITEL_WP13_EEA_V12_20210731_user_20210731.tar .gz
wp15 have no direct sign, but it have a cpu defenition:
TF919_OQ_S89_6833_R0_EEA_V1.9.7.2_S211014 .zip
i.e. mt6833 aka dimensity 700. wp 13 have a dimensity 800 aka mt6873
nb, in dl center, fw tool seems not works properly, so you must use a flashtool as I'd referred before.
I've tried everything, for 5 full days, then had no option left but to give up. Sorry.