Installing a new ROM. - Micromax A116

Today morning i was trying to install Chainfire 3d. I clicked the second option it rebooted but now the phone gets struck on the boot logo.
The phone doesnt boot. Waited for and hour tried 20+ times.
I have already installed CWM recovery. But when i click restore it says m5 sum error( Yes CWM is still working).
I even tried factory reset but it didnt work. What do i do?
Explain in detail help me plz.
OK: I got few replies and the most common one was to flash a new ROM.At present i want to stick to the stock 4.2.1.
I'm currently on 4.1.2.
Everybody gives the method to flash via SP Flash tools, which i don't want to as it doesn't detect my device properly and i don't want to waste my time in it.
As i mentioned earlier i have already rooted and have installed CWM recovery. Can i CWM to install the official ROM.When does TP upgrade pop-up. How should i install it using CWM + precautions and detailed explanations.
Should be noob friendly.

Go and check development section, you need to find a ROM which can be flashed VIA recovery.
There are threads which show how to install drivers, and IF you try to flash VIA SP Tools make sure you remove battery, sim card, sd card, initialise the download process and then connect the phone.

eagledipesh said:
Go and check development section, you need to find a ROM which can be flashed VIA recovery.
There are threads which show how to install drivers, and IF you try to flash VIA SP Tools make sure you remove battery, sim card, sd card, initialise the download process and then connect the phone.
Click to expand...
Click to collapse
Flashed a ROM through CWM now working fine.

G.Ashwinkumar said:
Flashed a ROM through CWM now working fine.
Click to expand...
Click to collapse
Please press thanks, its free.

Related

Can't boot into clockwork recovery

Ok so i downloaded rom manager and selected the top option flash clockworkmod recovery and picked my phone ( im already rooted by using the one step click root) and then i picked install rom from SD card and picked my room (which is Bi-winning v3) and my phone turned off and rebooted and went into the samsung recovery screen i tried to reinstall packages but gave me a error , i even tried the "all clockworkmod" recoveries and no luck same thing happens boots me up to the samsung recovery.
Does any one know what am doing wrong or what i can do to fix this problem?? thanks in advance and im still on my stock android os have't changed anything.
First, you need to start with a clean SD card. Then, open ROM Manager, flash cwr etc. etc. When it is finished downloading, power off the phone and reboot into recovery. From there (this is where the clean SD card is needed) then hit "reinstall packages, then hit reboot. This should bring up the iconic green text. reply if there are any problems.
honoluluacx said:
First, you need to start with a clean SD card. Then, open ROM Manager, flash cwr etc. etc. When it is finished downloading, power off the phone and reboot into recovery. From there (this is where the clean SD card is needed) then hit "reinstall packages, then hit reboot. This should bring up the iconic green text. reply if there are any problems.
Click to expand...
Click to collapse
hmm so do i need to clean my sd before i flash cwr or do i do it when i reboot my system?? from the android recovery screen??
Is not very clear to me. Did you flash your phone previously? have you done ODIN, kies, etc? have you tried this?
http://forum.xda-developers.com/showthread.php?t=833423&highlight=recovery
-ODIN to stock
-go here> http://forum.xda-developers.com/showthread.php?t=1157002 and download the link in the EDIT: POSSIBLE FIX (put this on root of internal SD)
-Re-install packages through stock recovery.
For some reason Rom Manager is not flashing CWR right. I couldn't get it to stick for hours. Just kept rebooting into normal load.
Follow the instructions above and you should be good to go. The 1.72mb update.zip should give you root and CWR
suchavibrantthang said:
-ODIN to stock
-go here> http://forum.xda-developers.com/showthread.php?t=1157002 and download the link in the EDIT: POSSIBLE FIX (put this on root of internal SD)
-Re-install packages through stock recovery.
For some reason Rom Manager is not flashing CWR right. I couldn't get it to stick for hours. Just kept rebooting into normal load.
Follow the instructions above and you should be good to go. The 1.72mb update.zip should give you root and CWR
Click to expand...
Click to collapse
Im not sure how to use odin and what does it do ?? and i read the the topic you linked and seems like im not the only one having problems
Just download that update.zip he referenced (that I put there), and flash it.. instead of using Rom Manager.
it will root and install CWR for you.
I need to update my guides.
s15274n said:
Just download that update.zip he referenced (that I put there), and flash it.. instead of using Rom Manager.
it will root and install CWR for you.
I need to update my guides.
Click to expand...
Click to collapse
Nope no luck same thing happens , i guess i will wait for a fix for rom manager
xringo said:
Im not sure how to use odin and what does it do ?? and i read the the topic you linked and seems like im not the only one having problems
Click to expand...
Click to collapse
i highly suggest you learn how to use ODIN in the Vibrant Bible. If you're doing anything that has to do with rooting and flashing your phone, be sure you know how to revert back to stock. You WILL NEED TO at some point or another or find out what if feels like to own a brick.
xringo said:
Nope no luck same thing happens , i guess i will wait for a fix for rom manager
Click to expand...
Click to collapse
Please check the sticky in my signature for noobs... I updated and tested it last night, I know it works.
xringo said:
Im not sure how to use odin and what does it do ?? and i read the the topic you linked and seems like im not the only one having problems
Click to expand...
Click to collapse
video regarding odin to stock
http://www.youtube.com/watch?v=l3K9my9kAvI
here is a link for the files you need for this procedure
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/

[Q] rooted device can't install new ROM

Hello everybody,
First I'd like to thank to community for the hard work. I v read a countless amount of pages of this forum and I can't even imagine the time people spent helping on issues or writing tutorials.
So thank you if you re up to spend few minutes on my specific case (and sorry for the bad english).
Here is my device and the different version of kernel ...
1/ Rooting my device (tutorial in french translated from xda)
http://www.cnetfrance.fr/produits/guide-rooter-son-galaxy-s2-39763841.htm
S-Root version used: http://forum.xda-developers.com/showthread.php?t=1125414
Everything went pretty well when I rooted the GS2. I got the Superuser app so i figure it's ok.
I just used a modified kernel found on xda who was corresponding the my base band version (just the PDA in Odin).
2/ Installing a new ROM (Cyanogenmod by Rom Manager)
I followed : http://www.redmondpie.com/install-cm7-on-galaxy-s2-using-rom-manager-how-to-tutorial/ and http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide (official guide) using Rom Manager premium.
When i tried to reboot in Recovery (manually or with Rom Manager), i can't find the "Install the zip" option, I have 4 available: "Update from the zip", the 2 wiping/delete options and the reboot.
So obviously if i try to wipe files, wipe the cache then to update with the zip I have the following Error:
E: failed to verify whole-file signature
Do you have any idea what went wrong in the process ?
Should i flash the phone withOdin and change my base band version to another one ?
For info, I did the Permission Fix option in Rom Manager too. Didnt help.
Thanks a lot.
U need clockworkmod instaled first..
Sent from my GT-S5570 using xda premium
sgt_ray said:
Do you have any idea what went wrong in the process ?
Click to expand...
Click to collapse
You didn't install ClockworkMod Recovery.
Thanks for theses answers but I think I installed it with Rom Manager and i flashed it to the last version.
(joined file 1 : cwm rom manager.jpg)
When i reboot in recovery mode here is the only options available (and it's the problem i pointed out) :
(joined file 2 : 20111125_13221022.jpg)
Maybe a problem with my SD card ?
sgt_ray said:
but I think I installed it with Rom Manager and i flashed it to the last version.
Click to expand...
Click to collapse
As we've already said, you haven't installed CWM Recovery. You see at the top of your second photo where it says "Android system recovery (3e)"? That's stock recovery.
you can't install CWM recovery thru ROM manager.
just flash the CF Root Kernel for KI4 thru ODIN , you will have CWM recovery.
Hmm I understand about the CWM version I'm booting with, but as you can see on the first capture, my kernel version is a modified one i got after using Odin (puting this Kernel : GT-I9100_XXKI4_insecure.tar from http://forum.xda-developers.com/showthread.php?t=1101671).
I got the root access by S2 Root.
Ok I think I installed only the Kernel and not CF Root available here : http://forum.xda-developers.com/showthread.php?t=1103399
I ll try to redo Odin and stuff and let you know if I'm still alive.
So it's not great right now. I have installed CF Root with Odin, so I had CWM on my phone (I could see the application). Then after reboot with CWM Recovery and installing Cyanogenmod, the phone doesnt want to start anymore.....
I tried to apply the insecure kernel again with Odin but still impossible to download. I'm stuck on the screen with the yellow sign and written Galaxy S2.
HALP !!
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Do you think the phone is dead ?
5 posts in a row?
So, just to clarify, you've tried to install CM7, which amongst other things tells you to do a nandroid backup, and also to flash twice in succession. Did you do either of these things? The instructions are there to be followed, don't just ignore them.
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
sgt_ray said:
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
Click to expand...
Click to collapse
Flash a stock rom with Odin and then root your phone again. Start reading and follow procedures when you want to flash custom roms again .See Intratechs`s thread for a stock rom
Thanks for your reply.
I did it, it didn't work, I mean i could flash with Odin but the reboot doesn't work : the start screen appeared without the yellow sign, but it's stuck on it.
--- update
FYI, I installed Rom Manager yesterday, it way interact in a bad way with CWM Recovery.
For now i can mount USB by CWM Recovery but cannot do anything else.
If you have a method to clean completely the phone ? Maybe the bootloader is broken...
sgt_ray said:
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Click to expand...
Click to collapse
Wipe data and cache after flashing..
Sent from my GT-S5570 using xda premium
I did it. 20 times .
Maybe I should re partition my SD card...
--- update ---
I re partitionned my SD Card with Odin and tried to install a new stock ROM. Everything pass with Odin but to finalize the set up (while reboot), I got some errors and still the same problem during the boot. It's stuck !
I installed a insecure Kernel so I can access CWM Recovery but still stuck and now I can't mount anything .
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
sgt_ray said:
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
Click to expand...
Click to collapse
Good luck...
Sent from my GT-S5570 using xda premium

[Q] Unable to flash custom ROM

I did find a lot of threads but i didnt get any answer to my question.
I was using a 2.3.6 stock Atrix 4G. I decided on getting the cm9 so i unlocked the bootloader using the following link http://forum.xda-developers.com/showthread.php?t=1182871
as i am using the newer version so i was advised to run option 1 of the script( click the link to see the script) and then option 3. I did option 1 and then my phone got stuck in unable to boot and then i ran option 3 and just pressed enter and my phone booted. So i didnt advance on the script and closed the script. Now my phone says UNLOCKED at the m logo while booting.
And then for rooting i used the following link http://forum.xda-developers.com/showthread.php?t=1769497
i did get some errors while using the coding( as i had typo error) but then after two reboots and trying i got the success on my cmd window.
but i didnt get the same command promt text as upndwn4par( see the link) got. Still i anyhow got success. I checked my apps and super user was indeed sitting there.
After unlocking and rooting i downloaded rom manager and also downloaded cm9.zip file into my sd. Then pressed flash CWM and then also made a backup for my stock ROM and then pressed download from sd card on rom manager , then it asks cleear cache dalvik and backuo. I checked all and then my phone reboots and gets stuck in the ANDROID GUY with an Exclamation mark inside a triangle. I also tried reboot with recovery in ROM manager but the same screen.
I have mentioned all my steps. So please guide me where or what am i doing wrong?
please help , cause moto ditched me and i want to ditch moto's software.
aka007 said:
I did find a lot of threads but i didnt get any answer to my question.
I was using a 2.3.6 stock Atrix 4G. I decided on getting the cm9 so i unlocked the bootloader using the following link http://forum.xda-developers.com/showthread.php?t=1182871
as i am using the newer version so i was advised to run option 1 of the script( click the link to see the script) and then option 3. I did option 1 and then my phone got stuck in unable to boot and then i ran option 3 and just pressed enter and my phone booted. So i didnt advance on the script and closed the script. Now my phone says UNLOCKED at the m logo while booting.
And then for rooting i used the following link http://forum.xda-developers.com/showthread.php?t=1769497
i did get some errors while using the coding( as i had typo error) but then after two reboots and trying i got the success on my cmd window.
but i didnt get the same command promt text as upndwn4par( see the link) got. Still i anyhow got success. I checked my apps and super user was indeed sitting there.
After unlocking and rooting i downloaded rom manager and also downloaded cm9.zip file into my sd. Then pressed flash CWM and then also made a backup for my stock ROM and then pressed download from sd card on rom manager , then it asks cleear cache dalvik and backuo. I checked all and then my phone reboots and gets stuck in the ANDROID GUY with an Exclamation mark inside a triangle. I also tried reboot with recovery in ROM manager but the same screen.
I have mentioned all my steps. So please guide me where or what am i doing wrong?
please help , cause moto ditched me and i want to ditch moto's software.
Click to expand...
Click to collapse
Do i need to install CWM Recovery sperately onto my phone. As in i have installed ROM manager. Do i need to install cwm recovery also.
In flash CWM recovery it says current recovery 5.0.2.0.
guys please help
aka007 said:
Do i need to install CWM Recovery sperately onto my phone. As in i have installed ROM manager. Do i need to install cwm recovery also.
In flash CWM recovery it says current recovery 5.0.2.0.
guys please help
Click to expand...
Click to collapse
You have posted this question 5-6 times. Spamming the forum is not allowed.
I don't think recovery is installed properly. Try to fastboot flash recovery.
http://forum.xda-developers.com/showthread.php?t=1905222
upndwn4par said:
You have posted this question 5-6 times. Spamming the forum is not allowed.
I don't think recovery is installed properly. Try to fastboot flash recovery.
http://forum.xda-developers.com/showthread.php?t=1905222
Click to expand...
Click to collapse
Can i install the recovery using rom manager. What i did was download the Recovery from the link you provided and then put it into my internal and then flash the cwm ad then it flashed. then i did install rom from sd card , i seleted the cm9 then selected backup and all. I did a little of installation and now its stuck in the boot screen for 30+ mins.
aka007 said:
Can i install the recovery using rom manager.
Click to expand...
Click to collapse
I would recommend using fastboot.
aka007 said:
I did a little of installation and now its stuck in the boot screen for 30+ mins.
Click to expand...
Click to collapse
What do you mean "did a little of installation"? You either install or you don't...
ravilov said:
I would recommend using fastboot.
What do you mean "did a little of installation"? You either install or you don't...
Click to expand...
Click to collapse
sorry, i must have got crazy thinking i bricked my phone. Started praying and all.
But now, Thank God i did install the cm9 with a help of many people. I got help from random posts and all. Now my problem is what version of gaaps do i install.
i already have this version in my computer gapps-ics-20120429-signed.zip (dont know where i downloaded it from)
but in http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps it shows the version below
gapps-ics-20120317-signed.zip

[Q] P780 - Help installing ROMs (any)

Hi Guys,
Can someone help me, please? I've rooted my P780, and installed ClockworkMod Recovery. I can't seem to get any ROMs to install, though. I've tried four now, two from the forums here and two from needrom.com, but none of them install.
I put the ROM zip file on the SD card, reboot to CWM, wipe etc then try and install but for every ROM I get the following:
Warning: No file_contentssymlink: some symlinks failed
E: Error in <ROM zip file> (Status 7)
Is there something more I have to do? Or should I try and flash by other means?
Thanks!
GlumReaper said:
Hi Guys,
Can someone help me, please? I've rooted my P780, and installed ClockworkMod Recovery. I can't seem to get any ROMs to install, though. I've tried four now, two from the forums here and two from needrom.com, but none of them install.
I put the ROM zip file on the SD card, reboot to CWM, wipe etc then try and install but for every ROM I get the following:
Warning: No file_contentssymlink: some symlinks failed
E: Error in <ROM zip file> (Status 7)
Is there something more I have to do? Or should I try and flash by other means?
Thanks!
Click to expand...
Click to collapse
Flash TWRP 2.7.1.1 and try again!
Tell me if you get any errors !
¬
stympy said:
Flash TWRP 2.7.1.1 and try again!
Click to expand...
Click to collapse
Thanks for the reply Stympy. I was looking at this myself, having found this thread:
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
And your helpful thread here:
http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
I'll give it a go. It might be tricky because I have 64 bit and couldn't initially get the drivers working. I'll keep trying though!
GlumReaper said:
Thanks for the reply Stympy. I was looking at this myself, having found this thread:
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
And your helpful thread here:
http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
I'll give it a go. It might be tricky because I have 64 bit and couldn't initially get the drivers working. I'll keep trying though!
Click to expand...
Click to collapse
Iff your phone is rooted do this:
Download TWRP 2.7.1.1 from my post and install Mobileuncle Tools from Magazin Play!
Extract TWRP from archive rename it recovery.img and copy on your internal memory, in the root of your internal memory not in one folder.
Open Mobileuncle Tool and go to Recovery Update>and the first option select and flash. Then restart directly to recovery. Not optional!
Try this!
Waiting for feedback.
Sadly, I'm still having problems.
I booted up the stock ROM (had to try and get it back off Chinese! :laugh: )
I reinstalled Framaroot, rooted and then used MobileUncle tools to install the recovery.img from your TWRP zip as suggested. This has worked, I now have TWRP as recovery, which is good, thanks.
However, when I try and install a ROM from ZIP - just tried an AOSP and an SLXROM - I get the same thing:
Code:
symlink: some symlinks failed
Error executing undater binary in zip '/external_sd/SLXROM)v26-Lenovo_P780-ROW.zip'
Any more help would be greatly appreciated.
GlumReaper said:
Sadly, I'm still having problems.
I booted up the stock ROM (had to try and get it back off Chinese! :laugh: )
I reinstalled Framaroot, rooted and then used MobileUncle tools to install the recovery.img from your TWRP zip as suggested. This has worked, I now have TWRP as recovery, which is good, thanks.
However, when I try and install a ROM from ZIP - just tried an AOSP and an SLXROM - I get the same thing:
Code:
symlink: some symlinks failed
Error executing undater binary in zip '/external_sd/SLXROM)v26-Lenovo_P780-ROW.zip'
Any more help would be greatly appreciated.
Click to expand...
Click to collapse
Ok. It seems to me that you have problems with the archives, maybe i am wrong. Try to see if the archives are not corrupted by something.
Try first to replace your SD Card just for test, and try to reflash SLX or AOSP again.
One more thing: be careful when you download the archives not to be corrupted.
Sent from my Lenovo P780
It's still not working for me
I've taken the SD card from my older phone, which has been working fine for years. Formatted it and reloaded ROMS, but I still get exactly the same thing. I've tried five different ROMS, which were downloaded across two different computers at home and one in work on a different connection, so I can't imagine that all of these files would suffer the same corruption.
I've been having a search around and did find one person suggesting that it might be to do with storage space. I think I've seen in this forum (but I can't find it now) that you can resize the system storage partitions. Do I need to try this?
Thanks for your continuing help!
Partitioning didn't seem to help.
I followed the instructions in this thread:
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
But I still get the same thing when I try to install a ROM from SD Card. :crying:
I feel sure there's something really simple that I've missed, but even re-reading all the threads I can't figure it out.
GlumReaper said:
Partitioning didn't seem to help.
I followed the instructions in this thread:
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
But I still get the same thing when I try to install a ROM from SD Card. :crying:
I feel sure there's something really simple that I've missed, but even re-reading all the threads I can't figure it out.
Click to expand...
Click to collapse
Hi. Tell me what is your partitioning?
stympy said:
Hi. Tell me what is your partitioning?
Click to expand...
Click to collapse
I used the 'recommended' option in the ReParted/Aroma tool.
Now in the stock OS I can see:
Internal Storage:
2.56GB total
1.33GB available
USB Storage:
1.03GB total
1.02GB available
And then my 16GB SD card as well.
Well, I think I broke it. :crying:
Out of desperation and thinking I might have got the wrong idea, I tried a china, not ROW rom. Strangely, TWRP seemed to be able to install this. However, now the phone won't boot. So I have no OS at all!
I can still load TWRP recovery, but it still won't install roms. Also it keeps telling me it can't mount /data for some reason.
Can anyone help, please? What have I done?
This sounds like me ... the first 24 hours i had my p780. After that i discovered i have a newer version (also Chinese) of the phone then most of the forum members. I can only flash through the flashtools (i don't even bother to install a custom recovery anymore). You need an other preloader.
So just try it ( you got nothing to loose anyway )
Download the flashtool if you didn't do that already .
Make sure you have the correct drivers installed
Download a rom you can flash with the flashtool (i'm using a modified version of VibeUi2.0 no Chinese apps, and extra languages )
replace the preloader in the rom with the one attached.
shutoff your phone.
load the rom in the flashtool (make sure you've selected everything you need like DL with checksum etc, if you never did it please read threads and topics)
press download and connect your phone ...
for me all this above resurrected my phone again
Re-Mi said:
This sounds like me ... the first 24 hours i had my p780. After that i discovered i have a newer version (also Chinese) of the phone then most of the forum members. I can only flash through the flashtools (i don't even bother to install a custom recovery anymore). You need an other preloader.
So just try it ( you got nothing to loose anyway )
Click to expand...
Click to collapse
Thanks for your reply Re-Mi! It gives me hope to know you got yours sorted. I'll definitely try your suggestion.
I'm just wondering, how do I use the flash tool? All the tutorials I've seen have needed the phone to be on and have usb debugging on. But I don't have a working OS for this, only TWRP recovery works now. Is that what the preloader is for? I shall research!
Again, thanks.
GlumReaper said:
Thanks for your reply Re-Mi! It gives me hope to know you got yours sorted. I'll definitely try your suggestion.
I'm just wondering, how do I use the flash tool? All the tutorials I've seen have needed the phone to be on and have usb debugging on. But I don't have a working OS for this, only TWRP recovery works now. Is that what the preloader is for? I shall research!
Again, thanks.
Click to expand...
Click to collapse
Step by step guide :
If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
Shutdown your phone if its not in a bootloop. If it is skip this step.
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
Make sure the checkbox "DL DA All With Check Sum" is CHECKED
Click on "Firmware->Upgrade" button.
Plug in your powered down phone via the USB cable again. See it flash.
When a big green circle appears on the screen, your are done!
Source
Woohoo! Got my phone working!
Thanks for your help guys. In the end I borrowed a laptop that had windows 7 on, which I was able to get the flash tool working on. So I've now flashed with the kitkat version of the stock ROM
I still don't know why TWRP wouldn't flash any one of the eight different ROMs I tried!
I'm going to continue messing about with the phone. I'd like to get Life ROM working, but I need TWRP back first.
Again, thanks all.

Can't boot into recovery mode after flashing ClockworkMod Recovery in Intex Aqua i5

Hello! This is my first post
I am hoping that you guys can give me some pointers about resolving the issue with my phone, I searched around but I can't find anything
I can't boot into recovery mode after flashing ClockworkMod Recovery... It just restarts and boots normally if I try to enter into recovery... I used the instruction from this website to do it: (I am unable to post the link, so I am putting the text in the quote box)
How to install CWM Recovery
Here is what you need to do to flash a custom recovery image – more exactly CWM Recovery – on the smartphone.
First task for you to accomplish: find and then flash MobileUncle MTK Tool on the AQUA i5.
Launch it afterwards. Then be sure you do this: tap the option called Update Recovery and afterwards transfer recovery.img to the phone’s SD card root.
After you have patience for a couple of minutes (not more than five), the CWM Recovery tool will be flashed on the Intex AQUA i5.
If everything went well, your handset should reboot into the custom recovery image. Now your phone is both rooted and installed with ClockworkMod Recovery.
NOTE: In the eventuality of a problem, like for example the smartphone gets stuck in boot loop, you need to solve this by taking the battery out of the device, then inserting it back in and re-doing the tutorial from the first step to the very last one.
The I5 could also surprise you with this issue: getting stuck in “Welcome” screen. For this to go away, you will have to repeat the steps we gave you for the previous problem. All is well now.
Click to expand...
Click to collapse
Is there a way to fix this or should I flash my recovery again? Thanks in Advance, TD
TheDcoder said:
Hello! This is my first post
I am hoping that you guys can give me some pointers about resolving the issue with my phone, I searched around but I can't find anything
I can't boot into recovery mode after flashing ClockworkMod Recovery... It just restarts and boots normally if I try to enter into recovery... I used the instruction from this website to do it: (I am unable to post the link, so I am putting the text in the quote box)
Is there a way to fix this or should I flash my recovery again? Thanks in Advance, TD
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Oh, It would be nice if a mod or admin can move this thread over there
ROM manager app may help
if your phone is rooted, then try installing a recovery from app called ROM MANAGER, hope that would help
I already tried that, Its says that my device is not supported
What phone have you got? Full model number?
Intex Aqua i-5.... That is all I know
try this http://forum.xda-developers.com/showthread.php?t=2255657
Already tried, Can't get past step 7
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
Click to expand...
Click to collapse
I was confused whether to do it while the phone is switched off or on... I tried both for that reason but no luck
Also, I can't see the status bar change to "Searching too"
TheDcoder said:
Intex Aqua i-5.... That is all I know
Click to expand...
Click to collapse
i think you might have to reset your whole phone by installing stock firmware again,, this video i found from youtube. use your instinct to trust this video but its entirely your decision.
https://www.youtube.com/watch?v=_pYqKjOkihg
i wish i could help more.
Thanks
I will try to attempt it again... Will post the results here
Try Cwm rom manager, it will provide you with suitable recovery, otherwise try flashify, same function as Cwm rom manager but with extra recovery such as Cwm,twrp,pliz etc.
TheDcoder said:
Already tried, Can't get past step 7
I was confused whether to do it while the phone is switched off or on... I tried both for that reason but no luck
Also, I can't see the status bar change to "Searching too"
Click to expand...
Click to collapse
switched off... flash tools usually require the device to be off. Did you install the driver correctly?
Yes, I did install the drivers correctly... atleast I believe I did

Categories

Resources