Related
I rooted my phone and had Revolutionary recovery. I installed Rom Manager and installed the recovery, and now I cant get to my recovery screen no matter what I have tried. I really need help because now I cant do a factory data reset, flash new ROMs, anything. I have tried through bootloader, everything and I cant get to that screen. Has anyone had this problem or can anyone help me?
bslim11 said:
I rooted my phone and had Revolutionary recovery. I installed Rom Manager and installed the recovery, and now I cant get to my recovery screen no matter what I have tried. I really need help because now I cant do a factory data reset, flash new ROMs, anything. I have tried through bootloader, everything and I cant get to that screen. Has anyone had this problem or can anyone help me?
Click to expand...
Click to collapse
5.0.2.0 CWR?
Have you rebooted?
ROM: Warm TwoPointThree
Kernel: MegAnthraX
Software: 2.08.651.3
Baseband: 0.97.10.0808
PRI: 1.24_003
Don't use rom manager to flash recovery. Also, just my opinion, but TWRP recovery is better than clockwork. So, find the TWRP thread, grab the PG86IMG.zip and flash in hboot. Should solve all your issues.
Rebooted quite a few times, still cant get to recovery mode. I guess this is where being a noob kind of sucks, but how do I flash when I cant get into recovery, or how do I flash in hboot?
You don't have fastboot checked under power settings, do you? If so, uncheck it.
Sent from my PG86100 using XDA App
flonker said:
You don't have fastboot checked under power settings, do you? If so, uncheck it.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Nope, been unchecked since I have been trying to fix it.
I am totally at a loss, how do you flash from the hboot screen?
bslim11 said:
I am totally at a loss, how do you flash from the hboot screen?
Click to expand...
Click to collapse
There are essentially three methods to flashing a custom recovery on the EVO 3D with S-OFF (revolutionary method you mentioned using above).
1) Flash from normal android mode: My application works well for this, Flash Image GUI, as well as flashing kernels, especially when being away from or not having a computer available.
2) Flash through the bootloader by putting a PG86IMG.zip file on the root of your sdcard. This file with the recovery.img loaded inside is available at the TWRP site.
3) Flash through fastboot by using the following command: fastboot flash recovery c:\downloads\twrp-recovery.img
All three of these methods will load the custom recovery image into the recovery partition on a revolutionary s-off EVO 3D.
Hope that helps!
Every time I try to flash the PG86IMG.zip in my bootloader I keep getting a error that says "Main Version is older! Update fail!" I just dont get what I am doing wrong there.
It worked! Thank you so much joey krim!
bslim11 said:
Every time I try to flash the PG86IMG.zip in my bootloader I keep getting a error that says "Main Version is older! Update fail!" I just dont get what I am doing wrong there.
Click to expand...
Click to collapse
Odd. I would only expect to see this error if you're loading a PG86IMG.zip file which contains ADDITIONAL files, other than just the recovery.img.
This error is usually only present for people who used the HTC unlock method. Those who used the revolutionary unlocked method should not see this error message.
Perhaps when you stated you loaded the revolutionary recovery, you meant the revolutionary version of cwm recovery and unlocked your device using HTC's unlock method?
bslim11 said:
It worked! Thank you so much joey krim!
Click to expand...
Click to collapse
Great to hear the process worked for you. Which of the three methods ended up working best for you?
I used your app and then flashed a twrp recovery, so happy that its back to normal, it has happened to me once before, and I fixed it on my own, but nothing was working this time.
Well, I'm currently on the GSM evo 3d, ICS stock RUU with Hboot 1.53.007 and S-on (Because I can't figure out how to S-Off). I've tried all of the following scenarios in order to get CM10 to work.
1. Use smartflash from 4ext recovery and flash the CM10 zip with boot.img inside it.
2. Flash boot.img via fastboot (Fastboot flash boot boot.img) and then use smartflash from 4ext and flash the CM10 zip with boot.img in it.
3. Flash boot.img via Flash Image Gui and then use smartflash from 4ext and flash the CM10 zip with boot.img in it.
I've tried all of the above steps again without using smartflash and 4ext and rather using Clockwork Mod Recovery.
Any help is appreciated. It always loads the HTC screen, then shows the boot animation for a second or two, and then boot loops.
I'm not GSM, but on CDMA, CM10 doesn't boot on the latest hboot so maybe that's the issue. Also, I think you need s-off, but I'm not sure on this one.
Read, Search, Read again, ... Then Ask with Tapatalk 2
supaphreek said:
Well, I'm currently on the GSM evo 3d, ICS stock RUU with Hboot 1.53.007 and S-on (Because I can't figure out how to S-Off). I've tried all of the following scenarios in order to get CM10 to work.
1. Use smartflash from 4ext recovery and flash the CM10 zip with boot.img inside it.
2. Flash boot.img via fastboot (Fastboot flash boot boot.img) and then use smartflash from 4ext and flash the CM10 zip with boot.img in it.
3. Flash boot.img via Flash Image Gui and then use smartflash from 4ext and flash the CM10 zip with boot.img in it.
I've tried all of the above steps again without using smartflash and 4ext and rather using Clockwork Mod Recovery.
Any help is appreciated. It always loads the HTC screen, then shows the boot animation for a second or two, and then boot loops.
Click to expand...
Click to collapse
CDMA here, but looking at the threads... people have issues with the 1.53.007 HBOOT. You need to downgrade to the 1.49 which requires S-OFF. S-OFF is pretty easy, the wire-trick is actually pretty easy too- you can use a paperclip!
thattypicalnerd said:
CDMA here, but looking at the threads... people have issues with the 1.53.007 HBOOT. You need to downgrade to the 1.49 which requires S-OFF. S-OFF is pretty easy, the wire-trick is actually pretty easy too- you can use a paperclip!
Click to expand...
Click to collapse
I've been looking into this. Trying every possible way. I managed to change my mainver to 1.00.000.00 and then I tried to flash PG86IMG (The 1.49 hboot) but then it gives me an error after checking the zip saying "Hboot is older!" and won't let me flash it.
I've looked up the wire method, but my phone is put together differently than the one they had pictures of, so I don't know how to use that method.
supaphreek said:
I've been looking into this. Trying every possible way. I managed to change my mainver to 1.00.000.00 and then I tried to flash PG86IMG (The 1.49 hboot) but then it gives me an error after checking the zip saying "Hboot is older!" and won't let me flash it.
I've looked up the wire method, but my phone is put together differently than the one they had pictures of, so I don't know how to use that method.
Click to expand...
Click to collapse
You absolutely need S-OFF for flashing HBOOT. No way getting around it And can you post a picture of it? How is it put together differently?
supaphreek said:
I've been looking into this. Trying every possible way. I managed to change my mainver to 1.00.000.00 and then I tried to flash PG86IMG (The 1.49 hboot) but then it gives me an error after checking the zip saying "Hboot is older!" and won't let me flash it.
I've looked up the wire method, but my phone is put together differently than the one they had pictures of, so I don't know how to use that method.
Click to expand...
Click to collapse
Can you push it via fastboot? fastboot flash hboot hboot.bin
DarkRazorZ said:
Can you push it via fastboot? fastboot flash hboot hboot.bin
Click to expand...
Click to collapse
Maybe, but I've never heard anyone suggest it, so I'm leaning toward no.
Read, Search, Read again, ... Then Ask with Tapatalk 2
thattypicalnerd said:
You absolutely need S-OFF for flashing HBOOT. No way getting around it And can you post a picture of it? How is it put together differently?
Click to expand...
Click to collapse
That's kinda messed up, since I need to flash my Hboot to get s-off . I'll post a picture tonight, as the only camera I have is my Evo 3d.
DarkRazorZ said:
Can you push it via fastboot? fastboot flash hboot hboot.bin
Click to expand...
Click to collapse
The hboot file is a .nb0 file. Not bin :S
I had followed this video ht tp://w ww.youtub e.com /watch?v=hQtUxEL8pd8 and did everything correctly. When I go to boot my phone up it shows the blue android boot animation then the green HTC animation then restarts.
Hboot 1.57
Somehow my recovery got deleted.
Clockworkmod recovery is installed.
I just don't know what to do
Is there a way I can just undo everything and go back to the stock rom?
Edit: Tried ViperROM and it's doing the exact same thing.
Make sure you are wiping everything except sdcard and then flash the rom. Maybe even try changing recoveries to 4ext.
Sent from my PG86100 using Tapatalk 2
I assume you are s-off correct? I suggest going with Scotty's idea and switching to 4ext recovery. Cwm has been know to cause issues with the evo 3d. I'm also assuming that you mean hboot 1.58 not 1.57. FYI you can use any hboot with those ROMs. Just can't use the stock 2.89 kernel with any other hboot but 1.58. You also havnt specified whether or not your using the stock kernels that come with the ROM.
The meanrom by default flashes the VM kernel so if your on hboot 1.58. You have to flash the stock 2.89 kernel in the meanrom folder that's generated after you flash meanrom.
As for viperom you shouldnt have any problem flashing it considering that its compatible with any hboot. Which brings me back to my main point. Flash 4ext recovery and make sure you do a full wipe. That includes data factory wipe, cache and dalvik wipe and wipe all partitions except sdcard.
There's no reason give up when you run into a snag. There's usually a solution to every problem and you did the right thing by posting your question here. There's a ton of possibilities on here to do with your phone. Just read, research, ask questions if you are unsure of something.
Jsparta26 said:
I assume you are s-off correct? I suggest going with Scotty's idea and switching to 4ext recovery. Cwm has been know to cause issues with the evo 3d. I'm also assuming that you mean hboot 1.58 not 1.57. FYI you can use any hboot with those ROMs. Just can't use the stock 2.89 kernel with any other hboot but 1.58. You also havnt specified whether or not your using the stock kernels that come with the ROM.
The meanrom by default flashes the VM kernel so if your on hboot 1.58. You have to flash the stock 2.89 kernel in the meanrom folder that's generated after you flash meanrom.
As for viperom you shouldnt have any problem flashing it considering that its compatible with any hboot. Which brings me back to my main point. Flash 4ext recovery and make sure you do a full wipe. That includes data factory wipe, cache and dalvik wipe and wipe all partitions except sdcard.
There's no reason give up when you run into a snag. There's usually a solution to every problem and you did the right thing by posting your question here. There's a ton of possibilities on here to do with your phone. Just read, research, ask questions if you are unsure of something.
Click to expand...
Click to collapse
I'm S-on, will it matter? And also I do mean 1.57. And one more thing. Does it matter if I boot up into a recovery using the command prompt? Also I'm not sure what kernel it is. I guess the one that's in the zip folder? Also sorry for slow responses I've been working days. Any chance you'll be on tomorrow around 7pm central?
Update: I reformatted everything and tried reinstalling Viperrom through CWM but no dice still boots up and resets. Got 4ext installed. Working from there.
Update: 4EXT is the best recovery I've ever seen and I'm never using CWM again.
Update: I installed VIperROM through 4ext and it's still restarting itself.
Do you have smart flash enabled in 4ext recovery? Its under tools settings.
Jsparta26 said:
Do you have smart flash enabled in 4ext recovery? Its under tools settings.
Click to expand...
Click to collapse
No I do not. Just got off work and I'm doing it now. I don't need to have root for a custom rom do I? Also i youtubed bootloop to see if it is really what's wrong and I came up with this video. ht tp ://www .y outube.co m/watch?v=OKXTD1-fqbc and my phones doing more than that. It's booting up all the way then once the screen and dock begins to load it restarts.
IAnb3rlin said:
No I do not. Just got off work and I'm doing it now. I don't need to have root for a custom rom do I?
Click to expand...
Click to collapse
OK go ahead and turn it on. This will enable you to flash kernels inside recovery having s-on. No you don't have to root to flash a custom ROM. However every ROM has superuser baked into them so flashing one will automatically give you root.
I just want to add that s-on users do not have access to the boot partition which is where your kernel sits. Thats the cause of your bootlooping, before your recovery wasn't flashing any kernel with the ROM. Now with 4ext and smart flash its possible.
Jsparta26 said:
OK go ahead and turn it on. This will enable you to flash kernels inside recovery having s-on. No you don't have to root to flash a custom ROM. However every ROM has superuser baked into them so flashing one will automatically give you root.
I just want to add that s-on users do not have access to the boot partition which is where your kernel sits. Thats the cause of your bootlooping, before your recovery wasn't flashing any kernel with the ROM. Now with 4ext and smart flash its possible.
Click to expand...
Click to collapse
How do I flash a kernel? I'm not really sure what one is, I just know it's really important.
Think of a kernel as a airplane tower that guides the direction of how the android system operates. It controls touch screen, it contains the drivers that make your keyboard work, WiFi, 4g, camera etc.. it is also responsible for taking over android run time after hboot finishes initiating everything to get android up and running. Someone correct me if my information is incorrect please lol. For now, stick with 4ext recovery and enable smart flash under tools settings. Everything should be good after that. I would highly recommend gaining s-off to make everything easier.
If your interested just ask and I'm sure one of us will be glad to help you.
Edit: Its real easy to flash a kernel once smartflash is enabled. A kernel always comes with every ROM or else it wouldn't be able to boot up. As I have stated before in my previous post about s-on users and the limitations.
Jsparta26 said:
Think of a kernel as a airplane tower that guides the direction of how the android system operates. It controls touch screen, it contains the drivers that make your keyboard work, WiFi, 4g, camera etc.. it is also responsible for taking over android run time after hboot finishes initiating everything to get android up and running. Someone correct me if my information is incorrect please lol. For now, stick with 4ext recovery and enable smart flash under tools settings. Everything should be good after that. I would highly recommend gaining s-off to make everything easier.
If your interested just ask and I'm sure one of us will be glad to help you.
Edit: Its real easy to flash a kernel once smartflash is enabled. A kernel always comes with every ROM or else it wouldn't be able to boot up. As I have stated before in my previous post about s-on users and the limitations.
Click to expand...
Click to collapse
I formatted everything using 4ext and installed a rom i also flashed the boot img just incase and it still restarted.
Here's the steps I took.
1. Format everything.
2. Download the.zip file and copy to SD card.
3. Load the recovery and enable smartflash.
4. Installed the rom.
5. Flashed the boot.img
6. Also tried without flashing the boot img.
And just to clarify. I'm installing ViperROM. And I only need the .zip file, correct?
I ended up using RUU to fix it and go back to the stock rom/ect, Then locked the bootloader unlocked it and flashed superuser and rooted it then got s-off using the wire trick. But after I rebooted it keeps taking me back to the jbear bootup logo and when I try to flash a recovery it doesn't load I just get the htc logo then jbear logo then it restarts. I followed this guide.htt p://w ww.yo utube.co m/ watch?v =tRj47iFQvbE I found here on the xda forums.
Do you have the ics ruu correct? Boot back into bootloader and reflash the ruu. Do not unlock your bootloader again. Its not necessary anymore now that you have s-off.
Jsparta26 said:
Do you have the ics ruu correct? Boot back into bootloader and reflash the ruu. Do not unlock your bootloader again. Its not necessary anymore now that you have s-off.
Click to expand...
Click to collapse
Booted up perfectly . So now I'm ready to flash any cdma rom with no problems? Do you know if there's a cdma rom that comes with, beats, adobe flash, and extras?
When I tried to flash a recovery this happened.
C:\android-sdk\platform-tools>fastboot flash recovery 4ext.img
sending 'recovery' (3738 KB)...
OKAY [ 1.018s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.031s
Also my bootloader is saying *** locked ***
IAnb3rlin said:
Booted up perfectly . So now I'm ready to flash any cdma rom with no problems? Do you know if there's a cdma rom that comes with, beats, adobe flash, and extras?
When I tried to flash a recovery this happened.
C:\android-sdk\platform-tools>fastboot flash recovery 4ext.img
sending 'recovery' (3738 KB)...
OKAY [ 1.018s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.031s
Also my bootloader is saying *** locked ***
Click to expand...
Click to collapse
Your s-off. If you have root you can flash your recovery from 4ext updater or use flash GUI image from Google play. If no root, you will need to take your recovery and Rename it to PG86IMG, place it on root of sdcard and boot into bootloader. Let the phone pick up the recovery update and flash it. Power up your phone and take the file off the root of your card. Then power back down into bootloader and click on recovery. Let me know if it works.
Jsparta26 said:
Your s-off. If you have root you can flash your recovery from 4ext updater or use flash GUI image from Google play. If no root, you will need to take your recovery and Rename it to PG86IMG, place it on root of sdcard and boot into bootloader. Let the phone pick up the recovery update and flash it. Power up your phone and take the file off the root of your card. Then power back down into bootloader and click on recovery. Let me know if it works.
Edit: just realized your using virgin mobile correct? I believe the reason your phone kept bootlooping with viper ROM was because of hboot. Try flashing a different hboot with the same method as the ruu and recovery.
Click to expand...
Click to collapse
I downloaded root checker and apparently I'm not root anymore. Yes I'm VM. I'm trying to rename the recovery and update it using the SD card now.
I tried changing the name and it won't detect it. Do I rename the img file or use a zip file? For the RUU I used the pc program to update it and the recovery I use fastboot in the cmd prompt. How do I flash a different hboot? Would I be able to use fastboot for the recovery if i reunlocked the boot loader?
IAnb3rlin said:
I tried changing the name and it won't detect it. Do I rename the img file or use a zip file? For the RUU I used the pc program to update it and the recovery I use fastboot in the cmd prompt. How do I flash a different hboot? Would I be able to use fastboot for the recovery if i reunlocked the boot loader?
Click to expand...
Click to collapse
My bad. Yes, get the zip file version. As for hboot, same way your trying to flash the recovery.
Jsparta26 said:
My bad. Yes, get the zip file version. As for hboot, same way your trying to flash the recovery.
Click to expand...
Click to collapse
When I tried to update it said Invalid model ID update failed. For the PG86IMG file.
IAnb3rlin said:
When I tried to update it said Invalid model ID update failed. For the PG86IMG file.
Click to expand...
Click to collapse
OK, get latest twrp recovery zip and do the same thing you tried with 4ext. I know, its a pain in the ass. I had to go through the same thing when I got my phone s-off with wire trick. The reason why I'm having you do this this way is because in case you ever need to have your phone serviced. They will check to see if you unlocked your bootloader or relocked it. Your bootloader is in "locked" state thus, they cannot deny you service regardless of s-on or s-off.
Jsparta26 said:
OK, get latest twrp recovery zip and do the same thing you tried with 4ext. I know, its a pain in the ass. I had to go through the same thing when I got my phone s-off with wire trick. The reason why I'm having you do this this way is because in case you ever need to have your phone serviced. They will check to see if you unlocked your bootloader or relocked it. Your bootloader is in "locked" state thus, they cannot deny you service regardless of s-on or s-off.
Click to expand...
Click to collapse
I just ended up unlocking the boot loader again and installing the recovery that way. Then saw this.. oh well lol. I really do appreciate the help. . I'm going to try to install viperrom again, and double backup this time! I'll let you know how it goes.
I've been trying to root my EVO 4G LTE using various guides from this board, and I'm not having a lot of luck. I have HBOOT 2.09 and it's S-ON. It seems like the easiest way to root the device is to go S-OFF, but then it appears that the device needs to be rooted to get S-OFF. So I'm a little confused at this point. I've unlocked the bootloader and installed TWRP, but when I try to install the SuperSU root utility it gives me an error about mounting partitions and fails. My bootloader screen also displays "TAMPERED" which seems to be a problem but I'm not having a lot of luck finding a way to resolve it.
So... can anyone tell me what my next step is?
Thanks in advance.
Are you using Facepalm, Moonshine, or DirtyRacun? You haven't really provided enough details to help, at this point. What's your software version? I assume you're running the stock ROM?
I was running the stock ROM, I think it was 3.16. I tried using Facepalm but again it seems like it needs root to work which I haven't been able to achieve just yet. I tried installing the ROM from this thread through TWRP but it just hangs on the HTC screen so I'm not sure what's on there now. I can still get into the bootloader and recovery though.
You can't use Facepalm on 3.16 software. Use Moonshine.
Try flashing this stock rooted to get back to a working state: http://d-h.st/users/Captain_Throwback/?fld_id=10308#files
You may need to fastboot flash the boot.img to make sure it fully boots.
OK, I downloaded that ROM and extracted the boot.img. I booted the phone into the bootloader and ran "fastboot flash boot boot.img". It seems to have completed correctly, no errors at least, but now the phone just sits at the HTC screen with the red text at the bottom. Clearly I'm doing something wrong...
Did you flash the ROM too? Or did it reboot on you when you tried?
I just did the boot.img. Should I also do "fastboot flash zip 3.16.651.3_stock_rooted_odex_CPTB.zip"?
davel23 said:
I just did the boot.img. Should I also do "fastboot flash zip 3.16.651.3_stock_rooted_odex_CPTB.zip"?
Click to expand...
Click to collapse
You have to flash the ROM in recovery.
Ok, so I went into recovery which is still TWRP, adb pushed that ROM to the phone then tried to install it. It gives a bunch of error messages about being unable to mount various items, says it's unable to find path for partition [name of the zip] and fails.
Thanks for your help and patience so far...
You do not extract the file, leave it as a zip and do not open it. Move it to your SD card while in fastboot (mount sd) and from there use twrp and select the correct zip to flash. But above all... DO NOT EXTRACT THE FILR
Sent from my EVO using xda app-developers app
roscoepcoltra said:
You do not extract the file, leave it as a zip and do not open it. Move it to your SD card while in fastboot (mount sd) and from there use twrp and select the correct zip to flash. But above all... DO NOT EXTRACT THE FILR
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
He's S-on. He can't flash kernels from recovery with Hboot 2.09.
davel23 said:
Ok, so I went into recovery which is still TWRP, adb pushed that ROM to the phone then tried to install it. It gives a bunch of error messages about being unable to mount various items, says it's unable to find path for partition [name of the zip] and fails.
Thanks for your help and patience so far...
Click to expand...
Click to collapse
I don't understand what you're doing here. Boot to recovery, mount storage, copy the ROM zip over, and then flash it.
Ok, so I mounted storage from recovery, or least I tried to, my PC said it needed to be formatted. So I did so, copied the file over and flashed it which completed successfully this time. My phone now boots properly, I'll give Moonshine a try now. Hopefully I won't need to bug you again, thanks for all the help.
Captain_Throwback said:
You can't use Facepalm on 3.16 software. Use Moonshine.
Try flashing this stock rooted to get back to a working state: http://d-h.st/users/Captain_Throwback/?fld_id=10308#files
You may need to fastboot flash the boot.img to make sure it fully boots.
Click to expand...
Click to collapse
my friend wants to buy im rooted unlocked evo. it is on viper now can I flash this an it will be stock rooted ?
Tigerstown said:
my friend wants to buy im rooted unlocked evo. it is on viper now can I flash this an it will be stock rooted ?
Click to expand...
Click to collapse
Yes.
Captain_Throwback said:
Yes.
Click to expand...
Click to collapse
S-on Ok? Or do I need to moonshine first?
Tigerstown said:
S-on Ok? Or do I need to moonshine first?
Click to expand...
Click to collapse
You need to use Flash Image GUI or fastboot flash the kernel.
FinZ28 said:
You need to use Flash Image GUI or fastboot flash the kernel.
Click to expand...
Click to collapse
Ok I got that app I use that. An for my other one I'm selling is s-off so I can just flash this on that one..it's been fun on the Evo with the helpful fellow xda's on the jewel. But the wife's work now cover half your bill if you have verizon so we had no choice
Captain_Throwback said:
Yes.
Click to expand...
Click to collapse
Omg I just moonshine(easy thing I ever did) this phone my wife didn't want s-off before. So now I'm s-off I will just flash thanks once again throwback. Hope there is someone in vzw htc one thread that breaks down firmware like you.
Sent from my EVO using XDA Premium 4 mobile app
I'm having a little trouble with Moonshine. It reboots the phone a couple of times, gets to step 3 then just keeps printing periods in the program window. I've been reading through the Moonshine thread and it seems other people have had the same problem, but I haven't seen a solid fix yet. Anyone know what I need to do or should I stick with the Moonshine thread?
Please help. I have unlocked this phone through HTC Dev. I have flashed a custom recovery. Somewhere through this process, the original installation of the factory rom from VM was deleted. That doesn't bother me because I was never going back to it anyway, but If I had it right now, I wouldn't be here. I have tried to use the RUU exe in fastboot and the RUU zip in recovery from here. Neither will install, exe throws errors and the zip returns [bad]. I have also tried the [ROM] NegaLite-BluRom-JCFunk | 2.95 | Sprint/VM | Sense/Apex/Nova | 03/25/2014. This eventually installed, but will not boot even with installing boot.img separately. I followed all directions to the best of my ability, but by no means am I saying I did correctly, but I am pretty sure I did. So to recap - I have whats in the title, but no rom whatsoever installed that can be accessed. Any takers?
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Or if you have a copy of the custom recovery img file on your computer, you can do a fastboot command that will let you boot from it and give it full write access.
fastboot boot recovery.img, then you can retry to flash negalite
img must be in directory you use fastboot in.
Philz recovery not working well for 3d, I use 4ext or my unofficial twrp.
Before I proceed in explaining anything, please let me Thank You JCFunk for lending me a hand in my endeavors. This is my first crack at a HTC device. So I'm a newb at locks, hboots, and HTC specifics. So, Thank You!
I scanned through a lot of information and I moved to quickly, thinking I would ace this project and not particularly following a guide step by step. I know I should just wire trick this phone. I am wanting to get to hboot 1.40 and use Revolutionary to S-OFF. Once that is achieved load a kitkat rom. This is just a project, not used for daily phone use - no service.
jcfunk said:
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Click to expand...
Click to collapse
I tried this step first and it returned:
Main Version is older.
Update Fail!
Press <POWER> to reboot.
Would I be correct to say if I flashed the SetMainVersionLOW.zip that this method would likely work?
Also, if I am overcomplicating this(other than wire-trick) and there is an easier method, please advise.
oD33z said:
Before I proceed in explaining anything, please let me Thank You JCFunk for lending me a hand in my endeavors. This is my first crack at a HTC device. So I'm a newb at locks, hboots, and HTC specifics. So, Thank You!
I scanned through a lot of information and I moved to quickly, thinking I would ace this project and not particularly following a guide step by step. I know I should just wire trick this phone. I am wanting to get to hboot 1.40 and use Revolutionary to S-OFF. Once that is achieved load a kitkat rom. This is just a project, not used for daily phone use - no service.
I tried this step first and it returned:
Main Version is older.
Update Fail!
Press <POWER> to reboot.
Would I be correct to say if I flashed the SetMainVersionLOW.zip that this method would likely work?
Also, if I am overcomplicating this(other than wire-trick) and there is an easier method, please advise.
D33z
Click to expand...
Click to collapse
How good are you with linux, or do just use windows? Never did wire trick myself, I've always done Unknownforce hboot downgrade. Which I can now do in about 15 min.
s-off not required, there's many way to bypass unlocked limitations.
Your main var is to high because htc never released a current ruu, so the ota pushed version higher but no ruu to match.
what can I help you do?
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Philz recovery not working well for 3d, I use 4ext or my unofficial twrp.
Click to expand...
Click to collapse
Does your unofficial twrp support SELinux? I am assuming it does but just checking. Is it available for download and if so where?
oD33z said:
Does your unofficial twrp support SELinux? I am assuming it does but just checking. Is it available for download and if so where?
Click to expand...
Click to collapse
here's the thread
http://forum.xda-developers.com/showthread.php?t=2831444
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
How good are you with linux, or do just use windows? Never did wire trick myself, I've always done Unknownforce hboot downgrade. Which I can now do in about 15 min.
s-off not required, there's many way to bypass unlocked limitations.
Your main var is to high because htc never released a current ruu, so the ota pushed version higher but no ruu to match.
what can I help you do?
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
I am great with linux, but was under the assumption it needed to be burned to cd and that USB was not an option, please advise if not the case. I have read a ton and I remember reading about Unknownforce, but cant remember if thats the case or not.
Off topic: I learned from you that it has to be locked to go stock, but does it need to be unlocked to flash your rom or locked as well?
Unlocked for custom, locked for stock.
Here is unknownforce ultimate tool,
there was a live cd version made for windows users scared of linux.
I use tiny core linux for this, Ubuntu tries to mount all the partitions and you only have a 5 second window when they are writeable. I have used Ubuntu, at first, but preferred tinycore.
But first you are going to need to get stock.zip to install.
http://forum.xda-developers.com/showthread.php?t=1653777
I would do fastboot boot recovery.img
Then install negalite, so atless you can boot the phone
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
---------- Post added at 12:37 AM ---------- Previous post was at 12:24 AM ----------
here is 4ext recovery I would use this one first until you get used to things, best recovery for 3d.
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Is 4ext > TWRP unofficial? I am currently on your unofficial TWRP and installing the latest negalite.
oD33z said:
Is 4ext > TWRP unofficial? I am currently on your unofficial TWRP and installing the latest negalite.
Click to expand...
Click to collapse
did you fastboot boot?
There are several custom recoveries out there.
Here is thread for 4ext
http://forum.xda-developers.com/showthread.php?t=1408936
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
What I meant was, in your opinion, is the 4ext a better recovery than the unofficial TWRP?
During the install of Negalite at the point of -Setting Up Kernel Over-Clock Settings
under this it reads: assert failed: write_raw_image("/tmp/newboot.img","boot")
Is this a red flag of something not going right in any way?
After this I click Next>Recovery>Wipe Dalvik>Reboot and it boots into Fastboot. Whats happening at this point?
Since I am basically starting from scratch and the end goal is to have a kitkat rom and possibly S-OFF(if its a must to do so).
What all needs to be done as far as formatting, tweaks, or anything else to achieve the best performance, space, or anything you can think of?
Thats if you dont mind sharing. I appreciate your time and if I can be of service to you in any way, I will.
I am currently on the 4ext recovery with 1GB sd-ext 0 swap and formatted Ext4.
fastboot boot recovery.img
flashrom.zip from recovery
reboot, wipe dalvik, reboot
Negalite.zip installed with no errors whatsoever.
Thank You.
Beautiful smooth running rom btw.
Does all that above sound like I did the right things as for setting up and installing?
4ext is most stable, the unofficial has new features like f2fs and selinux, but 95% stable.
fastboot boot recovery.img is an old work around, also used to flash boot.img with fastboot. That is ok with roms that include a whole boot.img but roms like mine use a dynamic boot.img. Basically the installer makes the boot.img using your choices.
From what I know about Kitty kat I think you need to downgrade hboot or be s-off. Not sure I've stayed on ics for stability because I still use this phone. Also there is a new version of negalite on svn, just takes hours for me to upload a zip version.
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Revision 7
Are you sure this is the latest?
oD33z said:
Revision 7
Are you sure this is the latest?
Click to expand...
Click to collapse
Lol, yes since I updated it a few weeks ago
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
I should have worded that different really, the revision numbers threw me, I honestly was just making sure I was in the right place. 48mb smaller, anything stripped?
jcfunk said:
Some more info please, hboot version? Which recovery. s-on makes things harder.
To flash stock need to be relocked, stock will not flash from recovery.
If you put rom.zip, stock zip, in root of sdcard and rename to PG86IMG.zip. hboot will flash automaticly.
Or if you have a copy of the custom recovery img file on your computer, you can do a fastboot command that will let you boot from it and give it full write access.
fastboot boot recovery.img, then you can retry to flash negalite
img must be in directory you use fastboot in.
Click to expand...
Click to collapse
I tried installing your new negalite the same way as I do the old version and at the end of the install procedure I get an error about set permissions. After that - reboot, wipe dalvik, reboot - it just reboots into recovery. I tried many times with SmartFlash enabled and disabled. I go back and install r121 with no problems.
oD33z said:
I tried installing your new negalite the same way as I do the old version and at the end of the install procedure I get an error about set permissions. After that - reboot, wipe dalvik, reboot - it just reboots into recovery. I tried many times with SmartFlash enabled and disabled. I go back and install r121 with no problems.
Click to expand...
Click to collapse
Here. Try this
https://www.androidfilehost.com/?fid=23578570567720169
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer