[Q] Stock 4.2.2 for i9100 ?? - Galaxy S II Q&A, Help & Troubleshooting

Hi there.
Recently I read about the official update to version 4.2.2 for i9105 (Galaxy s2plus), which is not that much differ from the i9100. Since I care about possibilitie to connect my phone to TV and listen to FM radio, I was looking for ROM based on the official SAMY ROM. Does anyone found this, or is able to cook/port?
Or, is there a 4.2 / 4.3 ROM that has these features?

pijMleko said:
Hi there.
Recently I read about the official update to version 4.2.2 for i9105 (Galaxy s2plus), which is not that much differ from the i9100. Since I care about possibilitie to connect my phone to TV and listen to FM radio, I was looking for ROM based on the official SAMY ROM. Does anyone found this, or is able to cook/port?
Or, is there a 4.2 / 4.3 ROM that has these features?
Click to expand...
Click to collapse
wrong section of the forum to ask such a question..
anyways i9100 and i9105 are two completely different sets of hardware so do not expect any such 4.2.2 official samsung firmware for i9100..
since you dont know anything about soc's (i assume) its better you stay with the official 4.1.2 firmware so as to enjoy mhl and fm radio..

Related

Can I root + flash rom to Galaxy S II LTE I9210 ?

Is it possible to treat the I9210 just like the I9100, and root , flash cm9/10 into it?
I'm not a S II user, I use galaxy note, but planning to get a small one, and the I9210 is one of my preference.
check here for more info if you want it.
SGS2 GT-i9210 - Development
Official Galaxy S2 LTE international ICS ROM now rolling out
Galaxy SII LTE Europe version; GT-I9210
xecut said:
Is it possible to treat the I9210 just like the I9100, and root , flash cm9/10 into it?
I'm not a S II user, I use galaxy note, but planning to get a small one, and the I9210 is one of my preference.
Click to expand...
Click to collapse
If you are asking if it is possible to flash the CM9/10 ROM for the I9100 on to the I9210 the answer is no.
If you are asking if it is possible to flash CM9/10 on to the I9210 or I9210T the short answer is yes, there is info for the international version (I9210) in the link therethere provided for you, if you are after one for the I9210T (Telstra Australia 4G version) (I notice you are from Australia ) it is a modified version of the Skyrocket or I727 ROM (not sure which) and has the custom kernel already in it and you can check the thread on it here: http://forum.xda-developers.com/showthread.php?t=1593061.
There are links in there for CM9 and 10, and also ported versions of Sky ICS and Embryo 5.0/5.1 which are based on TouchWiz (you need to also flash the custom-made Dreamkernel [thanks to Tallustus] after you flash the ROM for SkyICS and Embryo - Not needed for CM9/10 though).
Hope this helps
xecut said:
Is it possible to treat the I9210 just like the I9100, and root , flash cm9/10 into it?
I'm not a S II user, I use galaxy note, but planning to get a small one, and the I9210 is one of my preference.
Click to expand...
Click to collapse
When the **** you guys will understand that double posting isn't allowed
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
h4ck3rc1 said:
If you are asking if it is possible to flash the CM9/10 ROM for the I9100 on to the I9210 the answer is no.
If you are asking if it is possible to flash CM9/10 on to the I9210 or I9210T the short answer is yes, there is info for the international version (I9210) in the link therethere provided for you, if you are after one for the I9210T (Telstra Australia 4G version) (I notice you are from Australia ) it is a modified version of the Skyrocket or I727 ROM (not sure which) and has the custom kernel already in it and you can check the thread on it here: http://forum.xda-developers.com/showthread.php?t=1593061.
There are links in there for CM9 and 10, and also ported versions of Sky ICS and Embryo 5.0/5.1 which are based on TouchWiz (you need to also flash the custom-made Dreamkernel [thanks to Tallustus] after you flash the ROM for SkyICS and Embryo - Not needed for CM9/10 though).
Hope this helps
Click to expand...
Click to collapse
All i know is that there isnt a dedicated rom for i9210.
You can use the roms avaiable for Skyrocket one, but my experience is that is too buggy. No keys working (some workarounds for this are avaible), issues on 4G, camera, etc.
The phones are slighty different so...

[Q] custom kernels for galaxy s3

hi all,
i have recently rooted my device and want to install a custom kernel.
the problem is that I am running the latest firmware for the galaxy s3 in the U.K (I9000XXELLA)(android 4.1.2). and because of this I cant find out what custom kernels are compatible and which aren't. so it would be a great help if you could help me by...
1. is the ninphetamin3 kernel compatible with my firmware
2. what other kernels are there that are compatible which allows you to over clock the CPU of your device
thanks in advance for any answers and suggestions you may post and looking forward to hearing from you .
bevan11 said:
the problem is that I am running the latest firmware for the galaxy s3 in the U.K (I9000XXELLA)(android 4.1.2). and because of this I cant find out what custom kernels are compatible and which aren't.
Click to expand...
Click to collapse
Uhm, what? I don't see that problem at all. You have an I9300? All the kernels from this forum section are compatible. Some of them are for samsung-based ROMs like yours, some for CM-based. It says it in the first post.
thanks but what i meant was what kernels are compatible with my firmware because some are only for ICS and I want to know what kernels are compatible on my firmware and I am not sure if the ninphetamin3 kernel is compatible with jelly bean.
All current kernels are compatible with JB AFAIK. Nimphetamine is outdated and doesn't support JB.
Siyah or Perseus would be real good bets...

I717 Roms on T879?

Is there any way to get the new 4.2.2 i717 Roms on T879 (Native Tmo Galaxy note)
i know in 4.1.2 There was a wifi fix which made i717 roms compatible with T879 but that was 4.1.2 it doesnt work for 4.2.2
Can anyone help me out with this or help create a solution? T879 doesnt get any updates
MarcoYbanez said:
Is there any way to get the new 4.2.2 i717 Roms on T879 (Native Tmo Galaxy note)
i know in 4.1.2 There was a wifi fix which made i717 roms compatible with T879 but that was 4.1.2 it doesnt work for 4.2.2
Can anyone help me out with this or help create a solution? T879 doesnt get any updates
Click to expand...
Click to collapse
I would like to know what needs to be done to do this as well
:good:
Follow this thread to install ICS on your phone:
http://forum.xda-developers.com/showthread.php?p=36978884
Then follow JamieD's thread to install 4.2/CM 10.1.
rangercaptain said:
Follow this thread to install ICS on your phone:
http://forum.xda-dewris.com/showthread.php?p=36978884
Then follow JamieD's thread to install 4.2/CM 10.1.
Click to expand...
Click to collapse
That doesn't seem to answer my question though. Stock on my phone is T-Mobile ICS 4.04 and is the galaxy note made for T-Mobile.
*My problem is not being able to flash 4.2.2 ROMs (such as jelly beer 4.2.2 , etc.) Because it was made for AT&T i717.
The first link tells you how to "convert" your phone to at&t stock ICS by extracting and replacing the boot.IMG file, except you are doing the opposite ROMs. The second link is to the most current JB based ROM, but it looks like without a current boot.IMG from a T-Mobile ROM you are at a dead end.
So, in my opinion, you can't yet. I saw they have CM10 over there. What could a close-fitting CM10.1 have for you that a native CM10 doesn't have?
rangercaptain said:
Follow this thread to install ICS on your phone:
http://forum.xda-developers.com/showthread.php?p=36978884
Then follow JamieD's thread to install 4.2/CM 10.1.
Click to expand...
Click to collapse
:good:

[Q] Moving from i9100 to i9100G (chinese)..common doubts

HI guys,
Due to an undesired dead of my previous i9100, i'm probably switching to a i9100G, which I'll get borrowed from a friend for a few months. It's 100% the chinese model.
After a bit of checking, I've found that it's not an Exynos model. Does this mean i9100G gets official full CM10.1 support? TI chipsets have all the source available, right?
If I want to install ROMs, any CWM ROM for i9100G will work, right? The ones I can't flash will be official samsung roms for i9100G international, right?
Thank you!
timonoj said:
HI guys,
Due to an undesired dead of my previous i9100, i'm probably switching to a i9100G, which I'll get borrowed from a friend for a few months. It's 100% the chinese model.
After a bit of checking, I've found that it's not an Exynos model. Does this mean i9100G gets official full CM10.1 support? TI chipsets have all the source available, right?
If I want to install ROMs, any CWM ROM for i9100G will work, right? The ones I can't flash will be official samsung roms for i9100G international, right?
Thank you!
Click to expand...
Click to collapse
YES, its TI-Omap processor on that I9100G for u.And all Custom rom's meant for I9100G will wrk on it
This is great news! I couldn't find the official thread for CM10.1 for the i9100g, could you point it for me? I'm mostly interested in a JB vanilla experience, maybe with a modification to allow the camera to store pics in the SD and also allow mass storage, but that would be it. Oh, and stability...I had so many crashes with my i9100 on CM10.1, and camera/3D issues. Do you have any recommendation?
Thanks a lot!
EDIT: Huh, nevermind, now I found the CM10.1 thread. Still, any good vanilla recommendation besides CM10.1?
EDIT2: Another question better to ask to wiser people: I'm going to receive this 9100g running android stock 2.3.x chinese version, how could I change to international JB bootloader?
timonoj said:
This is great news! I couldn't find the official thread for CM10.1 for the i9100g, could you point it for me? I'm mostly interested in a JB vanilla experience, maybe with a modification to allow the camera to store pics in the SD and also allow mass storage, but that would be it. Oh, and stability...I had so many crashes with my i9100 on CM10.1, and camera/3D issues. Do you have any recommendation?
Thanks a lot!
EDIT: Huh, nevermind, now I found the CM10.1 thread. Still, any good vanilla recommendation besides CM10.1?
EDIT2: Another question better to ask to wiser people: I'm going to receive this 9100g running android stock 2.3.x chinese version, how could I change to international JB bootloader?
Click to expand...
Click to collapse
Apart from CM10.1 u have AOKP rom for it and also RootBox rom which is a mix of AOKP + cm10.1 +PA (paranoid Android) for u.
as for as stock JB is concerened u can always find one @ www.sammobile.com
Sun90 said:
Apart from CM10.1 u have AOKP rom for it and also RootBox rom which is a mix of AOKP + cm10.1 +PA (paranoid Android) for u.
as for as stock JB is concerened u can always find one @ www.sammobile.com
Click to expand...
Click to collapse
Thanks for the info! HOwever my concern isn't about finding an international JB ROM. I think there needs to be some kind of previous flash in order to make it work on a 9100G chinese version. Is this correct?
Thank you!
timonoj said:
Thanks for the info! HOwever my concern isn't about finding an international JB ROM. I think there needs to be some kind of previous flash in order to make it work on a 9100G chinese version. Is this correct?
Thank you!
Click to expand...
Click to collapse
previous flash of what
Not sure, that's my concern. I believe you can't just odin your way to international stock JB from a chinese stock ROM, you'll need a way to turn your 9100G international (I guess it's related with some kind of tag string in the bootloader or similar).
timonoj said:
Not sure, that's my concern. I believe you can't just odin your way to international stock JB from a chinese stock ROM, you'll need a way to turn your 9100G international (I guess it's related with some kind of tag string in the bootloader or similar).
Click to expand...
Click to collapse
May be the guide link below on the same would be of some help to u
[GUIDE]Switch between Chinese I9100G & international I9100G SafeWay
YEah, this is what I think I saw last time, I'll ask there! Thanks a lot!

[Q] Updating Galaxy Ace III (GT-7275R) to 4.3 Help

Hi,
I have just purchased a Wahoo Fitness Bluetooth 4 device to use with my Galaxy Ace 3. I believe that the Ace has bluetooth 4 capability (all of the specs that i see for it show that it does have BT 4.0), but im starting to think that i need to update from the current version of 4.2.2 to 4.3 in order to get it to work.
I don't want custom ROM or anything like that to be honest, but it appears that my network (EE uk) are not rolling out updates for this phone to get it on to 4.3 or higher.
Is there any way i can get a 4.3 vanilla rom onto this phone?
Thanks
Mark
mtrueman said:
Hi,
I have just purchased a Wahoo Fitness Bluetooth 4 device to use with my Galaxy Ace 3. I believe that the Ace has bluetooth 4 capability (all of the specs that i see for it show that it does have BT 4.0), but im starting to think that i need to update from the current version of 4.2.2 to 4.3 in order to get it to work.
I don't want custom ROM or anything like that to be honest, but it appears that my network (EE uk) are not rolling out updates for this phone to get it on to 4.3 or higher.
Is there any way i can get a 4.3 vanilla rom onto this phone?
Thanks
Mark
Click to expand...
Click to collapse
You seem quite confused on what constitutes a custom rom. If you're trying to replace the stock Samsung software with vanilla android - that's about as custom as you can get without replacing android with a different operating system. But there are no official updates to 4.3 for your phone, so the only way to upgrade would be via a custom rom like CyanogenMod.

Categories

Resources