Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis
teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.
andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis
teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis
Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545
slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4
Related
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
debinnv said:
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
Click to expand...
Click to collapse
What is the status of your Photon currently? Assuming it is rooted and unlocked, running what rom? Please provide info on what rom you are on now, which one you flashed from, and what process you used to get where you are. The more info provided the easier it will be to help.
Well lets see, currently I am back on stock, but here is what I did. I rooted, unlocked, installed CWM 5.0.2.7 I also flashed jokers recoveryv3 ( I follow QB's videos) So then I installed the gummy rom using this process. Format system, format data, format cache, wipe cache then dalvik cache. flash rom, flash rom again ( now I did not reboot into recovery after I flashed the rom the first time) I just went straight to install rom again. flash gapps, fix permissions. Reboot up and good loving it all. Waited 15 min then rebooted again. That's it. So I am at a loss. Thanks for help if you need any other info please let me know.
Oh I am on 2.3.4 with 198_7 also
In your system settings did you have "home only" or "automatic" selected for your roaming settings? For a lot of these roms, "automatic" is forced roam. And then if you didn't have roaming data enabled, that would explain why you were constantly roaming with no data.
Sent from my MB855 using XDA
Thanks so much .
I did have automatic checked but I did have roaming data enabled also. I flipped it around too with home only. I am truly beginning to think my phone is just plain "off " who knows. It's a shame though, I mean not that stock is bad on this phone but the custom roms are so much better imo. This is the first phone I have ever had a problem with. I have been flashing phones for years. Think I started with a HTC Mogul. That was a solid phone LOL
Does CM7 work for you? If it does then I reckon flashing that and setting it up, then instead of doing a full wipe keep your data and flash CM9 based rom over it, fix permissions and take it from there.
I have not tried CM7 but I can, sure can't hurt to try at this point. Thanks, I will give that a try tomorrow.
Have you tried *#*#4636#*#*? Sometimes flashing changes the radio in that menu. Be careful though, changing something can really Bork your phone. It should be on cdma prl I think
sent from my CM7 MoPho
Deb, my photon has never been kind to me with the 'flash twice' method. It always results in no data. Try cm9 again, but this time wipe cache, system, data, and dalvik, install version 3.1 of cm9, boot into it, reboot to recovery, wipe cache and dalv, then install the latest cm9 version. Always works for me. Good luck
Sent from my MB855 using XDA
Morning all, your all are great. Okay so I am ready to start again. I'm at stock right now so I need to get her all set up again. (Yes my phone is a she) Acvice, I am going to try your method first will let you know in a bit.
Looks like joker's site may be down so I need to try and find the 2 cm9 roms
I have this rom saved already on my computer
beta-0.6.9.1-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed.zip
Wonder if I should try that one or just wait
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
debinnv said:
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
Click to expand...
Click to collapse
You don't have to, but I recommend it.
Sent from my MB855 using XDA
I think th3bill has 0.3.1 in his fixes thread
http://www.mediafire.com/?y7no1r460d4o8zf
sent from my CM7 MoPho
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
debinnv said:
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
Click to expand...
Click to collapse
Glad someone provided you with that 3.1 link. Looking forward to see if it works out for ya.
By the way, you will know it worked if when you boot up in 3.1 you have working data. Flashing the newer version after that will essentially just update everything.
Deb, I take it the flash of 0.3.1 didn't work? Did you have data and then lose it when you flashed 0.6.9.3? What were your exact steps. I just rooted/unlocked and flashed my f-in-law's new photon and it worked just fine. Lemme know what you did and maybe I can help more
sent from my CM7 MoPho
Thanks bullfrog that's nice of you but honestly I'm good now As you know.
I didn't even try to install 0.3.1. I kept thinking about it, seeing I had no luck with 2 others previously so I decided to go the MIUI route and I'm a happy camper with that one. I am a flashaholic for sure, as we all are here. I am thinking though, I am gonna just be happy with where I am at for now. Of course I will most likely decide to give another rom a try at some point.
Of course I am already eyeing a few Samsung Epic touch's on ebay. I hear that one can be a brick just waiting to happen....weeeee I am having way too much fun
I'm glad you made it to MIUI. if you ever want to try cm9 or and of the similar ones (aokp, gummy, paranoid) I would suggest flashing that 0.3.1 first, then updating to the latest cm9, then flashing the variant
sent from my CM7 MoPho
So the other day my S3 gave up the ghost, and developed the hard-brick "QHSUSB_DLOAD" error. I have insurance so I was overnighted a new phone, and am sending the old one away. I believe this was related to a long-term power button issue I was having, perhaps a virus, or something. I had not changed anything to the ROM I was using since about October, and the issue just happened now in May.
At any rate, the new S3 I received is an MJB version, Android 4.3, Knox and all that other good stuff. After several failed attempts, I found a method to root this phone and disable Knox. The Warranty Bit is already tripped, so clearly I'm not sending this phone back until it hard bricks as well. I am trying to install the StockMOD ROM that is very popular, however I am being plagued by problem after problem.
I was able to flash a version of CWM Recovery onto my phone, but it was too old and couldn't mount any of the folders. Using ROM Manager, I was able to flash an update to my Recovery, and now it mounts and views all folders properly. However, when I go to install the StockMOD ROM, I continuously get a Status 7 error, something about "expects 5 args, got 3." I wiped the data, cache, and Dalvik, but kept getting this error. So, I had to recover my backup of stock, which didn't go well either. Once my backup was installed, all of my apps kept crashing. Gapps, ROM Manager, everything kept giving me constant FC errors. I had to wipe my data, cache, and Dalvik again and go back to factory default, and reinitialize the phone. Luckily I haven't installed anything of importance on here yet.
A quick search through here states that I need to use TWRP as my Recovery. I've flashed TWRP several times, first using the 2.6... version and then the most recent 2.7.0.0 version, and neither of these will mount any of my folders. It just gives me a litany of errors trying to mount the various locations. I've done Fix Permissions and everything else, TWRP will just NOT mount anything. Other folks say I need the latest PhilZ Recovery. I've downloaded the latest PhilZ Touch 6 and flashed it via Odin. It is giving me the same errors as regular CWM, Status 7, "expecting 5 args, got 3."
I don't know what else to do. My S3 that ran Android 4.0 was so much easier. I had that thing rooted and running a TW based ROM with Nova launcher in about 30 minutes. This phone has been a disaster since I turned it on. I'm just trying to get a 4.3 TW based ROM. I like the Samsung Camera, Calendar, Clock, Messaging, and Contacts apps far better than AOSP versions. But I also want much more customization to my notification drawer toggles. Stock TW doesn't have the toggles I use frequently like the data toggle as well as the torch toggle.
I don't know what I'm doing wrong, because unlike a lot of folks out there, once I find a ROM I like, I stick with it. I'm not constantly updating, changing, or searching for the newest version of Android. There's nothing wrong with that, it just isn't my cup of tea. So does anyone know what I need to do? At this point, I'm about to just give up and use Nova over top of rooted stock TW and call it a day.
Thanks!
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
nosphor said:
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
Click to expand...
Click to collapse
Everything is stock except the recovery. I'm using CWM 6.0.4.7 with PhilZ Touch 6. I'm still using the stock TW 4.3 ROM that shipped with the phone. The only exception is that I'm rooted now.
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
nosphor said:
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
Click to expand...
Click to collapse
Unfortunately, I've heard that it is not possible to revert to anything prior to 4.3 once a phone comes factory installed with 4.3, due to all of the security enhancements and etc. My kernel, modem, and baseband are all factory stock 4.3 MJB. Everyone else on the boards, under various other topics, warn of immediate and sudden death to the phone if you attempt to install a baseband prior to 4.3 MJB.
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
nosphor said:
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
Click to expand...
Click to collapse
I'm in the USA. The security features on the I747 US version are far different. I don't know how everyone else is succeeding. I am completely lost.
You are in the wrong forum, anything you try from here will hard brick your phone.
Sent from my GT-I9300 using Tapatalk
Sorry to tell you that, but what you say is not completely true.
Yes, there is a lot of people that rush to give an answer to the question, but there is also people that really like to help people that are in trouble :good:
Please, don't take most of the case for a generality
http://forum.xda-developers.com/showthread.php?t=1756338
Sent from my GT-I9300 using Tapatalk
Yes, i've read this, i know that, that's why i talk about the difference between country, different phone model
My apologies. Thought this was the 747 board. Go ahead and lock this, I'll repost in the correct forum.
Tried TWRP?
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.
startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Messed_sensation said:
Hello everyone,
I am a complete noob and hopefully you guys can help me out. I have tried to wrap my head around all the new android terms and my head is spinning. Anyways, I was given a HTC Sensation 4G Z710a on the Bell network. I registered on the htcdev to unlock the bootloader and following the steps, I fail to get the token. I have tried on two PC's and my friend tried on his MAC. My friend thinks the reason it fails is because the phones software is not up to date. Is it possible that it cannot get the token because the software is out of date? We tried to update the software and it fails. The problem looks like it is due to the installation of a clockworkmod. I have tried using the factory reset and the the cwm to do a factory reset and nothing has changed. Other than this, it looks like the phone has S-OFF and is not rooted.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
es0tericcha0s said:
Kind of hard for us to tell you if the issue is the software update, when you haven't told us which update it's on. However, since the phone has already been modded, and is S-Off, that means the bootloader is already unlocked so using the HTCdev website is not needed. You can just update via a custom rom since you already have CWM.
Click to expand...
Click to collapse
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Messed_sensation said:
Thank you for your reply with the good news. This is probably irrelevant now that you said i can update via a custom rom. Under software information: Android Version; 2.3.3, HTC Sense Version; 3.0, Software Number 1.35.666.1.
It looks like now I need to research how to update via a custom rom and which rom to get. (Update. I looked into flashing a ruu and my cid is SuperCID 11111111. As long as I find a ruu that is Pyramid TMOUS, it should be good?) I am exited to be getting rid of my junky iphone. Do you have any suggestions as to what rom to get??
Click to expand...
Click to collapse
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Thank you for all your help and suggestion:good:. I am now running the Android Revolution HD.
This is a huge change from my iphone 4.
es0tericcha0s said:
I would upgrade the phone to ICS via the RUU. I suggest this for 2 reasons - 1) so you can have the newest update and firmware as just flashing an ICS rom by itself will not be a good idea as you will have issues with the touch sensors and radios (touch screen won't respond and signal issues) and 2) so you can have experience on how to put the phone back to stock in case there's an issue during flashing a rom, or you need to resell it. Once you have the RUU and know it works, then flashing roms will be much less scary as there aren't many things you can do that would not be fixable by it. You can get away with just flashing the rom and the firmware as well, but I speak with many years of experience and 100s of phones under my belt, and I know that whenever I play with a new phone, I learn how to fix it first before I learn how to mod it.
As far as suggestions, I would start with something simple and solid like Android Revolution HD. See what you like and dislike and go from there.
Click to expand...
Click to collapse
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Messed_sensation said:
Here is another update, and I am not sure if you can help. I thought everything was fine with the install, but it seems like my mobile network is not working. I followed all the steps from http://forum.xda-developers.com/showthread.php?t=1098849 except I used Clockwork Mod instead of 4EXT Touch Recovery. I looked through all the related settings and even tried changing them, rebooting and seeing if it made any changes. I also even followed the steps a second time and got the same result.
Click to expand...
Click to collapse
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
es0tericcha0s said:
Is it just data or are you unable to make calls and texts as well? If it's just data, then most likely it is an issue with the Bell APN needing set correctly. If you don't get a signal or any connection to the cell towers, then you might not have the right firmware or radio. Did you update to the last update HTC put out for it?
Click to expand...
Click to collapse
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Messed_sensation said:
:good:You are good! It was just my data that was not working, and you were right on the money. After reading your reply, I checked my APN settings and adjusted them accordingly to what my carrier states. It is working perfectly now. Thank you so very much for your help. Take care.
Click to expand...
Click to collapse
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
es0tericcha0s said:
I do this kinda stuff for a living. Glad all is well. Enjoy your "new" phone. :victory:
Click to expand...
Click to collapse
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Messed_sensation said:
I have been getting around 12 hours out of my battery with not too much use on the phone. I am running the SebastionFM Kernel. I read that I will get better battery life on the Bricked Kernel. Can you tell me if that is the way to go? I am trying to dl the kernel to flash it, but I am not sure which file to download. http://forum.xda-developers.com/showthread.php?t=1256668. Also, when I flash the Kernel, Is it pretty straight forward or are there settings that I would need to choose.
Thanks again.
Click to expand...
Click to collapse
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
es0tericcha0s said:
Depends on which rom you are using... The developer of the kernel mentioned near the end of the thread that his kernels are a little outdated for the newer Sense roms that are out there, so you might need to proceed with caution. Whenever you are flashing kernels, you should both make sure you have things backed up somewhere safe (Google, your PC, etc) as well as make a nandroid backup in recovery before flashing. It's typically recommended to wipe the cache and dalvik cache before installing new kernels (since you are S-Off, S-On users need a slightly different path to upgrade...). You might look into why your battery life is not as good as it could be in it's current configuration first before changing major components such as the kernel. Look into Greenify to hibernate apps while the screen is off and something like GSam Battery Monitor or Better Battery Stats or Wakelock Detector to break down the battery stats and wakelocks as those typically cause the biggest loss of battery life.
Click to expand...
Click to collapse
I think it is my battery. I picked up an Anker and the phone is now at 20% after 21hrs. Is there a way to get Emoji to work on my phone? When people SMS me, on the lock screen they show up as a question mark in a box but when i go to read the text message there is nothing there.
Using a different keyboard will let you send Emojis, but not really sure about enabling the view from other people's messages off the top of my head, sorry. I recommend SwiftKey for a great keyboard replacement with lots of built in Emojis.
Edit: They do keep coming!
I looked into doing it, and there is no way in hell that I should be a) doing it, and b) unleashing it onto the world. It would be bad.
I only have the one phone to test it on and can't risk messing it up and I don't have the experience to work on it if it didn't come out perfectly.
I expect that it will be the last Sprint ROM released for this phone, We're nearing the end of support, so it would be good to have these final versions "fixed" and available
...on the off chance a few developers will jump right in and cook up a few mega ROMs for us.
DQG1 Root and Xposed (rewritten)
On a related note, I installed stock DQA1 DQG1, using the usual CF Autoroot, battery pull thingy process Odin for the ROM and TWRP, then booting once, booting into recovery, and then installing SuperSU and it rooted fine. No loss of settings or anything else as far as I can tell.
I did have to install the latest versions of the Xposed files. After rooting and custom recovery (TWRP works fine), install XposedInstaller_3.1.4.apk first like any other apk, then go to recovery and install Wanam v87.1-alt-sdk23-arm-custom-build, but everything (Xprivacy, etc.) worked fine. Keep in mind, you HAVE to use the "alt" (see the "alt" in the file name above?) version or else it won't work. Samsung made some changes, blah, blah, blah. Much thanks to Wanam!
New side note: I did do a factory wipe, and even after reinstalling everything, and using a ROM that contains bloatware, I still have like 40% more space on the phone. I truly don't know what happened there.
Anyone have any thoughts as to kernel? I downloaded Emotion r26 RC1, and BeastModeKernel 1.0BETA, but I haven't tried them yet.
EDIT: Emotion r26 RC1 works fine, but it doesn't seem like CPU freqs are ever going to stick.
No surprise that neither Emotion nor BeastModeKernel worked; I haven't seen anything else that may.
Thoughts anyone?
Both kernels are good, emotion has a few more options to tweak but I took an update a month or two ago and run NotEdge ROM fine , I just use SO launcher with it because I like TW, also latest xposed is 86.1 and I wish I could do what your asking but it probably would be just as bad you'll be fine with that ROM I just suggested it has everything u just requested just make a nandroid and do it at home in case you do something wrong you can always ODIN back your firmware
Sent from my HTC One M9 using XDA-Developers mobile app
D'oh!!
Eating a little crow here. So far, there have been two three 742 updates, maybe there will be more. Who knows?
But I edited the title of the first post. Again. Again. 741 times.
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Over a year later, and the still keep coming.
Hmmmm.
I did take another gander around, but it seems that I would need Linux to do it correctly, so I am still opting out of doing it myself.
mictek said:
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Click to expand...
Click to collapse
They all arrive here: https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915P/ eventually.
Hello i got a note 4 Sprint MM 6.0.1 N910PVPU5DQI5 . i am from Argentina, and i bought the phone used from a guy from USA. (i don`t know how but it`s working with the bands here but i dont know if 4g is working, the guy says it works, maybe i don`t have 4g singal in my zone) .
the phone works fine, but has some srpint stuff and ads that bother me. so i flashed TWRP , and now i am looking for any roms and kernels to flash.
for example, is safe to flash this: https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
or should i change something first ???.