SimpleKernelBy Twitish
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do you enjoy using the Stock CyanogenMod Kernel because it is extremely stable? Have you ever kept using the CyanogenMod kernel but wished you had some Governors and I/O Schedulers for better battery life and speed? Then look no further! Introducing the SimpleKernel! This is nothing more than the CyanogenMod kernel (Thanks to dhacker and Hashcode) with added governors and I/O Schedulers added to enhance the kernel slightly, and it has been compiled with the Linaro Compiler. Other than that, this kernel has no other pieces of code added to keep it simple.
This is only for CM10.1 or a ROM running 4.2.2.
Features
I/O Schedulers
sioplus
fifo
row
Governors
lulzactive
smartassV2
adaptiveX
adaptive
pegasusq
sakuractive
interactiveX
Instructions
Download the SimpleKernel zip file
Flash the zip file normally (places the files in /system/etc)
Wipe Cache and Dalvik Cache
Enjoy the Simple Kernel!
Install Trickster Mod App from Play Store to configure the Kernel
To-Do List
Add Overclock Support (SORRY!)
Create an Android 4.3 version
Downloads
Version 1 - SimpleKernel-4.2.2
Source
CREDITS
Kernel Source by STS-Dev-Team
Linaro Toolchain from DooMLoRd
Working great for me so far. Thanks for this! Its nice to have the extra options for governors etc. without the instability of jbx kernel
Sent from my XT912 using Tapatalk 4
Is it possible to add "2way call recording patch" to this kernel ??
veimus said:
Is it possible to add "2way call recording patch" to this kernel ??
Click to expand...
Click to collapse
I will add this to the To-do list. Probably look into this after I fix bfq I/O scheduler, and add OC.
Sent from my XT912 using xda app-developers app
Amazing, good job and bright my razr new life again, i even no think about to moto x and moto news phone.
Thanks twitish again!!
Sent from my XT910 using Tapatalk 2
It would be nice if u mentioned which schedulers and governors help in improving what. Anyway nice initiative dev !
Sent from my XT910 using Tapatalk 2
Gautam Padirooted said:
It would be nice if u mentioned which schedulers and governors help in improving what. Anyway nice initiative dev !
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
There is a thread in XDA forums that explains EVERYTHING on this topic, so repeating is futile.
This is nice - we have now two kernels, nice work!
megawebmaster said:
There is a thread in XDA forums that explains EVERYTHING on this topic, so repeating is futile.
Click to expand...
Click to collapse
The last time i saw that post it did not have many of the newer governors.
Anyway here is a link to the same thread which has now been updated with a lot more details.
http://forum.xda-developers.com/showthread.php?t=1369817
twitish said:
I will add this to the To-do list. Probably look into this after I fix bfq I/O scheduler, and add OC.
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
can you try a kernel build for droid 4 ?
there is a problem with the sound in cm10.1 and cm10.2 and until 10.1.2 it worked fine with cfq or deadline but now cm10.2 and 10.1.3rc2 are not working anymore no mater what scheduler I choose.
I flashed this on droid 4 cm10.1.3rc2 is booting and everything seems to work except the hardware keys (option, home, back, search). I would like to see if it's working stable with row scheduler.
I tried to build my own cm but the zip file will not boot and I followed several howtos and all the files are in the zip file.
Regards
lucize said:
can you try a kernel build for droid 4 ?
there is a problem with the sound in cm10.1 and cm10.2 and until 10.1.2 it worked fine with cfq or deadline but now cm10.2 and 10.1.3rc2 are not working anymore no mater what scheduler I choose.
I flashed this on droid 4 cm10.1.3rc2 is booting and everything seems to work except the hardware keys (option, home, back, search). I would like to see if it's working stable with row scheduler.
I tried to build my own cm but the zip file will not boot and I followed several howtos and all the files are in the zip file.
Regards
Click to expand...
Click to collapse
This sounds like something is wrong upstream which I simply pull my source from. And without a Droid 4 or any sort of log I can't fix this. Sorry.
As for the hardware keys, do they not work completely or do they just not light up?
Sent from my XT912 using xda app-developers app
Its great to see more options for our razr! I look foreword to seeing what you will bring to the table. Congrats on release.
Sent via Raven
"Dark Wings.....Dark Words"
twitish said:
This sounds like something is wrong upstream which I simply pull my source from. And without a Droid 4 or any sort of log I can't fix this. Sorry.
As for the hardware keys, do they not work completely or do they just not light up?
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
yes, the sound is upstream, but I think that is a bug in the motorola proprietary drivers, but it worked ok with cfq and deadline (found it by chance because noop was previously the default one).
the keys light up on screen touch or on hardware keys touch(not those on screen).
Previously I tried with an older version of jbx kernel but it will lag after some time and I am curious if your kernel will not lag but without home key I can't use the phone .
O maybe you can tell me by PM how you compiled the kernel so I could try with droid 4.
Thanks !
Working great. Thank you
Sent from my XT912 using Tapatalk 4
WiFi doesn't work with this kernel.
Sent from my XT912 using Tapatalk 4
iaminflames said:
WiFi doesn't work with this kernel.
Sent from my XT912 using Tapatalk 4
Click to expand...
Click to collapse
Having same WiFi issue...WiFi won't turn on
Sent from my XT912 using Tapatalk 4
chiahead52 said:
Having same WiFi issue...WiFi won't turn on
Sent from my XT912 using Tapatalk 4
Click to expand...
Click to collapse
My WiFi is working fine have you guys tried running the wifical.sh script them turning airplane mode on and off. Although I did have trouble with slim/jbx and WiFi not working after a dirty flash but a fresh install took care of it I think somehow some data might have gotten corrupted
Sent via Raven
"Dark Wings.....Dark Words"
Tested with last Carbon and LiquidSmooth 4.2.2. versions and no one boots... Using BMM on Slot3.
Brantuck84 said:
My WiFi is working fine have you guys tried running the wifical.sh script them turning airplane mode on and off. Although I did have trouble with slim/jbx and WiFi not working after a dirty flash but a fresh install took care of it I think somehow some data might have gotten corrupted
Sent via Raven
"Dark Wings.....Dark Words"
Click to expand...
Click to collapse
I tried manually running the wifical.sh script and it comes back with an error and says could not calibrate. Tried reflashing cm10.1 and WiFi worked, then flashed simple kernel again and WiFi is broken again.
Sent from my XT912 using Tapatalk 4
No Wi-Fi here also. LS2.9
I have tested again this kernel over last official Carbon 4.2.2. ROM using Safestrap in Slot1 and I got same problem... It doesn't boot, I got a black screen...
Any help would be appreciated. I'd like to test extra governors and ios...
Thanks!!!
Related
Built straight from HTC source 3.0.16 with 3.0.101 upstreamed
Added Chad0989's fastcharge v2
Added Showp1984's kernel based mpdecision with sysfs interface, here is a guide on explaing the settings
Added DanceDance Lazy Lagfree Intellidemand & Wheatley Governors
Added SIO Scheduler & V(R) Scheduler
Added CIFS Module use CIFS Manager or follow this guide to get shares to mount
Must Read: To install any of my kernels confirm you are getting boot with your current kernel. No need to wipe anything, the installers do it for you. If needed, only wipe cache/dalvik after flash. If your device finds an issue/random reboot/freeze, please post the issue and what you were doing at the time. Also to flash the current version if coming from a stock boot.img you must flash an early version prior <v1.4
Version denominations are as follows:
a full version is 3.0
an upstream version becomes 3.0.1 and increases upon each upstream
Current version is: 4.2
Downloads! (current versions)
Older versions:
Android Filehost Box (versions 1.5 - 3.1)
Rom & Kernel Download Page!!!(Older versions 1.5>)
Officially Unofficial Mascot Bootanimation! Aosp only
-Flash in recovery
(Thank you Synisterwolf)
Use my kernel scripts package if you wish to change it's defaults or to uninstall them prior to flashing a different kernel:
Kernel Scripts download
These will work on all branches.
Credits & Thank you!!!
Intervigilium (for the 3.0.42 upstream)
Wildstang83 (for answering the few questions I had & always being there to help)
Chad0989 (for bringing us AOSP, without him I would never had brought the AOSP port online)
MaulingDeOso (for being him and helping with a few things)
DSB9938 (for his kernel knowledge & allowing me to pull some commits -reading and watching his github account to learn a couple things)
SebastianFM (for his kernel knowledge as well -really awesome dev I might add)
v4npro (for being a sponsor and donating the server)
vinylfreak (for the awesome hboot & video fix found in my sense 4 & global ports)
con247 (for the scripts utilized in the alternate installers)
drellisdee (for the awesome misctool to fix mainver issues)
Faux123 Showp1984 & MikeC84
Thank you Iamtheonetheycallneo, Izzaeroth, tjarvis, & apophis9283 for providiing motivation!!!!
My github repo
Donations accepted but not expected!
Mirrors of these files are available upon request.
Funky Kernel Changelog:
Sense Kernel downloads
Copy.com Mirror
Full changelog
v4.2
Reverted back to 3.8 series clockrate source
Added CWM S-On Compatibility
v4.1
Version number jump: double checked/re-enabled GPU Overclock
Upstreamed to 3.0.101
v4.0
Revert "Faster scaling through lower end clocks"
v3.9
Added Force fast charge v2 by chad0989
Upstreamed to 3.0.95
Updated min clock rates
Screen off should now sleep the gpu even better
Upstream changelog's can be found here: www.kernel.org
Old changelog & Links
Use my kernel scripts package if you wish to change it's defaults or to uninstall them prior to flashing a different kernel:
Kernel Scripts download
These will work on all branches.
i love the whole community here
Sent from my ADR6425LVW using Tapatalk 2
live2die said:
i love the whole community here
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the kind words live2die. I already have JB AOSP Port of the kernel ready, but no roms to use it on yet. =/ Will be working on Sense 4 as well soon dependent on feedback.
Thanks for your work......using this (AOSP from your Android File host) since yesterday.....working great. Thanks again....
Sweet, more kernel action. I do have one hope for a kernel, which is CIFS support. I have been unable to get CIFS working on any of the ROM/kernel combo I have tried. I have tried quite a few.
Any thoughts on this, anyone? Usually my CIFS inquiries go unanswered, lol.
Sent from my HTC Rezound using Tapatalk 2
xdadevnube said:
Sweet, more kernel action. I do have one hope for a kernel, which is CIFS support. I have been unable to get CIFS working on any of the ROM/kernel combo I have tried. I have tried quite a few.
Any thoughts on this, anyone? Usually my CIFS inquiries go unanswered, lol.
Sent from my HTC Rezound using Tapatalk 2
Click to expand...
Click to collapse
That isn't usually requested often. Will look into it.
Cross posted from the CM9 thread:
Here's another night's battery stats, Snuzzo:
View attachment 1363239
View attachment 1363241
d.kozzer said:
Cross posted from the CM9 thread:
Here's another night's battery stats, Snuzzo:
View attachment 1363239
View attachment 1363241
Click to expand...
Click to collapse
Thank you. Not as bad but still horrid. Currently working with a few others to completely correct this.
Snuzzo said:
Thank you. Not as bad but still horrid. Currently working with a few others to completely correct this.
Click to expand...
Click to collapse
Gonna try murhaava1'a build today/tonight and see how that goes. Is he working with you?
d.kozzer said:
Gonna try murhaava1'a build today/tonight and see how that goes. Is he working with you?
Click to expand...
Click to collapse
Looking at what he did to correct the issue at hand.
Snuzzo said:
Thank you for the kind words live2die. I already have JB AOSP Port of the kernel ready, but no roms to use it on yet. =/ Will be working on Sense 4 as well soon dependent on feedback.
Click to expand...
Click to collapse
siulmagic put a cm 10 port out
http://forum.xda-developers.com/showthread.php?p=32007179
Sent from my Rezound using Tapatalk 2
live2die said:
siulmagic put a cm 10 port out
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Well aware. Working on it but can't quite get it working. Didn't give up just set aside on the backburner for now as the knowledge is beyond my intellect.
Snuzzo said:
Well aware. Working on it but can't quite get it working. Didn't give up just set aside on the backburner for now as the knowledge is beyond my intellect.
Click to expand...
Click to collapse
far beyond mine
Sent from my Rezound using Tapatalk 2
Thanks for the work, I just installed AOSP finally and Neo includes your kernel in his Rage rom. I was wondering if you were considering adding badass governor in the future. My last kernel, dsb9938's rezound cubed, had it and it seemed to give slightly better battery life than wheatley.
shadowmonk36 said:
Thanks for the work, I just installed AOSP finally and Neo includes your kernel in his Rage rom. I was wondering if you were considering adding badass governor in the future. My last kernel, dsb9938's rezound cubed, had it and it seemed to give slightly better battery life than wheatley.
Click to expand...
Click to collapse
I just optimized Wheatley for a slower cpu ramp but have yet to pull/cook in the changes. On another note, v1.1 is now online with CIFS. For those who don't know what CIFS is, it allows Samba shares to be mounted acrossed an internal network to allow streaming and file sharing.
I have yet to build v1.1 for AOSP since working on the wifi wakelock issue currently (might as well kill 2 birds right?)
Although with your recommendation, I will look into it. Again Tuesdays are the usual build days.
live2die said:
far beyond mine
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Don't say that. I have seen your posting. You're pretty damn smart.
For those who have downloaded Global v1.1. It will softbrick. I need to redo the boot.img. You will end up in a bootloop
It's good to see another kernels show up on the scene. I'm gonna wait a little bit for it to mature, but I'll definitely be trying it out sometime soon.
What is up with that site? I made an account then clicked your link again (specifically the AOSP one). I saw a delete button and thought "no way I could delete someone else's file" so I clicked it and it deleted it (the RC zip)... did I just delete your files or is it only gone for me?
Crap. Its OK. I got RC1 locally but won't be able to reupload til later. I'll think of a different way to give you guys access to previous versions without being able to delete. Please be careful next time. I'll fix it later.
Sent from my ADR6425LVW using xda app-developers app
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
*/
I'm sorry, did you expect a fancy thread? For now, simplicity will do. Here I present my personal kernel builld for the GN2. Features will be added as time passes but for, live with it. Its based on the latest Official Kernel Sources from Samsung. For 4.1.x Samsung based ROMs.
Download:
Code:
{NEW}
[URL="http://d-h.st/Kj8"]Build 4 (N7100)[/URL]
[URL="http://d-h.st/q77"]Build 4 (N7105)[/URL]
Instructions:
Code:
* Download zip
* Flash with a recovery
Credits:
Code:
AndreiLux for commits
Andip71 for Boeflla
paul678 for initial on build 4
F.A.Q:
Code:
1. Is this working on device 1, 2 or 3?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> Flash back to something else. And report problem in thread.
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life.
4. App FC's or something crashes?
> Try reinstalling app again or clearing its data. Give me a logcat the if problem persists.
5. Does this kernel has A, B or C?
> Do some research. Check thread.
6. Could you please add A, B or C?
> Don't PM me on this, just post in thread and I will look into it.
Changelog:
5 April 2013 [Build4]
N8000 base source
Boeffla Sound fix (Andip71)
OC support up to 1800MHz.
STweaks support
Charging control (input)
Sensorhub updated
Updated Mali drivers
Enabled Zram
Added SIO scheduler
Fsync disabled when screen on (AndreiLux)
24 March 2012 [Build3]
Boeffla sound (Andip71)
ExFAT support
Improved battery / Standby time
Exnyos bug patches
GPU Overclock/Undervolt support (untested)
SLQB Memory Allocator
Reduced debugging WiFi
Google Snappy updated; missing fix
Compiled with Linaro toolchain
Enabled ARM CPU Technology
15 March 2012 [Build2]
Cma region
CRT-off
Fixed exnyos mem
Cleaned up some code
Deelsleep (should work now)
11 March 2013 [Build1]
Initial release
Google snappy drivers
Cleancache
Based on Update 2
Re: [Kernel] emwno's.kernel - 11/03/13
Downloading... but only cause i am curious.
Why should i install this?
Regards,
Axelman
Sent from my N-7100 using XDA-Developers app
Who knows . This doesn't contain unique* features as such, so its your pick.
Re: [Kernel] emwno's.kernel - 11/03/13
Thnx for the reply.
Why build a kernel, that hasn't some unique features? Whats different about this one?
Regards,
Axelman
Sent from my N-7100 using XDA-Developers app
Axelman8 said:
Thnx for the reply.
Why build a kernel, that hasn't some unique features? Whats different about this one?
Regards,
Axelman
Sent from my N-7100 using XDA-Developers app
Click to expand...
Click to collapse
What's unique about this?
The developer.
no unique features yet*. This was just a test version.
good work emwno I wish you success. please port linux 3.4 . If you do that would be great.
exynos and sds fix included??
Re: [Kernel] emwno's.kernel - 11/03/13
Hi,
Installed the kernel...
Any particular feature* you want to have tested?
Sofar its smooth and i came from Perseus... i see a little clearer graphics, but on perseus i screwed around with colors settings, so could be me
Regards,
Axelman
Sent from my N-7100 using XDA-Developers ap
EDIT1: Got no wakeup lagg anymore. Used to be 2 sec. Now instantly.
EDIT2: Doesnt work with Triangle Away like other kernels.
EDIT3: I am running stock DMA6 .odex
But sofar, i Like it
Axelman8 said:
EDIT: Got no wakeup lagg anymore. Used to be 2 sec. Now instantly.
Like it
Click to expand...
Click to collapse
You like getting no deep sleep?
Re: [Kernel] emwno's.kernel - 11/03/13
Axelman8 said:
Hi,
Installed the kernel...
Any particular feature* you want to have tested?
Sofar its smooth and i came from Perseus... i see a little clearer graphics, but on perseus i screwed around with colors settings, so could be me
Regards,
Axelman
Sent from my N-7100 using XDA-Developers ap
EDIT: Got no wakeup lagg anymore. Used to be 2 sec. Now instantly.
Like it
Click to expand...
Click to collapse
Thanks for the feedback, I hate wake up lag, gonna try this now. Thanks.
Sent from my GT-N7100 using xda premium
Re: [Kernel] emwno's.kernel - 11/03/13
emwno said:
no unique features yet*. This was just a test version.
Click to expand...
Click to collapse
Sir, i was in your latest PA build,flashed it, does'nt boot, black screen for more than 10 minutes. Tried 3times,same result.
Sent from my GT-P1000 using xda premium
1. did you wipe everything? (system/data/cache/dalvik) to be on the safe side?
2. try a different kernel, i rememebr it booting for me.
3. associate topic in its thread.
thankyou
Re: [Kernel] emwno's.kernel - 11/03/13
emwno said:
1. did you wipe everything? (system/data/cache/dalvik) to be on the safe side?
2. try a different kernel, i rememebr it booting for me.
3. associate topic in its thread.
thankyou
Click to expand...
Click to collapse
is this kernel for aosp roms?, I flashed it on jellybam v6.6 no boot, just a black screen, any suggestions, thanks.
Sent from my GT-N7100 using xda premium
vtec303 said:
is this kernel for aosp roms?, I flashed it on jellybam v6.6 no boot, just a black screen, any suggestions, thanks.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
it doesnot. try someother like neak etc.
Re: [Kernel] emwno's.kernel - 11/03/13
emwno said:
1. did you wipe everything? (system/data/cache/dalvik) to be on the safe side?
2. try a different kernel, i rememebr it booting for me.
3. associate topic in its thread.
thankyou
Click to expand...
Click to collapse
Nothing worked for me,using your latest awesome PA build. Bad luck!
Thanks.
Sent from my GT-P1000 using xda premium
Re: [kernel] emwno's.kernel - 11/03/13
consider of doing for N7105 as well?
Sent from my GT-N7105 using Tapatalk 2
Re: [kernel] emwno's.kernel - 11/03/13
Can I use this kernel on stock 4.1.1?
Sent from my GT-N7100 using xda app-developers app
R: [kernel] emwno's.kernel - 11/03/13
Axelman8 said:
Hi,
Installed the kernel...
Any particular feature* you want to have tested?
Sofar its smooth and i came from Perseus... i see a little clearer graphics, but on perseus i screwed around with colors settings, so could be me
Regards,
Axelman
Sent from my N-7100 using XDA-Developers ap
EDIT1: Got no wakeup lagg anymore. Used to be 2 sec. Now instantly.
EDIT2: Doesnt work with Triangle Away like other kernels.
EDIT3: I am running stock DMA6 .odex
But sofar, i Like it
Click to expand...
Click to collapse
No wake-up lag could mean no deep sleep... have you checked?
Inviato dal mio GT-N7100 con Tapatalk 2
Aperture Laboratories presents
GLaDOS V1.4
The latest innovation in human-smartphone interaction. Our scientist have shown in extensive tests that humans operating our kernel on their devices experience 67% more joy in life while simultaneously the likelihood of being maimed or killed by falling space debris is significantly reduced. Also preliminary human trials indicate that it might offer some protection against lethal dosages of gamma radiation and blows to the head with a rod-like object.
Features:
Based on stock Android kernel Jelly Bean 4.2.2 JDQ39
Simple I/O (SIO) and Read-over-Write (RoW) block schedulers
JRCU
FSync Control version 1
Generic CPU hotplug driver version 1
UV interface (Francisco Franco)
GPU OC interface (Francisco Franco)
CIFS
NFS client
NTFS read/write support
Cleaned out all unnecessary kernel features and drivers
Various other tweaks
I do not support the Cyanogen Mod (CM) ROM and if you run into any problems using it with this kernel you are on your own.
Download (only for 4.2.2 JB ROMs):
http://goo.im/devs/Ezekeel/GLaDOS-Nexus7 (thanks to goo-inside.me for hosting)
http://d-h.st/users/Ezekeel/?fld_id=5237#files (thanks to Dev-Host for hosting)
GLaDOS Control app:
Market: https://market.andro...l.gladoscontrol
Android Pit (accepts Paypal): http://www.androidpi.../GLaDOS-Control
If you had a different custom kernel installed before, you might need to reflash the original kernel that came with your ROM (boot.img in zip).
During installation the cache partition, Dalvik-cache and modules and init.d scripts from previously installed kernels are cleaned.
Source code:
https://github.com/Ezekeel/GLaDOS-nexus-7
This kernel is optimized to run best at the default options. There no need to change options like for example CPUfreq governor or min/max frequency - changing anything can have a negative effect on stability and performance.
Do not use profiles or hotplugging, they are unnecessary and only lead to instabilities.
If you experience any problems and are on a nightly or kanged ROM, try the latest stable version of that ROM first. I will not give support or answer any questions if you do not try this before reporting a problem with the kernel.
If you experience stability problems like reboots, freezes, FCs and SoDs and you did OC, first try changing back to the stock settings. If this solves the problems, your OC configuration is not stable. There are some indications that OC settings which run fine at high battery charges might still cause problems at lower battery charges. So to be safe always check that your OC configuration runs fine at low battery like 5%.
When reporting a bug always include information about your ROM and hardware model. Also be as precise as possible when describing the problem. Just because a single person is experiencing a problem, it does not mean there actually is a problem with the kernel. I always wait until at least one other person can confirm the issue before I look into it. So if you see someone posting a bug report, do not be shy and feel free to confirm the issue or if you do not have the problem let me know that too.
When asking for a feature you would like to see implemented in GLaDOS always provide a link with information about this tweak and preferably also a link to the source code.
Aperture bootanimation courtesy of Rascarlo ([twitter]rascarlo[/twitter]).
Changelog
GLaDOS-V1.4
Changed the memory allocator back to SLAB and removed SLQB.
Added a generic CPU hotplug driver and removed Nvidia's autohotplug implementation.
GLaDOS-V1.3
Fixed bug in baseband driver.
GLaDOS-V1.2
Added RoW (Read-over-Write) I/O scheduler.
Fixed kernel crash when unplugging USB OTG devices.
GLaDOS-V1.1
Added custom voltage interface (Francisco Franco).
Added GPU overclocking interface (Francisco Franco).
GLaDOS-V1.0
ONLY FOR JELLY BEAN 4.2.2 ROMS!
Initial release.
GLaDOS-V1.0RC2
Beta release.
AW: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
Nice, will test.
-
Everything should be made as simple as possible, but not simpler. Albert Einstein
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
Okay sorry with this kernel my nexus doesn't Boot...
Nexus 7 wifi only.
-
Everything should be made as simple as possible, but not simpler. Albert Einstein
androidlover007 said:
Nice, will test.
-
Everything should be made as simple as possible, but not simpler. Albert Einstein
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
Okay sorry with this kernel my nexus doesn't Boot...
Nexus 7 wifi only.
-
Everything should be made as simple as possible, but not simpler. Albert Einstein
Click to expand...
Click to collapse
the kernel boots fine. if you came from a kernel with a modified ramdisk you'll need to reflash the ram (as stated in OP)
thanks for the kernel @Eze
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
Finally! Will flash when I'm home
Sent from my Nexus 4 using xda premium
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
It seems like i get these weird lock screen thing. I'm not sure how to describe it. I'm on vanir ROM. Whenever you lock screen then turn it on again this thing happens where the screen is flashing? I'm not sure what it is. I'll try to get a video of it. It's the kernel as i have no problem on Franco or lean.
Sent from my Nexus 7 using xda premium
jarjar124 said:
It seems like i get these weird lock screen thing. I'm not sure how to describe it. I'm on vanir ROM. Whenever you lock screen then turn it on again this thing happens where the screen is flashing? I'm not sure what it is. I'll try to get a video of it. It's the kernel as i have no problem on Franco or lean.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
This has been discussed on the ROMs thread. You need to comment out the GPU clock set line in vanir.conf on the SD storage.
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
elfrosto said:
This has been discussed on the ROMs thread. You need to comment out the GPU clock set line in vanir.conf on the SD storage.
Click to expand...
Click to collapse
Thanks. I haven't followed that thread for awhile.
Sent from my Nexus 7 using xda premium
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
Does this change the boot image/logo?
Sent from my Nexus 4 using Tapatalk 2
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
LOVE ME PLEASE said:
Does this change the boot image/logo?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yes
Re: [KERNEL][18 MAR] GLaDOS V1.1 for JB 4.2.2
Good to see you back after your accident Ezekeel
Sent from my Nexus 7 using Tapatalk HD
I have released GLaDOS V1.2 adding the RoW (Read-over-Write) I/O scheduler and fixing the kernel crash when unmounting USB OTG devices.
Flashed the new kernel and its super smooth. But all 4 cores are on constantly. Even when is idle. Is it supposed to act like that?
Ezekeel said:
I have released GLaDOS V1.2 adding the RoW (Read-over-Write) I/O scheduler and fixing the kernel crash when unmounting USB OTG devices.
Click to expand...
Click to collapse
Thanks a lot, i'll test it right now and report back if it's needed.
It's damn good to see you around Ezekeel
I'll try to flash it again to test soon. My first attempt resulted in a boot loop for some reason. I am on the most current bootloaders too.
Re: [KERNEL][27 MAR] GLaDOS V1.2 for JB 4.2.2
peneoark said:
I'll try to flash it again to test soon. My first attempt resulted in a boot loop for some reason. I am on the most current bootloaders too.
Click to expand...
Click to collapse
Same
If i use awesome's kernel cleaning script,wouldnt it do the same as flashing stock kernel???
Sent from my Nexus 7 using XDA Premium HD app
Also a pain in the ass changing boot ani. every time i flash this kernel.
mkhtfld76 said:
Same
If i use awesome's kernel cleaning script,wouldnt it do the same as flashing stock kernel???
Sent from my Nexus 7 using XDA Premium HD app
Also a pain in the ass changing boot ani. every time i flash this kernel.
Click to expand...
Click to collapse
Only one way to find out
Re: [KERNEL][27 MAR] GLaDOS V1.2 for JB 4.2.2
mkhtfld76 said:
Same
If i use awesome's kernel cleaning script,wouldnt it do the same as flashing stock kernel???
Sent from my Nexus 7 using XDA Premium HD app
Also a pain in the ass changing boot ani. every time i flash this kernel.
Click to expand...
Click to collapse
Drop the boot ani you want in data/local and you won't have to change it
Re: [KERNEL][27 MAR] GLaDOS V1.2 for JB 4.2.2
peneoark said:
Only one way to find out
Click to expand...
Click to collapse
Yeah the script worked. As long as you dont have any init.d tweaks you want/need. Guess i need to edit the script just in case
Sent from my Nexus 7 using XDA Premium HD app
Re: [KERNEL][27 MAR] GLaDOS V1.2 for JB 4.2.2
Or you could use faux123's reset kernel then flash the kernel
Sent from my Nexus 7 using xda app-developers app
Fude Kernel v1.4.1 (3.0.101)
Features:
Compatible with stock 4.1.2 or any rom based in stock jellybean.
Updated to 3.0.101
Native exFat support (Driver from Samsung OSRC).
Support for BLN (Backlight Notifications - Ready to use BLN Control).
Compiled with Linaro Toolchain 4.9 optimized for Cortex-A9!
Sysctl tweaks.
Multi-core scheduler support.
SWAP support.
zRAM support.
Disabled Samsung DFVS.
Init.d support (needs busybox)
Added IO schedulers:
ROW
SIO
SIOPLUS (I/O Scheduler by default)
VR
ZEN
Added governors:
Abyssplug (as default cpu governor)
HotPlugX
LulzactiveQ
Sakuractive
Smartassv2
Changelog:
Code:
[/SIZE]
1.4.1 [2014/08/27]:
* Fixed bluetooth.
* Added zRam support.
1.4 [2014/08/11]:
* Rebuilded from clean sources (yes, again, rebuilded from the new samsung kernel sources)
* Applied all patches from 3.0.31 to 3.0.101
* Now, I added only the best governors and io schedulers
* Updated exFat implementation
* Disabled Samsung DFVS
* Update toolchains
* Add init.d support
1.3:
* Rebuilded from clean sources.
* Removed LagFree and Hotplug governors.
* Added InteractiveX, OndemandX, Lionheart and Sakuractive governors.
* Multi-Core scheduler support.
* New exfat implementation.
* Sysctl tweaks.
* Fix 1ghz bug (I hope)
1.2:
* Added Lazy, LagFree and OndemandQ governors.
* Added ROW and ZEN I/O schedulers.
1.1:
* Fixed About -> Phone -> Kernel version
* Added MinMax and LulzactiveQ governors
* Ondemand + SIO are default governor and IO scheduler
* Added support for swap
1:
* Initial release
Downloads for 8190/8190L
1.4.1
In attached files
Previous versions:
1.4 http://www.mediafire.com/download/uatub78971gnyl5/Fude-Kernel-1.4_GT-8190.zip - MD5:
Code:
55d74c290a56ff79ddac988057d7024b
1.3 http://www.mediafire.com/download/nmani5fh8r73492
1.2 http://www.mediafire.com/download/5nx4kz33g1lhtw1
1.1 https://www.mediafire.com/?jr7oap73xudhsgq
1.0 https://www.mediafire.com/?82qv851hr5dovqi
Downloads for 8190N
1.4.1 in attached files
I haven't N version, so, I can't test the NFC features. Please, try and report...
1.3 http://www.mediafire.com/download/crgome04u1evfoh/Fude_Kernel_1.3_8190N.zip
Source Code
3.0.101 https://github.com/LuuchoRocha/fude_kernel_s3mini
3.0.31 https://github.com/LuuchoRocha/fude_golden_kernel
¿How to...
activate zRAM?
If you want to activate zRAM, a ZIP (beta) is available in attachments.
It will create a 64mb compressed block device. Needs busybox and init.d support
A log can be found in /data/zram.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
activate SWAP?
If you want to activate SWAP, a ZIP (beta) is available in attachments.
It will create a 128mb file for swap in /cache partition. Needs busybox and init.d support
A log can be found in /data/swap.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
NICE! i Will try and report then
I flashed it on stock xnna2 and when i go to about phone it give me kernel version not available beside there is no button light
Ahmed.ragab said:
I flashed it on stock xnna2 and when i go to about phone it give me kernel version not available beside there is no button light
Click to expand...
Click to collapse
Mmm stock xnna2? Can you give me a link to the rom? I want to try with it but I can't find it....
The "unavailable" on the kernel version is an issue about the name but nothing else...
I will fix that in the next version...
What do you want to say with button light? The capacitive buttons light doesn't turn on never?
http://live.samsung-updates.com/det...8190XXANA2.htmlQUOTE=LuuchoRocha;51468798]Mmm stock xnna2? Can you give me a link to the rom? I want to try with it but I can't find it....
The "unavailable" on the kernel version is an issue about the name but nothing else...
I will fix that in the next version...
What do you want to say with button light? The capacitive buttons light doesn't turn on never?[/QUOTE]
Yes never turned on
Here is the link
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
LuuchoRocha said:
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
Click to expand...
Click to collapse
Sorry but I'm using stock amj3 kernel now
what about overclock?
i really need more cpu speed for smooth games.
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
+1
Sent from my GT-I8190 using XDA Premium 4 mobile app
If you can overclock the stock ana2 kernel, you will be the best dev ever
Sent from my GT-I8190 using XDA Premium 4 mobile app
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
you have clearly not done any research on the subject of overclocking this phone
please take some time to read up on the subject of overclocking before you go requesting for it
as for making request
at no point should you forget that developers on here have their own lives
the work they do here is a hobby
they do not get paid to do this work
keep that in mind at all times
efaustino84 said:
you have clearly not done any research on the subject of overclocking this phone
please take some time to read up on the subject of overclocking before you go requesting for it
as for making request
at no point should you forget that developers on here have their own lives
the work they do here is a hobby
they do not get paid to do this work
keep that in mind at all times
Click to expand...
Click to collapse
Yeah, I know that it's unstable and a little dangerous to overclock this phone, but it shouldn't harm the device to go to 1.2ghz, right?
Sent from my GT-I8190 using XDA Premium 4 mobile app
koragg97 said:
Yeah, I know that it's unstable and a little dangerous to overclock this phone, but it shouldn't harm the device to go to 1.2ghz, right?
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
True :thumbup:
Only battery will drain faster thats all if kernel OC is good!!
Sent from my GT-I8190 using XDA Premium 4 mobile app
galaxy mini said:
True :thumbup:
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my statement still stands unless you can provide proof against it
my apologies to the OP i know i have gone off topic
efaustino84 said:
my statement still stands unless you can provide proof against it
my apologies to the OP i know i have gone off topic
Click to expand...
Click to collapse
No buddy you get me wrong...
I totaly agree with you
Sent from my GT-I8190 using XDA Premium 4 mobile app
galaxy mini said:
No buddy you get me wrong...
I totaly agree with you
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok :good:
LuuchoRocha said:
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
Click to expand...
Click to collapse
here you go mate,and thanks for your work BTW:good:
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
Overclock the Mini S III is a hard work and probably not feasible due to battery drain ... On the other hand, I have my device little while ago and do not want to damage it yet
I'm sorry but I can't provide overclock for our device...
Still, I'll take a look about it.
LuuchoRocha said:
Overclock the Mini S III is a hard work and probably not feasible due to battery drain ... On the other hand, I have my device little while ago and do not want to damage it yet
I'm sorry but I can't provide overclock for our device...
Still, I'll take a look about it.
Click to expand...
Click to collapse
No problem man, we're just asking :good:
Btw is this kernel a modded ANA2 one? Both of them are 3.0.3.1, but still better ask
Sent from my GT-I8190 using XDA Premium 4 mobile app
It's builded from the lastest samsung sources
---KITKAT KERNEL---
By @airidosas252
I'm glad to introduce first custom kernel at XDA for our LG Optimus L7 II (model P710)
Disclaimer:
HTML:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features of this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
-------------------------------------------------------------------------------------------------------------
HTML:
My work done ever since now:
After having problems with Wi-Fi, now kernel is kinda universal,
since it accepts any modules available in /system/lib/modules folder.
Thanks to workaround, I had succesfully disabled vermagic checking
and Wi-Fi is functional and kernel is fully functional now.
Overclocking is still very basic and I don't think I'll be able to go any
further.
-------------------------------------------------------------------------------------------------------------
This kernel now moved out of ALPHA stage. Now it's in BETA stage.
Changes in my kernel (v 0.3):
-Further optimizations
-CPU overclock to 1036 Mhz
-GPU overclock is fixed now (available steppings: 320, 400, 450 MHz)
-USB OTG support (you need to fix permissions using USB Host Check app
-Fast charge
-USB HID support
Now available features in my kernel (changed in 0.2):
-Now it is much stable than it was before
-Much more responsive to heavy CPU tasks
-UI performance improvements
-Battery life might improved a little bit
-Drivers are optimized using additional ARM flags
-Different memory allocator (SLAB)
-Kernel version 3.4.2
-FRandom (needs testing)
-Used different toolchain with -O2 optimizations (Linaro 4.7.4)
-Enabled NTFS file system, prebuilt exFAT file system support (exFAT is probably only available in v.0.21)
-Additional GPU clocks for better performance: 320 Mhz, 400 Mhz, 500 Mhz.
-Additional CPU governors: lulzactive, Smartassh3, ondemandX, smartass2, lulzactive,
-Some additional IO schedulers: sio, sioplus, vr
-Universal modules support (can be buggy in later revisions)
-Fully working ZRAM (rather slow at the moment)
-SWAP
-Smaller kernel footprint thanks to the Linaro toolchain
Bugs:
-USB OTG still could not work. Drivers are very buggy. Always use powered USB Hub.
-If you want to use exFAT formatted sdcard, you'll need to mount it manually. Otherwise the system won't see it.
Post bugs in the comments section below. I will always read them all.
Link for the source code is https://drive.google.com/file/d/0BzS7kS2MZuyucVpyNWlvVThOSHM/view?usp=sharing
Just flash this flashable zip through CWM and you're good to go.
I know there are ROM compatibility problems,but will this kernel work on a LG L7 II Dual? (P715/P716)
It should work, but I can't assure, if dual-sim functionality will work.
Just make sure to make backup of your existing kernel, in case something goes wrong.
Sent from my LG-P710 using XDA Free mobile app
Where is the source code ??? By law, you must provide it
I'm not at home. It will be provided.
Sent from my LG-P710 using XDA Free mobile app
im going to test your work mate,thanks for your time and effort :good: i hope this solves some problems with the lag on kit kat
Don't expect huge improvement, since lag is related to OS itself. But thanks for your effort.
Sent from my LG-P710 using XDA Free mobile app
I flashed this kernel. It worked pretty well the performance of temple run speeded up!
But, i have a doubt. I flashed this kernel. If i have to get back to the previous kernel, what will i have to do? I have nandroid backup, is it enough or i missed something?
Sent from my p714 running p710 KK stock rom.
If I remember right, there is boot image compressed seperately, when you make nandroid backup.
Didn't do nandroid backup for a long time, so can't tell everything precisely.
Sent from my LG-P710 using XDA Free mobile app
Is there option to add ''2 ways calls recording'' to this kernel?
Now I don't think it's possible. Will look, how to implement this feature in next kernel release.
Sent from my LG-P710 using XDA Free mobile app
Sottam said:
I flashed this kernel. It worked pretty well the performance of temple run speeded up!
But, i have a doubt. I flashed this kernel. If i have to get back to the previous kernel, what will i have to do? I have nandroid backup, is it enough or i missed something?
Sent from my p714 running p710 KK stock rom.
Click to expand...
Click to collapse
Should be pretty simple IMO: Take boot.image from your nandroid backup, and insert it into airidosas252's zip image instead of the boot.image that's there. Then you can flash it via CWM the same way.
I think I won't get back to Jelly Bean. Now I'm starting to like my phone.
I guess new governors helped quite a bit. Been using VR as IO scheduler and smartassh3 as CPU governor.
I'm about upping to 3.4.10 and patch my kernel with -O2 optimizations.
Sent from my LG-P710 using XDA Free mobile app
This thread should definety be placed in Android Development.
I installed the latest kernel, it really helps a lot on KK. Great job, keep up!
Thanks man. It is really great to hear positive feedback about my job.
Sent from my LG-P710 using XDA Free mobile app
Finally the performance is fixed and a bit better scores. :>
With original kernel I wasn't even getting 400 in multi-core scores. (Geekbench 3)
Sent from my LG-P710 using XDA Free mobile app
airidosas252 said:
Finally the performance is fixed and a bit better scores. :>
With original kernel I wasn't even getting 400 in multi-core scores. (Geekbench 3)
Sent from my LG-P710 using XDA Free mobile app
Click to expand...
Click to collapse
Will you release a new version, or is this the previous?
The same kernel I posted in this thread.
Sent from my LG-P710 using XDA Free mobile app
How can i root my device with Android 4.4.2?
I tried some programms but nothing helped...
sorry for my bad english :cyclops:
There are no root apps, which are capable of rooting this firmware.
There are several solutions to this, like flashing back Jelly Bean, rooting it, then flashing Kitkat flashable zip through CWM.
Sent from my LG-P710 using XDA Free mobile app