I just spent 4 hours doing this to my own phone. YMMV. I thought I would share the step by step instructions that I spent the last few hours trying to figure out. This will also work to get to S-Off from HBOOT 2.28 (which was my goal, but also to give instructions to S-ON easily as well for returning for warranty, etc).
This assumes you already know how to load a rom, and are comfortable with the adb and fastboot commands (since you are here wanting to return to stock). This also assumes you have a booting rom, and/or access to side load a rom onto the sd card, and have access to recovery still.
CRITICAL: DO NOT DO THE S-ON PROCEDURE AT THE END UNTIL YOU CAN BOOT THE STOCK RUU!
http://forum.xda-developers.com/showthread.php?t=2260154&highlight=stock+ota
Download and copy ota file from the link above to root of sd card
flash stock ota from recovery
Extract the boot.img from the ota.zip using any program other than windows (winzip, winrar). Flash the boot.img: fastboot flash boot boot.img
If you can boot into the ota stock rom, proceed to the S-Off section.
flash mainver.zip if you get errors about mainver (http://androidforums.com/rezound-al...ndly-root-guide-start-finish.html#post3997776)
S-Off (http://unlimited.io/juopunutbear.htm)
-> Windows files: http://forum.xda-developers.com/showthread.php?p=40950251#post40950251
-> Run the controlbear.exe as administrator!
Load ruu (605.2)... a simple search should find lots of sources. (load as PH98IMG.zip on root of internal storage; reboot to hboot by shutting down or battery pull, then hold vol down + power, to load stock ruu - TAKES A LONG TIME!)
Once successfully booting to the RUU, then go ahead and S-ON:
S-on
http://androidforums.com/rezound-al...-off-guide-info-return-stock.html#post4394129
*************DO NOT S-ON UNTIL RUU IS LOADED AND CONFIRMED BOOTING!!!!**************
Good luck! As usual, I take no responsibility for any problems. I literally just did this to my phone. I was getting tired of the reboots so I figured I would start from scratch...and s-off and I was on 2.28
Great work and links. I personally thank you for your time and effort into doing this for all users as developers can be busy in all aspects. Be it building, work or family I'm sure very many will appreciate this besides myself.
Sent from my P4R4N01D R3D D347H 4.3 using xda app-developers app
I s-off on infection, an AOSP ROM. I do not suggest it if you are just S-Off and nothing else, but in the case of you planning to RUU, it works just fine.
Sent from my ADR6425LVW using xda app-developers app
Uzephi said:
I s-off on infection, an AOSP ROM. I do not suggest it if you are just S-Off and nothing else, but in the case of you planning to RUU, it works just fine.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Yeah I figured the s-off people were just being overly cautious... but I personally would recommend using the know working 100% method... there are a lot of variables that could affect it with other mods I'm sure. Including Infection (which I use and love!)
flamewalker said:
Yeah I figured the s-off people were just being overly cautious... but I personally would recommend using the know working 100% method... there are a lot of variables that could affect it with other mods I'm sure. Including Infection (which I use and love!)
Click to expand...
Click to collapse
Yeah, I was in a pickle and had nothing else to lose, so I just went with it, lol. After I S-Off, recovery couldn't flash boot correctly, until I RUU and reupdated to 2.28
Sent from my ADR6425LVW using xda app-developers app
Uzephi said:
Yeah, I was in a pickle and had nothing else to lose, so I just went with it, lol. After I S-Off, recovery couldn't flash boot correctly, until I RUU and reupdated to 2.28
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Well good to know for those in a pinch thanks for sharing!
Ugh, I had the 4.3 JB flashed on my Rezound.
I now have to return the phone for my phone is being replaced.
I was having tons of issues trying to get stock rom to install until I found this one because I was getting an HBOOT older error.
I was able to successfully install this ROM and flashed boot.img
I cannot get it for the life of me to boot though, it boots to the HTC green and then basically just stays there OR it keeps booting into HBOOT.
I had it RELOCKED before loading the STOCK rom from this post, had to unlock again to flash boot.img
Thanks hopefully for any help.
*** TAMPERED ***
*** UNLOCKED ***
HBOOT - 2.28
RADIO 2.23.10
eMMC-boot
S-ON
To remove the tampered tag and have it say "locked" instead of "relocked" you must S-off.
I don't know why you couldn't boot after flashing the ota.zip from recovery and flashing boot img from hboot as it should boot up.
To use most fastboot commands, you need to be unlocked. The command is "fastboot flash boot boot.img" be sure to have that boot part in there. "Fastboot flash boot.img" will just not work. If you forget the "flash" part, it will just temporarily boot that boot.img once.
Sent from my dlx using xda app-developers app
Related
I'm struggling with all the terminology and methods with flashing. Basically I just wanted root, so I read several different guides and got a rooted status and managed to install the Amon Ra recovery. However my bootloader (also called HBOOT - is that correct?) shows tampered / unlocked now. Basically, I want to flash back to the most current build and try again.
Would the link on the Android Police forums to download RUU 4.03.605.2 be latest Verizon build as if it were fresh out of the box?
I checked on the wiki, but didn't see anything for the Rezound there.
Also, to use this utility, I relock my bootloader using HTCDev and then move this zipped file to my sd card and reboot to the bootloader either using adb or the power + volume down, correct? It will see the zip file and begin flashing or do I run an executable from my PC with the phone connected? I'm not S-Off because I figured that is way above my head at this point.
I appreciate any help anyone can offer.
The tampered just means you have a custom recovery like Amon Ra installed.
Sent from my ADR6425LVW using xda app-developers app
oatlord said:
I'm struggling with all the terminology and methods with flashing. Basically I just wanted root, so I read several different guides and got a rooted status and managed to install the Amon Ra recovery. However my bootloader (also called HBOOT - is that correct?) shows tampered / unlocked now. Basically, I want to flash back to the most current build and try again.
Would the link on the Android Police forums to download RUU 4.03.605.2 be latest Verizon build as if it were fresh out of the box?
I checked on the wiki, but didn't see anything for the Rezound there.
Also, to use this utility, I relock my bootloader using HTCDev and then move this zipped file to my sd card and reboot to the bootloader either using adb or the power + volume down, correct? It will see the zip file and begin flashing or do I run an executable from my PC with the phone connected? I'm not S-Off because I figured that is way above my head at this point.
I appreciate any help anyone can offer.
Click to expand...
Click to collapse
4.03.605..2 is the latest vzw build.
jbh00jh said:
4.03.605..2 is the latest vzw build.
Click to expand...
Click to collapse
If I want to load that RUU, do I have to relock my bootloader? Will I be able to load the file from the Android Police forum without being S-OFF since I've rooted and loaded a recovery?
oatlord said:
If I want to load that RUU, do I have to relock my bootloader? Will I be able to load the file from the Android Police forum without being S-OFF since I've rooted and loaded a recovery?
Click to expand...
Click to collapse
Having S-OFF negates the need to relock your bootloader.
You should be able to flash the "RUU" zip file with your phone in its current condition.
If you do some research in this section in the S-OFF threads, you'll get some good info about not re locking after s-off.
Re-locking is only necessary if you don't have s-off.
Sent from my ADR6425LVW using Tapatalk 2
to reinstall the RUU, first make sure you have fastboot on your PC and your phone is in the fastboot menu of the bootloader and connected to your PC. It should say "fastboot USB". (If you don't have the HTC drivers installed, download HTC Sync 3.0 and that should install it. I haven't gotten it to work on Windows 8 so if you use Windows 8 use these drivers)
Open a command prompt, change the directory to where your fastboot.exe is (example: cd c:\fastboot_directory). Type in 'fastboot oem lock'. Your phone will restart, then boot up. Turn it off, reboot to the bootloader and make sure it says *RELOCKED* on the top. Then, go back to fastboot and in your cmd window, type in 'fastboot oem rebootRUU'. Your phone will reboot and show a black screen with a grey HTC logo. Copy the RUU (doesn't matter if it's named PH98IMG.zip or something else) into the same folder as fastboot.exe and type in 'fastboot flash zip ruu_zip_name.zip' (obviously replacing ruu_zip_name.zip with the zip's actual name). The terminal will start sending the zip and details will be displayed on your computer screen. Your phone will also have a progress bar. Once the terminal on your computer says it's finished, you can reboot your phone.
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Yes, you can use the above method fine. However, going S-Off is very easy. It seems like a daunting task, but if you read the directions thoroughly it is very easy. I used the .5 version of Juopunutbear and it worked without a hitch. You are already unlocked and rooted, so if you S-Off, you won't have to do it all over again. From there you can flash the RUU, flash a FLASHABLE version of AR 3.15, then reflash any rom that you want. You will only get the benefit from global with roms that are built aroung the .2 base, but you will get updated radios. I haven't honestly noticed much of a difference with the new radios though.
layneja said:
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Click to expand...
Click to collapse
Flash stock recovery here's a link http://www.mediafire.com/?wb21d2gdurui2c6 then lock bootloader. (Fastboot OEM lock)
After locking bootloader(cuz your s-on) rename the ruu you downloaded from android police To PH98IMG put on your sd return sd phone boot into bootloader run update, if it stops and powers off mid update remove battery and start it again, It flashed the hboot first then you gotta go back In And finish the update.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
---------- Post added at 11:41 AM ---------- Previous post was at 10:59 AM ----------
layneja said:
I am currently S-On, unlocked, running Newts One XXX with the Global OTA (4.03.605) Sense 4 Kernel. I would now like to get the 4.03.605.2 firmware installed. Would the procedure described above work for my situation or is there another method I can use.
My next leap is to go S-off but for now I would just like to get the firmware updated before reflashing Newts.
Thanks in advance.
Click to expand...
Click to collapse
Also to avoid any problems do a factory reset in hboot after update is installed. Being that we're s-on when we re-unlock it does it for us but I've heard some people are having problems after the ruu if they didn't FDR while on stock recovery.. just a heads up
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
famouscollin said:
Flash stock recovery here's a link (removed cause I'm too new) then lock bootloader. (Fastboot OEM lock)
After locking bootloader(cuz your s-on) rename the ruu you downloaded from android police To PH98IMG put on your sd return sd phone boot into bootloader run update, if it stops and powers off mid update remove battery and start it again, It flashed the hboot first then you gotta go back In And finish the update.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
---------- Post added at 11:41 AM ---------- Previous post was at 10:59 AM ----------
Also to avoid any problems do a factory reset in hboot after update is installed. Being that we're s-on when we re-unlock it does it for us but I've heard some people are having problems after the ruu if they didn't FDR while on stock recovery.. just a heads up
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
Click to expand...
Click to collapse
Just to clarify: when you reboot using "adb reboot" or power + volume down, are you booting into the bootloader or hboot? I've read the guides but still a little confused there.
Also, what does the stock recovery do versus something like Amon Ra? Does the stock recovery allow for creating backups and what-not? Sorry to be a total noob here. I can bake cookies or something for you all for your help, hehe.
WookieFan said:
Having S-OFF negates the need to relock your bootloader.
You should be able to flash the "RUU" zip file with your phone in its current condition.
If you do some research in this section in the S-OFF threads, you'll get some good info about not re locking after s-off.
Re-locking is only necessary if you don't have s-off.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
if you're s-off you shouldn't have to unlock.
---------- Post added at 07:17 PM ---------- Previous post was at 07:11 PM ----------
oatlord said:
Just to clarify: when you reboot using "adb reboot" or power + volume down, are you booting into the bootloader or hboot? I've read the guides but still a little confused there.
Also, what does the stock recovery do versus something like Amon Ra? Does the stock recovery allow for creating backups and what-not? Sorry to be a total noob here. I can bake cookies or something for you all for your help, hehe.
Click to expand...
Click to collapse
The bootloader is the hboot. You power on holding vol down to get there.
The stock recovery does not allow you to create backups, or do much at all I'm pretty sure. That is why we have custom ones.
If i helped throw me a thanks
iamwalterwhite said:
Yes, you can use the above method fine. However, going S-Off is very easy. It seems like a daunting task, but if you read the directions thoroughly it is very easy. I used the .5 version of Juopunutbear and it worked without a hitch. You are already unlocked and rooted, so if you S-Off, you won't have to do it all over again. From there you can flash the RUU, flash a FLASHABLE version of AR 3.15, then reflash any rom that you want. You will only get the benefit from global with roms that are built aroung the .2 base, but you will get updated radios. I haven't honestly noticed much of a difference with the new radios though.
Click to expand...
Click to collapse
Do you mean flash the RUU in the bootloader and then the recovery also in bootloader? i only ask cause im at school and i forgot my microsd adapter so i cant rename the zips so that I can flash both of them from there, but if i can do it from recovery then im set
xxtsxx said:
Do you mean flash the RUU in the bootloader and then the recovery also in bootloader? i only ask cause im at school and i forgot my microsd adapter so i cant rename the zips so that I can flash both of them from there, but if i can do it from recovery then im set
Click to expand...
Click to collapse
Sorry that you never got an answer to this. Yes, you should flash both recovery (stock) and the RUU as PH98IMG zip files. Wait to start this process until you have a pc/sd card reader available. Trying this without those basic tools is going to make this a frustrating process for you.
Sent from my ADR6425LVW using Tapatalk 2
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
What happens when you try to run ruu
Sent from my EVO using xda app-developers app
PathogenVirdae said:
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
Click to expand...
Click to collapse
Update your twrp to 2.3.3.0 or if you want to return to stock you have to relock your bootloader
Sent from my PoS MoPho
TWRP won't take the update for whatever reason, and I can't get fastboot to work over this machine, so I'm thinking about running linux to get into the phone a little easier (hopefully.) I either have to wait til I can use my roommates machine, or start installing a dual boot
Have you tried goomanager to update twrp?
Yea, it downloads the file, gives a message stating it has been installed, then it does nothing. No reboot. when I manually reboot into recovery, it still sits at previous version.
Do you have adb setup on your PC? Also do you have the correct drivers installed ?
#Root-Hack_Mod*Always=SG3
Ok, so finally got my fastboot to work
"Fastboot oem lock"
Worked. Awesome...now it's stuck in a bootloader loop. Won't let me into recovery, but I can still get to fastboot. I can't get to recovery, factory reset, etc. just hboot and fastboot.
screen shows tampered relocked and security warning.
Any ideas? I can get it to flash the PJ75IMG.zip but it says main version is older! or something to that effect and it fails. Any ideas?
UPDATE: Got it unlocked again and it booted back into OS.
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
PathogenVirdae said:
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
Click to expand...
Click to collapse
Did you fastboot flash the stock recovery after you relocked?
bigdaddy619 said:
Did you fastboot flash the stock recovery after you relocked?
Click to expand...
Click to collapse
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
PathogenVirdae said:
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Click to expand...
Click to collapse
Well since you are s-on you can't flash PJ75IMG files from bootloader if you want to update your phone to the latest OTA you have to relock your bootloader and reflash the stock recovery and take the OTA then unlock and flash twrp again.
If you click the link in my sig and download the 3.15/2.09 hboot file there is a stock recovery in the files as well as instructions on how to flash it
Sent from my PoS MoPho
---------- Post added at 09:19 AM ---------- Previous post was at 09:15 AM ----------
mrlakadaddy said:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Or this ^^^^ a much better choice
Sent from my PoS MoPho
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
PathogenVirdae said:
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
Click to expand...
Click to collapse
There is a stock recovery on the files I recommend as well as the commands to use
Sent from my PoS MoPho
So I'm trying to run the Dirty Racun method, and I'm sitting at this part "sudo ./fastboot flash zip RUU.zip"
How long should this normally take? The only thing I can see is Sending 'zip' (filesize) and htc on the phone. Does this process take awhile? >20 mins? Is there some kind of progress meter?
Update:// So apparently I'm stuck. DirtyRacun seems to hang on the RUU flash. BigDaddy, it also stops half way thru the stock recovery flash.
Need to get back to stock from twrp 2.5 w dumlock. Long story short, I was given a Rezound last year by a friend then I upgraded to Galaxy S4 and now my friend's mom needs the Rezound bc her phone is acting up. I need to get back to stock ASAP but I think Dumlock has thrown me for a loop when trying to fastboot oem lock before I run RUU.exe. I tried the restore recovery and restore boot in TWRP but when I moved my SD card from the rezound to my S4 I wiped all the data. Yes, im an idiot and apparently dumlock means dummies like me will lock up their phones. LoLz! Can someone walk me through please?
Sent from my SCH-I545 using xda app-developers app
What do you mean unDumlock? Dumlock is just a rom mod to assist in flashing with an s-on device. Just re-lock and run an RUU. Before you do though, just going to see if I can give you some advice, What your model/radio information from hboot in the upper left hand portion?
Ok Im embarrassed to tell u my initial mistake but I was able to fastboot oem lock and now I am getting the hboot error when I run the RUU.exe. my hboot is 2.27 and my radio is 2.22.10.0801r/2.22.10.0803r
Sent from my SCH-I545 using xda app-developers app
get stock
If your bootup screen for sure says Locked or Relocked, then you can
find here on XDA factory install of 4.03.605.2.
First one came from Android Police. Not the RUU executable, but the zip.
Use it as a PH98IMG.zip located only on the removable sdCard.
It should load and install.
I have been having the worst time trying to take my Rezound back to stock. I rooted it a long while ago and am now stuck. I was able to relock but still at s-on and I cant seem to find the right RUU exe file to load the system back to stock. Current info is as follows;
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Image version 3.14.605.12
I am a complete noob so I will need as much simple directions as possible. I am desperate at this point since I cant seem to get it to reload the stock. Every time I use the RUU.exe files
RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe
Found on androidfiles.org/ruu/?developer=Vigor or any of the other ones it fails. Fortunately I have not bricked the phone yet but I am running out of options since android police site has one but says not to use it : This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method).
Help please!!!
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Beyond5150 said:
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Click to expand...
Click to collapse
After you rename it place it on the root directory of the SD card. Then power phone off. Then press volume down + power so it boots into bootloader. There it should ask if you want to update. Tell it yes. It won't brick you as its the same s/w you seem to be on. Worst case it won't flash.
Edit: make sure you verify the md5!
Sent from my ADR6425LVW using xda premium
What message do you get when running the RUU, also what Rom were you running prior to relocking?
Sent from my ADR6425LVW using xda app-developers app
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
izzaeroth said:
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Remember to flash a ph98img zip RUU, the bootloader must be relocked and internal storage will also be completely wiped. Backup the contents in recovery using usb mass storage mounts.
Subiesaurus Rex said:
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
Click to expand...
Click to collapse
Sounds like all that needs done is a factory reset(wipe caches+data) and wipe system. Re-flash a Sense rom and fastboot flash the matching boot.img. Try my rom Viral OTA, just the data/system wipes prior to flashing and it willk get you back up to 100%. Rememer to reboot to bootloader if using TWRP.
I am selling one of my Rezounds I need to return it to mostly stock.
Before installing the latest Infection rom I was on the current OTA rom. Basically I think all I need to do is reflash the stock recovery image and the current OTA rom and if needed go back to locked. Problem is, I don't have a copy of the recovery.img from the current OTA rom. Can anybody link me to it. Thanks
Sent from my Infected Rezound
Here is a post with the full OTApkg.zip for 4.05.605.14:
http://forum.xda-developers.com/showpost.php?p=40757466&postcount=19
If you extract the firmware.zip, there is the recovery.img which you can either put into a custom ph98img.zip and run in hboot or flash it from your computer using adb stuff. I recently had to restore my Rez back to stock as it is getting returned to Verizon for a replacement. I used the ph98img route to reinstall recovery after unrooting. I also then had to S-on the phone so I had to make sure it was bone stock so the S-on didn't brick it.
ETA: I'm not sure if that full OTApkg.zip will be enough to get you back to stock but what I had done in the past was to flash this stock rooted rom with Amonra 3.16 http://forum.xda-developers.com/showpost.php?p=40941755&postcount=1 ( I was already on 4.05.605.14), do the full unroot option using the supersu app that was already there, and then flash the stock recovery and I was back to fully stock.
---------- Post added at 12:32 PM ---------- Previous post was at 12:09 PM ----------
Any chance your phone was S-off?
mikeyk101 said:
Here is a post with the full OTApkg.zip for 4.05.605.14:
http://forum.xda-developers.com/showpost.php?p=40757466&postcount=19
If you extract the firmware.zip, there is the recovery.img which you can either put into a custom ph98img.zip and run in hboot or flash it from your computer using adb stuff. I recently had to restore my Rez back to stock as it is getting returned to Verizon for a replacement. I used the ph98img route to reinstall recovery after unrooting. I also then had to S-on the phone so I had to make sure it was bone stock so the S-on didn't brick it.
ETA: I'm not sure if that full OTApkg.zip will be enough to get you back to stock but what I had done in the past was to flash this stock rooted rom with Amonra 3.16 http://forum.xda-developers.com/showpost.php?p=40941755&postcount=1 ( I was already on 4.05.605.14), do the full unroot option using the supersu app that was already there, and then flash the stock recovery and I was back to fully stock.
---------- Post added at 12:32 PM ---------- Previous post was at 12:09 PM ----------
Any chance your phone was S-off?
Click to expand...
Click to collapse
Thanks... I am S-ON but that should really be all I need... I don't really need to go 100% pure stock, but if I can get it close that will work. Replacing the recovery image and leaving it S-ON, then flash the Stock OTA Rooted ROM from this thread: http://forum.xda-developers.com/showthread.php?t=2260154 and I think I will be close enough to sell it. If someone wants it with a custom ROM I can just leave TWRP and Infection, or whatever ROM they want, but I just need a quick option to return to "stock" if the buyer wants.
acejavelin said:
Thanks... I am S-ON but that should really be all I need... I don't really need to go 100% pure stock, but if I can get it close that will work. Replacing the recovery image and leaving it S-ON, then flash the Stock OTA Rooted ROM from this thread: http://forum.xda-developers.com/showthread.php?t=2260154 and I think I will be close enough to sell it. If someone wants it with a custom ROM I can just leave TWRP and Infection, or whatever ROM they want, but I just need a quick option to return to "stock" if the buyer wants.
Click to expand...
Click to collapse
You may want to flash the rooted stock before replacing the recovery back to stock. I don't know if the stock recovery will allow it...
mikeyk101 said:
You may want to flash the rooted stock before replacing the recovery back to stock. I don't know if the stock recovery will allow it...
Click to expand...
Click to collapse
The beauty of being unlocked is it doesn't matter... All I need to do is go into fastboot and use "fastboot boot recovery.img" for TWRP and I can flash anything, irregardless of what the installed recovery allows. But thanks for the warning, this is probably what I would do anyway.
Doh!, I completely forgot about that way... Yup, that would work as well
I'm trying to give this phone to my buddy. Haven't used it since I got the S4, and he is still using a Dinc. I tried what was listed here, but it's only made things worse. I was on Stock 4.03.605 (leaked Global RUU) unlocked, rooted, s-on. I tried updating the firmware with the OTAzip. I made the PH98IMG.zip, and ran it through the bootloader. It only updated Hboot from 2.7 to 2.8. It did NOT give me 4.05.605 like I was looking for. I tried to run the Global Stock rom but got stuck in a white HTC screen. The only thing I can make work right now is a viperrom, but wifi will not turn on. I was hoping to give this to him as close to stock, but without wifi, it's not going to be very useful.
Currently I have it locked s-on with stock recovery, but I can unlock and put amon ra back on it. I use a mac so commands are a bit different for me, but I know the basics and what to on the mac (mostly). Any help would be appreciated. I tried to run the leaked global RUU again to reset it, but because the Hboot updated, it won't run it. I can't find an RUU for 4.05.605
318sugarhill said:
I'm trying to give this phone to my buddy. Haven't used it since I got the S4, and he is still using a Dinc. I tried what was listed here, but it's only made things worse. I was on Stock 4.03.605 (leaked Global RUU) unlocked, rooted, s-on. I tried updating the firmware with the OTAzip. I made the PH98IMG.zip, and ran it through the bootloader. It only updated Hboot from 2.7 to 2.8. It did NOT give me 4.05.605 like I was looking for. I tried to run the Global Stock rom but got stuck in a white HTC screen. The only thing I can make work right now is a viperrom, but wifi will not turn on. I was hoping to give this to him as close to stock, but without wifi, it's not going to be very useful.
Currently I have it locked s-on with stock recovery, but I can unlock and put amon ra back on it. I use a mac so commands are a bit different for me, but I know the basics and what to on the mac (mostly). Any help would be appreciated. I tried to run the leaked global RUU again to reset it, but because the Hboot updated, it won't run it. I can't find an RUU for 4.05.605
Click to expand...
Click to collapse
My circumstance was very specific, this thread was not really intended to be a guide to take any version of software to another, I already had the firmware (HBoot & radios) for 4.5.605.14, just needed a few pieces to get back to "stockish"... There are other ways to return to stock for different software versions and this thread doesn't address any of those.
The OTApkg.zip is only for going from 3.14.605.13 to 4.5.605.14, no other combinations of versions will work properly. I am surprised that HBoot updated... what radios are you on now? If the radios updated then you might be OK, you can just unlock, then fastboot boot recovery.img of TWRP and flash in the stock/rooted 4.5.605.14 ROM (NOT an RUU, but just the ROM), otherwise you could be in a situation where you need to S-OFF and flash radios and tweak from there. If your HBoot updated then the leaked RUU won't work either, you could be in a tight spot.
BTW, the reason Viper won't work is you likely have a kernel mismatch, to install a ROM on an S-ON Rezound you need to flash the boot.img separately, that is where the kernel is, but that also requires you to be unlocked by HTCdev.
acejavelin said:
My circumstance was very specific, this thread was not really intended to be a guide to take any version of software to another, I already had the firmware (HBoot & radios) for 4.5.605.14, just needed a few pieces to get back to "stockish"... There are other ways to return to stock for different software versions and this thread doesn't address any of those.
The OTApkg.zip is only for going from 3.14.605.13 to 4.5.605.14, no other combinations of versions will work properly. I am surprised that HBoot updated... what radios are you on now? If the radios updated then you might be OK, you can just unlock, then fastboot boot recovery.img of TWRP and flash in the stock/rooted 4.5.605.14 ROM (NOT an RUU, but just the ROM), otherwise you could be in a situation where you need to S-OFF and flash radios and tweak from there. If your HBoot updated then the leaked RUU won't work either, you could be in a tight spot.
BTW, the reason Viper won't work is you likely have a kernel mismatch, to install a ROM on an S-ON Rezound you need to flash the boot.img separately, that is where the kernel is, but that also requires you to be unlocked by HTCdev.
Click to expand...
Click to collapse
Damn....I have tried to flash the kernel (boot.img) through the fastboot command, but it never works right and leaves me stuck with a white HTC screen. Again, if it's bricked, it's not the end of the world for me as I upgraded to the S4, but my buddy was looking forward to 4g.
Basebands are 2.23.10.0123r, and 2.23.10.0124r
Well I think you're in luck, you have the firmware for the latest software installed... hboot and radios match for 4.5.605.14, all you need now is to unlock and flash a correct ROM! Working so I can't grab link right now, just get unlocked via HTCdev and post when that's done... all isn't list yet!
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
acejavelin said:
Well I think you're in luck, you have the firmware for the latest software installed... hboot and radios match for 4.5.605.14, all you need now is to unlock and flash a correct ROM! Working so I can't grab link right now, just get unlocked via HTCdev and post when that's done... all isn't list yet!
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
I just unlocked again..I don't need the HTCdev site anymore. The token and all that jazz is all saved to an android folder on the my macHD. I downloaded TRWP. Should I flash that next?
318sugarhill said:
I just unlocked again..I don't need the HTCdev site anymore. The token and all that jazz is all saved to an android folder on the my macHD. I downloaded TRWP. Should I flash that next?
Click to expand...
Click to collapse
If you wish..
Actually installing a custom recovery is not required as long as you can fastboot boot the recovery image.
Did you want to return to mostly stock, or did you want to run a custom ROM like Infection Or something else?
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
acejavelin said:
If you wish..
Actually installing a custom recovery is not required as long as you can fastboot boot the recovery image.
Did you want to return to mostly stock, or did you want to run a custom ROM like Infection Or something else?
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
I was looking for stock. 4.05.605 is ideal so he can play with it if he wishes. I don't want to have to field questions once its his. I don't mind helping him, but I don't want to cause him issues he's not looking for.
I have the image downloaded. How do I fastboot boot the recovery? Just ./fastboot boot recovery.img (as i have renamed the img as recovery.img)
Use this one
http://forum.xda-developers.com/showthread.php?t=2260154
[ROM] OTA-Global-Stock-4.05.605.14 710RD-Rooted 5/1/13
Flash ROM, extract boot.img and flash then should be goof to go.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
acejavelin said:
Use this one
http://forum.xda-developers.com/showthread.php?t=2260154
[ROM] OTA-Global-Stock-4.05.605.14 710RD-Rooted 5/1/13
Flash ROM, extract boot.img and flash then should be goof to go.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
I tried this earlier, but I get the white HTC screen lockup. When you say extract boot.img, you mean unzip the download, pull out the boot.img and put it in my android folder to fastboot flash correct? The command I use is ./fastboot flash boot boot.img. It appears everything works, but it never boots. Just gets stuck in the white screen.
I'm downloading it now, should be about 14 more minutes. I will try it all again, and see what happens. Fingers crossed. let me know if my commands are wrong or I'm missing anything. the ./ is needed for mac.
If you load TWRP via Fastboot boot it will flash boot.img for you, if you load if from hboot you have to flash manually.
Before flashing ROM, download and flash the CleanWipe x5 script found in a thread on the development forum.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
acejavelin said:
If you load TWRP via Fastboot boot it will flash boot.img for you.
Before flashing ROM, download and flash the CleanWipe x5 script found in a thread on the development forum.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
I flashed twrp via fastboot flash recovery. I'm missing something. what is fastboot boot for TWRP?
318sugarhill said:
I flashed twrp via fastboot flash recovery. I'm missing something. what is fastboot boot for TWRP?
Click to expand...
Click to collapse
That works, just requires extra steps. I don't flash recovery anymore, you can go into fastboot on the phone, then execute fastboot boot recovery.img from PC, this gives an unlocked HTC phone temporary S-OFF saving steps of flashing boot.img seperately and avoiding the dreaded Tampered flag (if it hasn't been set).
Lots of ways to skin a cat I guess.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
acejavelin said:
That works, just requires extra steps. I don't flash recovery anymore, you can go into fastboot on the phone, then execute fastboot boot recovery.img from PC, this gives an unlocked HTC phone temporary S-OFF saving steps of flashing boot.img seperately and avoiding the dreaded Tampered flag (if it hasn't been set).
Lots of ways to skin a cat I guess.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app
Click to expand...
Click to collapse
I have the tampered flag. But I don't care about that. I'm long past warranty anyway. But when I use the command ./fastboot boot recovery.img it says cannot load "recovery.img"
318sugarhill said:
I have the tampered flag. But I don't care about that. I'm long past warranty anyway. But when I use the command ./fastboot boot recovery.img it says cannot load "recovery.img"
Click to expand...
Click to collapse
You need to extract the recovery.img file from the TWRP zip and put it in the fastboot directory.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app