Just thought that I would share this since mine turned out pretty good. I plasti dip my back cover and then painted it. Turned out really good and does not effect my wireless charging. What do you guys think? Oh yeah, it can be peeled off if since the plasti dip is the first layer.
I think you should have picked a better color
Looks good, hows the grip?
Does it affect the IR blaster?
Sent from my VS980 4G using XDA Premium 4 mobile app
lumpysherman said:
Does it affect the IR blaster?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When you take the cover off there is actually a plastic piece on the top of the cover where the IR sensor would be. Take that piece out before you do anything and then just put it back when you are done. Will not effect IR Blaster.
IamPro said:
I think you should have picked a better color
Looks good, hows the grip?
Click to expand...
Click to collapse
My phone my color
It really looks good in person. The grip is great. It wont slide around if it was on a smooth surface. It really feels like a really high end battery cover.
Ummm...I still prefer the stock look since that material doesn't look like it would be as comfortable.
May I know why ya had to paint and plasti-Dip?
Is plasti-Dip enough?
Also, is removing the back cover that easy? I'm having doubts on my international set..
Btw, thanks for posting the pics!
MasK said:
May I know why ya had to paint and plasti-Dip?
Is plasti-Dip enough?
Also, is removing the back cover that easy? I'm having doubts on my international set..
Btw, thanks for posting the pics!
Click to expand...
Click to collapse
I plasti dip first so if I decided to take it off it would come off easy since the first layer is plasti dip and not just paint. You can definitely just use plasti dip but be aware that it might not last as long since you are constantly putting it you pocket. The edges might start to come off. After I painted the cover with a couple of coats, I also did a couple of coats of clear finish on it just to make sure.
Removing the back cover on my Verizon LG G2 was very easy. I picked a corner and was able to pull away the corner just enough to slide a plastic wedge in, and then i slowly and patiently moved it along the sides separating the cover from the phone. Just be careful and go slow and you shouldnt have any problems.
I wish I had the testicular fortitude to even think about trying it. Glad it worked out for you as that back has to be my one and only annoyance with the phone (other than the small buttons - but wireless charging is a nice trade off if that's what it took).
kraamerica said:
I wish I had the testicular fortitude to even think about trying it. Glad it worked out for you as that back has to be my one and only annoyance with the phone (other than the small buttons - but wireless charging is a nice trade off if that's what it took).
Click to expand...
Click to collapse
Cosmo Kramer, you are the Assman
tujqM2u-BVo
Should have taken during pictures..!
Awesome. I did the same thing on my old GS3 but it ended up peeling off in a week from going in and out of my pocket. Other than that it was sweet.
Sent from my LG-D801 using Tapatalk 4
Related
I have the vibrant and it's an amazing phone, etc etc etc.
The only thing is that my dad used it before i got it and he didn't have it in a case so, although the screen is virtually impeccable, the battery cover has some light scratches and scuffs.
What are some tips you guys have to inexpensively rid the battery door of light scratches?
You could maybe give car wax a try if you have any handy
Sent from my SGH-T959 using XDA App
ZombiiBite said:
You could maybe give car wax a try if you have any handy
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
that's not a bad idea actually...
i shall run to the garage right after i hit the reply button. ahaha.
You could use the spare batter cover that comes with the phone.
ColorNapkin said:
You could use the spare batter cover that comes with the phone.
Click to expand...
Click to collapse
can't. i got the phone from my dad who got it second hand, unfortunately, with out the spare cover..
Work for ya?
Not bad, not bad.. it's not perfect as there are some very light scratches but it brought it down a whole lot. Great for such a "ghetto" fix. LOL.
Sent from my SGH-T959 using XDA App
Not to be too brash here...but who is looking at the back of the phone?
mine stays butt down 24/7 face up...so i dont see its back side....
lol
just my 2 bit's/bytes
and if u go to the t-mobile store they sell rubber covers for less than your last pizza meal...
RoxAbout said:
Not to be too brash here...but who is looking at the back of the phone?
mine stays butt down 24/7 face up...so i dont see its back side....
lol
just my 2 bit's/bytes
and if u go to the t-mobile store they sell rubber covers for less than your last pizza meal...
Click to expand...
Click to collapse
i just like having an amazingly impeccable phone to show off.ahaha.
well, are they cheaper than $3 including a coke? LOL.
shafiq265 said:
i just like having an amazingly impeccable phone to show off.ahaha.
well, are they cheaper than $3 including a coke? LOL.
Click to expand...
Click to collapse
use a mild abrasive like car polish then follow up with a wax if you want a sheen. this normally gets rid of decent scratches on the car from dirt racing so it should work on the back cover. rmr less is more. dont goop it on otherwise you will have a b***h of a time getting it off especially on such a small surface.
im scuffing mine up good in preparation for a paint job im tired of the faux carbon fibre look that just attracts finger prints too much.
you could also do what im doing and take some sand paper scuff it up then use a spray paint to cover it, then a clear coat on top to protect the paint. not sure how thats going to turn out yet tho.
You can buy new battery doors on eBay for like $5 bucks. You can get all different cool patterns and colors (I have a metallic silver one on now), or get the stock Galaxy S/Samsung backs (black and purple).
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
I doubt there will ever be one. Unless you can talk joey3002 into making some again, but I think he's done with the covers.
You should wait and see what the phone looks like in person.
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
dozybolox13 said:
Has anyone seen a replacement cover for that ugly glossy black part? I'd love to replace that with a better looking piece of plastic.
Click to expand...
Click to collapse
I agree 100%. I don't want to put a case on my EVO but definetly need to replace that ugly glossy black part. HTC should just have kept it matte black.
I'm going with an otterbox defender. I need a heavy duty case though. Have had an otterbox on my Eco 4 G since week two after it launched. Quality case.
I would pay $$$ to get one in CF..
Will
lacrossev said:
I was just gonna take it off and go at it with 800 or 1000 grit wet and take off the gloss
Sent from my cm_tenderloin using Tapatalk
Click to expand...
Click to collapse
I want to do the same, but it looks like the camera lens part of it is going to be a PITA. Hopefully there will be third party covers available that will match the bottom half of the back.
URABUS0924 said:
I want to do the same, but it looks like the camera lens part of it is going to be a PITA.
Click to expand...
Click to collapse
That's what painters tape is for. If that cover is cheap enough to replace (in the unlikely event that I screw it up), I'll be going this route.
shellguy said:
I would pay $$$ to get one in CF..
Will
Click to expand...
Click to collapse
If the reason why that piece of the phone is plastic is due to the antenna placement, then replacing it with a cf piece may cause some signal attenuation as CF works as RF shielding for some applications, as i've read from RC model airplane forums where people discuss when and where to use CF in their planes.
also, NFC does not work without that specific cover in place. There are antennas and whatnot built into the thing. watch Phil Nickinsons quick walkthrough video on android central to see what I mean. he said that nfc definitely doesnt work without the cover on.
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Varekai said:
How about some carbon fiber vinyl wrap? It's not actual carbon so it shouldn't block anything right?
http://www.amazon.com/Black-Metro-Flexible-Carbon-Fiber/dp/B005BTNFVQ
Click to expand...
Click to collapse
Eh the issue that you will have is making sure that it is cut correctly.
Will
thats what that xo skins cf-look skin looks like. 3m di-noc would work pretty well as its thin enough to wrap around some basic curvatures like the one we have for the back cover. I've seen it wrapped around some crazy shapes without additional relief cuts or anything so it would be a good place to start if you don't want to pay the 15 bucks for a few pieces of that material pre-cut for the phone.
I have 2 small rolls of the CF Di-Noc in both silver and black. Will upload pics as soon as I can get it laid down. Now to decided which color.
Sent from my Nexus S 4G using xda premium
I buffed my shine off with fine steel wool (grade 00) , then buffed it over a final time with ultra fine steel wool (grade 0000). It's available at any Home Depot. It leaves you with a slick matte finish, no gloss, no excessive fingerprints.
I removed my back cover to do this, but its not necessary. It's actually quite easy to remove, almost like a removable back cover. I just pushed my fingernail in and got a gap, then proceeded around the edges popping each clip as I went... Alternatively you could just put tape on your camera lense to avoid scratching it.
retrospooty said:
I buffed my shine off with fine steel wool (grade 00) , then buffed it over a final time with ultra fine steel wool (grade 0000). It's available at any Home Depot. It leaves you with a slick matte finish, no gloss, no excessive fingerprints.
I removed my back cover to do this, but its not necessary. It's actually quite easy to remove, almost like a removable back cover. I just pushed my fingernail in and got a gap, then proceeded around the edges popping each clip as I went... Alternatively you could just put tape on your camera lense to avoid scratching it.
Click to expand...
Click to collapse
Do you have any pictures of the finished product? I'm curious.
jonathan3579 said:
Do you have any pictures of the finished product? I'm curious.
Click to expand...
Click to collapse
I'd love to see pictures of this as well, I just put on a slim flexible case and looks much better.
Pics
pics! sounds sweet
Pics or it didn't happen
Sent from my LG-D800 using Tapatalk 4
Wouldn't doing this mess up the screen printed logos on the back cover?
Sent from my LG-D800 using xda premium
pics pics pics pics pics pics
Hope this isn't a tease.... POIDH.
jonathan3579 said:
Do you have any pictures of the finished product? I'm curious.
Click to expand...
Click to collapse
I will post pics in a while. At work with no other camera ATM.
Remove cover n take pic
Sent from my Wildfire S A510e using xda app-developers app
bgaccord said:
Remove cover n take pic
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Was gonna say the same.
Very interested to see the end results!
Sent from my LG-D800 using Tapatalk 4
Sorry, I have my old GS3, so not great pics. I set it at 640x480 to avoid too large files. They do show its lighter, a charcoal color now vs. the original black and you can see its now matte and not shiney. A few small scratches at there, that I still need to rub out with the ultra fine steel wool.
Set 2 - new account here and it wont let me post more than once every 5 mins.
If I had thought about it, I would have done this with my S3 over a year ago... HATE THE SHINE...
The big take here, other than you can smack the shine off with steel wool, is that the back cover is easily removable, so I would assume 3rd party replacements with real soft touch back covers are a real possibility. I hate to have a case, but a new back cover with soft touch plastic ala Nexus 7 (either rubbery like '12 or soft like '13) would make this phone perfect... Whoot!
That looks pretty nice. It even removed Verizon's crap.
20degrees said:
That looks pretty nice. It even removed Verizon's crap.
Click to expand...
Click to collapse
Yes, I shed a little tear for that... heheh . Too bad I cant steel wool the Verizon logo off the front without making it look like crap.
Looks great. only thing I am concerned for is the design under the gloss of the ATT version. I am pretty sure the rear panels differ between carrier. I just ordered the Spigen Slim Armor...if I don't like the case, I will give this a go.
retrospooty said:
If I had thought about it, I would have done this with my S3 over a year ago... HATE THE SHINE...
The big take here, other than you can smack the shine off with steel wool, is that the back cover is easily removable, so I would assume 3rd party replacements with real soft touch back covers are a real possibility. I hate to have a case, but a new back cover with soft touch plastic ala Nexus 7 (either rubbery like '12 or soft like '13) would make this phone perfect... Whoot!
Click to expand...
Click to collapse
Spray Plasti-dip....
Sent from my LG Optimus G using xda app-developers app
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.