One stop FAQ thread and Root guide..Noob Friendly ( all questions go here ) - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Noob Friendly Q & A & Stock ROM FAQs ​
I would like to give a big shout out to.. @Soryuu . He has added a great Stock ROM FAQs section to this thread. Please Thank Him, as he has covered a lot of questions I've seen asked by unrooted users..and without his support. This thread would not be moving ahead....
This thread is for all members and any questions you may have..... roms/kernels/recovery/root/bootloops/etc.
Please.... if you can answer a question, do it respectfully. No Flaming will be Tolerated...​
This thread is an attempt to clean up the Q & A section and in so doing...create an encyclopedia like thread for new members looking for answers to questions that have been asked and answered before.
I'm going to include a rooting guide soon as well as a how to for flashing roms.. Let's make this a Success..
Thanks...
I would like to Thank the following members for their Support
@Soryuu
@eushaun99
I would also like to Thank these members from the E4GT forum
@jdsingle76 ... For his support, guidance, and patience when I first joined XDA...
@micmars ... For making me laugh.. and his support as I learn...
@BluesRulez ... For making the thread in the E4GT forum that made me want to make this thread and all his contributions to that forum...
@ktempleton ... For his support when I made a SlimBean Q&A for his ROMs..( almost unneeded because they are so well built...:good:
@Stryke_the_Orc ... For his support and contributions in the E4GT forum. That makes me want to be more helpful...
@bilgerryan ... For his support and contributions in the E4GT forum. That shows me how much a single person can contribute...
And about ten others I can't remember...Thanks Everybody...​

Ok..So you have decided to root you're Galaxy Tab 10.1 (p-7510 Wi-Fi only)on ICS 4.0.4​
In this short guide. I will be explaining how to install a custom recovery and root you're p-7510 Wi-Fi only 10.1 tab on ICS 4.0.4
This is the method I personally used... But be aware... when doing such things..there is always a risk !!... I , nor XDA take any responsibility if your device becomes a shiny new coaster , explodes, or if your microwave runs away...
That being said... Let's get to it..
Ok.. first off. Watch this video by QBKing77 http://m.youtube.com/watch?v=jYeQ1ndwyM4&desktop_uri=/watch?v=jYeQ1ndwyM4
This is a great video to get familiar with Odin, as well as some useful tips from QBKing77.. Don't forget to Thank him... he makes great videos and has done a lot for the entire XDA Community.
After watching the video download this zip.. https://db.tt/8bEz54AY ... MD5=bdbadaae1044caa08d026a73d568f60e​
This zip contains the necessary files to root you're device ( Odin, cwm recovery, and root zip ). You will need to extract the files from the zip..... ( I use 7zip ) but any zip program will work.
I suggest making the folder on you're desktop as QBKing77 suggest. Also make sure you have atleast a 60 percent charge on you're device.
First, you will need Windows computer. If you don’t have one, borrow a Windows laptop from your friend or family member.
Second, make sure you’ve installed Galaxy Tab 10.1 Windows drivers. Here
Third,put your Galaxy Tab 10.1 into ODIN download mode by holding down both Power Button and Volume Down buttons. Right after the Samsung logo shows, you will see two menus, let go of both buttons immediately and then hit Volume Up button, you should be in ODIN download mode.
Now.. Go ahead and run the odin program you extracted into a folder earlier. After it comes up, plug in the device. Odin com box should turn color ( yellow, for me ). If it doesnt light up..check drivers and cable. Make sure re-partition is NOT checked Leave everything else alone.
Click the pda box and find the cwm recovery tar that was in the extracted package. Load it. Now click start.
Wait until odin gives a green pass in the com box and now you have a custom recovery.:good: The device should auto reboot. You can now unplug the device.
After your device boots. Plug it back in to your pc and move the root zip over to your tab. Put it in root of sdcard..Dont put it in a folder or sub folder.
Now hold power and volume down again until samsung logo and again let go. This time hit volume down to pick recovery, then volume up to select it.
Once you are in ClockworkMod Recovery, choose “install zip from sdcard” (using Volume buttons) and hit the Power button.
Next, choose “choose zip from sdcard” and hit the Power button.
Now find root zip and select it (power button)
Pick yes and it will flash/install.
After it finishes. Go back to first page..(go back is at the bottom of the page your on)
Now pick reboot. Congrats..you are rooted.
I mainly wanted to give anybody trying to root.. the necessary files ( as most links for these are old and dead )..That being said, this recovery is old also( but works great for this particular goal of rooting ). After you have rooted I suggest installing a newer recovery via zip or mobile odin ( I will also list the steps for this later, when my PC is back up ) I prefer TWRP recovery. ( I will explain more about this recovery as well )
Ok everybody... I thought I would take the time today to explain TWRP recovery ( Team Win Recovery Project ) a little bit..for the new users.
It is a touch based recovery. So no button pushing like CWM. Which in my opinion is nice. It is also completely themeable , for those like myself that must always have everything looking like they want.
For those using it or wanting to use it with a device that requires a modem. I have noticed that it doesn't flash modems overly well on my Epic 4G Touch. But I do not know how well it works on the tab 10.1. It could be such a thing as it works well...since our tabs have a seperate kernel/recovery partition.Unlike my Epic.
If new to this recovery. I suggest reading the recovery thread OP and also installing it through CWM recovery in it's zip form.
step 1.. Download the TWRP zip file and check the MD5...if available. This insures a good download.
step 2.. Now boot into CWM recovery and for good measure..wipe Cache and Dalvik cache ( dalvik cache is under advanced )
step 3.. Go to install zip from sdcard and select the TWRP zip and flash/install it.
After the flash is complete. Go to advanced and pick Reboot recovery...Thats it..Enjoy.
FYI.....Most up to date twrp is 2.7, you can find it in the development sections.
I take no credit for this method or the needed file. I just wanted to put them in one place and keep it up to date and active.
A newer version of Odin, if the one in the above zip doesn't work for you.I will attach it at the bottom of this post.
This is a link to chainfires blog..for supersu zip. If you dont know what this is for. Please search for an anwser before flashing anything.​

Because I'm big and need room to stretch... lol.

Bump...so maybe we can all see this and start using it..:good:

Stock rom FAQ!
The complete FAQ for stock roms!​
Before I start, I'd like to give a massive thank you to @Gil81, who let me create and maintain this section of his thread - give all your thanks to him as he was the one who started this idea in the first place to provide everyone with a One Stop thread.
Also to @eushaun99, who's helped a hell of a lot in this thread and provided some knowledge I didn't even know before, as well as providing help to users when both GIl and I couldn't.
UPDATE: Sorry guys, but I'm going away again until the 11th! Any queries I could answer, please leave a comment and I'll update this portion of the thread
This is meant to serve as a complete guide to the stock roms on the Galaxy Tab 10.1. @Gil81 has all the comprehensive guides to rooting and flashing custom roms you'll need.
So who is this section of the One Stop FAQ for?
Those new to the tablet
Those who want to stick to stock
Let me know if there are any other questions to do with stock roms and I'll try answer them as best as I can and add them to this post.
Before anything, the first thing to do is clarify which model device you have.
The Galaxy Tab 10.1 Wifi and 3G enabled variant has the device model P7500 and has the device code p4
The Galaxy Tab 10.1 Wifi only variant has the device model P7510 and the device code p4wifi
The Galaxy Tab 10.1v Stock android variant for Vodafone has the device model P7100 and the device code p3
The Galaxy Tab 10.1 for Verizon has the device model SCH-I905 and the device code p4vzw
This section of the FAQ will mostly cater for the P75x0 variants, as I have absolutely no experience with the 10.1v, nor the American variants (though if someone is willing to supply information about them, I'll add it to this thread)
So, once you've got your device model, read on
All about stock firmwares​
1.) Is there an official Jelly Bean upgrade for this tablet? Or will there be one?
Sadly, no. Samsung dropped Jelly Bean support for its first gen tablets (except the 7.7 and the Tab plus) some time back. However, earlier this year, Sammobile picked up on a rumour about the Tab 10.1 and a Jelly Bean build under testing. However, we've heard nothing since. Here's to hoping.
2.) Where can I get a stock rom from?
Right here. In the search box, type in either P7500 or P7510 depending on your model. You need to have an account in order to be able to access the download links.
3.) How can I update my tablet to ICS?
There are three ways.
One way is to use the Software Update option found in Settings -> About device. If you are able to upgrade and you aren't rooted, then this is one way. Better do it over wifi though because its a pretty hefty update.
Another way is to use Samsung Kies, the official PC program meant to be used in conjunction to Samsung devices. If you have Kies installed, just plug your Tab into your computer and if you have an update waiting, Kies will automatically tell you. Again, you can't be rooted for Kies to work properly.
The third way is doing it manually.
For the Wfi and 3G variant (model P7500, code p4): http://www.teamandroid.com/2012/07/...00-ics-xxlq8-android-404-official-firmware/2/
For the Wifi-only variant (model P7510, code p4wifi): http://androidlegend.com/update-samsung-galaxy-tab-10-1-wi-fi-p7510-with-ics-4-0-4-uelpl/
Please read the corresponding instructions VERY carefully! Messing up something with Odin can go horribly wrong. If you don't want to use those articles/feel unsafe about doing so, send me a PM and I'll walk you through it.
And any firmware, as long as its for your device, can be used- any stock rom can be used in these guides given above.
A nice video to demonstrate how Odin's used to flash the tablet (for both models) can be seen here.
Common issues on stock 4.0.4​
4.) I notice quite a lot of battery drain using my tablet on ICS. What's going on?
What's been discovered is that there are certain wakelocks in the kernel keeping the tablet awake, and stopping it from going into Deep Idle mode. These wakelocks also seem to be draining battery in the background by keeping the CPU awake (and apparently at max clock speed- 1Ghz- as well)...
There are a few fixes.
P7500 owners can look here for the best fix and an explanation as to what's going on.
P7510 owners sadly don't have the same fix, however, do read that link to see what's going on and try this as well and see if that improves anything.
5.) The Youtube app's really laggy. What's causing this?
http://en.wikipedia.org/wiki/Tegra
Yes, its the Tegra 2 processor inside our tablet. While good for games, sadly, its horrible at video playback. Its has trouble decoding HD videos from the web.
6.) How come my tablet can't play HD .avis or .mkvs easily?
Again, its a case of the Tegra 2 not being able to play high quality videos well enough for standard use. There is seemingly no fix for this, but the workaround is to install a third-market video player and run with it.
Stock applications​
7.) I don't use some of the apps preinstalled on the stock rom. How can I get rid of them?
Some pre-loaded applications are uninstallable by default. These include:
Swype
Polaris Office
Zinio (magazine client, in Reader's Hub)
Kobo (ebook reader, Reader's Hub)
Press Reader (newspaper reader, Reader's Hub)
Reader's Hub
Aurora2 (live wallpaper)
Blue Sea (live wallpaper)
Holo Spiral (live wallpaper)
If you want to uninstall any other apps that you don't use then you have to root first then use an app like Titanium or Root Explorer to delete them.
8.) I've accidentally deleted an apk that I desperately need back. What should I do?
This applies to the apps that are readily uninstallable listed above, although this may also apply to system apks.
Unfortunately, flashing a stock rom over your current one does not restore the apk. In fact, when you boot up you tablet, chances are nothing will have changed.
To fix this, you need to do a factory reset. Which means you'll need to do a backup of all your data and files and then wipe the tablet.
I'm not entirely sure why this happens so if someone could fill me in on this I'll add this into this section.
9.) The stock rom lags too much! What can I do?
Sadly, yeah, the stock rom does lag a lot.
For the best answer to this question, well, take a look at Gil's guide above and there you'll find all manner of roms for Jelly Bean that will/should make things a whole lot smoother.
Having root on stock will allow you to:
Delete unneccesary system apps that are running in the background
Overclock the CPU by flashing a new kernel
Add other compatible tweaks and scripts to optimise the system.
USB connections​
10.) I've plugged in my tablet to my PC and I can see a red X on the battery icon. What does this mean?
Don't panic - this is meant to happen. USB charging on the tablet's been disabled due to the slow speed. It doesn't mean you have a connection problem or anything.
11.) After upgrading to official ICS, my USB connections don't work! What next?
Take a look at this thread for one solution to this problem, as discovered by @KrimsonFL (and give thanks to him) - if any other fixes arise I'll post them here.
This post will constantly be updated with any questions I see in the Q&A forum that I think will be useful to all users. So stay tuned as this list grows

Soryuu said:
I like this idea... Would a stock rom FAQ help as well?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
I can't see how it would hurt...right.
If you want,since this thread is still on the first page...add some useful FAQs that you think members need to know and I'll give credit to you in the op...as well as point it out to members seeing this thread for the first time.
I'm in the e4gt forum all the time..and I can not even begin to tell you the success of this kind of thread over there. It really is a great resource..
Thanks for helping..

naveed70 said:
Here is problem this message always showing on screen , tab is working fine if i change other launcher other than default this message disappear,
I already flashed this with odin this problem still there,
Click to expand...
Click to collapse
OK...I need some more info. What device do you have..p4wifi,p4,etc... Also what you flashed with Odin and how...what is you're current set up..
Let me know and I'll try to get ya sorted out..
I moved this thread because I'm trying to start a Q&A thread for all questions...Since members aren't using it...I've decided not to post anywhere but here. Sorry if this is an inconvenience... But this kind of thread should be stickied in every forum and I'm going to make it work here...if it kills me..Lol.

Gil81 said:
I can't see how it would hurt...right.
If you want,since this thread is still on the first page...add some useful FAQs that you think members need to know and I'll give credit to you in the op...as well as point it out to members seeing this thread for the first time.
I'm in the e4gt forum all the time..and I can not even begin to tell you the success of this kind of thread over there. It really is a great resource..
Thanks for helping..
Click to expand...
Click to collapse
Mate, something like this is needed in the Galaxy S forum
I'll see what things I can compile/collate about the stock roms (probably not so many things to do with root as I haven't gone to that with my tablet) and update this post/make a new one later... Will take me time though.
Sent from my GT-P7510 using Tapatalk HD

I've moved the Stock ROM FAQ up to the fifth post, so now its easier to see!

Great work @Gil81 and @Soryuu. Unfortunately I don't think this will do much help as not many people come here and those who ask questions don't really search. But I think you should get a mod to get this stickied so that everyone can see this easier.
And @Soryuu, you should probably use that fifth post of yours as the stock ROM FAQ or get a mod to push your post up to the third post.
I've subscribed to this thread and I'll help as much as I can to get this thing up and running. If there's any help just ask me and I'll try my best.
Sent from my GT-P7500 using Tapatalk HD

eushaun99 said:
Great work @Gil81 and @Soryuu. Unfortunately I don't think this will do much help as not many people come here and those who ask questions don't really search. But I think you should get a mod to get this stickied so that everyone can see this easier.
And @Soryuu, you should probably use that fifth post of yours as the stock ROM FAQ or get a mod to push your post up to the third post.
I've subscribed to this thread and I'll help as much as I can to get this thing up and running. If there's any help just ask me and I'll try my best.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Thanks...I know I'm late to the game getting this started..but I also think it can be a great help to members...Especially with such knowledgeable members, such as you and @Soryuu , helping out..Thanks again.

eushaun99 said:
Great work @Gil81 and @Soryuu. Unfortunately I don't think this will do much help as not many people come here and those who ask questions don't really search. But I think you should get a mod to get this stickied so that everyone can see this easier.
And @Soryuu, you should probably use that fifth post of yours as the stock ROM FAQ or get a mod to push your post up to the third post.
I've subscribed to this thread and I'll help as much as I can to get this thing up and running. If there's any help just ask me and I'll try my best.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Thanks mate but this was all Gil's idea, I only offered to pitch in what I know
I'll probably get a mod to bump the post up, if not I'll just do some post rearranging
Sent from my GT-P7510 using Tapatalk HD

Soryuu said:
Thanks mate but this was all Gil's idea, I only offered to pitch in what I know
I'll probably get a mod to bump the post up, if not I'll just do some post rearranging
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
I might have started it..but I got the idea from the e4gt forum. And don't cut yourself short. You have already made a great contribution and I see more to come...Thanks. FYI..I sent a pm to one of the mods to try and get you're post moved to post 3 and get the thread stickied..

Gil81 said:
OK...I need some more info. What device do you have..p4wifi,p4,etc... Also what you flashed with Odin and how...what is you're current set up..
Let me know and I'll try to get ya sorted out..
I moved this thread because I'm trying to start a Q&A thread for all questions...Since members aren't using it...I've decided not to post anywhere but here. Sorry if this is an inconvenience... But this kind of thread should be stickied in every forum and I'm going to make it work here...if it kills me..Lol.
Click to expand...
Click to collapse
Brother its SHV-E230L this is wifi and 3g supported, i got this tab in that condition so i cannot tell you history how this error happen. But when i got this it was on 4.1.1 firmware, so i took latest firmware which is 4.1.2 and flashed with odin. Everything ok while flashing no error also.
But that message still showing on screen,
Error message picture i attach here,
According to my idea this message is due to partition currupted, because its showing only 9.3 gb,
But as there is no pit file available. So my preference is to remove message atleast if possible
Thanks

naveed70 said:
Brother its SHV-E230L this is wifi and 3g supported, i got this tab in that condition so i cannot tell you history how this error happen. But when i got this it was on 4.1.1 firmware, so i took latest firmware which is 4.1.2 and flashed with odin. Everything ok while flashing no error also.
But that message still showing on screen,
Error message picture i attach here,
According to my idea this message is due to partition currupted, because its showing only 9.3 gb,
But as there is no pit file available. So my preference is to remove message atleast if possible
Thanks
Click to expand...
Click to collapse
Have you tried wiping cache and dalvik cache in recovery...
If yes..I would back up the device to a PC...and wipe sdcard..that corruption of the partition also makes me think maybe something in the sdcard that is corrupt..

Gil81 said:
Have you tried wiping cache and dalvik cache in recovery...
If yes..I would back up the device to a PC...and wipe sdcard..that corruption of the partition also makes me think maybe something in the sdcard that is corrupt..
Click to expand...
Click to collapse
Yes brother i done that part,
Now the strange part is that after changing launcher not all few this error message disappear,
Launcher nova and apex showing this error message, but other launcher like launcher hd not showing this error message

naveed70 said:
Yes brother i done that part,
Now the strange part is that after changing launcher not all few this error message disappear,
Launcher nova and apex showing this error message, but other launcher like launcher hd not showing this error message
Click to expand...
Click to collapse
Hmmm...I'm stumped. Let me look around tonight and I'll get back with ya tomorrow..Sorry I couldn't be more help. But I'll keep looking.

Gil81 said:
Hmmm...I'm stumped. Let me look around tonight and I'll get back with ya tomorrow..Sorry I couldn't be more help. But I'll keep looking.
Click to expand...
Click to collapse
No problem brother take your time meanwhile i will try to wipe sd, as you told wben i go to sroage place device bit hang on that place , i will try to wipe that and i will let you know after thanks for helping me

naveed70 said:
No problem brother take your time meanwhile i will try to wipe sd, as you told wben i go to sroage place device bit hang on that place , i will try to wipe that and i will let you know after thanks for helping me
Click to expand...
Click to collapse
Alright...I'm tired...Lol.
I see that you're in the wrong forum...this also makes me wonder if you flash the correct firmware...If I was you. I would go to the correct forum and flash a ROM from there...10 to 1 that fixes you're issue..
If it doesn't...post in their q&a section. Somebody more familiar with you're device will more than likely have an answer.. But if nobody does..get back to me and I'll see what I can do..

Good Job
Well put-together Gil. Great idea, and I'm certain it will be well managed. Thanks also for the shout-out. You have become an invaluable asset to the E4GT community. Keep up the good work my friend.

Related

[Q] Ok... I pulled a bonehead play....

Well gang - I did it... I pulled a screwed up play on my BRAND new Galaxy S2 - I rooted it with a tool I found at http://galaxys2root.com - the phone is rooted with SuperUser access, but I'm unsuccessful at getting it into any kind of recovery mode.... THAT is when I learned I was using tools for the Galaxy S2 S9100 - NOT the SGH-I777 that I have.
The issue at hand is now that I realized my mistake, how do I proceed from here? I can't get the phone into any kind of recovery mode, and since I went the wrong way to start, I'm looking for the best advice... should I go backwards and make it stock to start from scratch, or can I proceed forward from here?
Thanks...
Your best bet is using odin go the main developer tread and look for unbrick odin from entrophy. Folow the directions there.
Sent from my GT-I9100 using xda premium
Well, the phone isn't bricked - I'm able to fully use it with no problems... I just don't know which way to go as far as recovery mode so I can flash ROMs/Kernels...
Midnight1970 said:
Well, the phone isn't bricked - I'm able to fully use it with no problems... I just don't know which way to go as far as recovery mode so I can flash ROMs/Kernels...
Click to expand...
Click to collapse
why would you use something from a website like that? not smart bro. just go to the dev forum and you'll find everything you need.
you'll have to use odin to flash a kernel with proper recovery.
task650 said:
why would you use something from a website like that? not smart bro. just go to the dev forum and you'll find everything you need.
you'll have to use odin to flash a kernel with proper recovery.
Click to expand...
Click to collapse
You're right - it was a moron thing to do.... hence, the title of the email - I fully realize I pulled a bonehead play.
Can you provide specifics though? I've looked around, and frankly, I'm a little overwhelmed and unsure of what my next move should be. I downloaded odin, and don't quite know what to do with it yet... Just looking for a little specific help... I had great success with my HTC Inspire, so I'm not really newb, but I'm dealing with a new device and of course I'm ignorant and unashamed to ask for help.
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1313659
That will return your phone to stock. Then you can start over. The sticky in this section has links to a lot guides.
Sent from my Galaxy S II (i777)
Midnight1970 said:
Well gang - I did it... I pulled a screwed up play on my BRAND new Galaxy S2 - I rooted it with a tool I found at http://galaxys2root.com - the phone is rooted with SuperUser access, but I'm unsuccessful at getting it into any kind of recovery mode.... THAT is when I learned I was using tools for the Galaxy S2 S9100 - NOT the SGH-I777 that I have.
The issue at hand is now that I realized my mistake, how do I proceed from here? I can't get the phone into any kind of recovery mode, and since I went the wrong way to start, I'm looking for the best advice... should I go backwards and make it stock to start from scratch, or can I proceed forward from here?
Thanks...
Click to expand...
Click to collapse
I did the same thing less than a month ago (only I used his AT&T version.) I'm guessing your wifi doesn't work, correct?
To fix my problem I utilized the info posted by creepyncrawly here: http://forum.xda-developers.com/showpost.php?p=18576627&postcount=1
I chose 2c to fix the phone, which had to be followed by booting into e3 and doing a factory data reset to get rid of the wifi issues.
To install clockworks mod and gain recovery options again I used the same thread by creepyncrawly and chose option 3c, which I used with Entropy's Daily Driver (currently running the latest version with no issues!) You can find that here. http://forum.xda-developers.com/showpost.php?p=18129028&postcount=1
I'm now free to make my nandroid backups and flash custom roms to play with at will, hope their work helps you too!
Thanks a MILLION gang - going to work on this probably in the morning, I'm kinda fried from looking at the screen and banging my head against the desk most of the night.... my wifi is actually working fine - the phone works totally fine with SU access, I just want the ability to go to that next step.

[GUIDE](EASY)Locked Jelly Bean to Custom Rom

Alright so there are a few users who are locked on Jelly Bean and are wanting to take the dive of unlocking and installing a custom rom. So I figured I'd put together this little guide to hopefully help y'all out.
I am not responsible for any damage you do to your device. Following this is your choice.This will void your Asus warranty and you assume all responsibility from here on out.
As long as you follow all directions in this guide your device will not be bricked. It will be unleashed to this beast of a tablets max power
Before you continue make sure you:
1. Have the drivers for your device installed on your computer
2. Have made the upgrade to Jelly Bean
3. Have the USB cable for your Prime
4. Have nerves of steel and the ability to read all and follow instructions in this guide.
Useful Information for total beginners: Some people using this guide may not even entirely understand what they are undertaking. This is not acceptable so it's time for some education. Android is a Linux based operating system (in it's self, not direly important information but it's nice background knowledge) which means that there are certain permissions to users. Having "root" permission is like being an "Administrator" on Windows systems. All devices come without "root" permissions as the total new users can do irreparable damage to their device. This is different than unlocking your boot loader. Unlocking your boot loader (in the Transformer Prime's case) is the act of saying to Asus "I willingly give up my devices warranty in exchange for the ability to totally control my device so I can flash custom software". Unlocking does not automatically give a device root permissions. This can only be obtained through an exploit or by flashing the proper thing after unlocking. Since I'm not perfect at wording (and it's best to educate yourself as much as possible on the subject) there is more info here:
http://www.androidpolice.com/2010/0...top-5-benefits-of-rooting-your-android-phone/
http://www.droidforums.net/forum/ga...53-explain-unlocking-boot-loader-rooting.html
Step 1 Download the Unlock tool here: http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download (navigate to Downloads, then select the OS as Android, then scroll to utilities and expand the menu. Find the unlock tool and download that. Don't worry about the "For ICS only" disclaimer. This has been confirmed working on Jelly Bean). Install this app on your Prime and run it. Connect to a network before doing so and follow all on-screen directions.
Step 2. By this point the unlock tool has done it's job and when you boot your Prime now has a nice "Your device is unlocked" message in the upper left corner of the screen. The next step is to flash a custom recovery image (TeamWin Recovery Project(TWRP) in this guides case). This may sound complicated but there are multiple easy ways to do this.
Option 1: Go to the TeamWin website and download the needed files as directed on the page and follow the instructions on the website to flash TWRP. (http://teamw.in/project/twrp2/93)
Option 2 (easy option): This option flashes TWRP running a file from your Windows computer. The file attached at the bottom of this guide needs to be downloaded and unzipped to your desktop. Once this is done you power of your Prime and turn it back on while holding the volume down button. Once the tab vibrates release the power button but continue to hold the volume down button.
Once this has been done you will see 4 icons pop up. One is the USB symbol. Navigate to that by pressing the Volume Down button until the icon is highlighted and press volume up to select it (the menu will say use Volume Up to navigate but this is incorrect). This will put your device into fastboot mode. Connect your Prime to your computer via the USB cable and open the folder you extracted earlier. Run the Windows Batch File. This will automatically flash the TeamWin Recovery image for the Jelly Bean bootloader.
Now that you have unlocked and have a custom recovery installed you can begin the flashing. To get into your recovery all you do is power up while holding volume down and select the RCK icon. This boots the recovery image and you'll be able to flash, back up, and restore roms. All threads will have a guide on how to flash the rom in the thread so I won't go into detail. I do suggest however, using a microSDcard to store downloaded roms for flashing as it is safer than internal storage. If you are looking to back up your apps then there's this amazing app called Titanium Backup on the Android Market. It's very powerful and can backup your apps as well as user data.
HELP! Something went wrong and I need help: As with all processes there can be issues that arise. Some are common and others are individual. Let's address some common problems for all you who are still nervous about this:
1. Everything seemed to go fine but my Prime won't boot into TWRP
SOLUTION: This problem comes up for a few reasons and is pretty common. A lot of time it's simply a bad download or you have the wrong files. Check the files you have and make sure they are the right ones. If so then download them again. Sometimes a download just gets corrupted. If neither of these solutions worked either try another method of installing TWRP outlined on their website or post here and either I or another helpful person will do everything possible to help
2. When I tried to flash a custom ROM it won't boot:
SOLUTION: Usually this is an issue specific to the ROM you are flashing. The basic list of problems to eliminate are:
1.Ensure you have a good download
2.Ensure you have the proper boot loader for the ROM (i.e. JB boot loader for Jelly Bean ROMs
3. Try reflashing the rom. Sometimes something just doesn't work and the only way to fix it is to reflash​
Vocab guide for totally new users:
Rom(s): Basically the operating system of your device.
TWRP: Team Win Recovery Project. Started by developers here at XDA and is a powerful recovery tool.
Brick/bricked device: Developer term for saying your device will no longer work due to software/roms and is basically a very, very expensive brick/paper weight.
FAQ: Q: My device is on Jelly Bean but the unlock tool will not work for me no matter what I do. What's wrong?
A: Asus has some issues as a company and certain people are completely unable to unlock their device no matter what. I suggest contacting Asus with your devices S/N and politely ask for an explanation and see if the issue can be resolved. Many users who have used the Asus RMA have still been unable to unlock afterwards.
Other useful links: http://www.youtube.com/watch?v=-pW05Jf87dg&list=UU7YzoWkkb6woYwCnbWLn3ZA&index=22&feature=plcp
Very comprehensive video guide with a full walkthrough to help all with this process. And of course all users can PM me with questions or ask them here.
SuperSU.zip attached is for those who want to root the stock rom. Any custom rom should already be rooted for you.
Good tutorial ..On your way to becoming a recognized contributer
Sent from my LG-P509 using Tapatalk 2
Unfortunately the unlocking tool doesn't work on my TFP, which currently is fully stock 10.4.2.17 and connected to network through wifi.
Tried rebooting, cold booting, waiting, cursing. Might try smashing it against a wall next.
Strange because I've read about many people confirming the tool working on JB. But no luck for me I guess.
DaLongTjeu said:
Unfortunately the unlocking tool doesn't work on my TFP, which currently is fully stock 10.4.2.17 and connected to network through wifi.
Tried rebooting, cold booting, waiting, cursing. Might try smashing it against a wall next.
Strange because I've read about many people confirming the tool working on JB. But no luck for me I guess.
Click to expand...
Click to collapse
The unlock tool doesn't work for about half the people on this forum. There is a separate thread about the whole unlock tool issue. Its useless. Asus refuses to do anything about it. They suggested RMA for some people to fix the unlock issue but when the tablet was returned, it was still locked. Take a look at the thread.
applesuckz said:
The unlock tool doesn't work for about half the people on this forum. There is a separate thread about the whole unlock tool issue. Its useless. Asus refuses to do anything about it. They suggested RMA for some people to fix the unlock issue but when the tablet was returned, it was still locked. Take a look at the thread.
Click to expand...
Click to collapse
I know. There are several threads concerning the unlock tool. My TFP went RMA 2 times, I was unable to unlock after both RMA's. I had root in ICS, but completely lost it after the JB OTA. I was hoping the recent OTA update would change something about the unlocking problems everyone's having, but for me it didn't change a thing.
The OP would be wise not to state that "Don't worry about the "For ICS only" disclaimer. This has been confirmed working on Jelly Bean". For it has be confirmed working on JB by a few user; many of us are unable to unlock even after the latest OTA.
Nothing works for me: reboot, cold boot, factory reset.
I desperately want to installl a custom rom on my TFP to see if that unleashes it's full potential. Right now I own a HTC One X+, which has the same cpu as the TFP but it's many times faster, smoother and less annoying. I still believe the TFP has the potential to be what it was intended to be, but ASUS software isn't going to do that for us.
DaLongTjeu said:
I know. There are several threads concerning the unlock tool. My TFP went RMA 2 times, I was unable to unlock after both RMA's. I had root in ICS, but completely lost it after the JB OTA. I was hoping the recent OTA update would change something about the unlocking problems everyone's having, but for me it didn't change a thing.
The OP would be wise not to state that "Don't worry about the "For ICS only" disclaimer. This has been confirmed working on Jelly Bean". For it has be confirmed working on JB by a few user; many of us are unable to unlock even after the latest OTA.
Nothing works for me: reboot, cold boot, factory reset.
I desperately want to installl a custom rom on my TFP to see if that unleashes it's full potential. Right now I own a HTC One X+, which has the same cpu as the TFP but it's many times faster, smoother and less annoying. I still believe the TFP has the potential to be what it was intended to be, but ASUS software isn't going to do that for us.
Click to expand...
Click to collapse
The issue is not Jelly Bean. The issue is sometimes the servers Asus uses to cross check your serial numbers loses some peoples S/N's. Without a registered S/N the unlock tool will not work. This is the fault of Asus and has been discussed many times. Developers have even decompiled the unlock tool and tried to reverse engineer it to solve this issue to no avail. Please, feel free to do some research if you doubt my answers. Many have spent hours doing so to only find out what they've been told.
McJesus15 said:
The issue is not Jelly Bean. The issue is sometimes the servers Asus uses to cross check your serial numbers loses some peoples S/N's. Without a registered S/N the unlock tool will not work. This is the fault of Asus and has been discussed many times. Developers have even decompiled the unlock tool and tried to reverse engineer it to solve this issue to no avail. Please, feel free to do some research if you doubt my answers. Many have spent hours doing so to only find out what they've been told.
Click to expand...
Click to collapse
I don't doubt your answer, I had never heard about any server-related issues though. Lots of people reported that their Prime's somehow had forgotten their serial numbers, but mine still has it's serial number. Also I registered my S/N online and it's still there, but I don't think that's related in any way. I RMA'd twice, I'm able to get OTA fm updates (possibly a clue that there are no server-side issues with my S/N), but now I'm unable to unlock.
Your guide is great and I really hope it helps many users unlock their Primes so they can get rid of the stock rom and flash a proper one onto their devices. You might want to insert a note though, that even though the unlock tool has been confirmed to work on some JB-primes there's still a chance it won't work (whatever the reason is).
OK let's stop squabbling about semantics here. Fact of the matter is that whoever's able to unlock at this point is quite lucky. The rest of us will just have to wait until ASUS fixes the issues or some whizzkid with too much time on his hands does.
You are a Gem, this finally made the process so much clearer
Shizbazki said:
You are a Gem, this finally made the process so much clearer
Click to expand...
Click to collapse
Thank you feel free to hit the thanks button
Sent from my Zio using xda app-developers app
Hi. I did all the steps you mentioned. In flashing TWRP I chose the 2nd option and everything went great.
The problem appears when I want to go to my recovery (power up holding volume down and then RCK) I get the droid with exclamation mark and nothing happens. Flashing recovery was succesful and I dont have an idea what could went wrong. I'm bit a new user of TF201 so would be grateful if You can help me
EDIT: Ah, I saw now that recovery is not flashing properly, saying sth like InvalidState.
EDIT 2: Ok I handled it myself, thanks again for the guide it was very useful!
Flashed Androwook this morning. Thanks for the painless guide.
Annoyed that nvflash isn't supported on Jelly Bean though. Now that I've flashed, can I get it?
GS_Dan said:
Flashed Androwook this morning. Thanks for the painless guide.
Annoyed that nvflash isn't supported on Jelly Bean though. Now that I've flashed, can I get it?
Click to expand...
Click to collapse
Nvflash is only available to users who did it while on ICS.
Sent from my Zio using xda app-developers app
McJesus15 said:
http://forum.xda-developers.com/showthread.php?t=1998359
Link to my guide thread in the general forum. If anybody has any questions you can PM me or comment there and it'll likely be answered quickly. I'll gladly guide anyone through this process if they need other information.
Click to expand...
Click to collapse
well, I'm unlocked and TWRPed, but what I would really like is root on my stock before flashing AW. So I can install and use TB for the apps...? (I'm on most current updated stock.)
BTW, your lil guide is stupendous. Stupid easy and took minutes. TYVM! I have only vaguely been following the TP forums, stock was fine enough for me, until recently. Was bored of flashing my phone and got the itch today to try something new with the TP. Did a backup, and ready to try some Wookie! Just that lil app issue, cause I'm lazy.
EDIT: correct me if I'm wrong, but after a bit of research (go figure!) it would appear that both Sparky and debugfs won't work on JB/most current stock? Tough sh** for me?
kingdazy said:
well, I'm unlocked and TWRPed, but what I would really like is root on my stock before flashing AW. So I can install and use TB for the apps...? (I'm on most current updated stock.)
BTW, your lil guide is stupendous. Stupid easy and took minutes. TYVM! I have only vaguely been following the TP forums, stock was fine enough for me, until recently. Was bored of flashing my phone and got the itch today to try something new with the TP. Did a backup, and ready to try some Wookie! Just that lil app issue, cause I'm lazy.
EDIT: correct me if I'm wrong, but after a bit of research (go figure!) it would appear that both Sparky and debugfs won't work on JB/most current stock? Tough sh** for me?
Click to expand...
Click to collapse
Once unlocked you can root with a flashable zip. Can't link to one but they're easy to find here on the TFP forum
Sent from my Zio using xda app-developers app
So this would be su.zip (or whatever it's called), and have the following structure?
su.zip
META-INF/
CERT.RSA
CERT.SF
MANIFEST.MF
COM/
GOOGLE/
ANDROID/
update-binary
updater-script
system/
app/
Superuser.apk
bin/
su
I just want to confirm if the file I found is correct or not. Does it need to be for a specific tablet/system? If it was just the app folder and the su binary I wouldn't ask, but the inclusion of metadata has me concerned as I can't seem to find one for the prime specifically.
EDIT: Yup, that's it. I stuck it on the internal storage, went into TWRP, choose "install", navigated to the zip, and it went without a hitch (installed the su binary and superuser app, effectively rooting the system).
Overall, this a good process for people that just want to root without all the hassle of replacing the whole OS.
the unlock tool failed to unlock on my tab... i think its because i did an RMA and asus changed the board inside the device..
GS_Dan said:
Flashed Androwook this morning. Thanks for the painless guide.
Annoyed that nvflash isn't supported on Jelly Bean though. Now that I've flashed, can I get it?
Click to expand...
Click to collapse
What do you think of androwook? Is much better than stock JB?
BashYaBro said:
the unlock tool failed to unlock on my tab... i think its because i did an RMA and asus changed the board inside the device..
Click to expand...
Click to collapse
Try contacting Asus.
sauliiin said:
What do you think of androwook? Is much better than stock JB?
Click to expand...
Click to collapse
Androwook 1.4 turns the prime into the tab it should be. Out scores stock by a lot on benchmarks
Sent from my Zio using xda app-developers app
sauliiin said:
What do you think of androwook? Is much better than stock JB?
Click to expand...
Click to collapse
Very fast, responsive. With the exception of the broken search (there is a fix), and a few other minor issues, I would not hesitate to flash it. Ver 1.5 is right around the corner with several things fixed, and apparently there will be a flashable update from 1.4.
mrwookie6379 said:
Just to give you guys a heads up I will be releasing v1.5 fairly soon to take advantage of the new update that is out but before anyone groans about only having just flashed v1.4 I will release it as an update to those already on v1.4 but also as a full ROM for those who want to skip v1.4 and go straight to v1.5.
Beta 1 for v1.5 was created this PM and is being uploaded for testing now so watch this space.
Click to expand...
Click to collapse
Awesome.
kingdazy said:
Very fast, responsive. With the exception of the broken search (there is a fix), and a few other minor issues, I would not hesitate to flash it. Ver 1.5 is right around the corner with several things fixed, and apparently there will be a flashable update from 1.4.
Awesome.
Click to expand...
Click to collapse
I really ansious about flashing androwook... Just have to found some time!! Thinking about doing it this weekend!
Well.... So do you think really worths the upgrade to Androwwok? I saw that the search bug has a fix, but are there too many other bugs?
And, the performance, is really much better?
Thansk for the answer, friend.
regards

[FAQ] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE

Welcome to the Mega help thread.
SAMSUNG GALAXY MEGA HELP THREAD
Welcome to the Samsung Galaxy Mega Help thread. This thread is dedicated to ALL VARIANTS of the device. The purpose of this thread is to gather all relevant information into one area, avoiding clutter of the Q&A section.
This thread is considered "noob friendly" with the following statement in consideration:
Before posting for assistance, you are asked to first read the Frequently Asked Questions (FAQ) below, and do Search of the forum using the XDA search feature. As far as I am concerned, there are no stupid questions. However, with this statement in mind, XDA is a development community that requires you attempt to search and find your answer before posting.
NO BEST ROM OR KERNEL QUESTIONS IN THIS THREAD.
Work in progress.
Thread Disclaimer
Can be found here: http://forum.xda-developers.com/showthread.php?p=43038401
Continued In Post #2
TUTORIALS
Q: How do I root and install custom recovery and/or 'root' on my device?
A: WORK IN PROGRESS
i9200: http://forum.xda-developers.com/showthread.php?p=53134891
i9205: http://forum.xda-developers.com/showthread.php?t=2588661
SCH-R960: Tutorial - Root for US Cellular Galaxy Mega
Q: How do I install ensure I don't "brick" my device?
A: First of all, read thoroughly and know what you are doing. There isn't ANY question that hasn't already been answered. After you have read up, do this: http://forum.xda-developers.com/showthread.php?p=49202103
Q: What is EFS, and why is it so important for me to back it up? How can I fix a broken EFS?
A:
Restoring EFS without a backup has been done successfully by @unclefab. See this post: http://forum.xda-developers.com/showthread.php?p=58021551
TROUBLESHOOTING
Q: where did all the CM and AOSP based ROMs for the i9200/i9205 go?
A: The device does still have development. Unfortunately, the main developer has chosen to leave XDA. If you do a google search, you will find it.
Q: I upgraded to a KitKat (4.4) stock ROM, and my device' screen is now non-responsive; what should I do?
A: marker
Q: I installed a custom recovery on my device via Odin, but root won't work or stick! What do I do?
A: Flash this in recovery: SuperSU v2.40
Q: My device is stuck in bootloop and/or on the Boot Screen; what should I do?
A: marker
Q: I keep running out of storage, even though I have erased everything - what can I do?
A: often things are lurking around, such as in LOST+FOUND. Install DiskUsage and determine where all the space is being used.
Q: My battery life sucks! How can I fix it?
A: you probably have a rogue apps causing wakelocks. You can try the app 'Greenify' and the xposed module called 'Amplify' to control them. Betterbatterstats is also a useful app to determine where the wake lock originates from. Also please see this help thread:
[Url="http://forum.xda-developers.com/showthread.php?t=1878828"[HELP CENTER] How to prevent § handle wakelocks § save battery life[GUIDE] [β][/URL]
...
Mega Accessories
For Galaxy Mega Indian current & future owners, we already have the accessories available
Just search for Stuffcool Galaxy mega ..sorry not allowed link posting yet..
Hello Guys,
I am from India too...Hyderabad..
Got the Mega 6.3 I9200 one week ago and successfully rooted it.
Installed most of the games and they work flawlessly. All apps working great.
Phone is great...My Kid loves it alot..............
Only thing is I have a problem with the USB Storage. When the phone is connected to the computer running Windows 8 32-bit version, I do get the option to transfer files using USB to PC but the disc drive does not show up in My Computer. Changed many settings but cannot transfer files to SD Card..I have tried all possible solutions in many forums especially XDA-Forums and Google.Com but nothing worked. The only way I was able to transfer files is by using the Mini USB to USB flash drive cable. See the image attatched. Please let me know if anyone is facing this issue and tried any solution that worked.. Thank you..
I love the phone...
How to Backup the Current ROM?
How to Backup the Current ROM?
Could someone help me in backing up the Current ROM? I9200 6.3 Mega India
I have rooted the phone and tried using the ROM Manager Premium 5.2.2.8 and others to back up but it needs the CWM to backup...
If someone has already backed up the ROM then could you provide the link to download....
Thanks..........
Pariki said:
How to Backup the Current ROM?
Could someone help me in backing up the Current ROM? I9200 6.3 Mega India
I have rooted the phone and tried using the ROM Manager Premium 5.2.2.8 and others to back up but it needs the CWM to backup...
If someone has already backed up the ROM then could you provide the link to download....
Thanks..........
Click to expand...
Click to collapse
Backup using Cwm buddy
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Hi Tha TechnoCrat,
Thanks for replying..I have tried the CWM but there is no option for Backup/Restore in the CWM.
I have tried the Experimental cwm touch recovery for galaxy mega 6.3 gt-i9200 India INU
download link:-
1.CWM RECOVERY- http://d-h.st/C8F
2.STOCK RECOVERY - http://d-h.st/My3
But no option to backup. I am sure there is no working CWM for this phone. I tried Stock, Custom and factory recoveries for this..
If you have a working CWM for this phone please post the link. Badly need it. Thanks very much in Advance...
Tried even the CWM NON-TOUCH RECOVERY: http://d-h.st/lgn from Shubhamchamaria's post. No option for backup/restore.
Pariki said:
Hi Tha TechnoCrat,
Thanks for replying..I have tried the CWM but there is no option for Backup/Restore in the CWM.
I have tried the Experimental cwm touch recovery for galaxy mega 6.3 gt-i9200 India INU
download link:-
1.CWM RECOVERY- http://d-h.st/C8F
2.STOCK RECOVERY - http://d-h.st/My3
But no option to backup. I am sure there is no working CWM for this phone. I tried Stock, Custom and factory recoveries for this..
If you have a working CWM for this phone please post the link. Badly need it. Thanks very much in Advance...
Tried even the CWM NON-TOUCH RECOVERY: http://d-h.st/lgn from Shubhamchamaria's post. No option for backup/restore.
Click to expand...
Click to collapse
Buddy it is impossible that there is no backup option in Cwm .There is a menu named Backup and restore . Else buddy use super backup application from play store and back up messages and apps
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Tha TechnoCrat said:
Buddy it is impossible that there is no backup option in Cwm .There is a menu named Backup and restore . Else buddy use super backup application from play store and back up messages and apps
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Click to expand...
Click to collapse
The real issue is that there is no working CWM for our devices. Therefore, the CWM files that are being created don't successfuly install CWM onto our devices. I have tried a few different CWM files that were created. I tried both the touch and non-touch versions of CWM for both the LTE (GT-i9205) and non-LTE(GT-i9200) versions of the Mega all with no success. Some of the CWM files cause you to have no recovery at all and you have to flash back the stock recovery. Then, some of the CWM files appears to have been installed successfully but, when you actually boot into recovery mode, the stock recovery is still there and not the CWM that you just "installed" (which is strange but this has happened to me more often than not).
That's probably what's happening here. Pariki probably got through the physical process of opening ODIN, selecting the CWM recovery file, starting the process, and letting it complete. Then, afterwards, probably booted into recovery thinking they are looking at CWM when in fact what they are seeing is the stock recovery because the CWM file didn't actually install onto their device. This would explain why they don't have a backup option. I don't know what the solution is beside the fact that we simply need a working CWM or TWRP. Currently, no one has been able to create one.
curgervending said:
The real issue is that there is no working CWM for our devices. Therefore, the CWM files that are being created don't successfuly install CWM onto our devices. I have tried a few different CWM files that were created. I tried both the touch and non-touch versions of CWM for both the LTE (GT-i9205) and non-LTE(GT-i9200) versions of the Mega all with no success. Some of the CWM files cause you to have no recovery at all and you have to flash back the stock recovery. Then, some of the CWM files appears to have been installed successfully but, when you actually boot into recovery mode, the stock recovery is still there and not the CWM that you just "installed" (which is strange but this has happened to me more often than not).
That's probably what's happening here. Pariki probably got through the physical process of opening ODIN, selecting the CWM recovery file, starting the process, and letting it complete. Then, afterwards, probably booted into recovery thinking they are looking at CWM when in fact what they are seeing is the stock recovery because the CWM file didn't actually install onto their device. This would explain why they don't have a backup option. I don't know what the solution is beside the fact that we simply need a working CWM or TWRP. Currently, no one has been able to create one.
Click to expand...
Click to collapse
======================================
Exactly.....Curgervending..
I have the same thoughts on this.
I can backup the normal Contacts and Messages but backing up the whole working ROM is what I want. It is only possible with a working CWM that has the Backup/Restore option. Need to wait till someone works on it.
If someone has a working CWM that has the Backup/Restore option, Please let me know with link. I will flash it.
Thank you.
there is no working cmw for Mega 6.3 at the moment.
baladev said:
there is no working cmw for Mega 6.3 at the moment.
Click to expand...
Click to collapse
============
SUCCESSSSSSSSSSSSSSSS.......
I flashed the CWM-based Recovery v6.0.3.2 (20130621) successfully...
http://goo.gl/sTbDl
by Alda.V
and I got the CWM working now. Thank you so much Alda.V for this....( I got the same 2 red lines after flashing
this, I tried to flash the stock kernel for this but it did not work. But that is fine, We have a working CWM
now..Thanks to Alda.V for this..)
Please read my success story.......
http://forum.xda-developers.com/showpost.php?p=43766694&postcount=25
Pariki said:
Please read my success story.......
Click to expand...
Click to collapse
your success story about what? screwing up your phone and restoring it? great, congratulations!
now, please stop spamming the forum with your success stories, the first two identical posts were enough.
a lot of people installed cwm on their phones and don't write their stories about it, thanks God!
baladev said:
your success story about what? screwing up your phone and restoring it? great, congratulations!
now, please stop spamming the forum with your success stories, the first two identical posts were enough.
a lot of people installed cwm on their phones and don't write their stories about it, thanks God!
Click to expand...
Click to collapse
==============================
HAHAHAHA..
Hope I helped you before you screwed your phone...I am sure I did..
You know the real pain is taking the phone to the Service Center. I am sure you faced this when there is nothing you can do and when there is no help from others after screwing it..
I was very descriptive with the way I restored my phone to make it working and without having to take it to the service center.
I am sure you don't know but this will help others on how to recover the phone, what to flash and what not to..If it is for their phone or not. They get ideas on recovering the phone..Hoped I helped others with my Post...
Whatever, dude. You assume too much. Just stop spamming here and posting the same message 4 times.
Easy guys.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
So..... bottom line is??????
Did he get a working CWM on the mega....?? Or not?
jimmbomb said:
So..... bottom line is??????
Did he get a working CWM on the mega....?? Or not?
Click to expand...
Click to collapse
He got it.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"

[Q] Help...!!! GT-N8000 internal SDcard not detected in ODIN

Hi Guys
This is my first attempt at Rooting my N8000. Kindly let me know if any more information is needed to help me out.
I'm currently on Stock 4.1.2 and I've never tried my hands on rooting, off late my device was lagging alot so i finally decided to go for the Root and make it faster.
My Cable & Drivers are perfect & up to date. The device ( int SDcard as well as the ext SDcard ) gets detected upon connecting to the computer.
However, when I connect the USB cable to the computer after entering into Recovery Download mode to use 'High on Android CWM' placed along with Android Revolution ROM on the root of my internal SDcard, the device fails to get detected.
ODIN detects the device on the respective COM port, i've tried by changing the port as well, but to no use. And, when I proceed and try to choose the PDA tab and select the internal SDcard. Device is missing.
The Tablet fails to get recognized at all. It does not even show up in Windows explorer.
I've searched a lot already but couldn't find any solutions. Any help would be appreciated.
Thanks in advance.
Raj
riturajgill said:
Hi Guys
This is my first attempt at Rooting my N8000. Kindly let me know if any more information is needed to help me out.
The Tablet fails to get recognized at all. It does not even show up in Windows explorer.
I've searched a lot already but couldn't find any solutions. Any help would be appreciated.
Thanks in advance.
Raj[/QUO
I think you need to read this post and follow the link in method 2 http://forum.xda-developers.com/showthread.php?t=1831152 ...Lots of info on rooting you're device..watch the video and I think you will see what you're doing wrong..Hope this helps..
Click to expand...
Click to collapse
Thanks a lot brother..... I was actually downloading the video walk through from the same post you referred when you replied here.
I'm getting the hang of things now.
Going to follow the process mentioned there and then take up the Android Revolution HD ROM.
My first attempt at rooting.... hope all goes well.... thanks again.:good:
riturajgill said:
Thanks a lot brother..... I was actually downloading the video walk through from the same post you referred when you replied here.
I'm getting the hang of things now.
Going to follow the process mentioned there and then take up the Android Revolution HD ROM.
My first attempt at rooting.... hope all goes well.... thanks again.:good:
Click to expand...
Click to collapse
No problem at all.. Being able to help people is why we're all here.. I seen you have been a member since 2011, but only have 3 posts.. Don't be afraid to jump in and ask questions and get involved in forum discussion's.. And here is you're first thanks..Good Luck.
Gil81 said:
No problem at all.. Being able to help people is why we're all here.. I seen you have been a member since 2011, but only have 3 posts.. Don't be afraid to jump in and ask questions and get involved in forum discussion's.. And here is you're first thanks..Good Luck.
Click to expand...
Click to collapse
Surely brother.
I joined xda long time when i had taken an S2 but had to change to Blackberry for official purposes, so could never follow Android Development.
Now that i've my N8000. I'm here to stay....
By the way, I just finished rooting my phone.
The trouble I was having in rooting since yesterday was because I was following the written directions in Android Revolution HD ROM.
I was trying to locate CWM's .tar file on my internal SD card. But it was not getting mounted since it was in Download mode. And i feared to brick my TAB by selecting the file from the Comp HDD. Watching the video solved that confusion in my head. Also, they didn't mention to untick Auto-boot in the video. First attempt, I didn't do it and Stock recovery replaced CWM. Next time, I unticked Auto-boot and manually booted into CWM recovery.
Anyway, All good now.....! time to taste real Android Power.
riturajgill said:
Surely brother.
I joined xda long time when i had taken an S2 but had to change to Blackberry for official purposes, so could never follow Android Development.
Now that i've my N8000. I'm here to stay....
By the way, I just finished rooting my phone.
The trouble I was having in rooting since yesterday was because I was following the written directions in Android Revolution HD ROM.
I was trying to locate CWM's .tar file on my internal SD card. But it was not getting mounted since it was in Download mode. And i feared to brick my TAB by selecting the file from the Comp HDD. Watching the video solved that confusion in my head. Also, they didn't mention to untick Auto-boot in the video. First attempt, I didn't do it and Stock recovery replaced CWM. Next time, I unticked Auto-boot and manually booted into CWM recovery.
Anyway, All good now.....! time to taste real Android Power.
Click to expand...
Click to collapse
Glad to hear it...now flash that thing like you stole it....lol

[SM-G360P] [ODIN] Official Samsung Firmware G360PVPU2APJ2

Hey guys I was able to take the time slooooowly download Stock firmware for our Prevail. Practically no support to this phone at all, but I've been working to change that as best I can. I am learning the ropes of ROM building and I have been able to make use of ASSSAYED Kitchen v.110 (Now upgraded to v1.20).
For those of you who don't know:
Odin tutorial
**DO AN ADVANCED WIPE IN TWRP BEFORE FLASHING. EVERYTHING EXCEPT THE EXTERNAL SD CARD**
Download Samsung USB Drivers (Go to this xda thread here).
Download Odin (Get it here) Extract to Desktop (Or wherever)
Download firmware to desktop (It's in .zip format and you can find it here). Extract .zip file to odin folder (again, or wherever). Extraction should yield G360PVPU2APJ2_G360PSPT2APJ2_G360PVPU2APJ2_HOME.tar
Right click Odin 3.10.6 and click on "run as administrator".
Click on AP and find the extracted ROM. Open it and it will take a minute to load in to Odin...Now make sure the 'Auto Reboot and F. reset time options are ticked and nothing else.
Make sure to be using a quality USB cord. Odin will recognize your phone being plugged in. It will say COM port number in the top left hand corner and added or removed will be in the log window. Once you are ready begin the flash press start.
Relax, It will take about 10 minutes to do it's thing. After the long agonizing initial boot process, you will be back to stock firmware PJ2 for SM-G360P
Hope it helps! So far there is no lollipop for our phone. Click here to check out all my uploads for this device. So far I have a TWRP port that actually works. (Must flash through Odin) an a Stock rooted deodexed busyboxed zipaligned rom of this firmware (Thanks to ASSAYYED Kitchen).
OLDER VERSIONS
OH1 Firmware
I flashed this back to my device in attempt to go stock but system status is still set to Custom just so everyone is aware. Not sure if it could be an error on my part.
just wanted to say thanks i have 2 of these phones 1 use for mp3 player/ play phone and the other my daughter has to use. ive tried a ton of twrps for this and everyone broke recovery. im dl ing the twrp and the rom you posted. ya there is no development on this phone at all. ive tried almost every rom i could to get it to lollipop with no luck. im going to try to get the theme store and the launcher swapped out with an updated version.. n5 s7 any is fine i just want to get it updated lol. ill play with it tonight and let you know how it goes. i appreciate the effort your putting in to this. i dont even have service to them i have a stubborn s7 that refuses to get rooted. i had no prob with the note7 but idk if i have some updated version of s7 but i cannot obtain full root. i need to have my audio mods at least. i have a good one with beats, dolby atomos and viper im going to try on the 360 as well. let me know if you would like the file. after i check if it works on this on that is.
Please stay tuned. Upgrading this thread to the most recent PJ2 firmware.
Thread updated to PJ2 firmware. I can confirm this will make your device status 'Official'.
Thank you!
I just wanted to say:
Thank you so much mate! An amazing job here, I had a broken rom on this device, and thanks to your PJ2 build; I now have a fully working device again!
Fixed the play store, play services, and all the ads and junk on this Textfree branded device (PE2 firmware confirmed). keep up the great work!
Thanks for posting this! I see your other files, would you mind going in more detail how to install the stock rooted deodexed version of this rom? How do you recommend unlocking the bootloader to install TWRP or can we just simply flash it with ODIN then install the stock rooted rom? Thanks!
EDIT: according to this forum looks like you just flash it. Do you recommend your 2.87 over the 3.02?
https://forum.xda-developers.com/ga...overy-teamwin-recovery-project-3-0-0-t3317381
EDIT 2: NVM found your other thread and looks like 2.87 is the way to go.
https://forum.xda-developers.com/ga...rom-stock-rooted-deodexed-zipaligned-t3464419
droiddude414 said:
Thanks for posting this! I see your other files, would you mind going in more detail how to install the stock rooted deodexed version of this rom? How do you recommend unlocking the bootloader to install TWRP or can we just simply flash it with ODIN then install the stock rooted rom? Thanks!
EDIT: according to this forum looks like you just flash it. Do you recommend your 2.87 over the 3.02?
https://forum.xda-developers.com/ga...overy-teamwin-recovery-project-3-0-0-t3317381
EDIT 2: NVM found your other thread and looks like 2.87 is the way to go.
https://forum.xda-developers.com/ga...rom-stock-rooted-deodexed-zipaligned-t3464419
Click to expand...
Click to collapse
Thanks! Just Odin it. Im running 2.8.7 and haven't tried any other versions lately. To install my custom rom, go here.
adrwill2000 said:
Thanks! Just Odin it. Im running 2.8.7 and haven't tried any other versions lately.
Click to expand...
Click to collapse
Awesome, thanks for keeping support alive for this phone!
I'd really like a custom rom for this phone i have to restart at least once a day or this ROM becomes unusably slow.. I mean atleast CM11
Hello. I'm Dave. I just got this phone (G360P Prevail LTE) and I'm pretty excited about it because it could sure use some stuff and I'm new to development and ROM porting. My goal is to bring great ROMs to the lower end phones that are sometimes forgotten in development. Right now I only have one good port under my belt, but it's a great one...PAC 5.1.1 for the ZTE Zmax Z970. Unfortunately, I used device and kernel trees that were already put together by another developer, so I'm not completely sure how to get started on putting trees together for this one. At least it's a Samsung, so mistakes will not be deadly, hopefully lol. There's a lot I don't know and this will be a hell of a learning experience. If anyone could fill me in on which devices that have some development going are most similar to this one, it would be a big help. I flashed the TWRP for the G360T1 before I found @adrwill2000's stuff since it has the same processor and specs and I'm sure you all know how that worked out...I guess I'll start by grabbing stuff for the device that our TWRP was ported from, unless you guys have any better suggestions. It would be best to start with trees from a very similar device. I almost hate to post this because it's very possible I will get nowhere, but I could sure use input from you guys that know this device well as to what my best starting point might be. Thank you.
I'm back to running H1 for now because it seems to be our latest that xposed is working on and imo this KitKat stuff sure needs some Gravitybox. Also, on mine, in J2, when I hit reboot it would reboot recovery. I was gonna fix it, but it's working in H1.
Scratch that...I found the Xposed updated for new 4.4s, so I'm on the deodexed, zipaligned j2 now. Thanks for all you've done with this, @adrwill2000...
It worked for me. My phone was bricked and I could not even get it to hard reset. Thank you!

Categories

Resources