I need to find a way to carry my phone around, especially at work. I work in a bus garage, my work is manual so I don't want the phone to be in any pocket as moving around can get annoying and I might hit my leg somewhere and damage the phone. But also in regular clothes, sometimes this phone is just to much for my jeans.
For me, finding the perfect way to carry this huge phone is the most challenging thing with it, but the size of this phone is my only negative point so I'll find a way around that.
From eBay:
1. Case cover with Holster with belt clip and kickstand:http://www.ebay.com/itm/SAMSUNG-GALAXY-NOTE-3-Case-Cover-Protector-Rigid-Slim-Holster-Kick-Stand-/171138781224?pt=US_Cell_Phone_PDA_Cases&hash=item27d8aa9028
2. Heavy Duty vertical belt clip pouch : http://www.ebay.com/itm/HEAVY-DUTY-VERTICAL-BELT-CLIP-POUCH-HOLSTER-CASE-FOR-SAMSUNG-GALAXY-NOTE-2-N7100-/360649119899
3. Another Holster Belt clip : http://www.ebay.com/itm/Samsung-Galaxy-Note-3-Rugged-Hybrid-case-cover-with-Belt-Clip-Holster-Bundle-/181230218883?pt=US_Cell_Phone_PDA_Cases&var=&hash=item2a3229ae83
So what are your opinons on these 3? Hows the china stuff with your experience? Should I be worried the belt clip break in half after 2days?
I've tried about 4 different china cases over the years....and 3/4 were garbage...the only decent one I had on my G2. The fit is usually too small/incorrect and i've cosmetically damaged phones in the past using them. Like the old saying goes "Ya get what you pay for." I'm by no means rich and like to save a buck when I can, but do you want to put your $600 baby in a $5-10 carriage?
1st one: I don't like that I don't see and rubber material in the case for shock absorption, just that little fuzzy "velvet" stuff. Bet it will scuff sides of phone too, had one similar before.... PASS
2nd one looks like the case for my leatherman. PASS
3rd one looks like a trident knockoff, but has the rubber/hard plastic combo that seems to work best. One thing I can't see is how big of a "lip' sticks out above screen. This is important for face-down falls. Without a good rubber lip like the Trident/otterbox cases, you WILL have damage.
Good luck and let us know how it turns out....
I've had mixed results with China cases over the years. I was suprised by the one I got for my Note 2. It was cheap, durable, and did exactly what I wanted. With my original Note I went through 2 or 3 cases before I got a good one.
delete
here is a s view knockoff from china
http://www.ebay.com/itm/Leather-Fli...DA_Cases&var=610212456597&hash=item485a9fd4cc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
delete
unlockingsky said:
here is a s view knockoff from china
http://www.ebay.com/itm/Leather-Fli...DA_Cases&var=610212456597&hash=item485a9fd4cc
Click to expand...
Click to collapse
Does the s-view work on this case?
delete
The one that i am using now was from my Note 2 and it's been a year and it's still just as good. It's fits perfectly even with a back case on my Note 2 and now a bumper case on my note 3. I'm using the brown colour.....you may want the black
http://www.ebay.com/itm/Samsung-Gal...t=US_Cell_Phone_PDA_Cases&hash=item3a7c0af646
wttisme said:
The majority of cases probably originate in China. I ordered #3 from your list and it should be here soon, so I can take pictures and let you know about the quality. From another auction, it shows that the lip that surrounds the screen is rather large, almost as much as an Otterbox Defender. I saw the same case on Amazon for $20, and there are a few sellers that have them less than $10 on eBay. I've also ordered a Spigen NeoHybrid because it offers the protection I need, but hopefully the corners won't pop off and crack the case near the charging port like my S4 case did.
Click to expand...
Click to collapse
Please, let me know how it turns out.
I'm also very interested to know how well the belt clip holds as well as the build quality of the material use for the belt clip itself, something always overlooked in product description and reviews.
delete
thanks for that, looks good enough for 10$, ill get one.
themohd said:
Does the s-view work on this case?
Click to expand...
Click to collapse
I have one coming in next week hopefully. If no one has done it, I'll post a quick review. I think people should hold if they can when buying this case from China. Let other experiment to see if it works correctly.
themohd said:
Does the s-view work on this case?
Click to expand...
Click to collapse
i doubt it because it seem to lack electronic piece to activate s view.
delete
unlockingsky said:
i doubt it because it seem to lack electronic piece to activate s view.
Click to expand...
Click to collapse
I ordered a knock off s-view for my S4 from alixpress and the s-view functions worked perfectly for me
Sent from my SGH-M919 using XDA Premium 4 mobile app
delete
Related
After trying several cases/pouches including the official C300 leather case (too bulky) and a cheapo faux leather pouch that marked the white casing of the phone I have finally found this:
http://cgi.ebay.co.uk/NEW-GENUINE-L...ches?hash=item3ca4b454a3&_trksid=p3286.c0.m14
Its a pretty tight fit but you can yank the tab to pull the phone out.
Dammit I spoke too soon. It stained the Hero orange!
I've ordered a gel/silicone case now.
footboydog said:
Dammit I spoke too soon. It stained the Hero orange!
I've ordered a gel/silicone case now.
Click to expand...
Click to collapse
Ouch, hope you can find something that you like!
I have been in search of a good case too, and I think I'm going to go with a foof pouch from Foof Shop. Another user of these forums got it and said it fits perfectly in an iPhone/iTouch size. Just a suggestion for you, if you like the style.
It's a shame my favorite company, Switcheasy, is staying Apple only
Waiting for beyzacases myself - their diamond one was superb.
I'm using a large Luna pouch by Krusell. Paid about £12 for it on a buy it now from ebay and would happily recommend.
It's a good quality soft leather case and while it wasn't purpose built for the hero, it is as you can see a pretty snug fit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can lightly hold case upside and gently shake without the hero falling out, but at the same time I don't need to wrestle the case to remove the phone. Only downside was the quality control sticker left a sticky mark on the leather when I peeled it off (which washed away with a little liquid soap).
Wish I had a black Hero. The white one gets marked without trying.
I might get my girlfriend to make me one of these:
http://www.instructables.com/id/Levis-Denim-iPodiPhone-Case/
Green Squircle said:
I'm using a large Luna pouch by Krusell.
Click to expand...
Click to collapse
thanks; would you please confirm whether you got the Large or the Extra Large Luna, please?
MF recommends the Extra Large, for the Hero, but you mentioned only the Large.
Looking at the sizes there's only a few mm in it; I really don't want another pouch that the phone falls out of though
thanks again...
Foof is Ideal
I recommended the foof case, and the more I read with problems with other cases the more I'm glad I use this one. The interior is white fleece absolutely no chance of staining and great protection for the device. I've still heard all my notification sounds through the case and the black and white patterned cloth looks great. Its also washable.
thanks; I love the foof cases: I was going to get one for my MBP, but my wife made me something very similar herself, just as good (or better .
Which foof case exactly did you get for the Hero? How snug a fit is it?
thanks again.
cdmackay said:
thanks; I love the foof cases: I was going to get one for my MBP, but my wife made me something very similar herself, just as good (or better .
Which foof case exactly did you get for the Hero? How snug a fit is it?
thanks again.
Click to expand...
Click to collapse
This is from a post that tallen3 made in another thread, but should answer your question:
tallen3 said:
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
Click to expand...
Click to collapse
cdmackay said:
thanks; would you please confirm whether you got the Large or the Extra Large Luna, please?
MF recommends the Extra Large, for the Hero, but you mentioned only the Large.
Looking at the sizes there's only a few mm in it; I really don't want another pouch that the phone falls out of though
thanks again...
Click to expand...
Click to collapse
Just a large...
Bought it from these guys:
http://cgi.ebay.co.uk/GENUINE-KRUSE...ches?hash=item5ad25ccf4a&_trksid=p3286.c0.m14
thank you both.
I got a "Golla" case from the Carphone Warhouse, it's a nicely padded thing, never had one before only £9.99 - bargain
I got one of these:
http://cgi.ebay.com.au/WHITE-Gel-Ru...Q5fMobilePhonesCasesPouchesQQsalenotsupported
It fits really well and is cheap as hell. It also makes it large enough (and increases the drag coefficient enough) so that it feels secure in my old G1 pouch.
This looks interesting to me. Since it will take Seidio forever to offer accessories. I need something to tide me over.
http://www.ebay.com/itm/BLACK-REAR-...651685?pt=PDA_Accessories&hash=item3f0ea544a5
I ordered one. I had gotten the krussell extra-large holster case, but it is waaaay too big, so I'll be shipping that back to amazon.
I'll post a followup. The only worrisome thing is from the pictures it might be cheap in that the backing is only one width and doesn't taper to the top edge of the phone.
Let me know how the holster is with that case
Sent from my SAMSUNG-SGH-I777 using XDA App
i believe those are PureGears. They made that same design for the iPhone. Insanely good price and didn't add a crazy bulk to the iPhone for having case+holster.
I saw seido holster from the galaxy captivate worked with the S2 though
I have a holster for my captivate from seidio. It doesn't fit, too small. I wonder if you were to get the one of the combo packs and not use the shell if it would fit though. I may order one just to check.
I went ahead and ordered the case from ebay also. I will review when it comes in.
ngocdao said:
i believe those are PureGears. They made that same design for the iPhone. Insanely good price and didn't add a crazy bulk to the iPhone for having case+holster.
I saw seido holster from the galaxy captivate worked with the S2 though
Click to expand...
Click to collapse
tycon said:
This looks interesting to me. Since it will take Seidio forever to offer accessories. I need something to tide me over.
http://www.ebay.com/itm/BLACK-REAR-...651685?pt=PDA_Accessories&hash=item3f0ea544a5
Click to expand...
Click to collapse
Thanks for the link. Just ordered one. I too like Seidio because of their case holster combo. This will do till it finally comes out.
Ok, the case came today and I like it a lot.
The clasp has a built in stand:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The clasp rotates 360 degrees:
and you can store the phone screen out or screen in:
Two problems with it:
1. The secondary mic is covered up. I plan on drilling a hole with the dremel to open it up.
2. Because of the top tab (see first image) you can only choose to have the USB available or the headphones available when it's in the holster, but not both. Again a small cut-out in the tab could make it not block the headphones, which I might do as well.
@othermark
if you have time can you post more pics or a vid. i would like to see how it looks like out of the holster or how it looks with the screen facing out. thanks in advance
edit: oh i forgot to mention. there are different colors too.
Front facing:
Volume side:
Power side:
Thanks. I wish they would sell just the holster, separately. It seems the tpu case i have right now would fit no problem
I just ordered one as well
Sent from my SAMSUNG-SGH-I777
Mine came in the other day. Its great. Only thing I don't like is its hard to slide in.and.out of the holster. Probably will break in.
Also it fits perfect in the infuse dock with the case on! !
Sent from my SAMSUNG-SGH-I777 Cognition
Yep, it took about 50-75 pulls before it started to easily slide in and out.
I just ordered mine too i figured if the case did cover the noise cancelation mic the current dearth rink case i have on it doesn't and it will probably fit in that holster. win win
othermark said:
and you can store the phone screen out or screen in:
Click to expand...
Click to collapse
When it is in the holster in the face-out position, is it stable? Can I go for a jog with it on my belt and not worry about it?
Also, has anyone tried this holster with any other case? And will it work face-out as well?
excxda said:
When it is in the holster in the face-out position, is it stable? Can I go for a jog with it on my belt and not worry about it?
Click to expand...
Click to collapse
It's very stable. The face-out position has more friction to it than the face-in position. Both positions don't budge when seated, but it will take more force to remove it from the face out position.
Ordering one now
I'm using the holster with The Agf case with the leather insert from the att store. I had to do a few easy mods to make it slide in easier but I'm diggin this combo.
The case that comes with the holster doesn't protect the phone as much as I'd like.
Sent from my SAMSUNG-SGH-I777 using xda premium
Well the case has done it's duty, it's got quite a few bumps and bruises and I managed to break the thin strip at the bottom of the case. So I ordered another one.
This looks like the same thing, just a few bucks cheaper.
http://www.amazon.com/gp/product/B006J4E6MO/ref=ox_sc_act_title_1?ie=UTF8&m=A30XRGG45X0IFD
Got mine in October. Just broke it last week. Liked it enough to order another one.
Sent from my SAMSUNG-SGH-I777 using xda premium
Here is another case I found during my search for unique, high-end cases for our phones. The company who makes it is AG Findings. They own Ballistic, so it's not some no-name company. It is a TPU case with a leather inlay on the back that adds some sturdiness and refinement to a standard TPU case. I actually ordered this case and it should be here Thursday. I'll post pictures when I get it.
Again everywhere I've looked says it fits I777...so we will see.
http://www.agfindings.com/products/samsung-galaxy-s-ii-magnate-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's a fine looking case right there. I'm getting a SGSII today hopefully if they come in stock so I'll also be in the market for a case.
I use this case, it's holding up well. AT&T actually carries this one in the store, which is where I purchased it.
kest874 said:
I use this case, it's holding up well. AT&T actually carries this one in the store, which is where I purchased it.
Click to expand...
Click to collapse
Didn't know that. What do they charge for it?
$30i believe...
Sent from my SGH-I777 using Tapatalk
I see it for $16 on Amazon w free shipping. I already have a couple of other cases, including the Casemate pop stand (white) and Incipio Featherlight case. While I liked the Pop up stand, it's a bit bulkier than I'd like. Any idea how this one compared to the Casemate pop up case? I like the look, guess I'll do some more research before pulling the trigger on this one.
dmm5157 said:
I see it for $16 on Amazon w free shipping. I already have a couple of other cases, including the Casemate pop stand (white) and Incipio Featherlight case. While I liked the Pop up stand, it's a bit bulkier than I'd like. Any idea how this one compared to the Casemate pop up case? I like the look, guess I'll do some more research before pulling the trigger on this one.
Click to expand...
Click to collapse
I think its about as slim as you can get while still having reasonable protection. Id say its definitely slimmer than the pop. Its a classic looking and understated case and feels great in the hand. I'll try and get some pics up tomorrow evening.
Any luck with taking some pictures?
Right! Sorry about that...here's the pics:
Nice! I dig that style.
I may have to pull the trigger on one.
dmm5157 said:
Nice! I dig that style.
I may have to pull the trigger on one.
Click to expand...
Click to collapse
Yeah it is nice. It fits pretty tight and feels good in the hand. The material is smooth to the touch and doesn't snag in pockets. I found it on Amazon for around $12 if I remember correctly. The hole at the top for the headphone jack may not work with some headsets. For example in my car my AUX cable has to be shoved into it with some force to get it plugged in, but once in it stays there. You could always use a hot nail to open the hole up a bit.
I'll probably bore it out with my Dremel
Got my case in today. So far, I'm really digging it. The buttons are a little tougher to press, but I'm getting used to it.
The case is a little tough to get on/off, at least at first. I do like that the case is VERY snug. The case has a good feel to it, although it could have a little more grip to go with the texture. It's also surprisingly light.
I also have a Case-mate Pop Case and an Incipio Feather Ultralight Case, so I decided to take pictures to compare all three.
The Incipio Feather case is by far the slimmest, next is the Magnate, then the Case-Mate case. I paid $25 for the Case-Mate, $21 for the Incipio, and $15 for the Magnate, although the Magnate said $35 on the box and arrived in the official AT&T store packaging.
While the Incipio case was the lightest, it also offered the least protection. I'd probably rate the Magnate case and Case-Mate the same as far as Protection goes. I couldn't be much happier with this case.
Hey All. Got my Amaze yesterday and its already up and running on the Energy ROM with faux kernal; thanks to those respective devs. With the flashing out of the way for now, time to look into some cases. As everyone is aware, amaze is not the lightest or thinnest phone, so a case with minimal weight would be desireable. I ran into a matte snap on case from ebay, wanted to know if anyone here has any feedback on these. I am not going after the price (I am open to spend whatever for the ideal case), but more so on the "thin" part. Sadly, I can't post the url due to my noob status, but its easily searchable under "Matte BLACK Hard Snap On Thin Back Case Cover For HTC T-Mobile Amaze 4G".
Looking forward to being part of the Amaze community!
I have a two piece black rubberized case on my one amaze, and a one piece hard case on the other one. Both are light, and fit pretty good. the two piece fits tighter, and has cutouts for all the mic holes on the back cover etc. and they all line up. its just a cheap ebay case. And both are thin. Any cheapie case you get on ebay will be light, and the best part is after a couple months just pay $3-5 and get a new one.
The one piece doesen't cover the top and bottom of the phone, just the sides, so it won't protect as well as the two piece, and if I ever have to pop the two piece apart to get at the back cover, it comes apart easy.
I'd get a cheap two piece, try it out. if you need more protection, then upgrade, but i'd start at ebay.
Be careful with some of the cheap ebay snap-on cases. I got one for a previous phone that was front and back pieces that snapped together. It was thin and looked OK but it would pop open when dropped and the phone would come out and land unprotected. It was ok for scratch protection and keeping the screen off the table but provided very little to zero drop protection.
Thanks for the info. Yeah I have to consider the drop protection. When I was searching youtube for cases, the videos were showing cases which was huge. Yes it protects the phone, but it’s very uncomfortable to carry around. Might have to try some on from the local mall kiosk if anything.
I just went with a cheap ebay case from eforcecity and I'm satisfied. I think I paid $6 shipped and it came with a screen protector.
I got one from ebay that is really good, it comes with a holster. Trust me, thiz isnt like the ones that are cheap made and snaps when minimal force aplied to it. This is high quality. Not bulky either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC_Amaze_4G using XDA App
I too have this case, it works great. I have not noticed any difference in my network connection signal strength which was a concern and has provided good protection for the phone in its couple of drops. I work in a hydraulics shop with hardened concrete floors and it has held up well. As a side note the case also holds up well when exposed to mineral and petroleum based hydraulic fluids.
Xcor3 said:
I got one from ebay that is really good, it comes with a holster. Trust me, thiz isnt like the ones that are cheap made and snaps when minimal force aplied to it. This is high quality. Not bulky either.
Sent from my HTC_Amaze_4G using XDA App
Click to expand...
Click to collapse
Anyone know what this case is called? I'm currently using Kraken, which I love. But this looks equally as sexy.
Cheshire.Love said:
Anyone know what this case is called? I'm currently using Kraken, which I love. But this looks equally as sexy.
Click to expand...
Click to collapse
Here you go
[ebay link removed]
I think that's the cheapest I've seen
Sent from my HTC_Amaze_4G using XDA
http://www.cellularoutfitter.com/p-...-note-sgh-i717-att-silicone-cover-black-.html
I'm looking for a cheap thin case that covers the corners and is also slightly raised above the screen, in case I drop it face first the screen will not touch the ground.
I am not even seeing a brand name for this case, but it's cheap, so thinking about getting it.
EvoXOhio said:
http://www.cellularoutfitter.com/p-...-note-sgh-i717-att-silicone-cover-black-.html
I'm looking for a cheap thin case that covers the corners and is also slightly raised above the screen, in case I drop it face first the screen will not touch the ground.
I am not even seeing a brand name for this case, but it's cheap, so thinking about getting it.
Click to expand...
Click to collapse
I have this one I think. Again with no brand name. But I can say that it is a perfectly adequate case for using it on your desk/table however it has a loose fit which when you try to put it in your pocket it wants to come off. Given the price I can't really complain.
thats why they are they have the word cheap in their name lol
$4.00 for the case $5.95 for first class shipping weird
georgios73 said:
I have this one I think. Again with no brand name. But I can say that it is a perfectly adequate case for using it on your desk/table however it has a loose fit which when you try to put it in your pocket it wants to come off. Given the price I can't really complain.
Click to expand...
Click to collapse
Thanks that helps. I don't want one that is going to try and come off. I found some other cheap ones on Amazon.
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Couple of questions on the Boxwave unit...
Any chance it will work with a cradle type charging unit? If so, which cradle is recommended?
I am looking at the Hyperion unit and it looks like it might actually work.
I cannot post links yet, but Amazon and "Hyperion galaxy note" should get the job done.
Next question is rather odd...I want to be able to set my phone in a cradle in landscape so the connector will not work (obviously). So is there a cradle that will allow the Boxwave unit to remain in place, AND hold the Note in landscape? I do not care about charging in this configuration, as I will just run a cable to my USB port on my PC or charger.
Thanks in advance
Mike
Dacian said:
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Click to expand...
Click to collapse
Co-sign...I bought this case and I was surprised at the quality. I'm waiting for an Otterbox or something similar, but this case is a perfect fit for the Note and it looks very nice.
I'm not sure about docking capabilities, but it's very easy to take on and off.
I got this one.....
http://www.ebay.com/itm/220949906490?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Fit very well and took about a week.
Rob
I definitely suggest TPU cases. You can get them every bit as cheap, provide similar protection, and will slide in and out of your pocket when you want it to, and will stay there when you don't. Also, due to the snug fit, I have found they allow much less dirt to get inside the case compared to silicone cases, stuf keeping your device scratch free.
I remember that I had a silicone case for my first iPod, a 30gb video, and I was highly disappointed when dust and dirt had scratched the back of my device. Silicone cases don't do much except make your phone grippy. they may defend well against drops, but TPU is just as good and doesn't allow your device to get nearly as dirty/scratched.
Ignore this post.
Dacian said:
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Click to expand...
Click to collapse
I just bought this one too, thanks!
EvoXOhio said:
I just bought this one too, thanks!
Click to expand...
Click to collapse
I too bought a BoxWave Case....here are some pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just Ordered the Blackout case from Boxwave, looks like it will suffice for now.
Is it thinner than a speck case? I got the Spigen Spg that I like very much but it doesn't protect the front I want a lightweight case.