I have made this tutorial due to me not finding any other tutorials on fixing the problem presented in this guide. Dear admins if there is another guide on how to fix this problem please feel free to do what you must to this thread. Thank You
First of all is if you have the security error problem on your phone I can assure you that it is NOT bricked and can be fixed.
Also I am not and will not be accountable if this guide does not fix your phone. I also will not and should not be held accountable if this guide is to further damage anything of your phone.
PROCEED WITH CAUTION; Please Pre-Read this guide and understand it before proceeding.
Okay so I will guide you through on how to fix the security error problem most people have on their LG devices. I had encountered this problem on my friends LG MS769 (Optimus L9 – MetroPCS). This guide should work for mostly any LG phone.
This happened to me when I was flashing a custom recovery for the phone. I had successfully rooted the phone using a guide located at:
androidforums.com/optimus-l9-all-things-root/759935-how-root-metropcs-l9-lgms769.html
By following the above guide you will be able to successfully root and install SuperSU on you LG MS769. But keep in mind that even though it will root the phone is will NOT, I don’t know how to emphasis this as much, it will NOT: Unlock the BootLoader, Flash a custom recovery, or let you install a Custom Rom.
But let us come back the topic at hand. Okay so to fix this problem we will need the following.
LG Mobile Support Tool -- B2CAppSetup.exe -- Attached
A reliable Internet Connection
A computer with Windows XP/Vista/7/8 – (Untested on Windows 8)
TIME and PATIENCE --- We will be downloading a file about 500MB give or take some.
Okay let us begin in our endeavors of fixing our problems.
First use the below download link to download the LG Mobile Support Tool
After downloading that place it on your desktop and run it as administrator
After you run B2CAppSetup.exe it should automatically open the Mobile Support Tool, if not there should be a new .exe created on the desktop called LGMobile Support Tool just double click and open that.
Let the program update and install any necessary files that it requires. (It should automatically start to update and install, it should just prompt you with a UAC window)
Once you see the program open, click on the Install USB Driver button on the top left-hand side
Then a new window will come up asking for you for the phones carrier and the phones model number.
Once you are successfully done installing the drivers, we can proceed to the restoration process of the phone
Okay now we need to put the phone in S/W Upgrade Mode.
a.Remove phone battery, if it does not have a removable battery make sure phone is off
b.While holding down the VOLUME (DOWN or UP or BOTH) BUTTON(S) insert the microUsb in the phone while also having the USB side connected to the computer already. (To enter S/W mode it varies phone to phone which volume buttons must be pressed, try all three options)
Once the phone is in S/W Upgrade Mode the computer will start to install the drivers and the LG Mobile Support Tool will automatically detect it and start the restore process
a.Keep in mind that this process takes its time and should more than likely complete successfully giving you a working phone
b.NOTE: I have read some people calming that the process gets stuck at 4% and does not go on. If it does happen to get stuck at any percentage let it stay there for a while and see if it does go on, if not I would recommend retrying once on the same computer and if it still does not work I would give a second recommendation to try on another computer. Other than that I would suggest you contact you phone carrier or LG.
If all goes well you should have a fully functioning factory restored LG phone. Congratulations!!!!
Hope this guide was of help and I wish you best of luck in your further endeavors. :good:
punjabi4life said:
...
Click to expand...
Click to collapse
Thanks for the information but to enter S/W update mode I think after remove battery your should hold VOL+ then connect usb cable, not VOL-. Plesae update this, I'll link it in my signature:good:
Thanks I looked this up and fixed the instructions above :thumbup:
Sent from my Nexus 4 using xda app-developers app
LG Optimus F160L
Have you tried this method on LG Optimus F160L. I also stuck on this mobile.
Check my thread
http://forum.xda-developers.com/showthread.php?p=46564691#post46564691
No I have not. But more than likely my method to restore should fix it
Sent from my Nexus 4 using xda app-developers app
Security Error corrected!
Thanks for this info! I was able to update the SW from the LG Support Tool program but I had to switch to another computer to do it, and after several tries it finally took.
For this LG-P769 I had to hold the volume up button with the battery out and it went into the SW update mode on the phones screen. The update stopped after 33% update and I had to disconnect and install the battery, start the phone and let the Security Error extinguish, then plugged the USB cord back in and click the retry button of the tool, then it updates. Yes!
Note, wait until the phone reboots to the normal operating screen even though the tool says its done. This tool approx. 2 more minutes.
The phone is no longer rooted but it kept all the original apps except "Superus".
Not working for me, any help?
I have an LG-LS970, and I've made it to the point where the recovery software was downloaded and extracted, but something is causing an error and not letting the process finish. I assume this is the faulty ROM on the phone, since my phone is bricked from rooting and deleting Google Play apps (I was stupid and thought they weren't important to have). Any ideas?
If you had the recovery software installed you could of installed the gaps. Zip files through it.
Sent from my LGMS769 using XDA Premium 4 mobile app
Please help i've been at this for 2 days
I moved a boot.img file to my Metropcs LG optimus L9 lgms769 and now I am stuck at the security error. I rooted the phone but did not have the bootloader unlocked. I have tried the update tool and it stops at 4%, when I can get it to work. I haven't either understood the other methods mention or something, idk. Anyway, I would really like to get my phone working. Can someone please give me a good way to do this. I have the V10E_00.kdz file already. Thankyou
I already have the latest version but need to repair
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
ivocado said:
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
Click to expand...
Click to collapse
Hi ivocado, you could try this way:
http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Thank you!
BajoPrimate said:
Hi ivocado, you could try this way:
http://forum.xda-developers.com/showthread.php?p=50729855
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
ivocado said:
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
Click to expand...
Click to collapse
Hi ivocado, you're welcome, I'm very, very happy with your success.
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
ivocado said:
Thank you so much! I totally overlooked the recovery option in the tool. 30 minutes later and I have my phone back working perfectly. So happy! :good:
I took it to the T-Mobile store this morning and all they wanted to do was sell me a new one, saying the phone was dead. I owe you. Can I buy you a beer? Seriously, if you have PayPal I'll do it.
Click to expand...
Click to collapse
Do you have any photos or screenshots on how your lg support tool looks like? Im having some difficulty since the software doesnt download.
ivocado said:
Thanks for the instructions! I followed the steps and everything basically works but once the phone is in software upgrade mode, the LG tool just says "Your device has the latest software available from the LG Mobile Support Tool" and it doesn't install anything.
What happened is I rooted my phone and removed one too many system apps, now it won't boot up anymore. How can I get this tool to reinstall the same software I already have? Do I need to wipe it completely? Please help me out, I'm afraid I'll make it worse if I try anything else.
Click to expand...
Click to collapse
Re install stock ROM!
perfect with lte2
punjabi4life said:
I have made this tutorial due to me not finding any other tutorials on fixing the problem presented in this guide. Dear admins if there is another guide on how to fix this problem please feel free to do what you must to this thread. Thank You
First of all is if you have the security error problem on your phone I can assure you that it is NOT bricked and can be fixed.
Also I am not and will not be accountable if this guide does not fix your phone. I also will not and should not be held accountable if this guide is to further damage anything of your phone.
PROCEED WITH CAUTION; Please Pre-Read this guide and understand it before proceeding.
Okay so I will guide you through on how to fix the security error problem most people have on their LG devices. I had encountered this problem on my friends LG MS769 (Optimus L9 – MetroPCS). This guide should work for mostly any LG phone.
This happened to me when I was flashing a custom recovery for the phone. I had successfully rooted the phone using a guide located at:
androidforums.com/optimus-l9-all-things-root/759935-how-root-metropcs-l9-lgms769.html
By following the above guide you will be able to successfully root and install SuperSU on you LG MS769. But keep in mind that even though it will root the phone is will NOT, I don’t know how to emphasis this as much, it will NOT: Unlock the BootLoader, Flash a custom recovery, or let you install a Custom Rom.
But let us come back the topic at hand. Okay so to fix this problem we will need the following.
LG Mobile Support Tool -- B2CAppSetup.exe -- Attached
A reliable Internet Connection
A computer with Windows XP/Vista/7/8 – (Untested on Windows 8)
TIME and PATIENCE --- We will be downloading a file about 500MB give or take some.
Okay let us begin in our endeavors of fixing our problems.
First use the below download link to download the LG Mobile Support Tool
After downloading that place it on your desktop and run it as administrator
After you run B2CAppSetup.exe it should automatically open the Mobile Support Tool, if not there should be a new .exe created on the desktop called LGMobile Support Tool just double click and open that.
Let the program update and install any necessary files that it requires. (It should automatically start to update and install, it should just prompt you with a UAC window)
Once you see the program open, click on the Install USB Driver button on the top left-hand side
Then a new window will come up asking for you for the phones carrier and the phones model number.
Once you are successfully done installing the drivers, we can proceed to the restoration process of the phone
Okay now we need to put the phone in S/W Upgrade Mode.
a.Remove phone battery, if it does not have a removable battery make sure phone is off
b.While holding down the VOLUME (DOWN or UP or BOTH) BUTTON(S) insert the microUsb in the phone while also having the USB side connected to the computer already. (To enter S/W mode it varies phone to phone which volume buttons must be pressed, try all three options)
Once the phone is in S/W Upgrade Mode the computer will start to install the drivers and the LG Mobile Support Tool will automatically detect it and start the restore process
a.Keep in mind that this process takes its time and should more than likely complete successfully giving you a working phone
b.NOTE: I have read some people calming that the process gets stuck at 4% and does not go on. If it does happen to get stuck at any percentage let it stay there for a while and see if it does go on, if not I would recommend retrying once on the same computer and if it still does not work I would give a second recommendation to try on another computer. Other than that I would suggest you contact you phone carrier or LG.
If all goes well you should have a fully functioning factory restored LG phone. Congratulations!!!!
Hope this guide was of help and I wish you best of luck in your further endeavors. :good:[/QUOTE
Ok its perfect but when install spinx.zip cstm rom it stucks n same lg security eror
Click to expand...
Click to collapse
izhar_ulhaq said:
Ok its perfect but when install spinx.zip cstm rom it stucks n same lg security eror
Click to expand...
Click to collapse
Hi izhar_ulhaq, if you don't unlock the bootloader, you can't flash a custom recovery nor install a custom rom.
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Help! The LG Mobile Support Tool is frozen at "Analyzing phone setting..." and I am at the S/W Upgrade screen.
I forgot to unlock the bootloader before installing custom recovery..
how to fix lg security error issue
yup i did just that now my phone works fine i have a metropcs lg ms770 the only thing peoploe should realize is that it takes time the computer tells you its updating and its done but when you check your phone it's really back to the same issue . you guys need to try it couple of times if it dosent work the computer needs to make that connection in order to run perfect if theres no connection theres no udate keep that in mind peace......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it working? My phone is in S/W Upgrade mode, but I don't see any upload bar anywhere
Background:
I originally had CWM and custom rom install on my phone. I decided to install a new rom, but the installation failled and Aroma installer kicked me out of recovery. I have no way re-entering recovery, so I used Smart Flasher and the correct ROM to flash the phone back. And now I'm stuck at Security Error.
Related
This tutorial is for the LG L5 II (E455/E460) and shall work on other LG phones too.
Many thanks to @iulykenoby who discovered this method.
To start, download a KDZ firmware for your LG E460 (and other phones) from here: http://lg-phone-firmware.com/index.php
Be sure to match the phone with the right kdz!!!
1. Download LG_KDZ_FW-Update_OfflineFix.ZIP (attached)
2. Download USB Driver http://algmcdn.lgmobile.com/dn/downloader.dev?fileKey=UW00120120425
If you can't boot anymore, enter into download/emergency mode and skip to step 5.
3. Put your phone in debugging mode (menu-Settings-Developer options-USB debugging).
4. Change your usb connection type to LG Software (menu-Settings-USB connection type)
5. Connect your phone to the PC and install USB Driver. After the installation disconnect and connect your phone again (to make sure it is detected).
6. Extract LG_KDZ_FW-Update_OfflineFix.ZIP
7. Run B2CAppSetup.exe and let it install and update itself. You may be prompted to update your drivers.
8. If you've done everything correctly, you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9. Close the official LG Mobile Support Tool.
10. Open Notepad in Administrator mode. (Go to windows menu, type notepad and right-click and run in Administrator mode)
11. Open the hosts file (c:\windows\system32\drivers\etc)
12. Add 127.0.0.1 csmg.lgmobile.com at the end of the host file.
13. Save the file. If the "Save as" dialog opens, it means you're not running notepad in administrator mode and you can't modify the hosts file.
14. Go to windows menu, type cmd and right-click and run in Administrator mode.
15. Drag Automatic Offline Procedure.vbs over command prompt and hit enter.
16. Click OK
17. Click on windows enable icon in system tray to turn ON then click the dialog box OK.
18. Click Ok.
19. Make sure Type is set to 3GQCT and phone mode to DIAG. Select your KDZ file and click Normal web upgrade test.
20. Click on Upgrade Start.
21. Click on Clear phone Software update Registry and then click OK.
22. Software Update Procedure will start immediately. It will take some time to finish.
After the flashing procedure, don't forget to delete that line you added in hosts or else you won't be able to officialy update (online) your phone and you won't be able to download anything from lg. Also, a factory reset may be needed after flashing to avoid conflicts with the old app data.
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
marce78 said:
Ohhhhhh thx mircea, work for me. The problem was on step 19, now it's all ok.
Click to expand...
Click to collapse
You're welcome.
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Help me! My l5 e455 no more power
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Thanks for the tutorial. I needed that :good:
alonghinotti said:
I followed all the steps and when the phone is not restarted, came in upload mode! Then I hung up and he did not start anymore!
Click to expand...
Click to collapse
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Work
mircea89fzr said:
Try booting again in upload mode. If I remember right it's: phone off and both volume keys pressed then introduce the usb cable. if you manage to boot in download mode, you can try to flash again. you surely didn't select the right kdz for your phone. be sure of your phone model and search for the right kdz for your phone. If you can boot in download mode nothing is lost, you can fix it.
Click to expand...
Click to collapse
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
alonghinotti said:
It worked! I managed to get into download mode, and downloaded the correct ROM! Thank you!
Click to expand...
Click to collapse
You're welcome! don't forget to press thanks.
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Axims said:
tnx for the useful guide, new E455 owner here.
I'm looking for ROM backup solution, Root of course and a compatible CWM for thise model.
are there such tools out yet or we have to sit tight for a while?
Click to expand...
Click to collapse
For root, the attached file should work (change it's extension from .zip to .exe). Instructions here: http://forum.xda-developers.com/showthread.php?t=2337802
it will root with a chineese tool, but there you'll also find instructions to change it to supersu/superuser.
slipsystem said:
hey man thanks for the tutorial
I have a question though
what is the difference between version 10a, 10b, 10c ect
is it different firmware versions? can I flash a firmware from another country?
Is this official LG firmware?
Click to expand...
Click to collapse
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow down your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
mircea89fzr said:
you can flash any firmware from any country as long as it is for your phone model. i recommend you flash a firmware that's not branded (for ex branded by orange) so you won't have extra software that will slow your phone. on that website you will find firmwares for many phones. our phone (e460) received an update, that's why they are called "a" "b" "c".
Click to expand...
Click to collapse
thanks alot man just the answer I was waiting for.
Malware
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
topkat0 said:
I suggest that you run that VROOT program in a sandbox as it is full of Malware or wait till someone posts an open source root exploitation method.
Click to expand...
Click to collapse
I suggest you change your antivrus. On virustotal.com out of 43 antivirus apps only 1 found it as malware.
https://www.virustotal.com/ro/file/...ace3dbf4a827df5c59748b095a23f2b4314/analysis/
Symantec: WS.Reputation.1 (http://www.symantec.com/security_response/writeup.jsp?docid=2010-051308-1854-99 )
I and others used vroot and had no problem with viruses or such. Stop spreading false information.
Malware
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
topkat0 said:
Mircea,
I dont use or trust online scanners I prefer to use IDA and other tools to examine software. If you examine the software more closely you will find that it sends your PC information back to the author. It will also do an update check and install of the latest version automatically. It will also install an apk for a chinese file sharing site and multiple other files that he leaves in the phones system. I also rooted a test phone and it did root perfectly. I was not trying to scare people just give a little warning to be cautious when you install a program that has a primary interface language is not yours. I had no ill intentions just trying to make people aware of what I had found.
Click to expand...
Click to collapse
Yes, it installs a chineese apk because that's the root application (just like superuser). After installing supersu and deleting the chineese apk I scanned my phone with bitdefender and avg and found no malware.
You also can disable your internet before installing vroot on your computer, root your phone then uninstall it. Then you can scan your computer with any antivrus and antispyware software you want and you won't find a trace of Vroot. Before saying it's full of malware, you should prove it. I just proved with 43 antiviruses that it has no malware and all you're saying is you don't trust them. I also offered a solution to avoid sending information about your computer, IF that was the case. Also, using a sandbox just like you said is also ok.
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
hussain59 said:
How to get into download mode for e450
Sent from my LG-E450 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
slipsystem said:
Remove the battery, then reinsert the battery.
press volup + vol down
plug in the usb cable
.
your phone will start download mode
Click to expand...
Click to collapse
Volume up down both buttons at a time got it thanks btw l5ii has a locked bootloader
Sent from my LG-E450 using XDA Premium 4 mobile app
Sorry, I don't follow this thread anymore and don't keep the files online anymore. There are several other threads to be found.
Softbricked? Don't worry, you can fix it if you can read.
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Add the unzipped tot (firmware) and Megalock dll file to the LGFlashTool folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Put phone in download mode: Turn phone off, push and hold volume up and plug USB cable into phone
Open device manager (Windows Start>control panel>device manager)
Select Port connection for phone (COM and LPT>LGE Android Net for VZW USB Serial Port)
Change the port to COM41 (Right click on the specified port, select properties, left click port setting tab. Click advanced. Change COM Port Number to COM41. Click OK. Click OK.
If you don't see the phone, click View in Device Manager, then click Show Hidden.
Start LGFlashtool. Specify the dll and tot to flash by checking "Select manual mode." Left click the "..." button and select the dll. Left click the "Add" button and select the tot. Click OK to close the file selection window.
Click the yellow arrow and wait patiently. Loading the firmware takes a few.
View attachment 2870130
When FlashTool shows Ready, disconnect the phone for ~5 secs. Upon reconnecting the phone, FlashTool will automatically run. This will take a few moments, so go get a cup of coffee. When the phone shows a blue screen with a bid red 3, you're good to go. Disconnect the phone and pull the battery briefly. Restart the phone and redo the setup. Shutdown Flashtool to prevent any accidents when rerooting.
New LG G3 for you and me! [emoji106][emoji106][emoji106]
Here is an alternate method using KDZ developed for people who took the C update.
http://forum.xda-developers.com/showthread.php?t=
[emoji12]
Reserved.
Thanks to @216Monster and @droidkevlar for the additional download sites and support.
There are several other guides that cover this process in various forums. This is written from my experience after soft bricking with a build prop edit without knowing how to get back to stock first. I hope this guide makes it easier for folks in the same Big Red boat.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Eyalkn said:
I installed the driver on my work computer which is Windows XP and this is what I get in the device manager, it doesn't recognize it although I am connected to the computer in download mode. I have the Verizon LG G3 so I even tried to install the dedicated Verizon drivers that I found in this thread and still no go. Please help on finding drivers for windows XP.
Click to expand...
Click to collapse
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
lexluthor said:
I got that and then I unplugged the USB, waited a few seconds and plugged it back in and it then showed under communications.
Click to expand...
Click to collapse
Thank you it worked and I am back
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
Downloads:
https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing
http://www.mediafire.com/download/6...22jjhk7g3kgz/LG_G3_VS985_10B_03_Stock_TOT.zip
http://fs1.androidfilesharing.com/d123f6f2cfa13038
Download all the files and extract zips.
Install drivers and LGFlashTool (Flashtool will install to path C:\LG\LGFlashTool)
Click to expand...
Click to collapse
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
dlscott1111 said:
Couldn't get the flashtool to download. One file is an .ink file and nothing happens when i try to download the flashtool at the right of the screen.
Edit: Got the files downloaded, when I run flashtool without a device attached it has a login screen, I'm assuming this won't occur if the phone is hooked up to it?
Click to expand...
Click to collapse
Yes.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
I am an experienced Android hacker, and still got a bit lost with the tutorial. While I appreciate the excellent work here, you might consider editing/adding the information to help clarify the following:
1. The TOT file at http://www.mediafire.com/download/6i..._Stock_TOT.zip, https://drive.google.com/folderview?id=0B7379qhBA5bnVWQwLU9GNkk3ZGs&usp=sharing, and http://fs1.androidfilesharing.com/d123f6f2cfa13038 are all identical - and we only need one or the other. Please identify the other TOT links as mirrors to the same file, so people aren't downloading all of them unnecessarily (especially as they each are so very large).
2. There is already a MegaLock.dll file installed in the LGFlashTool folder once the application is installed. When you say add .dll files to the LGFlashTool folder, please clarify if MegaLock.dll needs to be overwritten by the other file with the same name (found in Setup_LGFlashTool_1.8.1.1023.zip), or otherwise. It might also help to clarify specifically which dll files are moving to the LGFlashTool folder, and from where. I ended up overwriting the default MegaLock.dll with the one you provided before I started the process...
3. Ports won't often show in Device Manager unless you go to View and then Show Hidden Devices in the Device Manager application.
4. After clicking the yellow arrow, unplugging and plugging the phone back in did nothing to start the process. Nor did plugging it back in while holding volume up (like in your 2nd step). I had to unplug, power the phone on, and then when the red Verizon screen appeared I plugged back in. This triggered the start of the Flash process. An easy way to tell you're in the right spot during the process: the red Verizon screen will disappear and a Firmware Updating screen will pop up to show you progress on the phone. When done, the phone will power cycle automatically...then, after a few other brief items, the red "3" on the blue screen will appear.
WARNING: Don't forget to close the LGFlashTool on your PC when you're done. Because...if you have anything else to do during the same session (such as rooting the phone), when you power cycle the phone while it's still plugged into your PC, LGFlashTool will take over and proceed to flash your phone again!!
Thanks again for your hard work. The tutorial was indeed helpful.
hijax2001 said:
Thanks again for your hard work. The tutorial was indeed helpful.
Click to expand...
Click to collapse
Thanks for the feedback. OP modified.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
tom1226 said:
Sorry if this has been answered in one of the other threads on this topic, but does this reset the root flag/counter like it did on the g2? Thanks.
Click to expand...
Click to collapse
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
As far as I know, but I rerooted immediately.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
Haha thanks. Just curious in case something goes funky hardware-wise. My g2 screen went wonky after a few months and I had to warranty it, unrooting was easy. Hope this pulls through if I ever need to!
Thank you so much for this you saved my ass. I tried to restore my original build.prop but forgot to fix permissions and it totally bricked my phone D:
ins5736 said:
Softbricked? Don't worry, you can fix it if you can read.
New LG G3 for you and me! :thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports. I do see CDC EM, CDC Serial and LGE Android Phone, but when I right click, there is no PORT option to change....
I know I am getting close if I can just figure how to change the port on the device manager.
Any help?
update>>>when i double click the lge android phone in dev mgr, it says drivers are not installed. I have installed drivers. I also tried removing drivers and rebooting then reinstalling drivers, same thing. It shows up but looks like it can't find the right drivers.
>>>>FIXED. Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
viper3two said:
>>>FIXED, SEE BELOW
I'm trying this and I am stuck. Got all files downloaded, installed lg tool and got to the point of restarting the phone into download mode. No problem there. Issue is I can't find the COM ports in the device manager. Running Windows 8.1 pro, don't see a section for the COM ports....Removed lg flash tool. Removed drivers. rebooted. reinstalled everything. plugged in the usb and phone showed up this time, was able to change to com41 and it worked. Not sure what happened but it worked flawless this time...
THANK YOU!!!
Thanks
Click to expand...
Click to collapse
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
ins5736 said:
Glad you got it sorted! The second law of IT support (unistall and start over) saves the day again.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Click to expand...
Click to collapse
LOL!! Yea Im an IT manager so I know that one for sure. If all else fails, reboot or uninstall and start over!
Thanks again for this method, it worked out great. Glad to know I got a fallback if I jack something up
Tony
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
marlowe310 said:
Quick question, apologies if it's idiotic -- basically I (stupidly, it turns out) tried to change my VZW boot animation. No dice. But now I can't get the old one back to working again, which is buggin me out.
QUESTION: Would reflashing to stock in the manner described in this thread completely restore the phone, including that boot animation? I'm just crazy enough about this to actually do it, if it'd work.
Thanks A TON for any info.
Click to expand...
Click to collapse
I would think. I'm new to the g3, but I think this is a tool to restore to stock out of the box. Relating to an Odin restore with Samsung. Someone correct me if I'm wrong.
Sent from my VS985 4G using XDA Free mobile app
It would work. You might want to look around for the boot ani first though.
LG G3 flies faster than a G6
OG RAZR XT912 got 4.4 before S4
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
1. Disclaimer:
Code:
I am not responsible for bricked devices, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed. Please do some research if you have any
concerns about all contained in this tutorial before you follow it! YOU are choosing to
make these modifications, and if you point the finger at me for messing up your device,
I will laugh at you. But since i'm a nice dude i will try to guide you anyway:)
2. General info:
This can be used to flash a new firmware that you will download from LG firmware website. You can upgrade/downgrade your current version.
This can be used for every situation that can get you in a working Emergency mode/Download mode.
This will work/not work (I didn't test) on versions grater than Windows 7 both 32 and 64 bit. I am not going to give support to Windows 8/Windows 8.1. If it works for you it's nice. If not I will ignore the posts like "What can I do not working on Windows 8" and so on. Same thing goes for WINE (windows loader for LINUX). Use this with Windows XP or 7.
3. What we need and getting ready:
a. Firstly, we need the Drivers for our Phone. The drivers I am attaching must be universal for LG but if they do not work for you then you need to search the drivers the manufacture made for your device.
Universal Driver for LG (TRY THIS FIRST BEFORE YOU GO AND DOWNLOAD FROM LG WEBSITE): LG Drivers.
Install the driver (the one I provided first). If your phone is not detected then search on LG website.
*If the ones I provided don't work you can fine the ones for your phone here: http://www.lg.com/. Search in the right up corner the model of your device. Select it. At download section (in the right of the mini-phone picture) you will see Software Updates & drivers. Select that and download the USB Drivers for Windows.
b. Secondly, we need the KDZ image that you want to flash. I am not going to provide any; you will download the one that you want FOR YOUR DEVICE (do not use any KDZ not intended for your device) from here: http://lg-phone-firmware.com/.
Press on the phone you have and download the image you want.
c. In the third place you want to download the tool: LG Flash Tool 2014.
*You need Winrar or 7Zip or any unraring program. Unrar it.
4. The actual flashing:
A)YOUR PHONE SHOULD BE IN EMERGENCY/DOWNLOAD MODE. The keys to do this are different from device to device so search the forums for your key combination. I will provide the way to get in Emergency for the L7 II and maybe L5 II and L3 II. Think this is the same for the first gen devices but can't confirm.
*With the phone turned off (I suggest to pull out battery for 5 seconds then put it back to be sure) hold Volume Down button and plug the USB cable that you have in your PC. If this doesn't work try holding Volume Down + Volume Up and plug the USB. If this doesn't work search the forums. You might also have a hard bricked device and this method won't work then.
B)Place the KDZ file you downloaded the 3.b. in the same folder that you unrared at 3.c. and Run as Administrator. (BE SURE TO HAVE THE KDZ FILE IN THE SAME FOLDER AS THE TOOL. The file i took for example is "Stock JB ROM.kdz").
*If you can't open this program then you need to instal this: C++ Libraries.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C)This will appear. Leave all the way it is and press the little folder in the right.
D)Select the KDZ you placed at point 4.B. and press Open (DO NOT SELECT RA or RC KDZ).
E)After you pressed Open you are back to the main screen you saw at point 4.C. Good.
Press Normal Flash (the left option) if you want to flash new KDZ preserving data (no data will be deleted). I do not suggest this because you might get a bootloop and you need to hard-reset (will wipe data). Always have all data backed-up.
Press CSE Flash (recommended) if you want to flash new KDZ with full wipe of data.
After selecting what you want you will get this screen.
Press START.
D)After you pressed START you will get this. DO NOT CHANGE ANYTHING, press OK.
E)Another dialog will pop and will flash your phone. First it will check USB connection but you already have USB connected when you got in Emergency so you should be fine. I assume you checked drivers at the Driver step so I assume there will be no problems.
IMPORTANT: DO NOT EVER DISCONNECT THE DEVICE EVEN IF YOU THINK IT'S STUCK, THE WINDOW GOT BLOCKED, IT DOESN'T SHOW ANYTHING OR ANYTHING ELSE. YOU CAN DESTROY YOUR DEVICE DO NOT UNPLUG AFTER YOU PRESSED OK AT STEP 4.D. WHEN THE DEVICE REBOOTS LEAVE THE USB IN FOR 2 MORE MINUTES THEN YOU CAN UNPLUG.
F)In some cases you might get a bootloop after 4.E. is completed. All you have to do is hard reset your device. Search the forum for specific hard-reset procedure. In P710 it's like this: with powered off device hold Volume Down + Home button and press Power. When you see LG logo stop holding Power. Keep other 2 buttons until you see android guy.
That's all folks and now the credits:
@quangnhut123 - He made this tool for us
me - Well I wrote this haha.
If you like it please consider donating. Thanks ^.^. Also do not forget to at least press THANKS button.
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
daniels1221 said:
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
Click to expand...
Click to collapse
Do not remove the phone. It can stuck. Let it stay if it doesn't give an error.
works on Windows 8.1
Unable to update maybe connection error
i have attached screenshts . my device is connected as device manager says but still connection error. okease help
Trying to fix my LG Optimus L5 II
Hi guys, i'm having troubles with this method, tried both on win8.1 and 7 and i can't find a solution, maybe my phone is gone forever.
My problem is bootloop, and the phone isn't unrooted or modded in any way.
I'll explain what i tried:
-Hard reset (volume down+quickbutton+powerbutton) -> it only keeps vibrating an never showing the LG logo, when i release the buttons it just starts as normal (obviously bootloops).
-Update recovery with LGMobile Support Tool -> phone connects, firmware finish download, and then when it starts updating it just stops and says update failed for some reason.
-Flashing with LG Flash Tool 2014 -> It crashes after the extraction, maybe when it starts to flash.
thank you so much!!!
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
honeyybagel said:
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
Click to expand...
Click to collapse
You are welcome my friend. Usually this tool has problems on windows 8.1 (the errors you are talking about). With a Windows 7 machine works from first try. I am satisfied that I made your day. Peace out
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
DS_katauri said:
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
Click to expand...
Click to collapse
It is not cdma but doesn't have any impact. I can flash from emergency with Diag Mode also since the LG Modem is picked up in device manager in Emergency, so it should work.. Also I said that phone should be in emergency
neutrondev said:
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
....
Click to expand...
Click to collapse
Hello mate. Thank you for the tutorial. It's now very easy using LG Flashtool 2014.
All of the instructions worked for my L7 II P714. Now I have a clean stock JellyBean rom without the silly customizations from the Operator.
This L7 II has a very nice camera!
I got the clean JB KDZ from here:
HTML:
JellyBean V10E_00
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW54TARE02PNAJ2373E0W7A/V10E_00.kdz
It's from Panama.
Cheers.
- Leonardo
Thanks!
This project is now discontinued. Peace out.
Sent from my LG-D855 using XDA Free mobile app
Help me!
so i have an lg optimus l9 2 and it's stuck on boot loop i followed every step carefully but the lg phone software website does not work! i can't search for anything so i can't get the kdz required to fix this problem can anyone provide a link where i can find the right kdz for my lg optimus d605 model from germany? thanks :good:
The tool works 100% on Windows 10 (Pro, 64-bit, Creators Update). You don't need any special drivers, they are built into Windows 10.
There seems to be two problems. But fixing one will fix the other. So I'll go there first.
I can no longer get LGUP to recognize my phone. Fix this and I can reflash LGH962AT-ROOT and start over. My computer recognizes my phone and I can transfer files between them.
It is really hard to get into recovery, but I have through LGUP. My recent attempts shows the dead droid with the red triangle. I think I may have killed recovery and that may be why I can't use LGUP.
My phone otherwise mostly healthy. :good: I can't get Xposed to install and work. I had it working before my last reset. I accidentally killed my Contacts and Dialer. I can't Flashify/FlashFire LGContacts. 20/20 hindsight - I forgot to TB before messing with the Dialer/Contacts.
I am 100% willing to lose everything and start from scratch. If someone could help me get LGUP to work again I will be so grateful.
At least I didn't soft or hard brick it. . . . . . this time. (See my signature)
Can somebody help me to reconnect to LGUP? I have researched and found nothing that worked. (unless I did it wrong)
I'm begging and pleading here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seriously guys. I need help. I'll even pay for the help.
I give you my fix cause i had the issue to. 2 things. Lg up and drivers.
1. Download uninstaller from iobit
2. Uninstall lgup and its dll (use batch uninstall to uninstall at the same time)
3.once uninstalled you see an option called powerful scan. Click it and then delete all them files it picks up.
4. Install lgup and its dll file
5. Reinstall the drivers with the phone pluged in
6. Run lgup and it should work. If you need the files. The lgup tool plus dll and drivers i dont mind helping out. I really hope this helps
It almost worked. LGUP couldn't find my phone as usual. Then as I was about to give up, when it asked about Port and Version. As soon as I clicked to continue, it errored. I will try again in an hour. From scratch from your instructions.
LASERWOLF452 said:
1. Download uninstaller from iobit
2. Uninstall lgup and its dll (use batch uninstall to uninstall at the same time)
3.once uninstalled you see an option called powerful scan. Click it and then delete all them files it picks up.
4. Install lgup and its dll file
5. Reinstall the drivers with the phone pluged in
6. Run lgup and it should work. If you need the files. The lgup tool plus dll and drivers i dont mind helping out. I really hope this helps
Click to expand...
Click to collapse
I followed it to the letter. I think it might be my phone, not my computer. Again, I will try once more in an hour.
Lord Sekhmet said:
It almost worked. LGUP couldn't find my phone as usual. Then as I was about to give up, when it asked about Port and Version. As soon as I clicked to continue, it errored. I will try again in an hour. From scratch from your instructions.
I followed it to the letter. I think it might be my phone, not my computer. Again, I will try once more in an hour.
Click to expand...
Click to collapse
Ok i wanted to try to help i have the v10 vs990 and at times it give me problems so i hoped it would work for your v10 even if its another carrier. If it dont work. At least i tried to help u out
I redid all the steps. I got nothing. Not even the blip of hope I had gotten before.
Any other ideas?
Again, I am willing to pay and ship my phone if necessary. It is that bad.
Lord Sekhmet said:
I redid all the steps. I got nothing. Not even the blip of hope I had gotten before.
Any other ideas?
Again, I am willing to pay and ship my phone if necessary. It is that bad.
Click to expand...
Click to collapse
sorry it did not work out, i wish i knew but thats all i can think of, i do hope someone can help you out
I got a little hope. I got LGUP to not shut down completely. I am stuck on Model List COM3. Problem is it has Model Unknown.
Also, I am trying to contact LG Service & repair to see if they can save my phone.
Does the lg bridge software recognize it?
Sent from my LG-H901 using XDA-Developers mobile app
The LG Bridge helped a lot. My phone isn't fixed yet, but things are looking much better.
LG Bridge updated my phone to Marshmallow. Lost root of course. But I still don't have the missing programs, LG Contacts and LG Phone.
I uninstalled LGUP and Mobile Driver and then re-installed them. I got an interesting note.
*EDIT re-ran Mobile driver. No errors. I still can't get LGUP to recognize my phone.
Device driver software was not successfully installed
Unidentified Devise X Failed
LGE Mobile USB Composite Device ✔ Ready to use
LG V10 ✔ Ready to use
LGE Mobile USB ✔ Modem Ready to use
LGE USB Serial Port (COM4) ✔ Ready to use
Unidentified Device X Device unplugged
You can change your setting to automatically search Windows Update for drivers
Change Setting
Lord Sekhmet said:
The LG Bridge helped a lot. My phone isn't fixed yet, but things are looking much better.
LG Bridge updated my phone to Marshmallow. Lost root of course. But I still don't have the missing programs, LG Contacts and LG Phone.
I uninstalled LGUP and Mobile Driver and then re-installed them. I got an interesting note.
*EDIT re-ran Mobile driver. No errors. I still can't get LGUP to recognize my phone.
Device driver software was not successfully installed
Unidentified Devise X Failed
LGE Mobile USB Composite Device Ready to use
LG V10 Ready to use
LGE Mobile USB Modem Ready to use
LGE USB Serial Port (COM4) Ready to use
Unidentified Device X Device unplugged
You can change your setting to automatically search Windows Update for drivers
Change Setting
Click to expand...
Click to collapse
When I updated to MM the "same" happened, it didnt install the apps I had deleted or frozen with Titanium Backup. I guess if we choose refurbish instead it will wipe the phone and install all standard apps
melorib said:
When I updated to MM the "same" happened, it didnt install the apps I had deleted or frozen with Titanium Backup. I guess if we choose refurbish instead it will wipe the phone and install all standard apps
Click to expand...
Click to collapse
LG Bridge installed some of the programs I removed. The Google crap. The phone/contacts was not reinstalled.
Also, LG Bridge has no choice between refurbish or upgrade. LGUP does, but it doesn't recognize my phone. Now if I could get it to, then I could fix it myself.
:laugh: I got LG Phone and LG Contacts back. I did a Factory Data Reset and I got those two critical apps back. Unfortunately, I am still on Marshmallow, that doesn't have root, yet.
I still can't access LGUP. (Yes, going through the whole uninstall - install routine)
Is there another method of rooting / flashing LGH962AT-00-V10b- . . . -ROOT besides LGUP?
*EDIT 1* LG Bridge will let me restore from a backup. *.lbf / *.idx / *.brinfo Does anyone have a a H962 rooted Lollipop file I can use?
*EDIT 2* If I Enable OEM unlock in Developer Settings and remove the battery for a minute. Replace battery and do not touch the power button. Hold the Volume Up button and attach the computer cable and boot into Download Mode. Then open LG Bridge and click on software update. When it says I'm up to date, start LGUP I get . . . Model Unknown / COM6. (I did't do a uninstall - install of LGUP)
I'm getting closer. Tomorrow I'll do a full uninstall - install routine of the LGUP. Maybe I'll get lucky.
Lord Sekhmet said:
:laugh: I got LG Phone and LG Contacts back. I did a Factory Data Reset and I got those two critical apps back. Unfortunately, I am still on Marshmallow, that doesn't have root, yet.
I still can't access LGUP. (Yes, going through the whole uninstall - install routine)
Is there another method of rooting / flashing LGH962AT-00-V10b- . . . -ROOT besides LGUP?
*EDIT* LG Bridge will let me restore from a backup. *.lbf / *.idx / *.brinfo Does anyone have a a H962 rooted Lollipop file I can use?
Click to expand...
Click to collapse
Well thats good you got it working. Sucks to be on mm tho.
MM is not bad, I dont miss root as much as I did before I had the LTE bands needed :good:
:laugh: :highfive: I got ROOT!!!! again.
For others here is what I did.
First, LGUP has an update. I downloaded it.
Linky-LGUPnew.zip Normal setup. Move the Common folder to the LGUP folder.
The Mobile Driver stayed the same.
I was on Marshmallow. But H962 doesn't have a rooted MM version. So I used my original rooted TOT. (LGH962AT-00-V10b . . . ) First I Chose UPGRADE in LGUP. I crashed my phone. I did it again but REFURBISH. I backed up everything via LG Bridge first. It worked! I got root, but I must restore my stuff.
LG Bridge did not restore anything for me. I stupidly forgot to also LG Backup via the phone app. It probably failed because I went from Marshmallow to Lollipop. It is worth it to me to BLOCK ALL %&^&#^% ADVERTISING.
DIE ADVERTISEMENTS DIE
So, I have no problem reinstalling everything from scratch. If you do, backup you backup's backup. I do have Titanium Backup of most of my apps/files. I "assume" they will work.
Now I have to patiently wait unit H962 has a rooted Marshmallow. Click thanks if this helped you.
Lord Sekhmet said:
There seems to be two problems. But fixing one will fix the other. So I'll go there first.
I can no longer get LGUP to recognize my phone. Fix this and I can reflash LGH962AT-ROOT and start over. My computer recognizes my phone and I can transfer files between them.
It is really hard to get into recovery, but I have through LGUP. My recent attempts shows the dead droid with the red triangle. I think I may have killed recovery and that may be why I can't use LGUP.
My phone otherwise mostly healthy. :good: I can't get Xposed to install and work. I had it working before my last reset. I accidentally killed my Contacts and Dialer. I can't Flashify/FlashFire LGContacts. 20/20 hindsight - I forgot to TB before messing with the Dialer/Contacts.
I am 100% willing to lose everything and start from scratch. If someone could help me get LGUP to work again I will be so grateful.
At least I didn't soft or hard brick it. . . . . . this time. (See my signature)
Click to expand...
Click to collapse
Does the LGH962AT use Tungkick's Rooting method?
If so, you could probably do an "Upgrade" while your phone is in Download Mode when rooting with the TOT file. That fixed a lot of issues I had on my phone and I didn't lose my important files, which by the way, I have to transfer to my SD Card.
RobertVanHagar said:
Does the LGH962AT use Tungkick's Rooting method?
If so, you could probably do an "Upgrade" while your phone is in Download Mode when rooting with the TOT file. That fixed a lot of issues I had on my phone and I didn't lose my important files, which by the way, I have to transfer to my SD Card.
Click to expand...
Click to collapse
First, I appreciate your reply . . . But . . . Tungkick uses LGUP, which my phone wouldn't connect to. The latest update to LGUP fixed that recognition problem that and I was able to fix my phone via LGUP.
I will see if I can change the title to SOLVED.
Lord Sekhmet said:
First, I appreciate your reply . . . But . . . Tungkick uses LGUP, which my phone wouldn't connect to. The latest update to LGUP fixed that recognition problem that and I was able to fix my phone via LGUP.
I will see if I can change the title to SOLVED.
Click to expand...
Click to collapse
Got it! Glad you were able to solve your issue.
Hi Guys,
Need some help, I wanted to bring my G5 back to stock, I had it running CM but had 2 many bugs for me so I followed some guides and I got so far but now my G5 is stuck on the download mode screen, I cannot boot into recovery or anything it always ends up on this screen, I tried downloading LgUp and Lg flashtool and downloading the correct KDZ files and no matter what i try it fails, LG Flash tool comes up with error (S) Failed to load. and when i can get lgup to recognize the phone it gets to 10% and fails, Ive tried so many guides, differnet KDZ's, USB ports and uninstalls and reinstalls. Any ideas?? Back using my G4 on CM for now!
Any ideas?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i had some issues with correct drivers. take autoprimes 10c or whatever his last was and reinstall lg up as the test dll file for 10i messes lg up quite a lot.
so I'd suggest cleaning your pc off everything related. and try following autoprime's refurbish process. as long as your device gets recognized it shouldn't be hard bricked.
You can try to use LG Bridge with V10i.
Follow the guide in this link:
http://forum.xda-developers.com/showpost.php?p=69122610&postcount=229
Gesendet von meinem LG-H850 mit Tapatalk
I have got same problem. The phone is detected as firmware v10i so you must use dll modify trick from other post in kdz uprade section (there is proper dll file for upgrade to v10i). When you change dll from v10i firmware you choose upgrade (it is important to check option upgrade not refurbished, refurbished you can to after downgrade firmware to v10e) and I choose v10e then you can paste old dll and then you can choose option refurbished now. For me I have the same problem and it was related with dll files in pc and lgup and this procedure help me solve the problem.
KyleGriffiths said:
Hi Guys,
Need some help, I wanted to bring my G5 back to stock, I had it running CM but had 2 many bugs for me so I followed some guides and I got so far but now my G5 is stuck on the download mode screen, I cannot boot into recovery or anything it always ends up on this screen, I tried downloading LgUp and Lg flashtool and downloading the correct KDZ files and no matter what i try it fails, LG Flash tool comes up with error (S) Failed to load. and when i can get lgup to recognize the phone it gets to 10% and fails, Ive tried so many guides, differnet KDZ's, USB ports and uninstalls and reinstalls. Any ideas?? Back using my G4 on CM for now!
Any ideas?
Thanks!
View attachment 3922104
Click to expand...
Click to collapse
Hi,
I was just wondering if you were able to revive your G5? I am in a similar situation. I was running ZV6 on my LS992 and decided to restore it to stock ZV6 but now it's dead, not even the display works(which is very weird). Following is the status of my phone, any help would be greatly appreciated:
1. Device has no display(it was working absolutely fine before I restored it to stock ZV6 firmware)
2. Device was not rooted and was running stock ZV6 before restoration attempt.
3. Even though there is no display, phone when connected to USB shows up as COM port, so I am assuming it is stuck in boot loop and even though I can't see, it goes straight to download mode.
4. LG UP Tool will no longer recognize the phone and detects it as Unknown and won't let me continue past the screen to flash.
5. LG Flash Tool, I think I am missing the LS992 DLL. I tried using DLL from UP tool which doesn't seems to work. H850 DLL doesn't work either.
I have read through the forum and information is mixed and nothing leads to anything helpful.
Flash Tool version: 2.0.1.6
Error: Failed (s)
I have all current drivers, LG Bridge and LAB framework installed.
I am honestly at the point where I want to buy Octopus box and get done with this. Lol.
Any help is greatly appreciated!!
mirage_3 said:
Hi,
I was just wondering if you were able to revive your G5? I am in a similar situation. I was running ZV6 on my LS992 and decided to restore it to stock ZV6 but now it's dead, not even the display works(which is very weird). Following is the status of my phone, any help would be greatly appreciated:
1. Device has no display(it was working absolutely fine before I restored it to stock ZV6 firmware)
2. Device was not rooted and was running stock ZV6 before restoration attempt.
3. Even though there is no display, phone when connected to USB shows up as COM port, so I am assuming it is stuck in boot loop and even though I can't see, it goes straight to download mode.
4. LG UP Tool will no longer recognize the phone and detects it as Unknown and won't let me continue past the screen to flash.
5. LG Flash Tool, I think I am missing the LS992 DLL. I tried using DLL from UP tool which doesn't seems to work. H850 DLL doesn't work either.
I have read through the forum and information is mixed and nothing leads to anything helpful.
Flash Tool version: 2.0.1.6
Error: Failed (s)
I have all current drivers, LG Bridge and LAB framework installed.
I am honestly at the point where I want to buy Octopus box and get done with this. Lol.
Any help is greatly appreciated!!
Click to expand...
Click to collapse
When you try turning it on, is there any sound or vibration?
Sent from my LGE LG-H830 using XDA Labs
None. Display is blank but to test, I separated battery and the moment I plug the battery back, it gets detected as com.
mirage_3 said:
Hi,
I was just wondering if you were able to revive your G5? I am in a similar situation. I was running ZV6 on my LS992 and decided to restore it to stock ZV6 but now it's dead, not even the display works(which is very weird). Following is the status of my phone, any help would be greatly appreciated:
1. Device has no display(it was working absolutely fine before I restored it to stock ZV6 firmware)
2. Device was not rooted and was running stock ZV6 before restoration attempt.
3. Even though there is no display, phone when connected to USB shows up as COM port, so I am assuming it is stuck in boot loop and even though I can't see, it goes straight to download mode.
4. LG UP Tool will no longer recognize the phone and detects it as Unknown and won't let me continue past the screen to flash.
5. LG Flash Tool, I think I am missing the LS992 DLL. I tried using DLL from UP tool which doesn't seems to work. H850 DLL doesn't work either.
I have read through the forum and information is mixed and nothing leads to anything helpful.
Flash Tool version: 2.0.1.6
Error: Failed (s)
I have all current drivers, LG Bridge and LAB framework installed.
I am honestly at the point where I want to buy Octopus box and get done with this. Lol.
Any help is greatly appreciated!!
Click to expand...
Click to collapse
Hello! I had this issue a while ago as well, I downloaded the LG Bridge program and used the software update tab to repair this problem! I had then caused the problem a second time and discovered that clicking "Software update" no longer had any effect on my device. I solved that problem by choosing "Update error recovery" it took a few trys plugging my phone in to have it recognize the phone but I later discovered that was my own fault.
Dreigh said:
Hello! I had this issue a while ago as well, I downloaded the LG Bridge program and used the software update tab to repair this problem! I had then caused the problem a second time and discovered that clicking "Software update" no longer had any effect on my device. I solved that problem by choosing "Update error recovery" it took a few trys plugging my phone in to have it recognize the phone but I later discovered that was my own fault.
Click to expand...
Click to collapse
Thanks for replying. I tried that but doesn't seem to work. Could you describe a little more in details on what happened? What baffles me most is no display. I also tried LG mobile support tool, it detects the phone and says software is up to date. When I try to use "Upgrade Recovery" option, it asks me for IMEI which I don't have. I tried a different IMEI for another LS992 and it keeps asking for model and serial no.
Any ideas guys? Still stuck with this thing. Do you think buying a fast charging cable type c- type c will help? I have a aftermarket A to C cable and I am really curious if that could be the reason.
Thanks!
mirage_3 said:
Any ideas guys? Still stuck with this thing. Do you think buying a fast charging cable type c- type c will help? I have a aftermarket A to C cable and I am really curious if that could be the reason.
Thanks!
Click to expand...
Click to collapse
It's worth a shot, if you do buy official charger for this phone. Think I seen it on amazon for like $20 or something.
Sent from my LGE LG-H830 using XDA Labs
Nick216ohio said:
It's worth a shot, if you do buy official charger for this phone. Think I seen it on amazon for like $20 or something.
Sent from my LGE LG-H830 using XDA Labs
Click to expand...
Click to collapse
Yeah! Thanks. But, I think I will just wait for Octopus box to arrive. It shipped from China and has an estimated delivery of 3 weeks. Lol. I will post the results if it helps revive this device.
mirage_3 said:
Yeah! Thanks. But, I think I will just wait for Octopus box to arrive. It shipped from China and has an estimated delivery of 3 weeks. Lol. I will post the results if it helps revive this device.
Click to expand...
Click to collapse
Smart man, I wish I had 1 of those.
Sent from my LGE LG-H830 using XDA Labs
Resolved with octopus box. It even has a direct unlock for LS-992 and also enables apn to stick.
mirage_3 said:
Resolved with octopus box. It even has a direct unlock for LS-992 and also enables apn to stick.
Click to expand...
Click to collapse
Your just the man I wanted to talk to. I plan on buying 1. Went well without a hitch?
Sent from my LGE LG-H830 using XDA Labs
Nick216ohio said:
Your just the man I wanted to talk to. I plan on buying 1. Went well without a hitch?
Sent from my LGE LG-H830 using XDA Labs
Click to expand...
Click to collapse
Yeah man! It's awesome. They have a very well organized and updated repository for firmware files too. Most of the operation is simple and pretty straight forward. I was so done with LG Flash Tool and all that garbage. Lol. This purchase of ? box out of frustration is probably one of my best decisions. Lol. If your looking to unlock H830, it's not yet supported. I think T-Mobile is the only one without direct unlock including H811. I simply love Verizon for this reason. Lol.
Let me know if you have any questions. I might sell this box to you since my goal is now established. Haha.
mirage_3 said:
Yeah man! It's awesome. They have a very well organized and updated repository for firmware files too. Most of the operation is simple and pretty straight forward. I was so done with LG Flash Tool and all that garbage. Lol. This purchase of ? box out of frustration is probably one of my best decisions. Lol. If your looking to unlock H830, it's not yet supported. I think T-Mobile is the only one without direct unlock including H811. I simply love Verizon for this reason. Lol.
Let me know if you have any questions. I might sell this box to you since my goal is now established. Haha.
Click to expand...
Click to collapse
Cool thanks for the info. You can make pretty much make all your money back and then some. By repairing for people on ebay and other sites. You should keep it for that reason and future brick phones of yours.
I agree LG flash tool being garbage. I've seen others hard brick with that program. Some of even the soft bricks can be a pain in the butt to fix.
Yeah I might be interested if you still end up selling it. I just gotta save a few pay checks up first. Do you have a decent feedback account with ebay or Amazon?
Sent from my LGE LG-H830 using XDA Labs
Nick216ohio said:
Cool thanks for the info. You can make pretty much make all your money back and then some. By repairing for people on ebay and other sites. You should keep it for that reason and future brick phones of yours.
I agree LG flash tool being garbage. I've seen others hard brick with that program. Some of even the soft bricks can be a pain in the butt to fix.
Yeah I might be interested if you still end up selling it. I just gotta save a few pay checks up first. Do you have a decent feedback account with ebay or Amazon?
Sent from my LGE LG-H830 using XDA Labs
Click to expand...
Click to collapse
Yep. I agree, it definitely is a very handy tool considering the amount of hrs I have spent since the LG G2 and Samsung Galaxy S2 days, I should have bought this long ago. Haha. I do have a good eBay account, we can pm.