Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Pureemousseline said:
Hi everyone, i've got a huge problem with my i9300, i've got the foxhound/[email protected] rom since a week, and everything worked fine, i updated once without problems, however today i did the update with usual procedure, but now i've rebooted and i'm stuck on a bootloop after the apps optimizing part, where Android tries to optimize two apps, then open them, but then boot animation starts again over and over.
I tried going into recovery but it did not do anything, so i i tried flashing CWM via Odin, however now if i try starting in recovery only the samsung boot screen shows up and stays there forever.
Please help me
Click to expand...
Click to collapse
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
gee2012 said:
Go to CWM recovery and do a data/factory reset, wipe cache and dalvik cache, reboot and restore your apps.
Click to expand...
Click to collapse
Well, problem is i cannot access recovery, but thanks for helping
Go in downloadmode and flash a stock rom with Odin. See item 2 and 3 in my signature
Sent from my GT-I9300 using xda premium
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Pureemousseline said:
Is it possible to do so without wipe data ? I've got loads of things in there and my precedent Ti backup does not include them
Click to expand...
Click to collapse
Well just installedit, still the same bootloop problem, just boot screen changes
Up, please help me, i'm so desperate right now
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
JJEgan said:
Flash Root via ODIN .
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
then recovery and Nandroid restore .
Fails then .
Wipe phone flash stock rom via Odin .
jje
Click to expand...
Click to collapse
THANKS SO MUCH FOR THIS I MANAGED TO GO TO RECOVERY AND DO THE UPDATE AGAIN, NOW MY PHONE WORKS PERFECTLY WITHOUT LOSING DATA !!!!
Thank you really really much for this
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Newbees said:
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Click to expand...
Click to collapse
did you fix permissions ?
slimlo said:
did you fix permissions ?
Click to expand...
Click to collapse
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Newbees said:
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Click to expand...
Click to collapse
yep in recovery mode
I found the fix permission Sir. Shall I flash again the kernel and do a fix permission?
Sir, it's still stuck at the Siyah logo
If you've formatted system as you say you will need to flash a rom, I'm running the latest neatrom lite, I'm confused by your post its 4am here
Sent from my GT-I9100 using Tapatalk 2
Hello sir, sorry if I disturbed your sleep XD no I did not flash a ROM. I just flashed a kernel using ODIN. Should I flash a ROM?
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Newbees said:
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Click to expand...
Click to collapse
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
slimlo said:
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
Click to expand...
Click to collapse
Thanks Sir Slim, I will try to flash the Snapdragon ROM as soon as after I finish downloading it. Because I believe I have cleared out the operating system and other important data on my device, that's why I need a new ROM.
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
[email protected] said:
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
Click to expand...
Click to collapse
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Newbees said:
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Click to expand...
Click to collapse
Nope it's not the right reasons may be you flashed a wrong siyah kernel.
Tell me your android version is it jellybean or ics
Sent from my GT-I9100 using xda premium
I searched the internet and threads on XDA for this problem but couldn't really find one!
The problem is- My Galaxy S3 (GT-I9300) doesn't boot any AOSP/AOKP/CM ROMs! It's just the bootanimation and DONE! For hours and hours the bootanimation only! But I can flash any Sammy 4.3 / 4.4 ROMs! They boot! They work properly!
I used to change to AOSP to Sammy and vice versa so many times with no issues. One day I downloaded the UltimaAOSP Valhalla ROM and flashed it. This was the first time my S3 didn't boot. I flashed custom Kernels like boeffla on it but all in vain. It was stuck on the bootanimation. I flashed NeatROM AOSP on top of it, which worked properly. Then it was with the fusion sp ROM that it didn't boot again. Again I flashed NeatROM AOSP on top of it (it's my favorite ROM), which I used just to copy some other ROM from my PC to my phone.
Now, I'm on my Stock ROM which came with my phone since so long! I'm shocked to see now NO AOSP ROMs are booting! I've used C-ROM, NeatROM, Resurrection Remix and SOKP Milestone. I have the ROMs' ZIP files and also a Nandroid Backup which I made when I changed to other ROMs. Not the ZIP files neither the Nandroid Backups are helping! ZIP files get flashed succesfully (I wipe the data & cache & dalvik-cache every time) and the Nandroid Backups get restored successfully! But always the phone gets stuck on the bootanimation!
I always moved to AOSP from Sammy (never Sammy to Sammy) but this time I gave it a shot.
Result : All the Samsung ROMs are flashing, working properly, even the Nandroid restores boot. I flashed my newly downloaded FlashingDroid Sammy 4.4 ROM which also works.
BUT I CAN'T GET THE AOSP ROMs onto my phone!
My thought (it could be wrong) : Is it to do something with the data in a partition other than system, data, and cache? Some partition which has stored files needed to boot Sammy ROMs and is preventing AOSP ROMs to start?
HELP!
:crying:
MORE UPDATED INFO ON POST #6
::ROBLEM SOLVED:::
Wipe system, data, cache and preload partitions manually in mounts and storage in CWM Recovery.
DONE! AOSP Working!
Suggests something is being left behind that aosp objects to. Try the rescue firmware in general forum, wipe internal sd and preload.
boomboomer said:
Suggests something is being left behind that aosp objects to. Try the rescue firmware in general forum, wipe internal sd and preload.
Click to expand...
Click to collapse
Have lots of data on my internal memory! Still I deleted lots of unwanted files. Any other way to wipe the hidden preload partition other than using Philz Recovery? I remember I flashed Philz after which I couldn't restore any of my Nandroid Backups backed up with CWM Recovery..
Sent from my GT-I9300 using XDA Premium 4 mobile app
In cwm mounts and storage wipe preload
Press thanx if i helped you in anyway...
Update - Got More Info
Update : Just noticed that when it's the bootanimation on the screen after flashing an AOSP ROM, pressing any of the buttons on the phone vibrates the phone vigorously 2 times.. why??
Also, I want to ask about the connection between a kernel and a bootanimation without starting a new thread 'cause I think it's the solution to my problem here.. The data which I probably suspect that prevents AOSP ROMs from booting is some different bootanimation file? I mean when I'm on a Sammy ROM, I started to flash different bootanimations after flashing some CWM Custom Bootanimation ZIP file. The bootanimation changes on all Kernels on Sammy ROMs -except 1 that is the boeffla kernel. The strange thing is that the first custom bootanimation I had flashed (after flashing Boeffla's Sammy Kernel) when I switched to Sammy from my last AOSP was the hTC One Bootanimation which worked fine (the bootanimation successfully changed). After that, it never changed. My phone always booted up showing the hTC One Bootanimation no matter how many times I flashed another bootanimation ZIP or the CWM ZIPs which enable/disable Custom bootanimations. But! When I changed to any other kernel (the stock that came with the ROM/GoogyMax 2/AGNi), the bootanimation was the last one flashed by me before changing the kernel. I could change the bootanimations successfuly every time after that. Now, I flashed Android Revolution HD ROM and was on Stock Kernel. As soon as I changed to boeffla kernel (without flashing any other ZIP), the bootanimation changed! (automatically!) And it was again the same old hTC One Bootanimation.
Can someone please tell me WHERE is this bootanimation data and the data that prevents AOSP ROMs to boot is stored? Certainly not in the data or system or cache partition...
Update 2 : Just figured out where the automatic htc bootanimation magic happened. The hTC bootanimation.zip file was found in data/local . However, I always knew the bootanimation directory as system/media.. So now, is it safe for me to delete all files in data/local 'cause it seems it is the problem for AOSP ROMs?
Sent from my GT-I9300 using XDA Premium 4 mobile app
the main thing i can think of is your trying to go back to jb roms which you cant do as far as i know try flashing kitkat based roms
jimbobpro87 said:
the main thing i can think of is your trying to go back to jb roms which you cant do as far as i know try flashing kitkat based roms
Click to expand...
Click to collapse
I'm not trying to go back to Jelly Bean! I'm flashing AOSP based ROMs of KitKat 4.4.2 which don't boot!
SOLVED!
Yayy!
I guess I got a solution!
Wiped system, data, cache and preload partitions manually in mounts and storage in my CWM Recovery.
DONE! AOSP Working!
:victory:
THANKS TO ALL WHO HELPED! :angel:
Thank you for your post.
I am having the same problem, phone not booting past boot animations using aosp ROMs. Haven't tried Sammy ROM to test the theory yet but will try soon.
How do you wipe preload? In mounts and storage, I get an error when trying to mount or format preload using CWM 6.0.4.7
I don't see an option to wipe anything other than data, cache, or dalvic.
alaska_ryder said:
How do you wipe preload? In mounts and storage, I get an error when trying to mount or format preload using CWM 6.0.4.7
I don't see an option to wipe anything other than data, cache, or dalvic.
Click to expand...
Click to collapse
Strange- it happened that day but not now. Even I get an error formatting preload. But! I guess the problem is the system partition! There IS an option to format /system in mounts and storage option on the first screen.
Sent from my GT-I9300 using XDA Premium 4 mobile app
This is really an old post i think.
But, can someone answer me please, ive been searching for This maybe for more than a year. Can someone please help me? @Paresh Kalinani
I have the exact same issue.
My device: Grand Prime (G530FXXU1AOJI baseband)
Stock android: 5.0.2
Recovery: TWRP 3.1.0.0
I have booted many Samsung roms and also ported many of them like J5's 5.1.1 , On7's 5.1.1 rom and many other 5.1.1 and 5.0.2 roms and all of them work perfectly. But when it comes to AOSP ROMS each of them keeps loading at the booting animation screen. Ive tried many roms like RR, AOSP Extended, Cyanogenmod, LINEAGEOS, All of these 5.1.1 , 7.1.1.
It booted for others with the exact Same variant as mine too.
Please help me?
Id been really grateful.
Thanks,
Eden532
Eden532 said:
This is really an old post i think.
But, can someone answer me please, ive been searching for This maybe for more than a year. Can someone please help me? @Paresh Kalinani
I have the exact same issue.
My device: Grand Prime (G530FXXU1AOJI baseband)
Stock android: 5.0.2
Recovery: TWRP 3.1.0.0
I have booted many Samsung roms and also ported many of them like J5's 5.1.1 , On7's 5.1.1 rom and many other 5.1.1 and 5.0.2 roms and all of them work perfectly. But when it comes to AOSP ROMS each of them keeps loading at the booting animation screen. Ive tried many roms like RR, AOSP Extended, Cyanogenmod, LINEAGEOS, All of these 5.1.1 , 7.1.1.
It booted for others with the exact Same variant as mine too.
Please help me?
Id been really grateful.
Thanks,
Eden532
Click to expand...
Click to collapse
Have you flashed the rom then factory reset?
Beamed in by telepathy.
shivadow said:
Have you flashed the rom then factory reset?
Beamed in by telepathy.
Click to expand...
Click to collapse
Nope.
I wiped system, data, cache and dalvik cache the flashed the rom and the rebooted?
Do I have to do a factory reset then?
Thanks a lot for the immediate response.
Eden532 said:
Nope.
I wiped system, data, cache and dalvik cache the flashed the rom and the rebooted?
Do I have to do a factory reset then?
Thanks a lot for the immediate response.
Click to expand...
Click to collapse
Well, what you did was butter than a factory reset.
Factory reset means wiping data, cache and dalvik cache.
I would like you to do something first, try downloading the latest stock firmware for your phone from sammobile, and then flash it with Odin, then try flash AOSP roms again, maybe you have an old bootloader.
MigoMujahid said:
Well, what you did was butter than a factory reset.
Factory reset means wiping data, cache and dalvik cache.
I would like you to do something first, try downloading the latest stock firmware for your phone from sammobile, and then flash it with Odin, then try flash AOSP roms again, maybe you have an old bootloader.
Click to expand...
Click to collapse
Im running the latest firmware which id flashed through odin.
AOSP roms still not booting.
I had wiped those partitions before i flashed the rom. I did not wipe after i flashed them.
Eden532 said:
Im running the latest firmware which id flashed through odin.
AOSP roms still not booting.
I had wiped those partitions before i flashed the rom. I did not wipe after i flashed them.
Click to expand...
Click to collapse
Are you sure it's the latest one?
Did you check Sammobile.com?
The latest one was released in 1st Feb 2017.
Also please check the IMEI of your phone by typing *#06#, because if you've a problem with efs partition you may not be able to flash any AOSP Rom (happened to a friend before..he had sim working without IMEI!!)
Also what is your country code?
As stated above, check your imei is still OK then from a working stock state:
Root it.
Flash custom recovery.
Flash the custom rom twice and then wipe data/cache. Do not wipe system!.
If that doesn't work then try the above but instead of wipe data/cache do a factory reset.
Beamed in by telepathy.
MigoMujahid said:
Are you sure it's the latest one?
Did you check Sammobile.com?
The latest one was released in 1st Feb 2017.
Also please check the IMEI of your phone by typing *#06#, because if you've a problem with efs partition you may not be able to flash any AOSP Rom (happened to a friend before..he had sim working without IMEI!!)
Also what is your country code?
Click to expand...
Click to collapse
My country code is XSG but ill try flashing the THL latest version and again report.
I was trying to check my IMEI number it shows UNKNOWN APPLICATION but sim and other modem related stuff works really fine.
Is it something to do with this?
shivadow said:
As stated above, check your imei is still OK then from a working stock state:
Root it.
Flash custom recovery.
Flash the custom rom twice and then wipe data/cache. Do not wipe system!.
If that doesn't work then try the above but instead of wipe data/cache do a factory reset.
Beamed in by telepathy.
Click to expand...
Click to collapse
I did flash the custom rom twice but still no good.
(And also i checked the IMEI via a custom Sammy rom)
Eden532 said:
My country code is XSG but ill try flashing the THL latest version and again report.
I was trying to check my IMEI number it shows UNKNOWN APPLICATION but sim and other modem related stuff works really fine.
Is it something to do with this?
Click to expand...
Click to collapse
This is the latest firmware for United Arab Emirates:
https://androidfilehost.com/?fid=385035244224412750
Flash it and see if the problem solved :good:
MigoMujahid said:
This is the latest firmware for United Arab Emirates:
https://androidfilehost.com/?fid=385035244224412750
Flash it and see if the problem solved :good:
Click to expand...
Click to collapse
Thank you so much for sending the link, Its really difficult to download from sammobile.com . Ill check it right away and report. Thanks.
Hey,
I installed Cyanogenmod 11 mith the Installer on my S3. Ran for more than 1-2 month but since today it won't start. My device is always stuck on the bootloader.
What can I do ?
Eroor said:
Hey,
I installed Cyanogenmod 11 mith the Installer on my S3. Ran for more than 1-2 month but since today it won't start. My device is always stuck on the bootloader.
What can I do ?
Click to expand...
Click to collapse
Can you get into recovery or download mode? If yes full wipe in recovery and install a new rom or flash back to stock with Odin and start again.
tallman43 said:
Can you get into recovery or download mode? If yes full wipe in recovery and install a new rom or flash back to stock with Odin and start again.
Click to expand...
Click to collapse
Is there any way to first save personal data (Pictures etc.) ? Abd yes I can get into Recovery / Download mode.
Eroor said:
Is there any way to first save personal data (Pictures etc.) ? Abd yes I can get into Recovery / Download mode.
Click to expand...
Click to collapse
Yes install PhilZ recovery it as a option to use file Aroma to backup and move files look here >> http://forum.xda-developers.com/showthread.php?t=2201860 << especially the "Special Features Guide" also it as custom backup options.
tallman43 said:
Yes install PhilZ recovery it as a option to use file Aroma to backup and move files look here >> http://forum.xda-developers.com/showthread.php?t=2201860 << especially the "Special Features Guide" also it as custom backup options.
Click to expand...
Click to collapse
Hey, that helped. But when I press the Wipe Data/Factory Reset button, the phone just restarts and gets back in loop.
Eroor said:
Hey, that helped. But when I press the Wipe Data/Factory Reset button, the phone just restarts and gets back in loop.
Click to expand...
Click to collapse
Be careful because PhilZ as a option to do a normal wipe factory reset but also a option to install a new rom which formats all the necessary files to do that including your system (rom). This can leave you without a rom to boot into if you don't know how to use it propably,I would just recommend just flashing back to stock with Odin (and don't forget to factory reset after using Odin.
tallman43 said:
Be careful because PhilZ as a option to do a normal wipe factory reset but also a option to install a new rom which formats all the necessary files to do that including your system (rom). This can leave you without a rom to boot into if you don't know how to use it propably,I would just recommend just flashing back to stock with Odin (and don't forget to factory reset after using Odin.
Click to expand...
Click to collapse
Flashed it back. Wiped data - Still bootloop.
Eroor said:
Flashed it back. Wiped data - Still bootloop.
Click to expand...
Click to collapse
If you have tried flashing stock (and you have flashed everything correctly and wiped correctly) and you are still stuck in bootloop the only option I can see is to try the rescue firmware in the stickies forum.
Be very careful and follow instructions carefuly as it containes a pit file,if this failes then I would suggest service repair.
tallman43 said:
If you have tried flashing stock (and you have flashed everything correctly and wiped correctly) and you are still stuck in bootloop the only option I can see is to try the rescue firmware in the stickies forum.
Be very careful and follow instructions carefuly as it containes a pit file,if this failes then I would suggest service repair.
Click to expand...
Click to collapse
Tried to wipe again and booted up. It just took longer than normal (5mins) and then it booted up as normally. Thank you very much !
Now, if I want to flash Cyanogenmod again (Not Installer !), I just have to root and then flash Cyanogen Mod, right ?
Eroor said:
Tried to wipe again and booted up. It just took longer than normal (5mins) and then it booted up as normally. Thank you very much !
Now, if I want to flash Cyanogenmod again (Not Installer !), I just have to root and then flash Cyanogen Mod, right ?
Click to expand...
Click to collapse
Yep I agree don't use installer seen alot of problems with it... If you just want to install Cyanogen Mod (or any custom rom) with custom recovery then you do not need to root (only root if you want to backup or access anything from system), all custom roms come with root included. Just use a custom recovery wipe then flash your rom (factory reset if it bootloops) done.
tallman43 said:
Yep I agree don't use installer seen alot of problems with it... If you just want to install Cyanogen Mod (or any custom rom) with custom recovery then you do not need to root (only root if you want to backup or access anything from system), all custom roms come with root included. Just use a custom recovery wipe then flash your rom (factory reset if it bootloops) done.
Click to expand...
Click to collapse
HI tall man, Same here Ive stuck in Samsung galaxy Siii GT-I9300 Logo only, and i cant also go to recovery mode, which i dont know. but i can go to download mode. this happen after my phone restart automatically. verison 4.4.2 kitkat by archi, Thanks