This is the discussion thread for the development of cm10.1 and cm10.2 and cwm6. Please dont ask how to root and etas for cm. This is only to discuss issues with cm and cwm6. Currently we have got issues with current cwm recovery so we need to work on that first. Problem is that @prbluebottle (the one who helped me getting a proper device tree) says he did compile and flash cm10.2(yes you see right) but sadly it didnt get to boot or to recovery mode. So first we need to work on proper cwm recovery. I'll keep u posted about progress when it happens.
UPDATE[27/12/2013]: We got a working CWM 6.0.2.8 thanks to @Doc_cheilvenerdi.org please guys contiune the furture discussion here. Now we have to work on CM10.1 @mackief dude if have repo synced cm10.1 please compile for us. I can test it if u want.
Ironman38102 said:
This is the discussion thread for the development of cm10.1 and cm10.2 and cwm6. Please dont ask how to root and etas for cm. This is only to discuss issues with cm and cwm6. Currently we have got issues with current cwm recovery so we need to work on that first. Problem is that @prbluebottle (the one who helped me getting a proper device tree) says he did compile and flash cm10.2(yes you see right) but sadly it didnt get to boot or to recovery mode. So first we need to work on proper cwm recovery. I'll keep u posted about progress when it happens.
Click to expand...
Click to collapse
How did you make cwm? Did you use the cwm builder? Do you have source if so where.
We didnt use cwm online builder. We ported it from another device using android kernel kitchen
Sent from my GT-S5282 using Tapatalk now Free
Ironman38102 said:
We didnt use cwm online builder. We ported it from another device using android kernel kitchen
Sent from my GT-S5282 using Tapatalk now Free
Click to expand...
Click to collapse
That's not good send me a boot.IMG and recovery.IMG . Also cat proc/partitions so I can set the correct partition sizes .
@ironman, better if you could upload here the cwm for S5282. So e ery user could use it.
Working CWM
Hnk1 managed to have a working CWM here: http://forum.xda-developers.com/showthread.php?p=46281146
Well me and my friends tried to compile unfortunately the device tree is incomplete but I found out what files are missing and Ill push to github today
Sent from my GT-S5282 using xda app-developers app
There is a seperate discussion made for cwm booting issues. Link is below If anyone can help u can pm op in the thread.
http://forum.xda-developers.com/showthread.php?p=46351688
Sent from my GT-S5282 using xda app-developers app
Just pushed missing device tree files to Github. @prbluebottle try compiling again and notfiy me for any issues
Ironman38102 said:
Just pushed missing device tree files to Github. @prbluebottle try compiling again and notfiy me for any issues
Click to expand...
Click to collapse
Hey bro is it possible to add app2sd support in CM10.1 ??
Not sure how do I do that
Sent from my GT-S5282 using Tapatalk now Free
Ironman38102 said:
Not sure how do I do that
Sent from my GT-S5282 using Tapatalk now Free
Click to expand...
Click to collapse
Modifying the vold.conf, vold.fstab and init.rc and related init files will do i think i am also not sure..
Chirtagh said:
Modifying the vold.conf, vold.fstab and init.rc and related init files will do i think i am also not sure..
Click to expand...
Click to collapse
I have no knowledge of editing linux scripts. I think @prbluebottle knows how to edit linux script. Although we need cm right now. We will do that later when we get a stable and bugless cm
Sent from my GT-S5282 using Tapatalk now Free
Ironman38102 said:
I have no knowledge of editing linux scripts. I think @prbluebottle knows how to edit linux script. Although we need cm right now. We will do that later when we get a stable and bugless cm
Sent from my GT-S5282 using Tapatalk now Free
Click to expand...
Click to collapse
Yeah can wait for that, CWM first priority and CM and so on...
So prbluebottle said that CWM 6 Booted, When it would be avail..?
No it didnt boot. Currently they are some issues that is preventing to boot cwm and cm10.1.
Sent from my GT-S5282 using Tapatalk now Free
Ironman38102 said:
No it didnt boot. Currently they are some issues that is preventing to boot cwm and cm10.1.
Sent from my GT-S5282 using Tapatalk now Free
Click to expand...
Click to collapse
Well bro i'm not good in CWM and CM so Will wait for you people to get over with that issues..
And that app2sd support i'll work on it.. :good:
Pushed proper extract-files.sh and setup-makefiles.sh to github @prbluebottle I hope its okay now. Please try to compile again and notify for any issues
till date cm is not for dual sim if it is ported only single sim will but hope for future cm developers develop for dual sim.
Press thanx if helpes
its totally free
sanchit0403 said:
till date cm is not for dual sim if it is ported only single sim will but hope for future cm developers develop for dual sim.
Press thanx if helpes
its totally free
Click to expand...
Click to collapse
We can do that later actullay. We need a stable cm
Its Going To Be LEGEND--wait for it--DARY!- Barney Stinson(How I Met Your Mother)
Ironman38102 said:
About Working CWM
Click to expand...
Click to collapse
I have working CWM recovery and rooting guide. I guess after that, you only need to work on your ROM. Do not worry about smaller problems. I might lent a hand if time permits! I got Star online and I just wanted to do some experiments as it is a cheap device!
http://forum.xda-developers.com/showthread.php?t=2474165
Related
Ubuntu Touch Developer Preview for the Fascinate
// It took me a while to get it right, but here it is.
//Camera works, wireless internet works.
Haven't checked sound.
Don't know if phone or SMS works.
Need testers.
//How to install: DO A BACKUP FIRST!
Get the zip here Then get this. Go to recovery, do a wipe/factory reset.
//Flash the first zip, don't reboot yet. Go to Mounts and Storage, mount /data and then format it or it won't work.
//Then flash the second zip and reboot.
//After you reboot, don't do an apt update. It seems to bork things up for me. Using adb on your computer, type 'phablet-flash -d grouper -b' (to update to the latest).
Enjoy.
The above is the old way. Thanks to UnjustifiedDev the new build is below:
"Ubuntu touch
1. Download bootstrap http://goo.im/devs/Unjust/Fascinate/...scinatemtd.zip
2. Download preinstall http://cdimage.ubuntu.com/ubuntu-tou...blet-armhf.zip
yes it is 300+mb make sure you have space on your sdcard for it
3. Download layout fix http://goo.im/devs/Unjust/Fascinate/...layout_fix.zip
4. Reboot to recovery wipe data etc then flash bootstrap file first the cm-10.1 zip then reboot recovery
5. in ubuntu's purple recovery flash the saucy zip takes a while to flash make sure your battery is charged
6. Flash layout fix right after saucy zip completes then reboot
7. Note this a preview not a daily driver it is pretty cool but it lacks full features. Wifi works idk if sound works or data my phone is not in service
Source https://github.com/Ubuntu-Fascinate I did fix the layout no need for an extra zip next build "
You are the man, Unjust!!
Remember, it's just a developer preview at this point. Not much you can do with it right now.
Redwolves (meandmine)
[
Since the Fascinate is not my daily driver, I have no way to test 3G or SMS. Anyone want to give a try and post your results?
Thanks, Redwolves
I will keep this updated as much as I can. I'll also put detailed instructions an my github page for anyone who wants to compile their own.
I will put up the instructions on my github page tonight. I'll link to it here when I do.
Redwolves
*face palm* good job dude I was just building it was gonna be a surprise for y'all. You beat me to it lol. Nice job.
Sent from my SCH-I500 using Tapatalk 2
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Unjustified Dev said:
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Click to expand...
Click to collapse
Is it really can't work for the cdma?
Sent from my SCH-I500 using Tapatalk 4 Beta
ekowanz said:
Is it really can't work for the cdma?
Sent from my SCH-I500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Works fine for cdma it uses cm10.1 source so anythibg cm10.1 has it can use.
Unjustified Dev said:
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Click to expand...
Click to collapse
No patch needed boots and works fine for me straight from source but I like android better just lack of apps on Ubuntu. And agreed nice job
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
No patch needed boots and works fine for me straight from source but I like android better just lack of apps on Ubuntu. And agreed nice job
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
I meant patch as in a diff file to see how he modified things
Unjustified Dev said:
I meant patch as in a diff file to see how he modified things
Click to expand...
Click to collapse
I didnt need to modify anything.
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
I didnt need to modify anything.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Im talking source code you cant just build it like a regular rom there is things you need to modify
Unjustified Dev said:
Im talking source code you cant just build it like a regular rom there is things you need to modify
Click to expand...
Click to collapse
I didn't have to modify anything it just used the cm files. Did you follow the official port guide or some off the wall nut job guide here on xda? Maybe I'm just lucky idk. Who cares.
Sent from my SCH-I500 using Tapatalk 2
I followed the porting guide. Commented out AriesParts and Samsung-something-or-other in a makefile in /devices. Patched /kernel/samsung/aries/fs/proc/array.c and /kernel/samsung/aries/arch/arm/configs. I did some other other patches to a makefile in /build. I played with it for about a month using just the phablet-armhf.zip. I had it booting for about 15 seconds after a while. I was going through logcats and trying to trace them back to any warnings thrown during compilation.
Then I found out it uses the grouper image. Voila, instant boot. I left the changes in the source, though.
redwolves said:
I followed the porting guide. Commented out AriesParts and Samsung-something-or-other in a makefile in /devices. Patched /kernel/samsung/aries/fs/proc/array.c and /kernel/samsung/aries/arch/arm/configs. I did some other other patches to a makefile in /build. I played with it for about a month using just the phablet-armhf.zip. I had it booting for about 15 seconds after a while. I was going through logcats and trying to trace them back to any warnings thrown during compilation.
Then I found out it uses the grouper image. Voila, instant boot. I left the changes in the source, though.
Click to expand...
Click to collapse
I'll put up detailed instructions and the code on my github page when I get the chance. Life has 'a life' in it, you know.
Scott
If anyone is having problems, please see if you can grab a logcat and send it to me.
for some reason wen i install the 2nd zip, i get status 7 error
arqda said:
for some reason wen i install the 2nd zip, i get status 7 error
Click to expand...
Click to collapse
You're the second person who has said that. I can't reproduce it on my phone. I need to find a common thread.
What Baseband version are you running?
Thanks, Scott
redwolves said:
You're the second person who has said that. I can't reproduce it on my phone. I need to find a common thread.
What Baseband version are you running?
Thanks, Scott
Click to expand...
Click to collapse
Ill try to give u as much detai l as possible.
Baseband: i500.04.V.EH03
Tried flashing using CWM4, 6, modified6, and twrp
Using 1gb sd card (class ?) To flash
Finally got around to detailed instructions on my github account. It's here. I'll push the code up shortly.
redwolves said:
Finally got around to detailed instructions on my github account. It's here. I'll push the code up shortly.
Click to expand...
Click to collapse
I did all of that except one thing I forgot array.c also we dont need samsung service mode
Unjustified Dev said:
I did all of that except one thing I forgot array.c also we dont need samsung service mode
Click to expand...
Click to collapse
"While in /device/samsung/aries-common, edit device_base.mk. Comment out AriesParts and SamsungServiceMode under
"# Device-specific packages"."
I thought I had it in there.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 JB, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Build:
2/9/14
Link Removed
Gapps - Not needed until build is completely fixed.
Installation
- First time flashing CM-10.1 ROM?
Download Rom to sdcard.
Reboot into Recovery
WIPE: (wipe data/factory reset + wipe cache + dalvik cache partition)
Install the ROM
Working
Gralloc is currently crashing surfaceflinger
Not working
Almost everything due to force closes.
Changelog:
20140209
Updated device tree.
Built hwcomposer and gralloc from source code based on comoyo device tree.
20140208
Initial release with significant changes.
Previous builds:
Taking a logcat on these builds:
As soon as the bootanimation begins to play execute below command via terminal
or command prompt with adb installed for Windows. Upload the file it makes which is logcat.txt
Code:
adb logcat -d > logcat.txt
Special Thanks
Comoyo https://github.com/comoyo for commits for spreadtrum
batman38102 , sambathpkr , and Archit
This is a test build thanks to everyone for helping me
Source (Branch cm-10.1)
https://github.com/CM-SPRD
https://github.com/CyanogenMod
Dude i will help u as much i can. Currently i even didnt own this device Feel free to ask for any support.
Sent from my GT-9505i using Tapatalk
Building now hopefully it boots with more working things after some massive changes I've did a lot of research about this stuff
https://github.com/TeamRegular/android_device_samsung_mint/commits/cm-10.1
Unjustified Dev said:
Building now hopefully it boots with more working things after some massive changes I've did a lot of research about this stuff
https://github.com/TeamRegular/android_device_samsung_mint/commits/cm-10.1
Click to expand...
Click to collapse
Hoping For a Stable Build......:good:
yup we are with u
just keep up the work we really need a cm for our phones by now
let us know for any help ofcourse:laugh::good:
And it's off to building again build had failed previously and now I am able to produce a working cwm as well .
Here's a little surprise same instructions from DOC thread
cm-10.1
http://goo.gl/ZoIYcr
Unjustified Dev said:
And it's off to building again build had failed previously and now I am able to produce a working cwm as well .
Here's a little surprise same instructions from DOC thread
cm-10.1
http://goo.gl/ZoIYcr
Click to expand...
Click to collapse
So for which version of cwm u r porting for s5282
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
So for which version of cwm u r porting for s5282
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
Same one. My issue was my kernel . I did not want to release a build that would get stuck on bootlogo I had batman test recovery to make sure it worked we got it working by pulling defconfig from the device.
https://github.com/TeamRegular/andr...mmit/e8bb5520806d9028a50acf03daf3a1a29a1de8f5
Now I am actually porting twrp since they added a new 240 theme
Unjustified Dev said:
Same one. My issue was my kernel . I did not want to release a build that would get stuck on bootlogo I had batman test recovery to make sure it worked we got it working by pulling defconfig from the device.
https://github.com/TeamRegular/andr...mmit/e8bb5520806d9028a50acf03daf3a1a29a1de8f5
Now I am actually porting twrp since they added a new 240 theme
Click to expand...
Click to collapse
Nice work. Keep it up
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Nice work. Keep it up
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
No ones going to test my cm build?
Unjustified Dev said:
No ones going to test my cm build?
Click to expand...
Click to collapse
Dude i will surely test your cm build but i cant bcoz i dont own this device now. Let me ask from @batman38102
Sent from my GT-9505i using Tapatalk
Unjustified Dev said:
No ones going to test my cm build?
Click to expand...
Click to collapse
Hey i'm going to test it.but downloading is not working.it says some 509 error
sambathpkr said:
Hey i'm going to test it.but downloading is not working.it says some 509 error
Click to expand...
Click to collapse
Go for it dude. Hope it works better than previous one
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Go for it dude. Hope it works better than previous one
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
DONT FLASH IT. It boots but everything force closing so PLEASE DO NOT FLASH IT
problem
I tested it.it booted successfully.but it has issues
1. systemui unfortunately stopped.
2. Unfortunately cyanogenmod cannot be created.
it does not even goes to launcher.:crying:
Unjustified Dev said:
Hi , I am developer I do not own this device. I will attempt at my best to provide a working build on cm-10.1 and maybe we can go even further. If you are able to donate a phone that will speed up the process if not it's ok . I will only work on this on weekends. I ask that anyone interested in helping me please PM me and get on hangouts. I will not be able to chat much nor always answer post. I am not the best developer , but i should be able to fix some things even without the device.
Device source same as the one used to build booting cm-10.1 soon to be rewritten
https://github.com/TeamRegular/android_device_samsung_mint
Kernel source
https://github.com/TeamRegular/android_kernel_samsung_mint
vendor
https://github.com/TeamRegular/android_vendor_samsung_mint
Click to expand...
Click to collapse
Dude note that only deodexed rom seems to work fine on this device
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Dude note that only deodexed rom seems to work fine on this device
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
I am using odexed like DOC. Look at my commit. I am not using software rendering. I have the actual egl and gpu blobs working. I added audio blobs and more. Doc had no proprietary files and it had no reason to force close.
https://github.com/TeamRegular/android_device_samsung_mint/blob/cm-10.1/BoardConfig.mk#L111
Unjustified Dev said:
I am using odexed like DOC. Look at my commit. I am not using software rendering. I have the actual egl and gpu blobs working. I added audio blobs and more. Doc had no proprietary files and it had no reason to force close.
https://github.com/TeamRegular/android_device_samsung_mint/blob/cm-10.1/BoardConfig.mk#L111
Click to expand...
Click to collapse
so r we at a dead end??
hey and i checked the link you sent me
and m not a develpoer so i dint understand a thing:silly:
but some data as i understand it is probably wrong
for eg the device resolution is 240x320
u mite have written it for a reason but i thot i should point out
again i am no developer i just want to help
@rchit said:
so r we at a dead end??
hey and i checked the link you sent me
and m not a develpoer so i dint understand a thing:silly:
but some data as i understand it is probably wrong
for eg the device resolution is 240x320
u mite have written it for a reason but i thot i should point out
again i am no developer i just want to help
Click to expand...
Click to collapse
That's correct unless you were looking at twrp they don't have a 240x320 theme yet. I am not working on this as it's a school day I will only work on free days and weekends.
Sent from my SPH-D710 using Tapatalk
Unjustified Dev said:
That's correct unless you were looking at twrp they don't have a 240x320 theme yet. I am not working on this as it's a school day I will only work on free days and weekends.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
ok cool do u think u can build us a stable recovery and cm
and i know you might be getting a lot of msgs but can u give us an estimate time for a stable build??
thanks a lot for ur help really appreciate it
As always, you are responsible for your phone, and its warranty
I built this recovery because adb was not working in the official. I have submitted all my changes and I am sure this will be fixed shortly but until then I will put this here. Bassically I compiled the stock ND2 kernel with some small modifications and rebuilt the recovery.img with that. everything else should be exactly the same but honestly I did not test everything so please feel free to let me know.
***UPDATE 10/4/14***
Created version thats branded as kltespr, did this so CM11 is now able to auto update without modifying the CM package. Also, ADB still works. If anybody knows how to reduce the size of this image, please let me know since it is a little larger than the stock TWRP. Also built an image from the 2.8.0.1 base, which seems to have the same kernel from my original build to enable ADB, all I added here was the mod to kltespr so CM can update.
Use dd to install these images:
Newest Link 10/4/2014, working ADB and branded as kltespr so CM11 auto updates work:
Working ADB and tagged kltespr so CM11 auto updates work
Same as above but built from version 2.8.0.1 of TWRP
---Below here are all klte with working ADB, but CM11 fails to auto update complaining of wrong device---
Here is the link:
miked63017-openrecovery-twrp.img
Or try to grab it from my drive:
miked63017-openrecovery-twrp.img
Use odin to install this:
miked63017-openrecovery-twrp.tar.md5
Kernel Source Used:
https://github.com/miked63017/SM-G900P_ND2_KERNEL
This file won't download.
ChadH42 said:
This file won't download.
Click to expand...
Click to collapse
Added my google drive URL back to OP
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Excellent. Ty
Sent from my SM-G900P using Tapatalk
miked63017 said:
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
vinman12 said:
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I haven't heard anything back yet, but their test images worked as does the one in OP
Sent from my SM-G900P using xda app-developers app
Sweet thanks
Sent from my SM-G900P using Tapatalk
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
talroot said:
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
Click to expand...
Click to collapse
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
I have used all 3 available customer recoveries (TWRP, CWM, Philz) & I prefer TWRP. So me is easier and fool-proof.
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
sleshepic said:
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
Click to expand...
Click to collapse
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
miked63017 said:
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
My commits up there now wont help with that, I didnt push my defconfig.
You can easily change the compression and logging (less of a size diff) in either the defconfig in .../configs or through
$ menuconfig
prior to build
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
Thanks, I went with TWRP since that's what I'm familiar with.
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
sleshepic said:
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
Click to expand...
Click to collapse
Its a flashable zip. I never use winzip so I'm not sure if it should be able to be extracted with it. I think its technically a 7zip zip file in windows, linux I just run 'unzip $FILENAME'. The google drive link is probably the most reliable, maybe try that one if you haven't already. If there are still problems I can re-upload, just let me know.
Sent from my SM-G900P using XDA Free mobile app
**UPDATE**
I take that back I only uploaded the recovery.img, I flash it with dd after putting it in /sdcard/
Code:
dd if=/sdcard/miked63017-openrecovery-twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Or if you just want to see whats in it, you can extract it like a normal boot.img.
Will try to put up a zip and/or tar tomorrow, honestly I thought they would have had an official one with adb working by now.
Flashify
Just use Flashify to push .img to your phone.
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
vinman12 said:
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Haven't seen this before, what rom are you flashing?
Sent from my SM-G900P using XDA Free mobile app
Team Win Recovery Project for d605
upstream source v2.6.3.0 build
Source
found no bugs in nandroid backup and restore
Only some false translated touch event issues at terminal emulator.
Install: flash the file in CWM:
Download zip file
Give more happiness to your tutorial!
Thanks good man,
We've waited a long time,
CWM is good,but TWRP......
Ty again.......
This is happening omg
Edit: waiting for some feedback before installing, someone PLEASE try installing paranoid android using this
It works good, but not solve Paranoid black screen problem.
Maydar said:
It works good, but not solve Paranoid black screen problem.
Click to expand...
Click to collapse
R.I.P.
Thanks for informations, happy that is working for you. I know, tutorial is a bit short
If you have CWM, then you just backup whole rom, and then youre good. That zip overwrites only recovery partition
RaawrItsTomi said:
This is happening omg
Edit: waiting for some feedback before installing, someone PLEASE try installing paranoid android using this
Click to expand...
Click to collapse
Nice work man! Thanks for this
Sent from my LG-D605 using CM11 V11
Good job, I think it would be great if you gave link to the source code you used to build it in the OP. I think it's required by Original Development section to include the source?
PA
TWPR is working perfectly whit pa
Do you plan to make an update to current version?
I can update it for you if you want. I don't have the device though so I need a good english talker to give me some info about the device.
EDIT: I ported latest TWRP for your device. Need someone who can test it and tell me if it's good. Do not worry worse it can happen is not boot. No hard-brick dangers.
Sorry for long silence everyone, now isnt need for update. So maybe latter or if someone find bugs in my build.
Can I install future builds by Varcain with this? Or I'd have to install the new CWM?
I think that it will work with new builds...
Sent from my LG-D605 using XDA Free mobile app
Does it (TWRP) have Loki integrated like CWM? If no then it won't work - unless you lokify the boot.img inside zip manually. I am switching to new release method and it also depends on recovery being able to Lokify the boot.img when needed.
Thanks, you need to patch that boot.img. I was thinking that every roms would be already patched before compresion.
Sent from my LG-D605 using XDA Free mobile app
I will be thankful for pushing code at github, so we can stay up to date. If you decide to not publish your updates, I can reinvent wheel and make some ugly hack, that do same work in TWRP.
Varcain said:
Does it (TWRP) have Loki integrated like CWM? If no then it won't work - unless you lokify the boot.img inside zip manually. I am switching to new release method and it also depends on recovery being able to Lokify the boot.img when needed.
Click to expand...
Click to collapse
I messed my building tree so badly, that i need start from scratch once more time. I made no changes to twrp source. Only few setting at BoardConfig.mk
but if its required, here it is: http://frame.jailbrake.cz/recovery.zip
Varcain said:
Good job, I think it would be great if you gave link to the source code you used to build it in the OP. I think it's required by Original Development section to include the source?
Click to expand...
Click to collapse
This is a base rom for T330NU /T530 for developers to use with the hassle of rebuilding and messing with updater scripts. This is also for people to restore back to the newest firmware without using Odin whilst keeping root. So users who want a custom rom do not use this! It just contains root with stock firmware and zipped to flash in twrp!
--------------------------------------------------------------------------------------
Features T330NU:
-Odexed
-Prerooted
-Busy box installed
-Bloat ware included so you can delete if you wish
Features T530:
-odexed
-working bootanimaimation
-NOT rooted!
-Lollipop edition
---------------------------------------------------------------------------------------
Bugs:
-No startup bootanimation. Unsure why as many roms I built had none of these issues. Could use some help in this
-First boot takes 5ish minutes. Not really a bug but a feature!
---------------------------------------------------------------------------------------
Future Developers:
To use this as your base, simply give me credit is all I ask. To modify this rom as your own, you can add tweaks to this. Like, replace the kernel... add apks... battery and performance tweaks and the list can go on. Simply use Google for help or make q and a as I won't help here because I'm not a modder, only a themer and bootanimator. I can only help on basic stuff.
----------------------------------------------------------------------------------------
Download T330NU: https://www.androidfilehost.com/?fid=96039337900114781
Size: 1.3 GB
NO MIRRORS PLEASE
Download T530 Lollipop Base: https://www.androidfilehost.com/?fid=23991606952611504
Size 1.1 GB
-------------
HEADS UP
FOR LOLLIPOP, MAKE SURE YOU HAVE AN LOLLIPOP BOOTLOADER. THAT MEANS IF YOU HAVENT ALREADY, FLASH AN LOLLIPOP FIRMWARE FROM SAMSUNG FIRST!
That's it from me. Hope this helped someone.Thanks to g_ding84 and moonbutt74 for updater script help and info.Also Zach for testing and feedback. Also thanks to repey6 for T530 LP testing!
-DUHA
Reserved. Custom rom is in the works also so uhhh stay tuned?
-DUHA
DUHAsianSKILLZ said:
Reserved. Custom rom is in the works also so uhhh stay tuned?
-DUHA
Click to expand...
Click to collapse
Take a look at this Deodexed Stock rom from @MarkusMcNugen
His rom may have the answers you need to fix the boot animation..
He abandoned it a ways back, it boots and its what I'm using right now..
Absolutely no issues
If your looking for Stocked and Superstocked, just google his name and it will take you to his AndroidHost page.. @MarkusMcNugen no longer answers his messages... PMs or on the Forums..
----------------------
Never mind, just saw your post on his thread..
I don't post there anymore because I was getting a tongue lashing when ever I said anything...
Zaphodspeaks said:
Take a look at this Deodexed Stock rom from @MarkusMcNugen
His rom may have the answers you need to fix the boot animation..
He abandoned it a ways back, it boots and its what I'm using right now..
Absolutely no issues
If your looking for Stocked and Superstocked, just google his name and it will take you to his AndroidHost page.. @MarkusMcNugen no longer answers his messages... PMs or on the Forums..
----------------------
Never mind, just saw your post on his thread..
I don't post there anymore because I was getting a tongue lashing when ever I said anything...
Click to expand...
Click to collapse
I will take a look thanks. I am aware of him being inactive (probably has life issues) but that's fine as the rom he made was really good. This is an updated ANK1 base so when ever I start making a custom one, it will be updated to latest build from Samsung (ANK1). I'm not an expert dev so yeah. I will probably add some custom themes if I can remember the stuff for kitkat. When ever you guys get lollipop, I can try to make a black theme if samsung didn't change anything to much. I don't remember posting in his thread... but that's besides the point. Thanks for the info for the bootanimation.
-DUHA
DUHAsianSKILLZ said:
I will take a look thanks. I am aware of him being inactive (probably has life issues) but that's fine as the rom he made was really good. This is an updated ANK1 base so when ever I start making a custom one, it will be updated to latest build from Samsung (ANK1). I'm not an expert dev so yeah. I will probably add some custom themes if I can remember the stuff for kitkat. When ever you guys get lollipop, I can try to make a black theme if samsung didn't change anything to much. I don't remember posting in his thread... but that's besides the point. Thanks for the info for the bootanimation.
-DUHA
Click to expand...
Click to collapse
I'm no where near close to being a n00b..
At this point I am learning a whole lot just by listening to the local chatter and reading, or trying to understand the code..
I feel if I see it enough, it will start to make sense.. I just wish I knew where to start, so I could build on that..
Oh there isn't much difference between the ANCA Base and the ANK1.. Just a few security tweaks..
BTW do you have the Stock ANK1 ROM, oh never mind.. I do have it.. lol
The coding part is for CM/building asop roms to your device. 20+GB of source code along with knowing blobs, commits, git, the list can go on. So yeah I cant even understand any of that ?. Building custom roms for touchwiz just requires knowledge of file structure, and what they do and also the mods you want to add... probably more I forget. Heck even changing apks, debloating is a big improvement for some.
I'll try and rebuild again using something else.
-DUHA
What android version is this rom?
Sent from my SM-T330NU using XDA Free mobile app
SeXyStEpH87 said:
What android version is this rom?
Click to expand...
Click to collapse
4.4.2 KitKat, only the 10.1 Tab 4 models have stock lollipop yet
thisisapoorusernamechoice said:
4.4.2 KitKat, only the 10.1 Tab 4 models have stock lollipop yet
Click to expand...
Click to collapse
Will make some sort of one soon
Sent from my SM-T800 using Tapatalk
Awesome does this rom have kids mode in it as well?
Sent from my SM-T330NU using XDA Free mobile app
SeXyStEpH87 said:
Awesome does this rom have kids mode in it as well?
Sent from my SM-T330NU using XDA Free mobile app
Click to expand...
Click to collapse
lp5.0.2 got kids mode
So this rom doesn't? I have the t330nu model tablet is there a lp 5.0.2 rom for this model??
Sent from my SM-T330NU using XDA Free mobile app
SeXyStEpH87 said:
Awesome does this rom have kids mode in it as well?
Sent from my SM-T330NU using XDA Free mobile app
Click to expand...
Click to collapse
Yes this ROM has Kids Mode..
If you can not find it, I can extract it from my TW ROM and upload it for you...
Awesome gonna give it a try thanks
Sent from my SM-T330NU using XDA Free mobile app
Added Base for T530 (Lollipop). Make sure users have odined the latest firmware in which lollipop Touchwiz requires an LP boot loader. Other than that, boot animation and everything is fixed. Just make sure you flash the T530 base with Moonbutts CWM. Seems to be an issue with twrp. Thanks to @repey6 for testing! Hopefully any dev can make some Touchwiz ROMs and tweaks to it! Thanks guys!
@DUHAsianSKILLZ
Hey,
I want your Some help in porting the Lollipop ROM to other samsung MSM8226 device so
can i use ur ROM as ur base and ur update-Script and Can u connect on the Hangout :silly:
aapav01 said:
@DUHAsianSKILLZ
Hey,
I want your Some help in porting the Lollipop ROM to other samsung MSM8226 device so
can i use ur ROM as ur base and ur update-Script and Can u connect on the Hangout :silly:
Click to expand...
Click to collapse
You can use anything you want from these bases! Just make sure you know what your doing such as the kernel path and such.
Sent from my SM-T800 using Tapatalk
Where do you get the latest firmware? And what is the latest? Do I need to flash the t330nu test then flash t530 base? With the kernel?
Sent from my SM-T330NU using XDA Free mobile app
SeXyStEpH87 said:
Where do you get the latest firmware? And what is the latest? Do I need to flash the t330nu test then flash t530 base? With the kernel?
Sent from my SM-T330NU using XDA Free mobile app
Click to expand...
Click to collapse
I'd suggest you to not flash any of these as they aren't custom ROMs. These were things I extracted and created a flashable zip in twrp so devs can add some tweaks or anysort. Don't even bother flashing T530 as your device IS T330NU.
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
You can use anything you want from these bases! Just make sure you know what your doing such as the kernel path and such.
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
i have patched my stock kernel .. Rite Now it bootlooping on Samsung LOGO