CYANOBIZ - BASED ON GEN9 KERNEL 2.6.37 - A43-A101-A70S2Froyo-HoneyComb - WIP FOR A70S - Gen8 Android Development

BASED ON CM9.1.0 - A70 USERS MUST WAIT A LITTLE THAT I CONFIGURE THE KERNEL (board configuration file)
For A101, just the TS doesn't worked
For A43, it must work, i need a confirmation...
[/COLOR]Image file: https://docs.google.com/file/d/0B1yLsSry4Au8TXdobllMN2pJOUk/edit?usp=sharing
Kernel:https://docs.google.com/file/d/0B1yLsSry4Au8aW8yZVFaSndWVUE/edit?usp=sharing
initramfs:https://docs.google.com/file/d/0B1yLsSry4Au8dHlmWTBSR2J6WUE/edit?usp=sharing
menu.lst:https://docs.google.com/file/d/0B1yLsSry4Au8aVlYbGpKZjRCUVk/edit?usp=sharing
I hope that links works, it's the first time that i use google to share something...
You must have:
-an Archos gen8 A43--A70-A70S2Froyo-A101 OR an A70S2 HoneyComb version (must work perfectly....i hope)
-a little times to report bugs to fix
How install it:
-Copy-paste the image uncompress and the menu.lst files in the root of the INTERNAL sdcard of your tab (SDE menu -> mount card)
-RENAME THE KERNEL LIKE THIS: zImage (to delete .img)
-update the kernel and the initramfs.cpio.gz (SDE Menu)
-COPY AND PASTE A NEW DATA_IMAGE (data_ICS.img like previous version)
-you can install Gapp by copy and paste my Gapp (see my post in dev section about Cyanobiz) in "download" folder in /mnt/storage/
What's news:
-a new kernel based on 2.6.37 from Gen9 (HC device)
-PVR Driver update and dss compopsition activated
-New BT driver
-New Wifi driver (but little pb with it)
-compiled with ics toolchain from archos (optimised for their devices)
DON'T TRY THIS KERNEL WITH ANOTHER FIRMWARE/ROM!!
TO FIX:
-little pb with wifi, it cannot find any wifi
YOU MUST ENTER THE PARAMETERS MANUALLY TO CONNECT YOU TO YOUR WIFI!! (dhcp semi-works)
-DLNA/UPNP CRASH the wifi, don't use it
-USB Sharing - MTP?? (windows XP see something about MTP driver that it cannot install it, but i haven't any seven at home to try....) NEED TESTERS
-SOMETIMES the initramfs doesn't started, black screen after the first "archos" screen, just press 10sec power on to reboot (don't know how fix it, no debug)
-I HAVE OC THE DSP FOR A70S2 (froyo and HC version) to 880, says me if your tab freeze. The CPU is to 1.2GHz, i have no problem
Bizcuite

---

HOW HELP ME TO DEBUG IF ADB DOESN'T WORKED:
You have a file in /mnt/storage/kernellog1.txt
Just share me the file!!
Bizcuite

---

RESERVED FOR FUTURE POST again

---

I need an a70s2 HONEYCOMB Version tester please.
To see if I must change the memory used in my kernel.
If it doesn't worked for them, I must rewrite their board file.
One thing is sure, archos had planned to update our tab with HC, hardware evolution has killed this.
Bizcuite
Sent from my Archos gen8 kernel 2.6.37 using xda app-developers app

---

Tried the new release on my A70S. Tab doesnt boot, it loops on archos screen. It turns on, screen goes black and the archos screen appears again

---

Porobu said:
Tried the new release on my A70S. Tab doesnt boot, it loops on archos screen. It turns on, screen goes black and the archos screen appears again
Click to expand...
Click to collapse
Same tablet same result looping on Archos screen after about 10 sec black screen. Cant get adb to work.

---

1.) Installation after default accomplished. AOS menu was indicated, system is started. First start lasted longer. Presently the touch Screen does not know operated (now reaction, also after restarting I cannot operate the starting screen).
Enclosed the kernellog1.txt file.

---

Mikerla said:
Same tablet same result looping on Archos screen after about 10 sec black screen. Cant get adb to work.
Click to expand...
Click to collapse
mika67 said:
1.) Installation after default accomplished. AOS menu was indicated, system is started. First start lasted longer. Presently the touch Screen does not know operated (now reaction, also after restarting I cannot operate the starting screen).
Enclosed the kernellog1.txt file.
Click to expand...
Click to collapse
OK,
I have seen this in the dmesg share by Mika:
<6>[ 0.310455] platform mpu.0: OPP enabled 1200 MHz
Your tab is OC to 1.2GHz, i will pass to 1GHz to see if it's better.
A101 will have no problem to have an ICS with this kernel, it's a good news.
For A70 i will release another kernel to see if the frequency is the problem.
Wait this evening for another kernel (1.2GHz step will be activated for A70S2 only)
Bizcuite

---

I have tried myself the kernel:
platform mpu.0: OPP enabled 800 MHz
[ 0.305603] platform iva.0: OPP enabled 660 MHz
[ 0.305633] platform mpu.0: OPP enabled 1000 MHz
[ 0.305664] platform iva.0: OPP enabled 800 MHz
[ 0.305694] platform mpu.0: OPP enabled 800 MHz
[ 0.305725] platform iva.0: OPP enabled 660 MHz
[ 0.305755] platform mpu.0: OPP enabled 1000 MHz
[ 0.305786] platform iva.0: OPP enabled 800 MHz
[ 0.305816] a70s2_opp_init: MPU does not support 1200 MHz
Can you try and report of it's better please? A43 can try too.
Just rename it zImage and install with initramfs in the first post.
FOR MIKA:
Can you try to have adb working to have a real debug, your system starts (first starts is normal, all news apps are verify).
when you have adb, just tape adb shell dmesg or dmesg directly if are connected on your tab please?
I will see if it's a pb of file or a problem of driver.
And try with one, and 2 fingers if you have any reaction?
Bizcuite

---

bizcuite said:
FOR MIKA:
Can you try to have adb working to have a real debug, your system starts (first starts is normal, all news apps are verify).
when you have adb, just tape adb shell dmesg or dmesg directly if are connected on your tab please?
I will see if it's a pb of file or a problem of driver.
And try with one, and 2 fingers if you have any reaction?
Bizcuite
Click to expand...
Click to collapse
ok,
the new update starts very fast.
I come up to the starting screen with the lock symbol.
I cannot unblocking however the screen. No reaction to my finger movements (neither with 1/2 of finger).

---

Ok thanks. But have you got adb installed on your computer?
It will be very usefull.
But i think that no ts drivers are installed.
I will modify the board configuration, because many ts has been configured into.
Bizcuite
Sent from my GT-N7100 using xda app-developers app

---

bizcuite said:
Ok thanks. But have you got adb installed on your computer?
It will be very usefull.
Click to expand...
Click to collapse
Excuse for my question.
Which you mean with adb ?

---

mika67 said:
Excuse for my question.
Which you mean with adb ?
Click to expand...
Click to collapse
Android debug bridge, part of android sdk
Sent from my GT-I8160 using xda app-developers app

---

Porobu said:
Android debug bridge, part of android sdk
Click to expand...
Click to collapse
I worked never with adb. Sorry
But, if me explained like I it activate / use someone, no problem.
I will then try it
Edit:
OK,
adb neither on Win 7/Linux computer is installed.
You mean over console on archos access (Google is your friend)
Edit 2:
no, if I attach archos to the computer, I can access not archos(with the new system)
Big problem

---

mika67 said:
I worked never with adb. Sorry
But, if me explained like I it activate / use someone, no problem.
I will then try it
Edit:
OK,
adb neither on Win 7/Linux computer is installed.
You mean over console on archos access (Google is your friend)
Edit 2:
no, if I attach archos to the computer, I can access not archos(with the new system)
Big problem
Click to expand...
Click to collapse
For USB drivers
http://www.archos.com/support/support_tech/updates_adb.html?country=us&lang=en
For how to use it and have adb.exe with dll (command)
http://forum.xda-developers.com/showthread.php?t=1387527
You must open a Windows terminal and go to the path of adb .exe
and tape
adb shell dmesg
if your adb is correctly configured, you must have a debug (don't forget to connect the tab )
Porobu said:
Android debug bridge, part of android sdk
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
EDIT: Huum memory model is not good for A70.
A70 USERS MUST WAIT A LITTLE, BECAUSE THEIR BOARD CONFIGURATION FILE IN THE KERNEL IS NOT COMPLETED.
I will try another thing
Bizcuite

---

bizcuite said:
For USB drivers
http://www.archos.com/support/support_tech/updates_adb.html?country=us&lang=en
For how to use it and have adb.exe with dll (command)
http://forum.xda-developers.com/showthread.php?t=1387527
You must open a Windows terminal and go to the path of adb .exe
and tape
adb shell dmesg
if your adb is correctly configured, you must have a debug (don't forget to connect the tab )
[/B]
Bizcuite
Click to expand...
Click to collapse
many thanks,
but i have a Problem "device not found".
I will tomorrow evening again try it
Good night

---

FOR A70 USERS:
Can you try this kernel, I have completed the board configuration and i hope that it boots now. I cannot try it!!
I NEED TESTER FOR A70S
FOR A101, i have added tr16c0 touchscreen controler in board config file from A101XS (who use 3 differents TS and one is yours) :
Bizcuite

---

sorry Biz still same loops on Archos boot screen then 10 sec of black. Not sure if this helps but I leave the usb cord hooked up and windows 7 tries to install driver and fails.

---

Mikerla said:
sorry Biz still same loops on Archos boot screen then 10 sec of black. Not sure if this helps but I leave the usb cord hooked up and windows 7 tries to install driver and fails.
Click to expand...
Click to collapse
Can you try the next one please?
I had forgotten to apply the archos fixup
Maybe it will be ok.
My work for A70S is based on Letama port. It must work with his configuration.
Bizcuite

---

same result