Can't Flash any Rom - Vibrant Q&A, Help & Troubleshooting

Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance

---

This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click

---

seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though

---

elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.

---

firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks

---

firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly

---

elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990

---

firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway

---

elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2

---

iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:

---

elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2

---

Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app