Car Dock - Sony Xperia Z Ultra

I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?

omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1

Here are pics
Sent from my C6833 using xda app-developers app

So you have to put a plate on front and back of your case?
I don't use a case currently. I'm assuming I could just stick one of these pads to the back of the phone?
Are they really secure going over big bumps and stuff like that?

Yeah I put plates on the case because I didn't want to stick anything to the phone. It would obviously be lighter without a case, and thus hold better if you stuck it to the phone. It's been really secure over bumps and at high speeds. Held perfectly during a 7 hr drive last week.

I am using this one.
http://www.ebay.de/itm/281172219396?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
It's the only customfit car holder for the Ultra I could find. When in the car I remove my Ultra from the Nillkin case and put it in the holder. I use it for navigation quite a lot and I hate it when the phone is loose in the car holder which is the case with most universal clamp style holders.

I have the InfiniApps Slyde CD Slot Mount also. Best phone mount ever. CD players are usually in the best location for viewing. I had cup, dash mounts, they were terrible. I used the sticky metal plate and attached it to the back of a case. Also magnetic attachment makes for quick removal of the phone when you want to check a message etc...

omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
Hi can you post some pics of it...???

This is the one I got. Worked pretty good until the Z Ultra..
http://www.mountek.com/dp/B004G1L52Q

Cool these look good. Just found another one which is cheaper than the others $12.99 + $2.99 delivery. Looks like it does the same thing and will also fit the Z Ultra (checked the dimensions). Link
Is there any risk that the CD slot ones will damage the CD player? Is the slot strong enough to handle the weight of the Xperia Z Ultra?

I've been using PuGoo sticky pads for a good year or two now to mount whatever smartphone I'm using. It's very handy.
http://www.amazon.com/gp/product/B00F68G58M/ref=olp_product_details?ie=UTF8&me=&seller=
You do need a good spot for it though, which luckily my xB has.

omniphil said:
...., but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.

abuihsan said:
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
Click to expand...
Click to collapse
I already have this car holder and it works fine. It keeps the phone firmly in place and it is easy to put in and take out.

cholepuree1 said:
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Click to expand...
Click to collapse
Does it stay in place while driving and when hitting potholes or bumps?

It does hold very strong, I just got one of these. I hate cases on my phone but I put one on so I could attach the metal plate to the inside of the case. It has never fallen off on even the biggest bumps.
I am still deciding if I want to just stick the plate to the back of my phone... I wonder how easy it is to get the adhesive off the back glass if I ever wanted to remove it...

Yes is holds really well. Just had a 6hr drive this morning!
Edit: Here is a picture of how it looks while driving.
Sent from my C6833 using xda app-developers app

Just wanted to say that I just bought this:
Scosche stuckUP
Its early to tell but the quality feels solid compared to the many ebay cheapo one that end up breaking in no time.
The whole things just feel quality..and for the price it better! lol
Several ways to use it...I went with Windshield for now. Holds the phone very tightly and during the trip its very stable.
Also, I did not even have to remove the flip case I have which makes it seem a lot bulkier so I feel it will do great with either the CP12 or any of those battery/case combinations.
Happy to finally have my phone up there even if it blocks most of my view! LOL

I have come to the conclusion that a universal mount for a small tablet is the ideal car mount, so I have been looking at ebay for ones designed for the Nexus 7, Memopad 7 and Samsung Tab 7, and then checking that they can be adjusted small enough for the XZU.
this one in particular looks appropriate:
http://www.ebay.co.uk/itm/160672229905?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
it's a little bit more expensive than I'd expect for a simple product, but I've not seen a similar unit.

The one I bought above works excellent, it is for phones but depends on what you like.
I am very happy with the quality compared to all the crap I bought before lol

I have one of the Imagnet mounts in my F350 I used with another phone. I checked the Z Ultra and it sticks to it without needing the metal plate attached to the back of the phone. Right under the camera area inside the phone is enough metal that the magnet works fine. I have driven with it in that bouncy old truck and it does not come off or move around at all. The only bad thing is the metal is not centered so the phone only sits in portrait orientation. But it beats having to stick a metal plate to the back of the phone.
I like it because I am in and out a lot through the day and it is quick and easy to just toss the phone onto the magnet then just grab it off there when I need it. I have not tried it with a power cable attached but most likely it will just make it tilt over a bit depending on how much the power cable hangs down I guess. With the battery life of this phone it has not been something I have needed compared to the Mega 6.3 that would go dead much quicker streaming slacker radio over bluetooth than this beast of a phone. Most likely the charger cable would have to be supported in some way to keep it from making the phone lean to one side.

Related

Car mount

http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?

Car phone holder - one that works quite well

I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.

Car dock with Spigen cover?

Can anybody recommend a car dock that won't require removal of the Spigen cover?
I saw the Mumbi dock which appears to be alright, but I'm not sure it'd work with the cover.
(http://www.amazon.de/mumbi-Lüftungs...95452&sr=8-4&keywords=xperia+z2+autohalterung)
omernevo said:
Can anybody recommend a car dock that won't require removal of the Spigen cover?
I saw the Mumbi dock which appears to be alright, but I'm not sure it'd work with the cover.
(http://www.amazon.de/mumbi-Lüftungs...95452&sr=8-4&keywords=xperia+z2+autohalterung)
Click to expand...
Click to collapse
The Arkon Intelligrip. Just got it myself after searching endlessly for something that would hold the phone, without pushing buttons or require an awkward position in the mount (i.e. off-center). Finally found this one that holds the phone by the ends rather than the sides! Perfect. I used an Xacto knife and a Dremmel to create an opening in the Spigen Ultra Clear Hybrid case for the magnetic port and then bought some of the cheap aluminum magnetic cables mentioned in an other post on here. So far, it's working great. The mount comes with long and short arms to accommodate everything from a small to extremely large phone. I used one set of short and one set of long arms and the tension seems perfect. Bonus, there is an NFC sticker built in to the mount so I have my phone set to unlock and launch the Sony Car interface when it goes in the mount! (But I would have done that anyway by just sticking an NFC sticker to whatever mount I ended up getting.) It was also cheap! Like $15!!!

Magnetic Car Mount - Mountek nGroove Snap 3

Has anyone tried a magnetic car mount with their nexus 6? Specifically the Mountek nGroove Snap 3 - http://www.amazon.com/Mountek-nGroo...ablets/dp/B00MNXAFQ6/ref=cm_cr_pr_product_top
I used a magnetic mount with my Nexus 5 and loved it. I'm wondering how hard it would be to bend the magnet to work on the n6. Any input would be greatly appreciated!
I lost all hope using a magnetic dock with my N6..
If anyone got it to work do share..
EnterLordVader said:
I lost all hope using a magnetic dock with my N6..
If anyone got it to work do share..
Click to expand...
Click to collapse
I just ordered one, should be here Wednesday. I'll be sure to report back!
Yeah just ordered one today also, can't go wrong with the current price. If it doesn't work will just sell/give it away on craigslist/friends.
Tried it with my old magnet mount, it holds ok with a case on holding the metal back plate between the case and the phone. But doesn't hold firm enough for me to chance it with the phone. But then again it's some generic magnet mount, not a mountek.
I just ordered this yesterday after returning the standard CD mount that uses clamps. The clamps were interfering with the buttons way to much, and I didn't like how off centered the weight was when clamping the phone on the bottom portion of the phone. This is definitely a fail in button placement for this application. Hopefully the magnetic mount will be stellar!
Hi, i just bought it as well, i also ordered these. http://smile.amazon.com/gp/product/B007F0QRYG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
If the magnet that comes with it can't bend or wont work well with the 6, maybe these little flexible magnets will work. I report back today when they arrive to see if they work well
the green man said:
Has anyone tried a magnetic car mount with their nexus 6? Specifically the Mountek nGroove Snap 3 - http://www.amazon.com/Mountek-nGroo...ablets/dp/B00MNXAFQ6/ref=cm_cr_pr_product_top
I used a magnetic mount with my Nexus 5 and loved it. I'm wondering how hard it would be to bend the magnet to work on the n6. Any input would be greatly appreciated!
Click to expand...
Click to collapse
That mount looks like a disaster.... I can't post links, but type into amazon "maggrip car mount" and get that one. It's a lot neater
Metal
Not that easy to apply, looks nice. Camera piece to fake for my liking. Feels good, little sharp on the bottom side of edges when holding.
Just tested nGroove 3 with the caseology TPU case and it worked great! Phone locked on and was very secure.
However, I like showing off the nexus logo on the back and don't know if I want to keep the caseology TPU case (using the spigen ultra hybrid currently)... Does anyone have any recommendations on how to place these magnets/plates and show off the nexus logo? I could probably use the Rinke max and put the magents on the both sides of the logo but the case may be too thick.
I was also thinking about sticking some magnets/plates behind the back cover.. does anyone know if there is a warranty seal for the back cover? I looked at the teardown but didn't see anything about the warranty seal.
OP - Just received this mount from Amazon yesterday, and I have to say it's worth it! I have a Nissan Titan and the CD slot is in the perfect spot for a mount like this I also like that the mount doesn't grip the side of the phone and press up against the buttons. I bought it from the Amazon warehouse for $15 and the unit I received looked new. You do have to tighten down the CD slot insert to endure the phone doesn't sag when you place it on the bracket, but once its tight, the phone holds steady and secure on the magnetic steel plate.
@born_fisherman what case are you using?
the green man said:
@born_fisherman what case are you using?
Click to expand...
Click to collapse
Tudia TPU slim case. The steel plate for the magnet fits nice behind the phone with the case on
born_fisherman said:
OP - Just received this mount from Amazon yesterday, and I have to say it's worth it! I have a Nissan Titan and the CD slot is in the perfect spot for a mount like this I also like that the mount doesn't grip the side of the phone and press up against the buttons. I bought it from the Amazon warehouse for $15 and the unit I received looked new. You do have to tighten down the CD slot insert to endure the phone doesn't sag when you place it on the bracket, but once its tight, the phone holds steady and secure on the magnetic steel plate.
Click to expand...
Click to collapse
born_fisherman said:
Tudia TPU slim case. The steel plate for the magnet fits nice behind the phone with the case on
Click to expand...
Click to collapse
How do you like the case? I'm thinking about picking one up.
the green man said:
How do you like the case? I'm thinking about picking one up.
Click to expand...
Click to collapse
The case is nice. I've used Tudia for a few phones now, and never have an issue with build quality. They fit perfect and keep the phone slim.
Pithism said:
Hi, i just bought it as well, i also ordered these. [new user - link removed :-/]
If the magnet that comes with it can't bend or wont work well with the 6, maybe these little flexible magnets will work. I report back today when they arrive to see if they work well
Click to expand...
Click to collapse
Very interested in seeing how this worked. Any updates?
Works great.
I put the large tablet size piece that came with the stand in a case and the magnet does have some flexibility to it so it fits well in the slight curve of a N6 case.
The connection is strong and holds up going through bumps etc.
Worth the buy
I assume that if your using a magnetic holder with a steel plate attached to your phone or case, that you are not using a Qi charger. Wouldn't the steel plate would heat up when using wireless charging? I had some problems with my N5 with overheating if my phone was not in the correct place on my Qi charger, the metal in the phone used to attach the N5 to the official nexus charger would get hot.
atcjeff said:
I assume that if your using a magnetic holder with a steel plate attached to your phone or case, that you are not using a Qi charger. Wouldn't the steel plate would heat up when using wireless charging? I had some problems with my N5 with overheating if my phone was not in the correct place on my Qi charger, the metal in the phone used to attach the N5 to the official nexus charger would get hot.
Click to expand...
Click to collapse
I've been trying various magnet mounts and qi chargers hoping to find the right combination of the two. Unfortunately, in order to avoid blocking the qi coil you end up moving the magnet mount further up the back of the phone almost near the bottom of the "M" dimple. Placing a strong magnet near that part of the phone will trigger the screen shutting off "smart cover" style (coming back on again as soon you remove the magnet). I'm beginning to suspect that in order to really get everything (qi, nfc, magnet mount, with the screen on) working together right might require building something a bit more customized.
I personally am also using the mountek snap 3 mount and I have had no issues after affixing the tablet sized metal plate about 2/3 of the way down, ive ordered some extra magnets to improve the hold on the device so i dont have to worry about precisely placing the device on the Mount

Car Mount/Holder

As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
For the life of me I can't find the brand name but it expands in the cup holder has a flexible gooseneck and a holder that tilts at different angles. It is adjustable for most phones width. I found it on eBay a long time ago
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
With my Note 4, I very happily used iMagnet. With my S7, it didn't occur to me that it doesn't go so well aesthetically with a clear-backed case like the Otterbox Symmetry Clear. I'll probably get an inexpensive case to keep and use in the car.
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Corwinder said:
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Click to expand...
Click to collapse
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
RebDovid said:
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
Click to expand...
Click to collapse
That's when you bite the bullet and remove the paper backing covering the adhesive and make it stick in place. To tell you the truth, I've never done that either. I've always used the adhesive thus my need to order more steel plates today.
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
It would help if you would specify what function would you like it to serve....ie (wireless charging, magnetic, windshield mount, CD mount, vent mount (etc), one handed operation....
I use mine as a phone holder and dash cam. Wireless charging in the car is not important to me right now. Here is the combo that I currently use and it works well...
http://www.amazon.com/Mobie-Grips-M...&redirect=true&ref_=oh_aui_detailpage_o08_s00
http://www.amazon.com/Universal-Qun...&redirect=true&ref_=oh_aui_detailpage_o07_s00
http://www.amazon.com/TomTom-GPS-Da...&redirect=true&ref_=oh_aui_detailpage_o09_s00
I use the base from the second link with the actual phone holder from the first link (universal ball joint) and have it suction cupped to to the item in the third link. It sits perfectly on my dash and works very well in my vehicle. It is secure, easy to put the phone in and out of, and provides me with easy access to the phone as well as all of the functions I wanted to accomplish with it.
Of course, you can just keep it simple and use the item in the first link and just suction cup it to the windshield...that's up to your needs and vehicle.

Categories

Resources