[Q] Autosyncing folders upon USB connection - Android Q&A, Help & Troubleshooting

Hey.
I've recently switched from a Goclever a971 tablet to an Asus memo pad fhd 10 lte. On the former one I had set up a auto sync upon connecting the tablet to the pc with the use of Good Sync. The tablet and SD card were shown as seperate flash drives. Now, in the latter the whole tablet is shown as one multimedia device. I tried looking for an option to connect as USB storage, but I only found Multimedia device (MTP) and Camera (PTP).
I've got Android 4.1.2 running. Any ideas?
Thanks in advance.

Related

[Q] Transferring Between Android Devices

Hi, I'm going on vacation soon and since my tablet (10.1) has only a limited amount of space, I was wondering if there is a quick and easy way to transfer files (movies and tv shows, ~700mbs) from my android phone (s3) to the tablet, without the use of the internet, as I might not have any internet connect and I wont be bringing my laptop. Thanks for the help.
wifi direct in the settings menu or try an app called airdroid if you have a wifi router. Using the browser you can via wifi download and upload files
Sent from my GT-P7500 using xda app-developers app
Or get a USB OTG dongle (if your phone supports mass storage).
It can be quite slow, but I've used bluetooth to transfer files as large as 180MB between my phone and galaxy tab before. You could try packaging your files in a zip (use es file explorer or something similar) and then transferring with bluetooth (keep in mind, it can take around 10 mins to copy ~200MB).
Wifi file sender. Make one device a wifi hotspot. Then connect the other and run the app on both devices. You'll know what to do...
Sent from my cm7 - powered Nokia 3210
H2O37 said:
Hi, I'm going on vacation soon and since my tablet (10.1) has only a limited amount of space, I was wondering if there is a quick and easy way to transfer files (movies and tv shows, ~700mbs) from my android phone (s3) to the tablet, without the use of the internet, as I might not have any internet connect and I wont be bringing my laptop. Thanks for the help.
Click to expand...
Click to collapse
I find myself in this situation because I travel pretty frequently abroad and for stays shorter than a month I bring with me only my smartphone (Galaxy Note) and my tablet (G.Tab 10.1" 3G) and there are tons of options:
- Wi-Fi direct. it's built-in in both the G.Tab and the S3 and you don't need internet, routers or cables and it's pretty fast, it's probably the best option for what you need
- free apps like Airdrop or Samsung Kies Air or (the one I use most because has both a browser-based files transfer and an FTP server, I have the paid version) Remote Web Desktop (for these you need a router though)
- an USB OTG adaptor for the G.Tab (AFAIK there is only the original Samsung one) and then connect the S3 as "mass storage device" (check in the settings, on my Note it's under "Wireless and networks"-->"USB settings"-->"Connect as mass storage device". you can also use an USB flash drive to store your movies or even a PC hard disk if it's in a powered external case
- the SD memory card reader adaptor from Samsung. same as the USB adaptor except you connect to it SD cards or microSD cards in an SD size adaptor. you can for example connect to the G.Tab the microSD card from your S3 (since you seem to store whole movies on your S3 I assume you are using also removable memory in it)
- Bluetooth (exactly like Wi-Fi direct except it's way slower)
I personally use all of the above methods, it all depends on what you have to transfer. Apps like Airdroid, Kies Air and Remote Web Desktop I use mainly at home with my PC (I hate using cables so rarely use the Note's and the G.Tab's USB cables with the PC), between my tablet and smartphone for small and few files I use Bluetooth, for big but few files I use Wi-Fi direct, for many files of whatever size I use both the USB OTG and SD card reader adaptors from Samsung (at the time I bought the G.Tab they were sold together with a small discount and they are both useful in slightly different ways).
xdapao3 said:
- an USB OTG adaptor for the G.Tab (AFAIK there is only the original Samsung one) and then connect the S3 as "mass storage device" (check in the settings, on my Note it's under "Wireless and networks"-->"USB settings"-->"Connect as mass storage device". you can also use an USB flash drive to store your movies or even a PC hard disk if it's in a powered external case
Click to expand...
Click to collapse
I reckon this is your best bet, especially for speed.
I bought my USB connector for my Tab 10.1 for around £3 off eBay and also the USB connector for my S2 for around £2 from the same place (3 cheers for the 'Bay' ). Easy as pie and is a great help when travelling...
I've bought TWO (one at home other at office) of this:
http://www.ebay.co.uk/itm/USB-Conne...uting_CablesConnectors_RL&hash=item20c67757be
Perfect!!!
Plus with the cheapest(smaller) card reader :
http://www.ebay.co.uk/itm/USB-All-I...Readers_RL&hash=item2eb13e7e1e#ht_2399wt_1187
Just think the tablet could bring this interface on stock, but works just fine.
I personally use WiFi Direct for big files like that, not really tried folders or multiple files (I'll give out a go tonight though) but of tone not tried that feature, you should, it's one of those features that I think should be highlighted more by Samsung in my opinion.
Sent from my GT-N7000 using Tapatalk 2
RavenY2K3 said:
it's one of those features that I think should be highlighted more by Samsung in my opinion.
Click to expand...
Click to collapse
I think people should RTFM!! :laugh:
Questions go in the Q&A section

Auxtek Android stick mini-pc (ROOT)

Hello, everyone.
OK, I finally got time to test the Android stick mini PC that I bought in Shenzhen, Guangdong Province, China
The device is model T-001, by AuxTek (I dont think it's a registered brand name).
MODEL: T0001
System = Android 4.1.1
CPU - RK3066 Dual CPU
2GB DDR3 RAM (actual available 1.45GB)
Internal 8GB memory (actual available 4.83GB)
WIFI capable
BLUETOOTH capable
HDMI-VIDEO OUTPUT
2.4GB Wireless Mouse _ Keyboard (It's actually like holding a LASER POINTER to point and click the APPs on the screen).
*See the attachment photos about the packing and the accessories.
OK, the HDMI connecting cable is loosen, so if I move the mini pc, the screen may black out.
and also, I dont trust the quality of the power supply (5V-2A).
I bought the HDMI adaptor and a new power supply for it (one may also use a Google Nexus 7 or iPad charger for it).
*Next post about the first thing that I do on the device...ROOTING it! (it is a must have software/app)
OK, Part 2.
About ROOTING the device.
I use "Tencent Mobile Manager"
(see photo below for download the software, and install it on the PC).
Note:
(1) In order to communicate with the PC, one can connect the mini pc to the PC by USB cable using the OTG port.
*This does not make the mini pc as a "storage device" on the PC. It simply can communicate with the Tencent Mobile Manager only!
(2) According to the instruction menu, in order to become a "storage device" when connecting to the PC, one must connect the mini pc to the home PC by using the USB port that
connects the Remote Control/Keyboard *the bottom USB port.
*However, the package does not have this cable. So I have not tried out this function yet!
(3) According to the instruction menu, there is a reset button on the left side of the mini pc. Pressing it with a pin is supposed to go to recover menu. But I have not tried this yet!
OK, after the home PC has installed Tencent Mobile Manager, it will automatically find the mini pc and a menu will pop up.
>Click the one-click manager button, and it will ROOT and manage the device to best performance (such as cleaning caches and unwanted files) *optimization!
When Rooting the mini pc, it also will install the Tencent Mobile Management app in the mini pc.
**after the success ROOT, you can click this app and learn that the phone is ROOT!!
Also, I installed "Titanium BackUp" and "Root File Manager" to test the device if it is ROOT. and It is!!!
This Tencent Mobile Manager is a must have program (and app) on the PC and the mini pc for communication and manage the device.
>It can manage the files within the device (between internal memory and the SD card) easily!
>It helps to scan all downloads and access files during the use of the mini pc! (and it optimize the device).
>It has its own app market function (that's including finding the Adobe Flash apk!)
>It has its own movie market to download full movie files into the device!!
OK, turning on the device, and first go to "About the device" to check the firmware and hardware version/software version.
*see the attachment photo in the last post.
The device is displayed just like any other Android device.
The bottom menu bar reads
(1) Go back
(2) Home menu
(3) Apps that are opened and are running in the background
(4) "Screenshot"
(5) Volume down
(6) Volume up
And this is Android 4.1.1
So, when one pull the bottom menu bar up, it opens the Google Search menu!
OK, you can check the attachment photos to see what apps I have installed and run in this mini pc.
Basically, it is used as an entertainment center for my parents. They can watch all the Chinese TV dramas and movies,
and access all China cable TV networks from this thing!
**The test is done on my Panasonic 50" plasma TV. So I think if it works on a large screen TV, anything that's less than 50" should be ok.
**The device is set at 720P by default, The wholesaler suggests to me to keep it at 720P even the 1080P option is available in the HDMI output setting. So I have not changed this.
**The device is in good temperature during the usage time (watching steaming movies from networks in China for awhile).
**I have also used a 2GB SD card to store music, movie (American Horror Story Season 1), and photos. and they all works out fine!
(The mini pc supports 32GB SD card)
The device has an app called "explorers", which is to access and edit the files inside the device.
>The device can use OTG port to connect an "USB memory stick" if a SD card is not present.
**can only choose to use either a SD card (via SD Cad slot) or a USB memory stick (via OTG port). CANNOT USE BOTH AT THE SAME TIME!
First, I have to install a chinese input keyboard (CedIME app) so that I can type chinese on the mini pc during search and internet browsing.
>The wholesale tells me there wont be any firmware updates in the future. But I have tested the System Update and it's running anyway. haha.
*dont know if I should try to flash the ROM myself in the future, as I have no idea which one supports this mini pc. haha.
OK, I have tested many available online video apps, and this one is really good.
*have very new movie and TV episodes available!!
*the steaming is very smooth, not much lag. (my wi-fi connection signal is already just fair)
In the end, I tested it with a Japanese pervert superman movie "Hentai Kamen"
CONCLUSION:
Pros:
(1)The operating temperature is good. Just mild warm.
(2)Speed is good. The remote control pointer sometimes lag, but overall ok. It needs just few minutes to get used to it.
(3)The Remote Control with Keyboard is a must have device to go with this mini pc!
(4)At 720P, it is already very good graphic quality in a good balance between "visual quality" and "smooth steaming"
(5)Tiny device, easy to fit just next to the TV.
(6)ROOTing this mini pc is necessary, and the Tencent Mobile Manager is a recommended companion to go with it! Really useful!!
Cons:
(1)Some apps that are installed via apk file or other non-Play Store download, it has to be uninstalled through "Settings->Apps".
And after every uninstall, it will reboot the device. And after every reboot, the Wi-Fi has to be turn OFF and then turn ON to search the
Wi-Fi connection correctly again!!
(2)The USB cable, HDMI cable, and the Power charger (5V-2A) are below average quality.
*I changed them to use my own HDMI adaptor, my own HDMI cable, and my own USB cables (Nokia and Sony), and my own Power Charger.
(3)The package does not come with the USB cable that connect the mini pc to Home PC as an externam storage device. I have to buy a new cable to test this function (which I have not done).
oh, the size of it, in comparing to a Nokia 920
I know this thread is old,
I have an auxtek T004, allwinner A10s cpu running android.
I wonder if is there a way to run OpenElec on it, as Xbmc/Kodi is not booting (crashes after "preparing for first boot").
Thanks in advance.

Can't transfer videos to Nexus 9 over USB

Hi there,
My mother is an international airline pilot and downloads a lot of TV shows and movies to watch on her 2-3 hour breaks on her tablet. She had an Asus Transformer Prime which worked well, but it just crapped out. We got her a Nexus 9, but now when we connect it via USB, it doesn't seem to be able to transfer videos from her computer (all Windows 8.1).
We open the video's folder and the tablet's Movies folder, and when we drag the movie file onto the tablet it just displays a (/) no symbol over the cursor. Pictures transfer just fine.
So what's up with that?? Something's gotta be wrong, I know this is possible to do. We did it with her old tablet and I do it with my Nexus 7 and my phone all the time.
Any help is greatly appreciated.
Thanks!
-David
Have you tried rebooting (the tablet) and reinstalling drivers (on Windows 8.1)? If not please do and make sure your connection is on a USB 2.0 port. Let me know if your problem is solved/unsolved.
Sent from my Nexus 9 using XDA Free mobile app
AirDroid is the way to go, awesome app. I had the same problem with my Nexus but gave up in the end. But AirDroid is so much easier.
Yes, if you are using a USB3.0 connector on your computer, switch to a USB2.0 connector. Also, try resetting the MTP connection by going to "Settings->Storage->USB Computer Connection" and toggling the MTP check box while the cable is plugged in.
Also do the same with "Settings->Developer Options->USB Debugging".
You may also want to follow this thread. Someone else is also having MTP troubles with win8.1
http://forum.xda-developers.com/showthread.php?p=58630834
Sent from my Nexus 9

[Q] Import camera media via USB OTG

One of the reasons I got a tablet was so I could transfer my photos from my DSLR Nikon D60 via USB OTG so that I could appreciate them on such a bigger and better display without having to lug around something bully like a laptop.
I was very frustrated when I found out just today that the Sony Xperia Z3TC does not play nice with my camera. Using Nexus Media Importer, troubleshooting tells me that the tablet can't open files from the Nikon D60 (on the flip side, the tablet can at least tell what's trying to communicate with it). Besides Nexus Media Importer, I've tried installing other apps like Stickmount and camera importing apps (eg. RawVision, Rawpal Gallery, RawDroid, and DslrDashboard). None of them work. I'm running on a prerooted stock Sony Lollipop firmware.
My current work around is: importing my photos from the camera to my Nexus 5 (using the stock media importer which pops up as soon as the camera is connected via USB OTG) then transferring them to the tablet using SuperBeam. I hate having to need to do this before I can appreciate them on the Z3TC.. anybody have a solution to this? ?
EDIT: The problem is not that USB OTG does not work, but that the tablet is unable to read the files of a connected device if it is set up to connect as an MTP device and not USB Mass Storage. I want it to work as an MTP device like it does on my Nexus 5.
Hi,
I'm on the same boat as you. I bought this tablet as I was tired of not being able to directly import photos from my DSLR on my older LG G Pad 8.3, and since I know my HTC M8 using almost the same Qualcomm SoC supports USB Host OTG I was pretty sure this tablet also would. However that does not seem to be possible with current roms or kernels. I flashed CM12 in hope of fixing it, with no success I'm afraid.
USB OTG itself works (at least on stock ROM), although MTP does not seem to work. Can you maybe tell your camera to use USB Mass Storage mode?
sandrap said:
USB OTG itself works (at least on stock ROM), although MTP does not seem to work. Can you maybe tell your camera to use USB Mass Storage mode?
Click to expand...
Click to collapse
This seems to be the root of the problem. I don't know if it's the same on KitKat, but the Z3TC cannot seem to run/read accessory devices via MTP on Lollipop. The tablet can read them only if they are set to connect as USB Mass Storage. My old DSLR does not have the option to choose how it is recognized, so no. This is very upsetting.
I have to connect it to my Nexus 5 (because it works as MTP) then transfer them to the tablet, which totally defeated the purpose of me spending money on this in the first place. Is there no way to make MTP work at all?? :crying:
Update:
I just found out today that the stock Android Media Importer does indeed work in Sony's stock Android 4.4.4 KitKat ROM, as I decided to revert from CyanogenMod 12.1. Trying to get back to stock Lollipop and see if it still works. Will update again soon.
Update2: Yep, Sony really messed something up in their Lollipop update. Reading MTP devices via USB-OTG doesn't work. Guess I'll be sticking to KitKat -_-
Ren Hayashi said:
Update:
I just found out today that the stock Android Media Importer does indeed work in Sony's stock Android 4.4.4 KitKat ROM, as I decided to revert from CyanogenMod 12.1. Trying to get back to stock Lollipop and see if it still works. Will update again soon.
Update2: Yep, Sony really messed something up in their Lollipop update. Reading MTP devices via USB-OTG doesn't work. Guess I'll be sticking to KitKat -_-
Click to expand...
Click to collapse
How About you buy the smallest card reader you can find? I think it's a better solution since you can move around (without the risk of dragging the dslr and falling) comfortably if like you want to show your snaps.
Sent from my SGP621 using XDA Free mobile app
This can be done easily if you have a computer along with you. You can:
1. Directly connect the camera and computer via the cable that came with the camera.
2. View the camera's DCIM folder on your computer.
3. Copy and save the photos on your computer.
4. Copy photos from computer to Android phone or tablet directly.
Here the full tutorial to copy camera photos directly to your Android with OTG:
Step 1. The USB Connection
To start with, directly connect your android phone to the OTG. Then, plug in your camera to the OTG with USB cable came with your camera.
When you connect your camera (make sure it's on!) to your phone, a little USB symbol should show up at the top of the screen.
Step 2. The App
Download CR2-Thumbnailer from Play Store. Then install the app on your Android phone. (If you have a Nikon DSLR, see the NEF-Thumbnailer.)
tep 3. Transfer Photos from Camera to Android
Press the blue camera icon on your phone and navigate down to the folder containing all your images. You can view the thumbnail by default. If you tap an image, it will be open in full screen.
After selecting a few photos, tap the menu button. In the pop-up window, you can either choose "Save" to extract the jpeg and saving it to the phone or select "Backup" to copy all the raw file to your Android phone.
Now, you can view photos on your Android device and share them on social networks immediately. The USB OTG Stick could be very handy while travelling.
More than a way to send photos from digital camera to iPhone, a USB OTG stick can be used to transfer files between smartphones. Just have a try!
For more help check Nikon d60 Manual.

[Q] Android Media PC - Windows accessible share?

I recently bought a Android PC that act as a Media Center, I plan to connect a 3TB hard drive to it and use the Android PC to play all the files on the TV. The Android PC is network capable, so I was wondering is there a way to "share" the external USB on the network so I can update the contents with new episodes / shows?
I currently have TVersity sharing the drive over a network, which is also accessible from any Windows PC and I want to replicate this ability with the Android PC - any ideas?
Some info:
3TB Seagate Hard drive - not network enabled
Android PC running 4.2.2 - Wired connection although Wireless is possible
All PCs running Windows 8.1 Pro

Categories

Resources