Hello every body :
I have a problem with my samsung galaxy mini 2 GT-S6500D ,
Firstly I have installed jellybean 4.2.2 custom rom , but I found some problem with it ( like white screen ) .
So I decided to flash back the official stock firmware 2.3.6 by odin ( I do that without entering recovery mode and wipe cache/data ) problem arise and I got the following :
1- My phone stucks at the samsung logo screen and reboots till I remove the battery to stop rebooting . I tried to reinstall the stock firmware again but still no solution .
2- I cannot get into recovery mode to wipe cache and factory reset , When I press the keys volume up + volume down + home key + power key , phone won`t start and thus no recovery mode menu .
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
ANY SOLUTION ,,,,, PLEASE HELP ????
regards
drali8888 said:
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
Click to expand...
Click to collapse
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
after odin flash reboot in stockrecovery and do a factory reset,reboot.
drali8888 said:
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
Click to expand...
Click to collapse
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
-CALIBAN666- said:
after odin flash reboot in stockrecovery and do a factory reset,reboot.
Click to expand...
Click to collapse
I CANNOT get into recovery mode either stockrecovery or custom !
xsenman said:
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
drali8888 said:
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
Click to expand...
Click to collapse
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
Thanks man for your replies >> the problem was solved
I was butting my phone on usb cable it showed charging icon at this time i pressed the bottoms volume up + down + home + power it restarted in custom recovery mode , fortunately FINALLY i am in recovery mode :good::victory: then i did cache wipe and factory reset and my phone boot normally without problem
Related
Hello all,
I have an issue with my Samsung Galaxy Ace GT-5830i that is stuck in Android system recovery (3e) mode, and it seems there is no way to get it out of there.
- upon selecting wipe data/factory reset the device is stuck with one message "multicsc: src /system/csc/MTL/system/ ." and "Formatting /data..." bellow
- upon selecting apply zip from the SD card the installation always fails with various error messages (I tried to install cyanogen mod rom in an attempt to recover, but failed as well)
- upon selecting reboot now the whole screen disappears with only the "multicsc: src /system/csc/MTL/system/ ." message at the bottom of the screen and I need to remove the battery.
I will greatly appreciate if anyone on this forum could help with the issue, as I have search for possible solutions without any luck so far, and my phone appears to be bricked.
Thank you,
John
My guess is u still on stock recovery. Flashing cm rom or any other custom rom needs clockworkmod recovery, moroever theres no cm rom for s5830i yet.
For now u could try to reflash stock rom with odin. Theres a thread somewhere guiding howto do so for s5830i. Also do note that anything for original s5830 wont work on your s5830i.
Last but not least, do read more and understand what you're trying to do before u really hardbricked the poor thing.
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Samsung Ace s5830i Stuck on recovery
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
john.smith1972 said:
Thanks for the pointers, I really appreciate it and everything works fine now.
It was actually my nephew's phone, so I have no idea how he managed to brick it like that.
Click to expand...
Click to collapse
DevDeep700 said:
Hi
Can you please tell me how you have solve ur problem of s5830i recovery mode
Cause am Facing this problem
I have searched many forums but no success yet
anybody please help me..........
Click to expand...
Click to collapse
Don't use nothing from GT-S5830 model your model is GT-S5830i
What's exactly your problem?
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
evilpiggy6172 said:
hold vol + and - and plug in usb cable to get into donwload mode. flash the s5830i stock rom.
Click to expand...
Click to collapse
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Centrumgsm said:
I have the exact same problem. Except I can't even enter into download mode. Phone boots into recovery mode regardless of what buttons I press, get stuck at "formatting /data", and I can't flash anything. All the buttons seem to function as intended in the recovery menu, so it's not a hardware failure. Any ideas?
Click to expand...
Click to collapse
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
mahithm said:
The Download Mode key combination is Vol Up+ Vol Down+ Power button. Did you install anything that was not meant for device? Do post the result. Hope I Helped
Click to expand...
Click to collapse
Oh right, sorry. Forgot about the download mode combination. Why they found it necessary to change it for this one model, I'll never understand. Flashed it back to life, thanks
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Have you flashed a fresh rom?
PS: It's a WRONG SECTION
Falco ALB said:
Hey there . I have made the same thing with my s5830i i have flashed with odin but still the same problem stuck on --appling--multi--csc -- can any one help me?
Click to expand...
Click to collapse
Flash stock rom thru odin then from recovery mod Clear data and cache then reboot. [emoji4]
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Ghost1105 said:
I know this is kind of old but I have same problem, i got this phone from cousin and it wasnt booting , it was going straight into recovery, since my mother has same phone and i used odin before to save her, i am familiar with odin so, I tried new firmware flash with odin , it passed on odin but again doesn't want to finish install on the phone, it says
installing update...
--appling muti-csc --
Fromatting /cache...
-- Appling Muti-CSC __
and it wont go anywhere from there , and if I reboot it goes back in recovery again and it wont format data again, formatting cache works. I also tried to flash cm7, rooted it, installed cwm but when i do reboot it is not in cwm but in regular recovery, so after that I installed cwm again and without reboot installed cm7 kernel wich succeded , after that installing the cm7 itself stuck on "installing update" , could this be hardware issue, it always seem to be stuck when its doing something with "data". I tried couple odin flashes multi package and single package, i was carefull to chose correct firmware, only thing i could make mistake is maybe with pit and re-partition. Anyone help i would appriciate it much since i have no other phone than this.
Click to expand...
Click to collapse
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
amolgosavi said:
Use odin 1.85 and flash splitted firmware from odin..
http://forum.xda-developers.com/showthread.php?t=2199503
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
I already tried that, still same
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working. I tried to flash a stock rom and I got a successful flash, but a bootloop at restart.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
I can flash using odin using a usb jig to put it in download mode
So... What do you propose to do?
Thanks in advance!
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Flash DorimanX kernel and restore home button in STweaks.
GamingDj said:
Flash DorimanX kernel and restore home button in STweaks.
Click to expand...
Click to collapse
Uhm I think this is not the only viable solution.
Investigations and trials
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Hello,
I have the same issue, I was in CM 10.1.1 stable and home button not working.
Then, I tried to flash a stock ROM via Odin, and now my phone is stuck in a bootloop...
I tried to flash different ROMS (always stock from sammobile.com) but every time the result is the same: bootloop.
The problem is that as my home button is not working, I cannot go into recovery mode to do a factory reset or flash a custom ROM, neither in download mode (I use a home made JIG for this).
I have also tried to flash the correct OMAP pit file, hoping for it to do a full wipe, but did not work either, my phone is still in a boot loop.
My last hope would be to do a OMAP flash as described here: link
But I am not sure it will fix the problem and this solution is quite risky...
Does anyone have another idea / suggestion ?
Also, I am not confident in changing my home button as it is necessary to remove the LCD first...
@GamingDj: I did not found any i9100g compatible DorimanX kernel, only i9100...
Many thanks in advance for your help.
Cheers
Help
Any help on this issue please ?
My phone is still dead
Fixed it !
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Can u use adb?
then, you can enter the recovery mode by using adb reboot recovery
Sent from my Nexus 4 using Tapatalk 4
abuisset said:
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Click to expand...
Click to collapse
can you point out what cwm kernel you put on?
RadarZgin said:
can you point out what cwm kernel you put on?
Click to expand...
Click to collapse
Hello,
Here is what I used:
Stock Firmware 4.0.3 I9100GXXLPN from sammobile.com
CWM 6.0.1.2
Odin3 v1.85
Cheers,
Anthony
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?
Hey I 'm new here and I need a help let me start from first yesterday i tried to install TransWin Cutom Rom for GT-I8552 I couldnt install cwm recovery by odin method so I rooted my phone first with RootGenius and tried to flash cwm recovery with rashr app this app successfully flashed cwm recovery in my phone and after that a pop up appeared saying that whether i wanted to go to recovery or not so I clicked yes and in a couple of seconds I was in the recovery mode I already had the rom in my extSD so I flashed the rom and when I tried to reboot the system I was booted again in the recovery I guess I was in cwm recovery bootloop so I thought I should try to flash stock rom via odin , I was in the recovery mode so I went to advance options and from there I chose 'reboot to bootloader' and then I was able to enter download mode so I connected my phone to laptop via usb data cable after connecting I opened odin but niether did odin recognize my phone and nor did my laptop it recognizes another phones but not mine than I thought to install another rom in a hope that it would help me so I downloaded DroidWin Rom moved to extSD and flashed it successfully but even that didnt helped me I was again in the cwm recovery bootloop I tried all the "CWM RECOVERY LOOP FIX" available on google but unfortunately all in vain is it some sort of hardware problem or its a software problem anyways whatever it is the main point is WHAT SHOULD I DO NOW TO RECOVER MY PHONE CAN ANYONE PLEASE HELP ME ?
ANY HELP WILL BE GREATLY APPRECIATED
may it help you
Two days before i was too suffering from a bootloop.I was creating lollipop rom for quattro but eventually due to error in updater script while flashing rom my phone got stucked in bootloop, i flash stock rom through odin twice but in vain.But finally i was able to solve it
Plz Follow the steps below
1. Make Sure Battery is fully 100% charge
2. start odin in PC (make sure package is up to date or u can download it from sammobile)
3. Switch to download mode by pressing Volume DOWN + HOME + POWER button:good:
4. connect phone to pc
5. press volume up and then flash stock rom
if above soln wont work then WIPE dalvik cache and WIPE cache partition and then try to flash philz recovery or twrp recovery
tempdhyey said:
Two days before i was too suffering from a bootloop.I was creating lollipop rom for quattro but eventually due to error in updater script while flashing rom my phone got stucked in bootloop, i flash stock rom through odin twice but in vain.But finally i was able to solve it
Plz Follow the steps below
1. Make Sure Battery is fully 100% charge
2. start odin in PC (make sure package is up to date or u can download it from sammobile)
3. Switch to download mode by pressing Volume DOWN + HOME + POWER button:good:
4. connect phone to pc
5. press volume up and then flash stock rom
if above soln wont work then WIPE dalvik cache and WIPE cache partition and then try to flash philz recovery or twrp recovery
Click to expand...
Click to collapse
Hey i tried that too but my phone wasnt detected in odin i tried it in another pc though it didnt worked so how could i flash a rom dude anyways thanks for replying and helping I really appreciate it :good:
Monarch Maisuriya said:
Hey i tried that too but my phone wasnt detected in odin i tried it in another pc though it didnt worked so how could i flash a rom dude anyways thanks for replying and helping I really appreciate it :good:
Click to expand...
Click to collapse
Do you have Kies install in your PC ? ( IF yes ) then plz uninstall it ,as it kill odin functions and wont let it work. But make sure to install device driver ..
Hope it work
tempdhyey said:
Do you have Kies install in your PC ? ( IF yes ) then plz uninstall it ,as it kill odin functions and wont let it work. But make sure to install device driver ..
Hope it work
Click to expand...
Click to collapse
Damn it didnt worked
THANKS for replying:good:
monarch maisuriya said:
damn it didnt worked
thanks for replying:good:
Click to expand...
Click to collapse
i think i should take it to the service center
I am using a gt i8552 Samsung galaxy grand Quattro , rooted with kingo root.
somewhere in an article I read supersu is better
so I tried installing supersu me pro
. But It showed I was not rooted with king/kingo root. so
I flashed supersu.zip from cwm the recovery I used.
anyway after some time it showed a message update binary
there were 2 options 1) normal.........2)cwm/twrp
obviously I chose normal .
it said installation failed
. I chose cwm recovery fro that moment on whenever I chose reboot system now it would reboot to cwm.
then after trying some options like shutdown(wouldn't work even if I waited 2hours )
reboot to bootloader(the only place else I could go other than cwm)
I started surfing the internet . I got confused in a bootloop and recovery loop . I also tried flashing fixpermissions.zip
I tried factory resed wiped cache partition dalvik chache formatted /cache istalled a custom rom(cosmic rom for gti8552)
. thinking that it is a bootloop :silly: . then I understood and I flashed stock recovery( http://d-h.st/hcA ) <<<<<<biggest mistake of me all
now I am in a boot loop I cannot access bootloader nor recovery . all I can see is samsung
update > when Samsung appered I pulled out the battery put it again I saw galaxy grand quatrro :happy: I got into stock recovery somehow and rebooted but the it didn't even show Samsung
update> I am able to access stock recovery anything I can do
Thanks to pbhogal98
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
that problem was solved but........ Now I am in one more problem..........
I want to install custom ROM (cosmic rom)
But I cannot as of I cannot enter the recovery I have flashed twrp. Anything new was the triangle with ! Below Samsung but I could not enter recovery
...........
So I also tried cwm , I could not enter that also..
So I need another way to install custom ROM or way to fix that recovery
I would really love some advice plz
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
thx but.....
tejus said:
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
Click to expand...
Click to collapse
see the problem is as told in description I factory reset resulting in the usb debugging is not checked so I can not use odin as it does not add the device.
I can now access stock recovery . any help
can I use adb to istall the firmware.if so then how
No need
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Using AP ? When I so connect it Odin does not show added any idea why then??
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
:good: https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Thanks turns out I did not open Odin with admin
:good::victory:thank you I shall try now
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
pshyco<me;68809915 said:
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
Click to expand...
Click to collapse
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
I just changed USB port and I'm done:good::laugh::laugh::good::highfive:
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
Thank you very much buddy:highfive:
Try to select file in Odin if not able to select then there may be error in downloaded file.
Try downloading through IDM
Everything done turns out I was not using usb port 3
.0 now every single thing is back to normal
pshyco<me said:
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
Click to expand...
Click to collapse
Use flashify
Y_A_S_H said:
Use flashify
Click to expand...
Click to collapse
Firmware was successful installed buddy I have a new problem see above
You should try usb jig if its works it might take you to download mode. And if you got stuck in cwm recovery loop just flash cwm again and make sure that you select auto reboot.