Okay people, we now have a fully functional CWMR
The Goods
Official builds from clockworkmod.com
And koush had been busy and hopefully has a few things fixed.
recovery-clockwork-6.0.4.4-hammerhead.img
Code:
sha256: 0a1f654df4dc5687762c679ea9da5d2a5706448fe8e99052e53a1c3f6940e38d
recovery-clockwork-touch-6.0.4.4-hammerhead.img
Code:
sha256: 04d3214635fc078644bb60fb2fff6481098fd5f1292638ed9292fd11a307836f
Able to be installed via ROM Manager now too.
My Builds w/ swipe/touch controls enabled
recovery-clockworkmod-6.0.5.0-hammerhead.img
To Install:
Code:
adb reboot bootloader
Code:
fastboot flash recovery recovery.img
NOTE: To access the backup via a root explorer, look in /mnt/clockworkmod.
Thanks to
Exel - for testing
ricky310711 - for making me use my noggin.
Anyone else that tested!!! I thank you!
DISCLAIMER: As always, I am not responsible for what you do with your device. USE AT OWN RISK!!!
XDA:DevDB Information
[RECOVERY] [CWMR] [Unofficial] Clockworkmod Recovery for the Nexus 5, Tool/Utility for the Google Nexus 5
Contributors
PlayfulGod
Version Information
Status: Stable
Current Stable Version: 6.0.4.6
Stable Release Date: 2014-01-08
Created 2013-11-04
Last Updated 2014-07-02
Reserved
screenshots provided by Exel.
Reserved
TESTED!!!
Hey Bro i just tested your CWM .....I LIKE THE RAINBOW MODE BTW
the only thing that didnt work was the ENTER
up/down work fine i just couldnt Select anything
good job though
Froz3nsolid said:
Hey Bro i just tested your CWM .....I LIKE THE RAINBOW MODE BTW
the only thing that didnt work was the ENTER
up/down work fine i just could Select anything
good job though
Click to expand...
Click to collapse
does swipe/gesture control work???
I/we prolly will have to do a custom recovery_keys.c to get the power button to select working.
And thanks, gweedo767 is the one to thank for rainbow mode and swipe control.
PlayfulGod said:
does swipe/gesture control work???
I/we prolly will have to do a custom recovery_keys.c to get the power button to select working.
And thanks, gweedo767 is the one to thank for rainbow mode and swipe control.
Click to expand...
Click to collapse
i was able to do UP/DOWN
but the enter doesnt work though i tried swiping to the right anywhere on the screen and .....................nothing
question if i use an app like flashify it should work right
im trying to flash a kernel cause the battery life is a bit disappointing
Froz3nsolid said:
i was able to do UP/DOWN
but the enter doesnt work though i tried swiping to the right anywhere on the screen and .....................nothing
question if i use an app like flashify it should work right
im trying to flash a kernel cause the battery life is a bit disappointing
Click to expand...
Click to collapse
should be able to flash a boot.img just like you did recovery. Just sub in
Code:
fastboot flash boot yourboot.img
instead.
Oh, you are on here!
Hey, bud. Still waiting for my nexus.. well, waiting to get off work. xD
PlayfulGod said:
should be able to flash a boot.img just like you did recovery. Just sub in
Code:
fastboot flash boot yourboot.img
instead.
Click to expand...
Click to collapse
i know but i cant seem to find the .IMG in the devs OP all i find are .ZIPS
im trying to unzip it to see if i can find the .img in there
Froz3nsolid said:
i know but i cant seem to find the .IMG in the devs OP all i find are .ZIPS
im trying to unzip it to see if i can find the .img in there
Click to expand...
Click to collapse
Yea the img is prolly in the zip. He prolly has users using TWRP to flash it.
Ah......but i hate twrp imma ask if he can provide link to .img
Sent from my Nexus 5 using XDA Premium 4 mobile app
Froz3nsolid said:
Ah......but i hate twrp imma ask if he can provide link to .img
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
pull it from the zip
Zip filed is corrupted ?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Good effort, but unfortunately select option not workin therefore CWM unusable..
Thank you and keep up the good work..
PlayfulGod said:
pull it from the zip
Click to expand...
Click to collapse
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Exel said:
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Click to expand...
Click to collapse
Look on the TWRP OP is its on the same page that you found this
This is for.CWM
Sent from my Nexus 5 using XDA Premium 4 mobile app
fazzieng said:
Good effort, but unfortunately select option not workin therefore CWM unusable..
Thank you and keep up the good work..
Click to expand...
Click to collapse
yes I realize that and thanks, still working on it.
Exel said:
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Click to expand...
Click to collapse
Troy_Dees just added what he needed for TWRP and doesnt appear to have touch much of the stock code itself. Will have a closer look tho. And afaik TWRP is touch only.
Froz3nsolid said:
Look on the TWRP OP is its on the same page that you found this
This is for.CWM
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, was actually wondering about the enter button not working, not really about TWRP.
PlayfulGod said:
Troy_Dees just added what he needed for TWRP and doesnt appear to have touch much of the stock code itself. Will have a closer look tho. And afaik TWRP is touch only.
Click to expand...
Click to collapse
Hm, then would an alternative be trying to build ClockworkMod Recovery Touch until the button issues are solved?
Just throwing ideas out.
As mentioned before the select key does not work, also the resolution is huge and this makes the writing in recovery super small, the few lines available are like 3mm in height and almost impossible to read
Exel said:
Thanks, was actually wondering about the enter button not working, not really about TWRP.
Hm, then would an alternative be trying to build ClockworkMod Recovery Touch until the button issues are solved?
Just throwing ideas out.
Click to expand...
Click to collapse
I cant build touch until its forked into CM repos. I dont have access to koush's touch src.
hutzdani said:
As mentioned before the select key does not work, also the resolution is huge and this makes the writing in recovery super small, the few lines available are like 3mm in height and almost impossible to read
Click to expand...
Click to collapse
K that can be addressed.
Also new img uploaded, same link.
Related
Ubuntu Touch Developer Preview for the Fascinate
// It took me a while to get it right, but here it is.
//Camera works, wireless internet works.
Haven't checked sound.
Don't know if phone or SMS works.
Need testers.
//How to install: DO A BACKUP FIRST!
Get the zip here Then get this. Go to recovery, do a wipe/factory reset.
//Flash the first zip, don't reboot yet. Go to Mounts and Storage, mount /data and then format it or it won't work.
//Then flash the second zip and reboot.
//After you reboot, don't do an apt update. It seems to bork things up for me. Using adb on your computer, type 'phablet-flash -d grouper -b' (to update to the latest).
Enjoy.
The above is the old way. Thanks to UnjustifiedDev the new build is below:
"Ubuntu touch
1. Download bootstrap http://goo.im/devs/Unjust/Fascinate/...scinatemtd.zip
2. Download preinstall http://cdimage.ubuntu.com/ubuntu-tou...blet-armhf.zip
yes it is 300+mb make sure you have space on your sdcard for it
3. Download layout fix http://goo.im/devs/Unjust/Fascinate/...layout_fix.zip
4. Reboot to recovery wipe data etc then flash bootstrap file first the cm-10.1 zip then reboot recovery
5. in ubuntu's purple recovery flash the saucy zip takes a while to flash make sure your battery is charged
6. Flash layout fix right after saucy zip completes then reboot
7. Note this a preview not a daily driver it is pretty cool but it lacks full features. Wifi works idk if sound works or data my phone is not in service
Source https://github.com/Ubuntu-Fascinate I did fix the layout no need for an extra zip next build "
You are the man, Unjust!!
Remember, it's just a developer preview at this point. Not much you can do with it right now.
Redwolves (meandmine)
[
Since the Fascinate is not my daily driver, I have no way to test 3G or SMS. Anyone want to give a try and post your results?
Thanks, Redwolves
I will keep this updated as much as I can. I'll also put detailed instructions an my github page for anyone who wants to compile their own.
I will put up the instructions on my github page tonight. I'll link to it here when I do.
Redwolves
*face palm* good job dude I was just building it was gonna be a surprise for y'all. You beat me to it lol. Nice job.
Sent from my SCH-I500 using Tapatalk 2
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Unjustified Dev said:
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Click to expand...
Click to collapse
Is it really can't work for the cdma?
Sent from my SCH-I500 using Tapatalk 4 Beta
ekowanz said:
Is it really can't work for the cdma?
Sent from my SCH-I500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Works fine for cdma it uses cm10.1 source so anythibg cm10.1 has it can use.
Unjustified Dev said:
Really cool and as far as I know cdma isnt compatible with ubuntu touch but wifi should work. Im just glad yours worked I would really like to see a patch or could you push the source you used to get it working. I tried at least 10 times no luck at all on booting.
edit nvm thanks for this
Click to expand...
Click to collapse
No patch needed boots and works fine for me straight from source but I like android better just lack of apps on Ubuntu. And agreed nice job
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
No patch needed boots and works fine for me straight from source but I like android better just lack of apps on Ubuntu. And agreed nice job
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
I meant patch as in a diff file to see how he modified things
Unjustified Dev said:
I meant patch as in a diff file to see how he modified things
Click to expand...
Click to collapse
I didnt need to modify anything.
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
I didnt need to modify anything.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Im talking source code you cant just build it like a regular rom there is things you need to modify
Unjustified Dev said:
Im talking source code you cant just build it like a regular rom there is things you need to modify
Click to expand...
Click to collapse
I didn't have to modify anything it just used the cm files. Did you follow the official port guide or some off the wall nut job guide here on xda? Maybe I'm just lucky idk. Who cares.
Sent from my SCH-I500 using Tapatalk 2
I followed the porting guide. Commented out AriesParts and Samsung-something-or-other in a makefile in /devices. Patched /kernel/samsung/aries/fs/proc/array.c and /kernel/samsung/aries/arch/arm/configs. I did some other other patches to a makefile in /build. I played with it for about a month using just the phablet-armhf.zip. I had it booting for about 15 seconds after a while. I was going through logcats and trying to trace them back to any warnings thrown during compilation.
Then I found out it uses the grouper image. Voila, instant boot. I left the changes in the source, though.
redwolves said:
I followed the porting guide. Commented out AriesParts and Samsung-something-or-other in a makefile in /devices. Patched /kernel/samsung/aries/fs/proc/array.c and /kernel/samsung/aries/arch/arm/configs. I did some other other patches to a makefile in /build. I played with it for about a month using just the phablet-armhf.zip. I had it booting for about 15 seconds after a while. I was going through logcats and trying to trace them back to any warnings thrown during compilation.
Then I found out it uses the grouper image. Voila, instant boot. I left the changes in the source, though.
Click to expand...
Click to collapse
I'll put up detailed instructions and the code on my github page when I get the chance. Life has 'a life' in it, you know.
Scott
If anyone is having problems, please see if you can grab a logcat and send it to me.
for some reason wen i install the 2nd zip, i get status 7 error
arqda said:
for some reason wen i install the 2nd zip, i get status 7 error
Click to expand...
Click to collapse
You're the second person who has said that. I can't reproduce it on my phone. I need to find a common thread.
What Baseband version are you running?
Thanks, Scott
redwolves said:
You're the second person who has said that. I can't reproduce it on my phone. I need to find a common thread.
What Baseband version are you running?
Thanks, Scott
Click to expand...
Click to collapse
Ill try to give u as much detai l as possible.
Baseband: i500.04.V.EH03
Tried flashing using CWM4, 6, modified6, and twrp
Using 1gb sd card (class ?) To flash
Finally got around to detailed instructions on my github account. It's here. I'll push the code up shortly.
redwolves said:
Finally got around to detailed instructions on my github account. It's here. I'll push the code up shortly.
Click to expand...
Click to collapse
I did all of that except one thing I forgot array.c also we dont need samsung service mode
Unjustified Dev said:
I did all of that except one thing I forgot array.c also we dont need samsung service mode
Click to expand...
Click to collapse
"While in /device/samsung/aries-common, edit device_base.mk. Comment out AriesParts and SamsungServiceMode under
"# Device-specific packages"."
I thought I had it in there.
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Note 10.1 2014 ** Stable **
- wifi: SM-P600 (lt03wifi)
- 3G: SM-P601 (lt03wifiue)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Known issues
- minor: screen capture is not working.
- minor: poweroff from recovery when usb is connected reboots into recovery, however, offline charging from rom is fine
The Note 3 version seems good, so I do not expect many issues here
Please test:
- mount USB storage on PC
- USB OTG mount and format to exfat/ext4 for testing
- Backup to exfat sdcard or USB OTG
ThX for!
The Recovery doesnt work. (P605)
It depends @ Bootscreen with follow message:
"Recovery is not seandroid enforcing" + "Set Warranty bit : recovery
Greets
Chris
Chris X. said:
ThX for!
The Recovery doesnt work. (P605)
It depends @ Bootscreen with follow message:
"Recovery is not seandroid enforcing" + "Set Warranty bit : recovery
Greets
Chris
Click to expand...
Click to collapse
But except that message, does it work?
@Phil3759,
Glad to see you once more on the Note 2014 community, been using your recovery on the old note 10.1 2012 edition.
Any plans for the 601 variant .( Ready to test )
Phil3759 said:
But except that message, does it work?
Click to expand...
Click to collapse
Unfortunately, no!
It nothing happens.
Chris X. said:
Unfortunately, no!
It nothing happens.
Click to expand...
Click to collapse
I will try to change ramdis
Phil3759 said:
I will try to change ramdis
Click to expand...
Click to collapse
Take your time, Phil. :good:
Today I had hardbricked my tablet.
I had been trying to develop a new root variant for P605.
TWRP seems also slightly buggy. After a full wipe my tablet died.
Greets
Chris
Chris X. said:
Take your time, Phil. :good:
Today I had hardbricked my tablet.
I had been trying to develop a new root variant for P605.
TWRP seems also slightly buggy. After a full wipe my tablet died.
Greets
Chris
Click to expand...
Click to collapse
:good::good::good:
for the feedback
Good luck in RMA also
Can't wait for this to work properly either.. TWRP seems to stop me from flashing a pre-rooted ROM, kind of a must for a worthy ROM imho..
Hoping this will flash
Sent from my SM-P600 using Tapatalk 4
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Phil3759 said:
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Click to expand...
Click to collapse
This is recovery.img extracted with 7-zip from MJ9 Nordic firmware. Hope it helps you.
https://dl.dropboxusercontent.com/u/8026412/recovery.img
Phil3759 said:
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Click to expand...
Click to collapse
Here :
recovery.img.tar
@Phil do u have anything for me to test ?
---------- Post added at 07:57 AM ---------- Previous post was at 07:54 AM ----------
[/COLOR @Phil do u have anything for me to test ?
edit.. 605 model?
I'll be very patient with my 600 :silly:
Version 6.04.3 Alpha
http://d-h.st/users/philz_touch/?fld_id=29981#files
This is a repack around a pure stock ramdisk, like I used to do with Samsung devices.
They often work better this way to start with
It could have some selinux issues, but those we fix later, once we get it boot into gui
State was moved to Alpha to reflect it is early debugging and untested
Noobs should stay away for now
I love you man!!!!
Thanks for your great work, to my, one of the best recovery.
Psycho Pufo said:
I love you man!!!!
Thanks for your great work, to my, one of the best recovery.
Click to expand...
Click to collapse
Then flash it and report back
Link to new version fixed, sorry
Let mw know in details how it works. Remember, I do not own the device, I am relying on your description/logs to fix things
Any plans for P600?
Sent from my GT-I9300 using XDA Premium 4 mobile app
As always, you are responsible for your phone, and its warranty
I built this recovery because adb was not working in the official. I have submitted all my changes and I am sure this will be fixed shortly but until then I will put this here. Bassically I compiled the stock ND2 kernel with some small modifications and rebuilt the recovery.img with that. everything else should be exactly the same but honestly I did not test everything so please feel free to let me know.
***UPDATE 10/4/14***
Created version thats branded as kltespr, did this so CM11 is now able to auto update without modifying the CM package. Also, ADB still works. If anybody knows how to reduce the size of this image, please let me know since it is a little larger than the stock TWRP. Also built an image from the 2.8.0.1 base, which seems to have the same kernel from my original build to enable ADB, all I added here was the mod to kltespr so CM can update.
Use dd to install these images:
Newest Link 10/4/2014, working ADB and branded as kltespr so CM11 auto updates work:
Working ADB and tagged kltespr so CM11 auto updates work
Same as above but built from version 2.8.0.1 of TWRP
---Below here are all klte with working ADB, but CM11 fails to auto update complaining of wrong device---
Here is the link:
miked63017-openrecovery-twrp.img
Or try to grab it from my drive:
miked63017-openrecovery-twrp.img
Use odin to install this:
miked63017-openrecovery-twrp.tar.md5
Kernel Source Used:
https://github.com/miked63017/SM-G900P_ND2_KERNEL
This file won't download.
ChadH42 said:
This file won't download.
Click to expand...
Click to collapse
Added my google drive URL back to OP
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Excellent. Ty
Sent from my SM-G900P using Tapatalk
miked63017 said:
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
vinman12 said:
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I haven't heard anything back yet, but their test images worked as does the one in OP
Sent from my SM-G900P using xda app-developers app
Sweet thanks
Sent from my SM-G900P using Tapatalk
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
talroot said:
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
Click to expand...
Click to collapse
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
I have used all 3 available customer recoveries (TWRP, CWM, Philz) & I prefer TWRP. So me is easier and fool-proof.
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
sleshepic said:
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
Click to expand...
Click to collapse
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
miked63017 said:
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
My commits up there now wont help with that, I didnt push my defconfig.
You can easily change the compression and logging (less of a size diff) in either the defconfig in .../configs or through
$ menuconfig
prior to build
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
Thanks, I went with TWRP since that's what I'm familiar with.
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
sleshepic said:
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
Click to expand...
Click to collapse
Its a flashable zip. I never use winzip so I'm not sure if it should be able to be extracted with it. I think its technically a 7zip zip file in windows, linux I just run 'unzip $FILENAME'. The google drive link is probably the most reliable, maybe try that one if you haven't already. If there are still problems I can re-upload, just let me know.
Sent from my SM-G900P using XDA Free mobile app
**UPDATE**
I take that back I only uploaded the recovery.img, I flash it with dd after putting it in /sdcard/
Code:
dd if=/sdcard/miked63017-openrecovery-twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Or if you just want to see whats in it, you can extract it like a normal boot.img.
Will try to put up a zip and/or tar tomorrow, honestly I thought they would have had an official one with adb working by now.
Flashify
Just use Flashify to push .img to your phone.
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
vinman12 said:
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Haven't seen this before, what rom are you flashing?
Sent from my SM-G900P using XDA Free mobile app
Below is a recovery flashable zip file containing a recompiled power.shamu.so that has the Nexus 6 double-tap to wake functionally enabled. The zip was created using the latest stable 5.1.1 AOSP source (LMY48I), and you don't have to be rooted in order to install it. A description of the two zip files can be found below:
Shamu_Power_Tap2Wake.zip – Zip file for installing the recompiled power.shamu.so with double-tap to wake functionally enabled.
Shamu_Power_Stock.zip – Zip file for installing the the stock power.shamu.so with double-tap to wake functionally disabled.
Before you proceed make sure your bootloader is unlocked and you have a custom recovery installed!
Install Instructions
1. Download and copy the selected zip file into your phone
2. Boot into a custom recovery
3. Flash the mod or stock zip
4. PROFIT!
The standard disclaimer:
I'm not responsible if your phone blows up, becomes bricked, lights on fire, etc.
Great mod! Thanks
Envoyé de mon Nexus 6 en utilisant Tapatalk
Didn't work for me. TWRP said something about couldn't verify ezusiigned zip. Thanks anyway.
Sent from my Nexus 6 using Tapatalk
addcancercat said:
Didn't work for me. TWRP said something about couldn't verify ezusiigned zip. Thanks anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
of course you can always disable the signed zip flashing only in twrp.
Any1 tried on Android M?
It works, but my Nexus doesn't ask for my pin anymore. Unlocks straight to home screen.
Sent from my Nexus 6 using Tapatalk
Can we have one for swipe to wake?
Sent from my Nexus 6 using Tapatalk
jtwlbz said:
Can we have one for swipe to wake?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Swipe to wake is a kernel feature I believe so I don't think it's possible without flashing a kernel that supports swipe to wake.
Sent from my Nexus 6 using Tapatalk
Works great, thanks.
Doesn't work on M. Any chance someone can make one for M?
solara1973 said:
Doesn't work on M. Any chance someone can make one for M?
Click to expand...
Click to collapse
I also have been searching and waiting and hoping a developer can bring this up to M, I know it can be a one of our developers just has to take interest, I thought it was out there and I was just not looking at the right places, that still may be true, I hope a developer she's our posts and if not make the apk at least point us in the right direction.. :good:
Philly Jim said:
I also have been searching and waiting and hoping a developer can bring this up to M, I know it can be a one of our developers just has to take interest, I thought it was out there and I was just not looking at the right places, that still may be true, I hope a developer she's our posts and if not make the apk at least point us in the right direction.. :good:
Click to expand...
Click to collapse
There is a Nexus Double tap to wake app on the play store. Have you tried that?
LuRock said:
There is a Nexus Double tap to wake app on the play store. Have you tried that?
Click to expand...
Click to collapse
I haven't tried it yet the developer is offering it for free here on xda don't remember where it was I just did a Google search and found it that way, I have a couple of phones I'll try and see if it works, and let you know, if you get to it before me let me know if it's working........ :good:
not working on marshmallow
solara1973 said:
Doesn't work on M. Any chance someone can make one for M?
Click to expand...
Click to collapse
yeah for me too not working on marshmallow. stuck in the bootloop had to re flash the marshmallow. Anyways thanks for the build. hope to see M version soon.
Delete.
Congratulations man. Its great team to be in.
Device: G928C
Rom: CyanogenMod 13
Kernel: Mynogen
Congratulations ,well done job
Interesting , ?
Camera doesn't work.
Well done
Sent from my SM-N920T using XDA-Developers mobile app
lkiiii said:
Camera doesn't work.
Click to expand...
Click to collapse
What kernel did you flash with it?
Milly7 said:
What kernel did you flash with it?
Click to expand...
Click to collapse
Doesn't matter the camera just doesn't work yet
Sorry fellas. Just waiting for a friend who helps me with the building. Camera doesn't work but that is definitely on the list.
Thanks and sorry for the wait. Soon as I get the clear, I'll update OP.
Thank you so much, will report back as soon as done.
I'm happy I finally got to install, Nor audio calls neither Soft keys, text messages are working same as data, youtube, music, chrome, this a good beginning.
I installed the version 3 from the link given (S6 Edge +)
Thank you again.
Thank you so much for your Note 5 support
Updated OP guys.
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
rudeboy87 said:
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
Click to expand...
Click to collapse
Hello and thanks for trying.. So it eventually booted? Supesu can cause those kind of reboots while it sets up. . The cm was was made for Tmobile and international.. You could try to make sure apn is right and change your data connection. Like from 4g to 3g. Sometimes that triggers it. And what modem are you using?
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
rudeboy87 said:
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
Click to expand...
Click to collapse
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
LiL_Assassin said:
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
Click to expand...
Click to collapse
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
rudeboy87 said:
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
Click to expand...
Click to collapse
Try checking your apns and that they are correct. And changing.. If that doesn't work.. It might because of sprint device. Fingers crossed.
LiL_Assassin said:
Hello guys! After a few months I decided to look into building a CyanogenMod Kernel for our beloved Note 5.
It is very much a work in progress and any issues should be reported here, please make any backup efs back ups, and nandroids
Link to download cm13 by rainbow dash. Please download this first and then download this kernel... As that is what I am using as my daily driver and if you have random reboots there are ways to fix that. Just report what is making you reboot and I will help you as much as I can. It is still a very beta build!
http://forum.xda-developers.com/s6-edge-plus/orig-development/cyanogenmod-13-unofficial-t3384252
Camera doesn't work.
Some apps don't work unless you personally remove it's libs and stop them from generating. (eg chomp sms on message send)
Source code: https://drive.google.com/file/d/0B8Ps-jVB8IblU0xRWTZUdDlMZ3c/view?usp=docslist_api
Credits @Konsstantine34 @Rainbow_Dash @UpInTheAir (a huge mentor and alot of respect) @A Close friend. @RaymanFX for his first build of cm13 for our device.
[UPDATE!] Due to unforeseen things. I must upload it as a boot.img download it and flash it via twrp and make sure to be able to view Img. Update will soon follow with a proper zip. Please make a backup and report back, any issues. Camera still does not work! Report back with any other issues! Or reboots.
https://www.dropbox.com/sh/7f7979c3fiq4016/AAAPgzCwjArGBd67TV8b3wMHa?dl=0
Click to expand...
Click to collapse
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
CHE1 said:
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
Click to expand...
Click to collapse
In install menu select install image(right side) then select img then tick boot and swipe to install. When installing zips select install zip back again
Or install an app called flashify and select that img as kernel and flash