Could any one help me with this regard? - Sony Xperia P, U, Sola, Go

Hi to everyone.....!
Pls read my post and help me to resolve my problem, here my problem is that I'm unable to connect my Xperia u rom jellybean 4.1 v6 full kernel-experimental, to system when I connect my phone to pc it's only charging but my phone internal memory is not getting detected by my pc for a past 3 months I searched Google, xda but nonepost hhelped me and I got sick and tiered of being like this due this I'm unable copy any media files to my device. I tried with more than 7 pc mine's and my friends pc but in none worked I also cleared data of mtp extension services in settings>apps>all but nothing helped,, tried with adb but that also dint work. I tried with sdcard mod app installed in my phone and mounted with mtp and sdcard but nothing happened,tried connecting in fastboot and flashboot but it's not happening bcz while I'm connecting the phone in both fast and flash boots my phone illumination light blowing blue and green for just 3 seconds and phone turning on due to this my pc as well as my friends Pc not detecting in both fastboot as well as in flashboot. I tried with soft and hard reset my phone by following pressing vol up and power button for one vibration for softbrick and 3 vibration for hardreset but still nothing happened. And reinstalled mine's and my friends pc's os xp,Windows 7,8 as well as drivers for my phone fastboot,flashboot, and usbdrivers from both flashtool new and old versions as well as developers.snowmobile.com website but nothing happened finally I went Sony service centre in Chennai basically I'm from chennai. Over there they asked warranty I said it's out of warranty and they said it's board problem that too without checking they said this and asked for payment of 8000 inr, it's 80% of phone cost.I got wexed return my home with tears yes I'm not ashamed to tell this bcz my phone is morethan anything for me and finally I came to conclusion for hardware problem and I writing this in xda with my final hope if here in this forum to none help then I leave it to god.let me ask you devs and friends pls help I'm in great depression not popping out anything in mind was idle. Due to budget problem I'm unable to repair or any new phone. FINALLY MY LOST WORDS IM GREAT FANBOY FOR SONY PRODUCTS ESPECIALLY MOBILES AND TV,THIS MY XPERIA U IS AN MY ONE AND ONLY FIRST SMARTPHONE IT WORKED FOR PAST 1 1/2 YEARS LIKE CHARM BUT NOW THIS THING HAPPENED.I KNOW VERY WELL IN ELECTRONICS ANYTHING HAPPEN AT ANYTIME SO IF I BLAME MY BEST SONY I WILL PUT IN GREAT GILT,I LIKE TO CONVEY MY REQUEST THAT NEAE FUTURE PLS TRY TO STICK WITH SDCARD BCZ IF THIS MTP PROBLEM ARISES THEN BY MAKING USING OF SDCARD WE CAN HAVE CHANCES SONY PLS STICK WITH THAT.IF IT'S THERE THEN I MIGHT HAVE ALTERNATIVE BUT DUE TO MTP IM STUCK,I KNOW THERE MIGHT BE ANY REASON FOR NOT PUTTING SDCARD SLOT IN XPERIA U BUT STILL I REQUEST YOU SONY PLS PUT SDCARD SLOT IN UPCOMING XPERIAS. So finally coming to xda devs and members and friends I REQUEST you one and all to help me with this problem.please help me please help me please help me.THANK YOU ALL DEVS WHO ARE ALL SUPPORTING FOR CUSTOM ROMS,MODS especially DEVSHIFT,MUNJENI,DROIDXTREMER,DIVAKISH,etc.THANK YOU ALL OF THEM PLS CONSIDER THIS AS YOURS PROBLEM AND HELP ME OUT IN THIS.THANK YOU.

Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip

AKA#1 said:
Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip
Click to expand...
Click to collapse
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you

kumar8904 said:
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you
Click to expand...
Click to collapse
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.

Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........

AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
im using usb 2.0 port, pc os - windows 7 and mobile rom [UNOFFICIAL] Stock JellyBean 4.1.2 V6 [FULL] by DevSwift1, kernel - first experimental 0.3c and after suggestion phantom

AKA#1 said:
Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........
Click to expand...
Click to collapse
pc--- windows 7
mobile-- DevSwift1jellybean v6 full
usb port-- 2.0

AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone

Bro try making a CWM backup and reflash the ROM after triple wipe....I don't know why ADB's stuck.

QUOTE=AKA#1;4714 903 3]Bro try making a CW M b ackup and reflash the ROM aft er triple wipe....I don't know why ADB's stuck.[/QUOTE]
I did everything bro but nothing happened , I installed rom moretha. 5 times by wiping All the Necessar. One

Why don't you flash stock ICS firmware in flashmode(via flashtool)??

Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?

AKA#1 said:
Why don't you flash stock ICS firmware in flashmode(via flashtool)??
Click to expand...
Click to collapse
bro i already to;d you that iam unable to connect in any mode flashboot and fastboot i had reset soft reset used rubber band trick but nothing happened

MarketMaster said:
Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?
Click to expand...
Click to collapse
i have tried remounting in cmw but nothing happened about adb none response, there is no error. i have checked usb debugging while connecting with pc in mobile no such words "usb debugging enabled" its just charging thats it nothing more than that

your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.

kumar8904 said:
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone
Click to expand...
Click to collapse
Did you install PROPER DRIVERS?
I am back. Ignore forum signature 1st line.

You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com

AD9295 said:
your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.
Click to expand...
Click to collapse
bro thanks for your reply and effort for support and yes still im unable to connect my pc i followed every bit clearly as you mention in detail but still no chances. and i cant see 0fce" in vendor id.still i followed everything like adb,flashboot and flashmode drivers,flashtool drivers installed turning on usb debugging every ****ing thing but still no chances brother will you help me?

munjeni said:
You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com
Click to expand...
Click to collapse
bro i cant find those sony adb in device manager im using windows 7. i have installed everything but in uninstall and remove tab i cant see sony adb

This may sound silly but two things,
have you tried a different usb port
and is the sdcard mounted in cwm.
I have to make sure the sdcard is mounted before i can connect mine.
Do a hard reset hold power and up till the phone vibrates 3 times then try to connect to flashtool by holding power and volume down.

Related

Hero USB Connection Not Recognized

Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.

[Q] Bricked my HTC One X+

The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
vsp33ddyv said:
The titel says it all , and I need some help. I can still go in recovery but adb won't recongize my HTC, but I can still find it in fastboot. I formatted the sdcard, so I have nothing on there. Help would be much appreciated.
Click to expand...
Click to collapse
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Ghand0ur said:
Oh, trust me that's not your phone being bricked. You guys seriously need to know the correct vocabulary.
Bricking the phone: The phone's only use is to use it as a literal brick. It does not turn on, does not recover, does not charge, does not do anything and it can never be restored.
HOX+ can NOT be bricked unless you are S-Off'ed. Now that we got that out of the way,
you seem to understand that ADB is the solution here, that you need to sideload a rom, the question that you have is the adb does not recognize your phone, so follow these steps:
-Connect the phone using a different usb port, (basically thats the easiest thing), if its 2.0 then try 3.0 and vice versa.
-Restart your computer
-Restart your phone
-If you are on windows Vista and later, open start menu search for "cmd" then right click and run it as administrator, then you need to cd to your adb directory.
Code:
cd C:\Android\sdk\platform-tools
for example. then try adb devices.
Anyway hope you get it to work and have fun
Click to expand...
Click to collapse
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
vsp33ddyv said:
The only thing I can do is use fastboot , thx for noticing that I know I need adb sideload If I look in devices on my PC I can see 'ONE' with a yellow triangle next to it ( so this means drivers) I downloaded my HTC drivers and I right clicked on the device and then update from PC , I go to the folder where I installed it and click on search and it says it can't find a driver for this device.
I also tried 4 different USB ports both 2.0 or 3.0 , no result. I also tried to install TWRP instead of cmw but on TWRP my touchscreen doesn't work while on cmw it does. So i went back and flashed my recovery to cmw again ( I tried version 2.6 - 2.7.0.1 , no result )
So my problem right now can be solved once my device can be recognized by my PC. (Have HTC maneger installed , also downloaded drivers formy phone , got fastboot and adb on my PC )
For anyone who knows thanks
Click to expand...
Click to collapse
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Ghand0ur said:
Hmmm. I would say in the device manager right click on the one and uninstall. Then in fastboot mode unplug and replug the device, let it install fastboot again and then try if adb can read it now.
Click to expand...
Click to collapse
Still can't read it...
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
911jason said:
This has happened to my phone twice... fixed it the first time by using USB deview to remove all Android/HTC drivers, then reinstalled them with the HTC Sync installer. Couldn't get that to fix it last time though, so I tried another computer and it worked just fine. So my advice would be to find another computer and try it.
Click to expand...
Click to collapse
YES THIS IS WHAT WORKED ONLY I DID SOME OTHER STEPS TOO!!! Now I got adb running again and I can only push , I'll explain later in a full tutorial how to fix this now you guys can help me , I'm trying to download a cyanmod for my HTC because the stock is german and I can't download it , so can anyone upload the cyanmod endeavouru for me I keep getting error 502 bad gateway I almost fixed it !!!!! I need it badly !
OOkay so I thought I had figured it out , I uste TWRP to push files from PC to my Phone , then I installed cmw and tried to install the ROMS , but apperantly my roms were deleted. (I can't use TWRP because I need touch and the touch doesn't work , while in cmw the touch does work)
So if we can fix the TWRP touch I will know how to fix my problem !
I fixed the problem
I fixed the problem , thread how comming soon !
Here is my thread http://forum.xda-developers.com/showthread.php?p=52550145

[Q] HOW to fix bricked Xperia U when its not recognize by any pc and flashtool

hello guys,
i have sony xperia u having STE 4.4.4 kitkat. but becouse my phone not recognise in any pc, i flash stock rom via TWRP recovery. so now problem is my XPERIA U is not recognize in any pc via flashtool so i can't flash ftf or any other rom. so plz anyone have any solution to fix this problem??
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
jebediaah said:
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
Click to expand...
Click to collapse
i traied it so many time but laptop does not recognize my phone as xperia u so it do not connect in ither flashboot or fastboot mode. and i installed all drivers which are neccessory. :
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
jebediaah said:
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
Click to expand...
Click to collapse
ya i have tried installing drivers via flashtool and i also changed charging socket because it seems like some hardware problem but problem is still existed....and i dont know about linux much so can you give me some brief???/
THANK YOU
MaDTH Bistata said:
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
Click to expand...
Click to collapse
i was using xperia STE 4.4.4 kitkat. and then i flash Stock JB 4.1.2. but i dont have rom in my SD card and it is also not connected to flashtool ( every time i connect to pc its show the massage of Device is not recognise )so i cant revert it back to STE 4.4.4 so now what shold i do????
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
9228
MaDTH Bistata said:
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
Click to expand...
Click to collapse
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
dont worry
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
try it
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849170 check this and try it if you have any problems then contact me
data cable
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
MaDTH Bistata said:
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
Click to expand...
Click to collapse
Thanxxx buddy....
Reply soon
The_Ace said:
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
Click to expand...
Click to collapse
ya i tried it too
but no positive result.....
I have same problem which isnot sorted out yet
HEllow guys..
the simple solution that my device was needed was one soldering at charger connecting pin. i don't know at where that person did that soldering but now its recognize in every pc.
and thank a lot for your help in troubleshoot this problem

[Q] Can't boot on fastboot xperia mini st15i/smultron

Guys, I have a xperia mini st15i device with CrDroid 4.4.4 KitKat Rom. Recently I tried to flash RR Lollipop roms Kernel on my device. But I failed to boot on fastboot mode over and over again. I have tried different cables, different usb even different pc's. But all the time i tried to connect it to usb cable holding volume up button the blue light( which is counted as a signal of fastboot mood) blinks once and phone went into charging mood. If i connect it on flashtool, flashtool recognise my device. If i try to boot device into fastboot via adb through flashtool it just lost connection with phone and phone goes into regular boot.
Guys please help me with this.what can i do now? what i am doing wrong? I am totally stucked with this since last few days.
mujib.sheikh11 said:
Guys, I have a xperia mini st15i device with CrDroid 4.4.4 KitKat Rom. Recently I tried to flash RR Lollipop roms Kernel on my device. But I failed to boot on fastboot mode over and over again. I have tried different cables, different usb even different pc's. But all the time i tried to connect it to usb cable holding volume up button the blue light( which is counted as a signal of fastboot mood) blinks once and phone went into charging mood. If i connect it on flashtool, flashtool recognise my device. If i try to boot device into fastboot via adb through flashtool it just lost connection with phone and phone goes into regular boot.
Guys please help me with this.what can i do now? what i am doing wrong? I am totally stucked with this since last few days.
Click to expand...
Click to collapse
Make sure you have the fastboot and adb drivers installed.
Hope this helped....
Peace .
userst15i said:
Make sure you have the fastboot and adb drivers installed.
Hope this helped....
Peace .
Click to expand...
Click to collapse
i installed fastboot and adb driver as well as driver for smultron from flashtool/drivers/ directory. i dont know what i am missing actually
no one to help
Use the flash mode to flash stock firmware and try again
karandpr said:
Use the flash mode to flash stock firmware and try again
Click to expand...
Click to collapse
I can't go to flashmode either. while i am connecting my usb holding vol up or volume down button to enter fastboot or flashmode its just blinking the blue or green led and phone enter into regular boot or charging mode.
what can i do??
no flashmode, no fastboot. I have installed drivers and use more than two pc already. :crying::crying::crying:
mujib.sheikh11 said:
I can't go to flashmode either. while i am connecting my usb holding vol up or volume down button to enter fastboot or flashmode its just blinking the blue or green led and phone enter into regular boot or charging mode.
what can i do??
no flashmode, no fastboot. I have installed drivers and use more than two pc already. :crying::crying::crying:
Click to expand...
Click to collapse
Same thing happens if you type
Code:
adb reboot bootloader
?
karandpr said:
Same thing happens if you type
Code:
adb reboot bootloader
?
Click to expand...
Click to collapse
sorry for late. i was in vacation. please tell me where should i type this command. I am not a developer. Just learning things. Please help me by telling little elaborate.
mujib.sheikh11 said:
sorry for late. i was in vacation. please tell me where should i type this command. I am not a developer. Just learning things. Please help me by telling little elaborate.
Click to expand...
Click to collapse
Open command prompt on windows
Navigate to x10flasher_lib folder in flashtool
then type
Code:
adb reboot bootloader
karandpr said:
Open command prompt on windows
Navigate to x10flasher_lib folder in flashtool
then type
Code:
adb reboot bootloader
Click to expand...
Click to collapse
i just did what you said. it showed me-
"adb" is not recognized as an internal or external command, operable program or batch file.
mujib.sheikh11 said:
i just did what you said. it showed me-
"adb" is not recognized as an internal or external command, operable program or batch file.
Click to expand...
Click to collapse
Unzip folder
Attach phone to your computer
run 1.bat
karandpr said:
Unzip folder
Attach phone to your computer
run 1.bat
Click to expand...
Click to collapse
After running this batch file device rebooted.
hmm
Here is what you can do
Remove all drivers and reinstall fastboot drivers again from flashtool/
karandpr said:
hmm
Here is what you can do
Remove all drivers and reinstall fastboot drivers again from flashtool/
Click to expand...
Click to collapse
I have uninstalled flashtool, removed the folder from drive, rebooted pc and then again installed flashtool and drivers as well. but its still the same. actually i am little confused about removing all drivers you said. are those drivers contained in any other places in pc beside flashtool folder?
Use this tool to remove all USB drivers
https://code.google.com/p/usboblivion/
It will remove all USB drivers .
karandpr said:
Use this tool to remove all USB drivers
https://code.google.com/p/usboblivion/
It will remove all USB drivers .
Click to expand...
Click to collapse
i removed all drivers by this and re installed drivers from flashtool folder. its still same as before.
use this tool for restore
I had this type of issue and I solved by restoring my phone on origional firmware with WMShua
It flash and repair I am in hurry so I cant give you its link but see you later you can search in browser typing perfact brush or perfact flash
PARESH AHAR said:
I had this type of issue and I solved by restoring my phone on origional firmware with WMShua
It flash and repair I am in hurry so I cant give you its link but see you later you can search in browser typing perfact brush or perfact flash
Click to expand...
Click to collapse
what was your device? smultron?? or something else?
mujib.sheikh11 said:
what was your device? smultron?? or something else?
Click to expand...
Click to collapse
my device is xperia mini st15i smultron
PARESH AHAR said:
my device is xperia mini st15i smultron
Click to expand...
Click to collapse
Great. I got the tools. Installed it as well. But the problem is the tool is not in English interface, its in may be Chinese or Japanese, in what i am totally illiterate about.
Can you help me a bit on this please?

PLS HELP! Cant get ADB Developer mode after flash. SGP312 stock FTF lollipop help

My end goal is stock lolipop rooted.
I botched a flash and now I cant get developer mode / ADB working.
When I started, my tablet was stock ROM, towelroot. I connect tablet in developer mode, flashed dual recovery and everything was great. I copied the pre-rooted lolipop ROM to my SD card and flashed it. HOWEVER instead of turning off the device, I selected reboot from recovery. This resulted in boot loop.
SOOOO, I figured no worries, just flash old ROM and try again. So did this:installed Androxyde Flashtool
opened XperiFirm
downloaded 1276-8392 and 1274-8801 (I've tried the rest using both ROMs btw)
Tools>Bundler>Create>Selected folder>selected SGP312 for device
For branding I entered the above ie 1276-8392
For version I entered the ver ie 10.5.A.230
Flashmode>checked boxes to wipe everything​
The flash goes through without a hitch. Under about tablet, I see
Model : SGP312
Android Ver : 4.4.2
Kernel : 3.4.0-perf-g32ce454, [email protected]#1
Build Number : 10.5.A.0.230​
I activate USB debugging and unknown sources, connect to USB and Flashtool returns: Device connected with USB debugging turned off
I went into device manager and found the MTP driver. Also of note, the device ID is: USB\VID_0FCE&PID_5194&REV_0228
I downloaded Sony's ADB drivers, tried to manually update device driver and windows7x64 kicked back driver is not for your device.
I edited the INF to include the hardware ID exactly as it appears in device manager and tried again. This time windows let me load the driver. It shows up in device manager as 'Sony sa0107 ADB Interface Driver'
HOWEVER, Flashtool is still giving me the same MTP message and if I cmd prompt "adb devices" I get nada.
Is there a way to verify developer mode on the tablet? What else can I try? The tablet gives me a notification when I connect 'usb debugging mode connected, ready to install software'
Thanks!
_sadpanda said:
I went into device manager and found the MTP driver. Also of note, the device ID is: USB\VID_0FCE&PID_5194&REV_0228
HOWEVER, Flashtool is still giving me the same MTP message and if I cmd prompt "adb devices" I get nada.
Thanks!
Click to expand...
Click to collapse
I had a very similar problem in 2014. I do not want to discourage you, but at the end I send it back to sony for a repair. They gave me a new tablet and said that the mainboard was broken.
Nevertheless, there is a thread in Sony cross device general, where people like you end up: http://forum.xda-developers.com/showthread.php?t=1849170
You can try and search for help there, maybe you have more luck then me.
Its odd... ADB was working and stopped after flash. Is this what you had or just no connection from the start?
Sorry, I misread your post. I thought your tablet would not start and you could not get flashmode working. Sorry for that.
What you could try:
1. Be sure you actually activated USB debugging in developer options
2. When you connect the device, you should get a prompt on the tablet to allow usb debugging from that computer
Maybe try "revoke USB debugging authorisations" in developer options and reconnect
3. Install the drivers from flashtool/drivers/ or install sony pc companion. Delete your old driver from device manager.
4. try switching between MTP and MSC mode in usb connectivity menu
Since ADB worked before it was probably no driver problem. Now you cannot be sure. Most probably you tapped away the said prompt of allowing usb debugging when connecting.
If none of this helps I don't know of anything more. Maybe try different usb ports or even computers.... Or try to flash again
bernddi said:
4. try switching between MTP and MSC mode in usb connectivity menu
Click to expand...
Click to collapse
UGH!!! I'm a jacka$$. I totally forgot about that menu/setting. fixed instantly.

Categories

Resources