Related
I need to do the same thing i do with connectify but in my phone, i connect to the web with my wifi and share internet with the same wifi adapter.
i been looking into it for a while and people keep on say that i need 2 widi adapter for it but is SO no true coz i have and use only 1... I don't wanna use bluetooth at all or connect it with usb.
If anybody knows of an app that does this magic please let me know.
Thanks.
Have you tried wifi tether?
Sent from my Galaxy Nexus using Tapatalk 2
@ Luculuc
Thanks for the reply.
I havent find a tethering app that let me share my wifi connection over the same wifi adapter.
I am not looking to share my data plan by the way, Connectify work as a wifi repeater, so you log in to a wifi and the software let you share that same connection any way you like even simultaneously over the same wifi adapter.
I'm sure you have good reasoning, but why don't you connect the other device directly to the same wifi your phone is connecting to? are you trying to use your phone as a range extender?
If that is all you are doing, seems to me to be a waste of a good device.
You could go to dd-wrt.com, find the list of supported routers, then buy a cheap router that is supported and then flash that firmware. Then set up as needed.
I have been using that for years, except in wireless bridge mode.
mmceorange said:
I'm sure you have good reasoning, but why don't you connect the other device directly to the same wifi your phone is connecting to? are you trying to use your phone as a range extender?
If that is all you are doing, seems to me to be a waste of a good device.
You could go to dd-wrt.com, find the list of supported routers, then buy a cheap router that is supported and then flash that firmware. Then set up as needed.
I have been using that for years, except in wireless bridge mode.
Click to expand...
Click to collapse
I know this thread is super old...
one reason i have is open routers that need a login after connection. I have yet to get a repeater to work with one of these networks but connectify works as you connect your computer say yes i accept and then start sharing it.
robb41488 said:
I know this thread is super old...
one reason i have is open routers that need a login after connection. I have yet to get a repeater to work with one of these networks but connectify works as you connect your computer say yes i accept and then start sharing it.
Click to expand...
Click to collapse
You mentioned that the WIFI Repeaters donot work with Open Networks. Are you talking about "Wireless Repeaters and Range Extenders"? such as this one https://www.youtube.com/watch?v=2SQvaGEKOxc
fqrouter2 is the solution
Use fqrouter2 for rooted Android devices and you have a perfectly working WiFi Repeater (available free in Google Play Store)
npg500 said:
Use fqrouter2 for rooted Android devices and you have a perfectly working WiFi Repeater (available free in Google Play Store)
Click to expand...
Click to collapse
thanks a TON...
npg500 said:
Use fqrouter2 for rooted Android devices and you have a perfectly working WiFi Repeater (available free in Google Play Store)
Click to expand...
Click to collapse
Hello npg500, I installed the app you suggested but i am not satisfoed with it.
fqrouter doesnot "externds the range" of the WIFI. it just routes the internet connection though the Android phone it runs on (possibly by the MITM), keeping the routed device on the same network as it was before. i installed fqrouter to increase the signal strength from my Basement wifi. but no success. it shows my PC in the Scan area. but as mentioned it doesn't extends the Range.
Anynody having any idea what App can serve that functionality? Or Am I doing something wrong somewhere?
Anyone can suggest how to work this wifi repeater or extender mode on S5?
fqrouter is saying wifi is not supported on S5 but it does have MITM
Hi guys i see you know sometging about this...basically my neighbours gave my wifi password i typed it on android and i taught to share the connection from phne to laptop..is that possible?
petarzii said:
Hi guys i see you know sometging about this...basically my neighbours gave my wifi password i typed it on android and i taught to share the connection from phne to laptop..is that possible?
Click to expand...
Click to collapse
You can simply view the password from your phone and input it in your laptop. Or, except you are experimenting something.
Am I missing out something?
Hi,
I created ad hoc connection on my Windows 7. But my galaxy s3 can't detect it.
I tried both using Wi-Fi Direct feature, and regular WiFi. But S3 doesn't see that ad-hoc connection.
Why ? Anyone was able to do that ?
Regards,
Pawel
Most Android phones can't see Ad-hoc connections due to limitations (too many issues) in the underlying Linux library and service.
CM9 can see and use it just fine, and there is a fix for most other phones.
Roughly 9% of all computers are capable of running the network card in Host-mode and not only adhoc, so try using Connectify which builds a true Wifi accesspoint.
If it's only to share data between the phone and computer, you can afaik also use the Wifi AP in the phone to connect both.
I've been trying every fix I can find for S3 but everything breaks the Wifi connection, so does anyone know any way to get it working? Because obviously you can setup most routers not to use Ad Hoc but I tried to tether to some Symbian phones but they can only create an Ad Hoc connection.
Because obviously you can setup most routers not to use Ad Hoc
Click to expand...
Click to collapse
Most routers actually WONT use ad-hoc unless specially configured to do so. And many don't even know the concept of mesh networks =)
I tried to tether to some Symbian phones but they can only create an Ad Hoc connection.
Click to expand...
Click to collapse
Test if the following (still) works:
http://acetips.wordpress.com/2011/10/07/reverse-wifi-tethering/
It uses your phone's full-fledged Wifi AP to reverse-tether to another phone.
However it requires a somewhat complicated setup on your Symbian phone which I'm not sure it can handle.
Alternatively you need an extended wpa_supplicant binary to handle ad-hoc.
I'm not sure if any good ones exist, except for CM9. (Which might/will be incompatible with Stock ROM's)
You can use connectify for windows to create connection in the form of Access point
As far as I remember the Nokia N900 is the only one capable of that because it runs on Linux but no version of Symbian can do this because even custom Roms on there consists of basic file swapping and no real system access, and I did used to use Ad-Hoc enabler but that does just kill the Wifi connection now, and they removed that from the market now because they say they updating it hopefully for ICS.
Connectify has one drawback. You can't share 3g/4g connections on the PC, unless you have a premium version.
VirtualRouter doesn't work on my system for unknown reasons. It says service not started, even when it actually is.
I tried VirtualWifiRouter from wwwDOTvirtualwifirouterDOTcom. Seriously good..
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
HcMAX said:
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
Click to expand...
Click to collapse
Is it password protected? If so try making it 'open' or change the encryption type.
Skander1998 said:
Is it password protected? If so try making it 'open' or change the encryption type.
Click to expand...
Click to collapse
Hi,
first thanks for the quick reply,
yes the network is password protected...I changed the encryption type for the WPA not the WPA2 and the problem still persists...
the thing that kills my brains is that, to connect to the bridge I must restart the the access point every morning,....
thanks
Do you have DHCP enabled on the 2nd router?
larryk said:
Do you have DHCP enabled on the 2nd router?
Click to expand...
Click to collapse
yes, I guess so....., should DHCP be enabled or disabled?
sorry but this situation is driving me crazy.....
I cant connect to the brigde/extender network right now with both my android phones and android tablet, however with my laptop running windows 8 I can......
wth??????
this is so frustrating!!!!!
Are you sure the second device extends the main access point and not just create a new WLAN?
Have you updated the firmware of both devices?
What devices do you have?
Am I understanding correctly that your laptop does work even though both Android devices don't (before you reboot the extender)?
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Both have latest firmware? Might be a bug in the WiFi driver of the AP/ROUTER... or it's in Android.... you will need to test by trial and error I guess...
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Dynamic would be the friendliest to work with... you could try if it's a DHCP issue by setting a fixed IP when the problem occurs, but I don't think it is.
This is not a problem with the phone(s)....is with the router config. Contact the manufacturer for further assistance...
HcMAX said:
yes, I guess so....., should DHCP be enabled or disabled?
Click to expand...
Click to collapse
If you got a router and a range extender, there's nothing you need to fiddle with because the range extender will just Relay DHCP requests between client and master router.
Two routers* pushing out IP addresses is a no go, there will be a conflict in your scenario, and all range extenders will of course take this into account.
If you had two "real" routers*, it would still be possible to set everything up, although then there's a lot to take into account.
* Router is a inaccurate term used for the consumer grade combination devices. They're in fact a router, a switch, and a wireless access point bundled in a neat package. Sometimes with a xDSL modem or something on the external interface of the router.
Try setting the IP to static and more important, try giving it a default gateway to the routers IP. That should make it easy for your phone to directly look for the gateway it is looking for.
Sent from my Galaxy S3
I have three routers, one main, one extender, one repeater (creating a whole new network for other building). Both main and repeater are the same network. All is config as per DD-WRT documentation. All three have latest DD-WRT.
After trying many things, all I can say is the (or mine at least) S3 always has trouble when many APs are nearby. I don't use VOIP because of that (it could disconnect at any time).
Next step on my list is to have 3 different SSIDs (only two now) and try using tasker to debounce the wifi switching (if that is even possible).
Hey everyone, I wanted to put together a thread focusing on wifi issues of different variety and what we can do to potentially fix or workaround the main issues
I personally have been working on a solution for the discrepancy that disallows me to connect to my enterprise wifi at work, lollipop and previous versions connect just fine. So far ive found this issue. May not be easiest nor even possible for some of the issues some of us are having, but i think its worth working towards solutions.
https://code.google.com/p/android/i... Owner Summary Stars&groupby=&sort=&id=188867
What wifi issues? You might need nrw router.
I was able to connect via guest, then they had lock it due to bandwidth consumption. I have password since im a supervisor and my other phone (5.1.1) connects just fine. The nexus says saved, but when i click connect nothing, doesnt say obtaining ip or authenticating. Credentials are correct and connected before to same network without lock
meltdeck said:
I was able to connect via guest, then they had lock it due to bandwidth consumption. I have password since im a supervisor and my other phone (5.1.1) connects just fine. The nexus says saved, but when i click connect nothing, doesnt say obtaining ip or authenticating. Credentials are correct and connected before to same network without lock
Click to expand...
Click to collapse
Does your nexus connect fine to other wireless networks? How can you blame it on the device instead of going and fixing your work network settings instead? There are no wifi issues. Call an IT guy and he will fix your router.
meltdeck said:
Hey everyone, I wanted to put together a thread focusing on wifi issues of different variety and what we can do to potentially fix or workaround the main issues
I personally have been working on a solution for the discrepancy that disallows me to connect to my enterprise wifi at work, lollipop and previous versions connect just fine. So far ive found this issue. May not be easiest nor even possible for some of the issues some of us are having, but i think its worth working towards solutions.
https://code.google.com/p/android/i... Owner Summary Stars&groupby=&sort=&id=188867
Click to expand...
Click to collapse
Interesting, I just read through a lot (more than I can believe) of that issue log. It sounds like its technically not a Google/Android 6.0 problem even though the problem arose with the upgrade to 6.0. Have you considered doing what Nick suggested and reaching out to your enterprise IT administrators at work to see if they can or plan to do the necessary updates?
anglerstock said:
Does your nexus connect fine to other wireless networks? How can you blame it on the device instead of going and fixing your work network settings instead? There are no wifi issues. Call an IT guy and he will fix your router.
Click to expand...
Click to collapse
Yeah it connects to others but all devices lollipop and older including iphone and blackberry connect fine. And its known that android m has issues connecting to some wifi that works fine with all other devices. If you do a quick search youll see basically all 6.0 devices (nexus 6, etc) have same issues once updated to 6.0 (hit or miss depends on network they try to connect to, but same story just fine before update). The IT dept are not going to change settings on their network that works fine with 99.9% devices that people have there, since im only one so far with a 6.0 device (IT request MAC address when you get pass) it obviously is some sort of security policy within the os or something of that nature
mlin said:
Interesting, I just read through a lot (more than I can believe) of that issue log. It sounds like its technically not a Google/Android 6.0 problem even though the problem arose with the upgrade to 6.0. Have you considered doing what Nick suggested and reaching out to your enterprise IT administrators at work to see if they can or plan to do the necessary updates?
Click to expand...
Click to collapse
Yeah, they are hesitant to change what works for almost everyone that connects to it. Also i think itd be a good thing to work on since most IT admin wont change for the very few with newer devices
On a side note i do feel like its more or less a cop out of them to claim its not 6.0 fault because when push comes to shove it works fine but once 6.0 it doesn't and nothing changed on the network
When I had my Nexus 5X, I had issues connecting to WiFi at home until I used the Network Settings Reset option under Settings > Backup and Reset. I think this issue came from the restore of settings during initial setup. Possibly worth a try.
Still, the issue I'm running into now is that my 6P only connects to one of the two routers at home. I have both broadcasting the same SSID though they're different brands and one's an older G router. On my Moto X running 5.1, the phone would connect to the strongest signal. Seems the 6P will only connect to one and never connect to the other. I've had the phone "forget" that one and connected to the other and then it refused to connect to the original. Very odd.
My point in saying this is that I wonder if there's a similar issue occurring in the OP's office. Though the same SSID is being broadcast, its as if the phone remembers the MAC address of the specific router it originally connected to and refuses to connect to any others. Just a thought.
Sent from my Nexus 6P using Tapatalk
Have you tried turning on developer options, scroll down and turn on legacy dhcp client under networking.
Yeah, ive tried that also
the fix in this thread might work, if you're rooted.
http://forum.xda-developers.com/google-nexus-5/help/android-m-wpa-enterprise-ssl-problem-t3219559
tcchuin said:
the fix in this thread might work, if you're rooted.
http://forum.xda-developers.com/google-nexus-5/help/android-m-wpa-enterprise-ssl-problem-t3219559
Click to expand...
Click to collapse
Just tried and sadly it didnt work
Tell the IT dept to upgrade their radius auth
I'm also having WiFi connection issues with eduroam (an often used protocol in UK universities) amongst other including my home dual band ac network. It locks out and can only be resolved by a reboot, which then takes 30-60 seconds to power off. Not normal or 'just an admin' issue. It seems to be software related as it is not constant nor predictable (ie it's not in certain areas and a reboot always reconnects). I'm unconvinced by the 'speak to your network admin' argument as it is neither useful or realistic and incompatible on my current patterns of usage or the issues being reported more widely.
My 6p works fine on my wi-fi router at home, but when I go over to my son's house, I have to go into Advanced Wi-Fi options and change the frequency band from automatic to 2.4 GHz only. Then I have to cycle my wi-fi off and back on. Then it will work on his router. Otherwise, it with keep trying to connect and fail every time.
Rob
Yeah, these are the issues (including the issue im having) that im talking about. Theres clearly issues with wifi on 6.0. Its not an issue with the hardware, nor is the solution "buy a new router" or "must be the settings on your companys network" granted most people can connect everywhere they've tried but if they tried where we cant connect or have issues they'd have same problem. Im thinking its a problem due to security policies or something along those lines but we should be able to alter, remove, or opt out of them at our own risk. Just thinking out loud.
Which build are you on? Mine ends in k. See: http://forum.xda-developers.com/showthread.php?t=3248499
Samsung Galaxy S10e, Android 10 stock.
I am currently a patient at an acute care facility and I use the public Wi-Fi here. Recently, changes were made to the Wi-Fi here, I understand that a new router was installed. Since then, I have been trying to access the Wi-Fi with the correct password, but I get a message that sign in is required and when I click it, I am forwarded to a page that does not load. If I select the menu option to use network as is, I seem to be connected but have no access.
In the past, when accessing this Wi-Fi, I was forwarded to a web page where I had to click a button, and then got access. That page has been gone for quite some time now and the Wi-Fi connected without any issues
Others accessing the Wi-Fi do not seem to have this issue. I tried numerous things to fix this issue, such as deleting the Wi-Fi connection and re-enabling it and resetting the network connection. The only thing that I found that resolves this issue is turning off the randomization of the MAC address and setting it to use the phone Mac address.
For privacy reasons, I would prefer to use the randomized MAC address. If for some reason my phone is being blocked on this network, which is the only thing I can think of, in my limited knowledge of how this works, it would seem my phone Mac address would it be blocked but not a randomized MAC address, because it changes.
My old Galaxy S4 running CyanogenMod Android 6 connects to the Wi-Fi fine, but I don't believe the MAC address is randomized on Android 6, if this is the reason, though this seems unlikely to me as every newer phone would have an issue, since they randomize the MAC address by default
Can anyone supply me any info on this?
@rsngfrce
If the randomized MAC address ( e.g. 32:8c:27:26:72:34 ) doesn't contain the original OEM code in its first 6 hex-numbers you might face a lot of authentication issue.
jwoegerbauer said:
@rsngfrce
If the randomized MAC address ( e.g. 32:8c:27:26:72:34 ) doesn't contain the original OEM code in its first 6 hex-numbers you might face a lot of authentication issue.
Click to expand...
Click to collapse
Thanks for your reply. The phone is doing the randomizing as a function of Android and I would have to assume that it would maintain the original OEM code in its first six hex-numbers if this is required (and I have read about that issue). I never had this issue until the new router was installed and I am unaware of anyone else having an issue.