Related
In short, I am extremely disappointed in this case and feel ripped off for having to paying $30 for a case that is worth, at MOST $5.​Pictures: http://imgur.com/a/jYJuw#0
Pros:
Visually attractive at a glance.
Buttons do work.
Case leaves enough room for large headphone plugs to fit with ease.
Although I do not have a magnetic charger, there appears to be plenty of room for it to fit as long as the adapter isn't too wide.
Cons:
Bumper is plastic and very flimsy. I fully except it to shatter if my phone is ever dropped.
Extremely overpriced for the quality of case provided.
Buttons feel cheap (I can't believe they are metal), are loosely fitted, meaning they rattle when phone is shook.
The part of the bumper closest to the screen that surrounds the USB port and magnetic charger is very very fragile and can be moved almost to the point of snapping without much effort.
After picking up my T-Mobile Z3 on Wednesday I quickly went online to find a case to protect my phone. I was very much disappointed to find that there are hardly any quality cases available, especially in the US. After researching a bit, it seemed like Case-Mate was the best option there was and I put in an order for the Slim Tough.
My case came today (Saturday) and after using it for a few hours I have written this review.
If you have any questions, please ask.
ChristianBale said:
In short, I am extremely disappointed in this case and feel ripped off for having to paying $30 for a case that is worth, at MOST $5.​Pictures: http://imgur.com/a/jYJuw#0
Pros:
Visually attractive at a glance.
Buttons do work.
Case leaves enough room for large headphone plugs to fit with ease.
Although I do not have a magnetic charger, there appears to be plenty of room for it to fit as long as the adapter isn't too wide.
Cons:
Bumper is plastic and very flimsy. I fully except it to shatter if my phone is ever dropped.
Extremely overpriced for the quality of case provided.
Buttons feel cheap (I can't believe they are metal), are loosely fitted, meaning they rattle when phone is shook.
The part of the bumper closest to the screen that surrounds the USB port and magnetic charger is very very fragile and can be moved almost to the point of snapping without much effort.
After picking up my T-Mobile Z3 on Wednesday I quickly went online to find a case to protect my phone. I was very much disappointed to find that there are hardly any quality cases available, especially in the US. After researching a bit, it seemed like Case-Mate was the best option there was and I put in an order for the Slim Tough.
My case came today (Saturday) and after using it for a few hours I have written this review.
If you have any questions, please ask.
Click to expand...
Click to collapse
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
dsf767 said:
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
Click to expand...
Click to collapse
I actually do not have the Ringke Fusion so I cannot make a proper comparison.
I do know that the rubber TPU on this case is the best part and offers good protection against scratches and light bumps. It also would offer the most protection against a drop as it would absorb most of the impact. The bumper (which keeps the TPU on), on the other hand, will offer no protection and will likely shatter or break upon impact.
dsf767 said:
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
Click to expand...
Click to collapse
I agree, I'm sometimes hard on my devices. This looked like possibly a replacement for the Otterbox Commuter I used on another phone - thin and durable. Still looking for something similar.
ebern220 said:
I agree, I'm sometimes hard on my devices. This looked like possibly a replacement for the Otterbox Commuter I used on another phone - thin and durable. Still looking for something similar.
Click to expand...
Click to collapse
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
dsf767 said:
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
Click to expand...
Click to collapse
Can you take some ringke fusion pics of the case on your xperia, if you can
Sent from my D6616 using Tapatalk
dsf767 said:
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
Click to expand...
Click to collapse
Remember to give us your thoughts on the case!
Look like is ok, any photo is install on your mobilr?
spacegreyphone said:
Look like is ok, any photo is install on your mobilr?
Click to expand...
Click to collapse
Right here: http://imgur.com/a/jYJuw#0
ChristianBale said:
Remember to give us your thoughts on the case!
Click to expand...
Click to collapse
I have to say I feel nearly the same as Christian, Looking at it it does look like a nice case but digging deeper you find some issues.
The buttons are extremely cheap and do rattle and have no clickyness to them what so ever. the plastic bumper does feel flimsy but I don't think it would crack if dropped because of the TPU behind it. However I think if you took the case off the wrong way and bent it it could easily crack. I also don't like the bulkyness it added to the width of the phone. Before I was using the case (and even with the Rinke Fusion the phone felt nice in the hand but now with the case it feels overly wide.
It does with with the Nilkin Tempered Glass Screen Protector (Barely) which is nice and I have a feeling will work with my magnetic connector (will test when I get home.
Overall I think I like it a little better then Christian and will use it over my Rinke Fusion (because I feel it has better protection) I will still be on the lookout for another case which after spending as much as I did on the case-mate is disappointing.
Overall I give it a 5/10
Well unfortunately this case is completely dead for me as it does not work with the magnetic charger port even with the cutout so back to the Rinke for me.
Where did you get the case from online? It's temporarily unavailable on Casemate's website and I can't find it anywhere else besides MobileFun (whose shipping is ridiculous)
Ebay matey.
But i'm form the UK, so it may well differ for you.
laujla said:
Where did you get the case from online? It's temporarily unavailable on Casemate's website and I can't find it anywhere else besides MobileFun (whose shipping is ridiculous)
Click to expand...
Click to collapse
I got mine from the US Caste Mate store.
I just bought mine today at one of the sony stores here in Malaysia. I have to agree with what Christian has pointed out. The buttons feel cheap and it has the loose sound which makes it feel cheap despite the price of it. I am a fan of Spigen casing because of the hybrid colors and full protection in all corners and this case mate slim tough is the closest fit I found to Spigen. But having it on can't fit into my magnetic charging dock without removing the cover which I think it will break some day.. Now I just remove the dock holder and did some DIY card board to charge it with the casing on
I guess I will switch to Ringke Fusion soon and let my 90 bucks burns.. Ouch..
---------- Post added at 05:29 PM ---------- Previous post was at 05:21 PM ----------
Btw, I decided to sell it out, who wants it can PM me. Thanks
The un symetrical looking back just bothers me. I am waiting for Spigen to give some Z3 love.
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
ScoobSTi said:
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
Click to expand...
Click to collapse
I have that installed on my ipad. Looks pretty cool and would protect from scratches. Does nothing to protect from drop damage etc. Its got some texture to it so it makes it easier to grip. Three year old is watching videos on it right now. When he's done I will post a pic of it.
Well there is a crappy pic for now. Lol I have never taken it off so I don't know of it leaves a mess on the device after removal. But it has taken more than its share of abuse and is still in tact. No holes or wear and tear. And that's after three years of use. Btw the dark spot you see is water.... As my son had spilled some on the table evidently.. Lol
Here is an angle shot so you can see the texture.
Moody66 said:
Here is an angle shot so you can see the texture.
Click to expand...
Click to collapse
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
ScoobSTi said:
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Click to expand...
Click to collapse
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
divineBliss said:
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
Click to expand...
Click to collapse
If I get it I'll decide when I apply it.
Moody66 said:
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
Click to expand...
Click to collapse
Moody66 said:
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Click to expand...
Click to collapse
divineBliss said:
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
Click to expand...
Click to collapse
Thanks! :good:
I doubt any case will work if you use the shield. Its very thick. That's why the iPad and touchpad are not in cases. It adds a surprising amount of bulk. I know it will not work with the trident at all. Nor the gell cases. Matter of fact the trident case wouldn't even let it start to slide in. It's designed to be a stand alone protection. But there isn't any real use in putting this on then a case over the top of it anyway.
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Not
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Not many cases available for these ham2s. Used one on an iPhone and went through 7 cases before I could find one that fit. And it was a soft rubber one that would stretch. Crapola made. Company is always going to tell u cases may fit. Lol they want to sell product. When the wife gets home i will show a picture of hers with a case attempt... Not a pretty site.
TPU for HAM2 by Mooncase from Amazon fits perfectly. $5.99 shipped from China or Amazon prime. Read the reviews and stay away from crappie stuff.
If it fits good now it won't with armour on it... Been there done that.
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Moody66 said:
If it fits good now it won't with armour on it... Been there done that.
Click to expand...
Click to collapse
Order placed, should be here a week from today. It'd be quite redundant to have the skin on and a case on as well, so I might go with just the skin if it's grippy enough. Will definitely post pics and a small review or something.
Skin came in a few days early. :good: Was annoying to put on the edges but here are some pics.
I messed up around the USB port lol.
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
divineBliss said:
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
Click to expand...
Click to collapse
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
ScoobSTi said:
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
Click to expand...
Click to collapse
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
divineBliss said:
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
Click to expand...
Click to collapse
Just a hard back shell. I doubt the Cyclops would fit.
I always wanted to get a tempered glass screen protector but I didn't. Next time lol. Not sure, but I think @superbass311 said he had one?
Looking everywhere can't find one. See there are a couple that look very bulky and come with a screen protector built it. And almost all others come attached with the front face cover and magnet closed case which I don't want.
Thanks in advance
I never found any. I just left mine without a case, just have a glass screen protector on it.
I wanted a snap-on thin case as well. So.... I just exacto'd the front cover/flap off a cheap magnetic case from Amazon. I'm a complete klutz, hence having at least a little protection is important to me.
I also wish a company would take advantage of the magnetic side slots & make a front cover similar the Nvidia factory built cover. I'd love to buy the Nvidia one for my graphic design work since, like gaming, it heats the device up - so I always remove the back cover.
https://smile.amazon.com/NVIDIA-SHI...TF8&qid=1475445263&sr=8-10&keywords=shield+k1
https://smile.amazon.com/NVIDIA-SHI...rd_wg=OoPfb&psc=1&refRID=WRED20TMP2KCNZ3BR5WZ
Those are not simple snap on cases... besides that one's ugly, if you plan on getting something like that, get the other Poetic one.
gqukyo said:
Those are not simple snap on cases... besides that one's ugly, if you plan on getting something like that, get the other Poetic one.
Click to expand...
Click to collapse
Closest to a protective case you can get that is minimal.
Cases like that are not to be considered minimal at all. What equi did would be closer than your suggestion. This tab is just not that popular so case manufacturers just don't bother with it. Sucks for us who want more options.
---------- Post added at 10:06 PM ---------- Previous post was at 09:39 PM ----------
Btw, I just tried what equi did for one of the cases for my Zenpad Z8 and it's actually not bad. While it won't protect from scratches on one side, it never protected against drops for that side before anyways.
I was in the same position as you. I wanted a simple case with good protection that wasnt bulky. I also didnt want a flap. I couldnt find anything that fit the bill. Therefore i settled for this. I use the Fintie Nvidia Shield K1 Smartshell case from Amazon and love it. It snaps on really easily and has a front flap that doubles as a stand. I hardly even realize the flap is there as it easliy flips behind the screen or folds so it can standup I have actually found it to be more of a conveniece than inconvenience. It only $10.99 too! It provides pretty good protect as well. My 13 year old son is pretty rough on stuff and so far we have had no problems. I highly recommend it with an intelliarmor screen protector. Hope this helps.
Has anyone found an ultra thin case like a Calicase or Peel?
so far i can't find one. i loved the offical LG case for the nexus 5x. it was basically a cover for the back and had cutout on the bottom. all i want is to protect the back from scuffs. don't need a big case.
I'm holding out for the Ringke Slim to come out for the Pixel. It's been a perfect slim case for my old Nexus 5, Nexus 5X, and then the 6P.
I'll be using the Pleson TPU case in the mean time.
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
d-pak said:
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
Click to expand...
Click to collapse
the Pleson one is one of my favorites! here it is on my pixel
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
daewond3r said:
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
Click to expand...
Click to collapse
I just popped it out and back in to see and no it didn't seem to be too tight. I don't believe this is a concern. The edges of the case are also rounded and have a soft matte type of finish.
Good case option from Amazon
If you need a quick case at a good price, try this one out. I ordered it in advance. It isn't that special but does the basics. I think it is slim, but not ultra slim. Check it out until more cases hit the market. Different colors and styles are available.
Search amazon for this name and brand. $7.99 shipped:
Google Pixel Case, DGtle [Shock Absorbent] Anti-Scratches TPU Gel Premium Slim Flexible Soft Bumper Rubber Protective Case Cover for Google Pixel (Smoke Black)
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
what you guys are listing and talking about are thin cases, OP is looking for ultra thin cases, like the orzly flexslim series:
http://orzly.com/products/flexi-slim
I hoping they will come out with one for the pixel too, these are really just for scratch protection and will offer literally no drop protection, its similar to having a slim on your phone but more flexibility as you can just put it on and take it off easily.
---------- Post added at 10:58 PM ---------- Previous post was at 10:57 PM ----------
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
Could you post a few more pics? I'm thinking of ordering this case too.
Thanks!
i'm hoping to go with just a bumper case around the outer edge, because this phone is a beauty and i dont want to cover it up! that said, if i did get a full case and wanted to keep it relatively slim, i'm probably go with the diztronic matte slim case. i have one on my 5x, and it's been not only great at protecting on minor falls and bumps, but has held up extremely well over time. couldn't say enough about that case. looks like amazon currently has it available for purchase, but it's not shipping until 11/4.
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
Are the edges the same color as the back (a matte black)? or are they glossy?
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
I was interested until I read some reviews stating that it's thick
Sent from my Pixel using XDA Labs
Spigen Case
FoleyRose said:
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
MNMichael said:
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
Click to expand...
Click to collapse
Thanks for the suggestion, but that's actually exactly the case I have on right now. What I meant was a case with open top, open bottom and open buttons. But not clear.
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Sent from my Pixel using XDA Labs
the tree said:
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Click to expand...
Click to collapse
Bingo bingo. People don't seem to get it. I settled for the maxboost also but it looks like decent space between the camera and the case worrying me. Calicase and peel are the leaders IMHO in this thin case space. Just no love for the pixel.
charklos said:
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Click to expand...
Click to collapse
Thanks for confirming. I was hoping for the ultra thin tpu. Can you add some pictures of it after the wool treatment?
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I bought this https://www.amazon.com/gp/product/B06XH1PWX9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and really like it. It is slim enough for me and has great phone protection.
I've ordered this one. Clear and thin.
https://www.amazon.com/Trianium-Res...d=1493470061&sr=1-1&keywords=trianium+s8+case
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
the thinnest case would be ones made out of polypropylene. some of them get as thin as PAPER. others get thicker/harder plastic feel, but no real point as any drops will crack your glass...
I always buy TPU thermo polyurethane which is very resilient and i've been surprised a few times on how it protected my phones. the thinnest TPU i found are the CIMO
https://www.amazon.com/Galaxy-Cimo-...011&ie=UTF8&qid=1493474636&sr=8-5&keywords=s8
I have the Spigen which is too thick, back side measuring 1.4mm on my calipers
EasyAcc TPU which i'm rocking right now which is 1.3mm
Cimo which hasn't come in yet, but... I've had them for s6 and s7 and it only measures 1mm
I like to cut a small hole and mod the TPU cases so that it works on my modded magnetic charger.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
AdamIsYou said:
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
Click to expand...
Click to collapse
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
arampapaz said:
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
Click to expand...
Click to collapse
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
SptMogul said:
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
Click to expand...
Click to collapse
Loving it so far. It is a bit slippery though, not like other TPU cases I have which provide more grip. The separation between the camera and fingerprint scanner is a nice touch too. I'm guessing it is made from some sort of TPU., it is soft and flexible but not silicone. Be aware this is very light protection. I just wanted something to prevent scratches caused by everyday use. I was going to go naked, but this is pretty close and gives some protection.
I'm loving the new spidgen neo hybrid case
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
ElBeaner said:
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
hejay said:
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
Click to expand...
Click to collapse
They're now available on Amazon with prime shipping
Still rocking this case and love it
kz121 said:
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
Click to expand...
Click to collapse
Could you tell me how much it weighs? Amazon lists 1.4 ounces for both item and shipping weight. That's way to heavy for me.
ElBeaner said:
They're now available on Amazon with prime shipping
Still rocking this case and love it
Click to expand...
Click to collapse
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
i bought this
https://kase.com/collections/s8
hejay said:
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
Click to expand...
Click to collapse
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice. It has a small lip at front to protect the screen?
Vogal said:
Looks nice. It has a small lip at front to protect the screen?
Click to expand...
Click to collapse
No Protection with this case. It clearly says in description only for scratch. If you want full protection I would suggest that you get this one from Samsung is very slim:
https://www.amazon.com/gp/product/B06XHWHYLV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bets case I ever had
Spigen Thin Fit Galaxy S8: https://www.amazon.com/gp/product/B...54BCW&linkId=325db0677b883d6c92a8d1a83ac09792
Spigen Thin Fit Galaxy S8 Plus : https://www.amazon.com/gp/product/B...4LGHJ&linkId=22db5b6f758a85f0a88aaa7787bd29bb
ElBeaner said:
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
Click to expand...
Click to collapse
How is the grip
---------- Post added at 05:05 AM ---------- Previous post was at 04:49 AM ----------
Does the olixar flexishield actually have something special for grip? They say it's a non slip coating but is it any different than regular tpu