CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
PreReqs: Unlocked Bootloader
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 2 I605, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=i605
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Change log http://changelog.bbqdroid.org/#/i605/next
Source http://github.com/CyanogenMod
I just got on the 11/8 version lol. Thank you for this. Time to dirty flash.
Edit confirm camera working here
Sent from my SCH-I605 using Tapatalk 2
If I flash this will I be stuck 4.4 or can I go back to my 4.3 driver?
Dvanzutphenkann said:
If I flash this will I be stuck 4.4 or can I go back to my 4.3 driver?
Click to expand...
Click to collapse
Just make a full backup first
sbrissen said:
Just make a full backup first
Click to expand...
Click to collapse
I've got like 4 back ups thanks man. Just don't want to miss out on see what all the buzz is about with touchwiz 4.3 later this month but my heart is in aosp and moving to kit kat now thanks again
Can you please also update the bugs list with
Holding home button doesn't open recents
Proximity sensor not working (or didn't in previous builds)
I switched back to CM10.2 for now but am looking forward to CM11 when some bugs are fixed.
For me I had no data aside from WiFi all the other bugs are tiny and will be fixed but I'm leaving for work soon so I had to restore back up, looking good though guys thanks for the work. :good:
If you don't install the ROM using the latest version of CWM you won't have data. Not sure why it doesn't work through TWRP.
Hope that helps.
Dvanzutphenkann said:
For me I had no data aside from WiFi all the other bugs are tiny and will be fixed but I'm leaving for work soon so I had to restore back up, looking good though guys thanks for the work. :good:
Click to expand...
Click to collapse
Did you flash with Cwm?
Sent from my SCH-I605 using Tapatalk
draco259 said:
Did you flash with Cwm?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
No Sir but I never have so that wasn'ta issue before but what do i know. Thanks for the suggestion
Dvanzutphenkann said:
No Sir but I never have so that wasn'ta issue before but what do i know. Thanks for the suggestion
Click to expand...
Click to collapse
there are definitely issues flashing 4.4 in twrp at the moment
sbrissen said:
there are definitely issues flashing 4.4 in twrp at the moment
Click to expand...
Click to collapse
Off to work here in a few but I'll be switching to cwm touch version on Thursday as I have a long weekend to play with this beauty. Thanks again fellas
---------- Post added at 04:49 PM ---------- Previous post was at 04:27 PM ----------
Installed cwm touch just wish I had the time to play with it
Snapchat video working?
Sent from my SCH-I605 using Tapatalk
Has anyone noticed that there is no lte during a phone call? I've Bern able to talk and surf on tw or any other aosp roms
Sent from my SCH-I605 using xda app-developers app
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
BennyJr said:
Snapchat video working?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Yes but that was snapchat's problem.
poontab said:
Yes but that was snapchat's problem.
Click to expand...
Click to collapse
Oh word? Thanks
Sent from my SCH-I605 using Tapatalk
There seems to be a nasty sound bug when music is playing and you turn your screen off and on and unlock it. Fixed it by disabling lock sounds under sounds menu and changing screen lock to pattern. Not complaining just trying to save some ears because the sound it makes is pretty terrible haha. Great work so far sbrissen if it wasn't for you I probably wouldn't even still have my note 2!
Sent from my SCH-I605 using XDA Premium 4 mobile app
AngryManMLS said:
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
Click to expand...
Click to collapse
Thanks for this! Where can or if even is twp able to flash 4.4 yet? You have a zip installer by any chance if it is updated. I have seen people talk about it but their website does not show the new one (2.6.3.1 I believe?)
AngryManMLS said:
For now to flash this and have working data you need to be on the latest ClockworkMod. Thankfully I have updated zip installer versions for both the standard and touch versions of 6.0.4.3. You can flash it in TWRP and within a reboot be right in CWM.
http://forum.xda-developers.com/showpost.php?p=47371856&postcount=148
Hope this helps out!
Click to expand...
Click to collapse
Awesome now I don't have to search for this! Was gonna thank you but used my last 2 for the day for your 4.3 TW port then sbrissen when I came across this. Been watching for this just sucks don't have time to flash it tonight. Sbrissen you are a god among men! Great work can't wait to try this!
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Hey guys, so after a few days of work, ive gotten a build of cm-10.2 booted. Please keep in mind that this is a WIP and there may be some things broken.
Whats changed from 4.2?
http://www.funkyandroid.com/aosp-JDQ39-JSS15J.html
Click to expand...
Click to collapse
Whats working?
Touchscreen
Wifi
Bluetooth
GPS
Storage
Recovery
FM Radio
Click to expand...
Click to collapse
Whats not working?
Back facing camera. Panorama mode does work, however.
Click to expand...
Click to collapse
Source
Device: https://github.com/iurnait/android_device_samsung_venturi/
Kernel: https://github.com/iurnait/android_kernel_samsung_venturi/
Click to expand...
Click to collapse
Thanks to:
@android1234567
@JackpotClavin
@Mevordel
@zaclimon
Installation instructions:
Please note that if you are on a GB rom and you get a status 7 assert error when trying to flash this rom, first flash a cm9 rom, power off the device, and boot into recovery again.
Click to expand...
Click to collapse
Download rom and gapps (and us kernel zip if necessary)
reboot into recovery
MAKE A BACKUP
wipe data, cache, dalvik cache
under mounts and storage, wipe /system and /system_app
flash rom
flash gapps
(flash us kernel zip)
reboot and enjoy
If you are updating from a previous build of cm-10.2, please wipe cache and dalvik
Downloads
Current recommended build (M1 Snapshot)
ROM: cm-10.2-20131105-UNOFFICIAL-venturi.zip - 155.03 MB
US Kernel: pac_venturiusa_kernel-nov4.zip - 5.26 MB
Gapps: http://d-h.st/users/ZordanKV/?fld_id=22749#files
Click to expand...
Click to collapse
Previous version
Rom:cm-10.2-20130911-UNOFFICIAL-venturi.zip - 167.52 MB
Gapps: http://forum.xda-developers.com/showthread.php?t=2012857
US Kernel: cm-10.2-USA-Kernel-REV3.zip - 5.09 MB
Click to expand...
Click to collapse
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
This is is destined for epic-icity. :laugh:
I always chuckle when I see this- * you point the finger at me for messing up your device, I will laugh at you.
JackpotClavin said:
Check out my github in the device folder, I've got the storage working with some fstab magic
Sent from my DROID RAZR M using xda app-developers app
Click to expand...
Click to collapse
I wish I could give you over 9000 thanks.
You is awesome
That didn't take long.
Build uploaded. This includes the INTL kernel; a US kernel is building right now. AFAIK, this rom currently wont work with other custom kernels. check second post for flashing instructions and keep in mind that this is a beta build, so things may go wrong.
Everything seems okay, I just cant get root access
An1mus said:
Everything seems okay, I just cant get root access
Click to expand...
Click to collapse
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
iurnait said:
Issue is addressed in the OP. Use SuperSU.
Sent from my YP-G70 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
An1mus said:
Hmm it's telling me that the binary failed to ,so still no SU
I'll just wait I guess
Click to expand...
Click to collapse
flash this: http://download.chainfire.eu/supersu
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
check op
Can't wait to flash this ROM!
Sent from my YP-G70 using xda app-developers app
iurnait said:
Ive uploaded a new build that should fix superuser and has a few more changes from Mevordel that I had forgotten to merge. Ive also changed the link to the gapps package to a more comprehensive zip, so it is best to do a full wipe if coming from the build earlier today to avoid duplicate apps showing up.
ROM:
http://d-h.st/38D
GAPPS:
gapps-jb-20130729.zip - 80.91 MB
US Kernel (new version):
uploading
Click to expand...
Click to collapse
And there go our chances of getting rid of the extra partition hack by using a smaller gapps package
Sent from my Galaxy Nexus
The ROM boots up fine. Scrolling and going into the app drawer has a huge drop in frame. Doesn't matter if it's trebuchet or Nova, still very laggy when scrolling. Other than, the ROM is great
Great job getting 4.3 to work Keep up the good work!
I noticed that scrolling in general on the web browser, Facebook,etc has a drop in frames.
sultan kernel
can i flash the sultan kernel?
angelos208 said:
can i flash the sultan kernel?
Click to expand...
Click to collapse
No. Wait for r6 of his kernel.
iurnait said:
No. Wait for r6 of his kernel.
Click to expand...
Click to collapse
ok man thanks! tou rock! im your bigest fan!
Hmm, any kernel repo with commits I should add to the kernel to boot it on 4.3?
4.3 probably changes nothing here on yp-g70 but still I would like to test it
Wysłane z mojego Nexus S za pomocą Tapatalk 4
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Gapps : Here
build 1: Here
build 2: Here
Latest build: Here
Installation
- First time flashing CM10.2 to your Galaxy S (or coming from another ROM)?
Reboot into Recovery using 3-button-combo
Do a Nandroid backup! (optional but safer)
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM and Gapps
Working
Everything else other than specified below
Not working
Data
Build 4
Modified to use nexus modem
Build 2/3
Everything works except data
20130804
Initial release
Special Thanks
Pawtip Bbelos Derteufel and Bdogg
Necessary
Want to help make 4.3 stable checkout my github
Eager to try this one. The first 4.3 rom for us. Downloading now. Will flash and let u know.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
Eager to try this one. The first 4.3 rom for us. Downloading now. Will flash and let u know.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Make sure you have odin in case its not functional. After many test with bdogg it may be functional we had sdcard issues surely solved and signal issues which may be an existing problem.
Everything went well installing the rom. It feels snappier too. But I found out I lost root. Tried installing supersu too but dint succeed. So had to revert back to carbon.
Want to be back on 4.3 as soon as possible cos it seems good.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
Everything went well installing the rom. It feels snappier too. But I found out I lost root. Tried installing supersu too but dint succeed. So had to revert back to carbon.
Want to be back on 4.3 as soon as possible cos it seems good.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
looks like they just fixed it does signal show up? I wouldnt mind doing a build going to let cm finish up some stuff
omg I cant take it been watching the conjuring its no joke
I could check only Wifi and could make calls. Dint check bluetooth. Couldn't check 3g either as I have to edit the build.prop to get it working on my network and that was not possible as I had no root access.
Sent from my SCH-I500 using xda app-developers app
swapnilss said:
I could check only Wifi and could make calls. Dint check bluetooth. Couldn't check 3g either as I have to edit the build.prop to get it working on my network and that was not possible as I had no root access.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Im running the new build its almost done hope it works
takes like 30 mins to upload
How about the bootsplash did it show teamregular?
Uploading now
Updated Op for new build incase im sleep when it uploads
if its no go check here for build 2 http://goo.im/devs/Unjust/Fascinate/CM-10.2/
Yes it did show team regular
Sent from my Nexus 7 using xda app-developers app
swapnilss said:
Yes it did show team regular
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks
udev, have you thought about being an official CM maintainer? lol
but i will be watching this ROM's development. i'm on freaking stock right now (2.3.5) and waiting for a stable build of 4.3.
there's been a ton of hype about 4.3 being nicer and faster than 4.2, which was honestly crap on the fascinate. i ran cm10.1 for quite a while, but the phone never really had enough ram, and almost everything lagged.
skepticmisfit said:
udev, have you thought about being an official CM maintainer? lol
but i will be watching this ROM's development. i'm on freaking stock right now (2.3.5) and waiting for a stable build of 4.3.
there's been a ton of hype about 4.3 being nicer and faster than 4.2, which was honestly crap on the fascinate. i ran cm10.1 for quite a while, but the phone never really had enough ram, and almost everything lagged.
Click to expand...
Click to collapse
You cant get anywhere without devil kernel which gives you more ram with bigmem enabled. I cant be official I only did this because I thought Jt (official maintainer) would soon have the fascinate ready for 4.3. My kernel does have devil in it I changed it a bit from the original creator DerTeufel.
CyanogenMod 10.2 (Android 4.3) preview build:
Working:
Phone --- SMS --- WIFi --- Bluetooth --- Storage
Not Working
Data --- MMS --- Superuser
I will edit the more I dig in and play around. Dont forget to thank U Dev for his hard work in helping getting this out so soon. Oh yeah...and me for my tiny lil contributioins and for bricking my phone several times to help with testing...lol
Flashed the build 2, no root access again. So I flashed the supersu cwm flashable for 4.3 and gained root. But no 3g data yet. All settings which are required for setting up data connection with my service provider has been done but still no connectivity.
Sent from my Nexus 7 (CLEAN ROM 4) using xda app-developers app
swapnilss said:
Flashed the build 2, no root access again. So I flashed the supersu cwm flashable for 4.3 and gained root. But no 3g data yet. All settings which are required for setting up data connection with my service provider has been done but still no connectivity.
Sent from my Nexus 7 (CLEAN ROM 4) using xda app-developers app
Click to expand...
Click to collapse
To let you know my source is good Im waiting on pawtip and others to fix that issue. Its the rom source older devices lost support but I will let you know when I find other things thanks for testing
Uploaded Build 3
Much excite, flashing now on dev (no carrier) device. Any idea if trim is functional?
AaronCompNetSys said:
Much excite, flashing now on dev (no carrier) device. Any idea if trim is functional?
Click to expand...
Click to collapse
nope my phone is broke but pawtip added it just in case it is. Enjoy
New kernel with improved bootlogo in a while
Unjustified Dev said:
New kernel with improved bootlogo in a while
Click to expand...
Click to collapse
dude you've made literally 3 builds in one day, counting this one. you are my hero.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Galaxy Note 2 I605, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Read known issues ans FAQs
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
DOWNLOADS
CM10.2 official nightly builds:
http://www.get.cm/?device=i605
Google Apps:
http://goo.im/gapps
CHANGELOG
http://changelog.bbqdroid.org/#i605/cm10.2/next
BUG LIST
-GPS: To get a lock using the new opensource gps use the workaround provided by Kejar: http://forum.xda-developers.com/showpost.php?p=39761558&postcount=702
-BT Voice Search
-5ghz wifi - seems to only work with low channels
-Minor graphical issues (occasional black screen)
TEAMHACKSUNG SUPPORT CHAT
Webchat: http://webchat.freenode.net/?channel...cksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Thanks. Finally official.
来自 SCH-I605 上的 Tapatalk 4
Looking forward to tonight thank you
Sent from my GT-N8013 using Tapatalk 4
awesomee
Sent from my SCH-I605 using xda premium 2 beta
Running 4.3 on my nexus tablet so i am excited to get up to 4.3 on my phone as well.
Is the option to turn off the back lights still not in this build?
I'm so ready for this.
Really glad to be having the N2 staying up to date. Have this on my N7-2, and girlfriend's new S4, was getting jealous.
I only see 10.1 on the link provided
http://www.get.cm/?device=i605
mikeone33 said:
I only see 10.1 on the link provided
http://www.get.cm/?device=i605
Click to expand...
Click to collapse
8/15 isn't ready yet. It'll show up tonight or tomorrow.
I'll go ahead and ask it, I see the OP says use Cloxkworkmod. Does that mean TWRP is out of the question?
Sent from my SCH-I605 using xda app-developers app
mikelikesbikes said:
I'll go ahead and ask it, I see the OP says use Cloxkworkmod. Does that mean TWRP is out of the question?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Twrp should work fine using the latest version.
I haven't had any issues using it.
Sent from my SCH-I605 using Tapatalk 4
The factory reset is done after the rom and gapps are installed?
Sent from my Carbon 1.8 Note II using XDA DEV
Thanks for getting this up so fast! Can't wait to be on nightlies
Sent from my SCH-I605 using Tapatalk 4
veloct said:
The factory reset is done after the rom and gapps are installed?
Sent from my Carbon 1.8 Note II using XDA DEV
Click to expand...
Click to collapse
No, before. I may do overkill but in twrp I do factory reset, then wipe cache, dalvik, system, then factory reset again, then install rom and gapps, then wipe cache/dalvik and restart. Roms always work perfect for me like this and I get an almost instant GPS lock so I'd say it works great
OP should say HD video not working. Also download link is linked to 10.1 not 10.2.
Sent from my SCH-I605 using Tapatalk 4
I use twrp with this rom
Sent from my SCH-I605 using xda premium
mikeone33 said:
I only see 10.1 on the link provided
http://www.get.cm/?device=i605
Click to expand...
Click to collapse
amoblox said:
8/15 isn't ready yet. It'll show up tonight or tomorrow.
Click to expand...
Click to collapse
DreamFX said:
OP should say HD video not working. Also download link is linked to 10.1 not 10.2.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
2 pages. That's all you had to read. It was already talked about.
Sent from my Spaceship with Tapatalk 2.
KBizzle said:
2 pages. That's all you had to read. It was already talked about.
Sent from my Spaceship with Tapatalk 2.
Click to expand...
Click to collapse
Talked about? Ah no it wasn't. Nothing about link being still linked to 10.1 or HD not working. If I wanted a stupid response I'd ask a stupid question so go away.
DreamFX said:
Talked about? Ah no it wasn't. Nothing about link being still linked to 10.1 or HD not working. If I wanted a stupid response I'd ask a stupid question so go away.
Click to expand...
Click to collapse
Da fuq? You can't read the quotes I posted?? Figures. Lemme repeat it for you. The links are to 10.1 because there isn't a nightly out yet. So... You go away.
Sent from my Spaceship with Tapatalk 2.
DreamFX said:
Talked about? Ah no it wasn't. Nothing about link being still linked to 10.1 or HD not working. If I wanted a stupid response I'd ask a stupid question so go away.
Click to expand...
Click to collapse
The link is to 10.2, it just hasn't been built yet. I've been refreshing all day waiting for it to show up.
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
The three links in the OP that go to TeamHacksung don't work
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.2 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
-----
12/12 update (lots of 12's!): Lots of goodies in this latest build, such as SELinux Enforcing, Materialized Browser, Materialized MMS.apk (Messaging), and possible mobile data fix. Dan and the rest of the CM team have been hard at work. I also included my cherry-picked commit to increase MMS size to 1.2MB max instead of 300KB and 640x480. I've been running this for a few hours tonight and am a big fan. I did do a clean flash since I figured I was due after running so many dirty builds lately, so YMMV with dirty flashing.
12/15 update: more fixes, APNs are now visible, updated/new vendor blobs, I dirty-flashed from 12/12 to this just fine
12/17 update: more fixes/updates including some to various AV items and Gallery, I dirty-flashed from 12/12 to 12/15 to this just fine
12/23 update: I think lots of Bluetooth audio changes, Android 5.0.2, possible VOIP app (Skype/Hangouts/etc) voice fix among other merged commits since 12/17, dirty-flashing should be OK
01/05 update: 560dpi, lots of commits since 12/23, dirty-flashing is A-OK
My noted issues:
- GPS is slow to lock
- seems like duplexing BT audio and BT phone isn't working (e.g. on phone while running Maps navigation and not hearing any turn-by-turn prompts)
- still finicky mobile data from time to time (run su; killall rild once or twice fixes this)
The boot.img in this ZIP has been bumped, but you can bump it again if you are the untrusting sort.
ROM:
Drive mirror (12/12 build): https://drive.google.com/file/d/0B_T4ktHliC57RzVKVERDM3VxbXc/view?usp=sharing
Drive mirror (12/15 build): https://drive.google.com/file/d/0B_T4ktHliC57bTFrTjlIczQ4Q00/view?usp=sharing
Drive mirror (12/17 build): https://drive.google.com/file/d/0B_T4ktHliC57MmFlY2xFYjJreWM/view?usp=sharing
Drive mirror (12/23 build): https://drive.google.com/file/d/0B_T4ktHliC57Q29LanZqTzJtODA/view?usp=sharing
Drive mirror (01/05 build): https://drive.google.com/file/d/0B_T4ktHliC57cnBnOFlHOXRpVmM/view?usp=sharing
"Official builds" by the maintainer Dan/invisiblek - http://www.invisiblek.org/roms/cm-12.0/vs985/
Gapps:
Drive mirror: https://drive.google.com/file/d/0B_T4ktHliC57a1B5UUVYLXZYWjQ/view?usp=sharing
As always, thanks to Dan (@invisiblek) for all of the work and thanks to the Bump! team at CodeFire (@thecubed and the rest). I'm just the build machine here.
Thanks.
Sent from my LG-VS985 using XDA Free mobile app
Been looking forward to Lolipop for awhile. Thanks for letting us try it out!
Awesomeness, thanks OP!
kelmelzer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
-----
I've been running a CM12 build I made with some uncommitted cherry picks from Dan since yesterday, and its still a little flaky but you can give it a shot if you want the bleeding edge. Make sure you are running the Philz recovery and make a nandroid before flashing of course. I did not try to root with SuperSU yet either.
I did a wipe of system/data/cache before flashing and did not do a dirty flash, and YMMV.
My noted issues:
- GPS navigation does not update correctly in Maps but "works"
- Mobile data is flakey and sometimes requires reboots to restore it
- MMS not working at least for me
- Facebook causes soft reboots (may be a Lollipop/Facebook issue in general)
- BT phone did not work, did not test audio
- no root
The boot.img is in this ZIP has been bumped manually by me, but you can bump it again if you are the untrusting sort.
PhilZ Recovery - http://www.invisiblek.org/recovery/vs985/recovery_philz_vs985.img
cm-12-20141122-UNOFFICIAL-vs985.zip - http://gofile.me/2ETOE/iAsxB8oc - This link has a 7 day validity period, so it'll go bye-bye on next Sunday. I will hopefully update the thread with a new build or two before then and generate new links.
gapps-lp-20141109-signed.zip - http://gofile.me/2ETOE/reot7Ivm
As always, thanks to Dan (@invisiblek) for all of the work and thanks to the Bump! team at CodeFire (@thecubed and the rest). I'm just the build machine here.
Click to expand...
Click to collapse
Many thanks to both you, the Codefire/Bump! Team, and invisiblek. We as a community truly appreciate your work and respect you as leaders in development, and as peers. You show a genuine passion and care for both your work and the community you choose to share it with.
Downloading now. Will give as much feedback as possible.
It's looking really good on my phone. Got it to boot up installed the latest super su which is the beta version so I'm now rooted the camera works im getting my lte data. Awesome job bro thanks a lot
rudeboy87 said:
It's looking really good on my phone. Got it to boot up installed the latest super su which is the beta version so I'm now rooted the camera works im getting my lte data. Awesome job bro thanks a lot
Click to expand...
Click to collapse
The dpi was a little whack for me since stuff is so big. I am gonna grab Dan's 480dpi cherrypick and use it in next build I put up.
kelmelzer said:
The dpi was a little whack for me since stuff is so big. I am gonna grab Dan's 480dpi cherrypick and use it in next build I put up.
Click to expand...
Click to collapse
Awesome nice work thanks again
Philz recovery is a mandatory? a no go with twrp?
terminal13 said:
Philz recovery is a mandatory? a no go with twrp?
Click to expand...
Click to collapse
Yes use philz only
rudeboy87 said:
Yes use philz only
Click to expand...
Click to collapse
If philz is required to flash, can you restore prior backups made with twrp on philz? Also if I flash cm12 and try to restore a KitKat ROM do I need to also reflash a KitKat modem? Great work devs for getting a version up for vs985, keep it up!
Sent from my LG-VS985 using XDA Free mobile app
Thanks for the ROM. Being dying to try LP. The download is taking for-e-ver though.. a mirror perhaps?
pahlerc1 said:
If philz is required to flash, can you restore prior backups made with twrp on philz? Also if I flash cm12 and try to restore a KitKat ROM do I need to also reflash a KitKat modem? Great work devs for getting a version up for vs985, keep it up!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
First you'll have to make a back up with philz of your current rom before flashing this. Not sure about the modem part. And yes you can restore your backup
Can someone please mirror the download?
I flash roms all the time but I've honestly never used Philz. Someone with experience care to explain how to transition from a TWRP recovery with CM11 to this? Or does Philz = CWM and am I out of the loop?
Thank you!
Rangizingo said:
I flash roms all the time but I've honestly never used Philz. Someone with experience care to explain how to transition from a TWRP recovery with CM11 to this? Or does Philz = CWM and am I out of the loop?
Thank you!
Click to expand...
Click to collapse
You flash it the same way you flashed TWRP, just using the PhilZ img file instead of the TWRP img.
kelmelzer said:
You flash it the same way you flashed TWRP, just using the PhilZ img file instead of the TWRP img.
Click to expand...
Click to collapse
Nice, seems easy enough then! Should I make a nan before or after you think?
pahlerc1 said:
If philz is required to flash, can you restore prior backups made with twrp on philz? Also if I flash cm12 and try to restore a KitKat ROM do I need to also reflash a KitKat modem? Great work devs for getting a version up for vs985, keep it up!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Modems were not touched by this ROM. TWRP backups are not compatible with PhilZ backups, but they still be there if you ever revert back to TWRP (or when we get a new Lollipop compatible version of TWRP to flash).
Rangizingo said:
I flash roms all the time but I've honestly never used Philz. Someone with experience care to explain how to transition from a TWRP recovery with CM11 to this? Or does Philz = CWM and am I out of the loop?
Thank you!
Click to expand...
Click to collapse
The easiest way to flash philz is to download philz img and place it on your sd card. Then in play store download flashify. While in flashify select recovery image and follow the prompt when your in philz recover pull out battery and reboot back into recover. And wallah bam boom your in philz
---------- Post added at 12:51 AM ---------- Previous post was at 12:49 AM ----------
Oh and music player doesn't work. Google play nor Apollo
kwkw480 said:
Can someone please mirror the download?
Click to expand...
Click to collapse
Was about to request this as well. I'm peaking at around 15kb/s
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATION
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our instructions word by word
- are unfriendly
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 12.1 to your Lg G3 D855, or coming from another ROM:
- Read known issues ans FAQs
- Flash one of the recovery images (CWM, TWRP)
- Copy GApps and CM12.1 ZIPs to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device might be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
- Copy CM12.1 ZIP to your SDCard
- Boot into Recovery
- Flash CM12.1 zip from SDCard
- Reboot
Working:
Click to expand...
Click to collapse
Wifi
Camera
RIL
3G & LTE
Sensors
GPS (maybe)
Bluetooth??
Not Working:
Click to expand...
Click to collapse
Sometimes it does not want to wake up from sleep (like me)
DOWNLOADS
Click to expand...
Click to collapse
Beta 1
5.1 GAPPS: Here
Kernel Sources:
https://github.com/CyanogenMod/android_kernel_lge_g3
Beta 1 22/04/2015:
initial release
RIL wokring
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Thanks!
takis said:
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Click to expand...
Click to collapse
No I'm not ?
Sent from my LG-D855 using XDA Free mobile app
This is what I was waiting a long time ... thank you very much for the work!:victory::victory::victory:
with version 5.1.1 of RAM really the problem is solved?
alejobog said:
This is what I was waiting a long time ... thank you very much for the work!:victory::victory::victory:
with version 5.1.1 of RAM really the problem is solved?
Click to expand...
Click to collapse
Not by the looks of it. There is still a memory leak somewhere
Sent from my LG-D855 using XDA Free mobile app
after a couple of hours worked me everything without problem.
the only thing is that I slowly throughout the system, I think it is normal for being the first version, I hope to go slowly resolving this as and when updates or exit the official version
PD: Bluetooth work ok! GearManager
Nice work!! Seems to be stable. For now I noticed only some double tap to wake issues as you mention
MultiROM support?
Anyone tried this via MultiROM as a 2nd ROM?
Sorry but is ambient display mod in the new builds yet? Can't seem to find... Sorry if missed info... Tyvm
takis said:
Mate are you lifewalker? Sorry if i am wrong... Thanks for this one...
Click to expand...
Click to collapse
Life walker is not on XDA as far as I know but can be found on google+ https://plus.google.com/+LifeWalker/posts
Looks like Lifewalker posted a newer 12.1 build aswell.
Will definitely give OP's build a go as sounds to be pretty stable
Great job.
This ROM work fine. The problem for me is I like me with more settings. Thank you by your good job.
Hi. Is there any chance to fix manual network search?
Looks like some Samsung devices had fix http://review.cyanogenmod.org/#/c/85732/
Could this be also solution for LG?
winxuser said:
Sometimes it does not want to wake up from sleep (like me)
Click to expand...
Click to collapse
Does it happens a lot ?
And, I assume that you need to pull battery if that happens, right ?
Thanks for you work
RL77LUC said:
Does it happens a lot ?
And, I assume that you need to pull battery if that happens, right ?
Thanks for you work
Click to expand...
Click to collapse
I don't have this bug on my d855. Use this build from the release.
Step-han said:
I don't have this bug on my d855. Use this build from the release.
Click to expand...
Click to collapse
No you just have to press the power button again and it will show
Sent from my LG-D855 using XDA Free mobile app
bye bye lg left the phone on the car and the screen is now smashed, touch does not work properly and i dont have the money to fix a screen
and it's not all that a hot day today either - bummer!!
winxuser said:
bye bye lg left the phone on the car and the screen is now smashed, touch does not work properly and i dont have the money to fix a screen
Click to expand...
Click to collapse
How much does it cost there?