I was trying to upgrade my LG Optimus L9 (p769) to Jellybean and have gotten myself into a weird state. When my phone was in its stock ICS I was able to use the offline trick (running the local webserver) to flash a different KDZ on the phone. This KDZ was a european V20B that screwed up the screen (made it flipped all backwards), but the steps didn't warn me that I needed wireless enabled until *after* the flash step. Its impossible to enable anything with a reversed screen.
So, I went and flashed again with the original stock kdz and all went well except the screen was still messed up. So I did a factory hard reset and still nothing.
So now I'm trying to flash the latest factory KDZ (V20H) onto it but the phone isn't picked up by the flash tool in its current state, even though I'm in S/W Upgrade mode.
Anything I can do to fix this? I just want the stock stuff back on and then I'm going to leave it alone
Here is the whole log:
00:51:09 : [C:\LGMobileUpgrade] Try to delete folder
00:51:09 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
00:51:09 : Start Date : 2013-11-15 00:51:09
00:51:09 : ---------- QM Testmode ---------
00:51:09 : ***** Check Tool Version *****
00:51:09 : Tool version : 1.5.4.8
00:51:09 : UpgradeDLL version : 1.2.6.7
00:51:09 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:51:09 : LGE USB Driver Version :
00:51:09 : Android PDLV Version :
00:51:09 : Android NDLV Version :
00:51:09 : ******************************************
00:51:09 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:51:09 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:51:09 : SetEmerModeAT()
00:51:09 : _IsConnectedPhone Call
00:51:19 : _IsConnectedPhone(0)
00:51:19 : 0 - NotConnected.
00:51:19 : 1 - Normal connect success
00:51:19 : 2 - Emergency connect success
00:51:19 : *****CheckOS Start********
00:51:19 : Microsoft_Windows_XP_Home Edition_Service Pack 3
00:51:19 : *****CheckPCSyncPrograms Start*****
00:51:19 : PCSyncPrograms Not Found - OK and ready to upgrade
00:51:19 : Checking the connection with the cell phone...
00:51:19 : dwWaitResetTime(40000 ms)
00:51:20 : _IsConnectedPhone Call00:51:36 : _IsConnectedPhone(0)
00:51:36 : 0 - NotConnected.
00:51:36 : 1 - Normal connect success
00:51:36 : 2 - Emergency connect success
00:51:37 : _IsConnectedPhone Call
00:51:28 : _IsConnectedPhone(0)
00:51:28 : 0 - NotConnected.
00:51:28 : 1 - Normal connect success
00:51:28 : 2 - Emergency connect success
00:51:29 : _IsConnectedPhone Call
00:51:45 : _IsConnectedPhone(0)
00:51:45 : 0 - NotConnected.
00:51:45 : 1 - Normal connect success
00:51:45 : 2 - Emergency connect success
00:51:45 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
00:52:16 : Check Cancel button active..
00:52:16 : Check Cancel button active..
00:52:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:52:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:52:16 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
00:52:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
sontek said:
I was trying to upgrade my LG Optimus L9 (p769) to Jellybean and have gotten myself into a weird state. When my phone was in its stock ICS I was able to use the offline trick (running the local webserver) to flash a different KDZ on the phone. This KDZ was a european V20B that screwed up the screen (made it flipped all backwards), but the steps didn't warn me that I needed wireless enabled until *after* the flash step. Its impossible to enable anything with a reversed screen.
So, I went and flashed again with the original stock kdz and all went well except the screen was still messed up. So I did a factory hard reset and still nothing.
So now I'm trying to flash the latest factory KDZ (V20H) onto it but the phone isn't picked up by the flash tool in its current state, even though I'm in S/W Upgrade mode.
Anything I can do to fix this? I just want the stock stuff back on and then I'm going to leave it alone
Click to expand...
Click to collapse
Don't worry about it, just uninstall your drivers, then reboot your computer and install the drivers. You should be good after that. Then you do the normal offline flash.
sontek said:
I was trying to upgrade my LG Optimus L9 (p769) to Jellybean and have gotten myself into a weird state. When my phone was in its stock ICS I was able to use the offline trick (running the local webserver) to flash a different KDZ on the phone. This KDZ was a european V20B that screwed up the screen (made it flipped all backwards), but the steps didn't warn me that I needed wireless enabled until *after* the flash step. Its impossible to enable anything with a reversed screen.
So, I went and flashed again with the original stock kdz and all went well except the screen was still messed up. So I did a factory hard reset and still nothing.
So now I'm trying to flash the latest factory KDZ (V20H) onto it but the phone isn't picked up by the flash tool in its current state, even though I'm in S/W Upgrade mode.
Anything I can do to fix this? I just want the stock stuff back on and then I'm going to leave it alone
Click to expand...
Click to collapse
KDZ flash program cannot detect your phone in JB firmware. Please search about P769 touch or screen fix in FAQ. There're so many people got this problem, solution is in those threads.
artit said:
KDZ flash program cannot detect your phone in JB firmware. Please search about P769 touch or screen fix in FAQ. There're so many people got this problem, solution is in those threads.
Click to expand...
Click to collapse
Do you have any good links that you recommend? I'm filtering through a lot of content right trying to figure out what is applicable to me
Nathan.7118391 said:
Don't worry about it, just uninstall your drivers, then reboot your computer and install the drivers. You should be good after that. Then you do the normal offline flash.
Click to expand...
Click to collapse
I actually created a brand-new VM with windows XP to try a clean slate and I still have the problem. It doesn't seem to be able to detect with the firmware I currently have on there.
sontek said:
Do you have any good links that you recommend? I'm filtering through a lot of content right trying to figure out what is applicable to me
Click to expand...
Click to collapse
I cannot find P769 thread but this fix should work on P769. http://forum.xda-developers.com/showthread.php?t=2411265
Flash P769 ICS u-boot & x-loader (using lelus' fastboot) and do offline flash again. This time it should detect your phone.
Don't go into software update mode. Keep the phone ON while flashing it, the kdz updater will automatically reboot it into S/W upgrade mode and continue the process.
Sent from my LG-P765 using Tapatalk
Related
Idk if this is a brick or not.
Last night I decided to restore to my stock recovery because I felt I didn't want root anymore. Restored and unrooted. Then I was told there was a software update for the phone Via VM. Proceeded to go through with it but when the phone went to bootloader it crashed on the install and rebooted to CWM (how I don't know)
Now I cannot boot to any system or rom on the phone. The phones system, data, and sd card will not mount via storage and mounts.
I am at a wall. I need some help. Please. I have ADB and superoneclick if needed.
Now also, I cannot go to the bluescreen bootloader via adb.
When I type adb reboot bootloader it reboots the phone back into clockworkmod recovery (where it starts everytime I boot up the phone)
Please help me!
epicb0dyc0unt said:
Idk if this is a brick or not.
Last night I decided to restore to my stock recovery because I felt I didn't want root anymore. Restored and unrooted. Then I was told there was a software update for the phone Via VM. Proceeded to go through with it but when the phone went to bootloader it crashed on the install and rebooted to CWM (how I don't know)
Now I cannot boot to any system or rom on the phone. The phones system, data, and sd card will not mount via storage and mounts.
I am at a wall. I need some help. Please. I have ADB and superoneclick if needed.
Now also, I cannot go to the bluescreen bootloader via adb.
When I type adb reboot bootloader it reboots the phone back into clockworkmod recovery (where it starts everytime I boot up the phone)
Please help me!
Click to expand...
Click to collapse
Dude u are lucky enough that clockworkmod recovery is working just connect to PC and then boot into clockworkmod then choose advanced and then mount USB storage and by then USB will be mounted copy the ROM into sdcard and flash!! search around for stock ROM in zip
Format!! If that doesn't work then use card reader copy ROM and flash!! Or if u can't do this then visit service center of LG!! In my place service center guys are friendly !! Who knows u might be lucky too!!
ayazm.140895 said:
Dude u are lucky enough that clockworkmod recovery is working just connect to PC and then boot into clockworkmod then choose advanced and then mount USB storage and by then USB will be mounted copy the ROM into sdcard and flash!! search around for stock ROM in zip
Format!! If that doesn't work then use card reader copy ROM and flash!! Or if u can't do this then visit service center of LG!! In my place service center guys are friendly !! Who knows u might be lucky too!!
Click to expand...
Click to collapse
yes if recovery is there, you have absolutely no problem
I was born in the '90's... 1290's >
if you want no root and stock gingerbread or stock froyo then simply use kdz method and you have your cwm recovery so you can boot up into emergency mode.. then everything will be restored to back as you have just brought your new p500
Sent from my LG-P500 using xda premium
soft brick
Yep,soft brick...kdz it up,revert to stock than root phone...
Sent from my LG-P500 using xda premium
Stuck in recovery
Hi guys, I own an LG Optimus Slider
And I ended up bricking my phone.
I have CWM 5.0.6.7 on it, and stupid me did a Factory Reset in the regular setting >.< and now the only thing I can get into is CMW recovery, and Emergency Mode.
Anyhow, I've been searching for days now trying to get this phone restored to its original crappy glory.
I've found the KDZ method, had downloaded the original cab file from lg's site, and tried to restore using the KDZ method, but I've been getting stuck at a certain point.. I get an error every time I try and flash it....
14:35:09 : [C:\LGMobileUpgrade] Try to delete folder
14:35:09 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
14:35:09 : Start Date : 2012-03-21 14:35:09
14:35:09 : ---------- QM Testmode ---------
14:35:09 : ***** Check Tool Version *****
14:35:09 : Tool version : 1.5.4.8
14:35:09 : UpgradeDLL version : 1.2.6.7
14:35:09 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
14:35:09 : LGE USB Driver Version :
14:35:09 : Android PDLV Version :
14:35:09 : Android NDLV Version :
14:35:09 : ******************************************
14:35:09 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
14:35:09 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
14:35:09 : SetEmerModeAT()
14:35:09 : _IsConnectedPhone Call
14:35:18 : _IsConnectedPhone(2)
14:35:18 : 0 - NotConnected.
14:35:18 : 1 - Normal connect success
14:35:18 : 2 - Emergency connect success
14:35:18 : *****CheckOS Start********
14:35:18 : Microsoft_Windows7_Home Edition_Service Pack 1
14:35:18 : *****CheckPCSyncPrograms Start*****
14:35:18 : PCSyncPrograms Not Found - OK and ready to upgrade
14:35:18 : Checking the connection with the cell phone...
14:35:18 : dwWaitResetTime(40000 ms)
14:35:19 : Phone Mode(2)
14:35:19 : *****GetPhoneType Start*****
14:35:26 : Phone Type : CDMA
14:35:26 : *****Start GetPreviousStep*****
14:35:26 : _GetPreviousStep(dwStep:0xffff)
14:35:26 : *****GetPhoneBinaryVersion Start*****
14:35:26 : CSE mode -> Version Replace
14:35:26 : *****Get ESN / IMEI / MEID Start*****
14:35:30 : ESN/IMEI/MEID : **MEID REMOVED**
14:35:30 : *****GetPhoneNumber Start*****
14:35:30 : Phone Number : 0000000000
14:35:31 : _GetAuthMark : wAuthMark(23495)
14:35:31 : Wait 3Sec
14:35:34 : _SetAuthMark Ok : wAuthMark(23495), PhoneMode(2)
14:35:34 : Phone type Compare start
14:35:34 : *****CheckPCSyncPrograms Start*****
14:35:35 : PCSyncPrograms Not Found - OK and ready to upgrade
14:35:36 : ****************CheckAndDownload********************
14:35:36 : ******Extract Start C:\Users\Christopher\Downloads\KDZ_FW_UPD_EN2\VM701ZV4_03.S4_03.P61007.kdz*****
14:35:36 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:35:36 : File Size = 108316177
14:35:41 : Extract kdz file Success.
14:35:43 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\VM701ZV4_03.S4_03.P61007.wdb\n
14:35:43 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\VM701ZV4_03.S4_03.P61007.wdb)
14:35:43 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\VM701ZV4_03.S4_03.P61007.wdh\n
14:35:43 : Necessary information not found\n\nPlease contact via **lg website link removed**[009,400,102,102,102].
14:35:43 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
14:35:43 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
14:35:43 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
14:35:43 : CLGMobileHttp Class ¼Ò¸ê...
14:35:43 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:35:43 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
Here's the log exactly as it appears when I try and flash.
Minus the link due to restrictions with my account >.<
This is not using the KDZ_FW_UPD.exe method
This is flashing using the UpTestEX_mod2_marwin.exe method.
Can someone PLEASE help me out >.<
Thanks in advance
-Chris
I've never seen the second method,I'd honestly try using kdz or lgdmp
Sent from my LG-P500 using xda premium
KDZ
The KDZ method is the same as the other method, except it uses the official LG Phone Updater tool instead of KDZ to upgrade the software.
When I try using the KDZ software it freezes after "Unpacking KDZ" <=== inline edit to correct wording
I downloaded the cab file from the official LG website, and had it encrypted into a kdz file using the other method. Then made a copy of both files (for safe keeping just in case anything happened to the ones I was utilizing)
forum.xda-developers.c0m/showthread.php?t=1287236
Got my new LG L9 and, after upgrading to V20B via OTA, I decided to downgrade to V10A to get it rooted (this was before I discovered this thread :/).
Here is what I did:
- I successfully used the KDZ_Flash-Package_LG to downgrade.
- Had to hard reset, then the phone booted fine.
- Rooted using Bin4ry's method
- Installed some L9RecoveryInstaller_1.3.0.apk for CWM (I think this is where I might have f***ed up?)
- Got into CWM recovery just fine, then flashed the lates CM nightlies (from here) +gapps (or maybe this was stupid?)
- Rebooted (wiped all data, cache & dalvik)
Now the phone is stuck at the "Securty Error" screen. The situation:
- Hard reset doesn't help....
- ...but I can get into the S/W screen just fine!
- The devices COM port shows up in device manager
- ...but not the ADB
The LGMobile Support Tool does recognize the device just fine and I can start the phone update process, however, my Internet right now is dead slow, so I'd be waiting for 8 hours for the download to complete (with a chance of things going wrong, again).
I hoped I could flash using the offline KDZ flasher again (as I did previously). However, it keeps complaining that my phone is not connected. I assume this has to do with the fact that the ADB is not initialized?
Anybody knows a way out of this? How to get the ADB up while in S/W mode?
Or at least some feedback on where exactly I made the mistake, so I can learn for the future?
Edit1: Note that I did make a backup of the phone in V10A state, so getting back into recovery would also help!
Edit2: Could this "fastboot" thing help? If I got the phone into fastboot mode, what specifically could I do to unbrick?
Cm won't work without unlocked bootloader. SW is a bit flaky in JB. What you need to do is get p1 (xloader) and p2(uboot) dump from same variant phone as you have. These dumps need to be from ICS then you have to use fastboot to flash them. S/W mode should work fine after that. I'll update my post with more details when I have more time.
Try getting p1 and p2 from someone first
Thank you so much for your response!
Lelus said:
Try getting p1 and p2 from someone first
Click to expand...
Click to collapse
Who would be so kind?
Edit: I played around a little and I already manged to get into fastboot mode following this thread. So all I need now are these p1/p2 dumps? Is there any chance on finding this on the web, in case nobody can provide me with some, here? Also, with "ICE", you mean "ice cream sandwich / ics" version of android, right?
jaaaaaan said:
Thank you so much for your response!
Who would be so kind?
Edit: I played around a little and I already manged to get into fastboot mode following this thread. So all I need now are these p1/p2 dumps? Is there any chance on finding this on the web, in case nobody can provide me with some, here? Also, with "ICE", you mean "ice cream sandwich / ics" version of android, right?
Click to expand...
Click to collapse
Yes, ics. I don't think you can find it on the web. I'll post instructions how to dump p1&2 later.
R: [Q] LG L9 / p760 stuck at "security error". How to get ADB up?
Hi, I can provvide x-loader and u-boot from ICS but I think you need the boot.img (kernel) because you flashed the cm's kernel with locked bootloader and that caused the security error.
Anyway with LG mobile support tool you can configure an http server to download the kdz from your PC (VERY fast).
As soon as I get home I will post x-loader, u-boot and boot.img from ICS
Inviato dal mio LG-P760 con Tapatalk 2
Thank you again for your response! So the backups posted in this thread would not help me, right? I need dumps of unrooted p1/p2's...
@sguerrini97: - almost missed your response , thanks for getting back at me, and thanks for your offer to help me! I'm looking forward to get this fixed again
You are welcome
Here is a boot.img from p760: https://dl.dropbox.com/u/95188513/Android/boot.img
And here is the x-loader: https://dl.dropbox.com/u/95188513/Android/x-loader.img
They are from V10H. Unfortunatly I can't find my dump of ICS' u-boot, anyway I think you only need the boot.img.
Once you get in fastboot mode, run this command:
Code:
fastboot flash boot boot.img
This should fix the security error...
To get adb working you can boot into LG's stock recovery if you didn't flash CWM from fastboot ([vol+] + [home] + [power]).
If you flashed another recovery (not the 2nd-init recovery, but a real recovery) here is the stock recovery.img: https://dl.dropbox.com/u/95188513/Android/recovery.img
You can flash this with fastboot too:
Code:
fastboot flash recovery recovery.img
Keep us updated on your situation
- flashed your boot.img:
- still security error
- flashed both your x-loader.img and the recovery.img you provided:
- still security error
- tried to get into the LG recovery mode anyway:
- YES! ADB Interface in device manager!
- Tried to flash V10A using LGMobile Software Tool (was the only image I ever managed to get offline):
- used "emergency" phone mode
- went through "ANALYSIS" and "DOWNLOAD" without problems...
- ...but now is stuck at 4% of UPDATE for 10 minutes now already
- (log appended)
I'm still having the update open. Should I pull the plug? What to try next? Try again? Different PhoneMode?
Again, thank you so much for your support!
Code:
22:26:07 : [C:\LGMobileUpgrade] Try to delete folder
22:26:07 : Start Date : 2013-03-29 22:26:07
22:26:07 : ---------- QM Testmode ---------
22:26:07 : ***** Check Tool Version *****
22:26:07 : Tool version : 1.5.4.8
22:26:07 : UpgradeDLL version : 1.2.6.7
22:26:07 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
22:26:07 : LGE USB Driver Version :
22:26:07 : Android PDLV Version :
22:26:07 : Android NDLV Version :
22:26:07 : ******************************************
22:26:07 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
22:26:07 : SetEmerModeAT()
22:26:07 : _IsConnectedPhone Call
22:26:23 : _IsConnectedPhone(1)
22:26:23 : 0 - NotConnected.
22:26:23 : 1 - Normal connect success
22:26:23 : 2 - Emergency connect success
22:26:25 : _IsConnectedPhone Call for SmartPhone
22:26:25 : _IsConnectedPhone(0)
22:26:25 : 0 - NotConnected.
22:26:25 : 1 - Normal connect success
22:26:25 : 2 - Emergency connect success
22:26:25 : PhoneÀÌ Notconnect »óÅÂÀ̸ç Port¸¦ ÀâÁö ¸øÇß°í Åë½Å ÇÒ¼ö¾ø´Â »óÅÂÀÓ.
22:26:25 : ¾÷±×·¹À̵å ÇÏ´Ù°¡ ½ÇÆÐÇÑ ±â·ÏÀÌ PC¿¡ ³²¾ÆÀÖÀ¸¸ç Æù°ú Åë½ÅÀ» ÇÒ¼ö ¾ø±â ¶§¹®¿¡
22:26:25 : ȯ°æºÐ¼® ´ë½Å ¸¶Áö¸·¿¡ ¾÷±×·¹À̵带 ½ÃµµÇÑ °ªÀ» °¡Áö°í ¾÷±×·¹ÀÌµå ½Ãµµ¸¦ ÇÔ.
22:26:25 : ȯ°æ ºÐ¼® ºÎºÐÀº Pass ÇÏ°í File download / Decrypt °úÁ¤À¸·Î PassÇÔ.
22:26:25 : *****CheckOS Start********
22:26:25 : Microsoft_Windows_XP_Professional_Service Pack 3
22:26:25 : ÀÎÁõ °Ë»ç ÆĶó¸ÞŸ - ESN_IMEI : , Model :
22:26:25 : Phone type Compare start
22:26:26 : ****************CheckAndDownload********************
22:26:26 : ******Extract Start C:\Users\Jan\Desktop\P760\root\rollback\V10A_00.kdz*****
22:26:26 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
22:26:26 : File Size = 532966984
22:26:38 : Extract kdz file Success.
22:26:47 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
22:26:47 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb)
22:26:53 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP760.dll\n
22:26:53 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP760.dll)
22:26:53 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
22:26:53 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP760.dll)
22:26:53 : Extract End C:\Users\Jan\Desktop\P760\root\rollback\V10A_00.cab
22:26:53 : ------------------Model.dll Information-------------------
22:26:53 : Filename : LGP760.dll
22:26:53 : Version : 0.0.1.0
22:26:53 : File size : 270336
22:26:53 : File date : 2012/06/14-15:49:00
22:26:53 : PC Created date: 2013/03/29-22:26:47
22:26:53 : ----------------------------------------------------------
22:26:53 : *****Check LGCM Programs Start*****
22:26:53 : LGCM Programs Not Found - OK and ready to upgrade
22:26:53 : *****WorkModelDLL Start*****
22:26:54 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
22:26:54 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
22:26:54 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP760.dll)
22:26:54 : _DetachDLL Call
22:26:54 : _DetachDLL Call End
22:26:54 : Call fn_StartUpgrade
The tool didn't find your phone..
Code:
22:26:25 : _IsConnectedPhone([B]0[/B])
22:26:25 : [B]0 - NotConnected[/B].
22:26:25 : 1 - Normal connect success
22:26:25 : 2 - Emergency connect success
LG Mobile support tool is the easiest way..
You should download the last kdz for your IMEI (the version that the tool can find) and place it in:
"C:\shttps\www\swdata\WDLSW\LGP760\XXXXXX\VX0x_00\VX0x_00.kdz" and set the http port to 80.
(Replace Xs with your kdz info, you can grab them from the kdz link).
You should put only one of the two lines in the hosts file, I don't remember whick one but you can try..
LG Mobile Support Tool will connect to the internet but it will "download" the kdz from your PC, it will be very fast.
Sorry for my englesh
Okay, I'm not sure if I'm still doing what I'm supposed to:
To which version of the LG tool are you referring? The original one? The original one in combination with the fake KDZ server?
The folder you are referring to doesn't seem to exist.
Whats with the port? I never set any port before in the KDZ procedures...
Otherwise, I think I get what you mean with the path:
WDLSW/LGP760/ADEUBK/V20b_00/V20B_00.kdz
This file I am already downloading in a DL manager for some time now... (should be finished in 2h )
Next problem: I just tried to go through the regular update (without any offline tricks). It now asks for S/N and IMEI data (which I happily provide). Then update stops immediately:
Updating is not possible any longer due to a fatal
error while the LG Mobile Phone Software Update
Click to expand...
Click to collapse
This is the tutorial with the http server: http://forum.xda-developers.com/showthread.php?p=36351786
If that procedure doesn't work, follow my previous post
Sorry but flashing boot.img will get you nowhere, system partition has been overwritten by cm, best you'll get is bootloop.
I don't know if lg intentionally broke sw mode in JB or why it doesn't work but that's why your phone isn't being detected by lg tool or kdz flasher and you won't be able to fix security error with plain adb.
to dump:
adb shell su -c busybox dd if=/dev/block/mmcblk0p2 of=/sdcard/external_sd/p2.bin
adb shell su -c busybox dd if=/dev/block/mmcblk0p1 of=/sdcard/external_sd/p1.bin
to restore
fastboot flash x-loader p1.bin
fastboot flash u-boot p2.bin
after that software mode will work and your phone should be detected by either lg tool or kdz flasher
@Lelus: You seem to be right... It looked so promising, but indeed, both following the instructions from the GUIDE and the workaround sguerrini97 posted, something always fails...
@sguerrini97: You already helped me sooo much, but do you think you could create those dumps for me? I'm kinda lost here :crying:
Now I've got the PACMAN rom, x-loader and u-boot are the ones from JB, I don't know if they will work..
sguerrini97 said:
Now I've got the PACMAN rom, x-loader and u-boot are the ones from JB, I don't know if they will work..
Click to expand...
Click to collapse
I'm not sure, either... this is mostly new to me, and I know just as much as I learned today (which is already a lot ).
Theoretically you could use xloader and uboot from ics of p765 or p768
Two questions:
Where could I look for people that could help me?
Why is my CWM backup I made from my ICS install (after root, before flashing cm 10.1) not helping?
I have the following files:
Code:
.android_secure.vfat.dup
boot.img
cache.ext4.dup
data.ext4.dup
nandroid.md5
recovery.img
system.ext4.dup
Is system.ext4.dup not what we are looking for? (.dup = dump?), system = x-image? Most of these files are pretty small, though...
You need a backup in .tar format to restore it from adb, you made it in the new CWM format and I don't know if it's possible to restore it from adb. Maybe if you flash my x-loader and my u-boot you will have unlocked bootloader to flash a real recovery to restore it.
sguerrini97 said:
You need a backup in .tar format to restore it from adb, you made it in the new CWM format and I don't know if it's possible to restore it from adb. Maybe if you flash my x-loader and my u-boot you will have unlocked bootloader to flash a real recovery to restore it.
Click to expand...
Click to collapse
You mean your current JB x-loader / u-boot, right? I'm willing to try, could you upload those files?
x-loader: https://dl.dropbox.com/u/95188513/Android/JB/x-loader.img
u-boot: https://dl.dropbox.com/u/95188513/Android/JB/u-boot.img
CWM recovery: http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.2.9-p760.img
You have to flash everything from fastboot:
Code:
fastboot flash x-loader x-loader.img
fastboot flash u-boot u-boot.img
fastboot flash recovery recovery-clockwork-6.0.2.9-p760.img
Then try to enter in recovery with [vol+] + [home] + [power], you should be into CWM.
Hi, I recently flashed JB V20A kdz from Telcel into my P768. After that, I tried to unlock the bootloader with this kdz, but it didn't work (then i read that i needed an unlockable kdz, which is the one that im trying to install nowI). Now im getting this "security error". I tried flashing with the unlockable V20A EUROPE OPEN, but Im getting this error: "The USB and your cellphone are not conected. Please conect your phone and wait for conecting the USB port for a while and press the "Restart" button."
This is the LOG
13:17:25 : [C:\LGMobileUpgrade] Try to delete folder
13:17:25 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
13:17:25 : Start Date : 2013-06-21 13:17:25
13:17:25 : ---------- QM Testmode ---------
13:17:25 : ***** Check Tool Version *****
13:17:25 : Tool version : 1.5.4.8
13:17:25 : UpgradeDLL version : 1.2.6.7
13:17:25 : Current Dir : C:\Documents and Settings\All Users\Datos de programa\LGMOBILEAX\B2C_Client
13:17:25 : LGE USB Driver Version : 4.9.8.1
13:17:25 : Android PDLV Version :
13:17:25 : Android NDLV Version :
13:17:25 : ******************************************
13:17:25 : [C:\Documents and Settings\All Users\Datos de programa\LGMOBILEAX\Phone] Try to delete folder
13:17:25 : RemoveDirectory1 Error(2):C:\Documents and Settings\All Users\Datos de programa\LGMOBILEAX\Phone
13:17:26 : SetEmerModeAT()
13:17:26 : _IsConnectedPhone Call
13:17:36 : _IsConnectedPhone(0)
13:17:36 : 0 - NotConnected.
13:17:36 : 1 - Normal connect success
13:17:36 : 2 - Emergency connect success
13:17:36 : *****CheckOS Start********
13:17:36 : Microsoft_Windows_XP_Home Edition_Service Pack 3
13:17:36 : *****CheckPCSyncPrograms Start*****
13:17:37 : PCSyncPrograms Not Found - OK and ready to upgrade
13:17:37 : Checking the connection with the cell phone...
13:17:37 : dwWaitResetTime(40000 ms)
13:17:38 : _IsConnectedPhone Call
13:17:47 : _IsConnectedPhone(0)
13:17:47 : 0 - NotConnected.
13:17:47 : 1 - Normal connect success
13:17:47 : 2 - Emergency connect success
13:17:48 : _IsConnectedPhone Call
13:17:58 : _IsConnectedPhone(0)
13:17:58 : 0 - NotConnected.
13:17:58 : 1 - Normal connect success
13:17:58 : 2 - Emergency connect success
13:17:59 : _IsConnectedPhone Call
Click to expand...
Click to collapse
This is what I get when I click "Restart"
13:20:06 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
Click to expand...
Click to collapse
I don't know what to do. I know that there is a way to force the update but the tutorials I found are very difficult to follow.
rodrigian said:
Hi, I recently flashed JB V20A kdz from Telcel into my P768. After that, I tried to unlock the bootloader with this kdz, but it didn't work (then i read that i needed an unlockable kdz, which is the one that im trying to install nowI). Now im getting this "security error". I tried flashing with the unlockable V20A EUROPE OPEN, but Im getting this error: "The USB and your cellphone are not conected. Please conect your phone and wait for conecting the USB port for a while and press the "Restart" button."
This is the LOG
This is what I get when I click "Restart"
I don't know what to do. I know that there is a way to force the update but the tutorials I found are very difficult to follow.
Click to expand...
Click to collapse
online upgrade
dhruvbatra205 said:
online upgrade
Click to expand...
Click to collapse
how's that?
you dont change the hosts and dont use shttps
dhruvbatra205 said:
you dont change the hosts and dont use shttps
Click to expand...
Click to collapse
I changed the host file, opened the LG tool, but now the app says that i have the lastest version available. It doesn't let me do the update.
At least now the LG app recognizes my phone
thnx by the way
rodrigian said:
I changed the host file, opened the LG tool, but now the app says that i have the lastest version available. It doesn't let me do the update.
At least now the LG app recognizes my phone
thnx by the way
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showpost.php?p=39879519&postcount=10
thank you both guys!! the lg update app is now downloading the correct firmware, will let you know the results when it finishes
thanks!!!
worked like a charm!! thank you!
Now im having problems trying to install kdz files throw the LG app. It gives me the same error as before..
rodrigian said:
Now im having problems trying to install kdz files throw the LG app. It gives me the same error as before..
Click to expand...
Click to collapse
Is kdz file name all CAPS ?
Lelus said:
Is kdz file name all CAPS ?
Click to expand...
Click to collapse
yup, it's V20C_00.kdz. now im reinstalling all the drivers and necesary apps. will try if this works or not
already reinstaled everything but it isnt working. same error every time. it seems like if the phone is disconecting or something..
rodrigian said:
already reinstaled everything but it isnt working. same error every time. it seems like if the phone is disconecting or something..
Click to expand...
Click to collapse
Try flashing ics xloader and uboot http://forum.xda-developers.com/showthread.php?t=2292828
After that you should definitely be able to use offline method
Lelus said:
Try flashing ics xloader and uboot http://forum.xda-developers.com/showthread.php?t=2292828
After that you should definitely be able to use offline method
Click to expand...
Click to collapse
I have a P768 would it make a difference?
rodrigian said:
I have a P768 would it make a difference?
Click to expand...
Click to collapse
I think that I've included files for p768, but let me know if not
before you answered I fired up fastboot and instaled ics xloader and uboot. It worked. But then i wasn't able to enter the s/w upgrade mode!!!! after a while it entered in s/w mode, but as people say in my country i "cuted nails with my ass (literal translation)" now LG s/w update is working. I don't think i will have any more problems from now on, I really appreciate your help and im willing to donate to you, if you have a paypal account, at least let me buy you a beer !:good:
I apriciate it but it's not necessary.
My optimus L9 (p769) won't power on or charge. I was using it and I hit the lock button and then it just powered off. I tried charing it, jump starting it, and even hard reseting it. None of that worked. The only thing that works is getting into SOFTWARE UPDATE mode. PLEASE, HELP ME! I LOVE THIS PHONE!!!!
Please, anybody. Can you help me?
MikeyMikeLive said:
Please, anybody. Can you help me?
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=39879519&postcount=10
If this doesn't work, it's probably a hardware issue.
Sent from my LG-P769 using xda app-developers app
Lelus said:
Try http://forum.xda-developers.com/showpost.php?p=39879519&postcount=10
Click to expand...
Click to collapse
I hope this works
Hey Lelus, I'm already on V20D, so the update tool won't work. Do you think starting your root method in S/W Update mode might work?
Lelus said:
Try http://forum.xda-developers.com/showpost.php?p=39879519&postcount=10
Click to expand...
Click to collapse
I'm already on v20D, do you think flashing the kdz through the tool used to root will work
MikeyMikeLive said:
I'm already on v20D, do you think flashing the kdz through the tool used to root will work
Click to expand...
Click to collapse
You may need to reflash xloader , uboot first http://forum.xda-developers.com/showthread.php?t=2292828 and any flashing method should work if it isn't a hardware problem
Lelus said:
You may need to reflash xloader , uboot first http://forum.xda-developers.com/showthread.php?t=2292828 and any flashing method should work if it isn't a hardware problem
Click to expand...
Click to collapse
I reflased everything, but it won't power on. And when I put it to charge the charging animation doesn't come up. I don't think it's a hardware problem if I can get in to fastboot and software update mode. I'm still trying to get it to work though
Sounds like a hardware problem to me.
What does it do when you run the offline flash or anything involving the s/w method?
Sent from my LGMS769_C.M.10.1.1 using xda app-developers app
kuma82 said:
Sounds like a hardware problem to me.
What does it do when you run the offline flash or anything involving the s/w method?
Sent from my LGMS769_C.M.10.1.1 using xda app-developers app
Click to expand...
Click to collapse
Since I can't power it on, I can't try the offline flashing method. When I go in to S/W update it doesn't find the phone. This was always a problem. I'll try again though
kuma82 said:
Sounds like a hardware problem to me.
What does it do when you run the offline flash or anything involving the s/w method?
Sent from my LGMS769_C.M.10.1.1 using xda app-developers app
Click to expand...
Click to collapse
01:22:18 : [C:\LGMobileUpgrade] Try to delete folder
01:22:18 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
01:22:18 : Start Date : 2013-07-16 01:22:18
01:22:18 : ---------- QM Testmode ---------
01:22:18 : ***** Check Tool Version *****
01:22:18 : Tool version : 1.5.4.8
01:22:18 : UpgradeDLL version : 1.2.6.7
01:22:18 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
01:22:18 : LGE USB Driver Version : 4.9.8.1
01:22:18 : Android PDLV Version :
01:22:18 : Android NDLV Version : 3.8.0.0
01:22:18 : ******************************************
01:22:18 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:22:18 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
01:22:18 : SetEmerModeAT()
01:22:18 : _IsConnectedPhone Call
01:22:28 : _IsConnectedPhone(0)
01:22:28 : 0 - NotConnected.
01:22:28 : 1 - Normal connect success
01:22:28 : 2 - Emergency connect success
01:22:28 : *****CheckOS Start********
01:22:28 : Microsoft_Windows_Vista_Home Edition_
01:22:28 : *****CheckPCSyncPrograms Start*****
01:22:28 : PCSyncPrograms Not Found - OK and ready to upgrade
01:22:28 : Checking the connection with the cell phone...
01:22:28 : dwWaitResetTime(40000 ms)
01:22:29 : _IsConnectedPhone Call
01:22:37 : _IsConnectedPhone(0)
01:22:37 : 0 - NotConnected.
01:22:37 : 1 - Normal connect success
01:22:37 : 2 - Emergency connect success
01:22:38 : _IsConnectedPhone Call
01:22:45 : _IsConnectedPhone(0)
01:22:45 : 0 - NotConnected.
01:22:45 : 1 - Normal connect success
01:22:45 : 2 - Emergency connect success
01:22:46 : _IsConnectedPhone Call
01:22:53 : _IsConnectedPhone(0)
01:22:53 : 0 - NotConnected.
01:22:53 : 1 - Normal connect success
01:22:53 : 2 - Emergency connect success
01:22:53 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
01:22:57 : Check Cancel button active..
01:22:57 : Check Cancel button active..
01:22:57 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
01:22:57 : Page_Error ºÎºÐÀÔ´Ï´Ù
01:22:58 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
01:22:58 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Oh, and this is my log...
Just remembered I'm post JB and since I can't power on the offline method won't work for me. I can still get in to S/W update mode and fastboot. I tried rebooting from fastboot, that was a no go
Put the offline flash program in XP service pack 3 compatibility mode. And run as admin. I see from your log VISTA
Sent from my LGMS769 using xda app-developers app
It might just be your hardware or the u-boot partition, when I remove the boot and recovery, the phone just loops the lg logo. However, when I remove the u-boot, the phone doesn't respond. I haven't tried putting it in s/w mode. I'll check that next.
I'll try that, but because I have JB on my L9 and I can't power on the offline method isn't working and stops at 15%
Sent from my SGH-T839 using xda app-developers app
MikeyMikeLive said:
I'll try that, but because I have JB on my L9 and I can't power on the offline method isn't working and stops at 15%
Sent from my SGH-T839 using xda app-developers app
Click to expand...
Click to collapse
well if you flashed the x, u, boot, recovery of ice cream, and it doesn't work, nothing i can do for you.
It could be the system partiton or boot partition (probably not).
RemoveDirectory1 Error(2):C:\LGMobileUpgrade
are you running as administrator
it's been awhile since i used the offline flash, I can't remember if this error is normal. I would check if this folder exist C:\LGMobileUpgrade
try removing all files found in C:\ProgramData\LGMOBILEAX (remove lgmobileax folder) uninstall and reinstall all drivers.
kuma82 said:
well if you flashed the x, u, boot, recovery of ice cream, and it doesn't work, nothing i can do for you.
It could be the system partiton or boot partition (probably not).
Click to expand...
Click to collapse
Alright man, thanks for the help
kuma82 said:
well if you flashed the x, u, boot, recovery of ice cream, and it doesn't work, nothing i can do for you.
It could be the system partiton or boot partition (probably not).
Click to expand...
Click to collapse
When you flash the ics x, u, boot, recovery, is the fastboot supposed to end or does it stay in fastboot mode
MikeyMikeLive said:
When you flash the ics x, u, boot, recovery, is the fastboot supposed to end or does it stay in fastboot mode
Click to expand...
Click to collapse
it will end if no other commands are given, after awhile.
I tried the offline and fastboot, and none of them worked. So I guess my phone isn't working anymore. Probably a hardware problem. I'm going to keep trying, and keep you posted
Hello!
Well, direct to point: I was trying to debrand and update my phone. So, reading some tutorials, I find two ways to do this: using KDZ Updater and using a KDZ Offline Update with a script. In both of them was necessary to download a KDZ file from a site. I downloaded it (in my case, V10K_00.KDZ).
I just start the easiest tutorial, KDZ Updater. I installed the latest LG drivers, disable modem, configure the program, etc... but... I always give me an error saying "phone not found", doesn't matter the phone is download mode, recovery or normal mode.
So, I go to second tutorial... I edit the hosts files and started it. This tutorial works with phone in download mode. The phone changed the "download mode" line to "downloading", and at 94% the update process reseted the phone, and at this point my windows find another device, but the drivers wasn't installed. The update process then don't find the phone anymore, asking me to unplug the phone and plug it again. I do this, but it keep asking.
The phone don't turn on anymore. No vibrating at press power, no LG logo, no bootloop. Just nothing. BUT... If I plug it at computer, it still detected by windows! And now, I have TWO situations when I plug it (with or without battery):
1. If I just plug, windows find a LGE AndroidNet USB Modem and a unknow device. About two seconds later, both are desconnected and the unknow device appears again, and only it. The modem don't appear anymore.
2. If I plug pressing volume + and - buttons, the two devices apeears, but one still not recognized.
Then, I unplug the phone and search for the second device driver, using this PID (Vid_0e8d&Pid_0003). Is a "6218 USB Modem Driver", appearing under "ports" on device manager, sometimes with COM5, sometimes with COM4 and so on. I found driver only for WinXP, but it installed correctly.
So, I started the process again with the two situations. First with KDZ Updater, with same problem. With second method, but it give me erros about phone connection, or terminate with an error about general failure.
I tried to restore the phone to original ROM using another tutorial here, using LG Mobile Tools. I uninstalled and undo ALL stuff, clean registry and temp files (with cCleaner), installed the latest drivers again and download the latest version from LG. It detect my phone, but it always give an error saying the battery is not charged enought (in both situations). But the battery is OK, I charged it to 100%!
Now, I don't know what to do. Looking for more tutoriais, I find the LG Flash Tool 1.2, but it don't detect my phone or says "FAIL" on COM port of 6218 USB.
There another way to recover my phone? I have tried to update first in my notebook with Win7 SP1. Later (after the disaster) I tried on WinXP SP3 too. No luck.
Sorry for long post... but is a lot of detais...
Well...
I formatted another PC for tests. Used WinXP SP3, with all updates... But no sucess. Here go log from OfflineInstaller_Fix, if this helps:
Code:
23:08:50 : [C:\LGMobileUpgrade] Try to delete folder
23:08:50 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:08:50 : Start Date : 2014-05-13 23:08:50
23:08:50 : ---------- QM Testmode ---------
23:08:50 : ***** Check Tool Version *****
23:08:50 : Tool version : 1.5.4.8
23:08:50 : UpgradeDLL version : 1.2.6.7
23:08:50 : Current Dir : C:\Documents and Settings\All Users\Dados de aplicativos\LGMOBILEAX\B2C_Client
23:08:50 : LGE USB Driver Version :
23:08:50 : Android PDLV Version :
23:08:50 : Android NDLV Version : 3.10.0.0
23:08:51 : ******************************************
23:08:51 : [C:\Documents and Settings\All Users\Dados de aplicativos\LGMOBILEAX\Phone] Try to delete folder
23:08:51 : RemoveDirectory1 Error(2):C:\Documents and Settings\All Users\Dados de aplicativos\LGMOBILEAX\Phone
23:08:51 : SetEmerModeAT()
23:08:51 : _IsConnectedPhone Call
23:09:05 : _IsConnectedPhone(0)
23:09:05 : 0 - NotConnected.
23:09:05 : 1 - Normal connect success
23:09:05 : 2 - Emergency connect success
23:09:05 : *****CheckOS Start********
23:09:05 : Microsoft_Windows_XP_Professional_Service Pack 3
23:09:05 : *****CheckPCSyncPrograms Start*****
23:09:06 : PCSyncPrograms Not Found - OK and ready to upgrade
23:09:06 : Checking the connection with the cell phone...
23:09:06 : dwWaitResetTime(40000 ms)
23:09:07 : _IsConnectedPhone Call
23:09:18 : _IsConnectedPhone(0)
23:09:18 : 0 - NotConnected.
23:09:18 : 1 - Normal connect success
23:09:18 : 2 - Emergency connect success
23:09:19 : _IsConnectedPhone Call
23:09:31 : _IsConnectedPhone(0)
23:09:31 : 0 - NotConnected.
23:09:31 : 1 - Normal connect success
23:09:31 : 2 - Emergency connect success
23:09:32 : _IsConnectedPhone Call
23:09:44 : _IsConnectedPhone(0)
23:09:44 : 0 - NotConnected.
23:09:44 : 1 - Normal connect success
23:09:44 : 2 - Emergency connect success
23:09:44 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
23:09:47 : Check Cancel button active..
23:09:47 : Check Cancel button active..
23:09:47 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:09:47 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:09:47 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
23:09:47 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Hi, man!
There´s a solution for you!
http://forum.xda-developers.com/showpost.php?p=45988501&postcount=23
A good job for u!
Eder.
reiseb said:
Hi, man!
There´s a solution for you!
http://forum.xda-developers.com/showpost.php?p=45988501&postcount=23
A good job for u!
Eder.
Click to expand...
Click to collapse
Thanks. I already tried this, but no sucess. Tried with another program, LG Flash Tools 1.2, too. Nothing.
Now, I'm thinking about the KDZ I'm using is the problem. I'll try everithing again, with another KDZ, version V10A (the same from my operator). I post the results later.
romulocarlos said:
Thanks. I already tried this, but no sucess. Tried with another program, LG Flash Tools 1.2, too. Nothing.
Now, I'm thinking about the KDZ I'm using is the problem. I'll try everithing again, with another KDZ, version V10A (the same from my operator). I post the results later.
Click to expand...
Click to collapse
Ok! KDZ solution worked fine to me. Got V10B_04.kdz (Oi - Brazil). Device was bricked - Didnt turn on!
reiseb said:
Ok! KDZ solution worked fine to me. Got V10B_04.kdz (Oi - Brazil). Device was bricked - Didnt turn on!
Click to expand...
Click to collapse
Well, phone turns on again. But ONLY with same KDZ version from operator (V10A_04.KDZ).
I'll try with an older unbranded version (V10E_00.KDZ), and post results here.
EDIT: can't download. The link with counter on upperside don't appears. Any problem with the site?
SOLVED!!
I follow this guide: http://forum.xda-developers.com/showpost.php?p=51612244&postcount=2
My phone is now debranded and updated!
Thanks!
romulocarlos said:
SOLVED!!
I follow this guide: http://forum.xda-developers.com/showpost.php?p=51612244&postcount=2
My phone is now debranded and updated!
Thanks!
Click to expand...
Click to collapse
Nice. Worked successful! Got V10B_04.kdz to V10K_00.kdz following solution. Goodbye provider's blootware!
Well... One more problem... I have installed the SIM, and now I have a message saying "emergency calls only".
I don't know why, but both IMEI was changed. Solutions?
Nevermind. IMEI problem solved!
romulocarlos said:
Nevermind. IMEI problem solved!
Click to expand...
Click to collapse
Hi there, i've got that problem.
A friend of mine asked me to fix his phone, it was stuck at booting screen after updating, I don't know how he tried to update, but I solved this one problem, then I was able to root the phone, but after that, it says "emergency calls only".
I don't have this phone anymore.
You can try re-flash to get phone working again, and then try root with Kingo Root.